Attachment 317594 Details for Bug 463747 – Xorg.0.log

Xorg.0.log

Xorg.0.log (text/plain), 23.77 KB, created by James Laska on 2008-09-24 14:46:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Laska

Created: 2008-09-24 14:46:32 UTC

Size: 23.77 KB

patch

obsolete

>
>X.Org X Server 1.5.0
>Release Date: 
>X Protocol Version 11, Revision 0
>Build Operating System: Linux 2.6.18-92.1.10.el5 i686 
>Current Operating System: Linux localhost 2.6.27-0.329.rc6.git2.fc10.i686 #1 SMP Mon Sep 15 19:33:33 EDT 2008 i686
>Build Date: 11 September 2008  02:39:57PM
>Build ID: xorg-x11-server 1.5.0-6.fc10 
>	Before reporting problems, check http://wiki.x.org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 24 05:39:42 2008
>(EE) Unable to locate/open config file
>(II) Loader magic: 0x81f3540
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.4
>	X.Org Video Driver: 4.1
>	X.Org XInput driver : 2.1
>	X.Org Server Extension : 1.1
>	X.Org Font Renderer : 0.6
>(II) Loader running on linux
>(--) using VT number 7
>
>(--) PCI:*(0@0:2:0) Intel Corporation Eaglelake Integrated Graphics Controller rev 3, Mem @ 0xfe400000/0, 0xd0000000/0, I/O @ 0x0000dc00/0
>(--) PCI: (0@0:2:1) Intel Corporation Eaglelake Integrated Graphics Controller rev 3, Mem @ 0xfe900000/0
>(==) Matched intel for the autoconfigured driver
>New driver is "intel"
>(==) Using default built-in configuration (30 lines)
>(==) --- Start of built-in configuration ---
>	Section "Device"
>		Identifier	"Builtin Default intel Device 0"
>		Driver	"intel"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default intel Screen 0"
>		Device	"Builtin Default intel Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default fbdev Device 0"
>		Driver	"fbdev"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default fbdev Screen 0"
>		Device	"Builtin Default fbdev Device 0"
>	EndSection
>	Section "Device"
>		Identifier	"Builtin Default vesa Device 0"
>		Driver	"vesa"
>	EndSection
>	Section "Screen"
>		Identifier	"Builtin Default vesa Screen 0"
>		Device	"Builtin Default vesa Device 0"
>	EndSection
>	Section "ServerLayout"
>		Identifier	"Builtin Default Layout"
>		Screen	"Builtin Default intel Screen 0"
>		Screen	"Builtin Default fbdev Screen 0"
>		Screen	"Builtin Default vesa Screen 0"
>	EndSection
>(==) --- End of built-in configuration ---
>(==) ServerLayout "Builtin Default Layout"
>(**) |-->Screen "Builtin Default intel Screen 0" (0)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default intel Device 0"
>(==) No monitor specified for screen "Builtin Default intel Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default fbdev Device 0"
>(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
>	Using a default monitor configuration.
>(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>(**) |   |-->Monitor "<default monitor>"
>(**) |   |-->Device "Builtin Default vesa Device 0"
>(==) No monitor specified for screen "Builtin Default vesa Screen 0".
>	Using a default monitor configuration.
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(==) No FontPath specified.  Using compiled-in default.
>(==) FontPath set to:
>	catalogue:/etc/X11/fontpath.d,
>	built-ins
>(==) ModulePath set to "/usr/lib/xorg/modules"
>(II) Cannot locate a core pointer device.
>(II) Cannot locate a core keyboard device.
>(II) The server relies on HAL to provide the list of input devices.
>	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
>(II) Open ACPI successful (/var/run/acpid.socket)
>(II) System resource ranges:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(II) LoadModule: "extmod"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension SELinux
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "dbe"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "glx"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(==) AIGLX enabled
>(==) Exporting typical set of GLX visuals
>(II) Loading extension GLX
>(II) LoadModule: "freetype"
>
>(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.5.0, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.6
>(II) Loading font FreeType
>(II) LoadModule: "dri"
>
>(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 1.1
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "intel"
>
>(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
>(II) Module intel: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 2.5.96
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.1
>(II) LoadModule: "fbdev"
>
>(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
>(II) Module fbdev: vendor="X.Org Foundation"
>	compiled for 1.4.99.2, module version = 0.3.1
>	ABI class: X.Org Video Driver, version 4.0
>(II) LoadModule: "vesa"
>
>(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(II) Module vesa: vendor="X.Org Foundation"
>	compiled for 1.4.99.905, module version = 1.3.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
>	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
>	965GM, 965GME/GLE, G33, Q35, Q33,
>	Mobile IntelÂ® GM45 Express Chipset,
>	Intel Integrated Graphics Device, G45/G43, Q45/Q43
>(II) FBDEV: driver for framebuffer: fbdev
>(II) VESA: driver for VESA chipsets: vesa
>(II) Primary Device is: PCI 00@00:02:0
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>(WW) Falling back to old probe method for fbdev
>(II) Loading sub module "fbdevhw"
>(II) LoadModule: "fbdevhw"
>
>(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
>(II) Module fbdevhw: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 0.0.2
>	ABI class: X.Org Video Driver, version 4.1
>(EE) open /dev/fb0: No such file or directory
>(WW) Falling back to old probe method for vesa
>(II) resource ranges after probing:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Loading /usr/lib/xorg/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>
>(II) Loading /usr/lib/xorg/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) intel(0): Creating default Display subsection in Screen section
>	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
>(==) intel(0): Depth 24, (==) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) Intel Integrated Graphics Device
>(--) intel(0): Chipset: "Intel Integrated Graphics Device"
>(--) intel(0): Linear framebuffer at 0xD0000000
>(--) intel(0): IO registers at addr 0xFE400000
>(==) intel(0): Using EXA for acceleration
>(II) intel(0): 2 display pipes available.
>(II) Loading sub module "ddc"
>(II) LoadModule: "ddc"
>(II) Module "ddc" already built-in
>(II) Loading sub module "i2c"
>(II) LoadModule: "i2c"
>(II) Module "i2c" already built-in
>(II) intel(0): Output VGA has no monitor section
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
>(II) intel(0): No SDVO device found on SDVOB
>(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
>(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
>(II) intel(0): Output HDMI-1 has no monitor section
>(II) intel(0): I2C bus "HDMIDDC_B" initialized.
>(II) intel(0): HDMI output 1 detected
>(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
>(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
>(II) intel(0): EDID vendor "ACR", prod id 2223
>(II) intel(0): Using EDID range info for horizontal sync
>(II) intel(0): Using EDID range info for vertical refresh
>(II) intel(0): Printing DDC gathered Modelines:
>(II) intel(0): Modeline "1680x1050"x0.0  149.00  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (66.5 kHz)
>(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
>(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
>(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
>(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
>(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
>(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
>(II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
>(II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
>(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
>(II) intel(0): Modeline "1400x1050"x0.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 -hsync +vsync (65.3 kHz)
>(II) intel(0): Modeline "1360x765"x60.0   84.39  1360 1424 1568 1776  765 766 769 792 -hsync +vsync (47.5 kHz)
>(II) intel(0): EDID vendor "ACR", prod id 2223
>(II) intel(0): Output VGA connected
>(II) intel(0): Output HDMI-1 disconnected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output VGA using initial mode 1680x1050
>(II) intel(0): detected 512 kB GTT.
>(II) intel(0): detected 32768 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Intel XvMC decoder disabled
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>
>(II) Loading /usr/lib/xorg/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>
>(II) Reloading /usr/lib/xorg/modules//libint10.so
>(II) intel(0): initializing int10
>(WW) intel(0): Bad V_BIOS checksum
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 32704 kB
>(II) intel(0): VESA VBE OEM: Intel(r)Eaglelake Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r)Eaglelake Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(**) intel(0): Display dimensions: (480, 300) mm
>(**) intel(0): DPI set to (88, 142)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>
>(II) Loading /usr/lib/xorg/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.4
>(II) Loading sub module "exa"
>(II) LoadModule: "exa"
>
>(II) Loading /usr/lib/xorg/modules//libexa.so
>(II) Module exa: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 2.4.0
>	ABI class: X.Org Video Driver, version 4.1
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"
>(II) Module "ramdac" already built-in
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000120 to 0x38000120
>(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000b00 to 0x18040b00
>(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000206 to 0x00000000
>(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): PIPEASTAT after: status:
>(II) UnloadModule: "fbdev"
>(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
>(II) UnloadModule: "fbdevhw"
>(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
>(II) UnloadModule: "vesa"
>(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
>(==) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
>	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
>	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
>(II) intel(0): Kernel reported 482560 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 1930236 kB available
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card1
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card2
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card3
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card4
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card5
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card6
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card7
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card8
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card9
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card10
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card11
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card12
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card13
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card14
>drmOpenByBusid: drmOpenMinor returns -1
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 14, (OK)
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 14, (OK)
>drmGetBusid returned ''
>(II) [drm] loaded kernel module for "i915" driver.
>(II) [drm] DRM interface version 1.3
>(II) [drm] DRM open master succeeded.
>(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) intel(0): [drm] framebuffer mapped by ddx driver
>(II) intel(0): [drm] added 1 reserved context for kernel
>(II) intel(0): X context handle = 0x1
>(II) intel(0): [drm] installed DRM signal handler
>(**) intel(0): Framebuffer compression disabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 262144 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): [drm] Registers = 0x2fc80000
>(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
>(II) intel(0): [dri] visual configs initialized
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(II) EXA(0): Offscreen pixmap area of 36126720 bytes
>(II) EXA(0): Driver registered support for the following operations:
>(II)         Solid
>(II)         Copy
>(II)         Composite (RENDER acceleration)
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): [DRI] installation complete
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bd8c000 (pgoffset 48524)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x01ffffff: classic textures (32768 kB)
>(II) intel(0): 0x02000000:            end of stolen memory
>(II) intel(0): 0x02000000-0x0bd8bfff: DRI memory manager (161328 kB)
>(II) intel(0): 0x0bd8c000-0x0dffffff: exa offscreen (35280 kB)
>(II) intel(0): 0x10000000:            end of aperture
>(II) intel(0): BO memory allocation layout:
>(II) intel(0): 0x02000000:            start of memory manager
>(II) intel(0): 0x02021000-0x02b9cfff: depth buffer (11760 kB) Y tiled
>(II) intel(0): 0x03021000-0x03b9cfff: back buffer (11760 kB) X tiled
>(II) intel(0): 0x04100000-0x04c7bfff: front buffer (11760 kB) X tiled
>(II) intel(0): 0x04021000-0x04032fff: exa G965 state buffer (72 kB)
>(II) intel(0): 0x04041000-0x04048fff: logical 3D context (32 kB)
>(II) intel(0): 0x04049000-0x04052fff: HW cursors (40 kB)
>(II) intel(0): 0x0bd8c000:            end of memory manager
>(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
>(WW) intel(0): PRB0_HEAD (0x02001004) and PRB0_TAIL (0x00000000) indicate ring buffer not flushed
>(WW) intel(0): Existing errors found in hardware state.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is on
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(II) intel(0):   Pipe B is off
>(II) intel(0):   Display plane B is now disabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe A
>(II) intel(0):   Output HDMI-1 is connected to pipe none
>(EE) intel(0): [drm] failure adding irq handler
>(II) intel(0): [drm] mapped front buffer at 0xd4100000, handle = 0xd4100000
>(II) intel(0): [drm] mapped back buffer at 0xd3021000, handle = 0xd3021000
>(II) intel(0): [drm] mapped depth buffer at 0xd2021000, handle = 0xd2021000
>(II) intel(0): [drm] mapped classic textures at 0xd0000000, handle = 0xd0000000
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(II) intel(0): Set up textured video
>(II) intel(0): direct rendering: Enabled
>(--) RandR disabled
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 15, (OK)
>drmOpenByBusid: Searching for BusID pci:0000:00:02.0
>drmOpenDevice: node name is /dev/dri/card0
>drmOpenDevice: open result is 15, (OK)
>drmOpenByBusid: drmOpenMinor returns 15
>drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
>(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
>(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
>(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
>(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
>(II) GLX: Initialized DRI GL provider for screen 0
>(II) intel(0): Setting screen physical size to 474 x 296
>(II) config/hal: Adding input device Macintosh mouse button emulation
>(II) LoadModule: "evdev"
>
>(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
>(II) Module evdev: vendor="X.Org Foundation"
>	compiled for 1.5.0, module version = 2.0.4
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.1
>(**) Macintosh mouse button emulation: always reports core events
>(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
>(II) Macintosh mouse button emulation: Found x and y relative axes
>(II) Macintosh mouse button emulation: Found mouse buttons
>(II) Macintosh mouse button emulation: Configuring as mouse
>(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
>(II) config/hal: Adding input device ATEN 4 Port USB KVM B V1.80
>(**) ATEN 4 Port USB KVM B V1.80: always reports core events
>(**) ATEN 4 Port USB KVM B V1.80: Device: "/dev/input/event4"
>(II) ATEN 4 Port USB KVM B V1.80: Found x and y relative axes
>(II) ATEN 4 Port USB KVM B V1.80: Found mouse buttons
>(II) ATEN 4 Port USB KVM B V1.80: Configuring as mouse
>(II) XINPUT: Adding extended input device "ATEN 4 Port USB KVM B V1.80" (type: MOUSE)
>(II) config/hal: Adding input device ATEN 4 Port USB KVM B V1.80
>(**) ATEN 4 Port USB KVM B V1.80: always reports core events
>(**) ATEN 4 Port USB KVM B V1.80: Device: "/dev/input/event3"
>(II) ATEN 4 Port USB KVM B V1.80: Found keys
>(II) ATEN 4 Port USB KVM B V1.80: Configuring as keyboard
>(II) XINPUT: Adding extended input device "ATEN 4 Port USB KVM B V1.80" (type: KEYBOARD)
>(**) Option "xkb_rules" "base"
>(**) ATEN 4 Port USB KVM B V1.80: xkb_rules: "base"
>(**) Option "xkb_model" "evdev"
>(**) ATEN 4 Port USB KVM B V1.80: xkb_model: "evdev"
>(**) Option "xkb_layout" "us"
>(**) ATEN 4 Port USB KVM B V1.80: xkb_layout: "us"

Actions: View

Attachments on bug 463747: 317594