Attachment 316292 Details for Bug 461727 – dmesg output of modesetting oops

dmesg output of modesetting oops

crash_dmesg.txt (text/plain), 47.79 KB, created by Danny Baumann on 2008-09-10 08:56:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Danny Baumann

Created: 2008-09-10 08:56:30 UTC

Size: 47.79 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.314.rc5.git9.fc10.i686 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.3.2 20080905 (Red Hat 4.3.2-3) (GCC) ) #1 SMP Sun Sep 7 20:57:41 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>last_pfn = 0x7fff0 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37d31000 - 37fef636
>DMI 2.2 present.
>ACPI: RSDP 000F75E0, 0014 (r0 Nvidia)
>ACPI: RSDT 7FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FFF30C0, 4561 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FFF0000, 0040
>ACPI: APIC 7FFF7640, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000e7e59c]    TEXT DATA BSS ==> [0000400000 - 0000e7e59c]
>  #4 [0037d31000 - 0037fef636]          RAMDISK ==> [0037d31000 - 0037fef636]
>  #5 [0000e7f000 - 0000e95000]    INIT_PG_TABLE ==> [0000e7f000 - 0000e95000]
>  #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x0007fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007fff0
>On node 0 totalpages: 524175
>free_area_init_node: node 0, pgdat c07dcd00, node_mem_map c1001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 290864 pages, LIFO batch:31
>Using APIC driver default
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>PERCPU: Allocating 1221020 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517007
>Kernel command line: ro root=UUID=fe55ecc1-4606-4c69-a802-21c9b2e174ac rhgb nomodeset 3
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c098f000 soft=c096f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2104.730 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 2463 kB
> per task-struct memory footprint: 1920 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2051324k/2097088k available (2662k kernel code, 44524k reserved, 1385k data, 1488k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07f8000 - 0xc096c000   (1488 kB)
>      .data : 0xc069990f - 0xc07f3d48   (1385 kB)
>      .text : 0xc0400000 - 0xc069990f   (2662 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4209.46 BogoMIPS (lpj=2104730)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>debug: unmapping init memory c07f5000..c07f8000
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm)  stepping 01
>Brought up 1 CPUs
>Total of 1 processors activated (4209.46 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5296 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>khelper used greatest stack depth: 3028 bytes left
>net_namespace: 912 bytes
>Booting paravirtualized kernel on bare hardware
>Time:  7:24:34  Date: 09/10/08
>khelper used greatest stack depth: 2924 bytes left
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
>PCI: Using configuration type 1 for base access
>khelper used greatest stack depth: 2604 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:02.2: supports D1
>pci 0000:00:02.2: supports D2
>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.2: PME# disabled
>pci 0000:00:04.0: supports D1
>pci 0000:00:04.0: supports D2
>pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: supports D1
>pci 0000:00:05.0: supports D2
>pci 0000:00:06.0: supports D1
>pci 0000:00:06.0: supports D2
>pci 0000:00:0d.0: supports D1
>pci 0000:00:0d.0: supports D2
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:01:07.0: supports D1
>pci 0000:01:07.0: supports D2
>pci 0000:01:07.1: supports D1
>pci 0000:01:07.1: supports D2
>pci 0000:01:09.0: PME# supported from D3hot D3cold
>pci 0000:01:09.0: PME# disabled
>pci 0000:01:0b.0: supports D1
>pci 0000:01:0b.0: supports D2
>PCI: bridge 0000:00:08.0 io port: [9000, afff]
>PCI: bridge 0000:00:08.0 32bit mmio: [d2000000, d3ffffff]
>PCI: bridge 0000:00:08.0 32bit mmio pref: [d0000000, d0ffffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: supports D2
>pci 0000:03:00.1: supports D1
>pci 0000:03:00.1: supports D2
>PCI: bridge 0000:00:1e.0 io port: [c000, cfff]
>PCI: bridge 0000:00:1e.0 32bit mmio: [b0000000, cfffffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16)
>ACPI: PCI Interrupt Link [APC2] (IRQs *17)
>ACPI: PCI Interrupt Link [APC3] (IRQs *18)
>ACPI: PCI Interrupt Link [APC4] (IRQs *19)
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23)
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:00: ioport range 0x4000-0x407f has been reserved
>system 00:00: ioport range 0x4080-0x40ff has been reserved
>system 00:00: ioport range 0x4400-0x447f has been reserved
>system 00:00: ioport range 0x4480-0x44ff has been reserved
>system 00:00: ioport range 0x4200-0x427f has been reserved
>system 00:00: ioport range 0x4280-0x42ff has been reserved
>system 00:01: ioport range 0x5000-0x503f has been reserved
>system 00:01: ioport range 0x5500-0x553f has been reserved
>system 00:02: iomem range 0xd8800-0xdbfff has been reserved
>system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:02: iomem range 0xfc000-0xfffff could not be reserved
>system 00:02: iomem range 0x7fff0000-0x7fffffff could not be reserved
>system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:02: iomem range 0x0-0x9ffff could not be reserved
>system 00:02: iomem range 0x100000-0x7ffeffff could not be reserved
>system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:08.0:   IO window: 0x9000-0xafff
>pci 0000:00:08.0:   MEM window: 0xd2000000-0xd3ffffff
>pci 0000:00:08.0:   PREFETCH window: 0x000000d0000000-0x000000d0ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1e.0:   MEM window: 0xb0000000-0xcfffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000088000000-0x000000880fffff
>pci 0000:00:08.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [9000, afff]
>bus: 01 index 1 mmio: [d2000000, d3ffffff]
>bus: 01 index 2 mmio: [d0000000, d0ffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [c000, cfff]
>bus: 03 index 1 mmio: [b0000000, cfffffff]
>bus: 03 index 2 mmio: [88000000, 880fffff]
>bus: 03 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory f7d31000..f7ff0000
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1221031474.658:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1704
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:03:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>processor ACPI0007:00: registered as cooling_device0
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart-nvidia 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>serial 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
>0000:01:09.0: ttyS2 at I/O 0x9828 (irq = 17) is a 8250
>0000:01:09.0: ttyS3 at I/O 0x9840 (irq = 17) is a 8250
>Couldn't register serial port 0000:01:09.0: -28
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22
>ehci_hcd 0000:00:02.2: setting latency timer to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2 pcc=4 !ppc ports=6
>ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0 
>ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame 256/512/1024 park
>ehci_hcd 0000:00:02.2: park 0
>ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.2: debug port 1
>ehci_hcd 0000:00:02.2: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.2: supports USB remote wakeup
>ehci_hcd 0000:00:02.2: irq 22, io mem 0xd4083000
>ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:02.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 2: status 0501 change 0001
>ehci_hcd 0000:00:02.2: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 6 chg 000c evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.314.rc5.git9.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: supports USB remote wakeup
>ohci_hcd 0000:00:02.0: irq 21, io mem 0xd4087000
>ehci_hcd 0000:00:02.2: port 2 high speed
>ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: global over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: no over-current condition exists
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>ehci_hcd 0000:00:02.2: port 2 high speed
>ehci_hcd 0000:00:02.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.314.rc5.git9.fc10.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
>ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20
>ohci_hcd 0000:00:02.1: setting latency timer to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: created debug files
>ohci_hcd 0000:00:02.1: supports USB remote wakeup
>ohci_hcd 0000:00:02.1: irq 20, io mem 0xd4082000
>ohci_hcd 0000:00:02.1: OHCI controller state
>ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.1: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.1: hcca frame #0003
>ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
>ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>usb 1-2: default language 0x0409
>usb 1-2: uevent
>usb 1-2: usb_probe_device
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: adding 1-2:1.0 (config #1, interface 0)
>usb 1-2:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 1-2: New USB device found, idVendor=03f0, idProduct=4117
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: HP LaserJet 1018
>usb 1-2: Manufacturer: Hewlett-Packard
>usb 1-2: SerialNumber: KP05JSL
>hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:02.2: port 3 high speed
>ehci_hcd 0000:00:02.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.314.rc5.git9.fc10.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:02.1
>USB Universal Host Controller Interface driver v3.0
>PNP: No PS/2 controller found. Probing ports directly.
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>ehci_hcd 0000:00:02.2: port 3 high speed
>ehci_hcd 0000:00:02.2: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT
>usb 1-3: uevent
>usb 1-3: usb_probe_device
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>usb 1-3:1.0: uevent
>hub 1-3:1.0: usb_probe_interface
>hub 1-3:1.0: usb_probe_interface - got id
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 4 ports detected
>hub 1-3:1.0: standalone hub
>hub 1-3:1.0: individual port power switching
>hub 1-3:1.0: individual port over-current protection
>hub 1-3:1.0: TT per port
>hub 1-3:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-3:1.0: Port indicators are supported
>hub 1-3:1.0: power on to power good time: 100ms
>hub 1-3:1.0: local power source is good
>hub 1-3:1.0: enabling power on all ports
>hub 1-3:1.0: port 1: status 0301 change 0001
>hub 1-3:1.0: port 4: status 0301 change 0001
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usb 1-3: link qh256-0001/f6b17180 start 255 [1/0 us]
>drivers/usb/core/inode.c: creating file '003'
>usb 1-3: New USB device found, idVendor=04b4, idProduct=6560
>usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
>hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
>hub 1-3:1.0: state 7 ports 4 chg 0012 evt 0000
>hub 1-3:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>usb 1-3.1: new low speed USB device using ehci_hcd and address 4
>usb 1-3.1: skipped 1 descriptor after interface
>usb 1-3.1: skipped 1 descriptor after interface
>usb 1-3.1: default language 0x0409
>usb 1-3.1: uevent
>usb 1-3.1: usb_probe_device
>usb 1-3.1: configuration #1 chosen from 1 choice
>usb 1-3.1: adding 1-3.1:1.0 (config #1, interface 0)
>usb 1-3.1:1.0: uevent
>usb 1-3.1: adding 1-3.1:1.1 (config #1, interface 1)
>usb 1-3.1:1.1: uevent
>drivers/usb/core/inode.c: creating file '004'
>usb 1-3.1: New USB device found, idVendor=046d, idProduct=c505
>usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3.1: Product: USB Receiver
>usb 1-3.1: Manufacturer: Logitech
>hub 1-3:1.0: port 4, status 0301, change 0000, 1.5 Mb/s
>usb 1-3.4: new low speed USB device using ehci_hcd and address 5
>usb 1-3.4: skipped 1 descriptor after interface
>usb 1-3.4: default language 0x0409
>usb 1-3.4: uevent
>usb 1-3.4: usb_probe_device
>usb 1-3.4: configuration #1 chosen from 1 choice
>usb 1-3.4: adding 1-3.4:1.0 (config #1, interface 0)
>usb 1-3.4:1.0: uevent
>drivers/usb/core/inode.c: creating file '005'
>usb 1-3.4: New USB device found, idVendor=046d, idProduct=c20a
>usb 1-3.4: New USB device strings: Mfr=4, Product=32, SerialNumber=0
>usb 1-3.4: Product: WingMan RumblePad
>usb 1-3.4: Manufacturer: Logitech Inc.
>usbcore: registered new interface driver hiddev
>usbhid 1-3.1:1.0: usb_probe_interface
>usbhid 1-3.1:1.0: usb_probe_interface - got id
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.1/1-3.1:1.0/input/input3
>usb 1-3.1: link qh8-0e01/f6b17300 start 7 [1/2 us]
>input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.2-3.1
>usbhid 1-3.1:1.1: usb_probe_interface
>usbhid 1-3.1:1.1: usb_probe_interface - got id
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.1/1-3.1:1.1/input/input4
>usb 1-3.1: link qh8-0e01/f6b17380 start 7 [1/2 us]
>input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-3.1
>usbhid 1-3.4:1.0: usb_probe_interface
>usbhid 1-3.4:1.0: usb_probe_interface - got id
>ohci_hcd 0000:00:02.0: auto-stop root hub
>ohci_hcd 0000:00:02.1: auto-stop root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ohci_hcd 0000:00:02.0: suspend root hub
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>ohci_hcd 0000:00:02.1: suspend root hub
>usbhid: timeout initializing reports
>input: Logitech Inc. WingMan RumblePad as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3.4/1-3.4:1.0/input/input5
>input,hidraw2: USB HID v1.10 Joystick [Logitech Inc. WingMan RumblePad] on usb-0000:00:02.2-3.4
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:882:419
>debug: unmapping init memory c07f8000..c096c000
>Write protecting the kernel read-only data: 1144k
>khelper used greatest stack depth: 2508 bytes left
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>pci 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>modprobe used greatest stack depth: 2280 bytes left
>sata_sil 0000:01:0b.0: version 2.3
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
>scsi0 : sata_sil
>scsi1 : sata_sil
>ata1: SATA max UDMA/100 mmio m512@0xd3000000 tf 0xd3000080 irq 18
>ata2: SATA max UDMA/100 mmio m512@0xd3000000 tf 0xd30000c0 irq 18
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB00, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203N  SB00 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>modprobe used greatest stack depth: 1212 bytes left
>pata_amd 0000:00:09.0: version 0.3.10
>pata_amd 0000:00:09.0: setting latency timer to 64
>scsi2 : pata_amd
>scsi3 : pata_amd
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata3.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-120, 1.22, max UDMA/66
>ata3: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc50000) ACPI=0x1f01f (600:30:0x1c)
>ata3.01: configured for UDMA/66
>scsi 2:0:1:0: CD-ROM            PIONEER  DVD-ROM DVD-120  1.22 PQ: 0 ANSI: 5
>scsi 2:0:1:0: Attached scsi generic sg2 type 5
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1221031494.042:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 105325 rules.
>SELinux: 8192 avtab hash slots, 105325 rules.
>SELinux:  8 users, 11 roles, 2447 types, 119 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 105325 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1221031495.707:3): policy loaded auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-2: uevent
>usb 1-2:1.0: uevent
>usb 1-3: uevent
>usb 1-3.1: uevent
>usb 1-3.1:1.0: uevent
>usb 1-3.1:1.1: uevent
>usb 1-3.4: uevent
>usb 1-3.4:1.0: uevent
>usb 1-3:1.0: uevent
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>usblp 1-2:1.0: usb_probe_interface
>usblp 1-2:1.0: usb_probe_interface - got id
>drivers/usb/core/file.c: looking for a minor, starting at 0
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x4117
>usbcore: registered new interface driver usblp
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
>forcedeth 0000:00:04.0: setting latency timer to 64
>forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:0e:a6:e0:cf:57
>forcedeth 0000:00:04.0: timirq lnktim desc-v1
>gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0x9400, speed 59659kHz
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>sr 2:0:1:0: Attached scsi CD-ROM sr1
>EMU10K1_Audigy 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
>ALSA sound/pci/emu10k1/emu10k1_main.c:1749: vendor=0x1102, device=0x2, subsystem_vendor_id=0x80271102, subsystem_id=0x8027
>ALSA sound/pci/emu10k1/emu10k1_main.c:1774: Sound card name=SBLive! Value [CT4832]
>modprobe used greatest stack depth: 1096 bytes left
>Linux video capture interface: v2.00
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>bttv 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
>bttv0: Bt848 (rev 18) at 0000:01:0a.0, irq: 16, latency: 32, mmio: 0xd0000000
>bttv0: using:  *** UNKNOWN/GENERIC ***  [card=0,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init]
>tveeprom 2-0050: Huh, no eeprom present (err=-6)?
>bttv0: tuner type unset
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: registered device video0
>bttv0: registered device vbi0
>ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
>firewire_ohci 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21
>firewire_ohci 0000:00:0d.0: setting latency timer to 64
>firewire_ohci: Added fw-ohci device 0000:00:0d.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
>Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
>Intel ICH 0000:00:06.0: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 50750 usecs
>intel8x0: clocking to 47455
>modprobe used greatest stack depth: 972 bytes left
>firewire_core: created device fw0: GUID 00e0180000e04ec7, S400
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ppdev: user-space parallel port driver
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2097104k swap on /dev/sda6.  Priority:-1 extents:1 across:2097104k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>type=1400 audit(1221024316.238:4): avc:  denied  { write } for  pid=2001 comm="ip" path="/0" dev=devpts ino=2 scontext=system_u:system_r:ifconfig_t:s0 tcontext=system_u:object_r:devpts_t:s0 tclass=chr_file
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.12
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.10
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>serial8250: too much work for irq17
>serial8250: too much work for irq17
>usb usb3: usb auto-resume
>ohci_hcd 0000:00:02.1: resume root hub
>hub 3-0:1.0: hub_resume
>usb usb2: usb auto-resume
>ohci_hcd 0000:00:02.0: resume root hub
>hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
>hub 2-0:1.0: hub_resume
>hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
>ohci_hcd 0000:00:02.1: auto-stop root hub
>ohci_hcd 0000:00:02.0: auto-stop root hub
>hub 3-0:1.0: hub_suspend
>usb usb3: bus auto-suspend
>ohci_hcd 0000:00:02.1: suspend root hub
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>ohci_hcd 0000:00:02.0: suspend root hub
>[drm] Module unloaded
>[drm] Initialized drm 1.1.0 20060810
>[drm:drm_init] 
>[drm:drm_get_dev] 
>[drm:drm_get_minor] 
>[drm:drm_get_minor] new minor assigned 64
>[drm:drm_get_minor] 
>[drm:drm_get_minor] new minor assigned 0
>[drm:radeon_driver_load] AGP card detected
>[drm:drm_addmap_core] offset = 0xc1000000, size = 0x00010000, type = 1
>[drm:radeon_get_bios] ATOMBIOS detected
>ATOM BIOS: RADEON X800XL                                                               
>[drm:radeon_get_vram_type] RAM width 128 bits DDR
>[drm] Detected VRAM RAM=262144K, accessible=262144K, BAR=262144K
>[drm:drm_bo_prepare_for_validate] Proposed flags 0x0000000002010031, Old flags 0x00000000010100a0
>[drm:drm_agp_populate] drm_agp_populate_ttm
>[drm:drm_agp_populate] Current page count is 0
>[drm:drm_agp_bind_ttm] drm_agp_bind_ttm
>[drm:drm_agp_bind_ttm] *ERROR* AGP Bind memory failed
>[drm:drm_ttm_bind] *ERROR* Couldn't bind backend.
>[drm:drm_buffer_object_validate] *ERROR* Failed moving buffer.
>[drm:drm_bo_destroy_locked] freeing f512e000
>[drm:drm_agp_destroy_ttm] drm_agp_destroy_ttm
>[drm:drm_agp_clear_ttm] drm_agp_clear_ttm
>[drm:drm_agp_unbind_ttm] drm_agp_unbind_ttm
>[drm:radeon_alloc_gart_objects] *ERROR* failed to allocate ring
>[drm:radeon_get_atom_connector_info_from_bios_connector_table] Skipping TV Out
>[drm:radeon_get_atom_connector_info_from_bios_connector_table] Skipping Component Video
>[drm:radeon_get_atom_connector_info_from_bios_connector_table] BIOS Connector table
>[drm:radeon_get_atom_connector_info_from_bios_connector_table] Port 0: ddc_type 0x64, dac_type 1, tmds_type 0, connector type 1, hpd_mask 0
>[drm:radeon_get_atom_connector_info_from_bios_connector_table] Port 3: ddc_type 0x68, dac_type 2, tmds_type 1, connector type 2, hpd_mask 0
>[drm:drm_sysfs_connector_add] adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:radeon_encoder_legacy_primary_dac_add] 
>[drm:drm_sysfs_connector_add] adding "DVI-I-1" to sysfs
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:radeon_encoder_legacy_tv_dac_add] 
>[drm:radeon_encoder_legacy_tmds_int_add] 
>[drm] DFP table revision: 190
>[drm] No TMDS info found in BIOS
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:03:00.0: VGA-1: no EDID data
>[drm:drm_helper_plugged_event] 
>[drm:drm_helper_probe_single_connector_modes] VGA-1
>i2c-adapter i2c-3: unable to read EDID block.
>pci 0000:03:00.0: VGA-1: no EDID data
>[drm:drm_helper_probe_single_connector_modes] VGA-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes] DVI-I-1
>[drm:drm_helper_probe_single_connector_modes] Probed modes for DVI-I-1
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 60019 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 18:"1280x1024" 75024 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 25:"1152x864" 75000 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75075 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70068 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60003 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 22:"832x624" 74550 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72186 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75000 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 11:"800x600" 60315 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 12:"800x600" 56249 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[drm:drm_mode_debug_printmodeline] Modeline 14:"640x480" 72807 31500 640 664 704 832 480 489 491 520 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 13:"640x480" 75000 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 15:"640x480" 66666 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 16:"640x480" 60000 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[drm:drm_mode_debug_printmodeline] Modeline 17:"720x400" 70080 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[drm:drm_mode_debug_printmodeline] Modeline 28:"0x0" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:radeonfb_probe] 
>[drm:radeonfb_single_fb_probe] 
>[drm:drm_bo_prepare_for_validate] Proposed flags 0x0000000004010027, Old flags 0x00000000010100a0
>[drm:radeon_gem_object_alloc] f513ad20 : size 0x500000, alignment 1, initial_domain 4
>[drm:drm_bo_prepare_for_validate] Proposed flags 0x0000000004010037, Old flags 0x0000000004010027
>[drm:radeonfb_create] fb depth is 24
>[drm:radeonfb_create]    pitch is 5120
>allocated f41fc0c0 1280x1024 fb: 0x00040000, bo f424a5b0
>fbcon: radeondrmfb (fb0) is primary device
>[drm:radeonfb_set_par] 1280 -1
>Console: switching to colour frame buffer device 160x64
>[drm:drm_crtc_helper_set_config] 
>[drm:drm_crtc_helper_set_config] crtc: f4218000 3 fb: f435d2d0 connectors: f4218440 num_connectors: 1 (x, y) (0, 0)
>[drm:drm_crtc_helper_set_config] modes are different
>[drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 60019 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[drm:drm_crtc_helper_set_config] attempting to set mode from userspace
>[drm:drm_mode_debug_printmodeline] Modeline 29:"1280x1024" 60019 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[drm:radeon_legacy_tmds_int_dpms] 
>[drm:radeon_crtc_dpms] 
>[drm:radeon_crtc_mode_set] 
>[drm:radeon_set_crtc1_base] 
>[drm:radeon_set_crtc1_base] mc_fb_location: 0xb0000000
>[drm:radeon_set_crtc1_timing] 
>[drm:radeon_set_pll1] 
>[drm:radeon_compute_pll] PLL freq 108000 2 1023
>[drm:radeon_set_pll1] dc=10800, fd=16, rd=2, pd=2
>[drm:radeon_set_pll1] Wrote: 0x00000002 0x00010010 0x00000000 (0x00008f00)
>[drm:radeon_set_pll1] Wrote: rd=2, fd=16, pd=1
>[drm] TMDS-9: set mode 1280x1024 1d
>[drm:radeon_legacy_tmds_int_mode_set] 
>[drm:radeon_legacy_rmx_mode_set] 
>[drm:radeon_crtc_dpms] 
>[drm:radeon_legacy_tmds_int_dpms] 
>[drm:radeon_legacy_primary_dac_dpms] 
>[drm:radeon_legacy_primary_dac_dpms] 
>[drm:radeon_legacy_tv_dac_dpms] 
>[drm:radeon_crtc_dpms] 
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm:radeon_legacy_primary_dac_dpms] 
>[drm:radeon_legacy_primary_dac_dpms] 
>[drm:radeon_legacy_tv_dac_dpms] 
>[drm:radeon_crtc_dpms] 
>[drm:drm_sysfs_hotplug_event] generating hotplug event
>[drm:radeon_modeset_cp_resume] *ERROR* microcode loading
>[drm:radeon_cp_load_microcode] 
>[drm] Loading R400 Microcode
>BUG: unable to handle kernel NULL pointer dereference at 00000000
>IP: [<f8880f2a>] :radeon:radeon_cp_init_ring_buffer+0x1e8/0x422
>*pde = 7f340067 
>Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
>Modules linked in: radeon(+) drm rfcomm l2cap bluetooth autofs4 fuse sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_log dm_multipath dm_mod ppdev floppy pcspkr snd_emu10k1_synth snd_intel8x0 snd_seq_dummy snd_emux_synth firewire_ohci firewire_core snd_seq_virmidi bttv snd_seq_midi_emul crc_itu_t videodev v4l1_compat ir_common compat_ioctl32 v4l2_common snd_emu10k1 videobuf_dma_sg snd_seq_oss videobuf_core btcx_risc snd_seq_midi_event sr_mod tveeprom snd_rawmidi snd_seq cdrom snd_ac97_codec ac97_bus emu10k1_gp snd_seq_device snd_pcm_oss snd_util_mem snd_mixer_oss gameport snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc forcedeth joydev usblp parport_pc parport i2c_nforce2 usb_storage pata_amd sata_sil ext3 jbd mbcache i2c_algo_bit i2c_core [last unloaded: drm]
>
>Pid: 2920, comm: modprobe Not tainted (2.6.27-0.314.rc5.git9.fc10.i686 #1)
>EIP: 0060:[<f8880f2a>] EFLAGS: 00010282 CPU: 0
>EIP is at radeon_cp_init_ring_buffer+0x1e8/0x422 [radeon]
>EAX: 00000000 EBX: f41fd0f0 ECX: f41fd0f0 EDX: a0000000
>ESI: a0000000 EDI: f41fc0c0 EBP: f6aebeb8 ESP: f6aebea8
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
>Process modprobe (pid: 2920, ti=f6aeb000 task=f4200000 task.ti=f6aeb000)
>Stack: f6aebeb8 f41fd0f0 f41fc0c0 00000000 f6aebed0 f888240e f88a3d38 f889e7c8 
>       f41fd0f0 f41fc0c0 f6aebee0 f8883001 f41fd0f0 f41fd0f0 f6aebef8 f888342c 
>       f41fc0c0 f41fc0c0 f50d7f30 00000000 f6aebf1c f89055cc f88b1b30 f88b2654 
>Call Trace:
> [<f888240e>] ? radeon_modeset_cp_resume+0x56/0x7c [radeon]
> [<f8883001>] ? radeon_modeset_cp_init+0x9c/0xa0 [radeon]
> [<f888342c>] ? radeon_driver_load+0x427/0x44c [radeon]
> [<f89055cc>] ? drm_get_dev+0x360/0x3f3 [drm]
> [<f89017d1>] ? drm_init+0x49/0x7e [drm]
> [<f883305c>] ? radeon_init+0x5c/0x5e [radeon]
> [<c0401139>] ? do_one_initcall+0x42/0x133
> [<f8833000>] ? radeon_init+0x0/0x5e [radeon]
> [<c0409617>] ? sched_clock+0x8/0xb
> [<c044c0f4>] ? trace_hardirqs_on+0xb/0xd
> [<c044c0c8>] ? trace_hardirqs_on_caller+0xf9/0x11a
> [<c0454fa2>] ? sys_init_module+0x8e/0x183
> [<c0404d02>] ? syscall_call+0x7/0xb
> =======================
>Code: 5c 01 00 00 31 d2 89 10 8b 43 38 31 c9 8d 50 ff 03 53 34 c1 e8 10 66 31 d2 09 c2 89 d8 e8 9c f4 ff ff 8b 83 d0 00 00 00 8b 53 38 <03> 10 8b 87 a4 03 00 00 2b 50 44 eb 14 8b 83 d0 00 00 00 8b 53 
>EIP: [<f8880f2a>] radeon_cp_init_ring_buffer+0x1e8/0x422 [radeon] SS:ESP 0068:f6aebea8
>---[ end trace e5e9fd2ee76c813a ]---

Actions: View

Attachments on bug 461727: 316291 | 316292 | 316667 | 319560 | 319561