Attachment 578553 Details for Bug 814110 – dmesg on old packages

dmesg on old packages

old.dmesg (text/plain), 44.62 KB, created by Tomas Pelka on 2012-04-19 09:25:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tomas Pelka

Created: 2012-04-19 09:25:41 UTC

Size: 44.62 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-220.el6.x86_64 (mockbuild@x86-004.build.bos.redhat.com) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011
>Command line: ro root=UUID=9b121955-0128-4149-a6a0-0cadb764525d rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000eefc1da0 (usable)
> BIOS-e820: 00000000eefc1da0 - 00000000eefc1e00 (ACPI NVS)
> BIOS-e820: 00000000eefc1e00 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
> BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000110000000 (usable)
>DMI 2.6 present.
>SMBIOS version 2.6 @ 0xF9C00
>DMI: Hewlett-Packard HP xw4600 Workstation/0AA0h, BIOS 786F3 v01.15 08/28/2008
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x110000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-E3FFF write-protect
>  E4000-EFFFF write-back
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 0F0000000 mask FF0000000 uncachable
>  2 base 110000000 mask FF0000000 uncachable
>  3 base 100000000 mask FE0000000 write-back
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 3840MB, range: 256MB, type UC
>reg 2, base: 4352MB, range: 256MB, type UC
>reg 3, base: 4GB, range: 512MB, type WB
>total RAM covered: 4096M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 512M 	num_reg: 3  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 3840MB, range: 256MB, type UC
>reg 2, base: 4GB, range: 256MB, type WB
>e820 update range: 00000000f0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xeefc1 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000eefc1000
> 0000000000 - 00eee00000 page 2M
> 00eee00000 - 00eefc1000 page 4k
>kernel direct mapping tables up to eefc1000 @ 8000-e000
>init_memory_mapping: 0000000100000000-0000000110000000
> 0100000000 - 0110000000 page 2M
>kernel direct mapping tables up to 110000000 @ c000-12000
>RAMDISK: 370cf000 - 37fef421
>ACPI: RSDP 00000000000e6410 00024 (v02 COMPAQ)
>ACPI: XSDT 00000000eefc1ee8 0005C (v01 HPQOEM SLIC-WKS 20080828      00000000)
>ACPI: FACP 00000000eefc2088 000F4 (v03 COMPAQ          EEFC2647      00000000)
>ACPI Error: 32/64X address mismatch in Gpe0Block: 0000F820/000000000001F028, using 32 (20090903/tbfadt-427)
>ACPI: DSDT 00000000eefc2647 098EC (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
>ACPI: FACS 00000000eefc1e00 00040
>ACPI: APIC 00000000eefc217c 00084 (v01 COMPAQ BEARLX38 00000001      00000000)
>ACPI: ASF! 00000000eefc2200 00063 (v32 COMPAQ BEARLX38 00000001      00000000)
>ACPI: MCFG 00000000eefc2263 0003C (v01 COMPAQ BEARLX38 00000001      00000000)
>ACPI: TCPA 00000000eefc229f 00032 (v01 COMPAQ BEARLX38 00000001      00000000)
>ACPI: HPET 00000000eefc2447 00038 (v01 COMPAQ BEARLX38 00000001      00000000)
>ACPI: DMAR 00000000eefc247f 00158 (v01 COMPAQ BEARLX38 00000001      00000000)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000110000000
>Bootmem setup node 0 0000000000000000-0000000110000000
>  NODE_DATA [000000000000d000 - 0000000000040fff]
>  bootmap [0000000000041000 -  0000000000062fff] pages 22
>(8 early reservations) ==> bootmem [0000000000 - 0110000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 000200c7e4]    TEXT DATA BSS ==> [0001000000 - 000200c7e4]
>  #3 [00370cf000 - 0037fef421]          RAMDISK ==> [00370cf000 - 0037fef421]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [000200d000 - 000200d140]              BRK ==> [000200d000 - 000200d140]
>  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
>  #7 [000000c000 - 000000d000]          PGTABLE ==> [000000c000 - 000000d000]
>found SMP MP-table at [ffff8800000f9bf0] f9bf0
>Reserving 129MB of memory at 48MB for crashkernel (System RAM: 4352MB)
> [ffffea0000000000-ffffea0003bfffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00110000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000001 -> 0x0000009f
>    0: 0x00000100 -> 0x000eefc1
>    0: 0x00100000 -> 0x00110000
>On node 0 totalpages: 1044319
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3838 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 960505 pages, LIFO batch:31
>  Normal zone: 896 pages used for memmap
>  Normal zone: 64640 pages, LIFO batch:15
>ACPI: PM-Timer IO Port: 0xf808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
>PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
>PM: Registered nosave memory: 00000000eefc1000 - 00000000eefc2000
>PM: Registered nosave memory: 00000000eefc1000 - 00000000eefc2000
>PM: Registered nosave memory: 00000000eefc2000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
>PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fed40000
>PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
>PM: Registered nosave memory: 00000000fed45000 - 0000000100000000
>Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 30 pages/cpu @ffff880028200000 s92696 r8192 d21992 u524288
>pcpu-alloc: s92696 r8192 d21992 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1028983
>Policy zone: Normal
>Kernel command line: ro root=UUID=9b121955-0128-4149-a6a0-0cadb764525d rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD quiet SYSFONT=latarcyrheb-sun16 rhgb crashkernel=129M@0M  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
>Checking aperture...
>No AGP bridge found
>------------[ cut here ]------------
>WARNING: at drivers/pci/dmar.c:594 warn_invalid_dmar+0x7a/0x90() (Not tainted)
>Hardware name: HP xw4600 Workstation
>[Firmware Warn]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
>BIOS vendor: Hewlett-Packard; Ver: 786F3 v01.15; Product Version:  
>Modules linked in:
>Pid: 0, comm: swapper Not tainted 2.6.32-220.el6.x86_64 #1
>Call Trace:
> [<ffffffff81069b77>] ? warn_slowpath_common+0x87/0xc0
> [<ffffffff81069c0f>] ? warn_slowpath_fmt_taint+0x3f/0x50
> [<ffffffff8103814d>] ? native_set_pte_at+0xd/0x40
> [<ffffffff81037af9>] ? native_flush_tlb_single+0x9/0x10
> [<ffffffff8129f7ca>] ? warn_invalid_dmar+0x7a/0x90
> [<ffffffff81c4ec32>] ? check_zero_address+0xd6/0x118
> [<ffffffff812e5f9b>] ? acpi_get_table_with_size+0x5a/0xb4
> [<ffffffff814f7215>] ? _etext+0x0/0x3
> [<ffffffff81c4ec86>] ? detect_intel_iommu+0x12/0x91
> [<ffffffff81c28118>] ? pci_iommu_alloc+0x5e/0x6c
> [<ffffffff81c3aa22>] ? mem_init+0x19/0xec
> [<ffffffff81c1fd73>] ? start_kernel+0x221/0x430
> [<ffffffff81c1f33a>] ? x86_64_start_reservations+0x125/0x129
> [<ffffffff81c1f438>] ? x86_64_start_kernel+0xfa/0x109
>---[ end trace a7919e7f17c0a725 ]---
>Disabling lock debugging due to kernel taint
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 3886812k/4456448k available (5084k kernel code, 279172k absent, 290464k reserved, 7229k data, 1244k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:440
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 33554432 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2833.759 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5667.51 BogoMIPS (lpj=2833759)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20776 entries in 82 pages
>DMAR: Host address width 36
>DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>------------[ cut here ]------------
>WARNING: at drivers/pci/dmar.c:594 warn_invalid_dmar+0x7a/0x90() (Tainted: G          I----------------  )
>Hardware name: HP xw4600 Workstation
>[Firmware Warn]: Your BIOS is broken; DMAR reported at address fed90000 returns all ones!
>BIOS vendor: Hewlett-Packard; Ver: 786F3 v01.15; Product Version:  
>Modules linked in:
>Pid: 1, comm: swapper Tainted: G          I----------------   2.6.32-220.el6.x86_64 #1
>Call Trace:
> [<ffffffff81069b77>] ? warn_slowpath_common+0x87/0xc0
> [<ffffffff81069c0f>] ? warn_slowpath_fmt_taint+0x3f/0x50
> [<ffffffff81043128>] ? __ioremap_caller+0x2a8/0x390
> [<ffffffff8129f7ca>] ? warn_invalid_dmar+0x7a/0x90
> [<ffffffff8129f9e3>] ? alloc_iommu+0x203/0x2b0
> [<ffffffff81c4f271>] ? dmar_table_init+0x1bd/0x3be
> [<ffffffff81c30285>] ? enable_IR_x2apic+0x23/0x221
> [<ffffffff81c2e189>] ? native_smp_prepare_cpus+0x143/0x389
> [<ffffffff81c1f740>] ? kernel_init+0x112/0x2f9
> [<ffffffff8100c14a>] ? child_rip+0xa/0x20
> [<ffffffff81c1f62e>] ? kernel_init+0x0/0x2f9
> [<ffffffff8100c140>] ? child_rip+0x0/0x20
>---[ end trace a7919e7f17c0a726 ]---
>DMAR: parse DMAR table failure.
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz stepping 0a
>Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1 #2 #3 Ok.
>Brought up 4 CPUs
>Total of 4 processors activated (22667.45 BogoMIPS).
>sizeof(vma)=200 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=592 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2616 bytes
>devtmpfs: initialized
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
>PCI: MCFG area at f4000000 reserved in E820
>PCI: Using MMCONFIG at f4000000 - f7ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88010d727808), AE_ALREADY_EXISTS
>ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0x2100-0x211f]
>pci 0000:00:1a.1: reg 20 io port: [0x2120-0x213f]
>pci 0000:00:1a.2: reg 20 io port: [0x2140-0x215f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3104800-0xf3104bff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3100000-0xf3103fff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0x2160-0x217f]
>pci 0000:00:1d.1: reg 20 io port: [0x2180-0x219f]
>pci 0000:00:1d.2: reg 20 io port: [0x21a0-0x21bf]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3104c00-0xf3104fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0400 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0480 (mask 000f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0cb0 (mask 000f)
>pci 0000:00:1f.2: reg 10 io port: [0x2200-0x2207]
>pci 0000:00:1f.2: reg 14 io port: [0x2210-0x2213]
>pci 0000:00:1f.2: reg 18 io port: [0x2208-0x220f]
>pci 0000:00:1f.2: reg 1c io port: [0x2214-0x2217]
>pci 0000:00:1f.2: reg 20 io port: [0x21c0-0x21df]
>pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3104000-0xf31047ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
>pci 0000:01:00.0: reg 14 64bit mmio pref: [0xf8000000-0xfbffffff]
>pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff]
>pci 0000:01:00.0: reg 24 io port: [0x1100-0x117f]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
>pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xf8000000-0xfbffffff]
>pci 0000:34:00.0: reg 10 64bit mmio: [0xf3000000-0xf300ffff]
>pci 0000:34:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
>pci 0000:34:00.0: PME# supported from D3hot D3cold
>pci 0000:34:00.0: PME# disabled
>pci 0000:00:1c.4: bridge 32bit mmio: [0xf3000000-0xf30fffff]
>pci 0000:10:0b.0: reg 10 32bit mmio: [0xf3200000-0xf3200fff]
>pci 0000:10:0b.0: supports D1 D2
>pci 0000:10:0b.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:10:0b.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge 32bit mmio: [0xf3200000-0xf32fffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88010d727808), AE_ALREADY_EXISTS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88010d727808), AE_ALREADY_EXISTS
>ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:0d: io resource (0xf800-0xf81f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
>pnp 00:0d: io resource (0xf820-0xf83f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
>pnp 00:0d: io resource (0xf840-0xf85f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
>pnp 00:0d: io resource (0xf860-0xf87f) overlaps 0000:00:1f.0 BAR 13 (0xf800-0xf87f), disabling
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:0d: ioport range 0x400-0x41f has been reserved
>system 00:0d: ioport range 0x420-0x43f has been reserved
>system 00:0d: ioport range 0x440-0x45f has been reserved
>system 00:0d: ioport range 0x460-0x47f has been reserved
>system 00:0d: ioport range 0x480-0x48f has been reserved
>system 00:0d: ioport range 0xfa00-0xfa3f has been reserved
>system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
>system 00:0d: ioport range 0xfc80-0xfcff has been reserved
>system 00:0d: ioport range 0xfe00-0xfe7f has been reserved
>system 00:0d: ioport range 0xfe80-0xfeff has been reserved
>system 00:0e: ioport range 0x4d0-0x4d1 has been reserved
>system 00:0e: ioport range 0xcb0-0xcbf has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0x100000-0xefffffff could not be reserved
>system 00:0f: iomem range 0xe4000-0xfffff could not be reserved
>system 00:0f: iomem range 0xfec01000-0xfecfffff has been reserved
>system 00:0f: iomem range 0xfed00400-0xfed3ffff has been reserved
>system 00:0f: iomem range 0xfed40000-0xffffffff could not be reserved
>system 00:0f: iomem range 0xf4000000-0xf7ffffff has been reserved
>system 00:0f: iomem range 0xd1200-0xe3fff has been reserved
>pci 0000:01:00.0: BAR 6: can't allocate mem resource [0x000000-0x01ffff]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   bridge window [0x1000-0x1fff]
>pci 0000:00:01.0:   bridge window [0xf0000000-0xf2ffffff]
>pci 0000:00:01.0:   bridge window [0xf8000000-0xfbffffff]
>pci 0000:00:1c.0: PCI bridge to [bus 28-28]
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:28
>pci 0000:00:1c.0:   bridge window [0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [0xfc000000-0xfc1fffff]
>pci 0000:00:1c.0:   bridge window [0xfc200000-0xfc3fffff]
>pci 0000:00:1c.4: PCI bridge to [bus 34-34]
>pci 0000:00:1c.4: PCI bridge, secondary bus 0000:34
>pci 0000:00:1c.4:   bridge window [0x4000-0x4fff]
>pci 0000:00:1c.4:   bridge window [0xf3000000-0xf30fffff]
>pci 0000:00:1c.4:   bridge window [0xfc400000-0xfc5fffff]
>pci 0000:00:1c.5: PCI bridge to [bus 3f-3f]
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:3f
>pci 0000:00:1c.5:   bridge window [0x5000-0x5fff]
>pci 0000:00:1c.5:   bridge window [0xfc600000-0xfc7fffff]
>pci 0000:00:1c.5:   bridge window [0xfc800000-0xfc9fffff]
>pci 0000:00:1e.0: PCI bridge to [bus 10-10]
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:10
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [0xf3200000-0xf32fffff]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>  alloc irq_desc for 16 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 20 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>pci 0000:00:1c.4: setting latency timer to 64
>  alloc irq_desc for 21 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff]
>pci_bus 0000:01: resource 2 pref mem [0xf8000000-0xfbffffff]
>pci_bus 0000:28: resource 0 io:  [0x3000-0x3fff]
>pci_bus 0000:28: resource 1 mem: [0xfc000000-0xfc1fffff]
>pci_bus 0000:28: resource 2 pref mem [0xfc200000-0xfc3fffff]
>pci_bus 0000:34: resource 0 io:  [0x4000-0x4fff]
>pci_bus 0000:34: resource 1 mem: [0xf3000000-0xf30fffff]
>pci_bus 0000:34: resource 2 pref mem [0xfc400000-0xfc5fffff]
>pci_bus 0000:3f: resource 0 io:  [0x5000-0x5fff]
>pci_bus 0000:3f: resource 1 mem: [0xfc600000-0xfc7fffff]
>pci_bus 0000:3f: resource 2 pref mem [0xfc800000-0xfc9fffff]
>pci_bus 0000:10: resource 1 mem: [0xf3200000-0xf32fffff]
>pci_bus 0000:10: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:10: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 15489k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1334822344.521:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7621
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key 4BB1E63D18B42658
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 24 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 25 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>  alloc irq_desc for 26 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>  alloc irq_desc for 27 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: MWAIT substates: 0x22220
>intel_idle: does not run on family 6 model 23
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PBTN]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>ACPI: SSDT 00000000eefcd361 003AC (v01 COMPAQ  CPU_TM2 00000001 MSFT 0100000E)
>ACPI: SSDT 00000000eefcd1e5 0017C (v01 COMPAQ      CST 00000001 MSFT 0100000E)
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>processor LNXCPU:02: registered as cooling_device2
>processor LNXCPU:03: registered as cooling_device3
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 22 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf3104800
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf3104c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-220.el6.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 20, io base 0x00002100
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002120
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1a.1
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 22, io base 0x00002140
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1a.2
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00002160
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00002180
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: UHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb7: SerialNumber: 0000:00:1d.1
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x000021a0
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: UHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.32-220.el6.x86_64 uhci_hcd
>usb usb8: SerialNumber: 0000:00:1d.2
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:03: setting system clock to 2012-04-19 07:59:05 UTC (1334822345)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1244k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 1040k freed
>Freeing unused kernel memory: 1760k freed
>dracut: dracut-004-256.el6
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>dracut: rd_NO_LUKS: removing cryptoluks activation
>dracut: rd_NO_LVM: removing LVM activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>udev: starting version 147
>ACPI: WMI: Mapper loaded
>[drm] Initialized drm 1.1.0 20060810
>nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>nouveau 0000:01:00.0: setting latency timer to 64
>[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298e80a2)
>[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
>[drm] nouveau 0000:01:00.0: ... appears to be valid
>[drm] nouveau 0000:01:00.0: BIT BIOS found
>[drm] nouveau 0000:01:00.0: Bios version 62.98.75.00
>[drm] nouveau 0000:01:00.0: TMDS table version 2.0
>[drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
>[drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000386 0f200010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02000332 00020010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 2: 040113a6 0f200010
>[drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011342 00020010
>[drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
>[drm] nouveau 0000:01:00.0:   0: 0x00005046: type 0x46 idx 0 tag 0x07
>[drm] nouveau 0000:01:00.0:   1: 0x0000a146: type 0x46 idx 1 tag 0x08
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDB65
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDF6A
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE775
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE843
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEAF9
>[drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEB5E
>[drm] nouveau 0000:01:00.0: 0xEB5E: Condition still not met after 20ms, skipping following opcodes
>[drm] nouveau 0000:01:00.0: 4 available performance level(s)
>[drm] nouveau 0000:01:00.0: 0: memory 100MHz core 275MHz shader 550MHz voltage 900mV fanspeed 100% timing 0
>[drm] nouveau 0000:01:00.0: 1: memory 695MHz core 460MHz shader 920MHz voltage 900mV fanspeed 100% timing 1
>[drm] nouveau 0000:01:00.0: 2: memory 695MHz core 460MHz shader 920MHz voltage 900mV fanspeed 100% timing 1
>[drm] nouveau 0000:01:00.0: 3: memory 695MHz core 540MHz shader 1300MHz voltage 1100mV fanspeed 100% timing 1
>[drm] nouveau 0000:01:00.0: c: memory 702MHz core 540MHz shader 1300MHz
>[TTM] Zone  kernel: Available graphics memory: 1953174 kiB.
>[TTM] Initializing pool allocator.
>[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
>mtrr: type mismatch for f8000000,4000000 old: write-back new: write-combining
>[drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>usb 8-1: new low speed USB device using uhci_hcd and address 2
>[drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40000000, bo ffff8801082cd800
>fbcon: nouveaufb (fb0) is primary device
>Console: switching to colour frame buffer device 160x64
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>usb 8-1: New USB device found, idVendor=413c, idProduct=3012
>usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 8-1: Product: Dell USB Optical Mouse
>usb 8-1: Manufacturer: Dell
>usb 8-1: configuration #1 chosen from 1 choice
>input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input4
>generic-usb 0003:413C:3012.0001: input,hidraw0: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.2-1/input0
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>ahci 0000:00:1f.2: version 3.0
>  alloc irq_desc for 18 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>  alloc irq_desc for 28 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc sxs 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104100 irq 28
>ata2: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104180 irq 28
>ata3: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104200 irq 28
>ata4: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104280 irq 28
>ata5: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104300 irq 28
>ata6: SATA max UDMA/133 abar m2048@0xf3104000 port 0xf3104380 irq 28
>ata3: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2.00: ATAPI: ATAPI   DVD D  DH16D3S, SH37, max UDMA/100
>ata1.00: ATA-7: ST3250410AS, 3.AHC, max UDMA/100
>ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/100
>ata2.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      ST3250410AS      3.AH PQ: 0 ANSI: 5
>scsi 1:0:0:0: CD-ROM            ATAPI    DVD D  DH16D3S   SH37 PQ: 0 ANSI: 5
>firewire_ohci 0000:10:0b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>firewire_ohci: Added fw-ohci device 0000:10:0b.0, OHCI version 1.0
>sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
>dracut: Mounted root filesystem /dev/sda2
>dracut: Loading SELinux policy
>firewire_core: created device fw0: GUID 0030bd051505e113, S400
>type=1404 audit(1334822347.590:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 225596 rules.
>SELinux: 2048 avtab hash slots, 225596 rules.
>SELinux:  9 users, 12 roles, 3576 types, 179 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 225596 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1334822347.971:3): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>readahead-collector: starting
>udev: starting version 147
>EDAC MC: Ver: 2.1.0 Nov  9 2011
>EDAC MC0: Giving out device to 'x38_edac' 'x38': DEV 0000:00:00.0
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>  alloc irq_desc for 29 on node -1
>  alloc kstat_irqs on node -1
>HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC262: SKU not ready 0x411111f0
>input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>tg3.c:v3.119 (May 18, 2011)
>tg3 0000:34:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:34:00.0: setting latency timer to 64
>tg3 0000:34:00.0: eth0: Tigon3 [partno(BCM95751A519FLP) rev 4201] (PCI Express) MAC address 00:10:18:48:2a:95
>tg3 0000:34:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>tg3 0000:34:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:34:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0xf860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
>platform microcode: firmware: requesting intel-ucode/06-17-0a
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28 
>microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28 
>microcode: CPU2 updated to revision 0xa0b, date = 2010-09-28 
>microcode: CPU3 updated to revision 0xa0b, date = 2010-09-28 
>parport_pc 00:07: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ppdev: user-space parallel port driver
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
>SELinux: initialized (dev sda1, type ext4), uses xattr
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>readahead-disable-service: delaying service auditd
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>  alloc irq_desc for 30 on node -1
>  alloc kstat_irqs on node -1
>tg3 0000:34:00.0: irq 30 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3 0000:34:00.0: eth0: Link is up at 100 Mbps, full duplex
>tg3 0000:34:00.0: eth0: Flow control is off for TX and off for RX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>readahead-collector: starting delayed service auditd
>readahead-collector: sorting
>hda-intel: Invalid position buffer, using LPIB read method instead.
>hda-intel: Invalid position buffer, using LPIB read method instead.
>readahead-collector: finished
>hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
>fuse init (API version 7.13)

Actions: View

Attachments on bug 814110: 578551 | 578552 | 578553 | 578554