Attachment 316181 Details for Bug 461601 – console output from hung boot

[patch] console output from hung boot

serial-hang-console.out (text/plain), 11.82 KB, created by Jeff Layton on 2008-09-09 11:58:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Layton

Created: 2008-09-09 11:58:13 UTC

Size: 11.82 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.314.rc5.git9.fc10.x86_64 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.3.2 20080905 (Red Hat 4.3.2-3) (GCC) ) #1 SMP Sun Sep 7 20:45:30 EDT 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fffac00 (usable)
> BIOS-e820: 000000001fffac00 - 0000000020000000 (reserved)
>last_pfn = 0x1fffa max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>last_map_addr: 1fffa000 end: 1fffa000
>RAMDISK: 1fc87000 - 1ffe9e09
>DMI 2.4 present.
>ACPI: RSDP 000EB0F0, 0024 (r2    Xen)
>ACPI: XSDT 000EB060, 0044 (r1    Xen      HVM        0 HVML        0)
>ACPI: FACP 000EAE30, 00F4 (r4    Xen      HVM        0 HVML        0)
>ACPI: DSDT 000EA040, 0D67 (r2    Xen      HVM        0 INTL 20060707)
>ACPI: FACS 000EA000, 0040
>ACPI: APIC 000EAF30, 008A (r2    Xen      HVM        0 HVML        0)
>ACPI: HPET 000EAFC0, 0038 (r1    Xen      HVM        0 HVML        0)
>ACPI: SSDT 000EAFF8, 005F (r2    Xen      HVM        0 HVML        0)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001fffa000
>Bootmem setup node 0 0000000000000000-000000001fffa000
>  NODE_DATA [0000000000009000 - 0000000000020fff]
>  bootmap [0000000000021000 -  0000000000024fff] pages 4
>(6 early reservations) ==> bootmem [0000000000 - 001fffa000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0001520008]    TEXT DATA BSS ==> [0000200000 - 0001520008]
>  #3 [001fc87000 - 001ffe9e09]          RAMDISK ==> [001fc87000 - 001ffe9e09]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>found SMP MP-table at [ffff8800000fcd10] 000fcd10
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001fffa
>ACPI: PM-Timer IO Port: 0x1f48
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 7 global_irq 7 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
>PERCPU: Allocating 1647392 bytes of per cpu data
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 127795
>Policy zone: DMA32
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2992.454 MHz processor.
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 4095 kB
> per task-struct memory footprint: 2688 bytes
>Checking aperture...
>No AGP bridge found
>Memory: 481808k/524264k available (3243k kernel code, 42068k reserved, 1838k data, 2776k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.90 BogoMIPS (lpj=2992454)
>Security Framework initialized
>SELinux:  Initializing.
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 0b
>Using local APIC timer interrupts.
>Detected 6.249 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/2 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5985.82 BogoMIPS (lpj=2992913)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/2 -> Node 0
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]:
>Measured 132514728 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>lockdep: fixing up alternatives.
>Booting processor 2/4 ip 6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5982.50 BogoMIPS (lpj=2991253)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/4 -> Node 0
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 0b
>lockdep: fixing up alternatives.
>Booting processor 3/6 ip 6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5984.16 BogoMIPS (lpj=2992081)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/6 -> Node 0
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Xeon(R) CPU            5160  @ 3.00GHz stepping 0b
>Brought up 4 CPUs
>Total of 4 processors activated (23937.40 BogoMIPS).
>khelper used greatest stack depth: 4864 bytes left
>net_namespace: 1680 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:45:29  Date: 09/09/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>pci 0000:00:01.2: quirk: region 1f40-1f7f claimed by PIIX4 ACPI
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 93517752 Hz
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:03: ioport range 0x8a0-0x8a3 has been reserved
>system 00:03: ioport range 0xcc0-0xccf has been reserved
>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Clocksource tsc unstable (delta = 4397366094059 ns)
>debug: unmapping init memory ffff88001fc87000..ffff88001ffea000
>audit: initializing netlink socket (disabled)
>type=2000 audit(1220960727.245:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 941
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:00:01.0: PIIX3: Enabling Passive Release
>pci 0000:00:01.0: Activating ISA DMA hang workarounds
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>processor ACPI0007:00: registered as cooling_device0
>processor ACPI0007:01: registered as cooling_device1
>processor ACPI0007:02: registered as cooling_device2
>processor ACPI0007:03: registered as cooling_device3
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>Driver 'sd' needs updating - please use bus_type methods
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:01.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:01.3: UHCI Host Controller
>uhci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:01.3: detected 2 ports
>uhci_hcd 0000:00:01.3: irq 23, io base 0x0000c020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.314.rc5.git9.fc10.x86_64 uhci_hcd
>usb usb1: SerialNumber: 0000:00:01.3
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:96:782
>debug: unmapping init memory ffffffff8176b000..ffffffff81a21000
>Write protecting the kernel read-only data: 1444k
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
>plymouthd used greatest stack depth: 4736 bytes left
>modprobe used greatest stack depth: 4728 bytes left
>
>

Actions: View | Diff

Attachments on bug 461601: 316181