Attachment 316841 Details for Bug 462447 – /var/log/dmes

/var/log/dmes

dmesg (text/plain), 45.19 KB, created by Matěj Cepl on 2008-09-16 12:30:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-09-16 12:30:19 UTC

Size: 45.19 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.323.rc6.fc10.x86_64 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.3.2 20080905 (Red Hat 4.3.2-3) (GCC) ) #1 SMP Thu Sep 11 06:07:35 EDT 2008
>Command line: ro root=/dev/vol0/log101
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe86c00 (usable)
> BIOS-e820: 000000007fe86c00 - 000000007fe88c00 (ACPI NVS)
> BIOS-e820: 000000007fe88c00 - 000000007fe8ac00 (ACPI data)
> BIOS-e820: 000000007fe8ac00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>last_pfn = 0x7fe86 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007fe86000 page 4k
>kernel direct mapping tables up to 7fe86000 @ 8000-c000
>last_map_addr: 7fe86000 end: 7fe86000
>RAMDISK: 37c5b000 - 37fef8b8
>DMI 2.3 present.
>ACPI: RSDP 000FEB00, 0024 (r2 DELL  )
>ACPI: XSDT 000FD257, 0074 (r1 DELL    GX620          7 ASL        61)
>ACPI: FACP 000FD34F, 00F4 (r3 DELL    GX620          7 ASL        61)
>ACPI: DSDT FFFD4952, 3DA4 (r1   DELL    dt_ex     1000 INTL 20050309)
>ACPI: FACS 7FE86C00, 0040
>ACPI: SSDT FFFD8815, 00AA (r1   DELL    st_ex     1000 INTL 20050309)
>ACPI: APIC 000FD443, 0072 (r1 DELL    GX620          7 ASL        61)
>ACPI: BOOT 000FD4B5, 0028 (r1 DELL    GX620          7 ASL        61)
>ACPI: ASF! 000FD4DD, 0067 (r16 DELL    GX620          7 ASL        61)
>ACPI: MCFG 000FD544, 003E (r1 DELL    GX620          7 ASL        61)
>ACPI: HPET 000FD582, 0038 (r1 DELL    GX620          7 ASL        61)
>ACPI: SSDT 7FE86C40, 0175 (r1 DpgPmm  Cpu0Ist       11 INTL 20050309)
>ACPI: SSDT 7FE87049, 0175 (r1 DpgPmm  Cpu1Ist       11 INTL 20050309)
>ACPI: SSDT 7FE87452, 0140 (r1 DpgPmm    CpuPm       10 INTL 20050309)
>ACPI: DMI detected: Dell OptiPlex GX620
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fe86000
>Bootmem setup node 0 0000000000000000-000000007fe86000
>  NODE_DATA [000000000000a000 - 0000000000021fff]
>  bootmap [0000000000022000 -  0000000000031fd7] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007fe86000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0001520008]    TEXT DATA BSS ==> [0000200000 - 0001520008]
>  #3 [0037c5b000 - 0037fef8b8]          RAMDISK ==> [0037c5b000 - 0037fef8b8]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>found SMP MP-table at [ffff8800000fe710] 000fe710
> [ffffe20000000000-ffffe20002ffffff] PMD -> [ffff880001800000-ffff8800047fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x000000a0
>    0: 0x00000100 -> 0x0007fe86
>On node 0 totalpages: 523814
>  DMA zone: 3801 pages, LIFO batch:0
>  DMA32 zone: 507630 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 1647392 bytes of per cpu data
>NR_CPUS: 512, nr_cpu_ids: 4, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 511431
>Policy zone: DMA32
>Kernel command line: ro root=/dev/vol0/log101
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2992.547 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 4095 kB
> per task-struct memory footprint: 2688 bytes
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2015992k/2095640k available (3245k kernel code, 79264k reserved, 1836k data, 2776k init)
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.09 BogoMIPS (lpj=2992547)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0:               Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
>Using local APIC timer interrupts.
>APIC timer calibration result 12468943
>Detected 12.468 MHz APIC timer.
>lockdep: fixing up alternatives.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5984.81 BogoMIPS (lpj=2992408)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1:               Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (11969.91 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=96 bytes
>sizeof(inode)=1088 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1488 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=8832 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>khelper used greatest stack depth: 5680 bytes left
>net_namespace: 1680 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 17:35:05  Date: 09/15/08
>NET: Registered protocol family 16
>khelper used greatest stack depth: 4984 bytes left
>No dock devices found.
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub without MMCONFIG support.
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:01:00.1: supports D1
>pci 0000:01:00.1: supports D2
>PCI: bridge 0000:00:01.0 io port: [d000, dfff]
>PCI: bridge 0000:00:01.0 32bit mmio: [fe900000, feafffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>PCI: bridge 0000:00:1c.0 32bit mmio: [fe800000, fe8fffff]
>PCI: bridge 0000:00:1c.1 32bit mmio: [fe700000, fe7fffff]
>pci 0000:00:1e.0: transparent bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
>pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>tracer: 1286 pages allocated for 65536 entries of 80 bytes
>   actual entries 65586
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0xc00-0xc7f has been reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0x100000-0xffffff could not be reserved
>system 00:09: iomem range 0x1000000-0x7fe86bff could not be reserved
>system 00:09: iomem range 0xf0000-0xfffff could not be reserved
>system 00:09: iomem range 0xc0000-0xcffff has been reserved
>system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:09: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:09: iomem range 0xffb00000-0xffbfffff could not be reserved
>system 00:09: iomem range 0xffc00000-0xffffffff could not be reserved
>system 00:0a: ioport range 0x100-0x1fe could not be reserved
>system 00:0a: ioport range 0x200-0x277 has been reserved
>system 00:0a: ioport range 0x280-0x2e7 has been reserved
>system 00:0a: ioport range 0x2f0-0x2f7 has been reserved
>system 00:0a: ioport range 0x300-0x377 could not be reserved
>system 00:0a: ioport range 0x380-0x3bb has been reserved
>system 00:0a: ioport range 0x3c0-0x3e7 could not be reserved
>system 00:0a: ioport range 0x3f6-0x3f7 could not be reserved
>system 00:0a: ioport range 0x400-0x4cf has been reserved
>system 00:0a: ioport range 0x4d2-0x57f has been reserved
>system 00:0a: ioport range 0x580-0x677 has been reserved
>system 00:0a: ioport range 0x680-0x777 has been reserved
>system 00:0a: ioport range 0x780-0x7bb has been reserved
>system 00:0a: ioport range 0x7c0-0x7ff has been reserved
>system 00:0a: ioport range 0x8e0-0x8ff has been reserved
>system 00:0a: ioport range 0x900-0x9fe has been reserved
>system 00:0a: ioport range 0xa00-0xafe has been reserved
>system 00:0a: ioport range 0xb00-0xbfe has been reserved
>system 00:0a: ioport range 0xc80-0xcaf has been reserved
>system 00:0a: ioport range 0xcb0-0xcbf has been reserved
>system 00:0a: ioport range 0xcc0-0xcf7 has been reserved
>system 00:0a: ioport range 0xd00-0xdfe has been reserved
>system 00:0a: ioport range 0xe00-0xefe has been reserved
>system 00:0a: ioport range 0xf00-0xffe has been reserved
>system 00:0a: ioport range 0x2000-0x20fe has been reserved
>system 00:0a: ioport range 0x2100-0x21fe has been reserved
>system 00:0a: ioport range 0x2200-0x22fe has been reserved
>system 00:0a: ioport range 0x2300-0x23fe has been reserved
>system 00:0a: ioport range 0x2400-0x24fe has been reserved
>system 00:0a: ioport range 0x2500-0x25fe has been reserved
>system 00:0a: ioport range 0x2600-0x26fe has been reserved
>system 00:0a: ioport range 0x2700-0x27fe has been reserved
>system 00:0a: ioport range 0x2800-0x28fe has been reserved
>system 00:0a: ioport range 0x2900-0x29fe has been reserved
>system 00:0a: ioport range 0x2a00-0x2afe has been reserved
>system 00:0a: ioport range 0x2b00-0x2bfe has been reserved
>system 00:0a: ioport range 0x2c00-0x2cfe has been reserved
>system 00:0a: ioport range 0x2d00-0x2dfe has been reserved
>system 00:0a: ioport range 0x2e00-0x2efe has been reserved
>system 00:0a: ioport range 0x2f00-0x2ffe has been reserved
>system 00:0a: ioport range 0x5000-0x50fe has been reserved
>system 00:0a: ioport range 0x5100-0x51fe has been reserved
>system 00:0a: ioport range 0x5200-0x52fe has been reserved
>system 00:0a: ioport range 0x5300-0x53fe has been reserved
>system 00:0a: ioport range 0x5400-0x54fe has been reserved
>system 00:0a: ioport range 0x5500-0x55fe has been reserved
>system 00:0a: ioport range 0x5600-0x56fe has been reserved
>system 00:0a: ioport range 0x5700-0x57fe has been reserved
>system 00:0a: ioport range 0x5800-0x58fe has been reserved
>system 00:0a: ioport range 0x5900-0x59fe has been reserved
>system 00:0a: ioport range 0x5a00-0x5afe has been reserved
>system 00:0a: ioport range 0x5b00-0x5bfe has been reserved
>system 00:0a: ioport range 0x5c00-0x5cfe has been reserved
>system 00:0a: ioport range 0x5d00-0x5dfe has been reserved
>system 00:0a: ioport range 0x5e00-0x5efe has been reserved
>system 00:0a: ioport range 0x5f00-0x5ffe has been reserved
>system 00:0a: ioport range 0x6000-0x60fe has been reserved
>system 00:0a: ioport range 0x6100-0x61fe has been reserved
>system 00:0a: ioport range 0x6200-0x62fe has been reserved
>system 00:0a: ioport range 0x6300-0x63fe has been reserved
>system 00:0a: ioport range 0x6400-0x64fe has been reserved
>system 00:0a: ioport range 0x6500-0x65fe has been reserved
>system 00:0a: ioport range 0x6600-0x66fe has been reserved
>system 00:0a: ioport range 0x6700-0x67fe has been reserved
>system 00:0a: ioport range 0x6800-0x68fe has been reserved
>system 00:0a: ioport range 0x6900-0x69fe has been reserved
>system 00:0a: ioport range 0x6a00-0x6afe has been reserved
>system 00:0a: ioport range 0x6b00-0x6bfe has been reserved
>system 00:0a: ioport range 0x6c00-0x6cfe has been reserved
>system 00:0a: ioport range 0x6d00-0x6dfe has been reserved
>system 00:0a: ioport range 0x6e00-0x6efe has been reserved
>system 00:0a: ioport range 0x6f00-0x6ffe has been reserved
>system 00:0a: ioport range 0xa000-0xa0fe has been reserved
>system 00:0a: ioport range 0xa100-0xa1fe has been reserved
>system 00:0a: ioport range 0xa200-0xa2fe has been reserved
>system 00:0a: ioport range 0xa300-0xa3fe has been reserved
>system 00:0a: ioport range 0xa400-0xa4fe has been reserved
>system 00:0a: ioport range 0xa500-0xa5fe has been reserved
>system 00:0a: ioport range 0xa600-0xa6fe has been reserved
>system 00:0a: ioport range 0xa700-0xa7fe has been reserved
>system 00:0a: ioport range 0xa800-0xa8fe has been reserved
>system 00:0a: ioport range 0xa900-0xa9fe has been reserved
>system 00:0a: ioport range 0xaa00-0xaafe has been reserved
>system 00:0a: ioport range 0xab00-0xabfe has been reserved
>system 00:0a: ioport range 0xac00-0xacfe has been reserved
>system 00:0a: ioport range 0xad00-0xadfe has been reserved
>system 00:0a: ioport range 0xae00-0xaefe has been reserved
>system 00:0a: ioport range 0xaf00-0xaffe has been reserved
>system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
>system 00:0a: iomem range 0xfeda0000-0xfedacfff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xd000-0xdfff
>pci 0000:00:01.0:   MEM window: 0xfe900000-0xfeafffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xfe800000-0xfe8fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: 0xfe700000-0xfe7fffff
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [d000, dfff]
>bus: 01 index 1 mmio: [fe900000, feafffff]
>bus: 01 index 2 mmio: [e0000000, efffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [fe800000, fe8fffff]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [fe700000, fe7fffff]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [0, 0]
>bus: 04 index 3 io port: [0, ffff]
>bus: 04 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>debug: unmapping init memory ffff880037c5b000..ffff880037ff0000
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1221500106.423:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3937
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1020
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0081
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0081
>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0081
>pci 0000:00:1d.3: Performing full reset
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [VBTN]
>processor ACPI0007:00: registered as cooling_device0
>processor ACPI0007:01: registered as cooling_device1
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 3: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 5: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 6: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 8 chg 0068 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 3 low speed --> companion
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.323.rc6.fc10.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:1d.7: port 5 low speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 5 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.323.rc6.fc10.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 6 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>usb 1-6: new high speed USB device using ehci_hcd and address 4
>uhci_hcd 0000:00:1d.1: port 1 portsc 01ab,00
>hub 3-0:1.0: port 1: status 0301 change 0003
>ehci_hcd 0000:00:1d.7: port 6 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.323.rc6.fc10.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>usb 1-6: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>usb 1-6: usb_probe_device
>usb 1-6: configuration #1 chosen from 1 choice
>usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>usb 1-6:1.0: uevent
>hub 1-6:1.0: usb_probe_interface
>hub 1-6:1.0: usb_probe_interface - got id
>hub 1-6:1.0: USB hub found
>hub 1-6:1.0: 4 ports detected
>hub 1-6:1.0: standalone hub
>hub 1-6:1.0: individual port power switching
>hub 1-6:1.0: individual port over-current protection
>hub 1-6:1.0: TT per port
>hub 1-6:1.0: TT requires at most 8 FS bit times (666 ns)
>hub 1-6:1.0: Port indicators are supported
>hub 1-6:1.0: power on to power good time: 100ms
>hub 1-6:1.0: local power source is good
>hub 1-6:1.0: enabling power on all ports
>uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00
>hub 4-0:1.0: port 1: status 0301 change 0003
>uhci_hcd 0000:00:1d.2: port 2 portsc 0082,00
>hub 1-6:1.0: port 3: status 0101 change 0001
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.323.rc6.fc10.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>usb 1-6: link qh256-0001/ffff88007b0f9140 start 255 [1/0 us]
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb 1-6: New USB device found, idVendor=0424, idProduct=2504
>usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb usb5: default language 0x0409
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0020
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.323.rc6.fc10.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: default language 0x0409
>usb 3-1: uevent
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>usb 3-1:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 3-1: New USB device found, idVendor=413c, idProduct=2003
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: Dell USB Keyboard
>usb 3-1: Manufacturer: Dell
>hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>usb 4-1: skipped 1 descriptor after interface
>usb 4-1: default language 0x0409
>usb 4-1: uevent
>usb 4-1: usb_probe_device
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>usb 4-1:1.0: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 4-1: New USB device found, idVendor=046d, idProduct=c016
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: Optical USB Mouse
>usb 4-1: Manufacturer: Logitech
>hub 1-6:1.0: state 7 ports 4 chg 0008 evt 0000
>hub 1-6:1.0: port 3, status 0101, change 0000, 12 Mb/s
>hub 1-6:1.0: port 3 not reset yet, waiting 10ms
>usb 1-6.3: new full speed USB device using ehci_hcd and address 5
>hub 1-6:1.0: port 3 not reset yet, waiting 10ms
>usb 1-6.3: ep0 maxpacket = 8
>usb 1-6.3: skipped 10 descriptors after interface
>usb 1-6.3: skipped 2 descriptors after interface
>usb 1-6.3: skipped 1 descriptor after endpoint
>usb 1-6.3: skipped 2 descriptors after interface
>usb 1-6.3: skipped 1 descriptor after endpoint
>usb 1-6.3: skipped 2 descriptors after interface
>usb 1-6.3: skipped 1 descriptor after endpoint
>usb 1-6.3: skipped 1 descriptor after interface
>usb 1-6.3: default language 0x0409
>usb 1-6.3: uevent
>usb 1-6.3: usb_probe_device
>usb 1-6.3: configuration #1 chosen from 1 choice
>usb 1-6.3: adding 1-6.3:1.0 (config #1, interface 0)
>usb 1-6.3:1.0: uevent
>usb 1-6.3: adding 1-6.3:1.1 (config #1, interface 1)
>usb 1-6.3:1.1: uevent
>usb 1-6.3: adding 1-6.3:1.2 (config #1, interface 2)
>usb 1-6.3:1.2: uevent
>usb 1-6.3: adding 1-6.3:1.3 (config #1, interface 3)
>usb 1-6.3:1.3: uevent
>drivers/usb/core/inode.c: creating file '005'
>usb 1-6.3: New USB device found, idVendor=046d, idProduct=0a0c
>usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-6.3: Product: Logitech USB Headset
>usb 1-6.3: Manufacturer: Logitech
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usbcore: registered new interface driver hiddev
>usbhid 3-1:1.0: usb_probe_interface
>usbhid 3-1:1.0: usb_probe_interface - got id
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
>uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 16, phase 8, 118 us
>input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-1
>usbhid 4-1:1.0: usb_probe_interface
>usbhid 4-1:1.0: usb_probe_interface - got id
>input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input4
>input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.2-1
>usbhid 1-6.3:1.3: usb_probe_interface
>usbhid 1-6.3:1.3: usb_probe_interface - got id
>input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.3/1-6.3:1.3/input/input5
>usb usb2: suspend_rh (auto-stop)
>usb 1-6.3: link qh8-0e01/ffff88007b0f9280 start 7 [1/2 us]
>input,hidraw2: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.7-6.3
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:976:592
>debug: unmapping init memory ffffffff8176b000..ffffffff81a21000
>Write protecting the kernel read-only data: 1444k
>plymouthd used greatest stack depth: 4736 bytes left
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:01:00.0: setting latency timer to 64
>[drm] Detected VRAM RAM=262144K, accessible=262144K, BAR=262144K
>[drm] DFP table revision: 4
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:01:00.0: DVI-I-1: no EDID data
>usb usb5: suspend_rh (auto-stop)
>allocated ffff88007ac3e000 1280x1024 fb: 0x00048000, bo ffff88007aff0770
>Console: switching to colour frame buffer device 160x64
>[drm] DAC-9: set mode 1280x1024 15
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Loading R300 Microcode
>[drm] Num pipes: 1
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>modprobe used greatest stack depth: 4616 bytes left
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>ata_piix 0000:00:1f.1: version 2.12
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata1.00: ATAPI: Optiarc DVD+/-RW ND-3570A, 104B, max UDMA/33
>ata1.00: configured for UDMA/33
>ata2: port disabled. ignoring.
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: CD-ROM            Optiarc  DVD+-RW ND-3570A 104B PQ: 0 ANSI: 5
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
>ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
>ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
>ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ/ ZM10 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>modprobe used greatest stack depth: 2424 bytes left
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 171624 rules.
>SELinux: 8192 avtab hash slots, 171624 rules.
>SELinux:  8 users, 12 roles, 2299 types, 115 bools, 1 sens, 1024 cats
>SELinux:  72 classes, 171624 rules
>SELinux:  permission open in class dir not defined in policy
>SELinux:  permission open in class file not defined in policy
>SELinux:  permission open in class chr_file not defined in policy
>SELinux:  permission open in class blk_file not defined in policy
>SELinux:  permission open in class fifo_file not defined in policy
>SELinux: the above unknown classes and permissions will be allowed
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1221500120.398:2): policy loaded auid=4294967295 ses=4294967295
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb 3-1: uevent
>usb 3-1:1.0: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb 4-1: uevent
>usb 4-1:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-6: uevent
>usb 1-6.3: uevent
>usb 1-6.3:1.0: uevent
>usb 1-6.3:1.1: uevent
>usb 1-6.3:1.2: uevent
>usb 1-6.3:1.3: uevent
>usb 1-6:1.0: uevent
>tg3.c:v3.94 (August 14, 2008)
>tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:00.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:13:72:a8:c0:e1
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>iTCO_vendor_support: vendor-support=0
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>input: PC Speaker as /devices/platform/pcspkr/input/input6
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>ppdev: user-space parallel port driver
>snd-usb-audio 1-6.3:1.0: usb_probe_interface
>snd-usb-audio 1-6.3:1.0: usb_probe_interface - got id
>ALSA sound/usb/usbaudio.c:2812: 5:1:1: add audio endpoint 0x1
>ALSA sound/usb/usbaudio.c:2812: 5:1:2: add audio endpoint 0x1
>ALSA sound/usb/usbaudio.c:2812: 5:2:1: add audio endpoint 0x84
>ALSA sound/usb/usbmixer.c:988: [6] FU [Mic Playback Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:405: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x600, type = 4, data = 0x80/0x0
>ALSA sound/usb/usbmixer.c:988: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/256
>ALSA sound/usb/usbmixer.c:988: [1] FU [Speaker Playback Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:405: cannot set ctl value: req = 0x4, wValue = 0x201, wIndex = 0x100, type = 4, data = 0x80/0x0
>ALSA sound/usb/usbmixer.c:988: [1] FU [Speaker Playback Volume] ch = 2, val = -10496/768/256
>ALSA sound/usb/usbmixer.c:988: [2] FU [Mic Capture Switch] ch = 1, val = 0/1/1
>ALSA sound/usb/usbmixer.c:405: cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x200, type = 4, data = 0x80/0x0
>ALSA sound/usb/usbmixer.c:988: [2] FU [Mic Capture Volume] ch = 1, val = 4096/7424/256
>usbcore: registered new interface driver snd-usb-audio
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>ALSA sound/pci/ac97/ac97_codec.c:2122: AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50813 usecs
>intel8x0: measured clock 216 rejected
>intel8x0: clocking to 48000
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald2 starting.  Commit interval 5 seconds
>EXT4 FS on dm-7, internal journal
>EXT4-fs: mounted filesystem with ordered data mode.
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>SELinux: initialized (dev dm-7, type ext4dev), uses xattr
>Adding 1015800k swap on /dev/mapper/vol0-log1swp.  Priority:-1 extents:1 across:1015800k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 462447: 316840 | 316841 | 316842 | 319208