Attachment 463902 Details for Bug 658736 – dmesg output

dmesg output

o.dmesg.out (text/plain), 45.41 KB, created by Wendell Baker on 2010-12-01 05:36:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wendell Baker

Created: 2010-12-01 05:36:36 UTC

Size: 45.41 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.34.7-56.fc13.i686.PAE (mockbuild@x86-09.phx2.fedoraproject.org) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Sep 15 03:27:15 UTC 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cf6b0000 (usable)
> BIOS-e820: 00000000cf6b0000 - 00000000cf6be000 (ACPI data)
> BIOS-e820: 00000000cf6be000 - 00000000cf6f0000 (ACPI NVS)
> BIOS-e820: 00000000cf6f0000 - 00000000cf6fe000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>NX (Execute Disable) protection: active
>DMI present.
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x130000 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 100000000 mask FE0000000 write-back
>  2 base 120000000 mask FF0000000 write-back
>  3 base 0D0000000 mask FF0000000 uncachable
>  4 base 0E0000000 mask FE0000000 uncachable
>  5 base 0CF700000 mask FFFF00000 uncachable
>  6 base 0CF800000 mask FFF800000 uncachable
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 4GB, range: 512MB, type WB
>reg 2, base: 4608MB, range: 256MB, type WB
>reg 3, base: 3328MB, range: 256MB, type UC
>reg 4, base: 3584MB, range: 512MB, type UC
>reg 5, base: 3319MB, range: 1MB, type UC
>reg 6, base: 3320MB, range: 8MB, type UC
>total RAM covered: 4087M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 7  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3319MB, range: 1MB, type UC
>reg 4, base: 3320MB, range: 8MB, type UC
>reg 5, base: 4GB, range: 512MB, type WB
>reg 6, base: 4608MB, range: 256MB, type WB
>e820 update range: 00000000cf700000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01000000
>found SMP MP-table at [c00ff780] ff780
>init_memory_mapping: 0000000000000000-00000000375fe000
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037400000 page 2M
> 0037400000 - 00375fe000 page 4k
>kernel direct mapping tables up to 375fe000 @ 7000-f000
>RAMDISK: 37414000 - 37ff0000
>Allocated new RAMDISK: 00b69000 - 0174433a
>Move RAMDISK from 0000000037414000 - 0000000037fef339 to 00b69000 - 01744339
>ACPI: RSDP 000f9160 00024 (v02 ACPIAM)
>ACPI: XSDT cf6b0100 00054 (v01 082109 XSDT1535 20090821 MSFT 00000097)
>ACPI: FACP cf6b0290 000F4 (v03 082109 FACP1535 20090821 MSFT 00000097)
>ACPI: DSDT cf6b0440 0541B (v01  A7517 A7517130 00000130 INTL 20051117)
>ACPI: FACS cf6be000 00040
>ACPI: APIC cf6b0390 0006C (v01 082109 APIC1535 20090821 MSFT 00000097)
>ACPI: MCFG cf6b0400 0003C (v01 082109 OEMMCFG  20090821 MSFT 00000097)
>ACPI: OEMB cf6be040 00071 (v01 082109 OEMB1535 20090821 MSFT 00000097)
>ACPI: GSCI cf6be0c0 02024 (v01 082109 GMCHSCI  20090821 MSFT 00000097)
>ACPI: SSDT cf6c0af0 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>3978MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>  node 0 low ram: 00000000 - 375fe000
>  node 0 bootmap 0000b000 - 00011ec0
>(13/32 early reservations) ==> bootmem [0000000000 - 00375fe000]
>  #0 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #1 [0000400000 - 0000b5fb30]    TEXT DATA BSS ==> [0000400000 - 0000b5fb30]
>  #2 [0000b60000 - 0000b68158]              BRK ==> [0000b60000 - 0000b68158]
>  #3 [00000ff790 - 0000100000]    BIOS reserved ==> [00000ff790 - 0000100000]
>  #4 [00000ff780 - 00000ff790]     MP-table mpf ==> [00000ff780 - 00000ff790]
>  #5 [000009fc00 - 00000fc6d0]    BIOS reserved ==> [000009fc00 - 00000fc6d0]
>  #6 [00000fc84c - 00000ff780]    BIOS reserved ==> [00000fc84c - 00000ff780]
>  #7 [00000fc6d0 - 00000fc84c]     MP-table mpc ==> [00000fc6d0 - 00000fc84c]
>  #8 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
>  #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
>  #10 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #11 [0000b69000 - 0001745000]      NEW RAMDISK ==> [0000b69000 - 0001745000]
>  #12 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  Normal   0x00001000 -> 0x000375fe
>  HighMem  0x000375fe -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000001 -> 0x0000009f
>    0: 0x00000100 -> 0x000cf6b0
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1046094
>free_area_init_node: node 0, pgdat c09d34c0, node_mem_map c1746020
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3966 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 7957 pages used for memmap
>  HighMem zone: 811421 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at cf6fe000 (gap: cf6fe000:2f702000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 15 pages/cpu @c3e00000 s37716 r0 d23724 u524288
>pcpu-alloc: s37716 r0 d23724 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1036365
>Kernel command line: ro root=/dev/mapper/vg_suffragette-lv_root rd_LUKS_UUID=luks-52d7b13a-3fe2-4577-95cb-425e6c033d73 rd_LVM_LV=vg_suffragette/lv_root rd_LVM_LV=vg_suffragette/lv_swap rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>allocated 24903660 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000375fe:00130000)
>Memory: 4100264k/4980736k available (3746k kernel code, 84112k reserved, 2345k data, 564k init, 3277512k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc09f3000 - 0xc0a80000   ( 564 kB)
>      .data : 0xc07a898e - 0xc09f2fb8   (2345 kB)
>      .text : 0xc0400000 - 0xc07a898e   (3746 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:1280
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2992.366 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5984.73 BogoMIPS (lpj=2992366)
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20100121
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20194 entries in 40 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q9650  @ 3.00GHz stepping 0a
>APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
>APIC delta adjusted to PM-Timer: 2078120 (2908935)
>Booting Node   0, Processors  #1
>Initializing CPU#1
> #2
>Initializing CPU#2
> #3 Ok.
>Initializing CPU#3
>Brought up 4 CPUs
>Total of 4 processors activated (23939.65 BogoMIPS).
>sizeof(vma)=92 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=508 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=3264 bytes
>devtmpfs: initialized
>Time:  3:34:11  Date: 12/01/10
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: not using MMCONFIG
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: SSDT cf6c00f0 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
>ACPI: SSDT cf6c0370 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
>ACPI: SSDT cf6c05f0 00277 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
>ACPI: SSDT cf6c0870 00277 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: No dock devices found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xcf700000-0xdfffffff] (ignored)
>pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
>pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
>pci 0000:00:02.0: reg 14: [io  0xdc00-0xdc07]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
>pci 0000:00:02.0: reg 1c: [mem 0xfe800000-0xfe8fffff]
>pci 0000:00:02.1: reg 10: [mem 0xfe780000-0xfe7fffff]
>pci 0000:00:1b.0: reg 10: [mem 0xfe978000-0xfe97bfff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xd880-0xd89f]
>pci 0000:00:1d.1: reg 20: [io  0xd800-0xd81f]
>pci 0000:00:1d.2: reg 20: [io  0xd480-0xd49f]
>pci 0000:00:1d.3: reg 20: [io  0xd400-0xd41f]
>pci 0000:00:1d.7: reg 10: [mem 0xfe977c00-0xfe977fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
>pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 00ff)
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
>pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10: [io  0xd080-0xd087]
>pci 0000:00:1f.2: reg 14: [io  0xd000-0xd003]
>pci 0000:00:1f.2: reg 18: [io  0xcc00-0xcc07]
>pci 0000:00:1f.2: reg 1c: [io  0xc880-0xc883]
>pci 0000:00:1f.2: reg 20: [io  0xc800-0xc80f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
>pci 0000:01:00.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
>pci 0000:01:00.0: PME# supported from D0 D3hot
>pci 0000:01:00.0: PME# disabled
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:02:00.0: reg 10: [io  0xe800-0xe8ff]
>pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
>pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffffffffffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
>reserve RAM buffer: 00000000cf6b0000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet clockevent registered
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
>system 00:0a: [io  0x0a00-0x0a0f] has been reserved
>system 00:0a: [io  0x0a10-0x0a1f] has been reserved
>system 00:0b: [io  0x04d0-0x04d1] has been reserved
>system 00:0b: [io  0x0800-0x087f] has been reserved
>system 00:0b: [io  0x0480-0x04bf] has been reserved
>system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0b: [mem 0xfed45000-0xfed89fff] has been reserved
>system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
>system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
>system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:10: [mem 0x00100000-0xcf6fffff] could not be reserved
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
>pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 03-03]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
>pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
>pci_bus 0000:03: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:03: resource 5 [mem 0x00000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 12144k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1291174451.574:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1630
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.1: setting latency timer to 64
>pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 1462 ss_did 7517
>pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
>pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 1462 ss_did 7517
>pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>pci-stub: invalid id string ""
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G33 Chipset
>agpgart-intel 0000:00:00.0: detected 7164K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
>ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe977c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.34.7-56.fc13.i686.PAE ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.34.7-56.fc13.i686.PAE uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.34.7-56.fc13.i686.PAE uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.34.7-56.fc13.i686.PAE uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.34.7-56.fc13.i686.PAE uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>No TPM chip found, activating TPM-bypass!
>  Magic number: 6:455:562
>rtc_cmos 00:03: setting system clock to 2010-12-01 03:34:13 UTC (1291174453)
>Initalizing network drop monitor service
>ata4.01: NODEV after polling detection
>ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133
>ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST31000528AS     CC38 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 2:0:0:0: Attached scsi generic sg0 type 0
> sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>ata4.00: ATAPI: TSSTcorp CDDVDW SN-S083B, SB02, max UDMA/100
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/100
>scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-S083B  SB02 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>Freeing unused kernel memory: 564k freed
>Write protecting the kernel text: 3748k
>Write protecting the kernel read-only data: 1776k
>dracut: dracut-005-3.fc13
>udev: starting version 153
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>i915 0000:00:02.0: irq 26 for MSI/MSI-X
>[drm] set up 7M of stolen space
>usb 1-1: New USB device found, idVendor=0424, idProduct=2504
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0
>[drm] initialized overlay support
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>usb 1-3: New USB device found, idVendor=058f, idProduct=6254
>usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 4 ports detected
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
>fbcon: inteldrmfb (fb0) is primary device
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: New USB device found, idVendor=04fc, idProduct=0561
>usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-2: Product: Generic Digital camera
>usb 3-2: Manufacturer: Sunplus Technology Co., Ltd.
>Console: switching to colour frame buffer device 240x75
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>No ACPI video bus found
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>usb 4-1: new low speed USB device using uhci_hcd and address 2
>usb 4-1: New USB device found, idVendor=0458, idProduct=3351
>usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-1: Product: SlimStar 335
>usb 4-1: Manufacturer: Genius
>input: Genius SlimStar 335 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
>generic-usb 0003:0458:3351.0001: input,hidraw0: USB HID v1.11 Keyboard [Genius SlimStar 335] on usb-0000:00:1d.2-1/input0
>input: Genius SlimStar 335 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input4
>generic-usb 0003:0458:3351.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Genius SlimStar 335] on usb-0000:00:1d.2-1/input1
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>usb 1-1.2: new full speed USB device using ehci_hcd and address 6
>usb 1-1.2: New USB device found, idVendor=0a12, idProduct=0001
>usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>dracut: luksOpen /dev/sda2 luks-52d7b13a-3fe2-4577-95cb-425e6c033d73
>usb 1-3.2: new low speed USB device using ehci_hcd and address 7
>usb 1-3.2: New USB device found, idVendor=047d, idProduct=102a
>usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-3.2: Product: Kensington USB/PS2 Wheel Mouse
>usb 1-3.2: Manufacturer: Kensington     
>input: Kensington      Kensington USB/PS2 Wheel Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.0/input/input5
>generic-usb 0003:047D:102A.0003: input,hidraw2: USB HID v1.10 Mouse [Kensington      Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1d.7-3.2/input0
>usb 1-3.3: new full speed USB device using ehci_hcd and address 8
>usb 1-3.3: New USB device found, idVendor=03f0, idProduct=0505
>usb 1-3.3: New USB device strings: Mfr=64, Product=97, SerialNumber=0
>usb 1-3.3: Product: HP ScanJet 2100C
>usb 1-3.3: Manufacturer: Hewlett-Packard
>padlock: VIA PadLock not detected.
>dracut: Scanning devices dm-0  for LVM logical volumes vg_suffragette/lv_root vg_suffragette/lv_swap 
>dracut: inactive '/dev/vg_suffragette/lv_root' [50.00 GiB] inherit
>dracut: inactive '/dev/vg_suffragette/lv_swap' [7.91 GiB] inherit
>dracut: inactive '/dev/vg_suffragette/lv_local' [775.44 GiB] inherit
>dracut: inactive '/dev/vg_suffragette/lv_home' [97.66 GiB] inherit
>EXT4-fs (dm-1): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/vg_suffragette-lv_root
>dracut: Loading SELinux policy
>type=1404 audit(1291174469.351:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 200131 rules.
>SELinux: 2048 avtab hash slots, 200131 rules.
>SELinux:  9 users, 13 roles, 3329 types, 171 bools, 1 sens, 1024 cats
>SELinux:  77 classes, 200131 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1291174469.646:3): policy loaded auid=4294967295 ses=4294967295
>dracut: Switching root
>readahead-collector: starting
>udev: starting version 153
>microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
>microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
>microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
>microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>intel_rng: FWH not detected
>ppdev: user-space parallel port driver
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>r8169 0000:02:00.0: setting latency timer to 64
>r8169 0000:02:00.0: irq 27 for MSI/MSI-X
>r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf95e0000, 00:0d:05:04:df:13, XID 18000000 IRQ 27
>iTCO_vendor_support: vendor-support=0
>Linux video capture interface: v2.00
>gspca: main v2.9.0 registered
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: unable to reset NO_REBOOT flag, platform may have disabled it
>gspca: probing 04fc:0561
>leds_ss4200: no LED devices found
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>rt2860 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>rt2860 0000:01:00.0: setting latency timer to 64
>
>
>=== pAd = fb092000, size = 502624 ===
>
><-- RTMPAllocAdapterBlock, Status=0
>pAd->CSRBaseAddress =0xfb080000, csr_addr=0xfb080000!
>input: spca561 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/input/input6
>gspca: video0 created
>usbcore: registered new interface driver spca561
>spca561: registered
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC888: BIOS auto-probing.
>ALSA sound/pci/hda/hda_codec.c:4385: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4389:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4393:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
>ALSA sound/pci/hda/hda_codec.c:4394:    mono: mono_out=0x0
>ALSA sound/pci/hda/hda_codec.c:4397:    dig-out=0x1e/0x0
>ALSA sound/pci/hda/hda_codec.c:4405:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x1b
>ALSA sound/pci/hda/patch_realtek.c:1287: realtek: No valid SSID, checking pincfg 0x40020403 for NID 0x1d
>ALSA sound/pci/hda/patch_realtek.c:1303: realtek: Enabling init ASM_ID=0x0403 CODEC_ID=10ec0888
>EXT4-fs (sda1): mounted filesystem with ordered data mode
>SELinux: initialized (dev sda1, type ext4), uses xattr
>EXT4-fs (dm-4): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-4, type ext4), uses xattr
>EXT4-fs (dm-3): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-3, type ext4), uses xattr
>Adding 8290300k swap on /dev/mapper/vg_suffragette-lv_swap.  Priority:-1 extents:1 across:8290300k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>readahead-disable-service: delaying service auditd
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>CAPI 2.0 started up with major 68 (middleware+capifs)
>SELinux: initialized (dev capifs, type capifs), uses genfs_contexts
>RX DESC f69ae000  size = 2048
><-- RTMPAllocTxRxRingMemory, Status=0
>Key1Str is Invalid key length(0) or Type(0)
>Key2Str is Invalid key length(0) or Type(0)
>Key3Str is Invalid key length(0) or Type(0)
>Key4Str is Invalid key length(0) or Type(0)
>1. Phy Mode = 5
>2. Phy Mode = 5
>3. Phy Mode = 9
>RTMPSetPhyMode: channel is out of range, use first channel=1 
>MCS Set = ff ff 00 00 01
><==== rt28xx_init, Status=0
>0x1300 = 00064300
>RX DESC f69ae000  size = 2048
><-- RTMPAllocTxRxRingMemory, Status=0
>Key1Str is Invalid key length(0) or Type(0)
>Key2Str is Invalid key length(0) or Type(0)
>Key3Str is Invalid key length(0) or Type(0)
>Key4Str is Invalid key length(0) or Type(0)
>1. Phy Mode = 5
>2. Phy Mode = 5
>3. Phy Mode = 9
>RTMPSetPhyMode: channel is out of range, use first channel=1 
>MCS Set = ff ff 00 00 01
><==== rt28xx_init, Status=0
>0x1300 = 00064300
>r8169 0000:02:00.0: eth0: link up
>r8169 0000:02:00.0: eth0: link up
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>ra0: no IPv6 routers present
>eth0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>NET: Registered protocol family 15
>intel_rng: FWH not detected
>padlock: VIA PadLock not detected.
>padlock: VIA PadLock Hash Engine not detected.
>padlock: VIA PadLock not detected.
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>alg: No test for cipher_null (cipher_null-generic)
>alg: No test for ecb(cipher_null) (ecb-cipher_null)
>alg: No test for digest_null (digest_null-generic)
>alg: No test for compress_null (compress_null-generic)
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>readahead-collector: starting delayed service auditd
>readahead-collector: sorting
>readahead-collector: finished
>fuse init (API version 7.13)
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>FS-Cache: Loaded
>FS-Cache: Netfs 'nfs' registered for caching
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1d, type nfs), uses genfs_contexts
>==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1f, type nfs), uses genfs_contexts
>process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>SELinux: initialized (dev 0:20, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>npviewer.bin[7652]: segfault at 194 ip 0110c18a sp bfe32240 error 4 in libflashplayer.so[dfe000+b2c000]
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>tracker-extract[12956]: segfault at 0 ip 071b4ecd sp bfa1d4e0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15179]: segfault at 0 ip 071b4ecd sp bff277a0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15220]: segfault at 0 ip 071b4ecd sp bf928e80 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15234]: segfault at 0 ip 071b4ecd sp bffa3020 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15238]: segfault at 0 ip 071b4ecd sp bfc8bf40 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15241]: segfault at 0 ip 071b4ecd sp bfcd4a60 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15247]: segfault at 0 ip 071b4ecd sp bfc7a700 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15252]: segfault at 0 ip 071b4ecd sp bf8a8330 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15255]: segfault at 0 ip 071b4ecd sp bfe4a2e0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[15270]: segfault at 0 ip 071b4ecd sp bff517d0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>nautilus[2776]: segfault at 0 ip 08105230 sp bfb37220 error 4 in nautilus[8045000+1da000]
>evince[16235]: segfault at 0 ip 071b4ecd sp b1cfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[16363]: segfault at 0 ip 071b4ecd sp b1ba2820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[16383]: segfault at 0 ip 071b4ecd sp b1ca2820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince-thumbnai[16391]: segfault at 0 ip 071b4ecd sp bfb7aed0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>tracker-extract[16929]: segfault at 0 ip 071b4ecd sp bf879300 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince-thumbnai[17476]: segfault at 0 ip 071b4ecd sp bfcbf2e0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[17047]: segfault at 0 ip 071b4ecd sp bf84d5f0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince-thumbnai[17495]: segfault at 0 ip 071b4ecd sp bf9c94a0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[17492]: segfault at 0 ip 071b4ecd sp bfa3dda0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[17508]: segfault at 0 ip 071b4ecd sp b1dd3820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[17551]: segfault at 0 ip 071b4ecd sp b1bfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince-thumbnai[17567]: segfault at 0 ip 071b4ecd sp bf8b9700 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>tracker-extract[17502]: segfault at 0 ip 071b4ecd sp bfadcf90 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>evince[17742]: segfault at 0 ip 071b4ecd sp b1bfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[17932]: segfault at 0 ip 071b4ecd sp b1cfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[17966]: segfault at 0 ip 071b4ecd sp b1cfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[17981]: segfault at 0 ip 071b4ecd sp b1bfe8c0 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>evince[18101]: segfault at 0 ip 071b4ecd sp b1cfe820 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>RX DESC eddaa000  size = 2048
><-- RTMPAllocTxRxRingMemory, Status=0
>Key1Str is Invalid key length(0) or Type(0)
>Key2Str is Invalid key length(0) or Type(0)
>Key3Str is Invalid key length(0) or Type(0)
>Key4Str is Invalid key length(0) or Type(0)
>1. Phy Mode = 5
>2. Phy Mode = 5
>3. Phy Mode = 9
>RTMPSetPhyMode: channel is out of range, use first channel=1 
>MCS Set = ff ff 00 00 01
><==== rt28xx_init, Status=0
>0x1300 = 00064300
>ra0: no IPv6 routers present
>SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1f, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:20, type nfs), uses genfs_contexts
>==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
>tracker-extract[26670]: segfault at 0 ip 071b4ecd sp bfac1d30 error 4 in libjpeg.so.62.0.0[71a8000+22000]
>SELinux: initialized (dev 0:1c, type nfs), uses genfs_contexts
>SELinux: initialized (dev 0:1e, type nfs), uses genfs_contexts

Actions: View

Attachments on bug 658736: 463900 | 463901 | 463902 | 463903