Attachment 315159 Details for Bug 459523 – transcript of boot from serial console

transcript of boot from serial console

f10-boot.txt (text/plain), 33.30 KB, created by Tom Horsley on 2008-08-27 23:19:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Horsley

Created: 2008-08-27 23:19:39 UTC

Size: 33.30 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.280.rc4.git4.fc10.x86_64 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.3.1 20080825 (Red Hat 4.3.1-8) (GCC) ) #1 SMP Tue Aug 26 04:42:43 EDT 2008
>Command line: ro root=LABEL=F10ROOT64 console=ttyS0,38400 audit=0 selinux=0 8250.nr_uarts=9
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>last_map_addr: 7fff0000 end: 7fff0000
>RAMDISK: 37d21000 - 37fef6d2
>DMI 2.2 present.
>ACPI: RSDP 000F7A70, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF3180, 5EE0 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SSDT 7FFF9180, 01CA (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 7FFF93C0, 00A0 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 7FFF94C0, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FFF90C0, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: PXM 0 -> APIC 1 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>SRAT: Node 0 PXM 0 100000-80000000
>Bootmem setup node 0 0000000000000000-000000007fff0000
>  NODE_DATA [000000000000b080 - 000000000002307f]
>  bootmap [0000000000024000 -  0000000000033fff] pages 10
>(7 early reservations) ==> bootmem [0000000000 - 007fff0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0001522008]    TEXT DATA BSS ==> [0000200000 - 0001522008]
>  #3 [0037d21000 - 0037fef6d2]          RAMDISK ==> [0037d21000 - 0037fef6d2]
>  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>  #6 [000000a000 - 000000b080]       MEMNODEMAP ==> [000000a000 - 000000b080]
>found SMP MP-table at [ffff8800000f38f0] 000f38f0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fff0
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PERCPU: Allocating 1647392 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511783
>Policy zone: DMA32
>Kernel command line: ro root=LABEL=F10ROOT64 console=ttyS0,38400 audit=0 selinux=0 8250.nr_uarts=9
>audit: disabled (after initialization)
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Detected 2211.327 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 4095 kB
> per task-struct memory footprint: 2688 bytes
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 872000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 2021440k/2097088k available (3246k kernel code, 75260k reserved, 1838k data, 2776k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.65 BogoMIPS (lpj=2211327)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Using local APIC timer interrupts.
>Detected 12.564 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4422.62 BogoMIPS (lpj=2211311)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (8845.27 BogoMIPS).
>khelper used greatest stack depth: 5032 bytes left
>net_namespace: 1680 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:29:31  Date: 08/27/08
>NET: Registered protocol family 16
>No dock devices found.
>TOM: 0000000080000000 aka 2048M
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:01:09.0: PME# supported from D0 D2 D3hot
>pci 0000:01:09.0: PME# disabled
>pci 0000:01:09.1: PME# supported from D0 D2 D3hot
>pci 0000:01:09.1: PME# disabled
>pci 0000:01:0a.0: PME# supported from D2 D3hot D3cold
>pci 0000:01:0a.0: PME# disabled
>pci 0000:00:09.0: transparent bridge
>PCI: bridge 0000:00:09.0 io port: [d000, dfff]
>PCI: bridge 0000:00:09.0 32bit mmio: [fe900000, fe9fffff]
>PCI: bridge 0000:00:09.0 32bit mmio pref: [fea00000, feafffff]
>PCI: bridge 0000:00:0b.0 io port: [c000, cfff]
>PCI: bridge 0000:00:0b.0 32bit mmio: [fe800000, fe8fffff]
>PCI: bridge 0000:00:0b.0 64bit mmio pref: [fe700000, fe7fffff]
>PCI: bridge 0000:00:0c.0 io port: [b000, bfff]
>PCI: bridge 0000:00:0c.0 32bit mmio: [fe600000, fe6fffff]
>PCI: bridge 0000:00:0c.0 64bit mmio pref: [fe500000, fe5fffff]
>PCI: bridge 0000:00:0d.0 io port: [a000, afff]
>PCI: bridge 0000:00:0d.0 32bit mmio: [fe400000, fe4fffff]
>PCI: bridge 0000:00:0d.0 64bit mmio pref: [fe300000, fe3fffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0e.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:0e.0 io port: [9000, 9fff]
>PCI: bridge 0000:00:0e.0 32bit mmio: [fc000000, fdffffff]
>PCI: bridge 0000:00:0e.0 64bit mmio pref: [b0000000, cfffffff]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pci 0000:05:00.0: BAR 3: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x4080-0x40ff has been reserved
>system 00:01: ioport range 0x4400-0x447f has been reserved
>system 00:01: ioport range 0x4480-0x44ff has been reserved
>system 00:01: ioport range 0x4800-0x487f has been reserved
>system 00:01: ioport range 0x4880-0x48ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0b: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:0b: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0b: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0b: iomem range 0x0-0x9ffff could not be reserved
>system 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved
>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:09.0:   IO window: 0xd000-0xdfff
>pci 0000:00:09.0:   MEM window: 0xfe900000-0xfe9fffff
>pci 0000:00:09.0:   PREFETCH window: 0x000000fea00000-0x000000feafffff
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: 0xc000-0xcfff
>pci 0000:00:0b.0:   MEM window: 0xfe800000-0xfe8fffff
>pci 0000:00:0b.0:   PREFETCH window: 0x000000fe700000-0x000000fe7fffff
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: 0xb000-0xbfff
>pci 0000:00:0c.0:   MEM window: 0xfe600000-0xfe6fffff
>pci 0000:00:0c.0:   PREFETCH window: 0x000000fe500000-0x000000fe5fffff
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: 0xa000-0xafff
>pci 0000:00:0d.0:   MEM window: 0xfe400000-0xfe4fffff
>pci 0000:00:0d.0:   PREFETCH window: 0x000000fe300000-0x000000fe3fffff
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: 0x9000-0x9fff
>pci 0000:00:0e.0:   MEM window: 0xfc000000-0xfdffffff
>pci 0000:00:0e.0:   PREFETCH window: 0x000000b0000000-0x000000cfffffff
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [d000, dfff]
>bus: 01 index 1 mmio: [fe900000, fe9fffff]
>bus: 01 index 2 mmio: [fea00000, feafffff]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>bus: 02 index 0 io port: [c000, cfff]
>bus: 02 index 1 mmio: [fe800000, fe8fffff]
>bus: 02 index 2 mmio: [fe700000, fe7fffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [b000, bfff]
>bus: 03 index 1 mmio: [fe600000, fe6fffff]
>bus: 03 index 2 mmio: [fe500000, fe5fffff]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [a000, afff]
>bus: 04 index 1 mmio: [fe400000, fe4fffff]
>bus: 04 index 2 mmio: [fe300000, fe3fffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 io port: [9000, 9fff]
>bus: 05 index 1 mmio: [fc000000, fdffffff]
>bus: 05 index 2 mmio: [b0000000, cfffffff]
>bus: 05 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory ffff880037d21000..ffff880037ff0000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219876171.783:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3948
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pcieport-driver 0000:00:0b.0: found MSI capability
>pcieport-driver 0000:00:0c.0: found MSI capability
>pcieport-driver 0000:00:0d.0: found MSI capability
>pcieport-driver 0000:00:0e.0: found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SLPB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN] (on)
>processor ACPI0007:00: registered as cooling_device1
>processor ACPI0007:01: registered as cooling_device2
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver9 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>serial 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS4: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS4 at I/O 0xdf00 (irq = 17) is a 16C950/954
>ttyS5: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS5 at I/O 0xdf08 (irq = 17) is a 16C950/954
>ttyS6: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS6 at I/O 0xdf10 (irq = 17) is a 16C950/954
>ttyS7: detected caps 00000700 should be 00000100
>0000:01:09.0: ttyS7 at I/O 0xdf18 (irq = 17) is a 16C950/954
>serial 0000:01:09.1: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>ttyS8: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS8 at I/O 0xdd00 (irq = 17) is a 16C950/954
>ttyS1: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS1 at I/O 0xdd08 (irq = 17) is a 16C950/954
>ttyS2: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS2 at I/O 0xdd10 (irq = 17) is a 16C950/954
>ttyS3: detected caps 00000700 should be 00000100
>0000:01:09.1: ttyS3 at I/O 0xdd18 (irq = 17) is a 16C950/954
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfebfe000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.280.rc4.git4.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.280.rc4.git4.fc10.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>USB Universal Host Controller Interface driver v3.0
>PNP: No PS/2 controller found. Probing ports directly.
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=046d, idProduct=08c9
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
>usb 1-1: SerialNumber: E0E377C3
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usb 2-5: new full speed USB device using ohci_hcd and address 2
>usb 2-5: configuration #1 chosen from 1 choice
>hub 2-5:1.0: USB hub found
>hub 2-5:1.0: 4 ports detected
>usb 2-5: New USB device found, idVendor=0557, idProduct=7000
>usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-6: new low speed USB device using ohci_hcd and address 3
>usb 2-6: configuration #1 chosen from 1 choice
>usb 2-6: New USB device found, idVendor=051d, idProduct=0002
>usb 2-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 2-6: Product: Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 
>usb 2-6: Manufacturer: American Power Conversion
>usb 2-6: SerialNumber: JB0448021660  
>usb 2-7: new full speed USB device using ohci_hcd and address 4
>usb 2-7: configuration #1 chosen from 1 choice
>hub 2-7:1.0: USB hub found
>hub 2-7:1.0: 3 ports detected
>usb 2-7: New USB device found, idVendor=046d, idProduct=0b07
>usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-7: Product: Logitech BT Mini-Receiver
>usb 2-7: Manufacturer: Logitech
>usb 2-10: new low speed USB device using ohci_hcd and address 5
>usb 2-10: configuration #1 chosen from 1 choice
>usb 2-10: New USB device found, idVendor=0aa8, idProduct=8001
>usb 2-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-5.1: new low speed USB device using ohci_hcd and address 6
>usb 2-5.1: configuration #1 chosen from 1 choice
>usb 2-5.1: New USB device found, idVendor=06a3, idProduct=8000
>usb 2-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5.1: Product: USB Gaming Keyboard Pro
>usb 2-5.1: Manufacturer: Chicony
>usb 2-7.2: new full speed USB device using ohci_hcd and address 7
>usb 2-7.2: configuration #1 chosen from 1 choice
>usb 2-7.2: New USB device found, idVendor=046d, idProduct=c71e
>usb 2-7.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-7.2: Product: Logitech BT Mini-Receiver
>usb 2-7.2: Manufacturer: Logitech
>usb 2-7.2: SerialNumber: 000761AEE883
>usb 2-7.3: new full speed USB device using ohci_hcd and address 8
>usb 2-7.3: configuration #1 chosen from 1 choice
>usb 2-7.3: New USB device found, idVendor=046d, idProduct=c71f
>usb 2-7.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-7.3: Product: Logitech BT Mini-Receiver
>usb 2-7.3: Manufacturer: Logitech
>usb 2-7.3: SerialNumber: 000761AEE883
>usbcore: registered new interface driver hiddev
>hiddev96hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g8 .D USB FW:g8 ] on usb-0000:00:02.0-6
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.0/input/input4
>input,hidraw1: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>usbhid: ctrl urb status -62 received
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.1/input/input5
>input,hiddev97,hidraw2: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>input: Chicony USB Gaming Keyboard Pro as /devices/pci0000:00/0000:00:02.0/usb2/2-5/2-5.1/2-5.1:1.2/input/input6
>input,hidraw3: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:02.0-5.1
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7.2/2-7.2:1.0/input/input7
>input,hidraw4: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-7.2
>input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7.3/2-7.3:1.0/input/input8
>input,hiddev98,hidraw5: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-7.3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 4:303:503
>debug: unmapping init memory ffffffff8176d000..ffffffff81a23000
>Write protecting the kernel read-only data: 1448k
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>plymouthd used greatest stack depth: 4736 bytes left
>modprobe used greatest stack depth: 4208 bytes left
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>pata_acpi 0000:00:07.0: PCI INT A disabled
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>pata_acpi 0000:00:08.0: PCI INT A disabled
>sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 21
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 21
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: WDC WD5000AACS-00ZUB0, 01.01B01, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AACS-0 01.0 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 20
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 20
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
>ata4.00: configured for UDMA/100
>scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203N  SB01 PQ: 0 ANSI: 5
>scsi 3:0:0:0: Attached scsi generic sg2 type 5
>modprobe used greatest stack depth: 2616 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
>IP: [<ffffffff8116bb29>] vsnprintf+0x571/0x5bd
>PGD 7cd1c067 PUD 7c516067 PMD 0 
>Oops: 0000 [1] SMP DEBUG_PAGEALLOC
>CPU 1 
>Modules linked in: lirc_imon(+) lirc_dev i2c_nforce2 i2c_core parport_pc parport ata_generic sata_nv pata_acpi ext3 jbd mbcache
>Pid: 955, comm: modprobe Not tainted 2.6.27-0.280.rc4.git4.fc10.x86_64 #1
>RIP: 0010:[<ffffffff8116bb29>]  [<ffffffff8116bb29>] vsnprintf+0x571/0x5bd
>RSP: 0018:ffff88007cdbd938  EFLAGS: 00010286
>RAX: ffff88007cc41ffc RBX: ffff88007cdbdae8 RCX: ffff88007cdbdae8
>RDX: 0000000000000000 RSI: 0000000000000014 RDI: ffff88007cc41fe8
>RBP: ffff88007cdbda88 R08: ffffffff816a5040 R09: 000000000000005a
>R10: 00000000000001ab R11: ffffffffa00fbba0 R12: ffff88007cc41fe8
>R13: 0000000000000000 R14: 0000000003d00000 R15: ffff88007c42e3e8
>FS:  00007fc0baf086f0(0000) GS:ffff88007f8217d0(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000000 CR3: 000000007c0f4000 CR4: 00000000000006e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process modprobe (pid: 955, threadinfo ffff88007cdbc000, task ffff88007cc2c5a0)
>Stack:  ffffffff81bed968 ffff88007cdbd958 ffffffff810c898c 0000000000000014
> ffff88007cc41fe8 ffff88007cc41ffc ffffe20002ec9800 ffffffff816a5040
> ffff88007cc41df8 ffffe20002ec9800 0000000000000000 ffffffff811f36dc
>Call Trace:
> [<ffffffff810c898c>] ? compound_order+0x1a/0x2b
> [<ffffffff811f36dc>] ? kzalloc+0x14/0x16
> [<ffffffff810c9f28>] ? check_object+0x17b/0x1b4
> [<ffffffff810cbb0c>] ? __slab_alloc+0xbd/0x3ee
> [<ffffffff811f36dc>] ? kzalloc+0x14/0x16
> [<ffffffff81067902>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff810678d1>] ? trace_hardirqs_on_caller+0x10f/0x133
> [<ffffffff81067902>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff811f4775>] device_create_vargs+0x9a/0xd0
> [<ffffffff811f47fb>] device_create+0x50/0x55
> [<ffffffff81017d4a>] ? sched_clock+0x9/0xc
> [<ffffffff81065e45>] ? lock_release_holdtime+0x2c/0x111
> [<ffffffff81067902>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff810678d1>] ? trace_hardirqs_on_caller+0x10f/0x133
> [<ffffffff81067902>] ? trace_hardirqs_on+0xd/0xf
> [<ffffffff8105e2ca>] ? down+0x38/0x3e
> [<ffffffffa00fa212>] lirc_register_plugin+0x39b/0x496 [lirc_dev]
> [<ffffffff81065e45>] ? lock_release_holdtime+0x2c/0x111
> [<ffffffffa010efd3>] imon_probe+0x4c7/0x6b9 [lirc_imon]
> [<ffffffff8123999e>] usb_probe_interface+0x161/0x19e
> [<ffffffff811f646e>] driver_probe_device+0xc5/0x173
> [<ffffffff811f6570>] __driver_attach+0x54/0x7e
> [<ffffffff811f651c>] ? __driver_attach+0x0/0x7e
> [<ffffffff811f5c9a>] bus_for_each_dev+0x57/0x91
> [<ffffffff811f62a7>] driver_attach+0x21/0x23
> [<ffffffff811f5570>] bus_add_driver+0xbd/0x20a
> [<ffffffff811f678a>] driver_register+0xb0/0x130
> [<ffffffff81239c3b>] usb_register_driver+0xaa/0x10e
> [<ffffffffa0123000>] ? imon_init+0x0/0x65 [lirc_imon]
> [<ffffffffa012303f>] imon_init+0x3f/0x65 [lirc_imon]
> [<ffffffff8100a05c>] do_one_initcall+0x4c/0x156
> [<ffffffff810678d1>] ? trace_hardirqs_on_caller+0x10f/0x133
> [<ffffffff81072194>] sys_init_module+0xb0/0x1c1
> [<ffffffff8101138a>] system_call_fastpath+0x16/0x1b
>
>
>Code: 08 41 f6 c6 02 8b 12 74 03 48 63 d2 48 8b b5 d8 fe ff ff 45 89 c1 4c 89 e7 45 89 f8 44 89 34 24 e8 33 f1 ff ff 49 89 c4 49 ff c5 <41> 8a 45 00 84 c0 0f 85 1b fb ff ff 48 83 bd c8 fe ff ff 00 74 
>RIP  [<ffffffff8116bb29>] vsnprintf+0x571/0x5bd
> RSP <ffff88007cdbd938>
>CR2: 0000000000000000
>---[ end trace 4925d15420b517f6 ]---
>pata_amd 0000:00:06.0: version 0.3.10
>pata_amd 0000:00:06.0: setting latency timer to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
>Linux video capture interface: v2.00
>uvcvideo 1-1:1.0: usb_probe_interface
>uvcvideo 1-1:1.0: usb_probe_interface - got id
>input: PC Speaker as /devices/platform/pcspkr/input/input9
>uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c9)
>Driver 'sr' needs updating - please use bus_type methods
>input: UVC Camera (046d:08c9) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/1-1:1.0/input/input10
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>usb 1-1: link qh16-0001/ffff88007cb77140 start 15 [1/0 us]
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>Floppy drive(s): fd0 is 1.44MACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
>forcedeth 0000:00:0a.0: setting latency timer to 64
>
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>FDC 0 is a post-1991 82077
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x3f1 @ 17, addr 00:e0:4c:e9:7c:ac
>forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
>ppdev: user-space parallel port driver
>firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.0
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
>Intel ICH 0000:00:04.0: setting latency timer to 64
>firewire_core: created device fw0: GUID 003067000006e655, S400
>snd-usb-audio 1-1:1.2: usb_probe_interface
>snd-usb-audio 1-1:1.2: usb_probe_interface - got id
>ALSA sound/usb/usbaudio.c:2812: 2:3:3: add audio endpoint 0x86
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:988: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
>intel8x0_measure_ac97_clock: measured 50847 usecs
>intel8x0: clocking to 46786

Actions: View

Attachments on bug 459523: 315057 | 315058 | 315159