Attachment 360233 Details for Bug 521512 – dmesg -- nomodeset

dmesg -- nomodeset

dmesg (text/plain), 34.23 KB, created by Qian Cai on 2009-09-09 14:27:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qian Cai

Created: 2009-09-09 14:27:02 UTC

Size: 34.23 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31-0.204.rc9.fc12.x86_64 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.4.1 20090903 (Red Hat 4.4.1-9) (GCC) ) #1 SMP Sat Sep 5 20:45:55 EDT 2009
>Command line: ro root=UUID=63f5071e-45a2-41b4-aec1-7578b59cb52d rhgb quiet LANG=zh_CN.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk rd_plytheme=charge nomodeset 3
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007dfd0000 (usable)
> BIOS-e820: 000000007dfd0000 - 000000007dfefc00 (reserved)
> BIOS-e820: 000000007dfefc00 - 000000007dffb000 (ACPI NVS)
> BIOS-e820: 000000007dffb000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>last_pfn = 0x7dfd0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-back
>  D0000-DFFFF uncachable
>  E0000-FFFFF write-back
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FFC0000000 write-back
>  1 base 0040000000 mask FFE0000000 write-back
>  2 base 0060000000 mask FFF0000000 write-back
>  3 base 0070000000 mask FFF8000000 write-back
>  4 base 0078000000 mask FFFC000000 write-back
>  5 base 007C000000 mask FFFE000000 write-back
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-000000007dfd0000
> 0000000000 - 007de00000 page 2M
> 007de00000 - 007dfd0000 page 4k
>kernel direct mapping tables up to 7dfd0000 @ 8000-c000
>RAMDISK: 37151000 - 37fef64e
>ACPI: RSDP 00000000000fe270 00014 (v00 HP    )
>ACPI: RSDT 000000007dfefc84 00034 (v01 HP     0944     01070520 HP   00000001)
>ACPI: FACP 000000007dfefc00 00084 (v02 HP     0944     00000002 HP   00000001)
>ACPI: DSDT 000000007dfefd50 0708E (v01 HP        SB400 00010000 MSFT 0100000E)
>ACPI: FACS 000000007dffae80 00040
>ACPI: APIC 000000007dfefcb8 0005A (v01 HP     0944     00000001 HP   00000001)
>ACPI: MCFG 000000007dfefd14 0003C (v01 HP     0944     00000001 HP   00000001)
>ACPI: SSDT 000000007dff6dde 00382 (v01 HP       HPQPpc 00001001 MSFT 0100000E)
>ACPI: Local APIC address 0xfec01000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007dfd0000
>Bootmem setup node 0 0000000000000000-000000007dfd0000
>  NODE_DATA [000000000000a000 - 0000000000021fff]
>  bootmap [0000000000022000 -  0000000000031bff] pages 10
>(7 early reservations) ==> bootmem [0000000000 - 007dfd0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0002660390]    TEXT DATA BSS ==> [0001000000 - 0002660390]
>  #3 [0037151000 - 0037fef64e]          RAMDISK ==> [0037151000 - 0037fef64e]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0002661000 - 0002661154]              BRK ==> [0002661000 - 0002661154]
>  #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
> [ffffea0000000000-ffffea00033fffff] PMD -> [ffff880002c00000-ffff880005ffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007dfd0
>On node 0 totalpages: 515951
>  DMA zone: 104 pages used for memmap
>  DMA zone: 101 pages reserved
>  DMA zone: 3794 pages, LIFO batch:0
>  DMA32 zone: 12999 pages used for memmap
>  DMA32 zone: 498953 pages, LIFO batch:31
>SB4X0 revision 0x11
>Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfec01000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
>NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 478 pages at ffff88000268e000, static data 1926688 bytes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 502747
>Policy zone: DMA32
>Kernel command line: ro root=UUID=63f5071e-45a2-41b4-aec1-7578b59cb52d rhgb quiet LANG=zh_CN.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=uk rd_plytheme=charge nomodeset 3
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 3f6000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 1970392k/2064192k available (5173k kernel code, 388k absent, 93412k reserved, 3122k data, 3196k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:256
>Fast TSC calibration using PIT
>Detected 2194.593 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:  8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:          4096
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 6207 kB
> per task-struct memory footprint: 2688 bytes
>allocated 20971520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>ODEBUG: 9 of 9 active objects replaced
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.18 BogoMIPS (lpj=2194593)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0x0 -> Node 0
>tseg: 0000000000
>mce: CPU supports 5 MCE banks
>Performance Counters: AMD PMU driver.
>... version:                 0
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              00007fffffffffff
>... fixed-purpose counters:  0
>... counter mask:            000000000000000f
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 29k freed
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 21020 entries in 83 pages
>Setting APIC routing to flat
>  alloc irq_desc for 21 on node 0
>  alloc kstat_irqs on node 0
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Turion(tm) 64 Mobile ML-40                  stepping 02
>Brought up 1 CPUs
>Total of 1 processors activated (4389.18 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=104 bytes
>sizeof(inode)=1168 bytes
>sizeof(dentry)=256 bytes
>sizeof(ext3inode)=1584 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=9304 bytes
>CPU0 attaching NULL sched-domain.
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 10:11:15  Date: 09/09/09
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, fffff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, ffffffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [80000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG at e0000000 - efffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: Power Resource [C1CB] (off)
>ACPI: Power Resource [C1B3] (on)
>ACPI: Power Resource [C1C3] (on)
>ACPI: Power Resource [C25C] (off)
>ACPI: Power Resource [C25D] (off)
>ACPI: Power Resource [C25E] (off)
>ACPI: Power Resource [C25F] (off)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [C046] (0000:00)
>pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:04.0: PME# disabled
>pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:13.0: reg 10 32bit mmio: [0xc4800000-0xc4800fff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xc4801000-0xc4801fff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xc4802000-0xc4802fff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.0: reg 10 io port: [0x8200-0x820f]
>pci 0000:00:14.0: reg 14 32bit mmio: [0xc4803000-0xc48033ff]
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0x3010-0x301f]
>pci 0000:00:14.5: reg 10 32bit mmio: [0xc4804000-0xc48040ff]
>pci 0000:00:14.6: reg 10 32bit mmio: [0xc4805000-0xc48050ff]
>pci 0000:01:05.0: reg 10 32bit mmio: [0xc0000000-0xc3ffffff]
>pci 0000:01:05.0: reg 14 io port: [0x2000-0x20ff]
>pci 0000:01:05.0: reg 18 32bit mmio: [0xc4400000-0xc440ffff]
>pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xc4400000-0xc47fffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xc3ffffff]
>pci 0000:00:04.0: bridge io port: [0x00-0xfff]
>pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:04.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
>pci 0000:00:05.0: bridge io port: [0x00-0xfff]
>pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff]
>pci 0000:00:05.0: bridge 32bit mmio pref: [0x000000-0x0fffff]
>pci 0000:02:01.0: reg 10 32bit mmio: [0xc4000000-0xc400ffff]
>pci 0000:02:01.0: PME# supported from D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:02.0: reg 10 32bit mmio: [0xc4010000-0xc4011fff]
>pci 0000:02:04.0: reg 10 32bit mmio: [0xc4012000-0xc4012fff]
>pci 0000:02:04.0: supports D1 D2
>pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:04.0: PME# disabled
>pci 0000:02:04.2: reg 10 32bit mmio: [0xc4013000-0xc40137ff]
>pci 0000:02:04.2: reg 14 32bit mmio: [0xc4014000-0xc4017fff]
>pci 0000:02:04.2: supports D1 D2
>pci 0000:02:04.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.2: PME# disabled
>pci 0000:02:04.3: reg 10 32bit mmio: [0xc4018000-0xc4019fff]
>pci 0000:02:04.3: supports D1 D2
>pci 0000:02:04.3: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.3: PME# disabled
>pci 0000:02:04.4: reg 10 32bit mmio: [0xc401a000-0xc401a0ff]
>pci 0000:02:04.4: reg 14 32bit mmio: [0xc401b000-0xc401b0ff]
>pci 0000:02:04.4: reg 18 32bit mmio: [0xc401c000-0xc401c0ff]
>pci 0000:02:04.4: supports D1 D2
>pci 0000:02:04.4: PME# supported from D0 D1 D2 D3hot
>pci 0000:02:04.4: PME# disabled
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge 32bit mmio: [0xc4000000-0xc43fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C046.C0AA._PRT]
>ACPI: PCI Interrupt Link [C0EF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F4] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [C0F5] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F6] (IRQs *10 11)
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:04.0: BAR 13: can't allocate resource
>pci 0000:00:04.0: BAR 14: can't allocate resource
>pci 0000:00:04.0: BAR 15: can't allocate resource
>pci 0000:00:05.0: BAR 13: can't allocate resource
>pci 0000:00:05.0: BAR 14: can't allocate resource
>pci 0000:00:05.0: BAR 15: can't allocate resource
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMA-API: preallocated 32768 debug entries
>DMA-API: debugging enabled by kernel config
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xe0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x7dffffff could not be reserved
>system 00:09: ioport range 0x40b-0x40b has been reserved
>system 00:09: ioport range 0x4d0-0x4d1 has been reserved
>system 00:09: ioport range 0x4d6-0x4d6 has been reserved
>system 00:09: ioport range 0x500-0x53f has been reserved
>system 00:09: ioport range 0xc00-0xc01 has been reserved
>system 00:09: ioport range 0xc14-0xc14 has been reserved
>system 00:09: ioport range 0xc50-0xc51 has been reserved
>system 00:09: ioport range 0xc52-0xc52 has been reserved
>system 00:09: ioport range 0xc6c-0xc6c has been reserved
>system 00:09: ioport range 0xc6f-0xc6f has been reserved
>system 00:09: ioport range 0xcd4-0xcdf has been reserved
>system 00:09: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
>system 00:0a: ioport range 0x8000-0x802f has been reserved
>system 00:0a: ioport range 0x8100-0x811f has been reserved
>system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>system 00:0b: iomem range 0xcf000-0xdffff has been reserved
>system 00:0b: iomem range 0x7e000000-0x7fffffff has been reserved
>system 00:0b: iomem range 0xfec01000-0xfec01fff has been reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0x2000-0x2fff
>pci 0000:00:01.0:   MEM window: 0xc4400000-0xc47fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000c0000000-0x000000c3ffffff
>pci 0000:00:04.0: PCI bridge, secondary bus 0000:10
>pci 0000:00:04.0:   IO window: disabled
>pci 0000:00:04.0:   MEM window: disabled
>pci 0000:00:04.0:   PREFETCH window: disabled
>pci 0000:00:05.0: PCI bridge, secondary bus 0000:20
>pci 0000:00:05.0:   IO window: disabled
>pci 0000:00:05.0:   MEM window: disabled
>pci 0000:00:05.0:   PREFETCH window: disabled
>pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
>pci 0000:02:04.0:   IO window: 0x001000-0x0010ff
>pci 0000:02:04.0:   IO window: 0x001400-0x0014ff
>pci 0000:02:04.0:   PREFETCH window: 0x80000000-0x83ffffff
>pci 0000:02:04.0:   MEM window: 0x84000000-0x87ffffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
>pci 0000:00:14.4:   IO window: 0x1000-0x1fff
>pci 0000:00:14.4:   MEM window: 0xc4000000-0xc43fffff
>pci 0000:00:14.4:   PREFETCH window: 0x80000000-0x83ffffff
>pci 0000:00:04.0: setting latency timer to 64
>pci 0000:00:05.0: setting latency timer to 64
>  alloc irq_desc for 20 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:02:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:01: resource 1 mem: [0xc4400000-0xc47fffff]
>pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc3ffffff]
>pci_bus 0000:10: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:10: resource 1 mem: [0x0-0xfffff]
>pci_bus 0000:10: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:20: resource 0 mem: [0x0-0xfff]
>pci_bus 0000:20: resource 1 mem: [0x0-0xfffff]
>pci_bus 0000:20: resource 2 mem: [0x0-0xfffff]
>pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:02: resource 1 mem: [0xc4000000-0xc43fffff]
>pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:03: resource 0 io:  [0x1000-0x10ff]
>pci_bus 0000:03: resource 1 io:  [0x1400-0x14ff]
>pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
>pci_bus 0000:03: resource 3 mem: [0x84000000-0x87ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 14969k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1252491075.258:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3877
>SELinux:  Registering netfilter hooks
>cryptomgr_test used greatest stack depth: 5856 bytes left
>cryptomgr_test used greatest stack depth: 5792 bytes left
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:00.0: MSI quirk detected; MSI disabled
>pci 0000:01:05.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp_glue: can't get bus number, assuming 0
>acpiphp: Slot [1] registered
>acpiphp: Slot [1-1] registered
>ACPI: AC Adapter [C173] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [C1EC]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [C1ED]
>fan PNP0C0B:00: registered as cooling_device0
>ACPI: Fan [C260] (off)
>fan PNP0C0B:01: registered as cooling_device1
>ACPI: Fan [C261] (off)
>fan PNP0C0B:02: registered as cooling_device2
>ACPI: Fan [C262] (off)
>fan PNP0C0B:03: registered as cooling_device3
>ACPI: Fan [C263] (off)
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C3[C3])
>processor LNXCPU:00: registered as cooling_device4
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ1] (73 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ2] (59 C)
>thermal LNXTHERM:03: registered as thermal_zone2
>ACPI: Thermal Zone [TZ3] (36 C)
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>  alloc irq_desc for 17 on node 0
>  alloc kstat_irqs on node 0
>serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:14.6: PCI INT B disabled
>work_for_cpu used greatest stack depth: 4976 bytes left
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 19 on node 0
>  alloc kstat_irqs on node 0
>ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xc4802000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-0.204.rc9.fc12.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>work_for_cpu used greatest stack depth: 3856 bytes left
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xc4800000
>ACPI: Battery Slot [C175] (battery present)
>ACPI: Battery Slot [C174] (battery absent)
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-0.204.rc9.fc12.x86_64 ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xc4801000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31-0.204.rc9.fc12.x86_64 ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: PS/2 Controller [PNP0303:C1C0,PNP0f13:C1C1] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 9:369:173
>acpi device:36: hash matches
>rtc_cmos 00:06: setting system clock to 2009-09-09 10:11:16 UTC (1252491076)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 3196k freed
>Write protecting the kernel read-only data: 7388k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>dracut: dracut-001-2.fc12
>dracut Warning: Theme charge not found!
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>[drm] VGACON disable radeon kernel modesetting.
>pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>[drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
>dracut: Starting plymouth daemon
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input5
>ACPI: Video Device [C048] (multi-head: yes  rom: no  post: no)
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>usb 2-2: New USB device found, idVendor=03f0, idProduct=171d
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: HP Integrated Module
>usb 2-2: Manufacturer: Broadcom Corp
>usb 2-2: configuration #1 chosen from 1 choice
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>async/0 used greatest stack depth: 3824 bytes left
>  alloc irq_desc for 16 on node 0
>  alloc kstat_irqs on node 0
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>scsi0 : pata_atiixp
>scsi1 : pata_atiixp
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3010 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3018 irq 15
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>  alloc irq_desc for 22 on node 0
>  alloc kstat_irqs on node 0
>b43-pci-bridge 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
>tg3.c:v3.99 (April 20, 2009)
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>tg3 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>tg3 0000:02:01.0: wake-up capability disabled by ACPI
>tg3 0000:02:01.0: PME# disabled
>ata1.00: ATA-6: ST9808211A, 3.02, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST9808211A       3.02 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda4 <
>usb 3-1: New USB device found, idVendor=08ff, idProduct=2580
>usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 3-1: Product: Fingerprint Sensor
>usb 3-1: configuration #1 chosen from 1 choice
> sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0f:b0:bd:9b:71
>eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>ata2.00: ATAPI: MATSHITAUJ-840D, 1.02, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 1:0:0:0: CD-ROM            MATSHITA UJ-840D          1.02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>cdrom_id used greatest stack depth: 3256 bytes left
>EXT4-fs (sda9): INFO: recovery required on readonly filesystem
>EXT4-fs (sda9): write access will be enabled during recovery
>EXT4-fs (sda9): barriers enabled
>kjournald2 starting: pid 225, dev sda9:8, commit interval 5 seconds
>EXT4-fs (sda9): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda9): recovery complete
>EXT4-fs (sda9): mounted filesystem with ordered data mode
>type=1404 audit(1252491080.726:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 127397 rules.
>SELinux: 8192 avtab hash slots, 127397 rules.
>SELinux:  8 users, 11 roles, 2803 types, 128 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 127397 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda9, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1252491081.782:3): policy loaded auid=4294967295 ses=4294967295
>udev: starting version 145
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8200, revision 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: WMI: Mapper loaded
>Bluetooth: Generic Bluetooth USB driver ver 0.5
>usbcore: registered new interface driver btusb
>yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:308b]
>yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
>yenta_cardbus 0000:02:04.0: Using INTVAL to route CSC interrupts to PCI
>yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:02:04.0: TI: mfunc 0x01a11b22, devctl 0x64
>yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0ef8, PCI irq 20
>yenta_cardbus 0000:02:04.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc43fffff
>yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>type=1400 audit(1252491087.434:4): avc:  denied  { mmap_zero } for  pid=463 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
>EDAC MC: Ver: 2.1.0 Sep  5 2009
>parport_pc 00:02: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>cfg80211: Calling CRDA to update world regulatory domain
>tifm_7xx1 0000:02:04.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>sdhci-pci 0000:02:04.4: SDHCI controller found [104c:8034] (rev 0)
>sdhci-pci 0000:02:04.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:04.4] using PIO
>Registered led device: mmc1::
>mmc1: SDHCI controller on PCI [0000:02:04.4] using PIO
>Registered led device: mmc2::
>mmc2: SDHCI controller on PCI [0000:02:04.4] using PIO
>firewire_ohci 0000:02:04.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
>EDAC amd64_edac:  Ver: 3.2.0 Sep  5 2009
>firewire_ohci: Added fw-ohci device 0000:02:04.2, OHCI version 1.10
>ALSA sound/pci/ac97/ac97_codec.c:2163: MC'97 0 converters and GPIO not ready (0x1)
>ATI IXP AC97 controller 0000:00:14.5: power state changed by ACPI to D0
>ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ppdev: user-space parallel port driver
>EDAC amd64: This node reports that Memory ECC is currently disabled.
>EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
>EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
>    Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
>    Might be a BIOS bug, if BIOS says ECC is enabled
>    Use of the override can cause unknown side effects.
>amd64_edac: probe of 0000:00:18.2 failed with error -22
>b43-phy0: Broadcom 4318 WLAN found (core revision 9)
>b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>firewire_core: created device fw0: GUID 00023f9929f9500a, S400
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>phy0: Selected rate control algorithm 'minstrel'
>Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
>ip used greatest stack depth: 3064 bytes left
>type=1400 audit(1252491090.242:5): avc:  denied  { sys_module } for  pid=614 comm="iw" capability=16 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tclass=capability
>cfg80211: Calling CRDA for country: CN
>cfg80211: Regulatory domain changed to country: CN
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
>device-mapper: multipath: version 1.1.0 loaded
>EXT4-fs (sda9): internal journal on sda9:8
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 3916040k swap on /dev/sda5.  Priority:-1 extents:1 across:3916040k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 521512: 360223 | 360224 | 360230 | 360231 | 360233 | 363483 | 363551 | 363783 | 363784 | 363785