Attachment 377293 Details for Bug 542275 – dmesg output

dmesg output

dmesg (text/plain), 32.95 KB, created by Jacob Church on 2009-12-09 20:22:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jacob Church

Created: 2009-12-09 20:22:04 UTC

Size: 32.95 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31.6-162.fc12.i686 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Fri Dec 4 01:09:09 EST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d8010 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
> BIOS-e820: 000000005fff0000 - 000000005fff8000 (ACPI data)
> BIOS-e820: 000000005fff8000 - 0000000060000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x5fff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FC0000000 write-back
>  1 base 040000000 mask FE0000000 write-back
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01000000
>init_memory_mapping: 0000000000000000-00000000373fe000
>Using x86 segment limits to approximate NX protection
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 10000-16000
>RAMDISK: 3757f000 - 37fef78a
>Allocated new RAMDISK: 00ac8000 - 0153878a
>Move RAMDISK from 000000003757f000 - 0000000037fef789 to 00ac8000 - 01538789
>ACPI: RSDP 000fa3b0 00014 (v00 AMI   )
>ACPI: RSDT 5fff0000 0002C (v01 AMIINT INTEL865 00000010 MSFT 00000097)
>ACPI: FACP 5fff0030 00081 (v01 AMIINT INTEL865 00000011 MSFT 00000097)
>ACPI: DSDT 5fff0120 0375D (v01  INTEL    I865G 00001000 MSFT 0100000D)
>ACPI: FACS 5fff8000 00040
>ACPI: APIC 5fff00c0 0005C (v01 AMIINT INTEL865 00000009 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>651MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 00013000 - 00019e80
>(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000ac2a10]    TEXT DATA BSS ==> [0000400000 - 0000ac2a10]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000ac3000 - 0000ac7145]              BRK ==> [0000ac3000 - 0000ac7145]
>  #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>  #7 [0000ac8000 - 000153878a]      NEW RAMDISK ==> [0000ac8000 - 000153878a]
>  #8 [0000013000 - 000001a000]          BOOTMAP ==> [0000013000 - 000001a000]
>found SMP MP-table at [c00fc120] fc120
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0005fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0005fff0
>On node 0 totalpages: 393087
>free_area_init_node: node 0, pgdat c0978380, node_mem_map c1539200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 1304 pages used for memmap
>  HighMem zone: 165594 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
>PM: Registered nosave memory: 00000000000d8000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages at c2140000, static data 34428 bytes
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390015
>Kernel command line: ro root=/dev/mapper/vg_heihachi-lv_root  LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 7863680 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:0005fff0)
>Memory: 1532820k/1572800k available (3496k kernel code, 38564k reserved, 2169k data, 432k init, 667592k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc0989000 - 0xc09f5000   ( 432 kB)
>      .data : 0xc076a10b - 0xc09885a8   (2169 kB)
>      .text : 0xc0400000 - 0xc076a10b   (3496 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Fast TSC calibration using PIT
>Detected 3042.760 MHz processor.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6085.52 BogoMIPS (lpj=3042760)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Performance Counters: no PMU driver, software counters only.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090521
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20208 entries in 40 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6084.04 BogoMIPS (lpj=3042024)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU1: Thermal monitoring enabled (TM1)
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (12169.56 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=500 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=192 bytes
>sizeof(task_struct)=3256 bytes
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 1 0
>Booting paravirtualized kernel on bare hardware
>regulator: core version 0.5
>Time: 11:45:31  Date: 12/09/09
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:00.0: Enabling MCH 'Overflow' Device
>pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
>pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
>pci 0000:00:1d.0: reg 20 io port: [0xe000-0xe01f]
>pci 0000:00:1d.1: reg 20 io port: [0xe400-0xe41f]
>pci 0000:00:1d.2: reg 20 io port: [0xe800-0xe81f]
>pci 0000:00:1d.3: reg 20 io port: [0xec00-0xec1f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xffeffc00-0xffefffff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
>pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
>pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
>pci 0000:00:1f.2: reg 20 io port: [0xfc00-0xfc0f]
>pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
>pci 0000:00:1f.5: reg 10 io port: [0xdc00-0xdcff]
>pci 0000:00:1f.5: reg 14 io port: [0xd800-0xd83f]
>pci 0000:00:1f.5: reg 18 32bit mmio: [0xffeffa00-0xffeffbff]
>pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffeff900-0xffeff9ff]
>pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1f.5: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
>pci 0000:01:00.0: reg 14 io port: [0xb800-0xb8ff]
>pci 0000:01:00.0: reg 18 32bit mmio: [0xffcf0000-0xffcfffff]
>pci 0000:01:00.0: reg 30 32bit mmio: [0xffcc0000-0xffcdffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 32bit mmio: [0xffce0000-0xffceffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xffc00000-0xffcfffff]
>pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff]
>pci 0000:02:01.0: reg 10 io port: [0xcc00-0xcc3f]
>pci 0000:02:01.0: supports D2
>pci 0000:02:0b.0: reg 10 io port: [0xc800-0xc8ff]
>pci 0000:02:0b.0: reg 14 32bit mmio: [0xffdfff00-0xffdfffff]
>pci 0000:02:0b.0: reg 30 32bit mmio: [0xffde0000-0xffdeffff]
>pci 0000:02:0b.0: supports D1 D2
>pci 0000:02:0b.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:0b.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xffd00000-0xffdfffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: ioport range 0x290-0x297 has been reserved
>system 00:01: ioport range 0x3f0-0x3f1 has been reserved
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0x400-0x43f has been reserved
>system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
>pci 0000:02:0b.0: BAR 6: address space collision on of device [0xffde0000-0xffdeffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xb000-0xbfff
>pci 0000:00:01.0:   MEM window: 0xffc00000-0xffcfffff
>pci 0000:00:01.0:   PREFETCH window: 0xd7f00000-0xf7efffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1e.0:   IO window: 0xc000-0xcfff
>pci 0000:00:1e.0:   MEM window: 0xffd00000-0xffdfffff
>pci 0000:00:1e.0:   PREFETCH window: 0x60000000-0x600fffff
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0xb000-0xbfff]
>pci_bus 0000:01: resource 1 mem: [0xffc00000-0xffcfffff]
>pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff]
>pci_bus 0000:02: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:02: resource 1 mem: [0xffd00000-0xffdfffff]
>pci_bus 0000:02: resource 2 pref mem [0x60000000-0x600fffff]
>pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 10689k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1260359131.553:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1712
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>processor LNXCPU:01: registered as cooling_device1
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 865 Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffeffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31.6-162.fc12.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31.6-162.fc12.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.31.6-162.fc12.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.31.6-162.fc12.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.31.6-162.fc12.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 5:115:782
>rtc_cmos 00:04: setting system clock to 2009-12-09 11:45:32 UTC (1260359132)
>Initalizing network drop monitor service
>ata1.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB03, max UDMA/100
>ata2.00: ATA-7: ExcelStor Technology J8160S, P22OABEA, max UDMA/133
>ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223Q  SB03 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>scsi 1:0:0:0: Direct-Access     ATA      ExcelStor Techno P22O PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 1:0:0:0: Attached scsi generic sg1 type 0
> sda1 sda2 sda3
>sd 1:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 432k freed
>Write protecting the kernel text: 3500k
>Write protecting the kernel read-only data: 1692k
>dracut: dracut-002-13.4.git8f397a9b.fc12
>udev: starting version 145
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFFCF0000
>[drm] register mmio size: 65536
>ATOM BIOS: RADEON
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Generation 2 PCI interface, using max accessible memory
>agpgart-intel 0000:00:00.0: AGP 3.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V3 device into 4x mode
>radeon 0000:01:00.0: putting AGP V3 device into 4x mode
>[drm] radeon: VRAM 256M
>[drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
>[drm] radeon: GTT 64M
>[drm] radeon: GTT from 0xF8000000 to 0xFBFFFFFF
>radeon 0000:01:00.0: irq 24 for MSI/MSI-X
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 438658 kiB.
>[TTM] Zone highmem: Available graphics memory: 772454 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 64M of GTT memory ready.
>[drm] radeon: 2 quad pipes, 1 z pipes initialized.
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R400 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R420_cp.bin
>[drm] radeon: ring at 0x00000000F8000000
>[drm] ring test succeeded in 0 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>usb 1-4: new high speed USB device using ehci_hcd and address 4
>usb 1-4: New USB device found, idVendor=04a9, idProduct=1712
>usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-4: Product: MP530
>usb 1-4: Manufacturer: Canon
>usb 1-4: SerialNumber: 1465AB
>usb 1-4: configuration #1 chosen from 1 choice
>[drm] fb mappable at 0xE0040000
>[drm] vram apper at 0xE0000000
>[drm] size 11059200
>[drm] fb depth is 24
>[drm]    pitch is 7680
>fbcon: radeondrmfb (fb0) is primary device
>[drm] DAC-10: set mode 1920x1440 2b
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>[drm] TMDS-12: set mode 1280x1024 2c
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>usb 2-1: New USB device found, idVendor=045e, idProduct=00e1
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: Microsoft Wireless Optical MouseÂ® 1.00
>usb 2-1: Manufacturer: Microsoft
>usb 2-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wireless Optical MouseÂ® 1.00 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
>generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical MouseÂ® 1.00] on usb-0000:00:1d.0-1/input0
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: New USB device found, idVendor=0518, idProduct=0001
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: USB-compliant keyboard
>usb 3-1: Manufacturer: Plus More Enterprise LTD.
>usb 3-1: configuration #1 chosen from 1 choice
>input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input4
>generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.1-1/input0
>input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input5
>generic-usb 0003:0518:0001.0003: input,hidraw2: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.1-1/input1
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>dracut: Scanning devices sda3  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "vg_heihachi" using metadata type lvm2
>dracut: 2 logical volume(s) in volume group "vg_heihachi" now active
>EXT4-fs (dm-0): barriers enabled
>kjournald2 starting: pid 262, dev dm-0:8, commit interval 5 seconds
>EXT4-fs (dm-0): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/vg_heihachi-lv_root
>dracut: Loading SELinux policy
>type=1404 audit(1260359138.922:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 8192 avtab hash slots, 142643 rules.
>SELinux: 8192 avtab hash slots, 142643 rules.
>SELinux:  8 users, 12 roles, 2972 types, 139 bools, 1 sens, 1024 cats
>SELinux:  75 classes, 142643 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1260359139.271:3): policy loaded auid=4294967295 ses=4294967295
>dracut: Switching root
>udev: starting version 145
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>ppdev: user-space parallel port driver
><6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ACPI: I/O resource 0000:00:1f.3 [0xc00-0xc1f] conflicts with ACPI region SMOV [0xc00-0xc06]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>eth0: RealTek RTL8139 at 0xf92ecf00, 00:0c:76:ba:38:f1, IRQ 23
>Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>Intel ICH 0000:00:1f.5: setting latency timer to 64
>intel8x0_measure_ac97_clock: measured 51569 usecs (2486 samples)
>intel8x0: clocking to 48000
>ENS1371 0000:02:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04A9 pid 0x1712
>usblp1: USB Bidirectional printer dev 4 if 2 alt 0 proto 2 vid 0x04A9 pid 0x1712
>usbcore: registered new interface driver usblp
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>end_request: I/O error, dev fd0, sector 0
>Buffer I/O error on device fd0, logical block 0
>device-mapper: multipath: version 1.1.0 loaded
>EXT4-fs (dm-0): internal journal on dm-0:8
>EXT4-fs (sda2): barriers enabled
>kjournald2 starting: pid 712, dev sda2:8, commit interval 5 seconds
>EXT4-fs (sda2): internal journal on sda2:8
>EXT4-fs (sda2): delayed allocation enabled
>EXT4-fs: file extents enabled
>EXT4-fs: mballoc enabled
>EXT4-fs (sda2): mounted filesystem with ordered data mode
>SELinux: initialized (dev sda2, type ext4), uses xattr
>Adding 3112952k swap on /dev/mapper/vg_heihachi-lv_swap.  Priority:-1 extents:1 across:3112952k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>microcode: CPU0 sig=0xf29, pf=0x4, revision=0x17
>platform microcode: firmware: requesting intel-ucode/0f-02-09
>microcode: CPU1 sig=0xf29, pf=0x4, revision=0x17
>platform microcode: firmware: requesting intel-ucode/0f-02-09
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated to revision 0x2e, date = 2004-08-11 
>microcode: CPU1 updated to revision 0x2e, date = 2004-08-11 
>Microcode Update Driver: v2.00 removed.
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
>[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
>[drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[drm] DAC-10: set mode 1280x1024 30
>[drm] TMDS-12: set mode 1280x1024 33
>CPU0 attaching NULL sched-domain.
>CPU1 attaching NULL sched-domain.
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 0 1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level SIBLING
>  groups: 1 0
>eth0: no IPv6 routers present
>type=1305 audit(1260359201.418:25651): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
>metacity[1405]: segfault at 616d2078 ip 004309e1 sp bf9ce140 error 6 in libSM.so.6.0.0 (deleted)[42f000+7000]
>fuse init (API version 7.12)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 542275: 377293 | 377294