Attachment 368087 Details for Bug 530803 – dmesg, annotated with point where I turn on compiz

dmesg, annotated with point where I turn on compiz

dmesg.post (text/plain), 38.94 KB, created by Richard Schwarting on 2009-11-08 21:23:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Schwarting

Created: 2009-11-08 21:23:56 UTC

Size: 38.94 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.1-56.fc12.i686 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.1 20090925 (Red Hat 4.4.1-17) (GCC) ) #1 SMP Tue Sep 29 16:32:02 EDT 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005f6e0000 (usable)
> BIOS-e820: 000000005f6e0000 - 000000005f6f5000 (ACPI data)
> BIOS-e820: 000000005f6f5000 - 000000005f700000 (ACPI NVS)
> BIOS-e820: 000000005f700000 - 0000000060000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>DMI present.
>last_pfn = 0x5f6e0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-DBFFF uncachable
>  DC000-DFFFF write-back
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 040000000 mask FE0000000 write-back
>  2 base 05F700000 mask FFFF00000 uncachable
>  3 base 05F800000 mask FFF800000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>original variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1527MB, range: 1MB, type UC
>reg 3, base: 1528MB, range: 8MB, type UC
>total RAM coverred: 1527M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 1GB, type WB
>reg 1, base: 1GB, range: 512MB, type WB
>reg 2, base: 1527MB, range: 1MB, type UC
>reg 3, base: 1528MB, range: 8MB, type UC
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000373fe000
>Using x86 segment limits to approximate NX protection
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 5ec40000 - 5f6de23d
>Allocated new RAMDISK: 012bd000 - 01d5b23d
>Move RAMDISK from 000000005ec40000 - 000000005f6de23c to 012bd000 - 01d5b23c
>ACPI: RSDP 000f6c90 00024 (v02 IBM   )
>ACPI: XSDT 5f6e5c5e 0005C (v01 IBM    TP-75    00002010  LTP 00000000)
>ACPI: FACP 5f6e5d00 000F4 (v03 IBM    TP-75    00002010 IBM  00000001)
>ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527
>ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558
>ACPI: DSDT 5f6e5ee7 0EE9C (v01 IBM    TP-75    00002010 MSFT 0100000E)
>ACPI: FACS 5f6f6000 00040
>ACPI: SSDT 5f6e5eb4 00033 (v01 IBM    TP-75    00002010 MSFT 0100000E)
>ACPI: ECDT 5f6f4d83 00052 (v01 IBM    TP-75    00002010 IBM  00000001)
>ACPI: TCPA 5f6f4dd5 00032 (v01 IBM    TP-75    00002010 PTL  00000001)
>ACPI: APIC 5f6f4e07 0005A (v01 IBM    TP-75    00002010 IBM  00000001)
>ACPI: MCFG 5f6f4e61 0003E (v01 IBM    TP-75    00002010 IBM  00000001)
>ACPI: BOOT 5f6f4fd8 00028 (v01 IBM    TP-75    00002010  LTP 00000001)
>ACPI: Local APIC address 0xfee00000
>642MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 0000a000 - 00010e80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 00012b55cc]    TEXT DATA BSS ==> [0000400000 - 00012b55cc]
>  #4 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #5 [00012b6000 - 00012bc12c]              BRK ==> [00012b6000 - 00012bc12c]
>  #6 [0000007000 - 000000a000]          PGTABLE ==> [0000007000 - 000000a000]
>  #7 [00012bd000 - 0001d5b23d]      NEW RAMDISK ==> [00012bd000 - 0001d5b23d]
>  #8 [000000a000 - 0000011000]          BOOTMAP ==> [000000a000 - 0000011000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0005f6e0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0005f6e0
>On node 0 totalpages: 390783
>free_area_init_node: node 0, pgdat c0a6a6a0, node_mem_map c1d5c000
>  DMA zone: 60 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3939 pages, LIFO batch:0
>  Normal zone: 3255 pages used for memmap
>  Normal zone: 218951 pages, LIFO batch:31
>  HighMem zone: 2411 pages used for memmap
>  HighMem zone: 162167 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 60000000 (gap: 60000000:80000000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 334 pages at c33d5000, static data 1345756 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 385057
>Kernel command line: initrd=initrd0.img root=live:UUID=B2C4-2895 rootfstype=vfat rw liveimg overlay=UUID=B2C4-2895 quiet  rhgb  BOOT_IMAGE=vmlinuz0 
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 7817600 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:0005f6e0)
>Memory: 1503476k/1563520k available (4272k kernel code, 58780k reserved, 2364k data, 1768k init, 658312k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc0a7b000 - 0xc0c35000   (1768 kB)
>      .data : 0xc082c000 - 0xc0a7b000   (2364 kB)
>      .text : 0xc0400000 - 0xc082c000   (4272 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 1496.250 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:  8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:          4096
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 3743 kB
> per task-struct memory footprint: 1920 bytes
>ODEBUG: 9 of 9 active objects replaced
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.50 BogoMIPS (lpj=1496250)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Performance Counters: p6 PMU driver.
>... version:                 0
>... bit width:               32
>... generic counters:        2
>... value mask:              00000000ffffffff
>... max period:              000000007fffffff
>... fixed-purpose counters:  0
>... counter mask:            0000000000000003
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20387 entries in 40 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
>Brought up 1 CPUs
>Total of 1 processors activated (2992.50 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=60 bytes
>sizeof(inode)=652 bytes
>sizeof(dentry)=164 bytes
>sizeof(ext3inode)=912 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=192 bytes
>sizeof(task_struct)=5512 bytes
>CPU0 attaching NULL sched-domain.
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 21:04:08  Date: 11/08/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: EC: non-query interrupt received, switching to interrupt mode
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in interrupt mode
>ACPI: Power Resource [PUBS] (on)
>ACPI: ACPI Dock Station Driver: 3 docks/bays found
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xa0080000-0xa00fffff]
>pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
>pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xa0000000-0xa003ffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
>pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xa0040000-0xa00403ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
>pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
>pci 0000:00:1e.2: reg 18 32bit mmio: [0xa0040800-0xa00409ff]
>pci 0000:00:1e.2: reg 1c 32bit mmio: [0xa0040400-0xa00404ff]
>pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.2: PME# disabled
>pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
>pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
>pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.3: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
>pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15c0-15cf
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0x1810-0x181f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
>pci 0000:02:00.0: reg 10 64bit mmio: [0xa0100000-0xa010ffff]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.0: bridge 32bit mmio: [0xa0100000-0xa01fffff]
>pci 0000:04:00.0: reg 10 32bit mmio: [0xa0200000-0xa0200fff]
>pci 0000:04:00.0: supports D1 D2
>pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.0: PME# disabled
>pci 0000:04:00.1: reg 10 32bit mmio: [0xa0201000-0xa02010ff]
>pci 0000:04:00.1: supports D1 D2
>pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:04:00.1: PME# disabled
>pci 0000:04:02.0: reg 10 32bit mmio: [0xa0202000-0xa0202fff]
>pci 0000:04:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:04:02.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0x3000-0x6fff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xa0200000-0xafffffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>Expanded resource reserved due to conflict with Adapter ROM
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMA-API: preallocated 32768 debug entries
>DMA-API: debugging enabled by kernel config
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0x5fffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
>system 00:02: ioport range 0x1000-0x107f has been reserved
>system 00:02: ioport range 0x1180-0x11bf has been reserved
>system 00:02: ioport range 0x15e0-0x15ef has been reserved
>system 00:02: ioport range 0x1600-0x162f has been reserved
>system 00:02: ioport range 0x1632-0x167f has been reserved
>system 00:02: ioport range 0x15c0-0x15df has been reserved
>system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved
>system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xa0100000-0xa01fffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:04:00.0: CardBus bridge, secondary bus 0000:05
>pci 0000:04:00.0:   IO window: 0x003000-0x0030ff
>pci 0000:04:00.0:   IO window: 0x003400-0x0034ff
>pci 0000:04:00.0:   PREFETCH window: 0xd0000000-0xd3ffffff
>pci 0000:04:00.0:   MEM window: 0xa4000000-0xa7ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: 0x3000-0x6fff
>pci 0000:00:1e.0:   MEM window: 0xa0200000-0xafffffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 1 mem: [0xa0100000-0xa01fffff]
>pci_bus 0000:04: resource 0 io:  [0x3000-0x6fff]
>pci_bus 0000:04: resource 1 mem: [0xa0200000-0xafffffff]
>pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xd7ffffff]
>pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:05: resource 0 io:  [0x3000-0x30ff]
>pci_bus 0000:05: resource 1 io:  [0x3400-0x34ff]
>pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xd3ffffff]
>pci_bus 0000:05: resource 3 mem: [0xa4000000-0xa7ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 10872k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1257714249.387:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1673
>SELinux:  Registering netfilter hooks
>cryptomgr_test used greatest stack depth: 7060 bytes left
>cryptomgr_test used greatest stack depth: 6952 bytes left
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>ACPI: AC Adapter [AC] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SLPB]
>Marking TSC unstable due to TSC halts in idle
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (52 C)
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery absent)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>00:0a: ttyS0 at I/O 0x200 (irq = 5) is a NS16550A
>serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>serial 0000:00:1e.3: PCI INT B disabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>ahci 0000:00:1f.2: version 3.0
>ahci: probe of 0000:00:1f.2 failed with error -22
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xa0040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.1-56.fc12.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.1-56.fc12.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.1-56.fc12.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.1-56.fc12.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.1-56.fc12.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 1:373:95
>  hash matches drivers/base/power/main.c:416
>rtc_cmos 00:06: setting system clock to 2009-11-08 21:04:10 UTC (1257714250)
>Initalizing network drop monitor service
>ata1.00: ATA-6: HTC426060G9AT00, 00P3A0B4, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      HTC426060G9AT00  00P3 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>psmouse serio1: ID: 10 00 64
> sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 1768k freed
>NX-protecting the kernel data: c082c000, 2858 pages
>Write protecting the kernel text: 4272k
>Write protecting the kernel read-only data: 1776k
>mknod used greatest stack depth: 6816 bytes left
>mount used greatest stack depth: 6704 bytes left
>mount used greatest stack depth: 6424 bytes left
>mount used greatest stack depth: 6328 bytes left
>usb 1-4: new high speed USB device using ehci_hcd and address 2
>mknod used greatest stack depth: 6248 bytes left
>dracut: dracut-002-13.4.git8f397a9b.fc12
>dracut: root was live:/dev/disk/by-uuid/B2C4-2895, liveroot is now live:UUID=B2C4-2895
>udev: starting version 145
>usb 1-4: New USB device found, idVendor=0930, idProduct=6545
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4: Product: DataTraveler 2.0
>usb 1-4: Manufacturer: Kingston
>usb 1-4: SerialNumber: 5B8309003C7F
>usb 1-4: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input6
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[drm] Initialized drm 1.1.0 20060810
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>i915 0000:00:02.0: power state changed by ACPI to D0
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] TV-12: set mode NTSC 480i 0
>fbcon: inteldrmfb (fb0) is primary device
>render error detected, EIR: 0x00000010
>page table error
>  PGTBL_ER: 0x00000010
>[drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
>render error detected, EIR: 0x00000010
>page table error
>  PGTBL_ER: 0x00000010
>[drm] DAC-6: set mode 1600x1200 36
>async/0 used greatest stack depth: 6200 bytes left
>[drm] LVDS-8: set mode 1024x768 37
>usb 4-2: New USB device found, idVendor=0483, idProduct=2016
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: Biometric Coprocessor
>usb 4-2: Manufacturer: STMicroelectronics
>usb 4-2: configuration #1 chosen from 1 choice
>Console: switching to colour frame buffer device 128x48
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>modprobe used greatest stack depth: 4528 bytes left
>dracut: Starting plymouth daemon
>yenta_cardbus 0000:04:00.0: CardBus bridge found [1014:0555]
>yenta_cardbus 0000:04:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
>yenta_cardbus 0000:04:00.0: Socket status: 30000006
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x6fff: clean.
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
>yenta_cardbus 0000:04:00.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>dracut: Scanning devices sda2  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "VolGroup00" using metadata type lvm2
>Clocksource tsc unstable (delta = -70864568 ns)
>dracut: 2 logical volume(s) in volume group "VolGroup00" now active
>usb-storage: device scan complete
>scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: [sdb] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>dracut Warning: Unable to find persistent overlay; using temporary
>EXT4-fs (dm-2): barriers enabled
>kjournald2 starting: pid 330, dev dm-2:8, commit interval 5 seconds
>EXT4-fs (dm-2): internal journal on dm-2:8
>EXT4-fs (dm-2): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (dm-2): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/live-rw
>dracut: Loading SELinux policy
>type=1404 audit(1257714262.589:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 141611 rules.
>SELinux: 8192 avtab hash slots, 141611 rules.
>SELinux:  8 users, 12 roles, 2907 types, 129 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 141611 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-2, type ext4), uses xattr
>SELinux: initialized (dev loop2, type squashfs), not configured for labeling
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1257714263.580:3): policy loaded auid=4294967295 ses=4294967295
>dracut: Switching root
>udev: starting version 145
>tg3.c:v3.99 (April 20, 2009)
>tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:00.0: setting latency timer to 64
>NET: Registered protocol family 23
>tg3 0000:02:00.0: PME# disabled
>thinkpad_acpi: ThinkPad ACPI Extras v0.23
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 75ET55WW (2.01 ), EC 75HT19WW-1.01
>thinkpad_acpi: IBM ThinkPad X41 Tablet, model 18666SU
>thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
>eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:16:d3:20:79:87
>eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>nsc-ircc 00:09: activated
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
>input: ThinkPad Extra Buttons as /devices/virtual/input/input7
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>intel_rng: FWH not detected
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>ipw2200 0000:04:02.0: firmware: requesting ipw2200-bss.fw
>iTCO_vendor_support: vendor-support=0
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>intel8x0_measure_ac97_clock: measured 52502 usecs (11 samples)
>intel8x0: measured clock 209 rejected
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>intel8x0_measure_ac97_clock: measured 50854 usecs (2451 samples)
>intel8x0: clocking to 48000
>Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23
>Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
>ALSA sound/pci/ac97/ac97_codec.c:2163: MC'97 1 converters and GPIO not ready (0xff00)
>ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
>sdhci-pci 0000:04:00.1: SDHCI controller found [1180:0822] (rev 13)
>sdhci-pci 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:04:00.1] using PIO
>device-mapper: multipath: version 1.1.0 loaded
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>Adding 3112952k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:3112952k 
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
>platform microcode: firmware: requesting intel-ucode/06-0d-08
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Microcode Update Driver: v2.00 removed.
>P-state transition latency capped at 20 uS
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>tg3 0000:02:00.0: PME# disabled
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
>[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
>[drm] DAC-6: set mode 1600x1200 3f
>
><<<< At this point (after the DRM stuff above) do I turn on compiz >>>>
>
>eth1: no IPv6 routers present
>type=1307 audit(1257732351.527:27730):  cwd="/var/gdm"
>type=1302 audit(1257732351.527:27730): item=0 name="/dev/urandom" inode=3157 dev=00:10 mode=020666 ouid=0 ogid=0 rdev=01:09 obj=system_u:object_r:urandom_device_t:s0
>type=1307 audit(1257732351.530:27734):  cwd="/"
>type=1302 audit(1257732351.530:27734): item=0 name="/usr/share//mime/mime.cache" inode=14018 dev=fd:02 mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:usr_t:s0
>type=1307 audit(1257732351.525:27728):  cwd="/"
>type=1302 audit(1257732351.525:27728): item=0 name="/usr/lib/locale/locale-archive" inode=8167 dev=fd:02 mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:locale_t:s0
>fuse init (API version 7.12)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>lib80211_crypt: registered algorithm 'CCMP'
>[drm] DAC-6: set mode 1600x1200 45
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 530803: 368085 | 368086 | 368087