Attachment 315057 Details for Bug 459523 – /var/log/dmesg from the kernel that wouldn't boot

/var/log/dmesg from the kernel that wouldn't boot

last-dmesg.txt (text/plain), 48.80 KB, created by Tom Horsley on 2008-08-26 22:42:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Horsley

Created: 2008-08-26 22:42:23 UTC

Size: 48.80 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.166.rc0.git8.fc10.x86_64 (mockbuild@x86-6) (gcc version 4.3.1 20080708 (Red Hat 4.3.1-4) (GCC) ) #1 SMP Mon Jul 21 20:39:59 EDT 2008
>Command line: ro root=UUID=f490caac-f7e5-416d-bb4e-8a02dba48e1d quiet audit=0 selinux=0 8250.nr_uarts=9
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fff0000 page 4k
>kernel direct mapping tables up to 7fff0000 @ 8000-c000
>last_map_addr: 7fff0000 end: 7fff0000
>RAMDISK: 37c14000 - 37fef1f8
>DMI 2.2 present.
>ACPI: RSDP 000F7A70, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF3180, 5EE0 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SSDT 7FFF9180, 01CA (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 7FFF93C0, 00A0 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 7FFF94C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FFF90C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0x0, 0x9f) 0 entries of 25600 used
>SRAT: Node 0 PXM 0 100000-80000000
>Entering add_active_range(0, 0x100, 0x7fff0) 1 entries of 25600 used
>NUMA: Allocated memnodemap from a000 - b080
>NUMA: Using 20 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000007fff0000
>  NODE_DATA [000000000000b080 - 000000000002007f]
>  bootmap [0000000000021000 -  0000000000030fff] pages 10
>(7 early reservations) ==> bootmem [0000000000 - 007fff0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000e56568]    TEXT DATA BSS ==> [0000200000 - 0000e56568]
>  #3 [0037c14000 - 0037fef1f8]          RAMDISK ==> [0037c14000 - 0037fef1f8]
>  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>  #6 [000000a000 - 000000b080]       MEMNODEMAP ==> [000000a000 - 000000b080]
>Scan SMP from ffff880000000000 for 1024 bytes.
>Scan SMP from ffff88000009fc00 for 1024 bytes.
>Scan SMP from ffff8800000f0000 for 65536 bytes.
>found SMP MP-table at [ffff8800000f38f0] 000f38f0
> [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001200000-ffff8800041fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fff0
>On node 0 totalpages: 524175
>  DMA zone: 96 pages used for memmap
>  DMA zone: 3262 pages reserved
>  DMA zone: 641 pages, LIFO batch:0
>  DMA32 zone: 12192 pages used for memmap
>  DMA32 zone: 507984 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Bus #0 is ISA
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PERCPU: Allocating 442304 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>Node to cpumask map at ffff880000032000 for 1 nodes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 508625
>Policy zone: DMA32
>Kernel command line: ro root=UUID=f490caac-f7e5-416d-bb4e-8a02dba48e1d quiet audit=0 selinux=0 8250.nr_uarts=9
>audit: disabled (after initialization)
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Detected 2211.328 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1840 kB
> per task-struct memory footprint: 3456 bytes
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 8872000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 2029676k/2097088k available (3060k kernel code, 67024k reserved, 1753k data, 1544k init)
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. <6>4422.65 BogoMIPS (lpj=2211328)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Using local APIC timer interrupts.
>APIC timer calibration result 12564388
>Detected 12.564 MHz APIC timer.
>++++++++++++++++++++=_---CPU UP  1
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 6000
>Setting warm reset code and vector.
>1.
>2.
>3.
>Asserting INIT.
>Waiting for send to finish...
>Deasserting INIT.
>Waiting for send to finish...
>#startup loops: 2.
>Sending STARTUP #1.
>After apic_write.
>Initializing CPU#1
>CPU#1 (phys ID: 1) waiting for CALLOUT
>Startup point 1.
>Waiting for send to finish...
>Sending STARTUP #2.
>After apic_write.
>Startup point 1.
>Waiting for send to finish...
>After Startup.
>Before Callout 1.
>After Callout 1.
>CALLIN, before setup_local_APIC().
>Calibrating delay using timer specific routine.. <6>4422.62 BogoMIPS (lpj=2211311)
>Stack at about ffff88007f025f44
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>OK.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>CPU has booted.
>Brought up 2 CPUs
>Boot done.
>Before bogomips.
>Total of 2 processors activated (8845.27 BogoMIPS).
>Before bogocount - setting activated=1.
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=9528 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>khelper used greatest stack depth: 5680 bytes left
>net_namespace: 1576 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 21:16:39  Date: 08/26/08
>NET: Registered protocol family 16
>No dock devices found.
>khelper used greatest stack depth: 4984 bytes left
>node 0 link 0: io port [9000, ffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, febfffff]
>node 0 link 0: mmio [e0000000, e05fffff]
>bus: [00,05] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [80000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:04.0: supports D1
>pci 0000:00:04.0: supports D2
>pci 0000:00:0a.0: supports D1
>pci 0000:00:0a.0: supports D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:01:09.0: supports D2
>pci 0000:01:09.0: PME# supported from D0 D2 D3hot
>pci 0000:01:09.0: PME# disabled
>pci 0000:01:09.1: supports D2
>pci 0000:01:09.1: PME# supported from D0 D2 D3hot
>pci 0000:01:09.1: PME# disabled
>pci 0000:01:0a.0: supports D2
>pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold
>pci 0000:01:0a.0: PME# disabled
>pci 0000:00:09.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: Cannot allocate resource region 3 of device 0000:05:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x4080-0x40ff has been reserved
>system 00:01: ioport range 0x4400-0x447f has been reserved
>system 00:01: ioport range 0x4480-0x44ff has been reserved
>system 00:01: ioport range 0x4800-0x487f has been reserved
>system 00:01: ioport range 0x4880-0x48ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
>system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
>Switched to high resolution mode on CPU 0
>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:09.0:   IO window: 0xd000-0xdfff
>pci 0000:00:09.0:   MEM window: 0xfe900000-0xfe9fffff
>pci 0000:00:09.0:   PREFETCH window: 0x000000fea00000-0x000000feafffff
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: 0xc000-0xcfff
>pci 0000:00:0b.0:   MEM window: 0xfe800000-0xfe8fffff
>pci 0000:00:0b.0:   PREFETCH window: 0x000000fe700000-0x000000fe7fffff
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: 0xb000-0xbfff
>pci 0000:00:0c.0:   MEM window: 0xfe600000-0xfe6fffff
>pci 0000:00:0c.0:   PREFETCH window: 0x000000fe500000-0x000000fe5fffff
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: 0xa000-0xafff
>pci 0000:00:0d.0:   MEM window: 0xfe400000-0xfe4fffff
>pci 0000:00:0d.0:   PREFETCH window: 0x000000fe300000-0x000000fe3fffff
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: 0x9000-0x9fff
>pci 0000:00:0e.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:0e.0:   PREFETCH window: 0x000000b0000000-0x000000cfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 1
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory ffff880037c14000..ffff880037ff0000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219785399.649:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3964
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:05:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pcieport-driver 0000:00:0b.0: found MSI capability
>pci_express 0000:00:0b.0:pcie00: allocate port service
>pci_express 0000:00:0b.0:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>pcieport-driver 0000:00:0c.0: found MSI capability
>pci_express 0000:00:0c.0:pcie00: allocate port service
>pci_express 0000:00:0c.0:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>pcieport-driver 0000:00:0d.0: found MSI capability
>pci_express 0000:00:0d.0:pcie00: allocate port service
>pci_express 0000:00:0d.0:pcie03: allocate port service
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>pcieport-driver 0000:00:0e.0: found MSI capability
>pci_express 0000:00:0e.0:pcie00: allocate port service
>pci_express 0000:00:0e.0:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: ACPI0007:01 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver9 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>serial 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS4: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS4 at I/O 0xdf00 (irq = 17) is a 16C950/954
>ttyS5: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS5 at I/O 0xdf08 (irq = 17) is a 16C950/954
>ttyS6: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS6 at I/O 0xdf10 (irq = 17) is a 16C950/954
>ttyS7: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS7 at I/O 0xdf18 (irq = 17) is a 16C950/954
>Pin 2-17 already programmed
>serial 0000:01:09.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS8: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS8 at I/O 0xdd00 (irq = 17) is a 16C950/954
>ttyS1: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS1 at I/O 0xdd08 (irq = 17) is a 16C950/954
>ttyS2: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS2 at I/O 0xdd10 (irq = 17) is a 16C950/954
>ttyS3: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS3 at I/O 0xdd18 (irq = 17) is a 16C950/954
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:913:298
>debug: unmapping init memory ffffffff814e2000..ffffffff81664000
>Write protecting the kernel read-only data: 1380k
>plymouthd used greatest stack depth: 4768 bytes left
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: reset hcs_params 0x10148a dbg=1 cc=1 pcc=4 !ppc ports=10
>ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 
>ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: bogus port configuration: cc=1 x pcc=4 < ports=10
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: supports USB remote wakeup
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfebfe000
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.1: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>modprobe used greatest stack depth: 4024 bytes left
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: supports USB remote wakeup
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 0100020a POTPGT=1 NPS NDP=10(10)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 1 high speed
>ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.166.rc0.git8.fc10.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>USB Universal Host Controller Interface driver v3.0
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pata_acpi 0000:00:07.0: PCI INT A disabled
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>pata_acpi 0000:00:08.0: PCI INT A disabled
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>ehci_hcd 0000:00:02.1: port 1 high speed
>ehci_hcd 0000:00:02.1: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
>usb 1-1: skipped 1 descriptor after configuration
>usb 1-1: skipped 11 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 20 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 4 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: skipped 2 descriptors after interface
>usb 1-1: skipped 1 descriptor after endpoint
>usb 1-1: default language 0x0409
>usb 1-1: uevent
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>usb 1-1:1.0: uevent
>usb 1-1: adding 1-1:1.1 (config #1, interface 1)
>usb 1-1:1.1: uevent
>usb 1-1: adding 1-1:1.2 (config #1, interface 2)
>usb 1-1:1.2: uevent
>usb 1-1: adding 1-1:1.3 (config #1, interface 3)
>usb 1-1:1.3: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 1-1: New USB device found, idVendor=046d, idProduct=08c9
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-1: SerialNumber: E0E377C3
>ehci_hcd 0000:00:02.1: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 3 high speed
>ehci_hcd 0000:00:02.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>ehci_hcd 0000:00:02.1: port 3 high speed
>ehci_hcd 0000:00:02.1: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>usb 1-3: default language 0x0409
>usb 1-3: uevent
>usb 1-3: usb_probe_device
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>usb 1-3:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 1-3: New USB device found, idVendor=067b, idProduct=2507
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: Product: ATAPI-6 Bridge Controller
>usb 1-3: Manufacturer: Prolific Technology Inc.
>usb 1-3: SerialNumber: 131402D6
>ehci_hcd 0000:00:02.1: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 5 full speed --> companion
>ehci_hcd 0000:00:02.1: GetStatus port 5 status 003001 POWER OWNER sig=se0 CONNECT
>hub 1-0:1.0: port 5 not reset yet, waiting 50ms
>ehci_hcd 0000:00:02.1: GetStatus port 5 status 003802 POWER OWNER sig=j CSC
>ehci_hcd 0000:00:02.1: GetStatus port 6 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 6 low speed --> companion
>ehci_hcd 0000:00:02.1: GetStatus port 6 status 003402 POWER OWNER sig=k CSC
>ehci_hcd 0000:00:02.1: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 7 full speed --> companion
>ehci_hcd 0000:00:02.1: GetStatus port 7 status 003001 POWER OWNER sig=se0 CONNECT
>hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>ehci_hcd 0000:00:02.1: GetStatus port 7 status 003802 POWER OWNER sig=j CSC
>ehci_hcd 0000:00:02.1: GetStatus port 10 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 10, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 10: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:02.1: port 10 low speed --> companion
>ehci_hcd 0000:00:02.1: GetStatus port 10 status 003402 POWER OWNER sig=k CSC
>hub 2-0:1.0: state 7 ports 10 chg 0000 evt ffe0
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00010101 CSC PPS CCS
>hub 2-0:1.0: port 5, status 0101, change 0001, 12 Mb/s
>hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x101
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
>usb 2-5: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [4] = 0x00100103 PRSC PPS PES CCS
>usb 2-5: ep0 maxpacket = 8
>usb 2-5: uevent
>usb 2-5: usb_probe_device
>usb 2-5: configuration #1 chosen from 1 choice
>usb 2-5: adding 2-5:1.0 (config #1, interface 0)
>usb 2-5:1.0: uevent
>hub 2-5:1.0: usb_probe_interface
>hub 2-5:1.0: usb_probe_interface - got id
>hub 2-5:1.0: USB hub found
>hub 2-5:1.0: 4 ports detected
>hub 2-5:1.0: standalone hub
>hub 2-5:1.0: individual port power switching
>hub 2-5:1.0: individual port over-current protection
>hub 2-5:1.0: power on to power good time: 100ms
>hub 2-5:1.0: local power source is good
>hub 2-5:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '002'
>usb 2-5: New USB device found, idVendor=0557, idProduct=7000
>usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00010301 CSC LSDA PPS CCS
>hub 2-0:1.0: port 6, status 0301, change 0001, 1.5 Mb/s
>hub 2-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-6: new low speed USB device using ohci_hcd and address 3
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-6: skipped 1 descriptor after interface
>usb 2-6: default language 0x0409
>sata_nv 0000:00:07.0: version 3.5
>Pin 2-21 already programmed
>sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 21
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 21
>usb 2-6: uevent
>usb 2-6: usb_probe_device
>usb 2-6: configuration #1 chosen from 1 choice
>usb 2-6: adding 2-6:1.0 (config #1, interface 0)
>usb 2-6:1.0: uevent
>usbhid 2-6:1.0: usb_probe_interface
>usbhid 2-6:1.0: usb_probe_interface - got id
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Pin 2-20 already programmed
>sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 20
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 20
>drivers/usb/core/file.c: looking for a minor, starting at 96
>hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 ] on usb-0000:00:02.0-6
>drivers/usb/core/inode.c: creating file '003'
>usb 2-6: New USB device found, idVendor=051d, idProduct=0002
>usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 2-6: Product: Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 
>usb 2-6: Manufacturer: American Power Conversion
>usb 2-6: SerialNumber: JB0448021660  
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [6] = 0x00010101 CSC PPS CCS
>hub 2-0:1.0: port 7, status 0101, change 0001, 12 Mb/s
>hub 2-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x101
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [6] = 0x00100103 PRSC PPS PES CCS
>usb 2-7: new full speed USB device using ohci_hcd and address 4
>ata3: SATA link down (SStatus 0 SControl 300)
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [6] = 0x00100103 PRSC PPS PES CCS
>usb 2-7: ep0 maxpacket = 8
>usb 2-7: default language 0x0409
>usb 2-7: uevent
>usb 2-7: usb_probe_device
>usb 2-7: configuration #1 chosen from 1 choice
>usb 2-7: adding 2-7:1.0 (config #1, interface 0)
>usb 2-7:1.0: uevent
>hub 2-7:1.0: usb_probe_interface
>hub 2-7:1.0: usb_probe_interface - got id
>hub 2-7:1.0: USB hub found
>hub 2-7:1.0: 3 ports detected
>hub 2-7:1.0: compound device; port removable status: RFF
>hub 2-7:1.0: ganged power switching
>hub 2-7:1.0: global over-current protection
>hub 2-7:1.0: power on to power good time: 100ms
>hub 2-7:1.0: hub controller current requirement: 100mA
>hub 2-7:1.0: 100mA bus power budget for each child
>hub 2-7:1.0: no over-current condition exists
>hub 2-7:1.0: enabling power on all ports
>drivers/usb/core/inode.c: creating file '004'
>usb 2-7: New USB device found, idVendor=046d, idProduct=0b07
>usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-7: Product: Logitech BT Mini-Receiver
>usb 2-7: Manufacturer: Logitech
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00010301 CSC LSDA PPS CCS
>hub 2-0:1.0: port 10, status 0301, change 0001, 1.5 Mb/s
>hub 2-0:1.0: debounce: port 10: total 100ms stable 100ms status 0x301
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
>ata4.00: configured for UDMA/100
>scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203N  SB01 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg2 type 5
>modprobe used greatest stack depth: 1760 bytes left
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-10: new low speed USB device using ohci_hcd and address 5
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [9] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-10: uevent
>usb 2-10: usb_probe_device
>usb 2-10: configuration #1 chosen from 1 choice
>usb 2-10: adding 2-10:1.0 (config #1, interface 0)
>usb 2-10:1.0: uevent
>drivers/usb/core/inode.c: creating file '005'
>usb 2-10: New USB device found, idVendor=0aa8, idProduct=8001
>usb 2-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0400
>hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0400
>hub 2-5:1.0: state 7 ports 4 chg 0000 evt 0012
>hub 2-5:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>hub 2-5:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>usb 2-5.1: new low speed USB device using ohci_hcd and address 6
>usb 2-5.1: skipped 1 descriptor after interface
>usb 2-5.1: skipped 1 descriptor after interface
>usb 2-5.1: skipped 1 descriptor after interface
>usb 2-5.1: default language 0x0409
>usb 2-5.1: uevent
>usb 2-5.1: usb_probe_device
>usb 2-5.1: configuration #1 chosen from 1 choice
>usb 2-5.1: adding 2-5.1:1.0 (config #1, interface 0)
>usb 2-5.1:1.0: uevent
>usbhid 2-5.1:1.0: usb_probe_interface
>usbhid 2-5.1:1.0: usb_probe_interface - got id
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.0/input/input4
>input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>usb 2-5.1: adding 2-5.1:1.1 (config #1, interface 1)
>usb 2-5.1:1.1: uevent
>usbhid 2-5.1:1.1: usb_probe_interface
>usbhid 2-5.1:1.1: usb_probe_interface - got id
>ohci_hcd 0000:00:02.0: urb ffff88007c102948 path 5.1 ep0in 5ec20000 cc 5 --> status -62
>usbhid: ctrl urb status -62 received
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.1/input/input5
>drivers/usb/core/file.c: looking for a minor, starting at 96
>input,hiddev97,hidraw2: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>usb 2-5.1: adding 2-5.1:1.2 (config #1, interface 2)
>usb 2-5.1:1.2: uevent
>usbhid 2-5.1:1.2: usb_probe_interface
>usbhid 2-5.1:1.2: usb_probe_interface - got id
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.2/input/input6
>input,hidraw3: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>drivers/usb/core/inode.c: creating file '006'
>usb 2-5.1: New USB device found, idVendor=06a3, idProduct=8000
>usb 2-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5.1: Product: USB Gaming Keyboard Pro
>usb 2-5.1: Manufacturer: Chicony
>hub 2-5:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
>hub 2-5:1.0: debounce: port 4: total 100ms stable 100ms status 0x301
>usb 2-5.4: new low speed USB device using ohci_hcd and address 7
>usb 2-5.4: skipped 1 descriptor after interface
>usb 2-5.4: default language 0x0409
>usb 2-5.4: uevent
>usb 2-5.4: usb_probe_device
>usb 2-5.4: configuration #1 chosen from 1 choice
>usb 2-5.4: adding 2-5.4:1.0 (config #1, interface 0)
>usb 2-5.4:1.0: uevent
>usbhid 2-5.4:1.0: usb_probe_interface
>usbhid 2-5.4:1.0: usb_probe_interface - got id
>input: Kensington      Kensington Expert Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.4/2-5.4:1.0/input/input7
>input,hidraw4: USB HID v1.10 Mouse [Kensington      Kensington Expert Mouse] on usb-0000:00:02.0-5.4
>drivers/usb/core/inode.c: creating file '007'
>usb 2-5.4: New USB device found, idVendor=047d, idProduct=1020
>usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5.4: Product: Kensington Expert Mouse
>usb 2-5.4: Manufacturer: Kensington     
>hub 2-7:1.0: state 7 ports 3 chg 0000 evt 000c
>hub 2-7:1.0: port 2, status 0101, change 0001, 12 Mb/s
>hub 2-7:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>usb 2-7.2: new full speed USB device using ohci_hcd and address 8
>usb 2-7.2: ep0 maxpacket = 8
>usb 2-7.2: skipped 1 descriptor after interface
>usb 2-7.2: default language 0x0409
>usb 2-7.2: uevent
>usb 2-7.2: usb_probe_device
>usb 2-7.2: configuration #1 chosen from 1 choice
>usb 2-7.2: adding 2-7.2:1.0 (config #1, interface 0)
>usb 2-7.2:1.0: uevent
>usbhid 2-7.2:1.0: usb_probe_interface
>usbhid 2-7.2:1.0: usb_probe_interface - got id
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7.2/2-7.2:1.0/input/input8
>input,hidraw5: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-7.2
>drivers/usb/core/inode.c: creating file '008'
>usb 2-7.2: New USB device found, idVendor=046d, idProduct=c71e
>usb 2-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-7.2: Product: Logitech BT Mini-Receiver
>usb 2-7.2: Manufacturer: Logitech
>usb 2-7.2: SerialNumber: 000761AEE883
>hub 2-7:1.0: 302mA power budget left
>hub 2-7:1.0: port 3, status 0101, change 0001, 12 Mb/s
>hub 2-7:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
>usb 2-7.3: new full speed USB device using ohci_hcd and address 9
>usb 2-7.3: ep0 maxpacket = 8
>usb 2-7.3: skipped 1 descriptor after interface
>usb 2-7.3: default language 0x0409
>usb 2-7.3: uevent
>usb 2-7.3: usb_probe_device
>usb 2-7.3: configuration #1 chosen from 1 choice
>usb 2-7.3: adding 2-7.3:1.0 (config #1, interface 0)
>usb 2-7.3:1.0: uevent
>usbhid 2-7.3:1.0: usb_probe_interface
>usbhid 2-7.3:1.0: usb_probe_interface - got id
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7.3/2-7.3:1.0/input/input9
>drivers/usb/core/file.c: looking for a minor, starting at 96
>input,hiddev98,hidraw6: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-7.3
>drivers/usb/core/inode.c: creating file '009'
>usb 2-7.3: New USB device found, idVendor=046d, idProduct=c71f
>usb 2-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-7.3: Product: Logitech BT Mini-Receiver
>usb 2-7.3: Manufacturer: Logitech
>usb 2-7.3: SerialNumber: 000761AEE883
>hub 2-7:1.0: 204mA power budget left
>hub 2-5:1.0: state 7 ports 4 chg 0000 evt 0010
>hub 2-7:1.0: state 7 ports 3 chg 0000 evt 0008
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-10: uevent
>usb 2-10:1.0: uevent
>usb 2-5: uevent
>usb 2-5.1: uevent
>usb 2-5.1:1.0: uevent
>usb 2-5.1:1.1: uevent
>usb 2-5.1:1.2: uevent
>usb 2-5.4: uevent
>usb 2-5.4:1.0: uevent
>usb 2-5:1.0: uevent
>usb 2-6: uevent
>usb 2-6:1.0: uevent
>usb 2-7: uevent
>usb 2-7.2: uevent
>usb 2-7.2:1.0: uevent
>usb 2-7.3: uevent
>usb 2-7.3:1.0: uevent
>usb 2-7:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-1: uevent
>usb 1-1:1.0: uevent
>usb 1-1:1.1: uevent
>usb 1-1:1.2: uevent
>usb 1-1:1.3: uevent
>usb 1-3: uevent
>usb 1-3:1.0: uevent
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>lirc_dev: IR Remote Control driver registered, major 61 
>lirc_imon: Driver for Soundgraph iMON MultiMedia IR/VFD, v0.3
>lirc_imon: Venky Raju <dev@venky.ws>
>lirc_imon 2-10:1.0: usb_probe_interface
>lirc_imon 2-10:1.0: usb_probe_interface - got id
>lirc_imon: imon_probe: found IMON device
>lirc_dev: lirc_register_plugin: sample_rate: 0
>lirc_imon: imon_probe: Registered iMON plugin(minor:0)
>lirc_imon: imon_probe: iMON device on usb<2:5> initialized
>usbcore: registered new interface driver lirc_imon
>pata_amd 0000:00:06.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
>Initializing USB Mass Storage driver...
>usb-storage 1-3:1.0: usb_probe_interface
>usb-storage 1-3:1.0: usb_probe_interface - got id
>Linux video capture interface: v2.00
>scsi6 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>uvcvideo 1-1:1.0: usb_probe_interface
>uvcvideo 1-1:1.0: usb_probe_interface - got id
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c9)
>usb 1-1: link qh16-0001/ffff88007c67e1e0 start 15 [1/0 us]
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>Pin 2-23 already programmed
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>input: PC Speaker as /devices/platform/pcspkr/input/input10
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 17, addr 00:e0:4c:e9:7c:ac
>forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>parport0: Printer, Brother HL-2040 series
>firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.0
>snd-usb-audio 1-1:1.2: usb_probe_interface
>snd-usb-audio 1-1:1.2: usb_probe_interface - got id
>ALSA sound/usb/usbaudio.c:2812: 2:3:3: add audio endpoint 0x86
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>Pin 2-22 already programmed
>Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>firewire_core: created device fw0: GUID 003067000006e655, S400
>ppdev: user-space parallel port driver
>intel8x0_measure_ac97_clock: measured 50544 usecs
>intel8x0: clocking to 46806
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda7, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 8008360k swap on /dev/sdb1.  Priority:-1 extents:1 across:8008360k

Actions: View

Attachments on bug 459523: 315057 | 315058 | 315159