Attachment 505988 Details for Bug 692372 – dmesg after resume

dmesg after resume

dmesg.txt (text/plain), 59.44 KB, created by Vladimir Benes on 2011-06-22 12:11:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Vladimir Benes

Created: 2011-06-22 12:11:03 UTC

Size: 59.44 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-131.4.1.el6.i686 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Fri Jun 10 10:53:52 EDT 2011
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable)
> BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved)
> BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable)
> BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved)
> BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS)
> BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved)
> BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable)
> BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved)
> BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS)
> BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved)
> BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable)
> BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved)
> BIOS-e820: 00000000bf71f000 - 00000000bf76b000 (usable)
> BIOS-e820: 00000000bf76b000 - 00000000bf777000 (ACPI NVS)
> BIOS-e820: 00000000bf777000 - 00000000bf77a000 (ACPI data)
> BIOS-e820: 00000000bf77a000 - 00000000bf781000 (ACPI NVS)
> BIOS-e820: 00000000bf781000 - 00000000bf782000 (ACPI data)
> BIOS-e820: 00000000bf782000 - 00000000bf78b000 (ACPI NVS)
> BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data)
> BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS)
> BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data)
> BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable)
> BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
>DMI present.
>SMBIOS version 2.6 @ 0xF6800
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x138000 max_arch_pfn = 0x400000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-DBFFF uncachable
>  DC000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 disabled
>  1 base 000000000 mask F80000000 write-back
>  2 base 080000000 mask FC0000000 write-back
>  3 base 100000000 mask FC0000000 write-back
>  4 base 138000000 mask FF8000000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 1, base: 0GB, range: 2GB, type WB
>reg 2, base: 2GB, range: 1GB, type WB
>reg 3, base: 4GB, range: 1GB, type WB
>reg 4, base: 4992MB, range: 128MB, type UC
>total RAM covered: 3968M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 256M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 4GB, range: 1GB, type WB
>reg 3, base: 4992MB, range: 128MB, type UC
>e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
>initial memory mapped : 0 - 01000000
>init_memory_mapping: 0000000000000000-00000000375fe000
>NX (Execute Disable) protection: active
> 0000000000 - 0000200000 page 4k
> 0000200000 - 0037400000 page 2M
> 0037400000 - 00375fe000 page 4k
>kernel direct mapping tables up to 375fe000 @ 7000-f000
>RAMDISK: 372a6000 - 37fef297
>Allocated new RAMDISK: 00bf7000 - 01940297
>Move RAMDISK from 00000000372a6000 - 0000000037fef296 to 00bf7000 - 01940296
>ACPI: RSDP 000f6880 00024 (v02 LENOVO)
>ACPI: XSDT bf7ef338 0009C (v01 LENOVO TP-6I    00001250  LTP 00000000)
>ACPI: FACP bf7ef400 000F4 (v04 LENOVO TP-6I    00001250 LNVO 00000001)
>ACPI: DSDT bf7ef7d1 0F2F8 (v01 LENOVO TP-6I    00001250 MSFT 03000001)
>ACPI: FACS bf6e7000 00040
>ACPI: SSDT bf7ef5b4 0021D (v01 LENOVO TP-6I    00001250 MSFT 03000001)
>ACPI: ECDT bf7feac9 00052 (v01 LENOVO TP-6I    00001250 LNVO 00000001)
>ACPI: APIC bf7feb1b 00084 (v01 LENOVO TP-6I    00001250 LNVO 00000001)
>ACPI: MCFG bf7febd7 0003C (v01 LENOVO TP-6I    00001250 LNVO 00000001)
>ACPI: HPET bf7fec13 00038 (v01 LENOVO TP-6I    00001250 LNVO 00000001)
>ACPI: ASF! bf7fedbe 000A4 (v16 LENOVO TP-6I    00001250 PTL  00000001)
>ACPI: SLIC bf7fee62 00176 (v01 LENOVO TP-6I    00001250  LTP 00000000)
>ACPI: BOOT bf7fefd8 00028 (v01 LENOVO TP-6I    00001250  LTP 00000001)
>ACPI: SSDT bf6e591a 0084B (v01 LENOVO TP-6I    00001250 INTL 20050513)
>ACPI: TCPA bf78b000 00032 (v02    PTL  CRESTLN 06040000      00005A52)
>ACPI: DMAR bf781000 00080 (v01 INTEL  CP_DALE  00000001 INTL 00000001)
>ACPI: SSDT bf779000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20061109)
>ACPI: SSDT bf778000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20061109)
>ACPI: SSDT bf777000 0049F (v01  PmRef    ApTst 00003000 INTL 20061109)
>ACPI: Local APIC address 0xfee00000
>4106MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>  node 0 low ram: 00000000 - 375fe000
>  node 0 bootmap 0000b000 - 00011ec0
>(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0000400000 - 0000bede50]    TEXT DATA BSS ==> [0000400000 - 0000bede50]
>  #4 [000009e800 - 0000100000]    BIOS reserved ==> [000009e800 - 0000100000]
>  #5 [0000bee000 - 0000bf6138]              BRK ==> [0000bee000 - 0000bf6138]
>  #6 [0000007000 - 000000b000]          PGTABLE ==> [0000007000 - 000000b000]
>  #7 [0000bf7000 - 0001940297]      NEW RAMDISK ==> [0000bf7000 - 0001940297]
>  #8 [000000b000 - 0000012000]          BOOTMAP ==> [000000b000 - 0000012000]
>found SMP MP-table at [c00f68c0] f68c0
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  Normal   0x00001000 -> 0x000375fe
>  HighMem  0x000375fe -> 0x00138000
>Movable zone start PFN for each node
>early_node_map[8] active PFN ranges
>    0: 0x00000001 -> 0x0000009e
>    0: 0x00000100 -> 0x000bf27c
>    0: 0x000bf282 -> 0x000bf35f
>    0: 0x000bf40f -> 0x000bf46f
>    0: 0x000bf70f -> 0x000bf717
>    0: 0x000bf71f -> 0x000bf76b
>    0: 0x000bf7ff -> 0x000bf800
>    0: 0x00100000 -> 0x00138000
>On node 0 totalpages: 1012651
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3965 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 8213 pages used for memmap
>  HighMem zone: 777723 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c3a00000 s34456 r0 d22888 u524288
>pcpu-alloc: s34456 r0 d22888 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1002666
>Kernel command line: ro root=/dev/mapper/BVG-61 rd_LVM_LV=BVG/61 rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000375fe:00138000)
>Memory: 3993664k/5111808k available (4259k kernel code, 55748k reserved, 2260k data, 524k init, 3143744k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffad5000 - 0xfffff000   (5288 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc0a5e000 - 0xc0ae1000   ( 524 kB)
>      .data : 0xc0828c6b - 0xc0a5dfa8   (2260 kB)
>      .text : 0xc0400000 - 0xc0828c6b   (4259 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>NR_IRQS:2304 nr_irqs:440
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 20971520 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>  alloc irq_desc for 24 on node 0
>  alloc kstat_irqs on node 0
>  alloc irq_desc for 25 on node 0
>  alloc kstat_irqs on node 0
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>  alloc irq_desc for 27 on node 0
>  alloc kstat_irqs on node 0
>HPET: 8 timers in total, 4 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2659.690 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.38 BogoMIPS (lpj=2659690)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090903
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i7 CPU       M 620  @ 2.67GHz stepping 02
>Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>Booting Node   0, Processors  #1
>Initializing CPU#1
> #2
>Initializing CPU#2
> #3 Ok.
>Initializing CPU#3
>Brought up 4 CPUs
>Total of 4 processors activated (21278.62 BogoMIPS).
>sizeof(vma)=100 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=352 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=508 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=184 bytes
>sizeof(task_struct)=1332 bytes
>devtmpfs: initialized
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in E820
>PCI: Using MMCONFIG for extended config space
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: EC description table is found, configuring boot EC
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
>ACPI: Power Resource [PUBS] (on)
>ACPI: ACPI Dock Station Driver: 2 docks/bays found
>ACPI: PCI Root Bridge [UNCR] (0000:ff)
>pci_bus 0000:ff: on NUMA node 0
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:16.0: reg 10 64bit mmio: [0xf2427800-0xf242780f]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:16.3: reg 10 io port: [0x1800-0x1807]
>pci 0000:00:16.3: reg 14 32bit mmio: [0xf2424000-0xf2424fff]
>pci 0000:00:19.0: reg 10 32bit mmio: [0xf2400000-0xf241ffff]
>pci 0000:00:19.0: reg 14 32bit mmio: [0xf2425000-0xf2425fff]
>pci 0000:00:19.0: reg 18 io port: [0x1820-0x183f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 10 32bit mmio: [0xf2428000-0xf24283ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2420000-0xf2423fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1d.0: reg 10 32bit mmio: [0xf2428400-0xf24287ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
>pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
>pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
>pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
>pci 0000:00:1f.2: reg 20 io port: [0x1840-0x185f]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2427000-0xf24277ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2428800-0xf24288ff]
>pci 0000:00:1f.3: reg 20 io port: [0x1860-0x187f]
>pci 0000:00:1f.6: reg 10 64bit mmio: [0xf2426000-0xf2426fff]
>pci 0000:01:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff]
>pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
>pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
>pci 0000:01:00.1: reg 10 32bit mmio: [0xcdefc000-0xcdefffff]
>pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xcdefffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
>pci 0000:03:00.0: reg 10 64bit mmio: [0xf2000000-0xf2001fff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.1: bridge 32bit mmio: [0xf2000000-0xf20fffff]
>pci 0000:0d:00.0: reg 10 32bit mmio: [0xf2100000-0xf21000ff]
>pci 0000:0d:00.0: supports D1 D2
>pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:00.0: PME# disabled
>pci 0000:0d:00.1: reg 10 32bit mmio: [0xf2100400-0xf21004ff]
>pci 0000:0d:00.1: supports D1 D2
>pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:0d:00.1: PME# disabled
>pci 0000:00:1c.4: bridge 32bit mmio: [0xf2100000-0xf21fffff]
>pci 0000:00:1e.0: transparent bridge
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>HEST: Table is not found!
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>hpet: hpet2 irq 24 for MSI
>hpet: hpet3 irq 25 for MSI
>hpet: hpet4 irq 26 for MSI
>hpet: hpet5 irq 27 for MSI
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: iomem range 0x0-0x9ffff could not be reserved
>system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>system 00:00: iomem range 0xc8000-0xcbfff has been reserved
>system 00:00: iomem range 0xcc000-0xcffff could not be reserved
>system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
>system 00:00: iomem range 0xdc000-0xdffff could not be reserved
>system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
>system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
>system 00:00: iomem range 0xe8000-0xebfff could not be reserved
>system 00:00: iomem range 0xec000-0xeffff could not be reserved
>system 00:00: iomem range 0xf0000-0xfffff could not be reserved
>system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
>system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
>system 00:03: ioport range 0x164e-0x164f has been reserved
>system 00:03: ioport range 0x1000-0x107f has been reserved
>system 00:03: ioport range 0x1180-0x11ff has been reserved
>system 00:03: ioport range 0x800-0x80f has been reserved
>system 00:03: ioport range 0x15e0-0x15ef has been reserved
>system 00:03: ioport range 0x1600-0x1641 has been reserved
>system 00:03: ioport range 0x1644-0x167f could not be reserved
>system 00:03: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:03: iomem range 0xfeaff000-0xfeafffff has been reserved
>system 00:03: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:03: iomem range 0xfed10000-0xfed13fff has been reserved
>system 00:03: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:03: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:03: iomem range 0xfed45000-0xfed4bfff has been reserved
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   bridge window [0x2000-0x2fff]
>pci 0000:00:01.0:   bridge window [0xcc000000-0xcdefffff]
>pci 0000:00:01.0:   bridge window [0xce000000-0xdfffffff]
>pci 0000:00:1c.0: PCI bridge to [bus 02-02]
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   bridge window [io  disabled]
>pci 0000:00:1c.0:   bridge window [mem disabled]
>pci 0000:00:1c.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.1: PCI bridge to [bus 03-03]
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.1:   bridge window [io  disabled]
>pci 0000:00:1c.1:   bridge window [0xf2000000-0xf20fffff]
>pci 0000:00:1c.1:   bridge window [mem pref disabled]
>pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
>pci 0000:00:1c.4:   bridge window [io  disabled]
>pci 0000:00:1c.4:   bridge window [0xf2100000-0xf21fffff]
>pci 0000:00:1c.4:   bridge window [mem pref disabled]
>pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:01.0: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>  alloc irq_desc for 16 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>  alloc irq_desc for 20 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>  alloc irq_desc for 21 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.4: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.4: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:ff: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
>pci_bus 0000:01: resource 1 mem: [0xcc000000-0xcdefffff]
>pci_bus 0000:01: resource 2 pref mem [0xce000000-0xdfffffff]
>pci_bus 0000:03: resource 1 mem: [0xf2000000-0xf20fffff]
>pci_bus 0000:0d: resource 1 mem: [0xf2100000-0xf21fffff]
>pci_bus 0000:0e: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:0e: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 13604k freed
>DMAR: Host address width 36
>DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>IOMMU fed90000: ver 1:0 cap c9008020e30272 ecap 1000
>DMAR: DRHD base: 0x000000fed93000 flags: 0x1
>IOMMU fed93000: ver 1:0 cap c9008020630272 ecap 1000
>DMAR: RMRR base: 0x000000bf6e9000 end: 0x000000bf6fffff
>DMAR: No ATSR found
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1308751472.871:1): initialized
>highmem bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1688
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key 84E2C000171F2E26
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>pcieport 0000:00:1c.0: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>pcieport 0000:00:1c.1: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>pcieport 0000:00:1c.4: PCIe errors handled by OS.
>Firmware did not grant requested _OSC control
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>pci-stub: invalid id string ""
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x25
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [AC] (off-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idleACPI: SSDT bf71a598 004F3 (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
>ACPI: SSDT bf718718 006B2 (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
>processor LNXCPU:00: registered as cooling_device0
>ACPI: SSDT bf719a98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
>ACPI: SSDT bf717d98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM0] (57 C)
>ERST: Table is not found!
>isapnp: Scanning for PnP cards...
>ACPI: Battery Slot [BAT0] (battery present)
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>tpm_tis 00:0b: 1.2 TPM (device-id 0x0, rev-id 78)
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>  alloc irq_desc for 17 on node -1
>  alloc kstat_irqs on node -1
>serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>0000:00:16.3: ttyS0 at I/O 0x1800 (irq = 17) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input3
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>  alloc irq_desc for 23 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-131.4.1.el6.i686 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>  alloc irq_desc for 19 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-131.4.1.el6.i686 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>registered taskstats version 1
>rtc_cmos 00:08: setting system clock to 2011-06-22 14:04:34 UTC (1308751474)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 524k freed
>Write protecting the kernel text: 4260k
>Write protecting the kernel read-only data: 1828k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>dracut: dracut-004-53.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.20.6-ioctl (2011-02-02) initialised: dm-devel@redhat.com
>udev: starting version 147
>acpi device:0b: registered as cooling_device4
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5
>ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8600a2)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 70.18.42.00
>[drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
>[drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01800323 00010034
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02811300 00000000
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 028223a6 0f220010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02822362 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 4: 048333b6 0f220010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 5: 04833372 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 6: 088443c6 0f220010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 7: 08844382 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 8: 0000000e 00000000
>[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:01:00.0:   0: 0x00000040: type 0x40 idx 0 tag 0xff
>[drm] nouveau 0000:01:00.0:   1: 0x00000100: type 0x00 idx 1 tag 0xff
>[drm] nouveau 0000:01:00.0:   2: 0x00101246: type 0x46 idx 2 tag 0x07
>[drm] nouveau 0000:01:00.0:   3: 0x00202346: type 0x46 idx 3 tag 0x08
>[drm] nouveau 0000:01:00.0:   4: 0x00410446: type 0x46 idx 4 tag 0x51
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE39E
>usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>[drm] nouveau 0000:01:00.0: 0xE66B: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 0xE66F: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 0xE7F5: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE822
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF217
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF230
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF317
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF37C
>[drm] nouveau 0000:01:00.0: 0xE212: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 3 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: memory 135MHz core 135MHz shader 270MHz voltage 850mV
>[drm] nouveau 0000:01:00.0: 1: memory 405MHz core 405MHz shader 810MHz voltage 850mV
>[drm] nouveau 0000:01:00.0: 3: memory 810MHz core 606MHz shader 1468MHz voltage 1000mV
>[drm] nouveau 0000:01:00.0: c: memory 950MHz core 550MHz shader 200MHz
>[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
>[TTM] Zone  kernel: Available graphics memory: 432622 kiB.
>[TTM] Zone highmem: Available graphics memory: 2004494 kiB.
>[TTM] Initializing pool allocator.
>usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>usb 1-1.3: new full speed USB device using ehci_hcd and address 3
>usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
>usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.3: Product: Biometric Coprocessor
>usb 1-1.3: Manufacturer: UPEK
>usb 1-1.3: configuration #1 chosen from 1 choice
>usb 1-1.4: new full speed USB device using ehci_hcd and address 4
>usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.4: Product: Broadcom Bluetooth Device
>usb 1-1.4: Manufacturer: Broadcom Corp
>usb 1-1.4: SerialNumber: 904CE5E4D101
>usb 1-1.4: configuration #1 chosen from 1 choice
>usb 1-1.6: new high speed USB device using ehci_hcd and address 5
>usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f
>usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.6: Product: Integrated Camera
>usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
>usb 1-1.6: configuration #1 chosen from 1 choice
>[drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
>[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x401d0000, bo c1500000
>fbcon: nouveaufb (fb0) is primary device
>Console: switching to colour frame buffer device 180x56
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>  alloc irq_desc for 28 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 28
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 28
>ata3: DUMMY
>ata4: DUMMY
>ata5: DUMMY
>ata6: DUMMY
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>psmouse serio2: ID: 10 00 64
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: ATA-8: ST9250411AS, 0003LVM3, max UDMA/100
>ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: configured for UDMA/100
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: configured for UDMA/100
>ata1: EH complete
>scsi 0:0:0:0: Direct-Access     ATA      ST9250411AS      0003 PQ: 0 ANSI: 5
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
>ata2.00: ATAPI: MATSHITADVD-RAM UJ892, SB01, max UDMA/100, ATAPI AN
>ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ892    SB01 PQ: 0 ANSI: 5
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1)
>sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:0d:00.0: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: [sda] Attached SCSI disk
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
>dracut: Scanning devices sda2  for LVM logical volumes BVG/61 
>dracut: inactive '/dev/BVG/HOME' [146.50 GiB] inherit
>dracut: inactive '/dev/BVG/56' [2.91 GiB] inherit
>dracut: inactive '/dev/BVG/61' [4.00 GiB] inherit
>dracut: inactive '/dev/BVG/SWAP' [4.00 GiB] inherit
>dracut: inactive '/dev/BVG/61usr' [12.56 GiB] inherit
>dracut: inactive '/dev/BVG/60' [5.78 GiB] inherit
>EXT4-fs (dm-0): INFO: recovery required on readonly filesystem
>EXT4-fs (dm-0): write access will be enabled during recovery
>EXT4-fs (dm-0): orphan cleanup on readonly fs
>EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 411
>EXT4-fs (dm-0): ext4_orphan_cleanup: deleting unreferenced inode 1031
>EXT4-fs (dm-0): 2 orphan inodes deleted
>EXT4-fs (dm-0): recovery complete
>EXT4-fs (dm-0): mounted filesystem with ordered data mode
>dracut: Mounted root filesystem /dev/mapper/BVG-61
>dracut: Loading SELinux policy
>type=1404 audit(1308751485.084:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 211951 rules.
>SELinux: 2048 avtab hash slots, 211951 rules.
>SELinux:  9 users, 13 roles, 3426 types, 178 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 211951 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1308751485.663:3): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>udev: starting version 147
>e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
>e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>  alloc irq_desc for 29 on node -1
>  alloc kstat_irqs on node -1
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:2d:f2:5e:36
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>  alloc irq_desc for 30 on node -1
>  alloc kstat_irqs on node -1
>HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda-intel: Detected LENOVO ThinkPad T410/T510 system and NVidia PCI HDMI device.
>hda-intel: Device is not activated. Use probe_mask=0xff to manually enable.
>HDA Intel: probe of 0000:01:00.1 failed with error -2
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
>intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
>intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f)
>input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v1.0.0)
>microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
>platform microcode: firmware: requesting intel-ucode/06-25-02
>microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
>platform microcode: firmware: requesting intel-ucode/06-25-02
>microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
>platform microcode: firmware: requesting intel-ucode/06-25-02
>microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
>platform microcode: firmware: requesting intel-ucode/06-25-02
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>microcode: CPU0 updated to revision 0xc, date = 2010-06-10 
>microcode: CPU1 updated to revision 0xc, date = 2010-06-10 
>microcode: CPU2 updated to revision 0xc, date = 2010-06-10 
>microcode: CPU3 updated to revision 0xc, date = 2010-06-10 
>cfg80211: Calling CRDA to update world regulatory domain
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>iwlagn: Copyright(c) 2003-2010 Intel Corporation
>iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:03:00.0: setting latency timer to 64
>iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
>iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
>iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>  alloc irq_desc for 31 on node -1
>  alloc kstat_irqs on node -1
>iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X
>iwlagn 0000:03:00.0: firmware: requesting iwlwifi-6000-4.ucode
>iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
>ACPI: WMI: Mapper loaded
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>cfg80211: World regulatory domain updated:
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>thinkpad_acpi: ThinkPad ACPI Extras v0.23
>thinkpad_acpi: http://ibm-acpi.sf.net/
>thinkpad_acpi: ThinkPad BIOS 6IET65WW (1.25 ), EC 6IHT35WW-1.10
>thinkpad_acpi: Lenovo ThinkPad T410, model 25223FG
>thinkpad_acpi: radio switch found; radios are enabled
>thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>Registered led device: tpacpi::thinklight
>Registered led device: tpacpi::power
>Registered led device: tpacpi::standby
>Registered led device: tpacpi::thinkvantage
>thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
>input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
>padlock: VIA PadLock not detected.
>EXT4-fs (dm-4): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-4, type ext4), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (sda1): using internal journal
>EXT3-fs (sda1): mounted filesystem with ordered data mode
>SELinux: initialized (dev sda1, type ext3), uses xattr
>EXT4-fs (dm-6): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-6, type ext4), uses xattr
>Adding 4194296k swap on /dev/mapper/BVG-SWAP.  Priority:-1 extents:1 across:4194296k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>device virbr0-nic entered promiscuous mode
>virbr0: starting userspace STP failed, starting kernel STP
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>lo: Disabled Privacy Extensions
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>fuse init (API version 7.13)
>usb 1-1.4: USB disconnect, address 4
>btusb_intr_complete: hci0 urb ea9d5a40 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ea9d5740 failed to resubmit (19)
>btusb_bulk_complete: hci0 urb ea9d58c0 failed to resubmit (19)
>btusb_send_frame: hci0 urb ea9d58c0 submission failed
>Broke affinity for irq 25
>CPU 1 is now offline
>Broke affinity for irq 27
>CPU 3 is now offline
>PM: Syncing filesystems ... done.
>Freezing user space processes ... (elapsed 0.00 seconds) done.
>Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
>Suspending console(s) (use no_console_suspend to debug)
>sd 0:0:0:0: [sda] Synchronizing SCSI cache
>sd 0:0:0:0: [sda] Stopping disk
>ACPI handle has no context!
>sdhci-pci 0000:0d:00.0: PCI INT A disabled
>ACPI handle has no context!
>[drm] nouveau 0000:01:00.0: Disabling fbcon acceleration...
>[drm] nouveau 0000:01:00.0: Unpinning framebuffer(s)...
>[drm] nouveau 0000:01:00.0: Evicting buffers...
>[drm] nouveau 0000:01:00.0: Idling channels...
>[drm] nouveau 0000:01:00.0: Suspending GPU objects...
>[drm] nouveau 0000:01:00.0: And we're gone!
>nouveau 0000:01:00.0: PCI INT A disabled
>nouveau 0000:01:00.0: power state changed by ACPI to D3
>ehci_hcd 0000:00:1d.0: PCI INT D disabled
>HDA Intel 0000:00:1b.0: PCI INT B disabled
>ehci_hcd 0000:00:1a.0: PCI INT D disabled
>e1000e 0000:00:19.0: PCI INT A disabled
>e1000e 0000:00:19.0: PME# enabled
>e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>ACPI handle has no context!
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
>ACPI: Preparing to enter system sleep state S3
>Disabling non-boot CPUs ...
>Broke affinity for irq 9
>Broke affinity for irq 19
>Broke affinity for irq 23
>Broke affinity for irq 26
>CPU 2 is now offline
>SMP alternatives: switching to UP code
>Extended CMOS year: 2000
>Back to C!
>microcode: CPU0 updated to revision 0xc, date = 2010-06-10 
>Extended CMOS year: 2000
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting Node 0 Processor 2 APIC 0x4
>Initializing CPU#2
>microcode: CPU2 updated to revision 0xc, date = 2010-06-10 
>hpet: hpet3 irq 25 for MSI
>CPU2 is up
>ACPI: Waking up from system sleep state S3
>thinkpad_acpi: EC reports that Thermal Table has changed
>ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
>ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000)
>ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
>pci 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x40107)
>pci 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>pci 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210)
>pci 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
>pci 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
>pci 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
>ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x406)
>ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400)
>ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x406)
>intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>e1000e 0000:00:19.0: PME# disabled
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
>pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.4: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>ahci 0000:00:1f.2: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: We're back, enabling device...
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: power state changed by ACPI to D0
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: POSTing device...
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE39E
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE822
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF217
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF230
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF317
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF37C
>[drm] nouveau 0000:01:00.0: Reinitialising engines...
>[drm] nouveau 0000:01:00.0: Restoring GPU objects...
>[drm] nouveau 0000:01:00.0: Restoring mode...
>sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:79:00:00:00:a0 (IDLE) succeeded
>ata2.00: ACPI cmd e3/00:01:00:00:00:a0 (IDLE) succeeded
>ata2.00: configured for UDMA/100
>sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>sdhci-pci 0000:0d:00.0: setting latency timer to 64
>sd 0:0:0:0: [sda] Starting disk
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: configured for UDMA/100
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: supports DRM functions and may not be fully accessable.
>ata1.00: configured for UDMA/100
>ata1: EH complete
>Restarting tasks ... done.
>video LNXVIDEO:01: Restoring backlight state
>Booting Node 0 Processor 1 APIC 0x1
>Initializing CPU#1
>usb 1-1.3: reset full speed USB device using ehci_hcd and address 3
>usb 1-1.5: new high speed USB device using ehci_hcd and address 6
>microcode: CPU1 sig=0x20652, pf=0x10, revision=0xc
>platform microcode: firmware: requesting intel-ucode/06-25-02
>hpet: hpet4 irq 26 for MSI
>Booting Node 0 Processor 3 APIC 0x5
>usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
>usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1.5: configuration #1 chosen from 1 choice
>hub 1-1.5:1.0: USB hub found
>hub 1-1.5:1.0: 6 ports detected
>Initializing CPU#3
>usb 1-1.6: reset high speed USB device using ehci_hcd and address 5
>microcode: CPU3 sig=0x20652, pf=0x10, revision=0xc
>platform microcode: firmware: requesting intel-ucode/06-25-02
>hpet: hpet5 irq 27 for MSI
>usb 1-1.5.3: new low speed USB device using ehci_hcd and address 7
>usb 1-1.5.3: New USB device found, idVendor=413c, idProduct=2003
>usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.5.3: Product: Dell USB Keyboard
>usb 1-1.5.3: Manufacturer: Dell
>usb 1-1.5.3: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input10
>generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1.5.3/input0
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>usb 1-1.5.4: new low speed USB device using ehci_hcd and address 8
>e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 1-1.5.4: New USB device found, idVendor=046d, idProduct=c069
>usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.5.4: Product: USB Laser Mouse
>usb 1-1.5.4: Manufacturer: Logitech
>usb 1-1.5.4: configuration #1 chosen from 1 choice
>input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/input/input11
>generic-usb 0003:046D:C069.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.0-1.5.4/input0
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>usb 1-1.4: new full speed USB device using ehci_hcd and address 9
>usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.4: Product: Broadcom Bluetooth Device
>usb 1-1.4: Manufacturer: Broadcom Corp
>usb 1-1.4: SerialNumber: 904CE5E4D101
>usb 1-1.4: configuration #1 chosen from 1 choice
>wlan0: deauthenticating from 00:3a:98:7d:27:32 by local choice (reason=3)
>wlan0: direct probe to AP 00:3a:98:78:3c:42 (try 1)
>wlan0: direct probe responded
>wlan0: authenticate with AP 00:3a:98:78:3c:42 (try 1)
>wlan0: authenticated
>wlan0: associate with AP 00:3a:98:78:3c:42 (try 1)
>wlan0: RX AssocResp from 00:3a:98:78:3c:42 (capab=0x431 status=0 aid=2)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>cfg80211: Calling CRDA for country: CZ
>cfg80211: Current regulatory domain updated by AP to: CZ
>	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>	(2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 692372: 505664 | 505987 | 505988 | 505989