Attachment 358844 Details for Bug 519515 – dmesg log, for debugging purposes.

dmesg log, for debugging purposes.

dmesg (text/plain), 28.85 KB, created by David Le Sage on 2009-08-27 10:48:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Le Sage

Created: 2009-08-27 10:48:50 UTC

Size: 28.85 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31-0.125.4.2.rc5.git2.fc12.i686.PAE (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.4.1 20090807 (Red Hat 4.4.1-5) (GCC) ) #1 SMP Tue Aug 11 21:01:03 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
> BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x1fffc max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 0E8000000 mask FFC000000 write-combining
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-000000001fffc000
>Using x86 segment limits to approximate NX protection
> 0000000000 - 0000200000 page 4k
> 0000200000 - 001fe00000 page 2M
> 001fe00000 - 001fffc000 page 4k
>kernel direct mapping tables up to 1fffc000 @ 7000-f000
>RAMDISK: 1fd12000 - 1ffebe75
>ACPI: RSDP 000f6840 00014 (v00 ASUS  )
>ACPI: RSDT 1fffc000 00030 (v01 ASUS   P4S333   42302E31 MSFT 31313031)
>ACPI: FACP 1fffc100 00074 (v01 ASUS   P4S333   42302E31 MSFT 31313031)
>ACPI: DSDT 1fffc180 0255D (v01   ASUS P4S333   00001000 MSFT 0100000B)
>ACPI: FACS 1ffff000 00040
>ACPI: BOOT 1fffc040 00028 (v01 ASUS   P4S333   42302E31 MSFT 31313031)
>ACPI: APIC 1fffc080 0005A (v01 ASUS   P4S333   42302E31 MSFT 31313031)
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>511MB LOWMEM available.
>  mapped low ram: 0 - 1fffc000
>  low ram: 0 - 1fffc000
>  node 0 low ram: 00000000 - 1fffc000
>  node 0 bootmap 00002000 - 00006000
>(9 early reservations) ==> bootmem [0000000000 - 001fffc000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00012d833c]    TEXT DATA BSS ==> [0000400000 - 00012d833c]
>  #4 [001fd12000 - 001ffebe75]          RAMDISK ==> [001fd12000 - 001ffebe75]
>  #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #6 [00012d9000 - 00012e5148]              BRK ==> [00012d9000 - 00012e5148]
>  #7 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 - 0000006000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0001fffc
>  HighMem  0x0001fffc -> 0x0001fffc
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0001fffc
>On node 0 totalpages: 130971
>free_area_init_node: node 0, pgdat c0a368c0, node_mem_map c12e6000
>  DMA zone: 60 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3939 pages, LIFO batch:0
>  Normal zone: 1860 pages used for memmap
>  Normal zone: 125112 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 335 pages at c1a6d000, static data 1348956 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129051
>Kernel command line: ro root=UUID=da8872d3-1ba4-4fd3-8613-64455e081f35 rhgb quiet LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 2621360 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 493516k/524272k available (4320k kernel code, 30224k reserved, 2384k data, 1776k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xe07fc000 - 0xff5fe000   ( 494 MB)
>    lowmem  : 0xc0000000 - 0xdfffc000   ( 511 MB)
>      .init : 0xc0a94000 - 0xc0c50000   (1776 kB)
>      .data : 0xc0838367 - 0xc0a8c598   (2384 kB)
>      .text : 0xc0400000 - 0xc0838367   (4320 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Fast TSC calibration failed
>TSC: Unable to calibrate against PIT
>TSC: using PMTIMER reference calibration
>Detected 1715.237 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:  8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:          4096
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 3743 kB
> per task-struct memory footprint: 1920 bytes
>ODEBUG: 9 of 9 active objects replaced
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3430.47 BogoMIPS (lpj=1715237)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Performance Counters: no PMU driver, software counters only.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20653 entries in 41 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
>Brought up 1 CPUs
>Total of 1 processors activated (3430.47 BogoMIPS).
>sizeof(vma)=88 bytes
>sizeof(page)=60 bytes
>sizeof(inode)=652 bytes
>sizeof(dentry)=164 bytes
>sizeof(ext3inode)=912 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=192 bytes
>sizeof(task_struct)=5512 bytes
>CPU0 attaching NULL sched-domain.
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time:  8:49:44  Date: 08/27/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf15b0, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xebffffff]
>pci 0000:00:02.0: Enabling SiS 96x SMBus
>pci 0000:00:02.1: reg 20 io port: [0xe600-0xe61f]
>pci 0000:00:02.2: reg 10 32bit mmio: [0xe6800000-0xe6800fff]
>pci 0000:00:02.3: reg 10 32bit mmio: [0xe6000000-0xe6000fff]
>pci 0000:00:02.5: reg 20 io port: [0xd800-0xd80f]
>pci 0000:00:05.0: reg 10 io port: [0xa800-0xa8ff]
>pci 0000:00:05.0: supports D1 D2
>pci 0000:00:0a.0: reg 10 io port: [0xa400-0xa47f]
>pci 0000:00:0a.0: reg 14 32bit mmio: [0xe5000000-0xe500007f]
>pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:00:0a.0: supports D1 D2
>pci 0000:00:0a.0: PME# supported from D1 D2 D3hot
>pci 0000:00:0a.0: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xe7000000-0xe7ffffff]
>pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xefff0000-0xefffffff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xe7000000-0xe7ffffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xeff00000-0xfebfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 4 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMA-API: preallocated 32768 debug entries
>DMA-API: debugging enabled by kernel config
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved
>system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
>system 00:02: ioport range 0xe400-0xe47f has been reserved
>system 00:02: ioport range 0xe480-0xe4ff has been reserved
>system 00:02: ioport range 0xe600-0xe61f has been reserved
>system 00:02: ioport range 0x480-0x48f has been reserved
>system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
>system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
>system 00:04: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0d: ioport range 0x3f0-0x3f1 has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: disabled
>pci 0000:00:01.0:   MEM window: 0xe7000000-0xe7ffffff
>pci 0000:00:01.0:   PREFETCH window: 0xeff00000-0xfebfffff
>pci 0000:00:01.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 1 mem: [0xe7000000-0xe7ffffff]
>pci_bus 0000:01: resource 2 pref mem [0xeff00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 2919k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1251362984.694:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 969
>SELinux:  Registering netfilter hooks
>cryptomgr_test used greatest stack depth: 7028 bytes left
>cryptomgr_test used greatest stack depth: 6788 bytes left
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>ACPI: Invalid PBLK length [5]
>processor LNXCPU:00: registered as cooling_device0
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-sis 0000:00:00.0: SiS chipset [1039/0645]
>agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>Platform driver 'serial8250' needs updating - please use dev_pm_ops
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:02.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.2: OHCI Host Controller
>ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.2: irq 20, io mem 0xe6800000
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: OHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-0.125.4.2.rc5.git2.fc12.i686.PAE ohci_hcd
>usb usb1: SerialNumber: 0000:00:02.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.3: OHCI Host Controller
>ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.3: irq 23, io mem 0xe6000000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-0.125.4.2.rc5.git2.fc12.i686.PAE ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.3
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>Platform driver 'i8042' needs updating - please use dev_pm_ops
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (8191 buckets, 32764 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 5:675:827
>rtc_cmos 00:06: setting system clock to 2009-08-27 08:49:46 UTC (1251362986)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1776k freed
>Write protecting the kernel text: 4324k
>Write protecting the kernel read-only data: 1780k
>plymouthd used greatest stack depth: 6720 bytes left
>modprobe used greatest stack depth: 6668 bytes left
>[drm] Initialized drm 1.1.0 20060810
>modprobe used greatest stack depth: 6644 bytes left
>modprobe used greatest stack depth: 6456 bytes left
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: Detected an NV11 generation card (0x011100b2)
>nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
>nouveau 0000:01:00.0: ... appears to be valid
>nouveau 0000:01:00.0: BMP BIOS found
>nouveau 0000:01:00.0: BMP version 5.20
>nouveau 0000:01:00.0: Bios version 03.11.01.24
>nouveau 0000:01:00.0: Found Display Configuration Block version 1.4
>nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
>nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAAD8
>nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB1B4
>nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAAF3
>nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB15B
>nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAB86
>nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xACC8
>nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xABAB
>nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAC63
>nouveau 0000:01:00.0: No pointer to output script table
>nouveau 0000:01:00.0: No pointer to output script table
>usb 1-3: new low speed USB device using ohci_hcd and address 2
>[TTM] TTM available graphics memory: 243 MiB
>[TTM] TTM available object memory: 243 MiB
>agpgart-sis 0000:00:00.0: AGP 2.0 bridge
>agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
>nouveau 0000:01:00.0: Allocating FIFO number 0
>nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 0
>nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
>nouveau 0000:01:00.0: Detected a VGA connector
>nouveau 0000:01:00.0: Detected a DVI-D connector
>nouveau 0000:01:00.0: Saving VGA fonts
>allocated 1024x768 fb: 0x49000, bo de6973b0
>fbcon: nouveaufb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
>usb 1-3: New USB device found, idVendor=045e, idProduct=00db
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3: Product: NaturalÂ® Ergonomic Keyboard 4000
>usb 1-3: Manufacturer: Microsoft
>usb 1-3: configuration #1 chosen from 1 choice
>nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
>nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 0
>nouveau 0000:01:00.0: CTRC mode on CRTC 0:
>nouveau 0000:01:00.0: Output mode on CRTC 0:
>nouveau 0000:01:00.0: vpll: n 22 m 1 log2p 2
>[drm] DAC-7: set mode 1024x768 15
>nouveau 0000:01:00.0: nv_output_mode_set called for encoder 0
>nouveau 0000:01:00.0: Setting dpms mode 0 on CRTC 0
>nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
>nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
>nouveau 0000:01:00.0: Setting dpms mode 3 on CRTC 1
>fb0: nouveaufb frame buffer device
>registered panic notifier
>input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.0/input/input3
>microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:02.2-3/input0
>[drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
>modprobe used greatest stack depth: 4572 bytes left
>input: Microsoft NaturalÂ® Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:02.2/usb1/1-3/1-3:1.1/input/input4
>microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft NaturalÂ® Ergonomic Keyboard 4000] on usb-0000:00:02.2-3/input1
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>usb 2-1: New USB device found, idVendor=0461, idProduct=4d03
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: configuration #1 chosen from 1 choice
>input: HID 0461:4d03 as /devices/pci0000:00/0000:00:02.3/usb2/2-1/2-1:1.0/input/input5
>generic-usb 0003:0461:4D03.0003: input,hidraw2: USB HID v1.00 Mouse [HID 0461:4d03] on usb-0000:00:02.3-1/input0
>usb 2-2: new full speed USB device using ohci_hcd and address 3
>usb 2-2: New USB device found, idVendor=0403, idProduct=6001
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: NetComm USB Modem
>usb 2-2: Manufacturer: NetComm
>usb 2-2: configuration #1 chosen from 1 choice
>pata_sis 0000:00:02.5: version 0.5.2
>scsi0 : pata_sis
>usb 2-3: new full speed USB device using ohci_hcd and address 4
>scsi1 : pata_sis
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
>ata1.00: ATA-5: ST340016A, 3.10, max UDMA/100
>ata1.00: 78165360 sectors, multi 16: LBA 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST340016A        3.10 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>usb 2-3: New USB device found, idVendor=043d, idProduct=0057
>usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-3: Product: Inkjet color printer
>usb 2-3: Manufacturer: Lexmark
>usb 2-3: configuration #1 chosen from 1 choice
> sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB02, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>EXT4-fs (sda1): barriers enabled
>kjournald2 starting: pid 58, dev sda1:8, commit interval 5 seconds
>EXT4-fs (sda1): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda1): mounted filesystem with ordered data mode
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1251362989.501:2): selinux=0 auid=4294967295 ses=4294967295
>udev: starting version 145
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
>3c59x 0000:00:0a.0: enabling device (0014 -> 0017)
>3c59x 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>3c59x: Donald Becker and others.
>0000:00:0a.0: 3Com PCI 3cSOHO100-TX Hurricane at e0bf6000.
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for FTDI USB Serial Device
>ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
>usb 2-2: Detected FT8U232AM
>usb 2-2: Number of endpoints 2
>usb 2-2: Endpoint 1 MaxPacketSize 64
>usb 2-2: Endpoint 2 MaxPacketSize 64
>usb 2-2: Setting MaxPacketSize 64
>------------[ cut here ]------------
>WARNING: at lib/dma-debug.c:856 check_for_stack+0x72/0xad() (Not tainted)
>Hardware name: System Name
>ohci_hcd 0000:00:02.3: DMA-API: device driver maps memory fromstack [addr=dc969a8a]
>Modules linked in: ftdi_sio(+) snd_hwdep snd_mpu401_uart usbserial joydev snd_rawmidi serio_raw snd_seq_device parport_pc parport snd 3c59x soundcore mii i2c_sis96x ata_generic pata_acpi pata_sis nouveau ttm drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan]
>Pid: 214, comm: modprobe Not tainted 2.6.31-0.125.4.2.rc5.git2.fc12.i686.PAE #1
>Call Trace:
> [<c044cc00>] warn_slowpath_common+0x7b/0xa3
> [<c0610c32>] ? check_for_stack+0x72/0xad
> [<c044cc91>] warn_slowpath_fmt+0x34/0x48
> [<c0610c32>] check_for_stack+0x72/0xad
> [<c06118a5>] debug_dma_map_page+0x145/0x16c
> [<c070eb6c>] dma_map_single_attrs.clone.2+0x7f/0x9c
> [<c070ece8>] usb_hcd_submit_urb+0x15f/0xaa3
> [<c0604cda>] ? string+0x4a/0xa4
> [<c0477ebc>] ? debug_check_no_locks_freed+0x10d/0x12f
> [<c0477d50>] ? trace_hardirqs_on_caller+0x122/0x155
> [<c0476d8c>] ? lockdep_init_map+0x96/0x112
> [<c070fbff>] usb_submit_urb+0x232/0x2a6
> [<c071106c>] usb_start_wait_urb+0x48/0x146
> [<c07100d4>] ? usb_alloc_urb+0x23/0x53
> [<c0710092>] ? usb_init_urb+0x2e/0x4d
> [<c071139e>] usb_control_msg+0xdc/0x106
> [<e1404d9a>] ftdi_sio_port_probe+0x4bf/0x581 [ftdi_sio]
> [<e0913759>] usb_serial_device_probe+0x57/0xe3 [usbserial]
> [<c06bca70>] driver_probe_device+0xca/0x1d9
> [<c06bcc40>] __device_attach+0x3d/0x53
> [<c06bbb8b>] bus_for_each_drv+0x55/0x90
> [<c06bcc03>] ? __device_attach+0x0/0x53
> [<c06bccf6>] device_attach+0x5a/0x7f
> [<c06bcc03>] ? __device_attach+0x0/0x53
> [<c06bb9a4>] bus_attach_device+0x34/0x70
> [<c06b9ecb>] device_add+0x345/0x4b3
> [<c06b96ea>] ? device_initialize+0xa2/0xd8
> [<c06ba060>] device_register+0x27/0x3c
> [<e0911b11>] usb_serial_probe+0xe25/0xfe2 [usbserial]
> [<c0477a83>] ? mark_held_locks+0x4e/0x78
> [<e14028bf>] ? ftdi_write_bulk_callback+0x0/0x10c [ftdi_sio]
> [<c0831dc9>] ? __mutex_unlock_slowpath+0x105/0x124
> [<c0477d9c>] ? trace_hardirqs_on+0x19/0x2c
> [<c0831e04>] ? mutex_unlock+0x1c/0x2f
> [<c0712bae>] ? usb_pm_unlock+0x21/0x34
> [<c0712eef>] ? usb_autopm_do_device+0xbe/0xd7
> [<c07139a0>] usb_probe_interface+0x127/0x1d4
> [<c06bca70>] driver_probe_device+0xca/0x1d9
> [<c06bcbd5>] __driver_attach+0x56/0x84
> [<c06bbe97>] bus_for_each_dev+0x53/0x8e
> [<c06bcb7f>] ? __driver_attach+0x0/0x84
> [<c06bc7ed>] driver_attach+0x27/0x3a
> [<c06bcb7f>] ? __driver_attach+0x0/0x84
> [<c06bc485>] bus_add_driver+0xde/0x235
> [<c06bcf24>] driver_register+0x89/0x101
> [<c060ab15>] ? __spin_lock_init+0x35/0x6c
> [<c0713725>] usb_register_driver+0x84/0xf2
> [<e093a000>] ? ftdi_init+0x0/0xd5 [ftdi_sio]
> [<e093a09e>] ftdi_init+0x9e/0xd5 [ftdi_sio]
> [<c040309e>] do_one_initcall+0x75/0x193
> [<c0476a5d>] ? register_lock_class+0x25/0x2be
> [<c0477868>] ? mark_lock+0x29/0x1f6
> [<c0477868>] ? mark_lock+0x29/0x1f6
> [<c04abd72>] ? ftrace_convert_nops+0x28/0x236
> [<c04a8539>] ? marker_update_probe_range+0x2a/0x203
> [<c0477868>] ? mark_lock+0x29/0x1f6
> [<c0477a83>] ? mark_held_locks+0x4e/0x78
> [<c0477868>] ? mark_lock+0x29/0x1f6
> [<c0477a83>] ? mark_held_locks+0x4e/0x78
> [<c0831dc9>] ? __mutex_unlock_slowpath+0x105/0x124
> [<c0477d50>] ? trace_hardirqs_on_caller+0x122/0x155
> [<c0477d9c>] ? trace_hardirqs_on+0x19/0x2c
> [<c046a50a>] ? __blocking_notifier_call_chain+0x5b/0x78
> [<c04105a1>] ? sched_clock+0x9/0xd
> [<c04765d4>] ? lock_release_holdtime+0x39/0x143
> [<c046a50a>] ? __blocking_notifier_call_chain+0x5b/0x78
> [<c04698fe>] ? up_read+0x29/0x4f
> [<c046a50a>] ? __blocking_notifier_call_chain+0x5b/0x78
> [<c046a548>] ? blocking_notifier_call_chain+0x21/0x37
> [<c048394e>] sys_init_module+0xc8/0x1ee
> [<c040a990>] syscall_call+0x7/0xb
>---[ end trace cce8bfafa21726b0 ]---
>usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
>usbcore: registered new interface driver ftdi_sio
>ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
>usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x0057
>usbcore: registered new interface driver usblp
>ppdev: user-space parallel port driver
>C-Media PCI 0000:00:05.0: enabling device (0084 -> 0085)
>C-Media PCI 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>device-mapper: multipath: version 1.1.0 loaded
>EXT4-fs (sda1): internal journal on sda1:8
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 3558388k swap on /dev/sda3.  Priority:-1 extents:1 across:3558388k

Actions: View

Attachments on bug 519515: 358844