Attachment 315287 Details for Bug 460581 – X log

X log

Xorg.1.log (text/plain), 15.18 KB, created by Jeremy Katz on 2008-08-28 19:32:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeremy Katz

Created: 2008-08-28 19:32:37 UTC

Size: 15.18 KB

patch

obsolete

>
>X.Org X Server 1.4.99.906 (1.5.0 RC 6)
>Release Date: 
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.18-92.1.6.el5 i686 
>Current Operating System: Linux localhost.localdomain 2.6.26-20080828.fc9.katzj #1 PREEMPT Thu Aug 28 11:14:44 EDT 2008 i586
>Build Date: 05 August 2008  01:17:52AM
>Build ID: xorg-x11-server 1.4.99.906-5.fc10 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.1.log", Time: Thu Aug 28 18:01:43 2008
>(EE) Unable to locate/open config file
>(II) Loader magic: 0x81ee400
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 4.1
>	X.Org XInput driver : 2.1
>	X.Org Server Extension : 1.1
>	X.Org Font Renderer : 0.6
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0@0:1:1) Advanced Micro Devices [AMD] Geode LX Video rev 0, Mem @ 0xfd000000/0, 0xfe000000/0, 0xfe004000/0, 0xfe008000/0, 0xfe00c000/0
>(--) PCI: (0@0:12:2) Marvell Technology Group Ltd. unknown chipset (0x4102) rev 16, Mem @ 0xfe028000/0
>(==) Matched geode for the autoconfigured driver
>New driver is "geode"
>(==) Using default built-in configuration (30 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default geode Device 0"
>		Driver	"geode"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default geode Screen 0"
>		Device	"Builtin Default geode Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default geode Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default geode Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default geode Device 0"
>(==) No monitor specified for screen "Builtin Default geode Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
>(II) No APM support in BIOS or kernel
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension SELinux
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "freetype"
>
>(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.4.99.906, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.6
>(II) Loading font FreeType
>(II) LoadModule: "dri"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "geode"
>
>(II) Loading /usr/lib/xorg/modules/drivers//geode_drv.so
>(II) Module geode: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 2.10.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.1
>(II) LoadModule: "fbdev"
>
>(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
>(II) Module fbdev: vendor="X.Org Foundation"
>	compiled for 1.4.99.2, module version = 0.3.1
>	ABI class: X.Org Video Driver, version 4.0
>(II) LoadModule: "vesa"
>
>(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.4.99.905, module version = 1.3.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.1
>(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
>(II) FBDEV: driver for framebuffer: fbdev
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:01:1
>AmdPciProbe: Probing for supported devices!
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) GEODE(0): AmdPciProbe: CPUDetected 32!
>(WW) Falling back to old probe method for fbdev
>(II) Loading sub module "fbdevhw"
>(II) LoadModule: "fbdevhw"
>
>(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
>(II) Module fbdevhw: vendor="X.Org Foundation"
>	compiled for 1.4.99.906, module version = 0.0.2
>	ABI class: X.Org Video Driver, version 4.1
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(WW) System lacks support for changing MTRRs
>(II) GEODE(0): Creating default Display subsection in Screen section
>	"Builtin Default geode Screen 0" for depth/fbbpp 16/16
>(==) GEODE(0): Depth 16, (==) framebuffer bpp 16
>(==) GEODE(0): RGB weight 565
>(==) GEODE(0): Default visual is TrueColor
>(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) GEODE(0): DCON detected.
>(II) GEODE(0): LX output options:
>(II) GEODE(0):  CRT: NO
>(II) GEODE(0):  PANEL: YES
>(II) GEODE(0):  DCON: YES
>(II) GEODE(0):  VGA: NO
>(II) GEODE(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
>(II) GEODE(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
>(WW) GEODE(0): Unable to estimate virtual size
>(II) GEODE(0): Clock range:  25.18 to 229.50 MHz
>(II) GEODE(0): Not using default mode "640x350" (unknown reason)
>(II) GEODE(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "640x400" (unknown reason)
>(II) GEODE(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "720x400" (unknown reason)
>(II) GEODE(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "640x480" (unknown reason)
>(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "640x480" (unknown reason)
>(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "640x480" (unknown reason)
>(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "640x480" (unknown reason)
>(II) GEODE(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "800x600" (unknown reason)
>(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "800x600" (unknown reason)
>(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "800x600" (unknown reason)
>(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "800x600" (unknown reason)
>(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "800x600" (unknown reason)
>(II) GEODE(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
>(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
>(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
>(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
>(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
>(II) GEODE(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1152x864" (no mode of this name)
>(II) GEODE(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1280x960" (no mode of this name)
>(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1280x960" (no mode of this name)
>(II) GEODE(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1280x1024" (no mode of this name)
>(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1280x1024" (no mode of this name)
>(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1280x1024" (no mode of this name)
>(II) GEODE(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1600x1200" (no mode of this name)
>(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1600x1200" (no mode of this name)
>(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1600x1200" (no mode of this name)
>(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1600x1200" (no mode of this name)
>(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1600x1200" (no mode of this name)
>(II) GEODE(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1792x1344" (no mode of this name)
>(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1856x1392" (no mode of this name)
>(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "832x624" (unknown reason)
>(II) GEODE(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1400x1050" (no mode of this name)
>(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1400x1050" (no mode of this name)
>(II) GEODE(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
>(II) GEODE(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(WW) GEODE(0): Mode pool is empty
>(EE) GEODE(0): No valid modes were found
>(II) UnloadModule: "geode"
>(EE) Screen(s) found, but none have a usable configuration.
>
>Fatal server error:
>no screens found

Actions: View

Attachments on bug 460581: 315287