Attachment 576152 Details for Bug 807998 – Output of dmesg after pm-suspend command

Output of dmesg after pm-suspend command

dmesg.txt (text/plain), 9.61 KB, created by jepege on 2012-04-09 09:43:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jepege

Created: 2012-04-09 09:43:09 UTC

Size: 9.61 KB

patch

obsolete

>[208614.395034] PM: Finishing wakeup.
>[208620.784139] e1000e: eth0 NIC Link is Down
>[208623.688945] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[208624.523140] Restarting tasks ... done.
>[211318.857555] PM: Syncing filesystems ... done.
>[211318.862447] PM: Preparing system for mem sleep
>[211318.862500] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[211329.022392] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[211329.033034] PM: Entering mem sleep
>[211329.033078] Suspending console(s) (use no_console_suspend to debug)
>[211329.033312] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[211329.067872] hpet1: lost 1 rtc interrupts
>[211329.068920] ACPI handle has no context!
>[211329.092404] sd 0:0:0:0: [sda] Stopping disk
>[211329.296467]  pci0000:00: wake-up capability enabled by ACPI
>[211329.307051] PM: suspend of devices complete after 273.813 msecs
>[211329.307208]  pci0000:00: wake-up capability enabled by ACPI
>[211329.318047] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[211329.318072] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[211329.318098] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[211329.318155]  pci0000:00: wake-up capability enabled by ACPI
>[211329.329046] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[211329.329071] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[211329.329134] PM: late suspend of devices complete after 22.079 msecs
>[211329.329543] ACPI: Preparing to enter system sleep state S3
>[211329.331115] PM: Saving platform NVS memory
>[211329.331592] Disabling non-boot CPUs ...
>[211329.332847] CPU 1 is now offline
>[211329.333249] ACPI: Low-level resume complete
>[211329.333249] PM: Restoring platform NVS memory
>[211329.333249] Enabling non-boot CPUs ...
>[211329.333249] Booting Node 0 Processor 1 APIC 0x1
>[211329.333249] smpboot cpu 1: start_ip = 9b000
>[211329.332774] Initializing CPU#1
>[211329.332774] Calibrating delay loop (skipped) already calibrated this CPU
>[211329.364705] NMI watchdog enabled, takes one hw-pmu counter.
>[211329.366028] CPU1 is up
>[211329.367921] ACPI: Waking up from system sleep state S3
>[211329.390333] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[211329.390363] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[211329.390403]  pci0000:00: wake-up capability disabled by ACPI
>[211329.390476] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[211329.390504] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[211329.390532] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[211329.390571]  pci0000:00: wake-up capability disabled by ACPI
>[211329.390775] PM: early resume of devices complete after 0.646 msecs
>[211329.390824] i915 0000:00:02.0: setting latency timer to 64
>[211329.390909] ata_generic 0000:00:03.2: setting latency timer to 64
>[211329.390920]  pci0000:00: wake-up capability disabled by ACPI
>[211329.390977] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[211329.396112] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[211329.396133] usb usb3: root hub lost power or was reset
>[211329.396142] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[211329.396162] usb usb4: root hub lost power or was reset
>[211329.396171] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[211329.396194] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[211329.396214] usb usb5: root hub lost power or was reset
>[211329.396222] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[211329.396241] usb usb6: root hub lost power or was reset
>[211329.396249] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[211329.396268] usb usb7: root hub lost power or was reset
>[211329.396277] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[211329.396297] pci 0000:00:1e.0: setting latency timer to 64
>[211329.396307] ata_piix 0000:00:1f.2: setting latency timer to 64
>[211329.396316] ata_piix 0000:00:1f.5: setting latency timer to 64
>[211329.525832] e1000e 0000:00:19.0: eth0: MAC Wakeup cause - Magic Packet
>[211329.711669] ata3: SATA link down (SStatus 4 SControl 300)
>[211329.711721] ata4: SATA link down (SStatus 4 SControl 300)
>[211330.215080] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[211330.215093] ata2.01: SATA link down (SStatus 4 SControl 300)
>[211330.215103] ata2.01: link offline, clearing class 3 to NONE
>[211330.224126] ata2.00: configured for UDMA/100
>[211331.609932] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[211333.125103] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[211333.125114] ata1.01: SATA link down (SStatus 4 SControl 300)
>[211333.131230] ata1.00: configured for UDMA/133
>[211333.131261] sd 0:0:0:0: [sda] Starting disk
>[211333.166641] PM: resume of devices complete after 3775.838 msecs
>[211333.188040] PM: Finishing wakeup.
>[211339.564158] e1000e: eth0 NIC Link is Down
>[211340.939895] Restarting tasks ... done.
>[211342.468894] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[214010.295954] PM: Syncing filesystems ... done.
>[214010.300846] PM: Preparing system for mem sleep
>[214010.300899] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[214020.453713] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[214020.464034] PM: Entering mem sleep
>[214020.464078] Suspending console(s) (use no_console_suspend to debug)
>[214020.464353] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[214020.498918] hpet1: lost 1 rtc interrupts
>[214020.499911] ACPI handle has no context!
>[214020.528094] sd 0:0:0:0: [sda] Stopping disk
>[214020.726445]  pci0000:00: wake-up capability enabled by ACPI
>[214020.737049] PM: suspend of devices complete after 272.810 msecs
>[214020.737207]  pci0000:00: wake-up capability enabled by ACPI
>[214020.748047] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[214020.748073] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[214020.748098] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[214020.748155]  pci0000:00: wake-up capability enabled by ACPI
>[214020.759045] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[214020.759070] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[214020.759132] PM: late suspend of devices complete after 22.079 msecs
>[214020.759540] ACPI: Preparing to enter system sleep state S3
>[214020.761112] PM: Saving platform NVS memory
>[214020.761599] Disabling non-boot CPUs ...
>[214020.762845] CPU 1 is now offline
>[214020.763237] ACPI: Low-level resume complete
>[214020.763237] PM: Restoring platform NVS memory
>[214020.763237] Enabling non-boot CPUs ...
>[214020.763237] Booting Node 0 Processor 1 APIC 0x1
>[214020.763237] smpboot cpu 1: start_ip = 9b000
>[214020.762771] Initializing CPU#1
>[214020.762771] Calibrating delay loop (skipped) already calibrated this CPU
>[214020.794694] NMI watchdog enabled, takes one hw-pmu counter.
>[214020.796028] CPU1 is up
>[214020.797923] ACPI: Waking up from system sleep state S3
>[214020.820428] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[214020.820458] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[214020.820498]  pci0000:00: wake-up capability disabled by ACPI
>[214020.820571] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[214020.820599] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[214020.820626] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[214020.820666]  pci0000:00: wake-up capability disabled by ACPI
>[214020.820870] PM: early resume of devices complete after 0.645 msecs
>[214020.820919] i915 0000:00:02.0: setting latency timer to 64
>[214020.820962] ata_generic 0000:00:03.2: setting latency timer to 64
>[214020.820973]  pci0000:00: wake-up capability disabled by ACPI
>[214020.821037] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[214020.826202] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[214020.826223] usb usb3: root hub lost power or was reset
>[214020.826232] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[214020.826251] usb usb4: root hub lost power or was reset
>[214020.826261] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[214020.826282] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[214020.826301] usb usb5: root hub lost power or was reset
>[214020.826309] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[214020.826328] usb usb6: root hub lost power or was reset
>[214020.826336] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[214020.826355] usb usb7: root hub lost power or was reset
>[214020.826365] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[214020.826384] pci 0000:00:1e.0: setting latency timer to 64
>[214020.826394] ata_piix 0000:00:1f.2: setting latency timer to 64
>[214020.826403] ata_piix 0000:00:1f.5: setting latency timer to 64
>[214020.955821] e1000e 0000:00:19.0: eth0: MAC Wakeup cause - Magic Packet
>[214021.132068] ata4: SATA link down (SStatus 4 SControl 300)
>[214021.143684] ata3: SATA link down (SStatus 4 SControl 300)
>[214021.648077] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[214021.648090] ata2.01: SATA link down (SStatus 4 SControl 300)
>[214021.648100] ata2.01: link offline, clearing class 3 to NONE
>[214021.657137] ata2.00: configured for UDMA/100
>[214023.118865] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[214024.494104] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[214024.494114] ata1.01: SATA link down (SStatus 4 SControl 300)
>[214024.500237] ata1.00: configured for UDMA/133
>[214024.500258] sd 0:0:0:0: [sda] Starting disk
>[214024.535642] PM: resume of devices complete after 3714.744 msecs
>[214024.557033] PM: Finishing wakeup.
>[214030.963156] e1000e: eth0 NIC Link is Down
>[214033.795939] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[214034.718141] Restarting tasks ... done.

Actions: View

Attachments on bug 807998: 576152