Attachment 368325 Details for Bug 533105 – dmesg file (after remove xorg.conf with autodetected display)

dmesg file (after remove xorg.conf with autodetected display)

dmesg-AfterRemoveXorg.txt (text/plain), 41.14 KB, created by A S Alam on 2009-11-10 03:21:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: A S Alam

Created: 2009-11-10 03:21:35 UTC

Size: 41.14 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009
>Command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset LANG=ne_NP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000006ff90000 (usable)
> BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data)
> BIOS-e820: 000000006ffa8000 - 000000006ffd0000 (ACPI NVS)
> BIOS-e820: 000000006ffd0000 - 0000000070000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x6ff90 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFFC0000000 write-back
>  1 base 000040000000 mask FFFFE0000000 write-back
>  2 base 000060000000 mask FFFFF0000000 write-back
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 20000000
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-000000006ff90000
> 0000000000 - 0040000000 page 1G
> 0040000000 - 006fe00000 page 2M
> 006fe00000 - 006ff90000 page 4k
>kernel direct mapping tables up to 6ff90000 @ 10000-13000
>RAMDISK: 374db000 - 37fef593
>ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM)
>ACPI: XSDT 000000006ff90100 00054 (v01 101409 XSDT1443 20091014 MSFT 00000097)
>ACPI: FACP 000000006ff90290 000F4 (v03 101409 FACP1443 20091014 MSFT 00000097)
>ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
>ACPI: DSDT 000000006ff90450 0D60E (v01  A1392 A1392001 00000001 INTL 20060113)
>ACPI: FACS 000000006ffa8000 00040
>ACPI: APIC 000000006ff90390 0007C (v01 101409 APIC1443 20091014 MSFT 00000097)
>ACPI: MCFG 000000006ff90410 0003C (v01 101409 OEMMCFG  20091014 MSFT 00000097)
>ACPI: OEMB 000000006ffa8040 00072 (v01 101409 OEMB1443 20091014 MSFT 00000097)
>ACPI: HPET 000000006ff9f450 00038 (v01 101409 OEMHPET  20091014 MSFT 00000097)
>ACPI: SSDT 000000006ff9f490 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000006ff90000
>Bootmem setup node 0 0000000000000000-000000006ff90000
>  NODE_DATA [0000000000012000 - 0000000000027fff]
>  bootmap [0000000000028000 -  0000000000035ff7] pages e
>(7 early reservations) ==> bootmem [0000000000 - 006ff90000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00019adb00]    TEXT DATA BSS ==> [0001000000 - 00019adb00]
>  #3 [00374db000 - 0037fef593]          RAMDISK ==> [00374db000 - 0037fef593]
>  #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
>  #5 [00019ae000 - 00019ae340]              BRK ==> [00019ae000 - 00019ae340]
>  #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
>found SMP MP-table at [ffff8800000ff780] ff780
> [ffffea0000000000-ffffea00019fffff] PMD -> [ffff880001e00000-ffff8800037fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009e
>    0: 0x00000100 -> 0x0006ff90
>On node 0 totalpages: 458526
>  DMA zone: 56 pages used for memmap
>  DMA zone: 102 pages reserved
>  DMA zone: 3824 pages, LIFO batch:0
>  DMA32 zone: 6215 pages used for memmap
>  DMA32 zone: 448329 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8300 base: 0xfed00000
>SMP: Allowing 6 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 70000000 (gap: 70000000:8f700000)
>NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
>PERCPU: Embedded 29 pages at ffff8800019bf000, static data 90080 bytes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 452153
>Policy zone: DMA32
>Kernel command line: ro root=/dev/mapper/VolGroup-lv_root nomodeset LANG=ne_NP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 5206000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 1785296k/1834560k available (4227k kernel code, 456k absent, 48808k reserved, 2926k data, 1324k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:456
>Extended CMOS year: 2000
>Fast TSC calibration using PIT
>Detected 3013.225 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 18350080 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>  alloc irq_desc for 24 on node 0
>  alloc kstat_irqs on node 0
>HPET: 4 timers in total, 1 timers will be used for per-cpu timer
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6026.44 BogoMIPS (lpj=3013221)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0x0 -> Node 0
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using C1E aware idle routine
>Performance Counters: AMD PMU driver.
>... version:                 0
>... bit width:               48
>... generic counters:        4
>... value mask:              0000ffffffffffff
>... max period:              00007fffffffffff
>... fixed-purpose counters:  0
>... counter mask:            000000000000000f
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20852 entries in 82 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X4 945 Processor stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6026.85 BogoMIPS (lpj=3013426)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 6 MCE banks
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Phenom(tm) II X4 945 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x2 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6026.84 BogoMIPS (lpj=3013424)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 2/0x2 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>mce: CPU supports 6 MCE banks
>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
>CPU2: AMD Phenom(tm) II X4 945 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x3 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6026.84 BogoMIPS (lpj=3013424)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 3/0x3 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>mce: CPU supports 6 MCE banks
>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
>CPU3: AMD Phenom(tm) II X4 945 Processor stepping 02
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (24106.99 BogoMIPS).
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=584 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=776 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=6008 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 0 1 2 3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 1 2 3 0
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 2 3 0 1
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 3 0 1 2
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time:  8:33:09  Date: 11/10/09
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>TOM: 0000000080000000 aka 2048M
>Fam 10h mmconf [e0000000, efffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, cfffffff]
>node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe7fffff]
>node 0 link 0: mmio [fe800000, fe9fffff]
>node 0 link 0: mmio [fea00000, ffefffff]
>bus: [00,07] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [a0000, bffff]
>bus: 00 index 2 mmio: [80000000, dfffffff]
>bus: 00 index 3 mmio: [f0000000, fcffffffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>PCI: Using configuration type 1 for extended access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI Warning: Incorrect checksum in table [OEMB] - 4B, should be 46 20090521 tbutils-246
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: PME# disabled
>pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
>pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
>pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
>pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
>pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
>pci 0000:00:11.0: reg 24 32bit mmio: [0xfe7ffc00-0xfe7fffff]
>pci 0000:00:11.0: set SATA to AHCI mode
>pci 0000:00:12.0: reg 10 32bit mmio: [0xfe7fe000-0xfe7fefff]
>pci 0000:00:12.1: reg 10 32bit mmio: [0xfe7fd000-0xfe7fdfff]
>pci 0000:00:12.2: reg 10 32bit mmio: [0xfe7ff800-0xfe7ff8ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:12.2: PME# disabled
>pci 0000:00:13.0: reg 10 32bit mmio: [0xfe7fc000-0xfe7fcfff]
>pci 0000:00:13.1: reg 10 32bit mmio: [0xfe7fb000-0xfe7fbfff]
>pci 0000:00:13.2: reg 10 32bit mmio: [0xfe7ff400-0xfe7ff4ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.2: PME# disabled
>pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
>pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
>pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
>pci 0000:00:14.2: reg 10 64bit mmio: [0xfe7f4000-0xfe7f7fff]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.2: PME# disabled
>pci 0000:00:14.5: reg 10 32bit mmio: [0xfe7fa000-0xfe7fafff]
>pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:01:05.0: reg 14 io port: [0xc000-0xc0ff]
>pci 0000:01:05.0: reg 18 32bit mmio: [0xfe9f0000-0xfe9fffff]
>pci 0000:01:05.0: reg 24 32bit mmio: [0xfe800000-0xfe8fffff]
>pci 0000:01:05.0: supports D1 D2
>pci 0000:01:05.1: reg 10 32bit mmio: [0xfe9e8000-0xfe9ebfff]
>pci 0000:01:05.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfe800000-0xfe9fffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
>pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
>pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff]
>pci 0000:02:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
>pci 0000:00:0a.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
>pci 0000:03:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
>pci 0000:03:08.0: reg 14 io port: [0xec00-0xec7f]
>pci 0000:03:08.0: supports D2
>pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
>pci 0000:03:08.0: PME# disabled
>pci 0000:00:14.4: transparent bridge
>pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
>pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>hpet: hpet2 irq 24 for MSI
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 14 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0x70000000-0x7fffffff has been reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0a: ioport range 0x40b-0x40b has been reserved
>system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
>system 00:0a: ioport range 0xc00-0xc01 has been reserved
>system 00:0a: ioport range 0xc14-0xc14 has been reserved
>system 00:0a: ioport range 0xc50-0xc51 has been reserved
>system 00:0a: ioport range 0xc52-0xc52 has been reserved
>system 00:0a: ioport range 0xc6c-0xc6c has been reserved
>system 00:0a: ioport range 0xc6f-0xc6f has been reserved
>system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
>system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
>system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
>system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
>system 00:0a: ioport range 0xcd8-0xcdf has been reserved
>system 00:0a: ioport range 0xb00-0xb3f has been reserved
>system 00:0a: ioport range 0x800-0x89f has been reserved
>system 00:0a: ioport range 0xb00-0xb0f has been reserved
>system 00:0a: ioport range 0xb20-0xb3f has been reserved
>system 00:0a: ioport range 0x900-0x90f has been reserved
>system 00:0a: ioport range 0x910-0x91f has been reserved
>system 00:0a: ioport range 0xfe00-0xfefe has been reserved
>system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
>system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
>system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
>system 00:0b: ioport range 0x230-0x23f has been reserved
>system 00:0b: ioport range 0x290-0x29f has been reserved
>system 00:0b: ioport range 0x300-0x30f has been reserved
>system 00:0b: ioport range 0xa30-0xa3f has been reserved
>system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0d: iomem range 0x0-0x9ffff could not be reserved
>system 00:0d: iomem range 0xc0000-0xcffff has been reserved
>system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0d: iomem range 0x100000-0x6fffffff could not be reserved
>system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xc000-0xcfff
>pci 0000:00:01.0:   MEM window: 0xfe800000-0xfe9fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0a.0:   IO window: 0xd000-0xdfff
>pci 0000:00:0a.0:   MEM window: 0xfea00000-0xfeafffff
>pci 0000:00:0a.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
>pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
>pci 0000:00:14.4:   IO window: 0xe000-0xefff
>pci 0000:00:14.4:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:14.4:   PREFETCH window: disabled
>  alloc irq_desc for 18 on node 0
>  alloc kstat_irqs on node 0
>pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:0a.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe9fffff]
>pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
>pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
>pci_bus 0000:03: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 11345k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1257841989.560:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 3509
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:05.0: Boot video device
>  alloc irq_desc for 25 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0a.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:0a.0: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>ahci 0000:00:11.0: version 3.0
>  alloc irq_desc for 22 on node 0
>  alloc kstat_irqs on node 0
>ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 22
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 17 on node 0
>  alloc kstat_irqs on node 0
>ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:12.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>  alloc irq_desc for 19 on node 0
>  alloc kstat_irqs on node 0
>ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe7ff400
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:13.2
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>  alloc irq_desc for 16 on node 0
>  alloc kstat_irqs on node 0
>ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe7fe000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
>usb usb3: SerialNumber: 0000:00:12.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe7fd000
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
>usb usb4: SerialNumber: 0000:00:12.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fc000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.0
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe7fb000
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.1
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fa000
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: OHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
>usb usb7: SerialNumber: 0000:00:14.5
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 1:657:573
>rtc_cmos 00:03: setting system clock to 2009-11-10 08:33:10 UTC (1257841990)
>Initalizing network drop monitor service
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>usb 1-2: new high speed USB device using ehci_hcd and address 2
>usb 1-2: New USB device found, idVendor=05ac, idProduct=1006
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Keyboard Hub
>usb 1-2: Manufacturer: Apple, Inc.
>usb 1-2: SerialNumber: 000000000000
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 3 ports detected
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATAPI: Optiarc DVD RW AD-7240S, 1.02, max UDMA/100, ATAPI AN
>ata3.00: configured for UDMA/100
>ata1.00: ATA-7: WDC WD1600AABS-61PRA0, 05.06H05, max UDMA/133
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AABS-6 05.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7240S  1.02 PQ: 0 ANSI: 5
> sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
> sda5 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 1324k freed
>Write protecting the kernel read-only data: 6344k
>dracut: dracut-002-13.4.git8f397a9b.fc12
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>[drm] VGACON disable radeon kernel modesetting.
>pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:01:05.0: setting latency timer to 64
>[drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
>dracut: Starting plymouth daemon
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_atiixp 0000:00:14.1: setting latency timer to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
>usb 4-3: new low speed USB device using ohci_hcd and address 2
>usb 4-3: New USB device found, idVendor=0461, idProduct=4d22
>usb 4-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 4-3: Product: USB Optical Mouse
>usb 4-3: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input3
>generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.1-3/input0
>usb 1-2.2: new low speed USB device using ehci_hcd and address 4
>usb 1-2.2: New USB device found, idVendor=05ac, idProduct=0220
>usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.2: Product: Apple Keyboard
>usb 1-2.2: Manufacturer: Apple, Inc
>usb 1-2.2: configuration #1 chosen from 1 choice
>input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.0/input/input4
>apple 0003:05AC:0220.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:12.2-2.2/input0
>input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.2/1-2.2:1.1/input/input5
>apple 0003:05AC:0220.0003: input,hidraw2: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:12.2-2.2/input1
>dracut: Scanning devices sda5  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "VolGroup" using metadata type lvm2
>dracut: 3 logical volume(s) in volume group "VolGroup" now active
>dracut: luksOpen /dev/dm-2 luks-98582cf7-104e-4a25-a9dc-4f90aa45a1da
>Intel AES-NI instructions are not detected.
>padlock: VIA PadLock not detected.
>Buffer I/O error on device dm-3, logical block 64
>Buffer I/O error on device dm-3, logical block 65
>Buffer I/O error on device dm-3, logical block 66
>Buffer I/O error on device dm-3, logical block 67
>Buffer I/O error on device dm-3, logical block 68
>device-mapper: ioctl: unable to remove open device temporary-cryptsetup-332
>Buffer I/O error on device dm-3, logical block 69
>Buffer I/O error on device dm-3, logical block 70
>Buffer I/O error on device dm-3, logical block 71
>Buffer I/O error on device dm-3, logical block 72
>Buffer I/O error on device dm-3, logical block 73
>EXT4-fs (dm-0): barriers enabled
>kjournald2 starting: pid 386, dev dm-0:8, commit interval 5 seconds
>EXT4-fs (dm-0): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
>dracut: Loading SELinux policy
>SELinux: 8192 avtab hash slots, 144734 rules.
>SELinux: 8192 avtab hash slots, 144734 rules.
>SELinux:  8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 144734 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>dracut: Switching root
>udev: starting version 145
>ACPI: WMI: Mapper loaded
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>r8169 0000:02:00.0: setting latency timer to 64
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>r8169 0000:02:00.0: irq 26 for MSI/MSI-X
>eth0: RTL8168d/8111d at 0xffffc90011300000, 90:e6:ba:b9:77:77, XID 283000c0 IRQ 26
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>ppdev: user-space parallel port driver
>EDAC MC: Ver: 2.1.0 Nov  7 2009
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>firewire_ohci 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>EDAC amd64_edac:  Ver: 3.2.0 Nov  7 2009
>EDAC amd64: This node reports that Memory ECC is currently disabled.
>EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
>EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
>    Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
>    Might be a BIOS bug, if BIOS says ECC is enabled
>    Use of the override can cause unknown side effects.
>amd64_edac: probe of 0000:00:18.2 failed with error -22
>firewire_ohci: Added fw-ohci device 0000:03:08.0, OHCI version 1.10
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>__ratelimit: 137 callbacks suppressed
>type=1400 audit(1257821307.499:4): avc:  denied  { mmap_zero } for  pid=730 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
>ALSA sound/pci/hda/hda_codec.c:3862: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
>ALSA sound/pci/hda/hda_codec.c:3866:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3870:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:3871:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:3874:    dig-out=0x20/0x21
>ALSA sound/pci/hda/hda_codec.c:3882:    inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x0, aux=0x0
>HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.1: setting latency timer to 64
>firewire_core: created device fw0: GUID 1e00000000008c00, S400
>type=1400 audit(1257821309.949:5): avc:  denied  { execute } for  pid=853 comm="plymouth" name="cryptsetup" dev=dm-0 ino=12708 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_exec_t:s0 tclass=file
>type=1400 audit(1257821309.949:6): avc:  denied  { read open } for  pid=853 comm="plymouth" name="cryptsetup" dev=dm-0 ino=12708 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_exec_t:s0 tclass=file
>type=1400 audit(1257821309.949:7): avc:  denied  { execute_no_trans } for  pid=853 comm="plymouth" path="/sbin/cryptsetup" dev=dm-0 ino=12708 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_exec_t:s0 tclass=file
>type=1400 audit(1257821309.950:8): avc:  denied  { read } for  pid=853 comm="cryptsetup" name="devices" dev=proc ino=4026531985 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=file
>type=1400 audit(1257821309.950:9): avc:  denied  { open } for  pid=853 comm="cryptsetup" name="devices" dev=proc ino=4026531985 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=file
>type=1400 audit(1257821309.950:10): avc:  denied  { getattr } for  pid=853 comm="cryptsetup" path="/proc/devices" dev=proc ino=4026531985 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=file
>type=1400 audit(1257821309.950:11): avc:  denied  { getattr } for  pid=853 comm="cryptsetup" path="/dev/mapper/control" dev=tmpfs ino=3323 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
>type=1400 audit(1257821309.950:12): avc:  denied  { read write } for  pid=853 comm="cryptsetup" name="control" dev=tmpfs ino=3323 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
>type=1400 audit(1257821309.950:13): avc:  denied  { open } for  pid=853 comm="cryptsetup" name="control" dev=tmpfs ino=3323 scontext=system_u:system_r:plymouth_t:s0 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
>device-mapper: multipath: version 1.1.0 loaded
>EXT4-fs (dm-0): internal journal on dm-0:8
>EXT4-fs (sda3): barriers enabled
>kjournald2 starting: pid 902, dev sda3:8, commit interval 5 seconds
>EXT4-fs (sda3): internal journal on sda3:8
>EXT4-fs (sda3): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda3): mounted filesystem with ordered data mode
>SELinux: initialized (dev sda3, type ext4), uses xattr
>EXT4-fs (dm-3): barriers enabled
>kjournald2 starting: pid 903, dev dm-3:8, commit interval 5 seconds
>EXT4-fs (dm-3): internal journal on dm-3:8
>EXT4-fs (dm-3): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (dm-3): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-3, type ext4), uses xattr
>Adding 3604472k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:3604472k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>powernow-k8: Found 1 AMD Phenom(tm) II X4 945 Processor processors (4 cpu cores) (version 2.20.00)
>powernow-k8:    0 : pstate 0 (3000 MHz)
>powernow-k8:    1 : pstate 1 (2300 MHz)
>powernow-k8:    2 : pstate 2 (1800 MHz)
>powernow-k8:    3 : pstate 3 (800 MHz)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>r8169: eth0: link up
>r8169: eth0: link up
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[drm] Setting GART location based on new memory map
>[drm] Loading RS780 CP Microcode
>platform r600_cp.0: firmware: requesting radeon/RS780_pfp.bin
>platform r600_cp.0: firmware: requesting radeon/RS780_me.bin
>[drm] Resetting GPU
>[drm] writeback test succeeded in 1 usecs
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU2 attaching NULL sched-domain.
>CPU3 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 0 1 2 3
>CPU1 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 1 2 3 0
>CPU2 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 2 3 0 1
>CPU3 attaching sched-domain:
> domain 0: span 0-3 level MC
>  groups: 3 0 1 2
>hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
>eth0: no IPv6 routers present
>fuse init (API version 7.12)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 533105: 367556 | 368078 | 368079 | 368080 | 368324 | 368325