Attachment 317494 Details for Bug 462919 – here is the dmesg output after booting the new kernel

here is the dmesg output after booting the new kernel

dmesg.txt (text/plain), 30.24 KB, created by Maxime Bellengé on 2008-09-23 17:08:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Maxime Bellengé

Created: 2008-09-23 17:08:39 UTC

Size: 30.24 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.26.3-29.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:16:37 EDT 2008
>Command line: ro root=UUID=372d6a1f-fc74-4f09-87d6-d673f93c975a rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
> BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 25600 used
>Entering add_active_range(0, 256, 262128) 1 entries of 25600 used
>max_pfn_mapped = 1048576
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>DMI 2.3 present.
>ACPI: RSDP 000F7D30, 0014 (r0 Nvidia)
>ACPI: RSDT 3FFF3040, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3FFF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3FFF3180, 6678 (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3FFF0000, 0040
>ACPI: SSDT 3FFF9900, 00F7 (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: SRAT 3FFF9A40, 0090 (r1 AMD    HAMMER          1 AMD         1)
>ACPI: MCFG 3FFF9B40, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3FFF9840, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
>SRAT: PXM 0 -> APIC 0 -> Node 0
>SRAT: Node 0 PXM 0 0-a0000
>Entering add_active_range(0, 0, 157) 0 entries of 25600 used
>SRAT: Node 0 PXM 0 100000-40000000
>Entering add_active_range(0, 256, 262128) 1 entries of 25600 used
>NUMA: Allocated memnodemap from b000 - b880
>NUMA: Using 20 for the hash shift.
>Bootmem setup node 0 0000000000000000-000000003fff0000
>  NODE_DATA [000000000000b880 - 000000000002087f]
>  bootmap [0000000000021000 -  0000000000028fff] pages 8
>  early res: 0 [0-fff] BIOS data page
>  early res: 1 [6000-7fff] TRAMPOLINE
>  early res: 2 [200000-84a54b] TEXT DATA BSS
>  early res: 3 [37d0b000-37fefc39] RAMDISK
>  early res: 4 [9d000-fffff] BIOS reserved
>  early res: 5 [8000-afff] PGTABLE
>  early res: 6 [b000-b87f] MEMNODEMAP
> [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   262128
>On node 0 totalpages: 262029
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1717 pages reserved
>  DMA zone: 2224 pages, LIFO batch:0
>  DMA32 zone: 3528 pages used for memmap
>  DMA32 zone: 254504 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 45104 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 256728
>Policy zone: DMA32
>Kernel command line: ro root=UUID=372d6a1f-fc74-4f09-87d6-d673f93c975a rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>time.c: Detected 2211.333 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ c29a000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Memory: 1023976k/1048512k available (2699k kernel code, 24140k reserved, 1485k data, 980k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 4424.21 BogoMIPS (lpj=2212108)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>ACPI: Core revision 20080321
>CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
>Using local APIC timer interrupts.
>APIC timer calibration result 12564393
>Detected 12.564 MHz APIC timer.
>Brought up 1 CPUs
>Total of 1 processors activated (4424.21 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5792 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>net_namespace: 1224 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 16:59:21  Date: 09/23/08
>NET: Registered protocol family 16
>No dock devices found.
>node 0 link 0: io port [1000, fffff]
>TOM: 0000000040000000 aka 1024M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [feb00000, fec0ffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [40000000, fed3ffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [40000000, fcffffffff]
>bus: 00 index 2 mmio: [feb00000, fec0ffff]
>bus: 00 index 3 mmio: [a0000, bffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>system 00:01: ioport range 0x4000-0x407f has been reserved
>system 00:01: ioport range 0x4080-0x40ff has been reserved
>system 00:01: ioport range 0x4400-0x447f has been reserved
>system 00:01: ioport range 0x4480-0x44ff has been reserved
>system 00:01: ioport range 0x4800-0x487f has been reserved
>system 00:01: ioport range 0x4880-0x48ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:0e: iomem range 0xdac00-0xdbfff has been reserved
>system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0e: iomem range 0x3fff0000-0x3fffffff could not be reserved
>system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
>system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
>system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
>system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: a000-afff
>  MEM window: 0xd8000000-0xddffffff
>  PREFETCH window: 0x0000000050000000-0x00000000500fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: 0xd0000000-0xd7ffffff
>  PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 2963k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1222189161.447:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 2005
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Found enabled HT MSI Mapping
>pci 0000:00:0b.0: Linking AER extended capability
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Found enabled HT MSI Mapping
>pci 0000:00:0c.0: Linking AER extended capability
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Found enabled HT MSI Mapping
>pci 0000:00:0d.0: Linking AER extended capability
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Found enabled HT MSI Mapping
>pci 0000:00:0e.0: Linking AER extended capability
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>Allocate Port Service[0000:00:0b.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>Allocate Port Service[0000:00:0c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>Allocate Port Service[0000:00:0d.0:pcie03]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>Allocate Port Service[0000:00:0e.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Switched to high resolution mode on CPU 0
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:885:995
>Freeing unused kernel memory: 980k freed
>Write protecting the kernel read-only data: 3848k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 22, io mem 0xde003000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>sata_nv 0000:00:07.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
>usb 2-10: new low speed USB device using ohci_hcd and address 2
>usb 2-10: configuration #1 chosen from 1 choice
>input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input4
>input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:02.0-10
>usb 2-10: New USB device found, idVendor=046d, idProduct=c50e
>usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-10: Product: USB RECEIVER
>usb 2-10: Manufacturer: Logitech
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>ata2: SATA link down (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
> sda: p3 exceeds device capacity
>sd 0:0:0:0: [sda] Attached SCSI disk
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: WDC WD2500JS-22MHB0, 02.01C03, max UDMA/133
>ata3.00: 488397168 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/133
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-6: WDC WD1200JB-00EVA0, 15.05R15, max UDMA/100
>ata4.00: 234441648 sectors, multi 1: LBA48 
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/100
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JS-22M 02.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: unknown partition table
>sd 2:0:0:0: [sdb] Attached SCSI disk
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD1200JB-00E 15.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdc] 234441648 512-byte hardware sectors (120034 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc4 < sdc5 >
>sd 3:0:0:0: [sdc] Attached SCSI disk
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 171554 rules.
>SELinux: 8192 avtab hash slots, 171554 rules.
>SELinux:  8 users, 12 roles, 2379 types, 117 bools, 1 sens, 1024 cats
>SELinux:  72 classes, 171554 rules
>SELinux:  permission open in class dir not defined in policy
>SELinux:  permission open in class file not defined in policy
>SELinux:  permission open in class chr_file not defined in policy
>SELinux:  permission open in class blk_file not defined in policy
>SELinux:  permission open in class fifo_file not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1222189169.195:2): policy loaded auid=4294967295 ses=4294967295
>pata_amd 0000:00:06.0: version 0.3.10
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>scsi4 : pata_amd
>scsi5 : pata_amd
>ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>ata5.00: ATAPI: PHILIPS SPD2414T, P1.0, max UDMA/66
>ata5: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
>ata5.00: limited to UDMA/33 due to 40-wire cable
>ata5.00: configured for UDMA/33
>scsi 4:0:0:0: CD-ROM            PHILIPS  SPD2414T         P1.0 PQ: 0 ANSI: 5
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>scsi 4:0:0:0: Attached scsi generic sg3 type 5
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>Linux video capture interface: v2.00
>cx2388x alsa driver version 0.0.6 loaded
>cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
>cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 9, addr 00:15:f2:35:32:b0
>forcedeth 0000:00:0a.0: highdma csum timirq gbit lnktim desc-v3
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>skge 1.13 addr 0xdd004000 irq 17 chip Yukon-Lite rev 9
>skge eth1: addr 00:15:f2:35:48:28
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:05:06.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>cx88[0]: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40,autodetected]
>cx88[0]: TV tuner type 63, Radio tuner type -1
>input: PC Speaker as /devices/platform/pcspkr/input/input5
>tuner' 2-0043: chip found @ 0x86 (cx88[0])
>tda9887 2-0043: creating new instance
>tda9887 2-0043: tda988[5/6/7] found
>tuner' 2-0061: chip found @ 0xc2 (cx88[0])
>tuner' 2-0063: chip found @ 0xc6 (cx88[0])
>tveeprom 2-0050: Hauppauge model 94009, rev C2A0, serial# 314915
>tveeprom 2-0050: MAC address is 00-0D-FE-04-CE-23
>tveeprom 2-0050: tuner model is Philips FMD1216ME (idx 100, type 63)
>tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
>tveeprom 2-0050: audio processor is CX882 (idx 33)
>tveeprom 2-0050: decoder processor is CX882 (idx 25)
>tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter
>cx88[0]: hauppauge eeprom: model=94009
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>tuner-simple 2-0061: creating new instance
>tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
>input: cx88 IR (Hauppauge WinTV-HVR110 as /devices/pci0000:00/0000:00:09.0/0000:05:06.0/input/input6
>cx88[0]/0: found at 0000:05:06.0, rev: 5, irq: 16, latency: 32, mmio: 0xd8000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88[0]/0: registered device radio0
>ACPI: PCI Interrupt 0000:05:06.1[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt 0000:05:06.2[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>cx88[0]/2: found at 0000:05:06.2, rev: 5, irq: 16, latency: 32, mmio: 0xda000000
>ACPI: PCI Interrupt 0000:05:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
>Audiowerk 2 sound card (saa7146 chipset) detected and managed
>gameport: EMU10K1 is pci0000:05:08.1/gameport0, io 0xa400, speed 1205kHz
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:05:08.2[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:05:08.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:05:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 905kHz
>cx88/2: cx2388x dvb driver version 0.0.6 loaded
>cx88/2: registering cx8802 driver, type: dvb access: shared
>cx88[0]/2: subsystem: 0070:9402, board: Hauppauge WinTV-HVR1100 DVB-T/Hybrid [card=40]
>cx88[0]/2: cx2388x based DVB/ATSC card
>tuner-simple 2-0061: attaching existing instance
>tuner-simple 2-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
>DVB: registering new adapter (cx88[0])
>DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
>saa7146: register extension 'budget_ci dvb'.
>firewire_core: created device fw0: GUID 00023c0031048ad6, S400
>firewire_core: created device fw1: GUID 0011d8000075ac40, S400
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>ppdev: user-space parallel port driver
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2096472k swap on /dev/mapper/nvidia_ghhdhbbcp2.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x6
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x8
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Marking TSC unstable due to cpufreq changes
>Clocksource tsc unstable (delta = -66561083 ns)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>eth0: no link during initialization.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth1: enabling interface
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>skge eth1: Link is up at 100 Mbps, full duplex, flow control none
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 462919: 317494 | 317724