Attachment 317872 Details for Bug 163701 – Output from k3b using wodim.

Output from k3b using wodim.

k3bdebug (text/plain), 6.21 KB, created by Bruno Wolff III on 2008-09-27 22:48:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bruno Wolff III

Created: 2008-09-27 22:48:44 UTC

Size: 6.21 KB

patch

obsolete

>System
>-----------------------
>K3b Version: 1.0.5
>
>KDE Version: 3.5.10-1.fc10 Fedora
>QT Version:  3.3.8b
>Kernel:      2.6.27-0.354.rc7.git3.fc10.i686
>Devices
>-----------------------
>IDE DVD-ROM 16X 2.97 (/dev/sr0, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]
>
>_NEC DVD_RW ND-1300A 1.0C (/dev/sr1, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96R, RAW/R96R, Restricted Overwrite]
>K3bIsoImager
>-----------------------
>mkisofs print size result: 623 (1275904 bytes)
>Pipe throughput: 1275904 bytes read, 1275904 bytes written.
>
>Used versions
>-----------------------
>mkisofs: 1.1.8
>cdrecord: 1.1.8
>
>cdrecord
>-----------------------
>/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr1'
>devname: '/dev/sr1'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>Wodim version: 1.1.8
>SCSI buffer size: 64512
>Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
>communication breaks or freezes immediately after that.
>Speed set to 706 KB/s
>TOC Type: 1 = CD-ROM
>Driveropts: 'burnfree'
>Device type    : Removable CD-ROM
>Version        : 5
>Response Format: 2
>Capabilities   : 
>Vendor_info    : '_NEC    '
>Identification : 'DVD_RW ND-1300A '
>Revision       : '1.0C'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Current: 0x000A (CD-RW)
>Profile: 0x001B (DVD+R) 
>Profile: 0x001A (DVD+RW) 
>Profile: 0x0014 (DVD-RW sequential recording) 
>Profile: 0x0013 (DVD-RW restricted overwrite) 
>Profile: 0x0011 (DVD-R sequential recording) 
>Profile: 0x0010 (DVD-ROM) 
>Profile: 0x000A (CD-RW) (current)
>Profile: 0x0009 (CD-R) 
>Profile: 0x0008 (CD-ROM) (current)
>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Drive buf size : 1345536 = 1314 KB
>FIFO size      : 2097152 = 2048 KB
>Track 01: data     1 MB        
>Total size:        1 MB (00:08.30) = 623 sectors
>Lout start:        1 MB (00:10/23) = 623 sectors
>Current Secsize: 2048
>ATIP info from disk:
>  Indicated writing power: 5
>  Reference speed: 2
>  Is not unrestricted
>  Is erasable
>  ATIP start of lead in:  -11635 (97:26/65)
>  ATIP start of lead out: 337350 (75:00/00)
>  1T speed low:  0 (reserved val  0) 1T speed high:  4
>  2T speed low:  8 2T speed high:  0 (reserved val 10)
>  power mult factor: 4 6
>  recommended erase/write power: 3
>  A1 values: 02 4C B0
>  A2 values: 4A C8 06
>Disk type:    Phase change
>Manuf. index: 3
>Manufacturer: CMC Magnetics Corporation
>Blocks total: 337350 Blocks current: 337350 Blocks remaining: 336727
>Starting to write CD/DVD at speed   4.0 in real SAO mode for single session.
>Last chance to quit, starting real write in    2 seconds.
>   1 seconds.
>   0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Performing OPC...
>Sending CUE sheet...
>Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
>CDB:  2A 00 FF FF FF 6A 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
>Sense Key: 0x0 No Additional Sense, Segment 11
>Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
>Sense flags: Blk 0 (not valid) 
>cmd finished after 200.208s timeout 200s
>Writing pregap for track 1 at -150
>write track pad data: error after 0 bytes
>BFree: 1435 K BSize: 1509 K
>Starting new track at sector: 0
>Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
>CDB:  2A 00 00 00 00 00 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
>Sense flags: Blk 0 (not valid) 
>cmd finished after 0.021s timeout 200s
>/usr/bin/wodim: The current problem looks like a buffer underrun.
>/usr/bin/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
>/usr/bin/wodim: Please report.
>/usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
>Track 01:    0 of    1 MB written.
>write track data: error after 0 bytes
>Writing  time:  207.866s
>Average write speed   0.0x.
>Fixating...
>Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
>CDB:  35 00 00 00 00 00 00 00 00 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 03 00 00
>Sense Key: 0x0 No Additional Sense, Segment 11
>Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
>Sense flags: Blk 0 (not valid) 
>cmd finished after 210.204s timeout 200s
>Trouble flushing the cache
>Fixating time:  419.920s
>/usr/bin/wodim: fifo had 21 puts and 1 gets.
>/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
>BURN-Free was never needed.
>
>cdrecord command:
>-----------------------
>/usr/bin/wodim -v gracetime=2 dev=/dev/sr1 speed=4 -dao driveropts=burnfree fs=2m -data -tsize=623s - 
>
>mkisofs
>-----------------------
>623
>I: -input-charset not specified, using utf-8 (detected in locale settings)
>Total translation table size: 0
>Total rockridge attributes bytes: 279
>Total directory bytes: 414
>Path table size(bytes): 10
>Max brk space used 0
>623 extents written (1 MB)
>
>mkisofs calculate size command:
>-----------------------
>/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid xorg-x11-drv-ati-6.9.0-18.fc10.s -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-bruno/k3bUtWhaa.tmp -rational-rock -hide-list /tmp/kde-bruno/k3bLRj6ab.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-bruno/k3bk507Zb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-bruno/k3bK6cysa.tmp 
>
>mkisofs command:
>-----------------------
>/usr/bin/genisoimage -gui -graft-points -volid xorg-x11-drv-ati-6.9.0-18.fc10.s -volset  -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-bruno/k3bNIuYYa.tmp -rational-rock -hide-list /tmp/kde-bruno/k3b8yFena.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-bruno/k3bwP1RUb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-bruno/k3bYJjSka.tmp 
>

Actions: View

Attachments on bug 163701: 317872 | 317873 | 317874 | 317875