Attachment 318192 Details for Bug 464921 – dmesg after boot with display stuck at 640x480

dmesg after boot with display stuck at 640x480

dmesg.out (text/plain), 28.86 KB, created by Jeff Layton on 2008-10-01 13:33:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Layton

Created: 2008-10-01 13:33:04 UTC

Size: 28.86 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-0.370.rc8.fc10.i686 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20080917 (Red Hat 4.3.2-4) (GCC) ) #1 SMP Mon Sep 29 23:46:15 EDT 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000057ea0000 (usable)
> BIOS-e820: 0000000057ea0000 - 0000000057eac000 (ACPI data)
> BIOS-e820: 0000000057eac000 - 0000000057f00000 (ACPI NVS)
> BIOS-e820: 0000000057f00000 - 0000000060000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>last_pfn = 0x57ea0 max_arch_pfn = 0x100000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>kernel direct mapping tables up to 38000000 @ 7000-c000
>Using x86 segment limits to approximate NX protection
>RAMDISK: 37cf7000 - 37fef2b9
>DMI present.
>ACPI: RSDP 000F7C20, 0014 (r0 PTLTD )
>ACPI: RSDT 57EA3EF4, 0034 (r1 PTLTD    RSDT    6040000  LTP        0)
>ACPI: FACP 57EABE1A, 0074 (r1 HP     Piranha   6040000 ATI     F4240)
>ACPI: DSDT 57EA3F28, 7EF2 (r1     HP     309B  6040000 MSFT  100000E)
>ACPI: FACS 57EACFC0, 0040
>ACPI: SSDT 57EABE8E, 00F0 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ACPI: APIC 57EABF7E, 0046 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 57EABFC4, 003C (r1 HP     PORSCHE   6040000 LOHR        0)
>ACPI: DMI detected: Hewlett-Packard
>510MB HIGHMEM available.
>896MB LOWMEM available.
>  mapped low ram: 0 - 38000000
>  low ram: 00000000 - 38000000
>  bootmap 00008000 - 0000f000
>(9 early reservations) ==> bootmem [0000000000 - 0038000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000ef81cc]    TEXT DATA BSS ==> [0000400000 - 0000ef81cc]
>  #4 [0037cf7000 - 0037fef2b9]          RAMDISK ==> [0037cf7000 - 0037fef2b9]
>  #5 [0000ef9000 - 0000f0f000]    INIT_PG_TABLE ==> [0000ef9000 - 0000f0f000]
>  #6 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>found SMP MP-table at [c00f7c50] 000f7c50
>Reserving 128MB of memory at 16MB for crashkernel (System RAM: 1406MB)
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x00038000
>  HighMem  0x00038000 -> 0x00057ea0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x00057ea0
>On node 0 totalpages: 359999
>free_area_init_node: node 0, pgdat c084c800, node_mem_map c9001000
>  DMA zone: 3943 pages, LIFO batch:0
>  Normal zone: 222200 pages, LIFO batch:31
>  HighMem zone: 128932 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
>Allocating PCI resources starting at 68000000 (gap: 60000000:80000000)
>PERCPU: Allocating 1221148 bytes of per cpu data
>NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 355075
>Kernel command line: ro root=UUID=124704e0-57eb-4212-a5f6-c8b47d70cb2b rhgb crashkernel=128M@16M
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0a04000 soft=c09e4000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 1989.791 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:           4096
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 2463 kB
> per task-struct memory footprint: 1920 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1271764k/1440384k available (2984k kernel code, 167296k reserved, 1513k data, 1500k init, 522880k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc086a000 - 0xc09e1000   (1500 kB)
>      .data : 0xc06ea200 - 0xc08648e8   (1513 kB)
>      .text : 0xc0400000 - 0xc06ea200   (2984 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 32 of 32 pages preallocated
>SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.58 BogoMIPS (lpj=1989791)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 128K (64 bytes/line)
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>debug: unmapping init memory c0866000..c086a000
>ACPI: Core revision 20080609
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Mobile AMD Sempron(tm) Processor 3300+ stepping 02
>Brought up 1 CPUs
>Total of 1 processors activated (3979.58 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=608 bytes
>sizeof(dentry)=160 bytes
>sizeof(ext3inode)=860 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5296 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0 level CPU
>  groups: 0
>khelper used greatest stack depth: 3028 bytes left
>net_namespace: 912 bytes
>Booting paravirtualized kernel on bare hardware
>Time: 13:28:00  Date: 10/01/08
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 6
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>khelper used greatest stack depth: 2604 bytes left
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>PCI: 0000:00:13.0 reg 10 32bit mmio: [c0000000, c0000fff]
>PCI: 0000:00:13.1 reg 10 32bit mmio: [c0001000, c0001fff]
>PCI: 0000:00:13.2 reg 10 32bit mmio: [c0002000, c0002fff]
>pci 0000:00:13.2: supports D1
>pci 0000:00:13.2: supports D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>PCI: 0000:00:14.0 reg 10 io port: [8400, 840f]
>PCI: 0000:00:14.0 reg 14 32bit mmio: [c0003000, c00033ff]
>HPET not enabled in BIOS. You might try hpet=force boot option
>PCI: 0000:00:14.1 reg 10 io port: [8430, 8437]
>PCI: 0000:00:14.1 reg 14 io port: [8424, 8427]
>PCI: 0000:00:14.1 reg 18 io port: [8428, 842f]
>PCI: 0000:00:14.1 reg 1c io port: [8420, 8423]
>PCI: 0000:00:14.1 reg 20 io port: [8410, 841f]
>PCI: 0000:00:14.5 reg 10 32bit mmio: [c0003400, c00034ff]
>PCI: 0000:00:14.6 reg 10 32bit mmio: [c0003800, c00038ff]
>PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
>PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
>PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
>PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
>pci 0000:01:05.0: supports D1
>pci 0000:01:05.0: supports D2
>PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
>PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
>PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
>PCI: bridge 0000:00:05.0 io port: [0, fff]
>PCI: bridge 0000:00:05.0 32bit mmio: [0, fffff]
>PCI: 0000:06:02.0 reg 10 32bit mmio: [c0200000, c0201fff]
>PCI: 0000:06:06.0 reg 10 io port: [a000, a0ff]
>PCI: 0000:06:06.0 reg 14 32bit mmio: [c0202000, c02020ff]
>pci 0000:06:06.0: supports D1
>pci 0000:06:06.0: supports D2
>pci 0000:06:06.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:06:06.0: PME# disabled
>pci 0000:00:14.4: transparent bridge
>PCI: bridge 0000:00:14.4 io port: [a000, afff]
>PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:08: io resource (0x72-0x73) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xb0-0xb1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x92-0x92) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x40b-0x40b) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x4d0-0x4d1) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x4d6-0x4d6) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x870-0x87f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xc00-0xc01) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xc14-0xc14) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xc50-0xc52) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xc6c-0xc6c) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xc6f-0xc6f) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xcd4-0xcd5) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xcd6-0xcd7) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xcd8-0xcdf) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0xf40-0xf47) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:08: io resource (0x280-0x293) overlaps 0000:00:05.0 BAR 7 (0x0-0xfff), disabling
>pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
>pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:00:05.0 BAR 8 (0x0-0xfffff), disabling
>pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pci 0000:00:05.0: BAR 7: can't allocate resource
>pci 0000:00:05.0: BAR 8: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>tracer: 772 pages allocated for 65536 entries of 48 bytes
>   actual entries 65620
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:08: ioport range 0x1080-0x1080 has been reserved
>system 00:08: ioport range 0x8000-0x805f has been reserved
>system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x9000-0x9fff
>pci 0000:00:01.0:   MEM window: 0xc0100000-0xc01fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000c8000000-0x000000cfffffff
>pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:05.0:   IO window: disabled
>pci 0000:00:05.0:   MEM window: disabled
>pci 0000:00:05.0:   PREFETCH window: disabled
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
>pci 0000:00:14.4:   IO window: 0xa000-0xafff
>pci 0000:00:14.4:   MEM window: 0xc0200000-0xc02fffff
>pci 0000:00:14.4:   PREFETCH window: disabled
>pci 0000:00:05.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 io port: [9000, 9fff]
>bus: 01 index 1 mmio: [c0100000, c01fffff]
>bus: 01 index 2 mmio: [c8000000, cfffffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 mmio: [0, fff]
>bus: 02 index 1 mmio: [0, fffff]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 06 index 0 io port: [a000, afff]
>bus: 06 index 1 mmio: [c0200000, c02fffff]
>bus: 06 index 2 mmio: [0, 0]
>bus: 06 index 3 io port: [0, ffff]
>bus: 06 index 4 mmio: [0, ffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>debug: unmapping init memory f7cf7000..f7ff0000
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1222867680.179:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1464
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: MSI quirk detected; MSI disabled
>pci 0000:01:05.0: Boot video device
>pcieport-driver 0000:00:05.0: setting latency timer to 64
>pcieport-driver 0000:00:05.0: found MSI capability
>pci_express 0000:00:05.0:pcie00: allocate port service
>pci_express 0000:00:05.0:pcie01: allocate port service
>aer 0000:00:05.0:pcie01: AER service couldn't init device: no _OSC support
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (FF) as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
>ACPI: Sleep Button (FF) [SLPF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
>ACPI: Power Button (CM) [PWRB]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (0 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:14.6: PCI INT B disabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input4
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-0.370.rc8.fc10.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-0.370.rc8.fc10.i686 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-0.370.rc8.fc10.i686 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>USB Universal Host Controller Interface driver v3.0
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>  Magic number: 12:402:482
>debug: unmapping init memory c086a000..c09e1000
>Write protecting the kernel read-only data: 1256k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>[drm] Initialized drm 1.1.0 20060810
>modprobe used greatest stack depth: 2280 bytes left
>pci 0000:01:05.0: power state changed by ACPI to D0
>pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[drm] Detected VRAM RAM=131072K, accessible=131072K, BAR=131072K
>[drm] Default TV standard: NTSC
>[drm] 14.318180000 MHz TV ref clk
>[drm] Panel ID String: LPL                     
>[drm] Panel Size 1280x800
>Marking TSC unstable due to TSC halts in idle
>i2c-adapter i2c-0: unable to read EDID block.
>pci 0000:01:05.0: VGA-1: no EDID data
>allocated f6a71030 640x480 fb: 0x00040000, bo f6e57f50
>fbcon: radeondrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 80x30
>[drm] LVDS-8: set mode 640x480 a
>[drm] bios LVDS_GEN_CNTL: 0x30ff20
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Loading R300 Microcode
>[drm] Num pipes: 4
>[drm] Initialized radeon 1.29.0 20080528 on minor 0
>modprobe used greatest stack depth: 1648 bytes left
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_acpi 0000:00:14.1: setting latency timer to 64
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
>ata1.00: ATA-7: WDC WD600UE-22KVT0, 01.03K01, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>ata2.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HS00, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD600UE-22KV 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            TSSTcorp CDW/DVD TS-L462D HS00 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>modprobe used greatest stack depth: 1124 bytes left
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1404 audit(1222867688.878:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 106300 rules.
>SELinux: 8192 avtab hash slots, 106300 rules.
>SELinux:  8 users, 11 roles, 2468 types, 119 bools, 1 sens, 1024 cats
>SELinux:  73 classes, 106300 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1222867690.196:3): policy loaded auid=4294967295 ses=4294967295
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>ACPI: WMI: Mapper loaded
>b43-pci-bridge 0000:06:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>8139too Fast Ethernet driver 0.9.28
>ssb: Sonics Silicon Backplane found on PCI device 0000:06:02.0
>8139too 0000:06:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>eth0: RealTek RTL8139 at 0xf8bdc000, 00:16:d4:42:71:0c, IRQ 22
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>modprobe used greatest stack depth: 1044 bytes left
>ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ALSA sound/pci/ac97/ac97_codec.c:2154: MC'97 0 converters and GPIO not ready (0x1)
>acpi device:12: registered as cooling_device1
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0f/device:10/input/input8
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>b43-phy0: Broadcom 4318 WLAN found
>b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>phy0: Selected rate control algorithm 'pid'
>Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
>udev: renamed network interface wlan0 to eth1
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1048568k swap on /dev/mapper/rootvg-swap.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3300+ processors (1 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0xe
>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x13
>powernow-k8: ph2 null fid transition 0xc
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Clocksource tsc unstable (delta = -248209348 ns)
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Loading iSCSI transport class v2.0-870.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>Not cloning cgroup for unused subsystem ns
>mtrr: base(0xc8494000) is not aligned on a size(0x190000) boundary
>eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>input: b43-phy0 as /devices/virtual/input/input9
>firmware: requesting b43/ucode5.fw
>firmware: requesting b43/pcm5.fw
>firmware: requesting b43/b0g0initvals5.fw
>firmware: requesting b43/b0g0bsinitvals5.fw
>b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02)
>b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed in July 2008.
>b43-phy0 warning: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>Registered led device: b43-phy0::radio
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth1: authenticate with AP 00:18:c0:60:60:11
>eth1: authenticate with AP 00:18:c0:60:60:11
>eth1: authenticate with AP 00:18:c0:60:60:11
>eth1: authentication with AP 00:18:c0:60:60:11 timed out
>fuse init (API version 7.9)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: authenticate with AP 00:1a:70:fc:c4:f2
>eth1: authenticate with AP 00:1a:70:fc:c4:f2
>eth1: authenticated
>eth1: associate with AP 00:1a:70:fc:c4:f2
>eth1: RX AssocResp from 00:1a:70:fc:c4:f2 (capab=0x411 status=0 aid=2)
>eth1: associated
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 464921: 318192 | 318193 | 318194 | 319483 | 319484 | 319485