Attachment 316362 Details for Bug 461846 – a complete boot- with a subsequent hibernate-cycle

a complete boot- with a subsequent hibernate-cycle

boot-hibernate.txt (text/plain), 52.34 KB, created by Ronald Warsow on 2008-09-10 21:47:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ronald Warsow

Created: 2008-09-10 21:47:26 UTC

Size: 52.34 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
> BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
> BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
> BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>1086MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at [c00f5ab0] 000f5ab0
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   507632
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   507632
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7640, 0024 (r2 Nvidia)
>ACPI: XSDT 7BEF3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 7BEF9D80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 7BEF3280, 6AC0 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS 7BEF0000, 0040
>ACPI: SSDT 7BEF9F80, 028A (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET 7BEFA280, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 7BEFA300, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 7BEF9EC0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40872 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 503666
>Kernel command line: ro root=/dev/VG00/root selinux=0 vga=773 console=tty0 console=tty1 console=ttyS1,115200n8 3
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07c6000 soft=c07a6000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Detected 2605.427 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>console [ttyS1] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2004612k/2030528k available (2257k kernel code, 24632k reserved, 1152k data, 284k init, 1113024k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc075c000 - 0xc07a3000   ( 284 kB)
>      .data : 0xc0634770 - 0xc0754980   (1152 kB)
>      .text : 0xc0400000 - 0xc0634770   (2257 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5214.32 BogoMIPS (lpj=2607161)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080321
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>CPU 1 irqstacks, hard=c07c7000 soft=c07a7000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5210.48 BogoMIPS (lpj=2605243)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (10424.80 BogoMIPS).
>net_namespace: 660 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 11:31:10  Date: 06/26/12
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x4080-0x40ff has been reserved
>system 00:01: ioport range 0x4400-0x447f has been reserved
>system 00:01: ioport range 0x4480-0x44ff has been reserved
>system 00:01: ioport range 0x4800-0x487f has been reserved
>system 00:01: ioport range 0x4880-0x48ff has been reserved
>system 00:01: ioport range 0x2000-0x207f has been reserved
>system 00:01: ioport range 0x2080-0x20ff has been reserved
>system 00:01: iomem range 0x7c000000-0x7fffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfefff0ff could not be reserved
>system 00:0c: iomem range 0x7bef0000-0x7befffff could not be reserved
>system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7beeffff could not be reserved
>system 00:0c: iomem range 0x7c000000-0x7fffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved
>PCI: Bridge: 0000:00:10.0
>  IO window: b000-bfff
>  MEM window: 0xfdd00000-0xfddfffff
>  PREFETCH window: 0x00000000fde00000-0x00000000fdefffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3288k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1340710269.903:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1749
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:10.1: Enabling HT MSI Mapping
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 65536k
>vesafb: mode is 1024x768x8, linelength=1024, pages=3
>vesafb: protected mode interface info at c000:d210
>vesafb: pmi: set display start = c00cd246, set palette = c00cd2b0
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: ACPI0007:01 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:597:530
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel text: 2260k
>Write protecting the kernel read-only data: 940k
>Red Hat nash version 6.0.52 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>LoACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ading ehci-hcd module
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.1
>Loading ohci-hcd module
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>Loading uhci-hcd module
>USB Universal Host Controller Interface driver v3.0
>Loading ext4dev module
>Loading scsi_mod module
>SCSI subsystem initialized
>Loading sd_mod module
>Driver 'sd' needs updating - please use bus_type methods
>Loading libata module
>Loading pata_amd module
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/133
>ata1.00: 78242976 sectors, multi 1: LBA48 
>ata1.00: configured for UDMA/133
>usb 2-3: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input4
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:0b.0-3
>usb 2-3: New USB device found, idVendor=046d, idProduct=c50e
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: USB RECEIVER
>usb 2-3: Manufacturer: Logitech
>ata2.00: ATAPI: BENQ    DVD DD DW1640, BSRB, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            BENQ     DVD DD DW1640    BSRB PQ: 0 ANSI: 5
>Waiting for driver initialization.
>Loading pata_acpi module
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>ACPI: PCI interrupt for device 0000:00:0f.0 disabled
>Waiting for driver initialization.
>Loading ata_generic module
>Loading dm-mod module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Loading dm-mirror module
>Loading dm-zero module
>Loading dm-snapshot module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VG00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VG00" now active
>Trying to resume from /dev/VG00/swap
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald2 starting.  Commit interval 5 seconds
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>		Welcome to Fedora 
>		Press 'I' to enter interactive startup.
>Starting udev: [  OK  ]
>Setting hostname obelix.example.com:  [  OK  ]
>Setting up Logical Volume Management:   3 logical volume(s) in volume group "LVM" now active
>  2 logical volume(s) in volume group "VG00" now active
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>boot: clean, 45/26104 files, 28280/104388 blocks
>[/sbin/fsck.ext3 (1) -- /data] fsck.ext3 -a /dev/LVM/data 
>/dev/LVM/data: clean, 37109/7684096 files, 21625274/30720000 blocks
>[/sbin/fsck.ext3 (1) -- /opt] fsck.ext3 -a /dev/LVM/opt 
>/dev/LVM/opt: clean, 41954/1966080 files, 2078336/7864320 blocks
>[/sbin/fsck.ext3 (1) -- /home] fsck.ext3 -a /dev/LVM/home 
>/dev/LVM/home: clean, 9862/253952 files, 158308/1048576 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>Entering non-interactive startup
>Enabling ondemand cpu frequency scaling: [  OK  ]
>ip6tables: Applying firewall rules: [  OK  ]
>iptables: Applying firewall rules: [  OK  ]
>Checking for module nvidia.ko: [FAILED]
>nvidia.ko for kernel 2.6.26.3-29.fc9.i686 was not found.[WARNING]
>The nvidia driver will not be enabled until one is found.[WARNING]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Starting auditd: [  OK  ]
>Starting system logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting system message bus: [  OK  ]
>Loading fuse module.
>Mounting fuse control filesystem.
>Starting acpi daemon: [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting lm_sensors: loading module it87 k8temp [  OK  ]
>Registering binary handler for qemu applications
>Starting sshd: [  OK  ]
>Starting xinetd: [  OK  ]
>Starting ntpd: [  OK  ]
>Checking kmods exist for 2.6.26.3-29.fc9.i686[  OK  ]
>Starting hard disk temperature monitor daemon (hddtemp): [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ][  OK  ]
>Starting kerneloops:[  OK  ]
>Starting SMB services: [  OK  ]
>Starting atd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting libvirtd daemon: [  OK  ]
>Starting cups: [  OK  ]
>Starting anacron: [  OK  ]
>Starting smartd: [  OK  ]
>
>Fedora release 9 (Sulphur)
>Kernel 2.6.26.3-29.fc9.i686 on an i686 (/dev/ttyS1)
>
>obelix.example.com login: sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>ACPI handle has no context!
>serial 00:09: disabled
>ACPI handle has no context!
>ACPI handle has no context!
>ACPI: PCI interrupt for device 0000:00:10.1 disabled
>ACPI: PCI interrupt for device 0000:00:0f.0 disabled
>ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>ACPI: PCI interrupt for device 0000:00:0b.1 disabled
>ACPI: PCI interrupt for device 0000:00:0b.0 disabled
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>Breaking affinity for irq 1
>Breaking affinity for irq 21
>Breaking affinity for irq 22
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Extended CMOS year: 2000
>PM: Creating hibernation image: 
>PM: Need to copy 29886 pages
>PM: Normal pages needed: 9854 + 1024 + 40, available pages: 219423
>PM: Hibernation image created (29886 pages copied)
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>BUG: unable to handle kernel NULL pointer dereference at 0000003c
>IP: [<c0406ee4>] do_IRQ+0x74/0xc4
>*pde = 00000000 
>Oops: 0002 [#1] SMP 
>Modules linked in: ipt_MASQUERADE iptable_nat nf_nat bridge it87 hwmon_vid fuse ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand powernow_k8 ext3 jbd dm_multipath kvm_amd kvm budget_av saa7146_vv videobuf_dma_sg videobuf_core videodev v4l1_compat budget_core dvb_core saa7146 ttpci_eeprom arc4 ecb crypto_blkcipher snd_hda_intel snd_seq_dummy snd_aw2 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer firewire_ohci firewire_core snd_hwdep snd crc_itu_t floppy sr_mod pcspkr k8temp p54pci p54common i2c_nforce2 mac80211 cfg80211 snd_page_alloc soundcore cdrom sg hwmon i2c_core sata_nv dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_generic pata_acpi pata_amd libata sd_mod scsi_mod ext4dev jbd2 mbcache crc16 uhci_hcd ohci_hcd ehci_hcd [last unloaded: forcedeth]
>
>Pid: 0, comm: swapper Not tainted (2.6.26.3-29.fc9.i686 #1)
>EIP: 0060:[<c0406ee4>] EFLAGS: 00010086 CPU: 1
>EIP is at do_IRQ+0x74/0xc4
>EAX: f7856400 EBX: 00001000 ECX: 00000000 EDX: 00010000
>ESI: 00000005 EDI: 00000280 EBP: f7838f4c ESP: f7838f38
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process swapper (pid: 0, ti=f7838000 task=f7856400 task.ti=f7838000)
>Stack: 00000000 c074a100 c0403024 c07a2880 00000001 f7838f8c c04055eb c0403024 
>       00000001 017fa000 c07a2880 00000001 f7838f8c c079e018 0000007b 0000007b 
>       000000d8 fffffffa c041963b 00000060 00000247 f7838fa0 c0403c2b 00000002 
>Call Trace:
> [<c0403024>] ? default_idle+0x0/0x58
> [<c04055eb>] ? common_interrupt+0x23/0x28
> [<c0403024>] ? default_idle+0x0/0x58
> [<c041963b>] ? native_safe_halt+0x5/0x7
> [<c0403c2b>] ? cpu_idle+0x8f/0xd0
> [<c062c882>] ? start_secondary+0x183/0x18b
> =======================
>Code: 55 ec e8 9e 64 02 00 64 a1 04 b0 79 c0 8b 0c 85 80 21 75 c0 89 e2 81 e2 00 f0 ff ff 39 ca 74 33 8b 02 8d 99 00 10 00 00 8b 52 14 <89> 61 3c 89 01 8b 41 14 81 e2 00 ff 00 00 30 e4 09 c2 89 f0 89 
>EIP: [<c0406ee4>] do_IRQ+0x74/0xc4 SS:ESP 0068:f7838f38
>Kernel panic - not syncing: Fatal exception in interrupt
>BUG: unable to handle kernel NULL pointer dereference at 0000003c
>IP: [<c0406ee4>] do_IRQ+0x74/0xc4
>*pde = 00000000 
>Oops: 0002 [#2] SMP 
>Modules linked in: ipt_MASQUERADE iptable_nat nf_nat bridge it87 hwmon_vid fuse ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand powernow_k8 ext3 jbd dm_multipath kvm_amd kvm budget_av saa7146_vv videobuf_dma_sg videobuf_core videodev v4l1_compat budget_core dvb_core saa7146 ttpci_eeprom arc4 ecb crypto_blkcipher snd_hda_intel snd_seq_dummy snd_aw2 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm snd_timer firewire_ohci firewire_core snd_hwdep snd crc_itu_t floppy sr_mod pcspkr k8temp p54pci p54common i2c_nforce2 mac80211 cfg80211 snd_page_alloc soundcore cdrom sg hwmon i2c_core sata_nv dm_snapshot dm_zero dm_mirror dm_log dm_mod ata_generic pata_acpi pata_amd libata sd_mod scsi_mod ext4dev jbd2 mbcache crc16 uhci_hcd ohci_hcd ehci_hcd [last unloaded: forcedeth]
>
>Pid: 0, comm: swapper Tainted: G      D   (2.6.26.3-29.fc9.i686 #1)
>EIP: 0060:[<c0406ee4>] EFLAGS: 00010086 CPU: 1
>EIP is at do_IRQ+0x74/0xc4
>EAX: f7856400 EBX: 00001000 ECX: 00000000 EDX: 00020000
>ESI: 00000007 EDI: 00000380 EBP: f7838d38 ESP: f7838d24
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>Process swapper (pid: 0, ti=f7838000 task=f7856400 task.ti=f7838000)
>Stack: f7838f54 c074a200 f7838f00 00000006 00000002 f7838d80 c04055eb f7838f00 
>       c07fb28c 00000000 00000006 00000002 f7838d80 00000000 0000007b 0000007b 
>       000000d8 fffffff8 c062ec75 00000060 00000246 f7838f00 00000006 f7838d9c 
>Call Trace:
> [<c04055eb>] ? common_interrupt+0x23/0x28
> [<c062ec75>] ? panic+0xbe/0xe4
> [<c0406181>] ? die+0x14d/0x164
> [<c0632b37>] ? do_page_fault+0x62c/0x71e
> [<c043f6b8>] ? clocksource_get_next+0x3c/0x43
> [<c043e897>] ? update_wall_time+0x5bd/0x777
> [<c043f6b8>] ? clocksource_get_next+0x3c/0x43
> [<c043e897>] ? update_wall_time+0x5bd/0x777
> [<c043df54>] ? getnstimeofday+0x3c/0xd6
> [<c043b6e8>] ? hrtimer_forward+0xd1/0xe5
> [<c043df54>] ? getnstimeofday+0x3c/0xd6
> [<c041398b>] ? lapic_next_event+0x15/0x1c
> [<c043df54>] ? getnstimeofday+0x3c/0xd6
> [<c063250b>] ? do_page_fault+0x0/0x71e
> [<c0630f92>] ? error_code+0x72/0x78
> [<c0406ee4>] ? do_IRQ+0x74/0xc4
> [<c0403024>] ? default_idle+0x0/0x58
> [<c04055eb>] ? common_interrupt+0x23/0x28
> [<c0403024>] ? <6>Extended CMOS year: 2000
>default_idle+0x0/0x58
> [<c041963b>] ? native_safe_halt+0x5/0x7
> [<c0403c2b>] ? cpu_idle+0x8f/0xd0
> [<c062c882>] ? start_secondary+0x183/0x18b
> =======================
>Code: 55 ec e8 9e 64 02 00 64 a1 04 b0 79 c0 8b 0c 85 80 21 75 c0 89 e2 81 e2 00 f0 ff ff 39 ca 74 33 8b 02 8d 99 00 10 00 00 8b 52 14 <89> 61 3c 89 01 8b 41 14 81 e2 00 ff 00 00 30 e4 09 c2 89 f0 89 
>EIP: [<c0406ee4>] do_IRQ+0x74/0xc4 SS:ESP 0068:f7838d24
>Kernel panic - not syncing: Fatal exception in interrupt
>Enabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>SMP alternatives: switching to SMP code
>CPU 1 irqstacks, hard=c07c7000 soft=c07a7000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5211.22 BogoMIPS (lpj=2605611)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>kvm: enabling virtualization on CPU1
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>CPU1 is up
>Switched to high resolution mode on CPU 1
>ACPI: Unable to turn cooling device [f781b6a8] 'off'
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [AAZA] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>ata2.01: NODEV after polling detection
>ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
>ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata2: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc700c000) ACPI=0x701f (60:600:0x13)
>ata1.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
>ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>ata1: nv_mode_filter: 0x7f01f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc700c000) ACPI=0x7f01f (15:600:0x13)
>ata2.00: configured for UDMA/33
>ata1.00: configured for UDMA/133
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata5: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata3.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out
>ata3.00: configured for UDMA/133
>sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>firewire_core: skipped bus generations, destroying all nodes
>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>serial 00:09: activated
>sd 0:0:0:0: [sda] Starting disk
>sd 2:0:0:0: [sdb] Starting disk
>PM: writing image.
>firewire_core: created device fw0: GUID 0011d800010537b8, S400
>PM: Free swap pages: 524286
>PM: Saving image data pages (29916 pages) ...       0%  1%  2%  3%  4%  5%  6%  7%  8%  9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21% 22% 23% 24% 25% 26% 27% 28% 29% 30% 31% 32% 33% 34% 35% 36% 37% 38% 39% 40% 41% 42% 43% 44% 45% 46% 47% 48% 49% 50% 51% 52% 53% 54% 55% 56% 57% 58% 59% 60% 61% 62% 63% 64% 65% 66% 67% 68% 69% 70% 71% 72% 73% 74% 75% 76% 77% 78% 79% 80% 81% 82% 83% 84% 85% 86% 87% 88% 89% 90% 91% 92% 93% 94% 95% 96% 97% 98% 99%100%done
>PM: Wrote 119664 kbytes in 2.52 seconds (47.48 MB/s)
>PM: S|
>md: stopping all md devices.
>sd 2:0:0:0: [sdb] Synchronizing SCSI cache
>sd 2:0:0:0: [sdb] Stopping disk
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI: Preparing to enter system sleep state S5
>Disabling non-boot CPUs ...
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>kvm: disabling virtualization on CPU1
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>CPU1 is down
>Power down.
>acpi_power_off called
>Initializing cgroup subsys cpuset
>Linux version 2.6.26.3-29.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:42:27 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007bef0000 (usable)
> BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS)
> BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data)
> BIOS-e820: 000000007c000000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>1086MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at [c00f5ab0] 000f5ab0
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   507632
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   507632
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP 000F7640, 0024 (r2 Nvidia)
>ACPI: XSDT 7BEF3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 7BEF9D80, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 7BEF3280, 6AC0 (r1 NVIDIA ASUSACPI     1000 MSFT  3000000)
>ACPI: FACS 7BEF0000, 0040
>ACPI: SSDT 7BEF9F80, 028A (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: HPET 7BEFA280, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 7BEFA300, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 7BEF9EC0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 40872 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 503666
>Kernel command line: ro root=/dev/VG00/root selinux=0 vga=773 console=tty0 console=tty1 console=ttyS1,115200n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07c6000 soft=c07a6000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Extended CMOS year: 2000
>Detected 2605.417 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>console [ttyS1] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2004612k/2030528k available (2257k kernel code, 24632k reserved, 1152k data, 284k init, 1113024k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc075c000 - 0xc07a3000   ( 284 kB)
>      .data : 0xc0634770 - 0xc0754980   (1152 kB)
>      .text : 0xc0400000 - 0xc0634770   (2257 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 5214.31 BogoMIPS (lpj=2607157)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080321
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>CPU 1 irqstacks, hard=c07c7000 soft=c07a7000
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5210.48 BogoMIPS (lpj=2605243)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (10424.80 BogoMIPS).
>net_namespace: 660 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 10:21:30  Date: 04/01/04
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x4080-0x40ff has been reserved
>system 00:01: ioport range 0x4400-0x447f has been reserved
>system 00:01: ioport range 0x4480-0x44ff has been reserved
>system 00:01: ioport range 0x4800-0x487f has been reserved
>system 00:01: ioport range 0x4880-0x48ff has been reserved
>system 00:01: ioport range 0x2000-0x207f has been reserved
>system 00:01: ioport range 0x2080-0x20ff has been reserved
>system 00:01: iomem range 0x7c000000-0x7fffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0c: iomem range 0xf0000-0xf3fff could not be reserved
>system 00:0c: iomem range 0xf4000-0xf7fff could not be reserved
>system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfefff0ff could not be reserved
>system 00:0c: iomem range 0x7bef0000-0x7befffff could not be reserved
>system 00:0c: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0c: iomem range 0x0-0x9ffff could not be reserved
>system 00:0c: iomem range 0x100000-0x7beeffff could not be reserved
>system 00:0c: iomem range 0x7c000000-0x7fffffff could not be reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0c: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0c: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0c: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0c: iomem range 0xfffed000-0xfffeffff could not be reserved
>PCI: Bridge: 0000:00:10.0
>  IO window: b000-bfff
>  MEM window: 0xfdd00000-0xfddfffff
>  PREFETCH window: 0x00000000fde00000-0x00000000fdefffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3288k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1080814889.902:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1749
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:09.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:00:10.0: Enabling HT MSI Mapping
>pci 0000:00:10.1: Enabling HT MSI Mapping
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 65536k
>vesafb: mode is 1024x768x8, linelength=1024, pages=3
>vesafb: protected mode interface info at c000:d210
>vesafb: pmi: set display start = c00cd246, set palette = c00cd2b0
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: ACPI0007:01 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 0:941:374
>  hash matches drivers/base/power/main.c:192
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel text: 2260k
>Write protecting the kernel read-only data: 940k
>Red Hat nash version 6.0.52 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>LoACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ading ehci-hcd module
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfe02e000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.1
>Loading ohci-hcd module
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>Loading uhci-hcd module
>USB Universal Host Controller Interface driver v3.0
>Loading ext4dev module
>Loading scsi_mod module
>SCSI subsystem initialized
>Loading sd_mod module
>Driver 'sd' needs updating - please use bus_type methods
>Loading libata module
>Loading pata_amd module
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/133
>ata1.00: 78242976 sectors, multi 1: LBA48 
>ata1.00: configured for UDMA/133
>usb 2-3: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input4
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:0b.0-3
>usb 2-3: New USB device found, idVendor=046d, idProduct=c50e
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: USB RECEIVER
>usb 2-3: Manufacturer: Logitech
>ata2.00: ATAPI: BENQ    DVD DD DW1640, BSRB, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: CD-ROM            BENQ     DVD DD DW1640    BSRB PQ: 0 ANSI: 5
>Waiting for driver initialization.
>Loading pata_acpi module
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>ACPI: PCI interrupt for device 0000:00:0f.0 disabled
>Waiting for driver initialization.
>Loading ata_generic module
>Loading dm-mod module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>Loading dm-mirror module
>Loading dm-zero module
>Loading dm-snapshot module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VG00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VG00" now active
>Trying to resume from /dev/VG00/swap
>Resuming from /dPM: Starting manual resume from disk
>ev/VG00/swap.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>PM: Loading image data pages (29916 pages) ...       0%  1%  2%  3%  4%  5%  6%  7%  8%  9% 10% 11% 12% 13% 14% 15% 16% 17% 18% 19% 20% 21% 22% 23% 24% 25% 26% 27% 28% 29% 30% 31% 32% 33% 34% 35% 36% 37% 38% 39% 40% 41% 42% 43% 44% 45% 46% 47% 48% 49% 50% 51% 52% 53% 54% 55% 56% 57% 58% 59% 60% 61% 62% 63% 64% 65% 66% 67% 68% 69% 70% 71% 72% 73% 74% 75% 76% 77% 78% 79% 80% 81% 82% 83% 84% 85% 86% 87% 88% 89% 90% 91% 92% 93% 94% 95% 96% 97% 98% 99%100%done
>PM: Read 119664 kbytes in 3.94 seconds (30.37 MB/s)
>Suspending console(s)

Actions: View

Attachments on bug 461846: 316362