Attachment 359153 Details for Bug 520233 – complete dmesg log

complete dmesg log

complete-dmesg (text/plain), 74.52 KB, created by Dennis de Vaal on 2009-08-29 12:44:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dennis de Vaal

Created: 2009-08-29 12:44:40 UTC

Size: 74.52 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.29.6-217.2.16.fc11.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.1 20090725 (Red Hat 4.4.1-2) (GCC) ) #1 SMP Mon Aug 24 17:17:40 EDT 2009
>Command line: ro root=/dev/mapper/vg_diaspora-lv_root rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000009fef0000 (usable)
> BIOS-e820: 000000009fef0000 - 000000009fef3000 (ACPI NVS)
> BIOS-e820: 000000009fef3000 - 000000009ff00000 (ACPI data)
> BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000260000000 (usable)
>DMI 2.4 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>last_pfn = 0x260000 max_arch_pfn = 0x100000000
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 512MB, type WB
>reg 2, base: 4GB, range: 4GB, type WB
>reg 3, base: 8GB, range: 1GB, type WB
>reg 4, base: 9GB, range: 512MB, type WB
>reg 5, base: 2559MB, range: 1MB, type UC
>total RAM coverred: 8191M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 2M 	num_reg: 6  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 512MB, type WB
>reg 2, base: 2559MB, range: 1MB, type UC
>reg 3, base: 4GB, range: 4GB, type WB
>reg 4, base: 8GB, range: 1GB, type WB
>reg 5, base: 9GB, range: 512MB, type WB
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>last_pfn = 0x9fef0 max_arch_pfn = 0x100000000
>init_memory_mapping: 0000000000000000-000000009fef0000
> 0000000000 - 009fe00000 page 2M
> 009fe00000 - 009fef0000 page 4k
>kernel direct mapping tables up to 9fef0000 @ 10000-15000
>last_map_addr: 9fef0000 end: 9fef0000
>init_memory_mapping: 0000000100000000-0000000260000000
> 0100000000 - 0260000000 page 2M
>kernel direct mapping tables up to 260000000 @ 13000-1e000
>last_map_addr: 260000000 end: 260000000
>RAMDISK: 37c9b000 - 37fef20a
>ACPI: RSDP 000F7C80, 0024 (r2 Nvidia)
>ACPI: XSDT 9FEF30C0, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 9FEFB500, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aEventBlock: 32/8 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Pm1aControlBlock: 16/8 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in PmTimerBlock: 32/8 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/8 [20081204]
>ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 128/8 [20081204]
>ACPI Warning (tbfadt-0412): Invalid length for Pm1aEventBlock: 8, using default 32 [20081204]
>ACPI Warning (tbfadt-0412): Invalid length for Pm1aControlBlock: 8, using default 16 [20081204]
>ACPI Warning (tbfadt-0412): Invalid length for PmTimerBlock: 8, using default 32 [20081204]
>FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>ACPI: DSDT 9FEF3240, 8257 (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
>ACPI: FACS 9FEF0000, 0040
>ACPI: HPET 9FEFB740, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 9FEFB7C0, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 9FEFB640, 0098 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: SSDT 9FEFC040, 087B (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000260000000
>Bootmem setup node 0 0000000000000000-0000000260000000
>  NODE_DATA [0000000000019000 - 000000000002dfff]
>  bootmap [000000000002e000 -  0000000000079fff] pages 4c
>(7 early reservations) ==> bootmem [0000000000 - 0260000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000ac910c]    TEXT DATA BSS ==> [0000200000 - 0000ac910c]
>  #3 [0037c9b000 - 0037fef20a]          RAMDISK ==> [0037c9b000 - 0037fef20a]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #6 [0000013000 - 0000019000]          PGTABLE ==> [0000013000 - 0000019000]
>found SMP MP-table at [ffff8800000f61a0] 000f61a0
> [ffffe20000000000-ffffe200085fffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00260000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0009fef0
>    0: 0x00100000 -> 0x00260000
>On node 0 totalpages: 2096767
>  DMA zone: 56 pages used for memmap
>  DMA zone: 2360 pages reserved
>  DMA zone: 1567 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 636712 pages, LIFO batch:31
>  Normal zone: 19712 pages used for memmap
>  Normal zone: 1422080 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10de8201 base: 0xfeff0000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 000000009fef0000 - 000000009fef3000
>PM: Registered nosave memory: 000000009fef3000 - 000000009ff00000
>PM: Registered nosave memory: 000000009ff00000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f2000000
>PM: Registered nosave memory: 00000000f2000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at a0000000 (gap: 9ff00000:50100000)
>NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Allocating 57344 bytes of per cpu data
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060359
>Policy zone: Normal
>Kernel command line: ro root=/dev/mapper/vg_diaspora-lv_root rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 2399.825 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 83886080 bytes of page_cgroup
>please try cgroup_disable=memory option if you don't want
>Checking aperture...
>No AGP bridge found
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 8109360k/9961472k available (3789k kernel code, 1574404k absent, 277708k reserved, 2295k data, 1304k init)
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.65 BogoMIPS (lpj=2399825)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0x0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20081204
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 18889 entries in 149 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>Booting processor 1 APIC 0x3 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4799.60 BogoMIPS (lpj=2399803)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/0x3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU1: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x1 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4799.57 BogoMIPS (lpj=2399787)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 2/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x2 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4799.61 BogoMIPS (lpj=2399806)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 3/0x2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU3: Thermal monitoring enabled (TM2)
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (19198.44 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=5880 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0,2 level MC
>  groups: 0 2
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU1 attaching sched-domain:
> domain 0: span 1,3 level MC
>  groups: 1 3
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>CPU2 attaching sched-domain:
> domain 0: span 0,2 level MC
>  groups: 2 0
>  domain 1: span 0-3 level CPU
>   groups: 0,2 1,3
>CPU3 attaching sched-domain:
> domain 0: span 1,3 level MC
>  groups: 3 1
>  domain 1: span 0-3 level CPU
>   groups: 1,3 0,2
>net_namespace: 1904 bytes
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time:  9:23:38  Date: 08/29/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 31
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f1ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:03.0: PME# disabled
>pci 0000:00:0a.1: reg 10 io port: [0xff00-0xff3f]
>pci 0000:00:0a.1: reg 20 io port: [0x1c00-0x1c3f]
>pci 0000:00:0a.1: reg 24 io port: [0x1c80-0x1cbf]
>pci 0000:00:0a.1: PME# supported from D3hot D3cold
>pci 0000:00:0a.1: PME# disabled
>pci 0000:00:0b.0: reg 10 32bit mmio: [0xeffff000-0xefffffff]
>pci 0000:00:0b.0: supports D1 D2
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0b.1: reg 10 32bit mmio: [0xefffe000-0xefffe0ff]
>pci 0000:00:0b.1: supports D1 D2
>pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.1: PME# disabled
>pci 0000:00:0d.0: reg 20 io port: [0xfc00-0xfc0f]
>pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
>pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
>pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
>pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
>pci 0000:00:0e.0: reg 20 io port: [0xf700-0xf70f]
>pci 0000:00:0e.0: reg 24 32bit mmio: [0xefffd000-0xefffdfff]
>pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7]
>pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3]
>pci 0000:00:0e.1: reg 18 io port: [0x960-0x967]
>pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63]
>pci 0000:00:0e.1: reg 20 io port: [0xf200-0xf20f]
>pci 0000:00:0e.1: reg 24 32bit mmio: [0xefffc000-0xefffcfff]
>pci 0000:00:0e.2: reg 10 io port: [0xf100-0xf107]
>pci 0000:00:0e.2: reg 14 io port: [0xf000-0xf003]
>pci 0000:00:0e.2: reg 18 io port: [0xef00-0xef07]
>pci 0000:00:0e.2: reg 1c io port: [0xee00-0xee03]
>pci 0000:00:0e.2: reg 20 io port: [0xed00-0xed0f]
>pci 0000:00:0e.2: reg 24 32bit mmio: [0xefffb000-0xefffbfff]
>pci 0000:00:0f.1: reg 10 32bit mmio: [0xefff0000-0xefff3fff]
>pci 0000:00:0f.1: PME# supported from D3hot D3cold
>pci 0000:00:0f.1: PME# disabled
>pci 0000:00:11.0: reg 10 32bit mmio: [0xefffa000-0xefffafff]
>pci 0000:00:11.0: reg 14 io port: [0xec00-0xec07]
>pci 0000:00:11.0: reg 18 32bit mmio: [0xefff9000-0xefff90ff]
>pci 0000:00:11.0: reg 1c 32bit mmio: [0xefff8000-0xefff800f]
>pci 0000:00:11.0: supports D1 D2
>pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:11.0: PME# disabled
>pci 0000:00:12.0: reg 10 32bit mmio: [0xefff7000-0xefff7fff]
>pci 0000:00:12.0: reg 14 io port: [0xeb00-0xeb07]
>pci 0000:00:12.0: reg 18 32bit mmio: [0xefff6000-0xefff60ff]
>pci 0000:00:12.0: reg 1c 32bit mmio: [0xefff5000-0xefff500f]
>pci 0000:00:12.0: supports D1 D2
>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.0: PME# disabled
>pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:03.0: bridge io port: [0xc000-0xdfff]
>pci 0000:00:03.0: bridge 32bit mmio: [0xe8000000-0xedffffff]
>pci 0000:00:03.0: bridge 64bit mmio pref: [0xa0000000-0xdfffffff]
>pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:02:02.0: PME# disabled
>pci 0000:01:00.0: bridge io port: [0xc000-0xdfff]
>pci 0000:01:00.0: bridge 32bit mmio: [0xe8000000-0xedffffff]
>pci 0000:01:00.0: bridge 64bit mmio pref: [0xa0000000-0xdfffffff]
>pci 0000:03:00.0: reg 10 32bit mmio: [0xea000000-0xeaffffff]
>pci 0000:03:00.0: reg 14 64bit mmio: [0xa0000000-0xbfffffff]
>pci 0000:03:00.0: reg 1c 64bit mmio: [0xe8000000-0xe9ffffff]
>pci 0000:03:00.0: reg 24 io port: [0xdc00-0xdc7f]
>pci 0000:03:00.0: reg 30 32bit mmio: [0xebfe0000-0xebffffff]
>pci 0000:02:00.0: bridge io port: [0xd000-0xdfff]
>pci 0000:02:00.0: bridge 32bit mmio: [0xe8000000-0xebffffff]
>pci 0000:02:00.0: bridge 64bit mmio pref: [0xa0000000-0xbfffffff]
>pci 0000:02:02.0: bridge io port: [0xc000-0xcfff]
>pci 0000:02:02.0: bridge 32bit mmio: [0xedf00000-0xedffffff]
>pci 0000:02:02.0: bridge 64bit mmio pref: [0xdff00000-0xdfffffff]
>pci 0000:05:0b.0: reg 10 32bit mmio: [0xefdff000-0xefdff7ff]
>pci 0000:05:0b.0: reg 14 io port: [0xbc00-0xbc7f]
>pci 0000:05:0b.0: supports D2
>pci 0000:05:0b.0: PME# supported from D2 D3hot D3cold
>pci 0000:05:0b.0: PME# disabled
>pci 0000:00:0f.0: transparent bridge
>pci 0000:00:0f.0: bridge io port: [0xb000-0xbfff]
>pci 0000:00:0f.0: bridge 32bit mmio: [0xefd00000-0xefdfffff]
>pci 0000:00:0f.0: bridge 32bit mmio pref: [0xefe00000-0xefefffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
>hpet0: 3 comparators, 32-bit 25.000000 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 11 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x1000-0x107f has been reserved
>system 00:01: ioport range 0x1080-0x10ff has been reserved
>system 00:01: ioport range 0x1400-0x147f has been reserved
>system 00:01: ioport range 0x1480-0x14ff has been reserved
>system 00:01: ioport range 0x1800-0x187f has been reserved
>system 00:01: ioport range 0x1880-0x18ff has been reserved
>system 00:02: ioport range 0x4d0-0x4d1 has been reserved
>system 00:02: ioport range 0x800-0x87f has been reserved
>system 00:02: ioport range 0x290-0x297 has been reserved
>system 00:02: ioport range 0x880-0x88f has been reserved
>system 00:09: iomem range 0xf0000000-0xf1ffffff has been reserved
>system 00:0a: iomem range 0xd0000-0xd3fff has been reserved
>system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved
>system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
>system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>system 00:0a: iomem range 0xfeff0000-0xfeff00ff has been reserved
>system 00:0a: iomem range 0x9fef0000-0x9fefffff could not be reserved
>system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved
>system 00:0a: iomem range 0x0-0x9ffff could not be reserved
>system 00:0a: iomem range 0x100000-0x9feeffff could not be reserved
>system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: iomem range 0xfeff0000-0xfeff03ff could not be reserved
>pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
>pci 0000:02:00.0:   IO window: 0xd000-0xdfff
>pci 0000:02:00.0:   MEM window: 0xe8000000-0xebffffff
>pci 0000:02:00.0:   PREFETCH window: 0x000000a0000000-0x000000bfffffff
>pci 0000:02:02.0: PCI bridge, secondary bus 0000:04
>pci 0000:02:02.0:   IO window: 0xc000-0xcfff
>pci 0000:02:02.0:   MEM window: 0xedf00000-0xedffffff
>pci 0000:02:02.0:   PREFETCH window: 0x000000dff00000-0x000000dfffffff
>pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
>pci 0000:01:00.0:   IO window: 0xc000-0xdfff
>pci 0000:01:00.0:   MEM window: 0xe8000000-0xedffffff
>pci 0000:01:00.0:   PREFETCH window: 0x000000a0000000-0x000000dfffffff
>pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:03.0:   IO window: 0xc000-0xdfff
>pci 0000:00:03.0:   MEM window: 0xe8000000-0xedffffff
>pci 0000:00:03.0:   PREFETCH window: 0x000000a0000000-0x000000dfffffff
>pci 0000:00:0f.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0f.0:   IO window: 0xb000-0xbfff
>pci 0000:00:0f.0:   MEM window: 0xefd00000-0xefdfffff
>pci 0000:00:0f.0:   PREFETCH window: 0x000000efe00000-0x000000efefffff
>pci 0000:00:03.0: setting latency timer to 64
>pci 0000:01:00.0: setting latency timer to 64
>pci 0000:02:00.0: setting latency timer to 64
>pci 0000:02:02.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xc000-0xdfff]
>pci_bus 0000:01: resource 1 mem: [0xe8000000-0xedffffff]
>pci_bus 0000:01: resource 2 mem: [0xa0000000-0xdfffffff]
>pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xdfff]
>pci_bus 0000:02: resource 1 mem: [0xe8000000-0xedffffff]
>pci_bus 0000:02: resource 2 mem: [0xa0000000-0xdfffffff]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:03: resource 1 mem: [0xe8000000-0xebffffff]
>pci_bus 0000:03: resource 2 mem: [0xa0000000-0xbfffffff]
>pci_bus 0000:03: resource 3 mem: [0x0-0x0]
>pci_bus 0000:04: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:04: resource 1 mem: [0xedf00000-0xedffffff]
>pci_bus 0000:04: resource 2 mem: [0xdff00000-0xdfffffff]
>pci_bus 0000:04: resource 3 mem: [0x0-0x0]
>pci_bus 0000:05: resource 0 io:  [0xb000-0xbfff]
>pci_bus 0000:05: resource 1 mem: [0xefd00000-0xefdfffff]
>pci_bus 0000:05: resource 2 mem: [0xefe00000-0xefefffff]
>pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs...<7>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3408k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1251537817.622:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 15845
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:03:00.0: Boot video device
>pcieport-driver 0000:00:03.0: setting latency timer to 64
>  alloc irq_desc for 24 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>pcieport-driver 0000:00:03.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:01:00.0: setting latency timer to 64
>pcieport-driver 0000:02:00.0: setting latency timer to 64
>pcieport-driver 0000:02:02.0: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button (CM) [PWRB]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [FAN] (on)
>ACPI: SSDT 9FEFB840, 01D6 (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>processor ACPI_CPU:00: registered as cooling_device1
>ACPI: SSDT 9FEFBCB0, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>processor ACPI_CPU:01: registered as cooling_device2
>ACPI: SSDT 9FEFBDE0, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>processor ACPI_CPU:02: registered as cooling_device3
>ACPI: SSDT 9FEFBF10, 012F (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>processor ACPI_CPU:03: registered as cooling_device4
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (40 C)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>Fixed MDIO Bus: probed
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>  alloc irq_desc for 23 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:0b.1: setting latency timer to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.1: debug port 1
>ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
>ehci_hcd 0000:00:0b.1: irq 23, io mem 0xefffe000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.29.6-217.2.16.fc11.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.1
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>  alloc irq_desc for 22 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
>ohci_hcd 0000:00:0b.0: setting latency timer to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0b.0: irq 22, io mem 0xeffff000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.29.6-217.2.16.fc11.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>  Magic number: 5:966:374
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1304k freed
>Write protecting the kernel read-only data: 1844k
>sata_nv 0000:00:0e.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>  alloc irq_desc for 21 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
>sata_nv 0000:00:0e.0: Using SWNCQ mode
>sata_nv 0000:00:0e.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 21
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 21
>usb 2-5: new full speed USB device using ohci_hcd and address 2
>usb 2-5: New USB device found, idVendor=046d, idProduct=c526
>usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-5: Product: USB Receiver
>usb 2-5: Manufacturer: Logitech
>usb 2-5: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input3
>generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-5/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/input/input4
>generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.0-5/input1
>usb 2-10: new low speed USB device using ohci_hcd and address 3
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: SAMSUNG HD753LJ, 1AA01107, max UDMA7
>ata1.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1AA0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 1465149168 512-byte hardware sectors: (750 GB/698 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usb 2-10: New USB device found, idVendor=046d, idProduct=c30e
>usb 2-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-10: Product: HID compliant keyboard
>usb 2-10: Manufacturer: Logitech
>usb 2-10: configuration #1 chosen from 1 choice
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-10/2-10:1.0/input/input5
>generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:0b.0-10/input0
>input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-10/2-10:1.1/input/input6
>generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:0b.0-10/input1
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>  alloc irq_desc for 20 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:0e.1: Using SWNCQ mode
>sata_nv 0000:00:0e.1: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 20
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 20
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: Maxtor 6B200M0, BANC19J0, max UDMA/133
>ata3.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6B200M0   BANC PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: [sdc] Attached SCSI disk
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: Maxtor 6B200M0, BANC19J0, max UDMA/133
>ata4.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6B200M0   BANC PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdd] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdd] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>sd 3:0:0:0: [sdd] Write Protect is off
>sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: [sdd] Attached SCSI disk
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
>sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:0e.2: Using SWNCQ mode
>sata_nv 0000:00:0e.2: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 23
>ata6: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 23
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>pata_acpi 0000:00:0d.0: setting latency timer to 64
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 109, dev dm-0:8, commit interval 5 seconds
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-0 with ordered data mode
>type=1404 audit(1251537823.757:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 128681 rules.
>SELinux: 8192 avtab hash slots, 128681 rules.
>SELinux:  8 users, 11 roles, 2767 types, 128 bools, 1 sens, 1024 cats
>SELinux:  74 classes, 128681 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1251537823.983:3): policy loaded auid=4294967295 ses=4294967295
>udev: starting version 141
>ATK0110 ATK0110:00: adding...
>ATK0110 ATK0110:00: board ID = STRIKERF
>ATK0110 ATK0110:00: method RTMP not found: AE_NOT_FOUND
>ATK0110 ATK0110:00: Using new hwmon interface
>ATK0110 ATK0110:00: Enumerating hwmon sensors
>ATK0110 ATK0110:00: voltage: 0x6020011 Vcore Voltage [850-750] enabled
>ATK0110 ATK0110:00: temperature: 0x6030012 CPU Temperature [600-350] enabled
>ATK0110 ATK0110:00: fan: 0x6040013 CPU_FAN FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x6040073 CHA_FAN1 FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x60400c4 CHA_FAN2 FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x60400c5 CHA_FAN3 FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: voltage: 0x6020061 +12V Voltage [10200-3600] enabled
>ATK0110 ATK0110:00: voltage: 0x6020062 +5V Voltage [4500-1000] enabled
>ATK0110 ATK0110:00: voltage: 0x6020063 +3.3V Voltage [2970-660] enabled
>ATK0110 ATK0110:00: temperature: 0x6030074 MB Temperature [450-500] enabled
>ATK0110 ATK0110:00: fan: 0x6040033 OPT1 FAN FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x6040043 OPT2 FAN FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x6040053 OPT3 FAN FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: fan: 0x60400e3 POWER FAN Speed [800-6400] enabled
>ATK0110 ATK0110:00: voltage: 0x6020071 MEMORY [1330-1140] enabled
>ATK0110 ATK0110:00: voltage: 0x6020081 +1.2V HT [1080-240] enabled
>ATK0110 ATK0110:00: voltage: 0x6020091 NB [1080-240] enabled
>ATK0110 ATK0110:00: voltage: 0x60200a1 SB [1350-300] enabled
>ATK0110 ATK0110:00: voltage: 0x60200b1 CPU VTT [1080-240] enabled
>ATK0110 ATK0110:00: voltage: 0x60200c1 DDR2 TERM. [630-540] enabled
>ATK0110 ATK0110:00: voltage: 0x60200d1 CPU PLL [1350-300] enabled
>ATK0110 ATK0110:00: temperature: 0x6030084 OPT1 [450-500] enabled
>ATK0110 ATK0110:00: temperature: 0x6030094 OPT2 [450-500] enabled
>ATK0110 ATK0110:00: temperature: 0x60300a4 OPT3 [450-500] enabled
>ATK0110 ATK0110:00: registering hwmon device
>ATK0110 ATK0110:00: populating sysfs directory
>input: PC Speaker as /devices/platform/pcspkr/input/input7
>pata_amd 0000:00:0d.0: version 0.4.1
>pata_amd 0000:00:0d.0: setting latency timer to 64
>scsi6 : pata_amd
>scsi7 : pata_amd
>ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ata7.00: ATAPI: LITE-ON DVDRW SOHW-832S, VS01, max UDMA/33
>ata7: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata7.00: configured for UDMA/33
>scsi 6:0:0:0: CD-ROM            LITE-ON  DVDRW SOHW-832S  VS01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>sr 6:0:0:0: Attached scsi generic sg4 type 5
>ata8: port disabled. ignoring.
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
>forcedeth 0000:00:11.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 19, addr 00:1e:8c:e0:2b:c0
>forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>  alloc irq_desc for 19 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10
>ACPI: I/O resource nForce2_smbus [0x1c00-0x1c3f] conflicts with ACPI region SM00 [0x1c00-0x1c05]
>ACPI: Device needs an ACPI driver
>nForce2_smbus 0000:00:0a.1: Error probing SMB1.
>ACPI: I/O resource nForce2_smbus [0x1c80-0x1cbf] conflicts with ACPI region SM01 [0x1c80-0x1c85]
>ACPI: Device needs an ACPI driver
>nForce2_smbus 0000:00:0a.1: Error probing SMB2.
>ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
>forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
>forcedeth 0000:00:12.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>firewire_core: created device fw0: GUID 001e8c00010ecf96, S400
>forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 19, addr 00:1e:8c:e0:3c:01
>forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
>HDA Intel 0000:00:0f.1: setting latency timer to 64
>nvidia: module license 'NVIDIA' taints kernel.
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>ALSA sound/pci/hda/hda_codec.c:3507: autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0)
>ALSA sound/pci/hda/hda_codec.c:3511:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3515:    hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3516:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3524:    inputs: mic=0x17, fmic=0x14, line=0x15, fline=0x0, cd=0x18, aux=0x0
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>  alloc irq_desc for 16 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>nvidia 0000:03:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
>nvidia 0000:03:00.0: setting latency timer to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  185.18.14  Wed May 27 01:23:47 PDT 2009
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 4 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa0ad20c0
>vboxdrv: fAsync=0 offMin=0x360 offMax=0x1cb0
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.0.4_OSE (interface 0x000e0000).
>VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0c6ec80
>VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0c86800
>device-mapper: multipath: version 1.0.5 loaded
>EXT4 FS on dm-0, internal journal on dm-0:8
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1303, dev dm-3:8, commit interval 5 seconds
>EXT4-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT4 FS on dm-3, internal journal on dm-3:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-3 with ordered data mode
>SELinux: initialized (dev dm-3, type ext4), uses xattr
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1304, dev dm-2:8, commit interval 5 seconds
>EXT4-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT4 FS on dm-2, internal journal on dm-2:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-2 with ordered data mode
>SELinux: initialized (dev dm-2, type ext4), uses xattr
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1305, dev dm-4:8, commit interval 5 seconds
>EXT4-fs warning: mounting fs with errors, running e2fsck is recommended
>EXT4 FS on dm-4, internal journal on dm-4:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-4 with ordered data mode
>SELinux: initialized (dev dm-4, type ext4), uses xattr
>EXT4-fs: barriers enabled
>kjournald2 starting: pid 1306, dev dm-5:8, commit interval 5 seconds
>EXT4-fs warning: mounting fs with errors, running e2fsck is recommended
>EXT4 FS on dm-5, internal journal on dm-5:8
>EXT4-fs: delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs: mounted filesystem dm-5 with ordered data mode
>SELinux: initialized (dev dm-5, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>swap_cgroup: uses 39744 bytes of vmalloc for pointer array space and 20348928 bytes to hold mem_cgroup pointers on swap
>swap_cgroup can be disabled by noswapaccount boot option.
>Adding 10174456k swap on /dev/mapper/vg_diaspora-lv_swap.  Priority:-1 extents:1 across:10174456k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>platform microcode: firmware: requesting intel-ucode/06-0f-0b
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>JBD: barrier-based sync failed on dm-0:8 - disabling barriers
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>  alloc irq_desc for 25 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>forcedeth 0000:00:12.0: irq 25 for MSI/MSI-X
>eth1: no link during initialization.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>  alloc irq_desc for 26 on cpu 0 node 0
>  alloc kstat_irqs on cpu 0 node 0
>forcedeth 0000:00:11.0: irq 26 for MSI/MSI-X
>eth0: no IPv6 routers present
>JBD: barrier-based sync failed on dm-4:8 - disabling barriers
>ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata7.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
>         cdb 00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
>         res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
>ata7.00: status: { DRDY }
>ata7: soft resetting link
>ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata7.00: configured for UDMA/33
>ata7.00: qc timeout (cmd 0xa0)
>ata7.00: TEST_UNIT_READY failed (err_mask=0x5)
>ata7: soft resetting link
>ata7: nv_mode_filter: 0x701f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata7.00: configured for UDMA/33
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata7.00: qc timeout (cmd 0xa0)
>ata7.00: TEST_UNIT_READY failed (err_mask=0x5)
>ata7.00: limiting speed to UDMA/33:PIO3
>ata7: soft resetting link
>ata7: nv_mode_filter: 0x700f&0x701f->0x700f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
>ata7.00: configured for UDMA/33
>ata3.00: qc timeout (cmd 0x27)
>ata3.00: failed to read native max address (err_mask=0x4)
>ata3.00: HPA support seems broken, skipping HPA handling
>ata3.00: revalidation failed (errno=-5)
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>ata7.00: qc timeout (cmd 0xa0)
>ata7.00: TEST_UNIT_READY failed (err_mask=0x5)
>ata7.00: disabled
>ata7: soft resetting link
>ata7: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>JBD: barrier-based sync failed on dm-3:8 - disabling barriers
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>ata3: limiting SATA link speed to 1.5 Gbps
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:80/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/133
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 8389055
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/133
>ata3: EH complete
>ata3.00: limiting speed to UDMA/100:PIO4
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/100
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/100
>ata3: EH complete
>ata3.00: limiting speed to UDMA/33:PIO4
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:10:ff:01:c4/00:00:00:00:00/e1 tag 0 dma 8192 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 29622783
>Aborting journal on device dm-4:8.
>ata3: EH complete
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:47:22:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 8775
>ata3: EH complete
>EXT4-fs error (device dm-4): ext4_read_inode_bitmap: Cannot read inode bitmap - block_group = 0, inode_bitmap = 1041
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:c4/00:00:00:00:00/e1 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 29622719
>Buffer I/O error on device dm-4, logical block 3702784
>lost page write due to I/O error on dm-4
>JBD2: I/O error detected when updating journal superblock for dm-4:8.
>ata3: EH complete
>journal commit I/O error
>ext4_abort called.
>EXT4-fs error (device dm-4): ext4_journal_start_sb: Detected aborted journal
>Remounting filesystem read-only
>ext4_da_writepages: jbd2_start: 1024 pages, ino 262156; err -30
>Pid: 46, comm: pdflush Tainted: P           2.6.29.6-217.2.16.fc11.x86_64 #1
>Call Trace:
> [<ffffffff811419d2>] ext4_da_writepages+0x2be/0x539
> [<ffffffff810a7b84>] ? __pagevec_release+0x26/0x32
> [<ffffffff810a5a68>] ? write_cache_pages+0x350/0x3d7
> [<ffffffff81142c73>] ? ext4_da_get_block_write+0x0/0x11f
> [<ffffffff810a5b42>] do_writepages+0x2d/0x3c
> [<ffffffff810eeb8a>] __writeback_single_inode+0x170/0x29c
> [<ffffffff810399f1>] ? update_curr+0xf6/0xff
> [<ffffffff810ef091>] generic_sync_sb_inodes+0x215/0x366
> [<ffffffff810ef3f5>] writeback_inodes+0xa9/0x103
> [<ffffffff810a5cb0>] wb_kupdate+0xa8/0x11e
> [<ffffffff810a69f3>] pdflush+0x175/0x23a
> [<ffffffff810a5c08>] ? wb_kupdate+0x0/0x11e
> [<ffffffff810a687e>] ? pdflush+0x0/0x23a
> [<ffffffff810a687e>] ? pdflush+0x0/0x23a
> [<ffffffff8105c585>] kthread+0x4d/0x78
> [<ffffffff8101264a>] child_rip+0xa/0x20
> [<ffffffff81011f67>] ? restore_args+0x0/0x30
> [<ffffffff8105c538>] ? kthread+0x0/0x78
> [<ffffffff81012640>] ? child_rip+0x0/0x20
>ALSA sound/pci/hda/hda_intel.c:635: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f000a
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 447
>Buffer I/O error on device dm-4, logical block 0
>lost page write due to I/O error on dm-4
>ata3: EH complete
>EXT4-fs error (device dm-4) in ext4_delete_inode: IO failure
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:c7:01:00/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 455
>Buffer I/O error on device dm-4, logical block 1
>lost page write due to I/O error on dm-4
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:bf:02:40/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 4195007
>Buffer I/O error on device dm-4, logical block 524320
>lost page write due to I/O error on dm-4
>ata3: EH complete
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:07:c1:41/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 4309255
>Buffer I/O error on device dm-4, logical block 538601
>lost page write due to I/O error on dm-4
>ata3: EH complete
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd ca/00:08:3f:02:80/00:00:00:00:00/e0 tag 0 dma 4096 out
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
>sd 2:0:0:0: [sdc] Sense Key : Aborted Command [current] [descriptor]
>Descriptor sense data with sense descriptors (in hex):
>        72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
>        00 00 00 00 
>sd 2:0:0:0: [sdc] Add. Sense: No additional sense information
>end_request: I/O error, dev sdc, sector 8389183
>Buffer I/O error on device dm-4, logical block 1048592
>lost page write due to I/O error on dm-4
>ata3: EH complete
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sdc] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
>sd 2:0:0:0: [sdc] Write Protect is off
>sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
>ata3.00: cmd c8/00:08:bf:01:00/00:00:00:00:00/e0 tag 0 dma 4096 in
>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>ata3.00: status: { DRDY }
>ata3: hard resetting link
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: configured for UDMA/33
>ata3: EH complete

Actions: View

Attachments on bug 520233: 359150 | 359151 | 359152 | 359153