Attachment 317705 Details for Bug 462157 – dmesg output

dmesg output

dmesg.txt (text/plain), 42.48 KB, created by Gian Paolo Mureddu on 2008-09-25 16:18:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gian Paolo Mureddu

Created: 2008-09-25 16:18:38 UTC

Size: 42.48 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.26.3-29.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:16:37 EDT 2008
>Command line: ro root=UUID=a5db4d5f-7c3f-4350-929f-583f3f57e54d vga=803 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077e70000 (usable)
> BIOS-e820: 0000000077e70000 - 0000000077e82000 (ACPI data)
> BIOS-e820: 0000000077e82000 - 0000000077e84000 (ACPI NVS)
> BIOS-e820: 0000000077e84000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 157) 0 entries of 25600 used
>Entering add_active_range(0, 256, 491120) 1 entries of 25600 used
>max_pfn_mapped = 1048576
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>init_memory_mapping
>DMI present.
>ACPI: RSDP 000F82F0, 0024 (r2 TOSINV)
>ACPI: XSDT 77E7A38D, 0054 (r1 TOSINV TOSINV00  6040000  INV        0)
>ACPI: FACP 77E81A4A, 00F4 (r3 ATI    Herring   6040000 ATI     F4240)
>ACPI: DSDT 77E7A3E1, 7669 (r1 TOSINV    SB600  6040000 MSFT  100000E)
>ACPI: FACS 77E83FC0, 0040
>ACPI: SSDT 77E81BB2, 0210 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: APIC 77E81DC2, 0054 (r1 TOSINV 	 APIC    6040000  INV        0)
>ACPI: SLIC 77E81E16, 0176 (r1 TOSINV TOSINV00  6040000  INV        0)
>ACPI: MCFG 77E81F8C, 003C (r1 TOSINV   MCFG    6040000  INV        0)
>ACPI: HPET 77E81FC8, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: DMI detected: Toshiba
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000077e70000
>Entering add_active_range(0, 0, 157) 0 entries of 25600 used
>Entering add_active_range(0, 256, 491120) 1 entries of 25600 used
>Bootmem setup node 0 0000000000000000-0000000077e70000
>  NODE_DATA [000000000000c000 - 0000000000020fff]
>  bootmap [0000000000021000 -  000000000002ffcf] pages f
>  early res: 0 [0-fff] BIOS data page
>  early res: 1 [6000-7fff] TRAMPOLINE
>  early res: 2 [200000-84a54b] TEXT DATA BSS
>  early res: 3 [37d16000-37fef383] RAMDISK
>  early res: 4 [9dc00-fffff] BIOS reserved
>  early res: 5 [8000-bfff] PGTABLE
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   491120
>On node 0 totalpages: 491021
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1717 pages reserved
>  DMA zone: 2224 pages, LIFO batch:0
>  DMA32 zone: 6659 pages used for memmap
>  DMA32 zone: 480365 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>ACPI: HPET id: 0x43538301 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>PM: Registered nosave memory: 000000000009d000 - 000000000009e000
>PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 45104 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 482589
>Policy zone: DMA32
>Kernel command line: ro root=UUID=a5db4d5f-7c3f-4350-929f-583f3f57e54d vga=803 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC calibrated against PM_TIMER
>Marking TSC unstable due to TSCs unsynchronized
>time.c: Detected 1895.462 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>Node 0: aperture @ f9c000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>No AGP bridge found
>Memory: 1925692k/1964480k available (2699k kernel code, 38392k reserved, 1485k data, 980k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 3853.57 BogoMIPS (lpj=1926785)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>ACPI: Core revision 20080321
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
>Using local APIC timer interrupts.
>APIC timer calibration result 12470162
>Detected 12.470 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3790.98 BogoMIPS (lpj=1895491)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>AMD C1E detected late. Force timer broadcast.
>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
>Brought up 2 CPUs
>Total of 2 processors activated (7644.55 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5792 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>net_namespace: 1224 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 14:45:42  Date: 09/25/08
>NET: Registered protocol family 16
>No dock devices found.
>node 0 link 0: io port [1000, fffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [f8100000, ffffffff]
>node 0 link 0: mmio [f8000000, f80fffff]
>node 0 link 0: mmio [f8000000, f7ffffff]
>node 0 link 0: mmio [f0000000, f7ffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [f0000000, efffffff]
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [80000000, dfffffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [80000000, fcffffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 24
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - e18fffff
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored via DMI
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:12.0: set SATA to AHCI mode
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: Power Resource [PFA1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
>pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:06.0 BAR 8 (0x0-0xfffff), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 32-bit timers, 14318180 Hz
>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 0
>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 1
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:08: ioport range 0x1080-0x1080 has been reserved
>system 00:08: ioport range 0x220-0x22f has been reserved
>system 00:08: ioport range 0x40b-0x40b has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x4d6-0x4d6 has been reserved
>system 00:08: ioport range 0x530-0x537 has been reserved
>system 00:08: ioport range 0xc00-0xc01 has been reserved
>system 00:08: ioport range 0xc14-0xc14 has been reserved
>system 00:08: ioport range 0xc50-0xc52 has been reserved
>system 00:08: ioport range 0xc6c-0xc6c has been reserved
>system 00:08: ioport range 0xc6f-0xc6f has been reserved
>system 00:08: ioport range 0xcd0-0xcd1 has been reserved
>system 00:08: ioport range 0xcd2-0xcd3 has been reserved
>system 00:08: ioport range 0xcd4-0xcd5 has been reserved
>system 00:08: ioport range 0xcd6-0xcd7 has been reserved
>system 00:08: ioport range 0xcd8-0xcdf has been reserved
>system 00:08: ioport range 0xfe00-0xfe00 has been reserved
>system 00:08: ioport range 0x8000-0x805f has been reserved
>system 00:08: ioport range 0xf40-0xf47 has been reserved
>system 00:08: ioport range 0x87f-0x87f has been reserved
>system 00:09: iomem range 0xff800000-0xff80ffff has been reserved
>system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: 0xf8000000-0xf81fffff
>  PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: a000-afff
>  MEM window: 0xf8200000-0xf82fffff
>  PREFETCH window: 0x0000000088000000-0x00000000880fffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: 0xf8300000-0xf83fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 1
>Clockevents: could not switch to one-shot mode: lapic is not functional.
>Could not switch to high resolution mode on CPU 0
>Freeing initrd memory: 2916k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1222353940.596:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3766
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:05.0: Boot video device
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie02]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie03]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie02]
>Allocate Port Service[0000:00:06.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20002280000, using 6144k, total 16384k
>vesafb: mode is 1024x768x32, linelength=4096, pages=4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID]
>ACPI: Transitioning device [FAN1] to D3
>ACPI: PNP0C0B:00 is registered as cooling_device0
>ACPI: Fan [FAN1] (off)
>ACPI: ACPI0007:00 is registered as cooling_device1
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: ACPI0007:01 is registered as cooling_device2
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [TZCR] (38 C)
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 8:617:789
>Freeing unused kernel memory: 980k freed
>Write protecting the kernel read-only data: 3848k
>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8609400
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8604000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8605000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8606000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-6: new high speed USB device using ehci_hcd and address 3
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8607000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-6: configuration #1 chosen from 1 choice
>usb 1-6: New USB device found, idVendor=0bda, idProduct=8197
>usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6: Product: RTL8187B_WLAN_Adapter 
>usb 1-6: Manufacturer: Manufacturer_Realtek
>usb 1-6: SerialNumber: 00e04c000001
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.3
>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8608000
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>USB Universal Host Controller Interface driver v3.0
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ahci 0000:00:12.0: version 3.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>usb 2-1: configuration #1 chosen from 1 choice
>input: Full-Speed Mouse Full-Speed Mouse as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input6
>input,hiddev96,hidraw0: USB HID v1.11 Mouse [Full-Speed Mouse Full-Speed Mouse] on usb-0000:00:13.0-1
>usb 2-1: New USB device found, idVendor=062a, idProduct=6728
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: Full-Speed Mouse
>usb 2-1: Manufacturer: Full-Speed Mouse
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609280 irq 22
>ata1: softreset failed (device not ready)
>ata1: failed due to HW bug, retry pmp=0
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100
>ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/100
>ata2: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>isa bounce pool size: 16 pages
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda5: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 1229503
>ext3_orphan_cleanup: deleting unreferenced inode 1239475
>ext3_orphan_cleanup: deleting unreferenced inode 1338098
>ext3_orphan_cleanup: deleting unreferenced inode 1242837
>ext3_orphan_cleanup: deleting unreferenced inode 1238853
>ext3_orphan_cleanup: deleting unreferenced inode 1338347
>ext3_orphan_cleanup: deleting unreferenced inode 1238389
>ext3_orphan_cleanup: deleting unreferenced inode 1240644
>ext3_orphan_cleanup: deleting unreferenced inode 1229374
>ext3_orphan_cleanup: deleting unreferenced inode 1401539
>ext3_orphan_cleanup: deleting unreferenced inode 1616640
>ext3_orphan_cleanup: deleting unreferenced inode 1238383
>ext3_orphan_cleanup: deleting unreferenced inode 1242928
>ext3_orphan_cleanup: deleting unreferenced inode 1616813
>ext3_orphan_cleanup: deleting unreferenced inode 1238916
>ext3_orphan_cleanup: deleting unreferenced inode 1338231
>ext3_orphan_cleanup: deleting unreferenced inode 1240970
>ext3_orphan_cleanup: deleting unreferenced inode 1239729
>ext3_orphan_cleanup: deleting unreferenced inode 1241483
>ext3_orphan_cleanup: deleting unreferenced inode 1244938
>ext3_orphan_cleanup: deleting unreferenced inode 1242447
>ext3_orphan_cleanup: deleting unreferenced inode 1237965
>ext3_orphan_cleanup: deleting unreferenced inode 1616815
>ext3_orphan_cleanup: deleting unreferenced inode 1239306
>ext3_orphan_cleanup: deleting unreferenced inode 1243758
>ext3_orphan_cleanup: deleting unreferenced inode 1242196
>ext3_orphan_cleanup: deleting unreferenced inode 1243766
>ext3_orphan_cleanup: deleting unreferenced inode 1312501
>ext3_orphan_cleanup: deleting unreferenced inode 1338352
>ext3_orphan_cleanup: deleting unreferenced inode 1240603
>ext3_orphan_cleanup: deleting unreferenced inode 1238527
>ext3_orphan_cleanup: deleting unreferenced inode 1239268
>ext3_orphan_cleanup: deleting unreferenced inode 1312289
>ext3_orphan_cleanup: deleting unreferenced inode 1312288
>ext3_orphan_cleanup: deleting unreferenced inode 1295871
>ext3_orphan_cleanup: deleting unreferenced inode 1238408
>ext3_orphan_cleanup: deleting unreferenced inode 1244516
>ext3_orphan_cleanup: deleting unreferenced inode 1338154
>ext3_orphan_cleanup: deleting unreferenced inode 1241772
>ext3_orphan_cleanup: deleting unreferenced inode 1296154
>ext3_orphan_cleanup: deleting unreferenced inode 1335379
>ext3_orphan_cleanup: deleting unreferenced inode 1616882
>ext3_orphan_cleanup: deleting unreferenced inode 1242586
>ext3_orphan_cleanup: deleting unreferenced inode 1296000
>ext3_orphan_cleanup: deleting unreferenced inode 1312287
>ext3_orphan_cleanup: deleting unreferenced inode 1241721
>ext3_orphan_cleanup: deleting unreferenced inode 1312292
>ext3_orphan_cleanup: deleting unreferenced inode 1338228
>ext3_orphan_cleanup: deleting unreferenced inode 1242537
>ext3_orphan_cleanup: deleting unreferenced inode 1237812
>ext3_orphan_cleanup: deleting unreferenced inode 1242024
>ext3_orphan_cleanup: deleting unreferenced inode 1240207
>ext3_orphan_cleanup: deleting unreferenced inode 1295785
>ext3_orphan_cleanup: deleting unreferenced inode 1296122
>ext3_orphan_cleanup: deleting unreferenced inode 1242926
>ext3_orphan_cleanup: deleting unreferenced inode 1238134
>ext3_orphan_cleanup: deleting unreferenced inode 1296153
>ext3_orphan_cleanup: deleting unreferenced inode 1242459
>ext3_orphan_cleanup: deleting unreferenced inode 1238066
>ext3_orphan_cleanup: deleting unreferenced inode 1229536
>ext3_orphan_cleanup: deleting unreferenced inode 1295958
>ext3_orphan_cleanup: deleting unreferenced inode 1295952
>ext3_orphan_cleanup: deleting unreferenced inode 1241502
>ext3_orphan_cleanup: deleting unreferenced inode 1295995
>ext3_orphan_cleanup: deleting unreferenced inode 1245094
>ext3_orphan_cleanup: deleting unreferenced inode 245965
>ext3_orphan_cleanup: deleting unreferenced inode 1243844
>ext3_orphan_cleanup: deleting unreferenced inode 1616880
>ext3_orphan_cleanup: deleting unreferenced inode 1242971
>ext3_orphan_cleanup: deleting unreferenced inode 1240430
>ext3_orphan_cleanup: deleting unreferenced inode 1244654
>ext3_orphan_cleanup: deleting unreferenced inode 1242172
>ext3_orphan_cleanup: deleting unreferenced inode 1337918
>ext3_orphan_cleanup: deleting unreferenced inode 1338151
>ext3_orphan_cleanup: deleting unreferenced inode 1295980
>ext3_orphan_cleanup: deleting unreferenced inode 1240577
>ext3_orphan_cleanup: deleting unreferenced inode 1244350
>ext3_orphan_cleanup: deleting unreferenced inode 1295963
>ext3_orphan_cleanup: deleting unreferenced inode 1295784
>ext3_orphan_cleanup: deleting unreferenced inode 1295962
>ext3_orphan_cleanup: deleting unreferenced inode 1295960
>ext3_orphan_cleanup: deleting unreferenced inode 1295959
>ext3_orphan_cleanup: deleting unreferenced inode 1295961
>ext3_orphan_cleanup: deleting unreferenced inode 1239590
>ext3_orphan_cleanup: deleting unreferenced inode 1240989
>ext3_orphan_cleanup: deleting unreferenced inode 1517164
>ext3_orphan_cleanup: deleting unreferenced inode 1518495
>ext3_orphan_cleanup: deleting unreferenced inode 1296070
>ext3_orphan_cleanup: deleting unreferenced inode 1244955
>ext3_orphan_cleanup: deleting unreferenced inode 1244268
>ext3_orphan_cleanup: deleting unreferenced inode 1244041
>ext3_orphan_cleanup: deleting unreferenced inode 1243950
>ext3_orphan_cleanup: deleting unreferenced inode 1241365
>ext3_orphan_cleanup: deleting unreferenced inode 1295985
>ext3_orphan_cleanup: deleting unreferenced inode 1240940
>ext3_orphan_cleanup: deleting unreferenced inode 1310848
>ext3_orphan_cleanup: deleting unreferenced inode 1237848
>ext3_orphan_cleanup: deleting unreferenced inode 1295970
>ext3_orphan_cleanup: deleting unreferenced inode 1242005
>ext3_orphan_cleanup: deleting unreferenced inode 1244972
>ext3_orphan_cleanup: deleting unreferenced inode 1242702
>ext3_orphan_cleanup: deleting unreferenced inode 1244319
>ext3_orphan_cleanup: deleting unreferenced inode 1243796
>ext3_orphan_cleanup: deleting unreferenced inode 1242682
>ext3_orphan_cleanup: deleting unreferenced inode 1242164
>ext3_orphan_cleanup: deleting unreferenced inode 1295955
>ext3_orphan_cleanup: deleting unreferenced inode 1295954
>ext3_orphan_cleanup: deleting unreferenced inode 1295953
>ext3_orphan_cleanup: deleting unreferenced inode 1239606
>ext3_orphan_cleanup: deleting unreferenced inode 1295950
>ext3_orphan_cleanup: deleting unreferenced inode 1242409
>ext3_orphan_cleanup: deleting unreferenced inode 1240779
>ext3_orphan_cleanup: deleting unreferenced inode 1240652
>ext3_orphan_cleanup: deleting unreferenced inode 1296065
>ext3_orphan_cleanup: deleting unreferenced inode 1244569
>ext3_orphan_cleanup: deleting unreferenced inode 1296051
>ext3_orphan_cleanup: deleting unreferenced inode 1295986
>ext3_orphan_cleanup: deleting unreferenced inode 1295982
>ext3_orphan_cleanup: deleting unreferenced inode 1295296
>ext3_orphan_cleanup: deleting unreferenced inode 1241123
>ext3_orphan_cleanup: deleting unreferenced inode 1312281
>ext3_orphan_cleanup: deleting unreferenced inode 1295948
>ext3_orphan_cleanup: deleting unreferenced inode 1295947
>ext3_orphan_cleanup: deleting unreferenced inode 1242449
>ext3_orphan_cleanup: deleting unreferenced inode 1238543
>ext3_orphan_cleanup: deleting unreferenced inode 245956
>ext3_orphan_cleanup: deleting unreferenced inode 245959
>ext3_orphan_cleanup: deleting unreferenced inode 245953
>ext3_orphan_cleanup: deleting unreferenced inode 245865
>ext3_orphan_cleanup: deleting unreferenced inode 1295902
>ext3_orphan_cleanup: deleting unreferenced inode 1295991
>ext3_orphan_cleanup: deleting unreferenced inode 1312279
>ext3_orphan_cleanup: deleting unreferenced inode 1245141
>ext3_orphan_cleanup: deleting unreferenced inode 1295804
>ext3_orphan_cleanup: deleting unreferenced inode 1240485
>ext3_orphan_cleanup: deleting unreferenced inode 1240484
>ext3_orphan_cleanup: deleting unreferenced inode 1240438
>ext3_orphan_cleanup: deleting unreferenced inode 1315626
>ext3_orphan_cleanup: deleting unreferenced inode 1240487
>ext3_orphan_cleanup: deleting unreferenced inode 1295802
>ext3_orphan_cleanup: deleting unreferenced inode 245776
>ext3_orphan_cleanup: deleting unreferenced inode 245780
>ext3_orphan_cleanup: deleting unreferenced inode 245826
>ext3_orphan_cleanup: deleting unreferenced inode 245857
>ext3_orphan_cleanup: deleting unreferenced inode 245778
>ext3_orphan_cleanup: deleting unreferenced inode 983251
>ext3_orphan_cleanup: deleting unreferenced inode 1040459
>EXT3-fs: sda5: 147 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 172009 rules.
>SELinux: 8192 avtab hash slots, 172009 rules.
>SELinux:  8 users, 12 roles, 2382 types, 117 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 172009 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1222353959.891:2): policy loaded auid=4294967295 ses=4294967295
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:08:00.0 to 64
>r8169 0000:08:00.0: no MSI. Back to INTx.
>eth0: RTL8101e at 0xffffc20000346000, 00:a0:d1:83:37:f7, XID 34200000 IRQ 17
>ACPI: AC Adapter [ADP0] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>ACPI: device:20 is registered as cooling_device3
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/device:1e/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
>ricoh-mmc: Ricoh MMC Controller disabling driver
>ricoh-mmc: Copyright(c) Philip Langdale
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ata5.00: ATAPI: PIONEER DVD-RW DVR-K17LF, 4.53, max UDMA/33
>ata5.00: configured for UDMA/33
>rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
>         hardware, use at your own risk
>phy0: Selected rate control algorithm 'pid'
>scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW DVR-K17LF 4.53 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>ricoh-mmc: Ricoh MMC controller found at 0000:14:06.2 [1180:0843] (rev 12)
>ricoh-mmc: Controller is now disabled.
>sdhci: SDHCI controller found at 0000:14:06.1 [1180:0822] (rev 22)
>ACPI: PCI Interrupt 0000:14:06.1[B] -> GSI 21 (level, low) -> IRQ 21
>mmc0: Will use DMA mode even though HW doesn't fully claim to support it.
>Registered led device: mmc0
>mmc0: SDHCI at 0xf8300800 irq 21 DMA
>ACPI: PCI Interrupt 0000:14:06.0[A] -> GSI 20 (level, low) -> IRQ 20
>phy0: hwaddr 00:16:44:18:04:ab, RTL8187BvE V0 + rtl8225z2
>usbcore: registered new interface driver rtl8187
>firewire_ohci: Added fw-ohci device 0000:14:06.0, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
>firewire_core: created device fw0: GUID 00080da0d18337f7, S400
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 18 (level, low) -> IRQ 18
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading RS690 Microcode
>[drm] Num pipes: 1
>[drm] writeback test succeeded in 1 usecs
>[drm] Num pipes: 1
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda7, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4192924k swap on /dev/sda6.  Priority:-1 extents:1 across:4192924k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xb (1900 MHz), vid 0x11
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12
>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Clocksource tsc unstable (delta = -289697084 ns)
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>warning: `dbus-daemon' uses deprecated v2 capabilities in a way that may be insecure.
>fuse init (API version 7.9)
>SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>r8169: eth0: link up
>r8169: eth0: link up
>eth0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[drm] Setting GART location based on new memory map
>[drm] Loading RS690 Microcode
>[drm] Num pipes: 1
>[drm] writeback test succeeded in 1 usecs
>hda-intel: Invalid position buffer, using LPIB read method instead.
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>   domain 2: span 0-1
>    groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>   domain 2: span 0-1
>    groups: 0-1
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>   domain 2: span 0-1
>    groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>   domain 2: span 0-1
>    groups: 0-1
>wlan0: authenticate with AP 00:40:10:10:00:03
>wlan0: authenticated
>wlan0: associate with AP 00:40:10:10:00:03
>wlan0: RX AssocResp from 00:40:10:10:00:03 (capab=0x411 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>wlan0: no IPv6 routers present
>APIC error on CPU1: 00(40)
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>APIC error on CPU1: 40(40)
>gvfs-fuse-daemo[2772] general protection ip:3f324088aa sp:7fff6af72d30 error:0 in libpthread-2.8.so[3f32400000+16000]
>[drm] Num pipes: 1
>tomboy[2857]: segfault at 342720 ip 342720 sp 7fff1d7e5598 error 14 in mono[400000+1f3000]
>[drm] Setting GART location based on new memory map
>[drm] Loading RS690 Microcode
>[drm] Num pipes: 1
>[drm] writeback test succeeded in 1 usecs
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1
>  groups: 0 1
>  domain 1: span 0-1
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1
>  groups: 1 0
>  domain 1: span 0-1
>   groups: 0-1
>APIC error on CPU1: 40(40)
>APIC error on CPU1: 40(40)
>APIC error on CPU1: 40(40)
>APIC error on CPU1: 40(40)
>APIC error on CPU1: 40(40)
>APIC error on CPU1: 40(40)
>APIC error on CPU0: 00(40)
>usb 2-2: new full speed USB device using ohci_hcd and address 3
>usb 2-2: device descriptor read/64, error -62
>usb 2-2: device descriptor read/64, error -62
>usb 2-2: new full speed USB device using ohci_hcd and address 4
>usb 2-2: device descriptor read/64, error -62
>usb 2-2: device descriptor read/64, error -62
>hub 2-0:1.0: unable to enumerate USB device on port 2
>usb 2-2: new full speed USB device using ohci_hcd and address 6
>usb 2-2: configuration #1 chosen from 2 choices
>usb 2-2: New USB device found, idVendor=22b8, idProduct=4810
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Motorola Phone (V3i)
>usb 2-2: Manufacturer: Motorola Inc.
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 6:0:0:0: Direct-Access     Motorola Motorola Phone   2.31 PQ: 0 ANSI: 2
>sd 6:0:0:0: [sdb] 248320 512-byte hardware sectors (127 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
>sd 6:0:0:0: [sdb] 248320 512-byte hardware sectors (127 MB)
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>sd 6:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 6:0:0:0: [sdb] Attached SCSI removable disk
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>APIC error on CPU1: 40(40)

Actions: View

Attachments on bug 462157: 316642 | 316643 | 316644 | 317704 | 317705 | 317706 | 319620 | 321862 | 321863 | 321864 | 321993 | 322174 | 322189 | 322195 | 322196 | 322470 | 323173 | 323420 | 323671 | 323992 | 324005 | 324080 | 324210 | 324216