Attachment 318146 Details for Bug 464860 – dmesg

dmesg

dmesg.log (text/plain), 42.89 KB, created by Laurence on 2008-09-30 22:19:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Laurence

Created: 2008-09-30 22:19:19 UTC

Size: 42.89 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.352.rc7.git1.fc10.i686 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.3.2 20080917 (Red Hat 4.3.2-4) (GCC) ) #1 SMP Tue Sep 23 21:26:04 EDT 2008
>PAT WC disabled due to known CPU erratum.
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffda000 (usable)
> BIOS-e820: 000000001ffda000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>last_pfn = 0x1ffda max_arch_pfn = 0x100000
>kernel direct mapping tables up to 1ffda000 @ 7000-d000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 1fc92000 - 1ffc9c50
>DMI 2.3 present.
>ACPI: RSDP 000FC9B0, 0014 (r0 DELL  )
>ACPI: RSDT 1FFDA7D3, 0040 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: FACP 1FFDB400, 0074 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: DSDT 1FFDC000, 2A1A (r1 INT430 SYSFexxx     1001 MSFT  100000E)
>ACPI: FACS 1FFEA800, 0040
>ACPI: APIC 1FFDBC00, 0068 (r1 DELL    CPi R   27D50913 ASL        47)
>ACPI: MCFG 1FFDBBC0, 003E (r16 DELL    CPi R   27D50913 ASL        61)
>ACPI: BOOT 1FFDB7C0, 0028 (r1 DELL    CPi R   27D50913 ASL        61)
>ACPI: SSDT 1FFDABE6, 0280 (r1  PmRef  Cpu0Ist     3000 INTL 20030522)
>ACPI: SSDT 1FFDAA0E, 01D8 (r1  PmRef  Cpu0Cst     3001 INTL 20030522)
>ACPI: SSDT 1FFDA813, 01FB (r1  PmRef    CpuPm     3000 INTL 20030522)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>  mapped low ram: 0 - 1ffda000
>  low ram: 00000000 - 1ffda000
>  bootmap 00002000 - 00005ffc
>(9 early reservations) ==> bootmem [0000000000 - 001ffda000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000ef5134]    TEXT DATA BSS ==> [0000400000 - 0000ef5134]
>  #4 [001fc92000 - 001ffc9c50]          RAMDISK ==> [001fc92000 - 001ffc9c50]
>  #5 [0000ef6000 - 0000f0c000]    INIT_PG_TABLE ==> [0000ef6000 - 0000f0c000]
>  #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #7 [0000007000 - 0000009000]          PGTABLE ==> [0000007000 - 0000009000]
>  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0001ffda
>  HighMem  0x0001ffda -> 0x0001ffda
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001ffda
>On node 0 totalpages: 130937
>free_area_init_node: node 0, pgdat c084b080, node_mem_map c1001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 125202 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 1 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>PERCPU: Allocating 1221020 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129145
>Kernel command line: ro root=UUID=913c27f7-76db-4427-9f01-1fcaa441ef1e rhgb quiet
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0a01000 soft=c09e1000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PMTIMER calibration value
>Detected 1862.112 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 2463 kB
> per task-struct memory footprint: 1920 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 498856k/524136k available (2980k kernel code, 24688k reserved, 1507k data, 1500k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff3fe000   ( 491 MB)
>    lowmem  : 0xc0000000 - 0xdffda000   ( 511 MB)
>      .init : 0xc0867000 - 0xc09de000   (1500 kB)
>      .data : 0xc06e91e8 - 0xc0861fe0   (1507 kB)
>      .text : 0xc0400000 - 0xc06e91e8   (2980 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 16 of 16 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.22 BogoMIPS (lpj=1862112)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (3724.22 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5296 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>khelper used greatest stack depth: 3028 bytes left
>net_namespace: 912 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 23:07:58  Date: 09/30/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>khelper used greatest stack depth: 2932 bytes left
>khelper used greatest stack depth: 2604 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>PCI: 0000:00:1d.0 reg 20 io port: [bf80, bf9f]
>PCI: 0000:00:1d.1 reg 20 io port: [bf60, bf7f]
>PCI: 0000:00:1d.2 reg 20 io port: [bf40, bf5f]
>PCI: 0000:00:1d.3 reg 20 io port: [bf20, bf3f]
>PCI: 0000:00:1d.7 reg 10 32bit mmio: [ffa80800, ffa80bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>PCI: 0000:00:1e.2 reg 10 io port: [ed00, edff]
>PCI: 0000:00:1e.2 reg 14 io port: [ec40, ec7f]
>PCI: 0000:00:1e.2 reg 18 32bit mmio: [dffffe00, dfffffff]
>PCI: 0000:00:1e.2 reg 1c 32bit mmio: [dffffd00, dffffdff]
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>PCI: 0000:00:1e.3 reg 10 io port: [ee00, eeff]
>PCI: 0000:00:1e.3 reg 14 io port: [ec80, ecff]
>pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.3: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
>PCI: 0000:00:1f.2 reg 10 io port: [1f0, 1f7]
>PCI: 0000:00:1f.2 reg 14 io port: [3f4, 3f7]
>PCI: 0000:00:1f.2 reg 18 io port: [170, 177]
>PCI: 0000:00:1f.2 reg 1c io port: [374, 377]
>PCI: 0000:00:1f.2 reg 20 io port: [bfa0, bfaf]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 20 io port: [10c0, 10df]
>PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
>PCI: 0000:01:00.0 reg 14 io port: [de00, deff]
>PCI: 0000:01:00.0 reg 18 32bit mmio: [dfdf0000, dfdfffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [dfe00000, dfe1ffff]
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:01.0 io port: [d000, dfff]
>PCI: bridge 0000:00:01.0 32bit mmio: [dfd00000, dfefffff]
>PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, d7ffffff]
>PCI: 0000:03:00.0 reg 10 32bit mmio: [dfcfe000, dfcfffff]
>pci 0000:03:00.0: supports D1
>pci 0000:03:00.0: supports D2
>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>PCI: 0000:03:01.0 reg 10 32bit mmio: [0, fff]
>pci 0000:03:01.0: supports D1
>pci 0000:03:01.0: supports D2
>pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.0: PME# disabled
>PCI: 0000:03:01.1 reg 10 32bit mmio: [dfcfc800, dfcfcfff]
>pci 0000:03:01.1: supports D1
>pci 0000:03:01.1: supports D2
>pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.1: PME# disabled
>PCI: 0000:03:01.2 reg 10 32bit mmio: [dfcfc700, dfcfc7ff]
>pci 0000:03:01.2: supports D1
>pci 0000:03:01.2: supports D2
>pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:03:01.2: PME# disabled
>PCI: 0000:03:03.0 reg 10 32bit mmio: [dfcfd000, dfcfdfff]
>pci 0000:03:03.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:03.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>PCI: bridge 0000:00:1e.0 32bit mmio: [dfc00000, dfcfffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:02: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp 00:03: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:00: iomem range 0x0-0x9fbff could not be reserved
>system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xcffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x1ffd9fff could not be reserved
>system 00:00: iomem range 0x1ffda000-0x1fffffff could not be reserved
>system 00:00: iomem range 0xfeda0000-0xfedfffff could not be reserved
>system 00:00: iomem range 0xffb00000-0xffffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfee0ffff could not be reserved
>system 00:00: iomem range 0xfed20000-0xfed9ffff could not be reserved
>system 00:00: iomem range 0xf0000000-0xf0003fff could not be reserved
>system 00:00: iomem range 0xf0004000-0xf0004fff could not be reserved
>system 00:00: iomem range 0xf0005000-0xf0005fff could not be reserved
>system 00:00: iomem range 0xf0006000-0xf0006fff could not be reserved
>system 00:00: iomem range 0xf0008000-0xf000bfff could not be reserved
>system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:03: ioport range 0xf400-0xf4fe has been reserved
>system 00:03: ioport range 0x1080-0x10bf has been reserved
>system 00:03: ioport range 0x10c0-0x10df has been reserved
>system 00:03: ioport range 0x10e0-0x10ff has been reserved
>system 00:08: ioport range 0x900-0x90f has been reserved
>system 00:08: ioport range 0x910-0x91f has been reserved
>system 00:08: ioport range 0x920-0x92f has been reserved
>system 00:08: ioport range 0x930-0x93f has been reserved
>system 00:08: ioport range 0x940-0x97f has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xd000-0xdfff
>pci 0000:00:01.0:   MEM window: 0xdfd00000-0xdfefffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
>pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
>pci 0000:03:01.0:   IO window: 0x002000-0x0020ff
>pci 0000:03:01.0:   IO window: 0x002400-0x0024ff
>pci 0000:03:01.0:   PREFETCH window: 0x30000000-0x33ffffff
>pci 0000:03:01.0:   MEM window: 0x34000000-0x37ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: 0x2000-0x2fff
>pci 0000:00:1e.0:   MEM window: 0xdfc00000-0xdfcfffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000030000000-0x00000033ffffff
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:03:01.0: enabling device (0000 -> 0003)
>pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [d000, dfff]
>bus: 01 index 1 mmio: [dfd00000, dfefffff]
>bus: 01 index 2 mmio: [d0000000, d7ffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 03 index 0 io port: [2000, 2fff]
>bus: 03 index 1 mmio: [dfc00000, dfcfffff]
>bus: 03 index 2 mmio: [30000000, 33ffffff]
>bus: 03 index 3 io port: [0, ffff]
>bus: 03 index 4 mmio: [0, ffffffffffffffff]
>bus: 04 index 0 io port: [2000, 20ff]
>bus: 04 index 1 io port: [2400, 24ff]
>bus: 04 index 2 mmio: [30000000, 33ffffff]
>bus: 04 index 3 mmio: [34000000, 37ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 7, 589824 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>debug: unmapping init memory dfc92000..dffca000
>Simple Boot Flag at 0x79 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1222816078.288:1): initialized
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 974
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
>pci 0000:00:1d.0: Performing full reset
>pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
>pci 0000:00:1d.1: Performing full reset
>pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0080
>pci 0000:00:1d.2: Performing full reset
>pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0080
>pci 0000:00:1d.3: Performing full reset
>pci 0000:01:00.0: Boot video device
>pcieport-driver 0000:00:01.0: setting latency timer to 64
>pcieport-driver 0000:00:01.0: found MSI capability
>pci_express 0000:00:01.0:pcie00: allocate port service
>pci_express 0000:00:01.0:pcie03: allocate port service
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (61 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:1e.3: PCI INT B disabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ahci 0000:00:1f.2: PCI INT B disabled
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>ata1.00: ATA-6: FUJITSU MHV2060AH, 00000096, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 202C, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060A 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-6500A 202C PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>ehci_hcd 0000:00:1d.7: reset command 000002 (park)=0 ithresh=0 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: default language 0x0409
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3: status 0501 change 0001
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 8: status 0501 change 0001
>hub 1-0:1.0: state 7 ports 8 chg 0108 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.352.rc7.git1.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 64 td 64
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: detected 2 ports
>uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.0: Performing full reset
>uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: default language 0x0409
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
>ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003801 POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 3 not reset yet, waiting 50ms
>ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.352.rc7.git1.fc10.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '003'
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: detected 2 ports
>uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.1: Performing full reset
>uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
>usb usb3: default language 0x0409
>usb usb3: uevent
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>usb 3-0:1.0: uevent
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: individual port over-current protection
>hub 3-0:1.0: power on to power good time: 2ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:1d.7: port 8 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
>usb 1-8: new high speed USB device using ehci_hcd and address 3
>uhci_hcd 0000:00:1d.1: port 1 portsc 009b,00
>hub 3-0:1.0: port 1: status 0101 change 0003
>ehci_hcd 0000:00:1d.7: port 8 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
>drivers/usb/core/inode.c: creating file '001'
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.352.rc7.git1.fc10.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '004'
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: detected 2 ports
>uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.2: Performing full reset
>uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb4: default language 0x0409
>usb usb4: uevent
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>usb 4-0:1.0: uevent
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: individual port over-current protection
>hub 4-0:1.0: power on to power good time: 2ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>usb 1-8: default language 0x0409
>usb 1-8: uevent
>usb 1-8: usb_probe_device
>usb 1-8: configuration #1 chosen from 1 choice
>usb 1-8: adding 1-8:1.0 (config #1, interface 0)
>usb 1-8:1.0: uevent
>drivers/usb/core/inode.c: creating file '003'
>usb 1-8: New USB device found, idVendor=090c, idProduct=1000
>usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-8: Product: Flash Voyager
>usb 1-8: Manufacturer: Corsair
>usb 1-8: SerialNumber: AA04012700008792
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0008
>hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 3-0:1.0: state 7 ports 2 chg 0002 evt 0000
>hub 3-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
>drivers/usb/core/inode.c: creating file '001'
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-0.352.rc7.git1.fc10.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>drivers/usb/core/inode.c: creating file '005'
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: detected 2 ports
>uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>uhci_hcd 0000:00:1d.3: Performing full reset
>uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
>usb usb5: default language 0x0409
>usb usb5: uevent
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>usb 5-0:1.0: uevent
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: individual port over-current protection
>hub 5-0:1.0: power on to power good time: 2ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>uhci_hcd 0000:00:1d.3: port 2 portsc 0082,00
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: uevent
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>usb 3-1:1.0: uevent
>usb 3-1: adding 3-1:1.1 (config #1, interface 1)
>usb 3-1:1.1: uevent
>usb 3-1: adding 3-1:1.2 (config #1, interface 2)
>usb 3-1:1.2: uevent
>drivers/usb/core/inode.c: creating file '002'
>usb 3-1: New USB device found, idVendor=413c, idProduct=8103
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>drivers/usb/core/inode.c: creating file '001'
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-0.352.rc7.git1.fc10.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 8:778:151
>bdi 1:3: hash matches
>debug: unmapping init memory c0867000..c09de000
>Write protecting the kernel read-only data: 1256k
>Marking TSC unstable due to TSC halts in idle
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
>Clocksource tsc unstable (delta = -283783751 ns)
>usb usb2: suspend_rh (auto-stop)
>plymouthd used greatest stack depth: 2580 bytes left
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:01:00.0: setting latency timer to 64
>[drm] Detected VRAM RAM=131072K, accessible=131072K, BAR=131072K
>[drm] Panel ID String: J9662171WU1
>           
>[drm] Panel Size 1920x1200
>usb usb4: suspend_rh (auto-stop)
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:01:00.0: VGA-1: no EDID data
>usb usb5: suspend_rh (auto-stop)
>allocated de3d40c0 1920x1200 fb: 0x00048000, bo ddece380
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 240x75
>[drm] LVDS-8: set mode  9
>[drm] bios LVDS_GEN_CNTL: 0x30ff24
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Loading R300 Microcode
>[drm] Num pipes: 1
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>modprobe used greatest stack depth: 1648 bytes left
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend
>usb usb2: suspend_rh
>hub 4-0:1.0: hub_suspend
>usb usb4: bus auto-suspend
>usb usb4: suspend_rh
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend
>usb usb5: suspend_rh
>Initializing USB Mass Storage driver...
>usb-storage 1-8:1.0: usb_probe_interface
>usb-storage 1-8:1.0: usb_probe_interface - got id
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Corsair  Flash Voyager    1100 PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: [sdb] 32112640 512-byte hardware sectors (16442 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] 32112640 512-byte hardware sectors (16442 MB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1222816092.772:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 105460 rules.
>SELinux: 8192 avtab hash slots, 105460 rules.
>SELinux:  8 users, 11 roles, 2449 types, 119 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 105460 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1222816094.167:3): policy loaded auid=4294967295 ses=4294967295
>mount used greatest stack depth: 1560 bytes left
>awk used greatest stack depth: 1436 bytes left
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb usb3: uevent
>usb 3-0:1.0: uevent
>usb 3-1: uevent
>usb 3-1:1.0: uevent
>usb 3-1:1.1: uevent
>usb 3-1:1.2: uevent
>usb usb4: uevent
>usb 4-0:1.0: uevent
>usb usb5: uevent
>usb 5-0:1.0: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 1-8: uevent
>usb 1-8:1.0: uevent
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:21/device:22/input/input7
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>Bluetooth: Core ver 2.13
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.3
>btusb 3-1:1.0: usb_probe_interface
>btusb 3-1:1.0: usb_probe_interface - got id
>btusb 3-1:1.2: usb_probe_interface
>btusb 3-1:1.2: usb_probe_interface - got id
>usbcore: registered new interface driver btusb
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:0189]
>ieee80211_crypt: registered algorithm 'NULL'
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>b44 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>b44.c:v2.0
>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:12:3f:d7:5e:67
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>intel8x0_measure_ac97_clock: measured 50886 usecs
>intel8x0: clocking to 48000
>sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 17)
>sdhci-pci 0000:03:01.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0
>mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
>firewire_ohci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>modprobe used greatest stack depth: 1128 bytes left
>firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>firmware: requesting ipw2200-bss.fw
>ALSA sound/pci/ac97/ac97_codec.c:2154: MC'97 1 converters and GPIO not ready (0xff00)
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>firewire_core: created device fw0: GUID 424fc0000562d830, S400
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels)
>udev: renamed network interface eth1 to eth0
>udev: renamed network interface eth0_rename to eth1
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1015800k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:1015800k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>firmware: requesting intel-ucode/06-0d-08
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.11
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>uhci_hcd 0000:00:1d.1: reserve dev 2 ep81-INT, period 1, phase 0, 23 us
>b44: eth1: BUG!  Timeout waiting for bit 00000002 of register 42c to clear.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ipw2200: Failed to send ASSOCIATE: Already sending a command.
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.10
>b44: eth1: Link is up at 100 Mbps, full duplex.
>b44: eth1: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth0: no IPv6 routers present
>mtrr: base(0xd253a000) is not aligned on a size(0xe10000) boundary
>eth1: no IPv6 routers present
>hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0002
>ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
>hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
>ehci_hcd 0000:00:1d.7: port 1 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
>usb 1-1: new high speed USB device using ehci_hcd and address 4
>ehci_hcd 0000:00:1d.7: port 1 high speed
>ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
>usb 1-1: default language 0x0409
>usb 1-1: uevent
>usb 1-1: usb_probe_device
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: adding 1-1:1.0 (config #1, interface 0)
>usb 1-1:1.0: uevent
>usb-storage 1-1:1.0: usb_probe_interface
>usb-storage 1-1:1.0: usb_probe_interface - got id
>scsi3 : SCSI emulation for USB Mass Storage devices
>drivers/usb/core/inode.c: creating file '004'
>usb 1-1: New USB device found, idVendor=1976, idProduct=6025
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1: Product: Flash Disk
>usb 1-1: Manufacturer: 
>usb 1-1: SerialNumber: 0616030042501306
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>b44: eth1: Link is down.
>b44: eth1: Link is up at 100 Mbps, full duplex.
>b44: eth1: Flow control is off for TX and off for RX.
>usb-storage: device scan complete
>scsi 3:0:0:0: Direct-Access              Flash Disk       5.00 PQ: 0 ANSI: 2
>sd 3:0:0:0: [sdc] 128896 512-byte hardware sectors (66 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08
>sd 3:0:0:0: [sdc] Assuming drive cache: write through
>sd 3:0:0:0: [sdc] 128896 512-byte hardware sectors (66 MB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08
>sd 3:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI removable disk
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 464860: 318146 | 318147 | 318148 | 318149