Attachment 316487 Details for Bug 459278 – /var/log/dmesg

/var/log/dmesg

dmesg (text/plain), 13.96 KB, created by Matěj Cepl on 2008-09-11 20:55:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-09-11 20:55:38 UTC

Size: 13.96 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 rhgb quiet)
>Linux version 2.6.18-92.el5xen (brewbuilder@ls20-bc2-13.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Tue Apr 29 13:31:30 EDT 2008
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000038c1f000 (usable)
>On node 0 totalpages: 232479
>  DMA zone: 232479 pages, LIFO batch:31
>DMI present.
>ACPI: RSDP (v002 PTLTD                                 ) @ 0x00000000000f7350
>ACPI: XSDT (v001 PTLTD  	 XSDT   0x00050000  LTP 0x00000000) @ 0x000000003deeb9b5
>ACPI: FADT (v003 FSC       ÷P:, 0x00050000      0x000f4240) @ 0x000000003deeba75
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00050000  LTP 0x00000001) @ 0x000000003deeee72
>ACPI: MADT (v001 PTLTD  	 APIC   0x00050000  LTP 0x00000000) @ 0x000000003deeef48
>ACPI: MCFG (v001 PTLTD    MCFG   0x00050000  LTP 0x00000000) @ 0x000000003deeef98
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x00050000  LTP 0x00000001) @ 0x000000003deeefd8
>ACPI: DSDT (v001 FSC    D2030    0x00050000 MSFT 0x02000002) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Built 1 zonelists.  Total pages: 232479
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2000.090 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: 0xffff8800021f9000 - 0xffff8800023f9000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 887808k/929916k available (2414k kernel code, 33192k reserved, 1349k data, 176k init)
>Calibrating delay using timer specific routine.. 5002.37 BogoMIPS (lpj=10004751)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Brought up 1 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>checking if image is initramfs... it is
>Grant table initialized
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: Device [LPT] status [00000008]: functional but not present; setting present
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: fc100000-fc1fffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1f.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:1f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x69 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1218812227.356:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 6E24E25C96667C37
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>0000:00:03.3 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1f.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1f.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x1
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Unsupported SiS chipset (device id: 0761)
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>GSI 16 sharing vector 0xA0 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
>SIS5513: chipset revision 1
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS965 ATA 133 (2nd gen) controller
>    ide0: BM-DMA at 0x1c80-0x1c87, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1c88-0x1c8f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Pre-initialization of ACPI failed
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x8
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>Write protecting the kernel read-only data: 461k
>input: AT Translated Set 2 keyboard as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>GSI 17 sharing vector 0xA8 and IRQ 17
>ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: irq 17, io mem 0xfc003000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 18 sharing vector 0xB0 and IRQ 18
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 18, io mem 0xfc000000
>input: PS/2 Logitech Mouse as /class/input/input1
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>GSI 19 sharing vector 0xB8 and IRQ 19
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 19, io mem 0xfc001000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>GSI 20 sharing vector 0xC0 and IRQ 20
>ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 20, io mem 0xfc002000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>sata_sis 0000:00:05.0: version 1.0
>GSI 21 sharing vector 0xC8 and IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 21
>sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
>scsi0 : sata_sis
>scsi1 : sata_sis
>ata1: SATA max UDMA/133 cmd 0x1cb0 ctl 0x1ca4 bmdma 0x1c90 irq 21
>ata2: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1ca0 bmdma 0x1c98 irq 21
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: SAMSUNG SP0411C, UU100-05, max UDMA7
>ata1.00: 78242976 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: SAMSUNG SP0411C, UU100-05, max UDMA7
>ata2.00: 78242976 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/133
>  Vendor: ATA       Model: SAMSUNG SP0411C   Rev: UU10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: ATA       Model: SAMSUNG SP0411C   Rev: UU10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 78242976 512-byte hdwr sectors (40060 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 78242976 512-byte hdwr sectors (40060 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>sd 1:0:0:0: Attached scsi disk sdb
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1218812243.401:2): selinux=0 auid=4294967295 ses=4294967295
>hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>GSI 22 sharing vector 0xD0 and IRQ 22
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 22
>eth0: RTL8169s/8110s at 0xffffc2000001e000, 00:30:05:b8:24:4d, IRQ 22
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>EDAC MC: Ver: 2.0.1 Apr 29 2008
>input: PC Speaker as /class/input/input2
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>GSI 23 sharing vector 0xD8 and IRQ 23
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
>intel8x0_measure_ac97_clock: measured 50660 usecs
>intel8x0: clocking to 48000
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1998840k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1998840k

Actions: View

Attachments on bug 459278: 314397 | 316484 | 316485 | 316486 | 316487