Attachment 354526 Details for Bug 513020 – syslog

syslog

syslog (text/plain), 41.65 KB, created by James Laska on 2009-07-21 16:56:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Laska

Created: 2009-07-21 16:56:20 UTC

Size: 41.65 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.31-0.81.rc3.git4.fc12.x86_64 (mockbuild@x86-6.fedora.phx.redhat.com) (gcc version 4.4.0 20090717 (Red Hat 4.4.0-14) (GCC) ) #1 SMP Mon Jul 20 19:33:59 EDT 2009
><6>Command line: initrd=/images/development-x86_64/initrd.img,images/shell.gz BOOT_IMAGE=/images/development-x86_64/vmlinuz 
><6>KERNEL supported cpus:
><6>  Intel GenuineIntel
><6>  AMD AuthenticAMD
><6>  Centaur CentaurHauls
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
><6> BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007d625000 (usable)
><6> BIOS-e820: 000000007d625000 - 000000007d6ab000 (ACPI NVS)
><6> BIOS-e820: 000000007d6ab000 - 000000007e5f8000 (usable)
><6> BIOS-e820: 000000007e5f8000 - 000000007e605000 (reserved)
><6> BIOS-e820: 000000007e605000 - 000000007e694000 (usable)
><6> BIOS-e820: 000000007e694000 - 000000007e699000 (ACPI data)
><6> BIOS-e820: 000000007e699000 - 000000007e6f2000 (ACPI NVS)
><6> BIOS-e820: 000000007e6f2000 - 000000007e6f3000 (usable)
><6> BIOS-e820: 000000007e6f3000 - 000000007e6ff000 (ACPI data)
><6> BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable)
><6> BIOS-e820: 000000007e700000 - 000000007f000000 (reserved)
><6> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><6>DMI 2.4 present.
><6>last_pfn = 0x7e700 max_arch_pfn = 0x400000000
><7>MTRR default type: uncachable
><7>MTRR fixed ranges enabled:
><7>  00000-9FFFF write-back
><7>  A0000-FFFFF uncachable
><7>MTRR variable ranges enabled:
><7>  0 base 000000000 mask F80000000 write-back
><7>  1 base 07F000000 mask FFF000000 uncachable
><7>  2 base 07E800000 mask FFF800000 uncachable
><7>  3 base 07E700000 mask FFFF00000 uncachable
><7>  4 disabled
><7>  5 disabled
><7>  6 disabled
><7>  7 disabled
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><7>original variable MTRRs
><7>reg 0, base: 0GB, range: 2GB, type WB
><7>reg 1, base: 2032MB, range: 16MB, type UC
><7>reg 2, base: 2024MB, range: 8MB, type UC
><7>reg 3, base: 2023MB, range: 1MB, type UC
><6>total RAM coverred: 2023M
><6>Found optimal setting for mtrr clean up
><6> gran_size: 64K 	chunk_size: 32M 	num_reg: 4  	lose cover RAM: 0G
><7>New variable MTRRs
><7>reg 0, base: 0GB, range: 2GB, type WB
><7>reg 1, base: 2023MB, range: 1MB, type UC
><7>reg 2, base: 2024MB, range: 8MB, type UC
><7>reg 3, base: 2032MB, range: 16MB, type UC
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><7>initial memory mapped : 0 - 20000000
><6>init_memory_mapping: 0000000000000000-000000007e700000
><7> 0000000000 - 007e600000 page 2M
><7> 007e600000 - 007e700000 page 4k
><7>kernel direct mapping tables up to 7e700000 @ 8000-c000
><6>RAMDISK: 7bfcb000 - 7d5ff450
><4>ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
><4>ACPI: RSDT 000000007e6fd038 0004C (v01 INTEL  DG965MQ  000006A3      01000013)
><4>ACPI: FACP 000000007e6fc000 00074 (v01 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: DSDT 000000007e6f7000 041AA (v01 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: FACS 000000007e699000 00040
><4>ACPI: APIC 000000007e6f6000 00078 (v01 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: WDDT 000000007e6f5000 00040 (v01 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: MCFG 000000007e6f4000 0003C (v01 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: ASF! 000000007e6f3000 000A6 (v32 INTEL  DG965MQ  000006A3 MSFT 01000013)
><4>ACPI: SSDT 000000007e698000 0020C (v01 INTEL     CpuPm 000006A3 MSFT 01000013)
><4>ACPI: SSDT 000000007e697000 00175 (v01 INTEL   Cpu0Ist 000006A3 MSFT 01000013)
><4>ACPI: SSDT 000000007e696000 00175 (v01 INTEL   Cpu1Ist 000006A3 MSFT 01000013)
><4>ACPI: SSDT 000000007e695000 00175 (v01 INTEL   Cpu2Ist 000006A3 MSFT 01000013)
><4>ACPI: SSDT 000000007e694000 00175 (v01 INTEL   Cpu3Ist 000006A3 MSFT 01000013)
><7>ACPI: Local APIC address 0xfee00000
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007e700000
><6>Bootmem setup node 0 0000000000000000-000000007e700000
><6>  NODE_DATA [000000000000a000 - 0000000000021fff]
><6>  bootmap [0000000000022000 -  0000000000031cdf] pages 10
><6>(7 early reservations) ==> bootmem [0000000000 - 007e700000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0001000000 - 0002640cd0]    TEXT DATA BSS ==> [0001000000 - 0002640cd0]
><6>  #3 [007bfcb000 - 007d5ff450]          RAMDISK ==> [007bfcb000 - 007d5ff450]
><6>  #4 [000009a800 - 0000100000]    BIOS reserved ==> [000009a800 - 0000100000]
><6>  #5 [0002641000 - 00026411a6]              BRK ==> [0002641000 - 00026411a6]
><6>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
><6>found SMP MP-table at [ffff8800000fe200] fe200
><7> [ffffea0000000000-ffffea00033fffff] PMD -> [ffff880002c00000-ffff880005ffffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000000 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00100000
><4>Movable zone start PFN for each node
><4>early_node_map[6] active PFN ranges
><4>    0: 0x00000000 -> 0x0000008f
><4>    0: 0x00000100 -> 0x0007d625
><4>    0: 0x0007d6ab -> 0x0007e5f8
><4>    0: 0x0007e605 -> 0x0007e694
><4>    0: 0x0007e6f2 -> 0x0007e6f3
><4>    0: 0x0007e6ff -> 0x0007e700
><7>On node 0 totalpages: 517522
><7>  DMA zone: 104 pages used for memmap
><7>  DMA zone: 106 pages reserved
><7>  DMA zone: 3773 pages, LIFO batch:0
><7>  DMA32 zone: 13046 pages used for memmap
><7>  DMA32 zone: 500493 pages, LIFO batch:31
><6>ACPI: PM-Timer IO Port: 0x408
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
><6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
><7>nr_irqs_gsi: 24
><6>PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
><6>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
><6>PM: Registered nosave memory: 000000007d625000 - 000000007d6ab000
><6>PM: Registered nosave memory: 000000007e5f8000 - 000000007e605000
><6>PM: Registered nosave memory: 000000007e694000 - 000000007e699000
><6>PM: Registered nosave memory: 000000007e699000 - 000000007e6f2000
><6>PM: Registered nosave memory: 000000007e6f3000 - 000000007e6ff000
><6>Allocating PCI resources starting at 7f000000 (gap: 7f000000:80f00000)
><6>NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
><6>PERCPU: Embedded 478 pages at ffff880006000000, static data 1926688 bytes
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 504266
><4>Policy zone: DMA32
><5>Kernel command line: initrd=/images/development-x86_64/initrd.img,images/shell.gz BOOT_IMAGE=/images/development-x86_64/vmlinuz 
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Initializing CPU#0
><6>Checking aperture...
><6>No AGP bridge found
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>Memory: 1963292k/2071552k available (5098k kernel code, 1464k absent, 106796k reserved, 2783k data, 3192k init)
><6>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
><6>Hierarchical RCU implementation.
><6>NR_IRQS:4352 nr_irqs:440
><4>Fast TSC calibration using PIT
><4>Detected 2399.871 MHz processor.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
><4>... MAX_LOCKDEP_SUBCLASSES:  8
><4>... MAX_LOCK_DEPTH:          48
><4>... MAX_LOCKDEP_KEYS:        8191
><4>... CLASSHASH_SIZE:          4096
><4>... MAX_LOCKDEP_ENTRIES:     16384
><4>... MAX_LOCKDEP_CHAINS:      32768
><4>... CHAINHASH_SIZE:          16384
><4> memory used by lock dependency info: 6207 kB
><4> per task-struct memory footprint: 2688 bytes
><6>allocated 20971520 bytes of page_cgroup
><6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
><7>ODEBUG: 12 of 12 active objects replaced
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.74 BogoMIPS (lpj=2399871)
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><6>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>Initializing cgroup subsys net_cls
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0x0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>mce: CPU supports 6 MCE banks
><6>CPU0: Thermal monitoring enabled (TM2)
><6>using mwait in idle threads.
><6>Performance Counters: Core2 events, Intel PMU driver.
><6>... version:                 2
><6>... bit width:               40
><6>... generic counters:        2
><6>... value mask:              000000ffffffffff
><6>... max period:              000000007fffffff
><6>... fixed-purpose counters:  3
><6>... counter mask:            0000000700000003
><6>ACPI: Core revision 20090521
><6>ftrace: converting mcount calls to 0f 1f 44 00 00
><6>ftrace: allocating 20586 entries in 81 pages
><6>Setting APIC routing to flat
><6>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
><4>lockdep: fixing up alternatives.
><6>Booting processor 1 APIC 0x1 ip 0x6000
><6>Initializing CPU#1
><6>Calibrating delay using timer specific routine.. 4799.29 BogoMIPS (lpj=2399645)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/0x1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>mce: CPU supports 6 MCE banks
><6>CPU1: Thermal monitoring enabled (TM2)
><6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
><6>CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><6>Total of 2 processors activated (9599.03 BogoMIPS).
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=104 bytes
><7>sizeof(inode)=1168 bytes
><7>sizeof(dentry)=256 bytes
><7>sizeof(ext3inode)=1584 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=9304 bytes
><7>CPU0 attaching sched-domain:
><7> domain 0: span 0-1 level MC
><7>  groups: 0 1
><7>CPU1 attaching sched-domain:
><7> domain 0: span 0-1 level MC
><7>  groups: 1 0
><6>Booting paravirtualized kernel on bare hardware
><6>regulator: core version 0.5
><4>Time: 15:26:51  Date: 07/21/09
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
><6>PCI: Not using MMCONFIG.
><6>PCI: Using configuration type 1 for base access
><4>bio: create slab <bio-0> at 0
><7>ACPI: EC: Look up EC in DSDT
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><5>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127
><5>PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
><6>PCI: Using MMCONFIG at f0000000 - f7ffffff
><6>ACPI: No dock devices found.
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>pci 0000:00:02.0: reg 10 32bit mmio: [0x90300000-0x903fffff]
><7>pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
><7>pci 0000:00:02.0: reg 20 io port: [0x3410-0x3417]
><7>pci 0000:00:02.1: reg 10 32bit mmio: [0x90200000-0x902fffff]
><7>pci 0000:00:03.0: reg 10 64bit mmio: [0x90426100-0x9042610f]
><6>pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:03.0: PME# disabled
><7>pci 0000:00:19.0: reg 10 32bit mmio: [0x90400000-0x9041ffff]
><7>pci 0000:00:19.0: reg 14 32bit mmio: [0x90424000-0x90424fff]
><7>pci 0000:00:19.0: reg 18 io port: [0x30e0-0x30ff]
><6>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:19.0: PME# disabled
><7>pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
><7>pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
><7>pci 0000:00:1a.7: reg 10 32bit mmio: [0x90425c00-0x90425fff]
><6>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1a.7: PME# disabled
><7>pci 0000:00:1b.0: reg 10 64bit mmio: [0x90420000-0x90423fff]
><6>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1b.0: PME# disabled
><6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1c.0: PME# disabled
><6>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1c.1: PME# disabled
><6>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1c.2: PME# disabled
><6>pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1c.3: PME# disabled
><6>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1c.4: PME# disabled
><7>pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
><7>pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
><7>pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
><7>pci 0000:00:1d.7: reg 10 32bit mmio: [0x90425800-0x90425bff]
><6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
><6>pci 0000:00:1d.7: PME# disabled
><6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
><6>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
><6>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
><7>pci 0000:00:1f.2: reg 10 io port: [0x3408-0x340f]
><7>pci 0000:00:1f.2: reg 14 io port: [0x341c-0x341f]
><7>pci 0000:00:1f.2: reg 18 io port: [0x3400-0x3407]
><7>pci 0000:00:1f.2: reg 1c io port: [0x3418-0x341b]
><7>pci 0000:00:1f.2: reg 20 io port: [0x3020-0x303f]
><7>pci 0000:00:1f.2: reg 24 32bit mmio: [0x90425000-0x904257ff]
><6>pci 0000:00:1f.2: PME# supported from D3hot
><6>pci 0000:00:1f.2: PME# disabled
><7>pci 0000:00:1f.3: reg 10 32bit mmio: [0x90426000-0x904260ff]
><7>pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f]
><7>pci 0000:02:00.0: reg 10 io port: [0x2018-0x201f]
><7>pci 0000:02:00.0: reg 14 io port: [0x2024-0x2027]
><7>pci 0000:02:00.0: reg 18 io port: [0x2010-0x2017]
><7>pci 0000:02:00.0: reg 1c io port: [0x2020-0x2023]
><7>pci 0000:02:00.0: reg 20 io port: [0x2000-0x200f]
><7>pci 0000:02:00.0: reg 24 32bit mmio: [0x90100000-0x901001ff]
><7>pci 0000:02:00.0: supports D1
><6>pci 0000:02:00.0: PME# supported from D0 D1 D3hot
><6>pci 0000:02:00.0: PME# disabled
><6>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
><7>pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
><7>pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
><7>pci 0000:06:01.0: reg 10 32bit mmio: [0x90020000-0x9003ffff]
><7>pci 0000:06:01.0: reg 14 32bit mmio: [0x90000000-0x9001ffff]
><7>pci 0000:06:01.0: reg 18 io port: [0x1000-0x103f]
><7>pci 0000:06:01.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
><6>pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
><6>pci 0000:06:01.0: PME# disabled
><7>pci 0000:06:03.0: reg 10 32bit mmio: [0x90044000-0x900447ff]
><7>pci 0000:06:03.0: reg 14 32bit mmio: [0x90040000-0x90043fff]
><7>pci 0000:06:03.0: supports D1 D2
><6>pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot
><6>pci 0000:06:03.0: PME# disabled
><6>pci 0000:00:1e.0: transparent bridge
><7>pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff]
><7>pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
><6>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
><6>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
><6>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
><6>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
><6>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
><6>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
><6>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
><6>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><7>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
><7>PCI: pci_cache_line_size set to 4 bytes
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>DMA-API: preallocated 32768 debug entries
><6>DMA-API: debugging enabled by kernel config
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><6>pnp: PnP ACPI: found 11 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
><6>system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
><6>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
><6>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
><6>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
><6>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
><6>system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
><6>system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved
><6>system 00:01: iomem range 0xc0000-0xdffff has been reserved
><6>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
><6>system 00:06: ioport range 0x500-0x53f has been reserved
><6>system 00:06: ioport range 0x400-0x47f has been reserved
><6>system 00:06: ioport range 0x680-0x6ff has been reserved
><6>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:1c.0:   IO window: disabled
><6>pci 0000:00:1c.0:   MEM window: disabled
><6>pci 0000:00:1c.0:   PREFETCH window: disabled
><6>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
><6>pci 0000:00:1c.1:   IO window: 0x2000-0x2fff
><6>pci 0000:00:1c.1:   MEM window: 0x90100000-0x901fffff
><6>pci 0000:00:1c.1:   PREFETCH window: disabled
><6>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
><6>pci 0000:00:1c.2:   IO window: disabled
><6>pci 0000:00:1c.2:   MEM window: disabled
><6>pci 0000:00:1c.2:   PREFETCH window: disabled
><6>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
><6>pci 0000:00:1c.3:   IO window: disabled
><6>pci 0000:00:1c.3:   MEM window: disabled
><6>pci 0000:00:1c.3:   PREFETCH window: disabled
><6>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:05
><6>pci 0000:00:1c.4:   IO window: disabled
><6>pci 0000:00:1c.4:   MEM window: disabled
><6>pci 0000:00:1c.4:   PREFETCH window: disabled
><6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
><6>pci 0000:00:1e.0:   IO window: 0x1000-0x1fff
><6>pci 0000:00:1e.0:   MEM window: 0x90000000-0x900fffff
><6>pci 0000:00:1e.0:   PREFETCH window: disabled
><7>  alloc irq_desc for 17 on node 0
><7>  alloc kstat_irqs on node 0
><6>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
><7>pci 0000:00:1c.0: setting latency timer to 64
><7>  alloc irq_desc for 16 on node 0
><7>  alloc kstat_irqs on node 0
><6>pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
><7>pci 0000:00:1c.1: setting latency timer to 64
><7>  alloc irq_desc for 18 on node 0
><7>  alloc kstat_irqs on node 0
><6>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
><7>pci 0000:00:1c.2: setting latency timer to 64
><7>  alloc irq_desc for 19 on node 0
><7>  alloc kstat_irqs on node 0
><6>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
><7>pci 0000:00:1c.3: setting latency timer to 64
><6>pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
><7>pci 0000:00:1c.4: setting latency timer to 64
><7>pci 0000:00:1e.0: setting latency timer to 64
><7>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
><7>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
><7>pci_bus 0000:02: resource 0 io:  [0x2000-0x2fff]
><7>pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
><7>pci_bus 0000:06: resource 0 io:  [0x1000-0x1fff]
><7>pci_bus 0000:06: resource 1 mem: [0x90000000-0x900fffff]
><7>pci_bus 0000:06: resource 3 io:  [0x00-0xffff]
><7>pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
><6>TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
><6>TCP: Hash tables configured (established 262144 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Trying to unpack rootfs image as initramfs...
><7>Switched to high resolution mode on CPU 1
><7>Switched to high resolution mode on CPU 0
><6>Freeing initrd memory: 22737k freed
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1248190011.878:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.2
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 3878
><7>SELinux:  Registering netfilter hooks
><4>cryptomgr_test used greatest stack depth: 5856 bytes left
><4>cryptomgr_test used greatest stack depth: 5456 bytes left
><6>alg: No test for stdrng (krng)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>pci 0000:00:02.0: Boot video device
><7>  alloc irq_desc for 24 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
><7>pcieport-driver 0000:00:1c.0: setting latency timer to 64
><7>  alloc irq_desc for 25 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
><7>pcieport-driver 0000:00:1c.1: setting latency timer to 64
><7>  alloc irq_desc for 26 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X
><7>pcieport-driver 0000:00:1c.2: setting latency timer to 64
><7>  alloc irq_desc for 27 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
><7>pcieport-driver 0000:00:1c.3: setting latency timer to 64
><7>  alloc irq_desc for 28 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X
><7>pcieport-driver 0000:00:1c.4: setting latency timer to 64
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
><6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
><4>acpiphp_glue: can't get bus number, assuming 0
><6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
><6>ACPI: Power Button [PWRF]
><6>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
><6>ACPI: Sleep Button [SLPB]
><6>processor LNXCPU:00: registered as cooling_device0
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>processor LNXCPU:01: registered as cooling_device1
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>Non-volatile memory driver v1.3
><6>Linux agpgart interface v0.103
><6>agpgart-intel 0000:00:00.0: Intel 965G Chipset
><6>agpgart-intel 0000:00:00.0: detected 7676K stolen memory
><6>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
><4>work_for_cpu used greatest stack depth: 5376 bytes left
><6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>Platform driver 'serial8250' needs updating - please use dev_pm_ops
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>brd: module loaded
><6>loop: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input2
><7>ahci 0000:00:1f.2: version 3.0
><6>ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
><7>  alloc irq_desc for 29 on node 0
><7>  alloc kstat_irqs on node 0
><7>ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems 
><7>ahci 0000:00:1f.2: setting latency timer to 64
><6>scsi0 : ahci
><6>scsi1 : ahci
><6>scsi2 : ahci
><6>scsi3 : ahci
><6>scsi4 : ahci
><6>scsi5 : ahci
><6>ata1: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425100 irq 29
><6>ata2: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425180 irq 29
><6>ata3: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425200 irq 29
><6>ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29
><6>ata5: SATA max UDMA/133 abar m2048@0x90425000 port 0x90425300 irq 29
><6>ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29
><4>work_for_cpu used greatest stack depth: 4864 bytes left
><6>Fixed MDIO Bus: probed
><6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
><6>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
><7>ehci_hcd 0000:00:1a.7: setting latency timer to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1a.7: debug port 1
><7>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90425c00
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:1a.7
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><4>work_for_cpu used greatest stack depth: 3856 bytes left
><7>  alloc irq_desc for 23 on node 0
><7>  alloc kstat_irqs on node 0
><6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
><7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90425800
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: EHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 ehci_hcd
><6>usb usb2: SerialNumber: 0000:00:1d.7
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 6 ports detected
><6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
><6>uhci_hcd: USB Universal Host Controller Interface driver
><6>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
><7>uhci_hcd 0000:00:1a.0: setting latency timer to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
><6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb3: Product: UHCI Host Controller
><6>usb usb3: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 uhci_hcd
><6>usb usb3: SerialNumber: 0000:00:1a.0
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><7>  alloc irq_desc for 21 on node 0
><7>  alloc kstat_irqs on node 0
><6>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
><7>uhci_hcd 0000:00:1a.1: setting latency timer to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
><6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb4: Product: UHCI Host Controller
><6>usb usb4: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 uhci_hcd
><6>usb usb4: SerialNumber: 0000:00:1a.1
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
><7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
><6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb5: Product: UHCI Host Controller
><6>usb usb5: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 uhci_hcd
><6>usb usb5: SerialNumber: 0000:00:1d.0
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
><7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
><6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb6: Product: UHCI Host Controller
><6>usb usb6: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 uhci_hcd
><6>usb usb6: SerialNumber: 0000:00:1d.1
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
><7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
><6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb7: Product: UHCI Host Controller
><6>usb usb7: Manufacturer: Linux 2.6.31-0.81.rc3.git4.fc12.x86_64 uhci_hcd
><6>usb usb7: SerialNumber: 0000:00:1d.2
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><6>PNP: No PS/2 controller found. Probing ports directly.
><4>Platform driver 'i8042' needs updating - please use dev_pm_ops
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>rtc_cmos 00:03: RTC can wake from S4
><6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one month, 114 bytes nvram
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>usbhid: v2.6:USB HID core driver
><4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
><4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
><4>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
><4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
><6>ip_tables: (C) 2000-2006 Netfilter Core Team
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 17
><7>PM: Resume from disk failed.
><4>registered taskstats version 1
><4>  Magic number: 1:549:437
><6>rtc_cmos 00:03: setting system clock to 2009-07-21 15:26:52 UTC (1248190012)
><6>Initalizing network drop monitor service
><6>ata1: SATA link down (SStatus 0 SControl 300)
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>ata2: SATA link down (SStatus 0 SControl 300)
><6>ata3: SATA link down (SStatus 0 SControl 300)
><6>usb 4-2: new full speed USB device using uhci_hcd and address 2
><6>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata6.00: ATA-7: HDT722516DLA380, V43OA96A, max UDMA/133
><6>ata6.00: 321672960 sectors, multi 0: LBA48 NCQ (depth 31/32)
><6>ata6.00: configured for UDMA/133
><6>usb 4-2: New USB device found, idVendor=0451, idProduct=2046
><6>usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
><6>usb 4-2: configuration #1 chosen from 1 choice
><6>ata4.00: ATAPI: PLEXTOR DVDR   PX-755A, 1.02, max UDMA/66
><6>ata4.00: applying bridge limits
><6>ata4.00: configured for UDMA/66
><6>hub 4-2:1.0: USB hub found
><5>scsi 3:0:0:0: CD-ROM            PLEXTOR  DVDR   PX-755A   1.02 PQ: 0 ANSI: 5
><6>hub 4-2:1.0: 4 ports detected
><4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 3:0:0:0: Attached scsi CD-ROM sr0
><5>sr 3:0:0:0: Attached scsi generic sg0 type 5
><5>scsi 5:0:0:0: Direct-Access     ATA      HDT722516DLA380  V43O PQ: 0 ANSI: 5
><5>sd 5:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
><5>sd 5:0:0:0: Attached scsi generic sg1 type 0
><5>sd 5:0:0:0: [sda] Write Protect is off
><7>sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2
><5>sd 5:0:0:0: [sda] Attached SCSI disk
><6>Freeing unused kernel memory: 3192k freed
><6>Write protecting the kernel read-only data: 7280k
><6>usb 4-2.1: new full speed USB device using uhci_hcd and address 3
><6>usb 4-2.1: New USB device found, idVendor=0557, idProduct=2205
><6>usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
><6>usb 4-2.1: Product: 4 Port USB KVM B V1.80
><6>usb 4-2.1: Manufacturer: ATEN
><6>usb 4-2.1: configuration #1 chosen from 1 choice
><6>input: ATEN 4 Port USB KVM B V1.80 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.0/input/input3
><6>generic-usb 0003:0557:2205.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN 4 Port USB KVM B V1.80] on usb-0000:00:1a.1-2.1/input0
><6>input: ATEN 4 Port USB KVM B V1.80 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2.1/4-2.1:1.1/input/input4
><6>generic-usb 0003:0557:2205.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN 4 Port USB KVM B V1.80] on usb-0000:00:1a.1-2.1/input1
><4>Platform driver 'floppy' needs updating - please use dev_pm_ops
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><4>Platform driver 'pcspkr' needs updating - please use dev_pm_ops
><6>input: PC Speaker as /devices/platform/pcspkr/input/input5
><6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
><6>Loading iSCSI transport class v2.0-870.
><5>iscsi: registered transport (tcp)
><6>No iBFT detected.
><6>[drm] Initialized drm 1.1.0 20060810
><6>firewire_ohci 0000:06:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
><6>e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
><6>e1000e: Copyright (c) 1999-2008 Intel Corporation.
><7>  alloc irq_desc for 20 on node 0
><7>  alloc kstat_irqs on node 0
><6>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
><7>e1000e 0000:00:19.0: setting latency timer to 64
><7>  alloc irq_desc for 30 on node 0
><7>  alloc kstat_irqs on node 0
><7>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
><27>Jul 21 15:26:58 udevd-work[144]: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
>
><5>firewire_ohci: Added fw-ohci device 0000:06:03.0, OHCI version 1.10
><6>Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
><6>Copyright (c) 1999-2006 Intel Corporation.
><6>pata_marvell 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
><7>  alloc irq_desc for 22 on node 0
><7>  alloc kstat_irqs on node 0
><6>e1000 0000:06:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
><7>pata_marvell 0000:02:00.0: setting latency timer to 64
><6>e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:b3:04:f3
><6>scsi6 : pata_marvell
><6>scsi7 : pata_marvell
><6>ata7: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 17
><6>ata8: DUMMY
><6>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:d6:c2:cd
><6>0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
><6>0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
><6>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
><7>i915 0000:00:02.0: setting latency timer to 64
><7>  alloc irq_desc for 31 on node 0
><7>  alloc kstat_irqs on node 0
><7>i915 0000:00:02.0: irq 31 for MSI/MSI-X
><5>firewire_core: created device fw0: GUID 0090270001b48cfe, S400
><6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
><3>[drm:edid_is_valid] *ERROR* EDID has major version 129, instead of 1
><3>[drm:edid_is_valid] *ERROR* Raw EDID:
><7><3>00 ff ff ff ff ff ff 00 04 72 af 48 cb 3c 00 00  .........r.H.<..
><7><3>2d 10 81 03 68 30 1e 78 2e 93 45 a3 55 4a 98 27  -...h0.x..E.UJ.'
><7><3>95 50 54 bf ef 80 b3 00 a9 40 95 00 91 40 8b c0  .PT......@...@..
><7><3>01 01 01 01 01 01 34 3a 90 30 62 1a 27 40 68 b0  ......4:.0b.'@h.
><7><3>36 00 da 28 11 00 00 1c 00 00 00 fd 00 38 4c 1f  6..(.........8L.
><7><3>52 0f 00 4a 20 20 20 20 20 20 00 01 01 fc 00 41  R..J      .....A
><7><3>4c 32 32 32 33 57 0a 20 20 20 20 20 04 00 00 fe  L2223W.     ....
><7><3>00 41 43 45 52 0e 20 20 60 20 20 20 20 20 00 64  .ACER.  `     .d
><4>
><4>i915 0000:00:02.0: VGA-1: EDID invalid.
><3>[drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes
><4>Console: switching to colour frame buffer device 100x37
><6>[drm] DAC-6: set mode 800x600 c
><6>[drm] fb0: inteldrmfb frame buffer device
><6>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
><4>work_for_cpu used greatest stack depth: 3488 bytes left
><29>Jul 21 15:26:59 NetworkManager: <info>  starting...
>
><29>Jul 21 15:26:59 NetworkManager: <info>  Waiting for HAL to start...
>
><28>Jul 21 15:26:59 NetworkManager: <WARN>  nm_generic_enable_loopback(): error -17 returned from rtnl_addr_add():
>Sucess
>
>
><29>Jul 21 15:26:59 NetworkManager: <info>  Trying to start the supplicant...
>
><29>Jul 21 15:26:59 NetworkManager: <info>  Trying to start the system settings daemon...
>
><29>Jul 21 15:27:00 NetworkManager: <info>  HAL re-appeared
>
><29>Jul 21 15:27:00 NetworkManager: <info>  (eth1): new Ethernet device (driver: 'e1000')
>
><29>Jul 21 15:27:00 NetworkManager: <info>  (eth1): exported as /org/freedesktop/Hal/devices/net_00_0e_0c_b3_04_f3
>
><29>Jul 21 15:27:00 NetworkManager: <info>  (eth0): new Ethernet device (driver: 'e1000e')
>
><29>Jul 21 15:27:00 NetworkManager: <info>  (eth0): exported as /org/freedesktop/Hal/devices/net_00_16_76_d6_c2_cd
>
><29>Jul 21 15:27:04 NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
>
><29>Jul 21 15:27:04 NetworkManager: <info>  (eth1): bringing up device.
>
><29>Jul 21 15:27:04 NetworkManager: <info>  (eth1): preparing device.
>
><29>Jul 21 15:27:04 NetworkManager: <info>  (eth1): deactivating device (reason: 2).
>
><29>Jul 21 15:27:05 NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
>
><29>Jul 21 15:27:05 NetworkManager: <info>  (eth0): bringing up device.
>
><7>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
><7>e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
><29>Jul 21 15:27:05 NetworkManager: <info>  (eth0): preparing device.
>
><29>Jul 21 15:27:05 NetworkManager: <info>  (eth0): deactivating device (reason: 2).
>
><6>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
><6>0000:00:19.0: eth0: 10/100 speed: disabling TSO
><29>Jul 21 15:27:06 NetworkManager: <info>  (eth0): carrier now ON (device state 2)
>
><29>Jul 21 15:27:06 NetworkManager: <info>  (eth0): device state change: 2 -> 3 (reason 40)
>
><29>Jul 21 15:29:00 NetworkManager: <info>  Trying to start the supplicant...
>
><29>Jul 21 15:29:00 NetworkManager: <info>  Trying to start the system settings daemon...
>
><4>EXT4-fs (hank.test.redhat.com:/mnt/qa/scratch): Update your userspace programs to mount using ext4
><4>EXT4-fs (hank.test.redhat.com:/mnt/qa/scratch): ext4dev backwards compatibility will go away by 2.6.31
><29>Jul 21 15:31:00 NetworkManager: <info>  Trying to start the supplicant...
>
><29>Jul 21 15:31:00 NetworkManager: <info>  Trying to start the system settings daemon...
>
><6>usb 2-5: new high speed USB device using ehci_hcd and address 2
><6>usb 2-5: New USB device found, idVendor=0781, idProduct=5406
><6>usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
><6>usb 2-5: Product: U3 Cruzer Micro
><6>usb 2-5: Manufacturer: SanDisk
><6>usb 2-5: SerialNumber: 4324321B84402C8A
><6>usb 2-5: configuration #1 chosen from 1 choice
><6>Initializing USB Mass Storage driver...
><6>scsi8 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device scan complete
><5>scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0 CCS
><5>scsi 8:0:0:1: CD-ROM            SanDisk  Cruzer           8.02 PQ: 0 ANSI: 0
><5>sd 8:0:0:0: Attached scsi generic sg2 type 0
><5>sd 8:0:0:0: [sdb] 7864319 512-byte logical blocks: (4.02 GB/3.74 GiB)
><5>sd 8:0:0:0: [sdb] Write Protect is off
><7>sd 8:0:0:0: [sdb] Mode Sense: 45 00 00 08
><3>sd 8:0:0:0: [sdb] Assuming drive cache: write through
><4>sr1: scsi3-mmc drive: 48x/48x tray
><7>sr 8:0:0:1: Attached scsi CD-ROM sr1
><5>sr 8:0:0:1: Attached scsi generic sg3 type 5
><3>sd 8:0:0:0: [sdb] Assuming drive cache: write through
><6> sdb: sdb1
><3>sd 8:0:0:0: [sdb] Assuming drive cache: write through
><5>sd 8:0:0:0: [sdb] Attached SCSI removable disk
><4>EXT4-fs (/dev/sdb1): Update your userspace programs to mount using ext4
><4>EXT4-fs (/dev/sdb1): ext4dev backwards compatibility will go away by 2.6.31

Actions: View

Attachments on bug 513020: 354523 | 354525 | 354526