Attachment 317855 Details for Bug 464294 – stdout of dmesg

stdout of dmesg

dmesg-stdout (text/plain), 30.39 KB, created by Matěj Cepl on 2008-09-27 08:45:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2008-09-27 08:45:44 UTC

Size: 30.39 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.26.5-27.fc8 (mockbuild@x86-7.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Sep 19 20:09:06 EDT 2008
>PAT disabled. Not yet verified on this CPU type.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001f7d3800 (usable)
> BIOS-e820: 000000001f7d3800 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>503MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 128979) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   128979
>  HighMem    128979 ->   128979
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->   128979
>On node 0 totalpages: 128979
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 976 pages used for memmap
>  Normal zone: 123907 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
>ACPI: RSDT 1F7D4425, 0038 (r1 DELL    CPi R   27D5031F ASL        61)
>ACPI: FACP 1F7D4C00, 0074 (r1 DELL    CPi R   27D5031F ASL        61)
>ACPI: DSDT 1F7D5800, 2D96 (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 1F7E4000, 0040
>ACPI: APIC 1F7D5400, 0068 (r1 DELL    CPi R   27D5031F ASL        47)
>ACPI: MCFG 1F7D53C0, 003E (r16 DELL    CPi R   27D5031F ASL        61)
>ACPI: SSDT 1F7D4658, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
>ACPI: SSDT 1F7D445D, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>PERCPU: Allocating 41384 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 127971
>Kernel command line: ro root=/dev/vol0/lvRoot
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ca000 soft=c07aa000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1396.531 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 502556k/515916k available (2251k kernel code, 12828k reserved, 1179k data, 284k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc53000 - 0xfffff000   (3760 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0000000 - 0xff3fe000   ( 499 MB)
>    lowmem  : 0xc0000000 - 0xdf7d3000   ( 503 MB)
>      .init : 0xc0760000 - 0xc07a7000   ( 284 kB)
>      .data : 0xc0632d1f - 0xc0759b88   (1179 kB)
>      .text : 0xc0400000 - 0xc0632d1f   (2251 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay using timer specific routine.. 2795.56 BogoMIPS (lpj=1397784)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080321
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Celeron(R) M processor         1.40GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (2795.56 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=180 bytes
>sizeof(task_struct)=3188 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0
>  groups: 0
>net_namespace: 660 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 22:31:45  Date: 09/26/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xfbaae, last bus=3
>PCI: Using configuration type 1 for base access
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0b: can't add resource for IO 0x57b0-0x57bb
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x1f7d37ff could not be reserved
>system 00:00: iomem range 0x1f7d3800-0x1f7fffff could not be reserved
>system 00:00: iomem range 0x1f800000-0x1fffffff could not be reserved
>system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
>system 00:00: iomem range 0xf0004000-0xf0004fff could not be reserved
>system 00:00: iomem range 0xf0005000-0xf0005fff could not be reserved
>system 00:00: iomem range 0xf0006000-0xf0006fff could not be reserved
>system 00:00: iomem range 0xf0008000-0xf000bfff could not be reserved
>system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x1000-0x1005 has been reserved
>system 00:02: ioport range 0x1008-0x100f has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1006-0x1007 has been reserved
>system 00:03: ioport range 0x100a-0x1059 could not be reserved
>system 00:03: ioport range 0x1060-0x107f has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x10e0-0x10ff has been reserved
>system 00:08: ioport range 0x900-0x90f has been reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0x930-0x93f has been reserved
>system 00:08: ioport range 0x940-0x97f has been reserved
>system 00:0b: ioport range 0x7b0-0x7bb has been reserved
>system 00:0b: ioport range 0x7c0-0x7df has been reserved
>system 00:0b: ioport range 0xbb0-0xbbb has been reserved
>system 00:0b: ioport range 0xbc0-0xbdf has been reserved
>system 00:0b: ioport range 0xfb0-0xfbb has been reserved
>system 00:0b: ioport range 0xfc0-0xfdf has been reserved
>system 00:0b: ioport range 0x13b0-0x13bb has been reserved
>system 00:0b: ioport range 0x13c0-0x13df has been reserved
>system 00:0b: ioport range 0x17b0-0x17bb has been reserved
>system 00:0b: ioport range 0x17c0-0x17df has been reserved
>system 00:0b: ioport range 0x1bb0-0x1bbb has been reserved
>system 00:0b: ioport range 0x1bc0-0x1bdf has been reserved
>system 00:0b: ioport range 0x1fb0-0x1fbb has been reserved
>system 00:0b: ioport range 0x1fc0-0x1fdf has been reserved
>system 00:0b: ioport range 0x23b0-0x23bb has been reserved
>system 00:0b: ioport range 0x23c0-0x23df has been reserved
>system 00:0b: ioport range 0x27b0-0x27bb has been reserved
>system 00:0b: ioport range 0x27c0-0x27df has been reserved
>system 00:0b: ioport range 0x2bb0-0x2bbb has been reserved
>system 00:0b: ioport range 0x2bc0-0x2bdf has been reserved
>system 00:0b: ioport range 0x2fb0-0x2fbb has been reserved
>system 00:0b: ioport range 0x2fc0-0x2fdf has been reserved
>system 00:0b: ioport range 0x33b0-0x33bb has been reserved
>system 00:0b: ioport range 0x33c0-0x33df has been reserved
>system 00:0b: ioport range 0x37b0-0x37bb has been reserved
>system 00:0b: ioport range 0x37c0-0x37df has been reserved
>system 00:0b: ioport range 0x3bb0-0x3bbb has been reserved
>system 00:0b: ioport range 0x3bc0-0x3bdf has been reserved
>system 00:0b: ioport range 0x3fb0-0x3fbb has been reserved
>system 00:0b: ioport range 0x3fc0-0x3fdf has been reserved
>system 00:0b: ioport range 0x43b0-0x43bb has been reserved
>system 00:0b: ioport range 0x43c0-0x43df has been reserved
>system 00:0b: ioport range 0x47b0-0x47bb has been reserved
>system 00:0b: ioport range 0x47c0-0x47df has been reserved
>system 00:0b: ioport range 0x4bb0-0x4bbb has been reserved
>system 00:0b: ioport range 0x4bc0-0x4bdf has been reserved
>system 00:0b: ioport range 0x4fb0-0x4fbb has been reserved
>system 00:0b: ioport range 0x4fc0-0x4fdf has been reserved
>system 00:0b: ioport range 0x53b0-0x53bb has been reserved
>system 00:0b: ioport range 0x53c0-0x53df has been reserved
>PCI: region 0000:02:01.0/9 too large: 0x0000000000000000-0x0000000003ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0x0000d000-0x0000d0ff
>  IO window: 0x0000d400-0x0000d4ff
>  MEM window: 0x30000000-0x33ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: 0xdfd00000-0xdfdfffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>pci 0000:02:01.0: enabling device (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 3659k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1222468305.693:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 988
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 6DE12990D5574925
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Lid Switch as /class/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: LNXTHERM:01 is registered as thermal_zone0
>ACPI: Thermal Zone [THM] (49 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input3
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:784:553
>  hash matches device PNP0C0F:04
>Freeing unused kernel memory: 284k freed
>Write protecting the kernel text: 2252k
>Write protecting the kernel read-only data: 960k
>Marking TSC unstable due to: TSC halts in idle.
>input: AT Translated Set 2 keyboard as /class/input/input4
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.26.5-27.fc8 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.26.5-27.fc8 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.26.5-27.fc8 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input5
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.26.5-27.fc8 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.26.5-27.fc8 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ACPI: PCI interrupt for device 0000:00:1f.1 disabled
>ata_piix 0000:00:1f.1: version 2.12
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>ata1.00: ATA-6: Hitachi HTS424030M9AT00, MAAOA71A, max UDMA/100
>ata1.00: 58605120 sectors, multi 8: LBA48 
>ata1.01: ATAPI: SONY CD-RW/DVD-ROM CRX830E, KDKA, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS42403 MAAO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 0:0:1:0: CD-ROM            SONY     CDRW/DVD CRX830E KDKA PQ: 0 ANSI: 5
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: New USB device found, idVendor=0457, idProduct=0151
>usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: 8192 avtab hash slots, 223052 rules.
>SELinux: 8192 avtab hash slots, 223052 rules.
>SELinux:  6 users, 12 roles, 2421 types, 116 bools, 1 sens, 1024 cats
>SELinux:  67 classes, 223052 rules
>SELinux:  class peer not defined in policy
>SELinux:  class capability2 not defined in policy
>SELinux:  permission open in class dir not defined in policy
>SELinux:  permission open in class file not defined in policy
>SELinux:  permission open in class chr_file not defined in policy
>SELinux:  permission open in class blk_file not defined in policy
>SELinux:  permission open in class fifo_file not defined in policy
>SELinux:  permission recvfrom in class node not defined in policy
>SELinux:  permission sendto in class node not defined in policy
>SELinux:  permission ingress in class netif not defined in policy
>SELinux:  permission egress in class netif not defined in policy
>SELinux:  permission setfcap in class capability not defined in policy
>SELinux:  permission forward_in in class packet not defined in policy
>SELinux:  permission forward_out in class packet not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: policy loaded with handle_unknown=allow
>type=1403 audit(1222468316.377:2): policy loaded auid=4294967295 ses=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>input: PC Speaker as /class/input/input6
>iTCO_vendor_support: vendor-support=0
>ACPI: AC Adapter [AC] (on-line)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: Battery Slot [BAT0] (battery present)
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:01a4]
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0x0000d000-0x0000d0ff
>  IO window: 0x0000d400-0x0000d4ff
>  PREFETCH window: 0x34000000-0x343fffff
>  MEM window: 0x30000000-0x33ffffff
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x00001002, devctl 0x64
>e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000007
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xdfd00000 - 0xdfdfffff
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>e100: eth0: e100_probe: addr 0xdfdfd000, irq 20, MAC addr 00:11:43:52:2e:aa
>input: Video Bus as /class/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /class/input/input8
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>b43-phy0: Broadcom 4318 WLAN found
>b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>phy0: Selected rate control algorithm 'pid'
>intel8x0_measure_ac97_clock: measured 50447 usecs
>intel8x0: clocking to 48000
>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>Clocksource tsc unstable (delta = -396982568 ns)
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     USB2.0   USB Flash Disk   0.00 PQ: 0 ANSI: 2
>sd 2:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 256000 512-byte hardware sectors (131 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb:
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>loop: module loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>Adding 1015800k swap on /dev/mapper/vol0-lvSwap.  Priority:-1 extents:1 across:1015800k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>warning: process `kudzu' used the deprecated sysctl system call with 1.23.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>input: b43-phy0 as /class/input/input9
>firmware: requesting b43/ucode5.fw
>firmware: requesting b43/pcm5.fw
>firmware: requesting b43/b0g0initvals5.fw
>firmware: requesting b43/b0g0bsinitvals5.fw
>b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>Registered led device: b43-phy0::tx
>Registered led device: b43-phy0::rx
>Registered led device: b43-phy0::radio
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authentication with AP 00:19:5b:22:28:44 timed out
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authentication with AP 00:19:5b:22:28:44 timed out
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authentication with AP 00:19:5b:22:28:44 timed out
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authentication with AP 00:19:5b:22:28:44 timed out
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authenticate with AP 00:19:5b:22:28:44
>wlan0: authentication with AP 00:19:5b:22:28:44 timed out

Actions: View

Attachments on bug 464294: 317853 | 317854 | 317855 | 317861 | 317862 | 317863