Attachment 398009 Details for Bug 557317 – dmesg

dmesg

dmesg.log (text/plain), 40.86 KB, created by Caolan McNamara on 2010-03-05 09:48:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Caolan McNamara

Created: 2010-03-05 09:48:58 UTC

Size: 40.86 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.33-1.fc13.i686 (mockbuild@xb-01.phx2.fedoraproject.org) (gcc version 4.4.3 20100211 (Red Hat 4.4.3-6) (GCC) ) #1 SMP Wed Feb 24 20:11:36 UTC 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f65c800 (usable)
> BIOS-e820: 000000007f65c800 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI 2.4 present.
>last_pfn = 0x7f65c max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F800000 mask FFF800000 uncachable
>  2 base 07F700000 mask FFFF00000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2040MB, range: 8MB, type UC
>reg 2, base: 2039MB, range: 1MB, type UC
>total RAM covered: 2039M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 3  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2039MB, range: 1MB, type UC
>reg 2, base: 2040MB, range: 8MB, type UC
>initial memory mapped : 0 - 01800000
>init_memory_mapping: 0000000000000000-00000000373fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037000000 page 2M
> 0037000000 - 00373fe000 page 4k
>kernel direct mapping tables up to 373fe000 @ 7000-d000
>RAMDISK: 3742c000 - 37fef947
>Allocated new RAMDISK: 0129c000 - 01e5f947
>Move RAMDISK from 000000003742c000 - 0000000037fef946 to 0129c000 - 01e5f946
>ACPI: RSDP 000fc0e0 00014 (v00 DELL  )
>ACPI: RSDT 7f65ce0e 00040 (v01 DELL    M07     27D8071C ASL  00000061)
>ACPI: FACP 7f65dc00 00074 (v01 DELL    M07     27D8071C ASL  00000061)
>ACPI: DSDT 7f65e800 04BBE (v01 INT430 SYSFexxx 00001001 INTL 20050624)
>ACPI: FACS 7f66d000 00040
>ACPI: HPET 7f65e300 00038 (v01 DELL    M07     00000001 ASL  00000061)
>ACPI: APIC 7f65e400 00068 (v01 DELL    M07     27D8071C ASL  00000047)
>ACPI: ASF! 7f65e000 0007E (v32 DELL    M07     27D8071C ASL  00000061)
>ACPI: MCFG 7f65e3c0 0003E (v16 DELL    M07     27D8071C ASL  00000061)
>ACPI: TCPA 7f65e700 00032 (v01 DELL    M07     27D8071C ASL  00000061)
>ACPI: SSDT 7f65ce91 004DC (v01  PmRef    CpuPm 00003000 INTL 20050624)
>ACPI: Local APIC address 0xfee00000
>1154MB HIGHMEM available.
>883MB LOWMEM available.
>  mapped low ram: 0 - 373fe000
>  low ram: 0 - 373fe000
>  node 0 low ram: 00000000 - 373fe000
>  node 0 bootmap 0000a000 - 00010e80
>(10 early reservations) ==> bootmem [0000000000 - 00373fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000400000 - 000129452c]    TEXT DATA BSS ==> [0000400000 - 000129452c]
>  #3 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
>  #4 [0001295000 - 000129b180]              BRK ==> [0001295000 - 000129b180]
>  #5 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
>  #6 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
>  #7 [0000007000 - 000000a000]          PGTABLE ==> [0000007000 - 000000a000]
>  #8 [000129c000 - 0001e5f947]      NEW RAMDISK ==> [000129c000 - 0001e5f947]
>  #9 [000000a000 - 0000011000]          BOOTMAP ==> [000000a000 - 0000011000]
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000373fe
>  HighMem  0x000373fe -> 0x0007f65c
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f65c
>On node 0 totalpages: 521723
>free_area_init_node: node 0, pgdat c0a10840, node_mem_map c1e61000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1736 pages used for memmap
>  Normal zone: 220470 pages, LIFO batch:31
>  HighMem zone: 2309 pages used for memmap
>  HighMem zone: 293209 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Using ACPI for processor (LAPIC) configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 16
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 334 pages/cpu @c3000000 s1346136 r0 d21928 u2097152
>pcpu-alloc: s1346136 r0 d21928 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517646
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 pci=noacpi rhgb quiet SYSFONT=latarcyrheb-sun16 LANG=en_IE.UTF-8 KEYTABLE=uk
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>allocated 10436400 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000373fe:0007f65c)
>Memory: 2028664k/2087280k available (3808k kernel code, 57164k reserved, 2536k data, 1844k init, 1182072k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
>      .init : 0xc0a33000 - 0xc0c00000   (1844 kB)
>      .data : 0xc07b821c - 0xc0a32430   (2536 kB)
>      .text : 0xc0400000 - 0xc07b821c   (3808 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:  8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:          4096
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 3823 kB
> per task-struct memory footprint: 1920 bytes
>ODEBUG: 11 of 11 active objects replaced
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 1063.975 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2127.95 BogoMIPS (lpj=1063975)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20876 entries in 41 pages
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>CPU0: Intel(R) Core(TM)2 CPU         U7500  @ 1.06GHz stepping 02
>lockdep: fixing up alternatives.
>Booting Node   0, Processors  #1 Ok.
>Initializing CPU#1
>TSC synchronization [CPU#0 -> CPU#1]:
>Measured 2581160320 cycles TSC warp between CPUs, turning off TSC clock.
>Marking TSC unstable due to check_tsc_sync_source failed
>Brought up 2 CPUs
>Total of 2 processors activated (4255.87 BogoMIPS).
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=652 bytes
>sizeof(dentry)=164 bytes
>sizeof(ext3inode)=920 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=5488 bytes
>devtmpfs: initialized
>regulator: core version 0.5
>Time:  8:12:58  Date: 03/01/10
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
>PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 8C (20091214/tbutils-314)
>ACPI: SSDT 7f65ce4e 00043 (v01  LMPWR  DELLLOM 00001001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: ACPI Dock Station Driver: 1 docks/bays found
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>pci 0000:00:02.0: reg 10: [mem 0xeff00000-0xeff7ffff]
>pci 0000:00:02.0: reg 14: [io  0xeff8-0xefff]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xefec0000-0xefefffff]
>pci 0000:00:02.1: reg 10: [mem 0xeff80000-0xefffffff]
>pci 0000:00:1b.0: reg 10: [mem 0xefebc000-0xefebffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.2: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xbf80-0xbf9f]
>pci 0000:00:1d.1: reg 20: [io  0xbf60-0xbf7f]
>pci 0000:00:1d.2: reg 20: [io  0xbf40-0xbf5f]
>pci 0000:00:1d.3: reg 20: [io  0xbf20-0xbf3f]
>pci 0000:00:1d.7: reg 10: [mem 0xffa80000-0xffa803ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
>pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:1f.1: reg 20: [io  0xbfa0-0xbfaf]
>pci 0000:00:1f.3: reg 20: [io  0x10c0-0x10df]
>pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>pci 0000:0c:00.0: reg 10: [mem 0xefdff000-0xefdfffff]
>pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:0c:00.0: PME# disabled
>pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>pci 0000:00:1c.1:   bridge window [mem 0xefd00000-0xefdfffff]
>pci 0000:09:00.0: reg 10: [mem 0xefcf0000-0xefcfffff 64bit]
>pci 0000:09:00.0: PME# supported from D3hot D3cold
>pci 0000:09:00.0: PME# disabled
>pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.2: PCI bridge to [bus 09-09]
>pci 0000:00:1c.2:   bridge window [mem 0xefc00000-0xefcfffff]
>pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:02:01.0: supports D1 D2
>pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.0: PME# disabled
>pci 0000:02:01.1: reg 10: [mem 0xefbff800-0xefbfffff]
>pci 0000:02:01.1: supports D1 D2
>pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.1: PME# disabled
>pci 0000:02:01.2: reg 10: [mem 0xefbff700-0xefbff7ff]
>pci 0000:02:01.2: supports D1 D2
>pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:01.2: PME# disabled
>pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xefb00000-0xefbfffff]
>pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:27b9]
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>kstop/0 used greatest stack depth: 7288 bytes left
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:02: disabling [io  0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:02: disabling [io  0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:03: disabling [io  0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:03: disabling [io  0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:03: disabling [io  0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp 00:03: disabling [io  0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x1000-0x107f]
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
>system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0x7f65c7ff] could not be reserved
>system 00:00: [mem 0x7f65c800-0x7f6fffff] has been reserved
>system 00:00: [mem 0x7f700000-0x7f7fffff] has been reserved
>system 00:00: [mem 0x7f700000-0x7fefffff] could not be reserved
>system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
>system 00:00: [mem 0xfec00000-0xfec0ffff] has been reserved
>system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
>system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:00: [mem 0xfed45000-0xfed9ffff] has been reserved
>system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
>system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
>system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
>system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
>system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
>system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
>system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:02: [io  0x04d0-0x04d1] has been reserved
>system 00:03: [io  0xf400-0xf4fe] has been reserved
>system 00:03: [io  0x1080-0x10bf] has been reserved
>system 00:03: [io  0x10c0-0x10df] has been reserved
>system 00:03: [io  0x0809] has been reserved
>system 00:08: [io  0x0c80-0x0caf] has been reserved
>system 00:08: [io  0x0cc0-0x0cff] could not be reserved
>system 00:08: [io  0x0910-0x091f] has been reserved
>system 00:08: [io  0x0920-0x092f] has been reserved
>system 00:08: [io  0x0cbc-0x0cbf] has been reserved
>system 00:08: [io  0x0930-0x097f] has been reserved
>system 00:0b: [mem 0xfed00000-0xfed003ff] has been reserved
>system 00:0c: [io  0x0cb0-0x0cbb] has been reserved
>system 00:0c: [mem 0xfed40000-0xfed44fff] has been reserved
>pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:1c.0: BAR 14: assigned [mem 0x84000000-0x841fffff]
>pci 0000:00:1c.0: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.1: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:00:1c.2: BAR 15: assigned [mem 0x84600000-0x847fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
>pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
>pci 0000:00:1e.0: BAR 13: assigned [io  0x5000-0x5fff]
>pci 0000:00:1c.0: PCI bridge to [bus 0b-0b]
>pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff]
>pci 0000:00:1c.0:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 0c-0c]
>pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.1:   bridge window [mem 0xefd00000-0xefdfffff]
>pci 0000:00:1c.1:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
>pci 0000:00:1c.2: PCI bridge to [bus 09-09]
>pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.2:   bridge window [mem 0xefc00000-0xefcfffff]
>pci 0000:00:1c.2:   bridge window [mem 0x84600000-0x847fffff 64bit pref]
>pci 0000:02:01.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:01.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
>pci 0000:02:01.0: BAR 0: assigned [mem 0xefb00000-0xefb00fff]
>pci 0000:02:01.0: BAR 0: set to [mem 0xefb00000-0xefb00fff] (PCI address [0xefb00000-0xefb00fff]
>pci 0000:02:01.0: BAR 13: assigned [io  0x5000-0x50ff]
>pci 0000:02:01.0: BAR 14: assigned [io  0x5400-0x54ff]
>pci 0000:02:01.0: CardBus bridge to [bus 03-06]
>pci 0000:02:01.0:   bridge window [io  0x5000-0x50ff]
>pci 0000:02:01.0:   bridge window [io  0x5400-0x54ff]
>pci 0000:02:01.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:02:01.0:   bridge window [mem 0x88000000-0x8bffffff]
>pci 0000:00:1e.0: PCI bridge to [bus 02-03]
>pci 0000:00:1e.0:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1e.0:   bridge window [mem 0xefb00000-0xefbfffff]
>pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
>pci 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: can't find IRQ for PCI INT B; please try using pci=biosirq
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: can't find IRQ for PCI INT C; please try using pci=biosirq
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:02:01.0: enabling device (0000 -> 0003)
>PCI: setting IRQ 9 as level-triggered
>pci 0000:02:01.0: assigned PCI INT A -> IRQ 9
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
>pci_bus 0000:0b: resource 1 [mem 0x84000000-0x841fffff]
>pci_bus 0000:0b: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
>pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:0c: resource 1 [mem 0xefd00000-0xefdfffff]
>pci_bus 0000:0c: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
>pci_bus 0000:09: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:09: resource 1 [mem 0xefc00000-0xefcfffff]
>pci_bus 0000:09: resource 2 [mem 0x84600000-0x847fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:02: resource 1 [mem 0xefb00000-0xefbfffff]
>pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:02: resource 3 [io  0x0000-0xffff]
>pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
>pci_bus 0000:03: resource 0 [io  0x5000-0x50ff]
>pci_bus 0000:03: resource 1 [io  0x5400-0x54ff]
>pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
>pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 3, 49152 bytes)
>UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 12046k freed
>DMA-API: preallocated 32768 debug entries
>DMA-API: debugging enabled by kernel config
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1267431179.374:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1679
>SELinux:  Registering netfilter hooks
>cryptomgr_test used greatest stack depth: 6928 bytes left
>cryptomgr_test used greatest stack depth: 6852 bytes left
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: device [8086:27d0] has invalid IRQ; check vendor BIOS
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X
>pcieport 0000:00:1c.1: device [8086:27d2] has invalid IRQ; check vendor BIOS
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 17 for MSI/MSI-X
>pcieport 0000:00:1c.2: device [8086:27d4] has invalid IRQ; check vendor BIOS
>pcieport 0000:00:1c.2: setting latency timer to 64
>pcieport 0000:00:1c.2: irq 18 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>pci-stub: invalid id string ""
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>ACPI: SSDT 7f65d5b8 001C0 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
>ACPI: SSDT 7f65d36d 001C6 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
>ACPI: SSDT 7f65d778 000C4 (v01  PmRef  Cpu1Ist 00003000 INTL 20050624)
>ACPI: SSDT 7f65d533 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050624)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (68 C)
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery present)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>Fixed MDIO Bus: probed
>ata2: port disabled. ignoring.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>PCI: setting IRQ 7 as level-triggered
>ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 7
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 9, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.33-1.fc13.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 7
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 9, io base 0x0000bf80
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.33-1.fc13.i686 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: setting IRQ 1 as level-triggered
>uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 1
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x0000bf60
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.33-1.fc13.i686 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: setting IRQ 5 as level-triggered
>uhci_hcd 0000:00:1d.2: assigned PCI INT C -> IRQ 5
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000bf40
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.33-1.fc13.i686 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PCI: setting IRQ 2 as level-triggered
>uhci_hcd 0000:00:1d.3: found PCI INT D -> IRQ 2
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 3, io base 0x0000bf20
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.33-1.fc13.i686 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@redhat.com
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 2:70:219
>rtc_cmos 00:06: setting system clock to 2010-03-01 08:13:00 UTC (1267431180)
>Initalizing network drop monitor service
>ata1.00: ATA-6: TOSHIBA MK6008GAH, BU011A, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA48 
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6008GA BU01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 1844k freed
>Write protecting the kernel text: 3812k
>Write protecting the kernel read-only data: 1852k
>mknod used greatest stack depth: 6636 bytes left
>mount used greatest stack depth: 6408 bytes left
>dracut: dracut-004-5.fc13
>udev: starting version 151
>[Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
>[drm] Initialized drm 1.1.0 20060810
>loadkeys used greatest stack depth: 6296 bytes left
>usb 2-2: New USB device found, idVendor=413c, idProduct=a005
>usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>i915 0000:00:02.0: setting latency timer to 64
>[drm] set up 7M of stolen space
>async/0 used greatest stack depth: 6216 bytes left
>usb 2-2.3: new full speed USB device using uhci_hcd and address 3
>async/2 used greatest stack depth: 6120 bytes left
>usb 2-2.3: New USB device found, idVendor=0b97, idProduct=7761
>usb 2-2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-2.3:1.0: USB hub found
>hub 2-2.3:1.0: 3 ports detected
>[drm] initialized overlay support
>usb 2-2.4: new full speed USB device using uhci_hcd and address 4
>usb 2-2.4: New USB device found, idVendor=413c, idProduct=8140
>usb 2-2.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-2.3.2: new full speed USB device using uhci_hcd and address 5
>usb 2-2.3.2: New USB device found, idVendor=0b97, idProduct=7762
>usb 2-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2.3.2: Product: O2Micro CCID SC Reader
>usb 2-2.3.2: Manufacturer: O2
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>modprobe used greatest stack depth: 5020 bytes left
>dracut: Starting plymouth daemon
>yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:0201]
>yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0010, PCI irq 9
>yenta_cardbus 0000:02:01.0: Socket status: 30000006
>pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xefb00000 - 0xefbfffff
>yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
>device-mapper: multipath: version 1.1.1 loaded
>firewire_ohci 0000:02:01.1: assigned PCI INT B -> IRQ 5
>firewire_ohci 0000:02:01.1: sharing IRQ 5 with 0000:00:1f.3
>firewire_ohci 0000:02:01.1: sharing IRQ 5 with 0000:0c:00.0
>firewire_ohci: Added fw-ohci device 0000:02:01.1, OHCI version 1.10
>dracut: Scanning devices sda2  for LVM volume groups 
>dracut: Reading all physical volumes. This may take a while...
>dracut: Found volume group "VolGroup00" using metadata type lvm2
>firewire_core: created device fw0: GUID 484fc00016674070, S400
>dracut: 2 logical volume(s) in volume group "VolGroup00" now active
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/VolGroup00-LogVol00
>dracut: Switching root
>udev: starting version 151
>ACPI: WMI: Mapper loaded
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>intel_rng: FWH not detected
>input: Dell WMI hotkeys as /devices/virtual/input/input7
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>i801_smbus 0000:00:1f.3: assigned PCI INT B -> IRQ 5
>i801_smbus 0000:00:1f.3: sharing IRQ 5 with 0000:0c:00.0
>i801_smbus 0000:00:1f.3: sharing IRQ 5 with 0000:02:01.1
>iTCO_vendor_support: vendor-support=0
>cfg80211: Calling CRDA to update world regulatory domain
>tg3.c:v3.106 (January 12, 2010)
>PCI: setting IRQ 3 as level-triggered
>tg3 0000:09:00.0: assigned PCI INT A -> IRQ 3
>tg3 0000:09:00.0: sharing IRQ 3 with 0000:02:01.2
>tg3 0000:09:00.0: setting latency timer to 64
>eth0: Tigon3 [partno(BCM95752) rev 6002] (PCI Express) MAC address 00:1c:23:36:66:44
>eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:02:01.2: SDHCI controller found [1180:0822] (rev 18)
>sdhci-pci 0000:02:01.2: assigned PCI INT C -> IRQ 3
>sdhci-pci 0000:02:01.2: sharing IRQ 3 with 0000:09:00.0
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:02:01.2] using DMA
>leds_ss4200: no LED devices found
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 2.6.33-1.fc13.i686-kds
>iwl3945: Copyright(c) 2003-2009 Intel Corporation
>iwl3945 0000:0c:00.0: assigned PCI INT A -> IRQ 5
>iwl3945 0000:0c:00.0: sharing IRQ 5 with 0000:00:1f.3
>iwl3945 0000:0c:00.0: sharing IRQ 5 with 0000:02:01.1
>iwl3945 0000:0c:00.0: setting latency timer to 64
>iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
>iwl3945 0000:0c:00.0: irq 19 for MSI/MSI-X
>phy0: Selected rate control algorithm 'iwl-3945-rs'
>HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 1
>HDA Intel 0000:00:1b.0: irq 20 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>ALSA sound/pci/hda/hda_codec.c:4284: autoconfig: line_outs=1 (0xe/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4288:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4292:    hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4293:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4304:    inputs: mic=0xf, fmic=0x0, line=0x10, fline=0x0, cd=0x0, aux=0x0
>input: HDA Intel Line In at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>cfg80211: World regulatory domain updated:
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: Calling CRDA for country: IE
>cfg80211: Regulatory domain changed to country: IE
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>    (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>    (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>EXT3-fs (dm-0): using internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1 extents:1 across:2031608k 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>tg3 0000:09:00.0: irq 21 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>eth0: no IPv6 routers present
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>btusb_intr_complete: hci0 urb f50df790 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f50df840 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f50df6e0 failed to resubmit (1)
>avahi-daemon used greatest stack depth: 4980 bytes left
>iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
>iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
>iwl3945 0000:0c:00.0: Wait for START_ALIVE timeout after 2000ms.
>iwl3945 0000:0c:00.0: Wait for START_ALIVE timeout after 2000ms.
>btusb_intr_complete: hci0 urb f5a19420 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f5a19580 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f5a194d0 failed to resubmit (1)
>fuse init (API version 7.13)
>btusb_intr_complete: hci0 urb f5a19b00 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f5a194d0 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb f5a19a50 failed to resubmit (1)
>compiz[1984]: segfault at 6e098a0 ip 06e098a0 sp bff79450 error 4 in libxcb-aux.so.0.0.0[702a000+2000]
>evolution used greatest stack depth: 4972 bytes left
>evolution used greatest stack depth: 4776 bytes left
>ssh used greatest stack depth: 4728 bytes left
>ssh used greatest stack depth: 4652 bytes left
>evolution used greatest stack depth: 4568 bytes left
>evolution[8598]: segfault at 0 ip (null) sp a8bff19c error 4 in libgpilotdcm.so.2.1.0[110000+6000]
>gcc used greatest stack depth: 4468 bytes left
>npviewer.bin[31418]: segfault at b68ba044 ip 00dc729d sp bf936f48 error 4 in libpthread-2.11.90.so[dbf000+18000]
>gdb[17095]: segfault at 18 ip 08137c18 sp bfacb300 error 4 in gdb[8047000+3fd000]
>swriter.bin[19910]: segfault at 4 ip b28d59d5 sp bf9e3e70 error 4 in libwriterfilterli.so[b269a000+3ec000]
>CE: hpet increasing min_delta_ns to 15000 nsec
>npviewer.bin[30484]: segfault at 13 ip 014d8e87 sp bff18964 error 4 in libflashplayer.so[dfc000+994000]
>npviewer.bin[30564]: segfault at 13 ip 014d8e87 sp bfc4a614 error 4 in libflashplayer.so[dfc000+994000]
>npviewer.bin[31168]: segfault at 13 ip 014d8e87 sp bf82d464 error 4 in libflashplayer.so[dfc000+994000]
>npviewer.bin[14989] general protection ip:136657c sp:bfd7c0a0 error:0 in libflashplayer.so[ff4000+994000]
>npviewer.bin[15014]: segfault at 13 ip 014d8e87 sp bfa84474 error 4 in libflashplayer.so[dfc000+994000]
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>mount.nfs used greatest stack depth: 4192 bytes left
>cat used greatest stack depth: 4168 bytes left
>dmake used greatest stack depth: 4104 bytes left
>npviewer.bin[15199] general protection ip:116e57c sp:bfb89120 error:0 in libflashplayer.so[dfc000+994000]
>ln used greatest stack depth: 3976 bytes left
>idlc used greatest stack depth: 3956 bytes left
>perl used greatest stack depth: 3908 bytes left
>cc1plus used greatest stack depth: 3880 bytes left
>cc1plus used greatest stack depth: 3776 bytes left
>evolution[8638]: segfault at a0 ip 08393b03 sp bf929900 error 4 in libevolution-mail.so.0.0.0[835e000+ab000]
>rm used greatest stack depth: 3656 bytes left
>cc1plus used greatest stack depth: 3620 bytes left
>Warning: dev (pts15) tty->count(4) != #fd's(3) in tty_release_dev
>btusb_intr_complete: hci0 urb cc88ff20 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb cc88fd10 failed to resubmit (1)
>btusb_bulk_complete: hci0 urb cc88f210 failed to resubmit (1)
>cp used greatest stack depth: 3492 bytes left
>NOHZ: local_softirq_pending 100

Actions: View

Attachments on bug 557317: 385820 | 385821 | 385822 | 385965 | 398009 | 398012 | 398013 | 398014 | 398016 | 398017 | 438547