Attachment 383601 Details for Bug 554602 – Syslog file from failed F12 boot from DVD

Syslog file from failed F12 boot from DVD

syslog (text/plain), 47.36 KB, created by JOhn Westerdale on 2010-01-14 02:55:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: JOhn Westerdale

Created: 2010-01-14 02:55:10 UTC

Size: 47.36 KB

patch

obsolete

><6>Initializing cgroup subsys cpuset
><6>Initializing cgroup subsys cpu
><5>Linux version 2.6.31.5-127.fc12.x86_64 (mockbuild@x86-4.fedora.phx.redhat.com) (gcc version 4.4.2 20091027 (Red Hat 4.4.2-7) (GCC) ) #1 SMP Sat Nov 7 21:11:14 EST 2009
><6>Command line: initrd=initrd.img stage2=hd:LABEL="Fedora" rescue BOOT_IMAGE=vmlinuz 
><6>KERNEL supported cpus:
><6>  Intel GenuineIntel
><6>  AMD AuthenticAMD
><6>  Centaur CentaurHauls
><6>BIOS-provided physical RAM map:
><6> BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
><6> BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
><6> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
><6> BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
><6> BIOS-e820: 000000007ff80000 - 000000007ff91000 (ACPI data)
><6> BIOS-e820: 000000007ff91000 - 0000000080000000 (ACPI NVS)
><6> BIOS-e820: 0000000080000000 - 00000000bff80000 (usable)
><6> BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved)
><6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
><6> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
><6> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><6> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><6> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
><6>DMI present.
><5>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
><7>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
><6>last_pfn = 0x140000 max_arch_pfn = 0x400000000
><7>MTRR default type: uncachable
><7>MTRR fixed ranges enabled:
><7>  00000-9FFFF write-back
><7>  A0000-BFFFF uncachable
><7>  C0000-D7FFF write-protect
><7>  D8000-E3FFF uncachable
><7>  E4000-FFFFF write-protect
><7>MTRR variable ranges enabled:
><7>  0 base 0000000000 mask FF00000000 write-back
><7>  1 base 0100000000 mask FFC0000000 write-back
><7>  2 base 00C0000000 mask FFC0000000 uncachable
><7>  3 disabled
><7>  4 disabled
><7>  5 disabled
><7>  6 disabled
><7>  7 disabled
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><7>original variable MTRRs
><7>reg 0, base: 0GB, range: 4GB, type WB
><7>reg 1, base: 4GB, range: 1GB, type WB
><7>reg 2, base: 3GB, range: 1GB, type UC
><6>total RAM coverred: 4096M
><6>Found optimal setting for mtrr clean up
><6> gran_size: 64K 	chunk_size: 64K 	num_reg: 3  	lose cover RAM: 0G
><7>New variable MTRRs
><7>reg 0, base: 0GB, range: 2GB, type WB
><7>reg 1, base: 2GB, range: 1GB, type WB
><7>reg 2, base: 4GB, range: 1GB, type WB
><6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
><7>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
><6>last_pfn = 0xbff80 max_arch_pfn = 0x400000000
><7>initial memory mapped : 0 - 20000000
><6>init_memory_mapping: 0000000000000000-00000000bff80000
><7> 0000000000 - 00bfe00000 page 2M
><7> 00bfe00000 - 00bff80000 page 4k
><7>kernel direct mapping tables up to bff80000 @ 10000-15000
><6>init_memory_mapping: 0000000100000000-0000000140000000
><7> 0100000000 - 0140000000 page 2M
><7>kernel direct mapping tables up to 140000000 @ 13000-19000
><6>RAMDISK: 7e8eb000 - 7ff5e474
><4>ACPI: RSDP 00000000000f78c0 00014 (v00 PTLTD )
><4>ACPI: RSDT 000000007ff8b584 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
><4>ACPI: FACP 000000007ff90e76 00074 (v01 NVIDIA CK8S     06040000 PTL_ 000F4240)
><4>ACPI: DSDT 000000007ff8b5b8 058BE (v01 NVIDIA      CK8 06040000 MSFT 0100000E)
><4>ACPI: FACS 000000007ff91fc0 00040
><4>ACPI: SPCR 000000007ff90eea 00050 (v01 PTLTD  $UCRTBL$ 06040000 PTL  00000001)
><4>ACPI: APIC 000000007ff90f3a 0009E (v01 PTLTD  	 APIC   06040000  LTP 00000000)
><4>ACPI: BOOT 000000007ff90fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
><7>ACPI: Local APIC address 0xfee00000
><6>Scanning NUMA topology in Northbridge 24
><6>Number of nodes 2
><3>Node 0 using interleaving mode 1/0
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-0000000140000000
><6>Bootmem setup node 0 0000000000000000-0000000140000000
><6>  NODE_DATA [0000000000014000 - 0000000000029fff]
><6>  bootmap [000000000002a000 -  0000000000051fff] pages 28
><6>(8 early reservations) ==> bootmem [0000000000 - 0140000000]
><6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
><6>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
><6>  #2 [0001000000 - 00019adb00]    TEXT DATA BSS ==> [0001000000 - 00019adb00]
><6>  #3 [007e8eb000 - 007ff5e474]          RAMDISK ==> [007e8eb000 - 007ff5e474]
><6>  #4 [000009b400 - 0000100000]    BIOS reserved ==> [000009b400 - 0000100000]
><6>  #5 [00019ae000 - 00019ae19c]              BRK ==> [00019ae000 - 00019ae19c]
><6>  #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
><6>  #7 [0000013000 - 0000014000]          PGTABLE ==> [0000013000 - 0000014000]
><6>found SMP MP-table at [ffff8800000f7830] f7830
><7> [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0
><4>Zone PFN ranges:
><4>  DMA      0x00000010 -> 0x00001000
><4>  DMA32    0x00001000 -> 0x00100000
><4>  Normal   0x00100000 -> 0x00140000
><4>Movable zone start PFN for each node
><4>early_node_map[4] active PFN ranges
><4>    0: 0x00000010 -> 0x0000009b
><4>    0: 0x00000100 -> 0x0007ff80
><4>    0: 0x00080000 -> 0x000bff80
><4>    0: 0x00100000 -> 0x00140000
><7>On node 0 totalpages: 1048203
><7>  DMA zone: 56 pages used for memmap
><7>  DMA zone: 107 pages reserved
><7>  DMA zone: 3816 pages, LIFO batch:0
><7>  DMA32 zone: 14280 pages used for memmap
><7>  DMA32 zone: 767800 pages, LIFO batch:31
><7>  Normal zone: 3584 pages used for memmap
><7>  Normal zone: 258560 pages, LIFO batch:31
><6>Nvidia board detected. Ignoring ACPI timer override.
><6>If you got timer trouble try acpi_use_timer_override
><6>Detected use of extended apic ids on hypertransport bus
><6>Detected use of extended apic ids on hypertransport bus
><6>ACPI: PM-Timer IO Port: 0x8008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
><6>ACPI: IOAPIC (id[0x05] address[0xd8000000] gsi_base[24])
><6>IOAPIC[1]: apic_id 5, version 17, address 0xd8000000, GSI 24-27
><6>ACPI: IOAPIC (id[0x06] address[0xd8001000] gsi_base[28])
><6>IOAPIC[2]: apic_id 6, version 17, address 0xd8001000, GSI 28-31
><6>ACPI: IOAPIC (id[0x07] address[0xd8400000] gsi_base[32])
><6>IOAPIC[3]: apic_id 7, version 17, address 0xd8400000, GSI 32-55
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
><7>ACPI: IRQ9 used by override.
><6>Using ACPI (MADT) for SMP configuration information
><6>SMP: Allowing 4 CPUs, 0 hotplug CPUs
><7>nr_irqs_gsi: 56
><6>PM: Registered nosave memory: 000000000009b000 - 000000000009c000
><6>PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
><6>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
><6>PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
><6>PM: Registered nosave memory: 000000007ff80000 - 000000007ff91000
><6>PM: Registered nosave memory: 000000007ff91000 - 0000000080000000
><6>PM: Registered nosave memory: 00000000bff80000 - 00000000c0000000
><6>PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
><6>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
><6>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
><6>PM: Registered nosave memory: 00000000fec00000 - 00000000fee00000
><6>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
><6>PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
><6>PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
><6>Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
><6>NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
><6>PERCPU: Embedded 29 pages at ffff880028022000, static data 90080 bytes
><4>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030176
><4>Policy zone: Normal
><5>Kernel command line: initrd=initrd.img stage2=hd:LABEL="Fedora" rescue BOOT_IMAGE=vmlinuz 
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Initializing CPU#0
><6>Checking aperture...
><6>No AGP bridge found
><6>Node 0: aperture @ 0 size 32 MB
><6>Your BIOS doesn't leave a aperture memory hole
><6>Please enable the IOMMU option in the BIOS setup
><6>This costs you 64 MB of RAM
><6>Mapping aperture over 65536 KB of RAM @ 20000000
><6>PM: Registered nosave memory: 0000000020000000 - 0000000024000000
><6>Memory: 4036252k/5242880k available (4227k kernel code, 1050068k absent, 156560k reserved, 2926k data, 1324k init)
><6>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
><6>Hierarchical RCU implementation.
><6>NR_IRQS:4352 nr_irqs:984
><4>Fast TSC calibration using PIT
><4>Detected 2611.515 MHz processor.
><7>spurious 8259A interrupt: IRQ7.
><4>Console: colour VGA+ 80x25
><6>console [tty0] enabled
><6>allocated 41943040 bytes of page_cgroup
><6>please try 'cgroup_disable=memory' option if you don't want memory cgroups
><6>Calibrating delay loop (skipped), value calculated using timer frequency.. 5223.03 BogoMIPS (lpj=2611515)
><6>Security Framework initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><6>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Mount-cache hash table entries: 256
><6>Initializing cgroup subsys ns
><6>Initializing cgroup subsys cpuacct
><6>Initializing cgroup subsys memory
><6>Initializing cgroup subsys devices
><6>Initializing cgroup subsys freezer
><6>Initializing cgroup subsys net_cls
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 1024K (64 bytes/line)
><6>CPU 0/0x0 -> Node 0
><7>tseg: 00bff80000
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>mce: CPU supports 5 MCE banks
><6>Performance Counters: AMD PMU driver.
><6>... version:                 0
><6>... bit width:               48
><6>... generic counters:        4
><6>... value mask:              0000ffffffffffff
><6>... max period:              00007fffffffffff
><6>... fixed-purpose counters:  0
><6>... counter mask:            000000000000000f
><6>ACPI: Core revision 20090521
><6>ftrace: converting mcount calls to 0f 1f 44 00 00
><6>ftrace: allocating 20852 entries in 82 pages
><6>Setting APIC routing to flat
><6>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
><6>CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
><6>Booting processor 1 APIC 0x1 ip 0x6000
><6>Initializing CPU#1
><6>Calibrating delay using timer specific routine.. 5222.98 BogoMIPS (lpj=2611494)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 1024K (64 bytes/line)
><6>CPU 1/0x1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>mce: CPU supports 5 MCE banks
><6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
><6>CPU1: Dual Core AMD Opteron(tm) Processor 285 stepping 02
><6>Booting processor 2 APIC 0x2 ip 0x6000
><6>Initializing CPU#2
><6>Calibrating delay using timer specific routine.. 5222.98 BogoMIPS (lpj=2611494)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 1024K (64 bytes/line)
><6>CPU 2/0x2 -> Node 0
><6>CPU: Physical Processor ID: 1
><6>CPU: Processor Core ID: 0
><6>mce: CPU supports 5 MCE banks
><6>x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
><6>CPU2: Dual Core AMD Opteron(tm) Processor 285 stepping 02
><6>Booting processor 3 APIC 0x3 ip 0x6000
><6>Initializing CPU#3
><6>Calibrating delay using timer specific routine.. 5222.98 BogoMIPS (lpj=2611494)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 1024K (64 bytes/line)
><6>CPU 3/0x3 -> Node 0
><6>CPU: Physical Processor ID: 1
><6>CPU: Processor Core ID: 1
><6>mce: CPU supports 5 MCE banks
><6>x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
><6>CPU3: Dual Core AMD Opteron(tm) Processor 285 stepping 02
><6>Brought up 4 CPUs
><6>Total of 4 processors activated (20891.99 BogoMIPS).
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=56 bytes
><7>sizeof(inode)=584 bytes
><7>sizeof(dentry)=192 bytes
><7>sizeof(ext3inode)=776 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=6008 bytes
><7>CPU0 attaching sched-domain:
><7> domain 0: span 0-1 level MC
><7>  groups: 0 1
><7>  domain 1: span 0-3 level CPU
><7>   groups: 0-1 2-3
><7>CPU1 attaching sched-domain:
><7> domain 0: span 0-1 level MC
><7>  groups: 1 0
><7>  domain 1: span 0-3 level CPU
><7>   groups: 0-1 2-3
><7>CPU2 attaching sched-domain:
><7> domain 0: span 2-3 level MC
><7>  groups: 2 3
><7>  domain 1: span 0-3 level CPU
><7>   groups: 2-3 0-1
><7>CPU3 attaching sched-domain:
><7> domain 0: span 2-3 level MC
><7>  groups: 3 2
><7>  domain 1: span 0-3 level CPU
><7>   groups: 2-3 0-1
><6>Booting paravirtualized kernel on bare hardware
><6>regulator: core version 0.5
><4>Time:  0:08:25  Date: 01/14/10
><6>NET: Registered protocol family 16
><7>node 0 link 0: io port [1000, 1fff]
><6>TOM: 00000000c0000000 aka 3072M
><7>node 0 link 0: mmio [c8000000, d7ffffff]
><7>node 0 link 0: mmio [c8000000, c800ffff]
><7>node 0 link 2: mmio [d8000000, d83fffff]
><7>node 1 link 0: mmio [d8400000, d87fffff]
><7>node 0 link 0: mmio [a0000, bffff]
><7>node 0 link 0: mmio [e0000000, e7ffffff]
><7>node 1 link 0: mmio [e8000000, efffffff]
><6>TOM2: 0000000140000000 aka 5120M
><7>bus: [00,0f] on node 0 link 0
><7>bus: 00 index 0 io port: [0, ffff]
><7>bus: 00 index 1 mmio: [c0000000, d7ffffff]
><7>bus: 00 index 2 mmio: [a0000, bffff]
><7>bus: 00 index 3 mmio: [d8800000, e7ffffff]
><7>bus: 00 index 4 mmio: [f0000000, ffffffff]
><7>bus: 00 index 5 mmio: [140000000, fcffffffff]
><7>bus: [10,7f] on node 0 link 2
><7>bus: 10 index 0 mmio: [d8000000, d83fffff]
><7>bus: [80,ff] on node 1 link 0
><7>bus: 80 index 0 mmio: [d8400000, d87fffff]
><7>bus: 80 index 1 mmio: [e8000000, efffffff]
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1 for base access
><4>bio: create slab <bio-0> at 0
><7>ACPI: EC: Look up EC in DSDT
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: No dock devices found.
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>pci 0000:00:01.0: reg 10 io port: [0x8c00-0x8fff]
><6>HPET not enabled in BIOS. You might try hpet=force boot option
><7>pci 0000:00:01.1: reg 10 io port: [0x00-0x1f]
><7>pci 0000:00:01.1: reg 20 io port: [0xa000-0xa03f]
><7>pci 0000:00:01.1: reg 24 io port: [0xa040-0xa07f]
><6>pci 0000:00:01.1: PME# supported from D3hot D3cold
><6>pci 0000:00:01.1: PME# disabled
><7>pci 0000:00:02.0: reg 10 32bit mmio: [0xc8000000-0xc8000fff]
><7>pci 0000:00:02.0: supports D1 D2
><6>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.0: PME# disabled
><7>pci 0000:00:02.1: reg 10 32bit mmio: [0xc8001000-0xc80010ff]
><7>pci 0000:00:02.1: supports D1 D2
><6>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:02.1: PME# disabled
><7>pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff]
><7>pci 0000:00:04.0: reg 14 io port: [0x1400-0x14ff]
><7>pci 0000:00:04.0: reg 18 32bit mmio: [0xc8002000-0xc8002fff]
><7>pci 0000:00:04.0: supports D1 D2
><7>pci 0000:00:06.0: reg 20 io port: [0x1c00-0x1c0f]
><7>pci 0000:00:07.0: reg 10 io port: [0x1c40-0x1c47]
><7>pci 0000:00:07.0: reg 14 io port: [0x1c34-0x1c37]
><7>pci 0000:00:07.0: reg 18 io port: [0x1c38-0x1c3f]
><7>pci 0000:00:07.0: reg 1c io port: [0x1c30-0x1c33]
><7>pci 0000:00:07.0: reg 20 io port: [0x1c10-0x1c1f]
><7>pci 0000:00:07.0: reg 24 32bit mmio: [0xc8003000-0xc8003fff]
><7>pci 0000:00:08.0: reg 10 io port: [0x1c58-0x1c5f]
><7>pci 0000:00:08.0: reg 14 io port: [0x1c4c-0x1c4f]
><7>pci 0000:00:08.0: reg 18 io port: [0x1c50-0x1c57]
><7>pci 0000:00:08.0: reg 1c io port: [0x1c48-0x1c4b]
><7>pci 0000:00:08.0: reg 20 io port: [0x1c20-0x1c2f]
><7>pci 0000:00:08.0: reg 24 32bit mmio: [0xc8004000-0xc8004fff]
><7>pci 0000:00:0a.0: reg 10 32bit mmio: [0xc8005000-0xc8005fff]
><7>pci 0000:00:0a.0: reg 14 io port: [0x1c60-0x1c67]
><7>pci 0000:00:0a.0: supports D1 D2
><6>pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:0a.0: PME# disabled
><6>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:00:0e.0: PME# disabled
><7>PCI: peer root bus 00 res updated from pci conf
><7>pci 0000:01:05.0: reg 10 32bit mmio: [0xc8104000-0xc81047ff]
><7>pci 0000:01:05.0: reg 14 32bit mmio: [0xc8100000-0xc8103fff]
><7>pci 0000:01:05.0: supports D1 D2
><6>pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
><6>pci 0000:01:05.0: PME# disabled
><6>pci 0000:00:09.0: transparent bridge
><7>pci 0000:00:09.0: bridge 32bit mmio: [0xc8100000-0xc81fffff]
><7>pci 0000:02:00.0: reg 10 32bit mmio: [0xcc000000-0xcfffffff]
><7>pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xd7ffffff]
><7>pci 0000:02:00.0: reg 1c 64bit mmio: [0xc9000000-0xc9ffffff]
><7>pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
><6>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
><7>pci 0000:00:0e.0: bridge 32bit mmio: [0xc9000000-0xcfffffff]
><7>pci 0000:00:0e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
><6>ACPI: PCI Root Bridge [PCI2] (0000:10)
><7>pci 0000:10:0a.1: reg 10 64bit mmio: [0xd8000000-0xd8000fff]
><7>pci 0000:10:0b.1: reg 10 64bit mmio: [0xd8001000-0xd8001fff]
><7>PCI: peer root bus 10 res updated from pci conf
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PA._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.G0PB._PRT]
><6>ACPI: PCI Root Bridge [PCI1] (0000:80)
><7>pci 0000:80:01.0: reg 14 32bit mmio: [0xd8400000-0xd8400fff]
><6>pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
><6>pci 0000:80:0e.0: PME# disabled
><7>PCI: peer root bus 80 res updated from pci conf
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR0._PRT]
><6>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0
><6>ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0
><6>ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
><6>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
><6>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK1] (IRQs 48 49 50 51) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK2] (IRQs 48 49 50 51) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK3] (IRQs 48 49 50 51) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK4] (IRQs 48 49 50 51) *0, disabled.
><6>ACPI: PCI Interrupt Link [LNK5] (IRQs 48 49 50 51) *0, disabled.
><6>ACPI: PCI Interrupt Link [LUS0] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LUS2] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LMAC] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LACI] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LMCI] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LPID] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LTID] (IRQs 52 53 54 55) *0, disabled.
><6>ACPI: PCI Interrupt Link [LSI1] (IRQs 52 53 54 55) *0, disabled.
><6>vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
><6>vgaarb: loaded
><5>SCSI subsystem initialized
><7>libata version 3.00 loaded.
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><7>PCI: pci_cache_line_size set to 64 bytes
><4>Expanded resource reserved due to conflict with PCI Bus #00
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI-DMA: Disabling AGP.
><6>PCI-DMA: aperture base @ 20000000 size 65536 KB
><6>PCI-DMA: using GART IOMMU.
><6>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
><6>pnp: PnP ACPI init
><6>ACPI: bus type pnp registered
><4>pnp 00:03: io resource (0x10-0x1f) overlaps 0000:00:01.1 BAR 0 (0x0-0x1f), disabling
><6>pnp: PnP ACPI: found 14 devices
><6>ACPI: ACPI bus type pnp unregistered
><6>system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
><6>system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
><6>system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
><6>system 00:00: iomem range 0xfefff000-0xfeffffff has been reserved
><6>system 00:02: ioport range 0x8000-0x807f has been reserved
><6>system 00:02: ioport range 0x8080-0x80ff has been reserved
><6>system 00:02: ioport range 0x8400-0x847f has been reserved
><6>system 00:02: ioport range 0x8480-0x84ff has been reserved
><6>system 00:02: ioport range 0x8800-0x887f has been reserved
><6>system 00:02: ioport range 0x8880-0x88ff has been reserved
><6>system 00:02: ioport range 0xa000-0xa03f has been reserved
><6>system 00:02: ioport range 0xa040-0xa07f has been reserved
><6>system 00:03: ioport range 0x4d0-0x4d1 has been reserved
><6>system 00:03: ioport range 0x400-0x45e has been reserved
><6>system 00:03: ioport range 0x9000-0x907f has been reserved
><6>system 00:03: ioport range 0x9080-0x90ff has been reserved
><6>system 00:03: ioport range 0x9200-0x927f has been reserved
><6>system 00:03: ioport range 0x9280-0x92ff has been reserved
><6>system 00:03: ioport range 0x9400-0x947f has been reserved
><6>system 00:03: ioport range 0x9480-0x94ff has been reserved
><6>pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
><6>pci 0000:00:09.0:   IO window: disabled
><7>Switched to high resolution mode on CPU 0
><6>pci 0000:00:09.0:   MEM window: 0xc8100000-0xc81fffff
><6>pci 0000:00:09.0:   PREFETCH window: disabled
><6>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
><7>Switched to high resolution mode on CPU 1
><7>Switched to high resolution mode on CPU 3
><7>Switched to high resolution mode on CPU 2
><6>pci 0000:00:0e.0:   IO window: disabled
><6>pci 0000:00:0e.0:   MEM window: 0xc9000000-0xcfffffff
><6>pci 0000:00:0e.0:   PREFETCH window: 0x000000d0000000-0x000000d7ffffff
><7>pci 0000:00:09.0: setting latency timer to 64
><7>pci 0000:00:0e.0: setting latency timer to 64
><6>pci 0000:10:0a.0: PCI bridge, secondary bus 0000:11
><6>pci 0000:10:0a.0:   IO window: disabled
><6>pci 0000:10:0a.0:   MEM window: disabled
><6>pci 0000:10:0a.0:   PREFETCH window: disabled
><6>pci 0000:10:0b.0: PCI bridge, secondary bus 0000:12
><6>pci 0000:10:0b.0:   IO window: disabled
><6>pci 0000:10:0b.0:   MEM window: disabled
><6>pci 0000:10:0b.0:   PREFETCH window: disabled
><6>pci 0000:80:0e.0: PCI bridge, secondary bus 0000:81
><6>pci 0000:80:0e.0:   IO window: disabled
><6>pci 0000:80:0e.0:   MEM window: disabled
><6>pci 0000:80:0e.0:   PREFETCH window: disabled
><7>pci 0000:80:0e.0: setting latency timer to 64
><7>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
><7>pci_bus 0000:00: resource 1 mem: [0xc0000000-0xd7ffffff]
><7>pci_bus 0000:00: resource 2 mem: [0x0a0000-0x0bffff]
><7>pci_bus 0000:00: resource 3 mem: [0xd8800000-0xe7ffffff]
><7>pci_bus 0000:00: resource 4 mem: [0xf0000000-0xffffffff]
><7>pci_bus 0000:00: resource 5 mem: [0x140000000-0xfcffffffff]
><7>pci_bus 0000:01: resource 1 mem: [0xc8100000-0xc81fffff]
><7>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
><7>pci_bus 0000:01: resource 4 mem: [0xc0000000-0xd7ffffff]
><7>pci_bus 0000:01: resource 5 mem: [0x0a0000-0x0bffff]
><7>pci_bus 0000:01: resource 6 mem: [0xd8800000-0xe7ffffff]
><7>pci_bus 0000:01: resource 7 mem: [0xf0000000-0xffffffff]
><7>pci_bus 0000:01: resource 8 mem: [0x140000000-0xfcffffffff]
><7>pci_bus 0000:02: resource 1 mem: [0xc9000000-0xcfffffff]
><7>pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd7ffffff]
><7>pci_bus 0000:10: resource 0 mem: [0xd8000000-0xd83fffff]
><7>pci_bus 0000:10: resource 1 mem: [0x000000-0xffffffffffffffff]
><7>pci_bus 0000:80: resource 0 mem: [0xd8400000-0xd87fffff]
><7>pci_bus 0000:80: resource 1 mem: [0xe8000000-0xefffffff]
><6>NET: Registered protocol family 2
><6>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><6>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
><6>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Trying to unpack rootfs image as initramfs...
><6>Freeing initrd memory: 22989k freed
><6>Simple Boot Flag at 0x36 set to 0x1
><6>audit: initializing netlink socket (disabled)
><5>type=2000 audit(1263427704.751:1): initialized
><6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
><5>VFS: Disk quotas dquot_6.5.2
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>msgmni has been set to 7928
><7>SELinux:  Registering netfilter hooks
><6>alg: No test for stdrng (krng)
><6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>pci 0000:00:00.0: Found enabled HT MSI Mapping
><6>pci 0000:00:0e.0: Found disabled HT MSI Mapping
><6>pci 0000:00:00.0: Found enabled HT MSI Mapping
><7>pci 0000:02:00.0: Boot video device
><4>pci 0000:10:0a.0: MSI quirk detected; subordinate MSI disabled
><6>disabled boot interrupts on PCI device 0x1022:0x7450
><6>pci 0000:10:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
><4>pci 0000:10:0b.0: MSI quirk detected; subordinate MSI disabled
><6>disabled boot interrupts on PCI device 0x1022:0x7450
><6>pci 0000:10:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC
><6>pci 0000:80:00.0: Found enabled HT MSI Mapping
><6>pci 0000:80:0e.0: Found disabled HT MSI Mapping
><6>pci 0000:80:00.0: Found enabled HT MSI Mapping
><7>  alloc irq_desc for 56 on node 0
><7>  alloc kstat_irqs on node 0
><7>pcieport-driver 0000:00:0e.0: irq 56 for MSI/MSI-X
><7>pcieport-driver 0000:00:0e.0: setting latency timer to 64
><7>  alloc irq_desc for 57 on node -1
><7>  alloc kstat_irqs on node -1
><7>pcieport-driver 0000:80:0e.0: irq 57 for MSI/MSI-X
><7>pcieport-driver 0000:80:0e.0: setting latency timer to 64
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
><6>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
><4>acpiphp_glue: can't get bus number, assuming 0
><6>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
><6>ACPI: Power Button [PWRF]
><6>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
><6>ACPI: Power Button [PWRB]
><6>processor LNXCPU:00: registered as cooling_device0
><6>processor LNXCPU:01: registered as cooling_device1
><6>processor LNXCPU:02: registered as cooling_device2
><6>processor LNXCPU:03: registered as cooling_device3
><6>Non-volatile memory driver v1.3
><6>Linux agpgart interface v0.103
><6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>brd: module loaded
><6>loop: module loaded
><6>input: Macintosh mouse button emulation as /devices/virtual/input/input2
><6>Fixed MDIO Bus: probed
><6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
><4>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
><7>  alloc irq_desc for 23 on node 0
><7>  alloc kstat_irqs on node 0
><6>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, high) -> IRQ 23
><7>ehci_hcd 0000:00:02.1: setting latency timer to 64
><6>ehci_hcd 0000:00:02.1: EHCI Host Controller
><6>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:02.1: debug port 1
><7>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
><6>ehci_hcd 0000:00:02.1: irq 23, io mem 0xc8001000
><6>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
><6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
><6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb1: Product: EHCI Host Controller
><6>usb usb1: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ehci_hcd
><6>usb usb1: SerialNumber: 0000:00:02.1
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
><7>  alloc irq_desc for 22 on node 0
><7>  alloc kstat_irqs on node 0
><6>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
><7>ohci_hcd 0000:00:02.0: setting latency timer to 64
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:02.0: irq 22, io mem 0xc8000000
><6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
><6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
><6>usb usb2: Product: OHCI Host Controller
><6>usb usb2: Manufacturer: Linux 2.6.31.5-127.fc12.x86_64 ohci_hcd
><6>usb usb2: SerialNumber: 0000:00:02.0
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 10 ports detected
><6>uhci_hcd: USB Universal Host Controller Interface driver
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>rtc_cmos 00:06: RTC can wake from S4
><6>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
><6>rtc0: alarms up to one year, y3k, 114 bytes nvram
><6>device-mapper: uevent: version 1.0.3
><6>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
><6>cpuidle: using governor ladder
><6>cpuidle: using governor menu
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>usbhid: v2.6:USB HID core driver
><4>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
><4>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
><4>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
><4>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
><6>ip_tables: (C) 2000-2006 Netfilter Core Team
><6>TCP cubic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 17
><7>PM: Resume from disk failed.
><4>registered taskstats version 1
><6>No TPM chip found, activating TPM-bypass!
><4>  Magic number: 10:81:102
><6>rtc_cmos 00:06: setting system clock to 2010-01-14 00:08:26 UTC (1263427706)
><6>Initalizing network drop monitor service
><6>Freeing unused kernel memory: 1324k freed
><6>Write protecting the kernel read-only data: 6344k
><6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
><6>usb 1-5: new high speed USB device using ehci_hcd and address 2
><6>usb 1-5: New USB device found, idVendor=0781, idProduct=7112
><6>usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
><6>usb 1-5: Product: Cruzer Micro
><6>usb 1-5: Manufacturer: SanDisk Corp.
><6>usb 1-5: SerialNumber: 0001377317
><6>usb 1-5: configuration #1 chosen from 1 choice
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><6>usb 1-6: new high speed USB device using ehci_hcd and address 3
><6>usb 1-6: New USB device found, idVendor=0a48, idProduct=3232
><6>usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=4
><6>usb 1-6: Product: MediaBay 8 in 4 BayDrive
><6>usb 1-6: Manufacturer: IOI 
><6>usb 1-6: SerialNumber: 02301
><6>usb 1-6: configuration #1 chosen from 1 choice
><6>scsi1 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 3
><7>usb-storage: waiting for device to settle before scanning
><6>input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4
><6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
><6>Loading iSCSI transport class v2.0-870.
><5>iscsi: registered transport (tcp)
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
><6>input: PC Speaker as /devices/platform/pcspkr/input/input5
><6>No iBFT detected.
><7>sata_nv 0000:00:07.0: version 3.5
><4>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
><7>  alloc irq_desc for 21 on node 0
><7>  alloc kstat_irqs on node 0
><6>sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 21 (level, high) -> IRQ 21
><7>sata_nv 0000:00:07.0: setting latency timer to 64
><6>scsi2 : sata_nv
><6>scsi3 : sata_nv
><6>ata1: SATA max UDMA/133 cmd 0x1c40 ctl 0x1c34 bmdma 0x1c10 irq 21
><6>ata2: SATA max UDMA/133 cmd 0x1c38 ctl 0x1c30 bmdma 0x1c18 irq 21
><6>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
><4>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
><7>  alloc irq_desc for 20 on node 0
><7>  alloc kstat_irqs on node 0
><6>forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
><7>forcedeth 0000:00:0a.0: setting latency timer to 64
><7>nv_probe: set workaround bit for reversed mac addr
><27>Jan 14 00:08:31 udevd-work[134]: device node '/dev/rtc' already exists, link to '/dev/rtc0' will not overwrite it
>
><6>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
><6>ata1.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
><6>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata1.00: configured for UDMA/133
><5>scsi 2:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
><5>sd 2:0:0:0: Attached scsi generic sg0 type 0
><5>sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
><5>sd 2:0:0:0: [sda] Write Protect is off
><7>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
><5>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4 < sda5 >
><5>sd 2:0:0:0: [sda] Attached SCSI disk
><6>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
><6>ata2.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
><6>ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata2.00: configured for UDMA/133
><5>scsi 3:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
><5>sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
><5>sd 3:0:0:0: Attached scsi generic sg1 type 0
><5>sd 3:0:0:0: [sdb] Write Protect is off
><7>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
><5>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdb: sdb1 sdb2 sdb3
><5>sd 3:0:0:0: [sdb] Attached SCSI disk
><7>usb-storage: device scan complete
><5>scsi 0:0:0:0: Direct-Access     SanDisk  Cruzer Micro     2033 PQ: 0 ANSI: 0
><5>sd 0:0:0:0: Attached scsi generic sg2 type 0
><5>sd 0:0:0:0: [sdc] 256000 512-byte logical blocks: (131 MB/125 MiB)
><6>[drm] Initialized drm 1.1.0 20060810
><5>sd 0:0:0:0: [sdc] Write Protect is off
><7>sd 0:0:0:0: [sdc] Mode Sense: 00 00 00 00
><3>sd 0:0:0:0: [sdc] Assuming drive cache: write through
><4>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 19
><7>  alloc irq_desc for 19 on node 0
><7>  alloc kstat_irqs on node 0
><6>firewire_ohci 0000:01:05.0: PCI INT A -> Link[LNK4] -> GSI 19 (level, high) -> IRQ 19
><3>sd 0:0:0:0: [sdc] Assuming drive cache: write through
><6> sdc: sdc1
><3>sd 0:0:0:0: [sdc] Assuming drive cache: write through
><5>sd 0:0:0:0: [sdc] Attached SCSI removable disk
><4>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 18
><7>  alloc irq_desc for 18 on node 0
><7>  alloc kstat_irqs on node 0
><6>nouveau 0000:02:00.0: PCI INT A -> Link[LNK3] -> GSI 18 (level, high) -> IRQ 18
><7>nouveau 0000:02:00.0: setting latency timer to 64
><3>[drm] nouveau 0000:02:00.0: failed to evaluate _DSM: 5
><6>[drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x043000a2)
><6>[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM
><5>[drm] nouveau 0000:02:00.0: ... BIOS signature not found
><6>[drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
><6>[drm] nouveau 0000:02:00.0: ... appears to be valid
><6>[drm] nouveau 0000:02:00.0: BIT BIOS found
><6>[drm] nouveau 0000:02:00.0: Bios version 05.43.02.46
><6>[drm] nouveau 0000:02:00.0: Found Display Configuration Block version 3.0
><5>[drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028
><5>[drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04011312 00000000
><5>[drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
><5>[drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020223f1 0004c080
><6>[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xEF72
><6>[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xF31E
><5>firewire_ohci: Added fw-ohci device 0000:01:05.0, OHCI version 1.10
><6>[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xF847
><6>[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xF9CF
><6>[drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xFA93
><6>forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:e0:81:57:15:16
><6>forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
><7>pata_amd 0000:00:06.0: version 0.4.1
><7>pata_amd 0000:00:06.0: setting latency timer to 64
><6>[TTM] Zone  kernel: Available graphics memory: 2030284 kiB.
><6>scsi4 : pata_amd
><6>[drm] nouveau 0000:02:00.0: 128 MiB VRAM
><6>scsi5 : pata_amd
><6>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14
><6>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15
><6>[drm] nouveau 0000:02:00.0: 64 MiB GART (aperture)
><4>ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 23
><6>sata_nv 0000:00:08.0: PCI INT A -> Link[LSI1] -> GSI 23 (level, high) -> IRQ 23
><7>sata_nv 0000:00:08.0: setting latency timer to 64
><6>[drm] nouveau 0000:02:00.0: Allocating FIFO number 0
><6>[drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0
><6>[drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0
><6>[drm] nouveau 0000:02:00.0: Enable TV-Out with tv module option
><6>[drm] nouveau 0000:02:00.0: Detected a VGA connector
><6>[drm] nouveau 0000:02:00.0: Detected a DVI-I connector
><6>[drm] nouveau 0000:02:00.0: Saving VGA fonts
><7>usb-storage: device scan complete
><6>scsi6 : sata_nv
><6>scsi7 : sata_nv
><5>scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
><6>ata5: SATA max UDMA/133 cmd 0x1c58 ctl 0x1c4c bmdma 0x1c20 irq 23
><6>ata6: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c48 bmdma 0x1c28 irq 23
><5>scsi 1:0:0:1: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
><5>scsi 1:0:0:2: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
><5>scsi 1:0:0:3: Direct-Access     Generic  STORAGE DEVICE   0128 PQ: 0 ANSI: 0
><5>sd 1:0:0:0: Attached scsi generic sg3 type 0
><5>sd 1:0:0:1: Attached scsi generic sg4 type 0
><5>sd 1:0:0:2: Attached scsi generic sg5 type 0
><5>sd 1:0:0:3: Attached scsi generic sg6 type 0
><5>sd 1:0:0:1: [sde] Attached SCSI removable disk
><5>sd 1:0:0:0: [sdd] Attached SCSI removable disk
><5>sd 1:0:0:2: [sdf] Attached SCSI removable disk
><6>[drm] nouveau 0000:02:00.0: Load detected on output A
><5>sd 1:0:0:3: [sdg] Attached SCSI removable disk
><6>[drm] nouveau 0000:02:00.0: allocated 800x600 fb: 0x49000, bo ffff8801359fa200
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0)
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 2)
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on CRTC 0
><6>[drm] nouveau 0000:02:00.0: vpll: n 53 m 9 log2p 2
><6>[drm] DAC-7: set mode 800x600 12
><6>[drm] nouveau 0000:02:00.0: nv04_dac_mode_set called for encoder 0
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on CRTC 0
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 0)
><6>[drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output A
><6>[drm] nouveau 0000:02:00.0: Setting dpms mode 3 on CRTC 1
><6>ata3.00: ATAPI: HL-DT-ST DVDRAM GMA-4020B, A109, max UDMA/66
><7>ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13)
><4>Console: switching to colour frame buffer device 100x37
><6>fb0: nouveaufb frame buffer device
><6>registered panic notifier
><6>[drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
><6>ata3.00: configured for UDMA/66
><5>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GMA-4020B A109 PQ: 0 ANSI: 5
><6>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
><4>sr0: scsi3-mmc drive: 26x/56x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 4:0:0:0: Attached scsi CD-ROM sr0
><5>sr 4:0:0:0: Attached scsi generic sg7 type 5
><6>ata5.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
><6>ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata5.00: configured for UDMA/133
><5>scsi 6:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
><5>sd 6:0:0:0: [sdh] 488397168 512-byte logical blocks: (250 GB/232 GiB)
><5>sd 6:0:0:0: Attached scsi generic sg8 type 0
><5>sd 6:0:0:0: [sdh] Write Protect is off
><7>sd 6:0:0:0: [sdh] Mode Sense: 00 3a 00 00
><5>sd 6:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdh: sdh1
><5>sd 6:0:0:0: [sdh] Attached SCSI disk
><5>firewire_core: created device fw0: GUID 00e081000023d2a1, S400
><6>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
><6>ata6.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
><6>ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
><6>ata6.00: configured for UDMA/133
><5>scsi 7:0:0:0: Direct-Access     ATA      ST3250410AS      3.AA PQ: 0 ANSI: 5
><5>sd 7:0:0:0: [sdi] 488397168 512-byte logical blocks: (250 GB/232 GiB)
><5>sd 7:0:0:0: Attached scsi generic sg9 type 0
><5>sd 7:0:0:0: [sdi] Write Protect is off
><7>sd 7:0:0:0: [sdi] Mode Sense: 00 3a 00 00
><5>sd 7:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdi: sdi1
><5>sd 7:0:0:0: [sdi] Attached SCSI disk
><29>Jan 14 00:08:32 NetworkManager: <info>  starting...
>
><29>Jan 14 00:08:32 NetworkManager: <info>  Trying to start the modem-manager...
>
><28>Jan 14 00:08:32 NetworkManager:    ifcfg-rh: Could not get hostname: failed to read /etc/sysconfig/network
><29>Jan 14 00:08:32 NetworkManager: Loaded plugin ifcfg-rh: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
><29>Jan 14 00:08:32 NetworkManager: <info>  Wireless now enabled by radio killswitch
>
><29>Jan 14 00:08:32 NetworkManager:    ifcfg-rh: parsing /etc/sysconfig/network-scripts/ifcfg-eth0 ... 
><29>Jan 14 00:08:32 NetworkManager:    ifcfg-rh:     read connection 'System eth0'
><29>Jan 14 00:08:32 NetworkManager:    ifcfg-rh: Ignoring connection 'System eth0' and its device because NM_CONTROLLED was false.
><29>Jan 14 00:08:32 NetworkManager: <info>  (eth0): carrier is OFF
>
><29>Jan 14 00:08:32 NetworkManager: <info>  (eth0): new Ethernet device (driver: 'forcedeth')
>
><29>Jan 14 00:08:32 NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
>
><28>Jan 14 00:08:32 NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
>
><29>Jan 14 00:08:32 NetworkManager: <info>  Trying to start the supplicant...
>
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><7>ISO 9660 Extensions: RRIP_1991A
><29>Jan 14 00:08:51 dbus-daemon: Reloaded configuration
><29>Jan 14 00:08:51 dbus-daemon: Reloaded configuration
><7>SELinux: 8192 avtab hash slots, 144734 rules.
><7>SELinux: 8192 avtab hash slots, 144734 rules.
><7>SELinux:  8 users, 12 roles, 2941 types, 136 bools, 1 sens, 1024 cats
><7>SELinux:  75 classes, 144734 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>type=1403 audit(1263427731.820:2): policy loaded auid=4294967295 ses=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>xor: automatically using best checksumming function: generic_sse
><6>   generic_sse:  8508.000 MB/sec
><6>xor: using function: generic_sse (8508.000 MB/sec)
><6>async_tx: api initialized (async)
><4>raid6: int64x1   2269 MB/s
><4>raid6: int64x2   2691 MB/s
><4>raid6: int64x4   1980 MB/s
><4>raid6: int64x8   1484 MB/s
><4>raid6: sse2x1    2605 MB/s
><4>raid6: sse2x2    3507 MB/s
><4>raid6: sse2x4    3968 MB/s
><4>raid6: using algorithm sse2x4 (3968 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><6>md: linear personality registered for level -1
><6>device-mapper: multipath: version 1.1.0 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><3>device-mapper: table: 253:0: raid45: unknown target type
><4>device-mapper: ioctl: error adding target to table
><7>SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
><6>usb 1-5: USB disconnect, address 2
><6>usb 1-5: new high speed USB device using ehci_hcd and address 4
><6>usb 1-5: New USB device found, idVendor=0781, idProduct=7112
><6>usb 1-5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
><6>usb 1-5: Product: Cruzer Micro
><6>usb 1-5: Manufacturer: SanDisk Corp.
><6>usb 1-5: SerialNumber: 0001377317
><6>usb 1-5: configuration #1 chosen from 1 choice
><6>scsi8 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 4
><7>usb-storage: waiting for device to settle before scanning
><7>usb-storage: device scan complete
><5>scsi 8:0:0:0: Direct-Access     SanDisk  Cruzer Micro     2033 PQ: 0 ANSI: 0
><5>sd 8:0:0:0: Attached scsi generic sg2 type 0
><5>sd 8:0:0:0: [sdc] 256000 512-byte logical blocks: (131 MB/125 MiB)
><5>sd 8:0:0:0: [sdc] Write Protect is off
><7>sd 8:0:0:0: [sdc] Mode Sense: 00 00 00 00
><3>sd 8:0:0:0: [sdc] Assuming drive cache: write through
><3>sd 8:0:0:0: [sdc] Assuming drive cache: write through
><6> sdc: sdc1
><3>sd 8:0:0:0: [sdc] Assuming drive cache: write through
><5>sd 8:0:0:0: [sdc] Attached SCSI removable disk
><7>SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
><29>Jan 14 02:48:42 NetworkManager: <info>  (eth0): carrier now ON (device state 1)
>

Actions: View

Attachments on bug 554602: 383598 | 383599 | 383600 | 383601 | 384493 | 384494