Attachment 315439 Details for Bug 460760 – dmesg

dmesg

2.6.27-0.290.rc5.fc10.i686.txt (text/plain), 54.13 KB, created by sangu on 2008-08-31 08:43:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: sangu

Created: 2008-08-31 08:43:48 UTC

Size: 54.13 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.290.rc5.fc10.i686 (mockbuild@x86-2.fedora.phx.redhat.com) (gcc version 4.3.1 20080825 (Red Hat 4.3.1-8) (GCC) ) #1 SMP Thu Aug 28 21:44:53 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000006fee0000 (usable)
> BIOS-e820: 000000006fee0000 - 000000006fee3000 (ACPI NVS)
> BIOS-e820: 000000006fee3000 - 000000006fef0000 (ACPI data)
> BIOS-e820: 000000006fef0000 - 000000006ff00000 (reserved)
> BIOS-e820: 0000000070000000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>last_pfn = 0x6fee0 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37d66000 - 37fef3ad
>DMI 2.5 present.
>ACPI: RSDP 000F7280, 0024 (r2 Nvidia)
>ACPI: XSDT 6FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 6FEED400, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609]
>ACPI: DSDT 6FEE3280, A113 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS 6FEE0A80, 0040
>ACPI: SSDT 6FEED640, 0544 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET 6FEEDC00, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 6FEEDC80, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 6FEED540, 008E (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>894MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000e7f59c]    TEXT DATA BSS ==> [0000400000 - 0000e7f59c]
>  #4 [0037d66000 - 0037fef3ad]          RAMDISK ==> [0037d66000 - 0037fef3ad]
>  #5 [0000e80000 - 0000e96000]    INIT_PG_TABLE ==> [0000e80000 - 0000e96000]
>  #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>found SMP MP-table at [c00f56f0] 000f56f0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0006fee0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0006fee0
>On node 0 totalpages: 458367
>free_area_init_node: node 0, pgdat c07c3100, node_mem_map c1001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 225955 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 1221020 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 452098
>Kernel command line: ro root=LABEL=/
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0990000 soft=c0970000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>TSC calibrated against PM_TIMER
>Detected 2500.008 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 2463 kB
> per task-struct memory footprint: 1920 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1788324k/1833856k available (2664k kernel code, 44280k reserved, 1386k data, 1488k init, 916352k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07f9000 - 0xc096d000   (1488 kB)
>      .data : 0xc069a1b8 - 0xc07f4d48   (1386 kB)
>      .text : 0xc0400000 - 0xc069a1b8   (2664 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.01 BogoMIPS (lpj=2500008)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(4) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using C1E aware idle routine
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>lockdep: fixing up alternatives.
>CPU 1 irqstacks, hard=c0991000 soft=c0971000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4999.86 BogoMIPS (lpj=2499932)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(4) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>System has C1E enabled
>Switch to broadcast mode on CPU1
>lockdep: fixing up alternatives.
>CPU 2 irqstacks, hard=c0992000 soft=c0972000
>Booting processor 2/2 ip 6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4999.98 BogoMIPS (lpj=2499994)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2(4) -> Core 2
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Switch to broadcast mode on CPU2
>lockdep: fixing up alternatives.
>CPU 3 irqstacks, hard=c0993000 soft=c0973000
>Booting processor 3/3 ip 6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4999.97 BogoMIPS (lpj=2499989)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3(4) -> Core 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
>Brought up 4 CPUs
>Switch to broadcast mode on CPU3
>Total of 4 processors activated (19999.84 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5296 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 0 1 2 3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 1 2 3 0
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 2 3 0 1
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level CPU
>  groups: 3 0 1 2
>Switch to broadcast mode on CPU0
>khelper used greatest stack depth: 2628 bytes left
>net_namespace: 912 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:28:37  Date: 08/31/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:04.0: supports D1
>pci 0000:00:04.0: supports D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:04.1: supports D1
>pci 0000:00:04.1: supports D2
>pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.1: PME# disabled
>pci 0000:00:07.0: PME# supported from D3hot D3cold
>pci 0000:00:07.0: PME# disabled
>pci 0000:00:0a.0: supports D1
>pci 0000:00:0a.0: supports D2
>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.0: PME# disabled
>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.0: PME# disabled
>pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:13.0: PME# disabled
>pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:14.0: PME# disabled
>pci 0000:01:0a.0: supports D1
>pci 0000:01:0a.0: supports D2
>pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:01:0a.0: PME# disabled
>pci 0000:01:0b.0: supports D1
>pci 0000:01:0b.0: supports D2
>pci 0000:01:0b.1: supports D1
>pci 0000:01:0b.1: supports D2
>pci 0000:00:08.0: transparent bridge
>PCI: bridge 0000:00:08.0 io port: [c000, cfff]
>PCI: bridge 0000:00:08.0 32bit mmio: [fde00000, fdefffff]
>PCI: bridge 0000:00:08.0 32bit mmio pref: [fdd00000, fddfffff]
>PCI: bridge 0000:00:0b.0 io port: [b000, bfff]
>PCI: bridge 0000:00:0b.0 32bit mmio: [fb000000, fcffffff]
>PCI: bridge 0000:00:0b.0 64bit mmio pref: [d8000000, e7ffffff]
>PCI: bridge 0000:00:10.0 io port: [a000, afff]
>PCI: bridge 0000:00:10.0 32bit mmio: [fdc00000, fdcfffff]
>PCI: bridge 0000:00:10.0 64bit mmio pref: [fdb00000, fdbfffff]
>PCI: bridge 0000:00:12.0 io port: [9000, 9fff]
>PCI: bridge 0000:00:12.0 32bit mmio: [fda00000, fdafffff]
>PCI: bridge 0000:00:12.0 64bit mmio pref: [fd900000, fd9fffff]
>PCI: bridge 0000:00:13.0 io port: [8000, 8fff]
>PCI: bridge 0000:00:13.0 32bit mmio: [fd800000, fd8fffff]
>PCI: bridge 0000:00:13.0 64bit mmio pref: [fd700000, fd7fffff]
>PCI: bridge 0000:00:14.0 io port: [7000, 7fff]
>PCI: bridge 0000:00:14.0 32bit mmio: [fd600000, fd6fffff]
>PCI: bridge 0000:00:14.0 64bit mmio pref: [fd500000, fd5fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LE0A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE0D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1A] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LE1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE1C] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LE1D] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LE2A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE2D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE3D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE4D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE5D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE6D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7A] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7C] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LE7D] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [AE0A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE0D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1A] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AE1B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE1C] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AE1D] (IRQs 16) *0
>ACPI: PCI Interrupt Link [AE2A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE2D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE3D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE4D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE5D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE6D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7A] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7B] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7C] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AE7D] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved
>system 00:01: iomem range 0x70000000-0x7fffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:08: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:09: iomem range 0xcd200-0xcffff has been reserved
>system 00:09: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:09: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:09: iomem range 0xfc000-0xfffff could not be reserved
>system 00:09: iomem range 0xfeff0000-0xfeff00ff could not be reserved
>system 00:09: iomem range 0x6fee0000-0x6fefffff could not be reserved
>system 00:09: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0x100000-0x6fedffff could not be reserved
>system 00:09: iomem range 0x6fff0000-0x7ffeffff could not be reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:09: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:09: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:09: iomem range 0xfffed000-0xfffeffff could not be reserved
>pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:08.0:   IO window: 0xc000-0xcfff
>pci 0000:00:08.0:   MEM window: 0xfde00000-0xfdefffff
>pci 0000:00:08.0:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: 0xb000-0xbfff
>pci 0000:00:0b.0:   MEM window: 0xfb000000-0xfcffffff
>pci 0000:00:0b.0:   PREFETCH window: 0x000000d8000000-0x000000e7ffffff
>pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:10.0:   IO window: 0xa000-0xafff
>pci 0000:00:10.0:   MEM window: 0xfdc00000-0xfdcfffff
>pci 0000:00:10.0:   PREFETCH window: 0x000000fdb00000-0x000000fdbfffff
>pci 0000:00:12.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:12.0:   IO window: 0x9000-0x9fff
>pci 0000:00:12.0:   MEM window: 0xfda00000-0xfdafffff
>pci 0000:00:12.0:   PREFETCH window: 0x000000fd900000-0x000000fd9fffff
>pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:13.0:   IO window: 0x8000-0x8fff
>pci 0000:00:13.0:   MEM window: 0xfd800000-0xfd8fffff
>pci 0000:00:13.0:   PREFETCH window: 0x000000fd700000-0x000000fd7fffff
>pci 0000:00:14.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:14.0:   IO window: 0x7000-0x7fff
>pci 0000:00:14.0:   MEM window: 0xfd600000-0xfd6fffff
>pci 0000:00:14.0:   PREFETCH window: 0x000000fd500000-0x000000fd5fffff
>pci 0000:00:08.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [AE0A] enabled at IRQ 16
>pci 0000:00:10.0: PCI INT A -> Link[AE0A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:10.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [AE2A] enabled at IRQ 16
>pci 0000:00:12.0: PCI INT A -> Link[AE2A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:12.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [AE3A] enabled at IRQ 16
>pci 0000:00:13.0: PCI INT A -> Link[AE3A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:13.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [AE4A] enabled at IRQ 16
>pci 0000:00:14.0: PCI INT A -> Link[AE4A] -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:14.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [c000, cfff]
>bus: 01 index 1 mmio: [fde00000, fdefffff]
>bus: 01 index 2 mmio: [fdd00000, fddfffff]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>bus: 02 index 0 io port: [b000, bfff]
>bus: 02 index 1 mmio: [fb000000, fcffffff]
>bus: 02 index 2 mmio: [d8000000, e7ffffff]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [a000, afff]
>bus: 03 index 1 mmio: [fdc00000, fdcfffff]
>bus: 03 index 2 mmio: [fdb00000, fdbfffff]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 io port: [9000, 9fff]
>bus: 04 index 1 mmio: [fda00000, fdafffff]
>bus: 04 index 2 mmio: [fd900000, fd9fffff]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 io port: [8000, 8fff]
>bus: 05 index 1 mmio: [fd800000, fd8fffff]
>bus: 05 index 2 mmio: [fd700000, fd7fffff]
>bus: 05 index 3 mmio: [0, 0]
>bus: 06 index 0 io port: [7000, 7fff]
>bus: 06 index 1 mmio: [fd600000, fd6fffff]
>bus: 06 index 2 mmio: [fd500000, fd5fffff]
>bus: 06 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory f7d66000..f7ff0000
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1220167718.165:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1704
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:07.0: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0a.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:12.0: Enabling HT MSI Mapping
>pci 0000:00:13.0: Enabling HT MSI Mapping
>pci 0000:00:14.0: Enabling HT MSI Mapping
>pci 0000:02:00.0: Boot video device
>pcieport-driver 0000:00:10.0: setting latency timer to 64
>pcieport-driver 0000:00:10.0: found MSI capability
>pci_express 0000:00:10.0:pcie00: allocate port service
>pcieport-driver 0000:00:12.0: setting latency timer to 64
>pcieport-driver 0000:00:12.0: found MSI capability
>pci_express 0000:00:12.0:pcie00: allocate port service
>pcieport-driver 0000:00:13.0: setting latency timer to 64
>pcieport-driver 0000:00:13.0: found MSI capability
>pci_express 0000:00:13.0:pcie00: allocate port service
>pcieport-driver 0000:00:14.0: setting latency timer to 64
>pcieport-driver 0000:00:14.0: found MSI capability
>pci_express 0000:00:14.0:pcie00: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN] (on)
>processor ACPI0007:00: registered as cooling_device1
>processor ACPI0007:01: registered as cooling_device2
>processor ACPI0007:02: registered as cooling_device3
>processor ACPI0007:03: registered as cooling_device4
>ACPI: Expecting a [Reference] package element, found type 0
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>hpet_resources: 0xfeff0000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>khelper used greatest stack depth: 2524 bytes left
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 23
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[AUB2] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
>ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 
>ehci_hcd 0000:00:02.1: reset hcc_params a087 caching frame 256/512/1024 park 64 bit addr
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: supports USB remote wakeup
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:02.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 6 chg 0002 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:02.1: port 1 low speed --> companion
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.290.rc5.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>ACPI: PCI Interrupt Link [AU2B] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [AU2B] enabled at IRQ 22
>ehci_hcd 0000:00:04.1: PCI INT B -> Link[AU2B] -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:04.1: setting latency timer to 64
>ehci_hcd 0000:00:04.1: EHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:04.1: reset hcs_params 0x101f86 dbg=1 cc=1 pcc=15 !ppc ports=6
>ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 
>ehci_hcd 0000:00:04.1: reset hcc_params a087 caching frame 256/512/1024 park 64 bit addr
>ehci_hcd 0000:00:04.1: park 0
>ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:04.1: debug port 1
>ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:04.1: supports USB remote wakeup
>ehci_hcd 0000:00:04.1: irq 22, io mem 0xfe02c000
>ehci_hcd 0000:00:04.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:04.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.1: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:04.1: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
>hub 2-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 5: status 0501 change 0001
>hub 2-0:1.0: state 7 ports 6 chg 0022 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:04.1: port 1 low speed --> companion
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.290.rc5.fc10.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:04.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[AUBA] -> GSI 21 (level, low) -> IRQ 21
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: supports USB remote wakeup
>ohci_hcd 0000:00:02.0: irq 21, io mem 0xfe02f000
>ehci_hcd 0000:00:04.1: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
>hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000044 RHSC SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:04.1: port 5 high speed
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 2-5: new high speed USB device using ehci_hcd and address 3
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
>hub 3-0:1.0: port 1: status 0301 change 0001
>ehci_hcd 0000:00:04.1: port 5 high speed
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.290.rc5.fc10.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [AU1B] enabled at IRQ 20
>ohci_hcd 0000:00:04.0: PCI INT A -> Link[AU1B] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:04.0: setting latency timer to 64
>ohci_hcd 0000:00:04.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:04.0: created debug files
>ohci_hcd 0000:00:04.0: supports USB remote wakeup
>ohci_hcd 0000:00:04.0: irq 20, io mem 0xfe02d000
>usb 2-5: uevent
>usb 2-5: usb_probe_device
>usb 2-5: configuration #1 chosen from 1 choice
>usb 2-5: adding 2-5:1.0 (config #1, interface 0)
>usb 2-5:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 2-5: New USB device found, idVendor=0fe9, idProduct=d500
>usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 3-0:1.0: state 7 ports 6 chg 0002 evt 0000
>hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>ohci_hcd 0000:00:04.0: OHCI controller state
>ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:04.0: intrstatus 0x00000044 RHSC SF
>ohci_hcd 0000:00:04.0: intrenable 0x8000001a MIE UE RD WDH
>ohci_hcd 0000:00:04.0: hcca frame #0003
>ohci_hcd 0000:00:04.0: roothub.a 01000206 POTPGT=1 NPS NDP=6(6)
>ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
>ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
>ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
>ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
>ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: global over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: no over-current condition exists
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
>hub 4-0:1.0: port 1: status 0301 change 0001
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.290.rc5.fc10.i686 ohci_hcd
>usb usb4: SerialNumber: 0000:00:04.0
>USB Universal Host Controller Interface driver v3.0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: default language 0x0409
>usb 3-1: uevent
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>usb 3-1:1.0: uevent
>usb 3-1: adding 3-1:1.1 (config #1, interface 1)
>usb 3-1:1.1: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 3-1: New USB device found, idVendor=045e, idProduct=00db
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Natural® Ergonomic Keyboard 4000
>usb 3-1: Manufacturer: Microsoft
>hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0002
>hub 4-0:1.0: state 7 ports 6 chg 0002 evt 0000
>hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:04.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 4-1: skipped 1 descriptor after interface
>usb 4-1: default language 0x0409
>usb 4-1: uevent
>usb 4-1: usb_probe_device
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>usb 4-1:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 4-1: New USB device found, idVendor=045e, idProduct=008c
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: Microsoft Wireless Optical Mouse® 1.0A
>usb 4-1: Manufacturer: Microsoft
>hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0002
>usbcore: registered new interface driver hiddev
>usbhid 3-1:1.0: usb_probe_interface
>usbhid 3-1:1.0: usb_probe_interface - got id
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input3
>input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-1
>usbhid 3-1:1.1: usb_probe_interface
>usbhid 3-1:1.1: usb_probe_interface - got id
>input: Microsoft Natural® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input4
>input,hidraw1: USB HID v1.11 Device [Microsoft Natural® Ergonomic Keyboard 4000] on usb-0000:00:02.0-1
>usbhid 4-1:1.0: usb_probe_interface
>usbhid 4-1:1.0: usb_probe_interface - got id
>input: Microsoft Microsoft Wireless Optical Mouse® 1.0A as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input5
>input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.0A] on usb-0000:00:04.0-1
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 4:10:472
>acpi LNXSYSTM:00: hash matches
>debug: unmapping init memory c07f9000..c096d000
>Write protecting the kernel read-only data: 1144k
>pata_acpi 0000:00:06.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>pata_acpi 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>pata_acpi 0000:00:09.0: setting latency timer to 64
>pata_acpi 0000:00:09.0: PCI INT A disabled
>modprobe used greatest stack depth: 2316 bytes left
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:02.1: suspend root hub
>ahci 0000:00:09.0: version 3.0
>ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
>ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
>ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
>ahci 0000:00:09.0: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 23
>ata2: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026180 irq 23
>ata3: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026200 irq 23
>ata4: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026280 irq 23
>ata5: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026300 irq 23
>ata6: SATA max UDMA/133 abar m8192@0xfe026000 port 0xfe026380 irq 23
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>modprobe used greatest stack depth: 1072 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1220167734.801:2): selinux=0 auid=4294967295 ses=4294967295
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb 3-1: uevent
>usb 3-1:1.0: uevent
>usb 3-1:1.1: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb 4-1: uevent
>usb 4-1:1.0: uevent
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-5: uevent
>usb 2-5:1.0: uevent
>pata_amd 0000:00:06.0: version 0.3.10
>pata_amd 0000:00:06.0: setting latency timer to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ACPI: WMI: Mapper loaded
>ata7.01: NODEV after polling detection
>ata7.00: ATAPI: BENQ    DVD DD DW1620, B7T9, max UDMA/33
>ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata7.00: configured for UDMA/33
>ata8: port disabled. ignoring.
>scsi 6:0:0:0: CD-ROM            BENQ     DVD DD DW1620    B7T9 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:0a.0: setting latency timer to 64
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:22:15:2d:58:7d
>forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>firewire_ohci 0000:01:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: failed to set phy reg bits.
>firewire_ohci 0000:01:0a.0: PCI INT A disabled
>firewire_ohci: probe of 0000:01:0a.0 failed with error -5
>gameport: EMU10K1 is pci0000:01:0b.1/gameport0, io 0xc800, speed 552kHz
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>dvb_usb_cxusb 2-5:1.0: usb_probe_interface
>dvb_usb_cxusb 2-5:1.0: usb_probe_interface - got id
>dvb-usb: found a 'DViCO FusionHDTV5 USB Gold' in cold state, will try to load a firmware
>firmware: requesting dvb-usb-bluebird-01.fw
>dvb-usb: downloading firmware from file 'dvb-usb-bluebird-01.fw'
>usbcore: registered new interface driver dvb_usb_cxusb
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001002 POWER sig=se0 CSC
>hub 2-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
>hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x100
>usb 2-5: USB disconnect, address 3
>usb 2-5: unregistering device
>usb 2-5: usb_disable_device nuking all URBs
>usb 2-5: unregistering interface 2-5:1.0
>dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
>usb 2-5:1.0: uevent
>usb 2-5: uevent
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
>nvidia 0000:02:00.0: PCI INT A -> Link[AIGP] -> GSI 21 (level, low) -> IRQ 21
>nvidia 0000:02:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  177.70  Wed Aug 27 12:50:24 PDT 2008
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0020
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
>hub 2-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
>hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:04.1: port 5 high speed
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 2-5: new high speed USB device using ehci_hcd and address 4
>ehci_hcd 0000:00:04.1: port 5 high speed
>ehci_hcd 0000:00:04.1: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
>usb 2-5: default language 0x0409
>usb 2-5: uevent
>usb 2-5: usb_probe_device
>usb 2-5: configuration #1 chosen from 1 choice
>usb 2-5: adding 2-5:1.0 (config #1, interface 0)
>usb 2-5:1.0: uevent
>dvb_usb_cxusb 2-5:1.0: usb_probe_interface
>dvb_usb_cxusb 2-5:1.0: usb_probe_interface - got id
>dvb-usb: found a 'DViCO FusionHDTV5 USB Gold' in warm state.
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (DViCO FusionHDTV5 USB Gold)
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>HDA Intel 0000:00:07.0: PCI INT A -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
>HDA Intel 0000:00:07.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_intel.c:2083: chipset global capabilities = 0x4401
>ALSA sound/pci/hda/hda_intel.c:758: codec_mask = 0x9
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0)
>ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x11
>ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Headphone Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Line-Out Playback Volume, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Speaker Playback Switch, skipped
>ALSA sound/pci/hda/hda_codec.c:1127: Cannot find slave Mono Playback Switch, skipped
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>EMU10K1_Audigy 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
>ALSA sound/pci/emu10k1/emu10k1_main.c:1749: vendor=0x1102, device=0x2, subsystem_vendor_id=0x80401102, subsystem_id=0x8040
>ALSA sound/pci/emu10k1/emu10k1_main.c:1774: Sound card name=SBLive! Platinum [CT4760P]
>tuner-simple 0-0061: creating new instance
>tuner-simple 0-0061: type set to 64 (LG TDVS-H06xF)
>input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:04.1/usb2/2-5/input/input7
>dvb-usb: schedule remote query interval to 100 msecs.
>dvb-usb: DViCO FusionHDTV5 USB Gold successfully initialized and connected.
>drivers/usb/core/inode.c: creating file '004'
>usb 2-5: New USB device found, idVendor=0fe9, idProduct=d501
>usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5: Product: Bluebird
>usb 2-5: Manufacturer: Dvico
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>EXT3 FS on sda9, internal journal
>Adding 1028120k swap on /dev/sda8.  Priority:-1 extents:1 across:1028120k
>powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (2500 MHz)
>powernow-k8:    1 : pstate 1 (1250 MHz)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>fuse init (API version 7.9)
>Loading iSCSI transport class v2.0-870.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>eth0: no IPv6 routers present
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x6, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x2, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x4, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x5, stream=0x5, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x6
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x2
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x4
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x5
>tomboy[3609]: segfault at 3afe198 ip 03afe198 sp bf9877e4 error 4 in libclearlooks.so[46ca000+28000]
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_intel.c:1404: azx_pcm_prepare: bufsize=0x10000, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x8, stream=0x1, channel=0, format=0x4011
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x8
>totem-video-ind[5819] general protection ip:12015b sp:bfa74720 error:0 in ld-2.8.90.so[110000+20000]

Actions: View

Attachments on bug 460760: 315436 | 315438 | 315439 | 315471