Attachment 315015 Details for Bug 459408 – dmesg

dmesg

dmesg (text/plain), 48.67 KB, created by Alexey Kuznetsov on 2008-08-26 16:31:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexey Kuznetsov

Created: 2008-08-26 16:31:18 UTC

Size: 48.67 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.272.rc4.fc10.i686 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.3.1 20080801 (Red Hat 4.3.1-6) (GCC) ) #1 SMP Fri Aug 22 13:22:45 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f0ea000 (usable)
> BIOS-e820: 000000007f0ea000 - 000000007f2eb000 (ACPI NVS)
> BIOS-e820: 000000007f2eb000 - 000000007febe000 (ACPI data)
> BIOS-e820: 000000007febe000 - 000000007feef000 (ACPI NVS)
> BIOS-e820: 000000007feef000 - 000000007ff00000 (ACPI data)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>last_pfn = 0x7f0ea max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37d23000 - 37fef791
>DMI 2.4 present.
>ACPI: RSDP 000FE020, 0024 (r2 APPLE )
>ACPI: XSDT 7FEFD1C0, 0074 (r1 APPLE   Apple00       A5       1000013)
>ACPI: FACP 7FEFB000, 00F4 (r3 APPLE   Apple00       A5 Loki       5F)
>ACPI: DSDT 7FEF0000, 48D1 (r1 APPLE  MacBookP    20002 INTL 20050309)
>ACPI: FACS 7FEC0000, 0040
>ACPI: HPET 7FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: APIC 7FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: MCFG 7FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ASF! 7FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F)
>ACPI: SBST 7FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: ECDT 7FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
>ACPI: SSDT 7FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
>ACPI: SSDT 7FEBD000, 064F (r1 SataRe  SataPri     1000 INTL 20050309)
>ACPI: SSDT 7FEBC000, 069C (r1 SataRe  SataSec     1000 INTL 20050309)
>ACPI: DMI detected: Apple
>1136MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000e7d59c]    TEXT DATA BSS ==> [0000400000 - 0000e7d59c]
>  #4 [0037d23000 - 0037fef791]          RAMDISK ==> [0037d23000 - 0037fef791]
>  #5 [0000e7e000 - 0000e94000]    INIT_PG_TABLE ==> [0000e7e000 - 0000e94000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0007f0ea
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f0ea
>On node 0 totalpages: 520329
>free_area_init_node: node 0, pgdat c07c2100, node_mem_map c1001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 287070 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 1221024 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513213
>Kernel command line: ro root=UUID=17050de4-c9bc-4938-9615-090c227ce8fb rhgb quiet
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c098e000 soft=c096e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 2161.254 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 2463 kB
> per task-struct memory footprint: 1920 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2034800k/2081704k available (2662k kernel code, 45604k reserved, 1384k data, 1484k init, 1164200k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07f8000 - 0xc096b000   (1484 kB)
>      .data : 0xc0699bf0 - 0xc07f3d48   (1384 kB)
>      .text : 0xc0400000 - 0xc0699bf0   (2662 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.50 BogoMIPS (lpj=2161254)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>lockdep: fixing up alternatives.
>CPU 1 irqstacks, hard=c098f000 soft=c096f000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4322.31 BogoMIPS (lpj=2161157)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (8644.82 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5296 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
>  groups: 1 0
>khelper used greatest stack depth: 2632 bytes left
>net_namespace: 912 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:46:11  Date: 08/26/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
>PCI: MCFG area at f0000000 reserved in E820
>PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:01.0 io port: [3000, 3fff]
>PCI: bridge 0000:00:01.0 32bit mmio: [90300000, 903fffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [80000000, 87ffffff]
>pci 0000:02:00.0: supports D1
>pci 0000:02:00.0: supports D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
>PCI: bridge 0000:00:1c.0 32bit mmio: [90200000, 902fffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>pci 0000:03:00.0: PME# disabled
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.1. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:1c.1 32bit mmio: [90100000, 901fffff]
>PCI: bridge 0000:00:1c.2 io port: [1000, 1fff]
>PCI: bridge 0000:00:1c.2 32bit mmio: [8c100000, 900fffff]
>PCI: bridge 0000:00:1c.2 64bit mmio pref: [88000000, 8bffffff]
>pci 0000:0c:03.0: supports D1
>pci 0000:0c:03.0: supports D2
>pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:0c:03.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 32bit mmio: [8c000000, 8c0fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.2 BAR 7 (0x1000-0x1fff), disabling
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>system 00:07: ioport range 0x680-0x6ef has been reserved
>system 00:07: ioport range 0x800-0x80f has been reserved
>system 00:07: ioport range 0x810-0x817 has been reserved
>system 00:07: ioport range 0x400-0x47f has been reserved
>system 00:07: ioport range 0x500-0x53f has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x3000-0x3fff
>pci 0000:00:01.0:   MEM window: 0x90300000-0x903fffff
>pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000087ffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1c.0:   MEM window: 0x90200000-0x902fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000090500000-0x000000905fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.2:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.2:   MEM window: 0x8c100000-0x900fffff
>pci 0000:00:1c.2:   PREFETCH window: 0x00000088000000-0x0000008bffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0x8c000000-0x8c0fffff
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: power state changed by ACPI to D0
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [3000, 3fff]
>bus: 01 index 1 mmio: [90300000, 903fffff]
>bus: 01 index 2 mmio: [80000000, 87ffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 io port: [2000, 2fff]
>bus: 02 index 1 mmio: [90200000, 902fffff]
>bus: 02 index 2 mmio: [90500000, 905fffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [90100000, 901fffff]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [1000, 1fff]
>bus: 04 index 1 mmio: [8c100000, 900fffff]
>bus: 04 index 2 mmio: [88000000, 8bffffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 0c index 0 mmio: [0, 0]
>bus: 0c index 1 mmio: [8c000000, 8c0fffff]
>bus: 0c index 2 mmio: [0, 0]
>bus: 0c index 3 io port: [0, ffff]
>bus: 0c index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
> it is
>debug: unmapping init memory f7d23000..f7ff0000
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219736771.739:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1702
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010
>pci 0000:00:1d.3: Performing full reset
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: SSDT 7FEB8C10, 02AE (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
>ACPI: SSDT 7FEB8910, 02A0 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FEB8F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
>ACPI: SSDT 7FEB7F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>khelper used greatest stack depth: 2628 bytes left
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input4
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90405400
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 2: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 4: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 6: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 7: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 8 chg 00d6 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 2 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 2 not reset yet, waiting 50ms
>uhci_hcd 0000:00:1d.0: port 1 portsc 01ab,00
>hub 2-0:1.0: port 1: status 0301 change 0003
>uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00
>hub 2-0:1.0: port 2: status 0101 change 0003
>ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 4 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>ehci_hcd 0000:00:1d.7: port 4 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
>uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
>usb 1-4: uevent
>usb 1-4: usb_probe_device
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: adding 1-4:1.0 (config #1, interface 0)
>usb 1-4:1.0: uevent
>drivers/usb/core/inode.c: creating file '004'
>usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
>usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 6 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 6 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
>uhci_hcd 0000:00:1d.2: port 2 portsc 009b,00
>hub 4-0:1.0: port 2: status 0101 change 0003
>ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt fe80
>hub 2-0:1.0: state 7 ports 2 chg 0006 evt 0000
>hub 2-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00
>hub 5-0:1.0: port 1: status 0101 change 0003
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.272.rc4.fc10.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: No controller found.
>usb 2-1: skipped 1 descriptor after interface
>mice: PS/2 mouse device common for all mice
>usb 2-1: default language 0x0409
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Marking TSC unstable due to TSC halts in idle
>usb 2-1: uevent
>usb 2-1: usb_probe_device
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>usb 2-1:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 2-1: New USB device found, idVendor=046d, idProduct=c01b
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB-PS/2 Optical Mouse
>usb 2-1: Manufacturer: Logitech
>hub 2-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>Clocksource tsc unstable (delta = -213857434 ns)
>usb 2-2: ep0 maxpacket = 8
>usb 2-2: USB quirks for this device: 2
>usb 2-2: skipped 1 descriptor after interface
>usb 2-2: skipped 1 descriptor after interface
>usb 2-2: skipped 1 descriptor after interface
>usb 2-2: default language 0x0409
>usb 2-2: uevent
>usb 2-2: usb_probe_device
>usb 2-2: configuration #1 chosen from 1 choice
>usb 2-2: adding 2-2:1.0 (config #1, interface 0)
>usb 2-2:1.0: uevent
>usb 2-2: adding 2-2:1.1 (config #1, interface 1)
>usb 2-2:1.1: uevent
>usb 2-2: adding 2-2:1.2 (config #1, interface 2)
>usb 2-2:1.2: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 2-2: New USB device found, idVendor=05ac, idProduct=021a
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Apple Internal Keyboard / Trackpad
>usb 2-2: Manufacturer: Apple Computer
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 2 chg 0004 evt 0000
>hub 4-0:1.0: port 2, status 0101, change 0000, 12 Mb/s
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: ep0 maxpacket = 8
>usb 4-2: skipped 1 descriptor after interface
>usb 4-2: default language 0x0409
>usb 4-2: uevent
>usb 4-2: usb_probe_device
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: adding 4-2:1.0 (config #1, interface 0)
>usb 4-2:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 4-2: New USB device found, idVendor=05ac, idProduct=8240
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: IR Receiver
>usb 4-2: Manufacturer: Apple Computer, Inc.
>hub 5-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 5-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb usb3: suspend_rh (auto-stop)
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: skipped 1 descriptor after interface
>usb 5-1: uevent
>usb 5-1: usb_probe_device
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>usb 5-1:1.0: uevent
>usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>usb 5-1:1.1: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
>usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004
>usbcore: registered new interface driver hiddev
>usbhid 2-1:1.0: usb_probe_interface
>usbhid 2-1:1.0: usb_probe_interface - got id
>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
>input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
>usbhid 2-2:1.0: usb_probe_interface
>usbhid 2-2:1.0: usb_probe_interface - got id
>input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
>uhci_hcd 0000:00:1d.0: reserve dev 3 ep83-INT, period 8, phase 4, 17 us
>input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>usbhid 2-2:1.1: usb_probe_interface
>usbhid 2-2:1.1: usb_probe_interface - got id
>usbhid 2-2:1.2: usb_probe_interface
>usbhid 2-2:1.2: usb_probe_interface - got id
>input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.2/input/input7
>uhci_hcd 0000:00:1d.0: reserve dev 3 ep84-INT, period 8, phase 4, 12 us
>input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
>usbhid 4-2:1.0: usb_probe_interface
>usbhid 4-2:1.0: usb_probe_interface - got id
>drivers/usb/core/file.c: looking for a minor, starting at 96
>hiddev96hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
>usbhid 5-1:1.0: usb_probe_interface
>usbhid 5-1:1.0: usb_probe_interface - got id
>input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8
>uhci_hcd 0000:00:1d.3: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>input,hidraw4: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
>usbhid 5-1:1.1: usb_probe_interface
>usbhid 5-1:1.1: usb_probe_interface - got id
>input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9
>input,hidraw5: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:941:774
>mem zero: hash matches
>debug: unmapping init memory c07f8000..c096b000
>Write protecting the kernel read-only data: 1144k
>[drm] Initialized drm 1.1.0 20060810
>modprobe used greatest stack depth: 2580 bytes left
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:01:00.0: setting latency timer to 64
>ATOM BIOS: M56P M59 ATOM BIOS 423e/450m                                                
>[drm] Detected VRAM RAM=131072K, accessible=131072K, BAR=131072K
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>03 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>pci 0000:01:00.0: LVDS-1: EDID invalid.
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>pci 0000:01:00.0: DVI-I-1: no EDID data
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>pci 0000:01:00.0: DVI-I-2: no EDID data
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>i2c-adapter i2c-1: unable to read EDID block.
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>pci 0000:01:00.0: DVI-I-1: no EDID data
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>i2c-adapter i2c-2: unable to read EDID block.
>pci 0000:01:00.0: DVI-I-2: no EDID data
>allocated f6ae9030 1440x900 fb: 0x00018000, bo f61e1770
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 180x56
>executing set pll
>executing set crtc timing
>[drm] LVDS-6: set mode 1440x900 e
>executing set LVDS encoder
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Loading R500 Microcode
>[drm] Num pipes: 1
>[drm] writeback test succeeded in 1 usecs
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>modprobe used greatest stack depth: 1316 bytes left
>pata_acpi 0000:00:1f.1: power state changed by ACPI to D0
>pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pata_acpi 0000:00:1f.1: setting latency timer to 64
>pata_acpi 0000:00:1f.1: PCI INT A disabled
>pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>pata_acpi 0000:00:1f.2: setting latency timer to 64
>pata_acpi 0000:00:1f.2: PCI INT B disabled
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: power state changed by ACPI to D0
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
>ata1.00: ATAPI: MATSHITADVD-R   UJ-857D, KCVB, max UDMA/66
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857D  KCVB PQ: 0 ANSI: 5
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
>ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
>ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
>ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.01: configured for UDMA/100
>scsi 2:0:1:0: Direct-Access     ATA      FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
>sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
>sd 2:0:1:0: [sda] Write Protect is off
>sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 sda5
>sd 2:0:1:0: [sda] Attached SCSI disk
>sd 2:0:1:0: Attached scsi generic sg1 type 0
>modprobe used greatest stack depth: 732 bytes left
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda3: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 163906
>EXT3-fs: sda3: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1219736786.098:2): selinux=0 auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-1: uevent
>usb 2-1:1.0: uevent
>usb 2-2: uevent
>usb 2-2:1.0: uevent
>usb 2-2:1.1: uevent
>usb 2-2:1.2: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb 4-2: uevent
>usb 4-2:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb 5-1: uevent
>usb 5-1:1.0: uevent
>usb 5-1:1.1: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-4: uevent
>usb 1-4:1.0: uevent
>usb usb3: usb auto-resume
>usb usb3: wakeup_rh
>hub 3-0:1.0: hub_resume
>hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
>hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
>hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
>usb 1-4: USB disconnect, address 4
>usb 1-4: unregistering device
>usb 1-4: usb_disable_device nuking all URBs
>usb 1-4: unregistering interface 1-4:1.0
>usb 1-4:1.0: uevent
>usb 1-4: uevent
>intel_rng: FWH not detected
>input: PC Speaker as /devices/platform/pcspkr/input/input10
>usb usb3: suspend_rh (auto-stop)
>usbcore: registered new interface driver isight_firmware
>firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>iTCO_vendor_support: vendor-support=0
>firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10
>appletouch 2-2:1.1: usb_probe_interface
>appletouch 2-2:1.1: usb_probe_interface - got id
>appletouch: Geyser mode initialized.
>input: appletouch as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input11
>sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>sky2 0000:02:00.0: setting latency timer to 64
>sky2 0000:02:00.0: v1.22 addr 0x90200000 irq 16 Yukon-2 EC rev 2
>sky2 eth0: addr 00:17:f2:d1:4a:84
>usbcore: registered new interface driver appletouch
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: AC Adapter [ADP1] (on-line)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input12
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
>ACPI: Device needs an ACPI driver
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
>firewire_core: created device fw0: GUID 0019e3fffe6db0f2, S800
>hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
>ath9k: 0.1
>ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ath9k 0000:03:00.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: port 4 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
>phy0: Selected rate control algorithm 'ath9k_rate_control'
>usb 1-4: new high speed USB device using ehci_hcd and address 7
>ehci_hcd 0000:00:1d.7: port 4 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT
>usb 1-4: skipped 1 descriptor after configuration
>usb 1-4: skipped 4 descriptors after interface
>usb 1-4: skipped 1 descriptor after endpoint
>usb 1-4: skipped 5 descriptors after interface
>usb 1-4: default language 0x0409
>usb 1-4: uevent
>usb 1-4: usb_probe_device
>usb 1-4: configuration #1 chosen from 1 choice
>usb 1-4: adding 1-4:1.0 (config #1, interface 0)
>usb 1-4:1.0: uevent
>usb 1-4: adding 1-4:1.1 (config #1, interface 1)
>usb 1-4:1.1: uevent
>drivers/usb/core/inode.c: creating file '007'
>usb 1-4: New USB device found, idVendor=05ac, idProduct=8501
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-4: Product: Built-in iSight
>usb 1-4: Manufacturer: Micron
>phy0: Atheros 5416: mem=0xf91c0000, irq=17
>Linux video capture interface: v2.00
>uvcvideo 1-4:1.0: usb_probe_interface
>uvcvideo 1-4:1.0: usb_probe_interface - got id
>uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
>uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
>input: Built-in iSight as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input13
>usb 1-4: link qh64-0001/f66cf100 start 63 [1/0 us]
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_intel.c:2074: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:755: codec_mask = 0x1
>ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model 'intel-mac-auto' is selected for config 8384:7680 (Mac)
>hda_codec: STAC922x, Apple subsys_id=106b1e00
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0a pin config 0121e21f
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0b pin config 90a7012e
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0c pin config 9017e110
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0d pin config 400000fd
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0e pin config 400000fe
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 0f pin config 0181e020
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 10 pin config 1145e230
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 11 pin config 11c5e240
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 15 pin config 400000fc
>ALSA sound/pci/hda/patch_sigmatel.c:1845: hda_codec: pin nid 1b pin config 400000fb
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1 (0xc/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0xb, fmic=0x0, line=0xf, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/patch_sigmatel.c:2254: stac92xx_add_dyn_out_pins: total dac count=4
>ALSA sound/pci/hda/patch_sigmatel.c:2376: dac_nids=3 (0x3/0x5/0x4/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave External Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker2 Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Side Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave External Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker2 Playback Switch, skipped
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>usb usb3: suspend_rh
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2097144k swap on /var/swap.  Priority:-1 extents:1375 across:15265456k

Actions: View

Attachments on bug 459408: 315015