Attachment 579083 Details for Bug 814818 – dmesg

dmesg

dmesg (text/plain), 58.62 KB, created by Rik van Riel on 2012-04-20 18:55:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rik van Riel

Created: 2012-04-20 18:55:00 UTC

Size: 58.62 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-262.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Sun Apr 8 18:38:00 EDT 2012
>Command line: ro root=/dev/mapper/vg0-rhel6 rd_LVM_LV=vg0/rhel6 rd_LVM_LV=vg0/swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=dvorak crashkernel=auto rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000efe8cc00 (usable)
> BIOS-e820: 00000000efe8cc00 - 00000000efe8ec00 (ACPI NVS)
> BIOS-e820: 00000000efe8ec00 - 00000000efe90c00 (ACPI data)
> BIOS-e820: 00000000efe90c00 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>SMBIOS version 2.3 @ 0xF0430
>DMI: Dell Inc.                 Dell DXP051                  /0FJ030, BIOS A07 01/08/2007
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0xefe8c max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 0C0000000 mask FE0000000 write-back
>  3 base 0E0000000 mask FF0000000 write-back
>  4 base 0EFF00000 mask FFFF00000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 512MB, type WB
>reg 3, base: 3584MB, range: 256MB, type WB
>reg 4, base: 3839MB, range: 1MB, type UC
>total RAM covered: 3839M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 512M 	num_reg: 3  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 4GB, type WB
>reg 1, base: 3839MB, range: 1MB, type UC
>reg 2, base: 3840MB, range: 256MB, type UC
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000efe8c000
> 0000000000 - 00efe00000 page 2M
> 00efe00000 - 00efe8c000 page 4k
>kernel direct mapping tables up to efe8c000 @ 8000-e000
>RAMDISK: 370a8000 - 37fef97d
>ACPI: RSDP 00000000000feb00 00024 (v02 DELL  )
>ACPI: XSDT 00000000000fd25d 00074 (v01 DELL    DXP051  00000007 ASL  00000061)
>ACPI: FACP 00000000000fd355 000F4 (v03 DELL    DXP051  00000007 ASL  00000061)
>ACPI: DSDT 00000000fffc7cbd 032F4 (v01   DELL    dt_ex 00001000 INTL 20050309)
>ACPI: FACS 00000000efe8cc00 00040
>ACPI: SSDT 00000000fffcb0d2 000AC (v01   DELL    st_ex 00001000 INTL 20050309)
>ACPI: APIC 00000000000fd449 00072 (v01 DELL    DXP051  00000007 ASL  00000061)
>ACPI: BOOT 00000000000fd4bb 00028 (v01 DELL    DXP051  00000007 ASL  00000061)
>ACPI: ASF! 00000000000fd4e3 00067 (v16 DELL    DXP051  00000007 ASL  00000061)
>ACPI: MCFG 00000000000fd54a 0003E (v01 DELL    DXP051  00000007 ASL  00000061)
>ACPI: HPET 00000000000fd588 00038 (v01 DELL    DXP051  00000007 ASL  00000061)
>ACPI: SSDT 00000000efe8cc40 00175 (v01 DpgPmm  Cpu0Ist 00000011 INTL 20050309)
>ACPI: SSDT 00000000efe8d049 00175 (v01 DpgPmm  Cpu1Ist 00000011 INTL 20050309)
>ACPI: SSDT 00000000efe8d452 00140 (v01 DpgPmm    CpuPm 00000010 INTL 20050309)
>ACPI: Local APIC address 0xfee00000
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000efe8c000
>Bootmem setup node 0 0000000000000000-00000000efe8c000
>  NODE_DATA [000000000000c000 - 000000000003ffff]
>  bootmap [0000000000040000 -  000000000005dfd7] pages 1e
>(7 early reservations) ==> bootmem [0000000000 - 00efe8c000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0002011ce4]    TEXT DATA BSS ==> [0001000000 - 0002011ce4]
>  #3 [00370a8000 - 0037fef97d]          RAMDISK ==> [00370a8000 - 0037fef97d]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0002012000 - 00020121e4]              BRK ==> [0002012000 - 00020121e4]
>  #6 [0000008000 - 000000c000]          PGTABLE ==> [0000008000 - 000000c000]
>found SMP MP-table at [ffff8800000fe710] fe710
>Reserving 129MB of memory at 48MB for crashkernel (System RAM: 3838MB)
> [ffffea0000000000-ffffea00009fffff] PMD -> [ffff880002600000-ffff880002ffffff] on node 0
> [ffffea0000a00000-ffffea00035fffff] PMD -> [ffff88000b200000-ffff88000ddfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000001 -> 0x000000a0
>    0: 0x00000100 -> 0x000efe8c
>On node 0 totalpages: 982571
>  DMA zone: 56 pages used for memmap
>  DMA zone: 103 pages reserved
>  DMA zone: 3840 pages, LIFO batch:0
>  DMA32 zone: 13379 pages used for memmap
>  DMA32 zone: 965193 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at f4000000 (gap: f4000000:ac00000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94424 r8192 d24360 u524288
>pcpu-alloc: s94424 r8192 d24360 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 969033
>Policy zone: DMA32
>Kernel command line: ro root=/dev/mapper/vg0-rhel6 rd_LVM_LV=vg0/rhel6 rd_LVM_LV=vg0/swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=dvorak crashkernel=129M@0M rhgb quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Memory: 3709772k/3930672k available (5140k kernel code, 388k absent, 220512k reserved, 7176k data, 1260k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:440
>Console: colour VGA+ 80x25
>console [tty0] enabled
>allocated 31457280 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2992.514 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.02 BogoMIPS (lpj=2992514)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 4 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 20962 entries in 83 pages
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
>Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>... version:                0
>... bit width:              40
>... generic registers:      18
>... value mask:             000000ffffffffff
>... max period:             0000007fffffffff
>... fixed-purpose events:   0
>... event mask:             000000000003ffff
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1
>Brought up 2 CPUs
>Total of 2 processors activated (11970.05 BogoMIPS).
>sizeof(vma)=200 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=592 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2648 bytes
>devtmpfs: initialized
>PM: Registering ACPI NVS region at efe8cc00 (8192 bytes)
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>PCI: MCFG area at f0000000 reserved in E820
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: BIOS _OSI(Linux) query ignored
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xeff00000-0xefffffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xf4000000-0xfebfffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xffa80800-0xffa80bff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xffa7c000-0xffa7ffff] (ignored)
>pci 0000:00:1b.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20: [io  0xff80-0xff9f]
>pci 0000:00:1d.1: reg 20: [io  0xff60-0xff7f]
>pci 0000:00:1d.2: reg 20: [io  0xff40-0xff5f]
>pci 0000:00:1d.3: reg 20: [io  0xff20-0xff3f]
>pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.1: reg 10: [io  0x01f0-0x01f7]
>pci 0000:00:1f.1: reg 14: [io  0x03f4-0x03f7]
>pci 0000:00:1f.1: reg 18: [io  0x0170-0x0177]
>pci 0000:00:1f.1: reg 1c: [io  0x0374-0x0377]
>pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
>pci 0000:00:1f.2: reg 14: [io  0xfe10-0xfe13]
>pci 0000:00:1f.2: reg 18: [io  0xfe20-0xfe27]
>pci 0000:00:1f.2: reg 1c: [io  0xfe30-0xfe33]
>pci 0000:00:1f.2: reg 20: [io  0xfea0-0xfeaf]
>pci 0000:00:1f.2: reg 24: [mem 0xfebfbc00-0xfebfbfff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20: [io  0xece0-0xecff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:03:00.0: reg 10: [mem 0xfe9e0000-0xfe9fffff]
>pci 0000:03:00.0: reg 14: [mem 0xfe400000-0xfe7fffff]
>pci 0000:03:00.0: reg 18: [io  0xdce0-0xdcff]
>pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:03:00.0: PME# disabled
>pci 0000:00:1c.5: PCI bridge to [bus 03-03]
>pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe9fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:04:04.0: reg 10: [mem 0xfd000000-0xfdffffff]
>pci 0000:04:04.0: reg 14: [mem 0xfa000000-0xfbffffff pref]
>pci 0000:04:04.0: reg 30: [mem 0xfe300000-0xfe30ffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfd000000-0xfe3fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
>pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
>Unable to assume _OSC PCIe control. Disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
>vgaarb: device added: PCI:0000:04:04.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:04:04.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0060]
>pnp 00:01: [io  0x0064]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x0800-0x085f]
>pnp 00:01: [io  0x0c00-0x0c7f]
>pnp 00:01: [io  0x0860-0x08ff]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [io  0x0080-0x009f]
>pnp 00:02: [io  0x0000-0x001f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [io  0x00f0-0x00ff]
>pnp 00:03: [irq 13]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x0070-0x007f]
>pnp 00:05: [irq 8]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [mem 0x00000000-0x0009ffff]
>pnp 00:06: [mem 0x00100000-0x00ffffff]
>pnp 00:06: [mem 0x01000000-0xefe8cbff]
>pnp 00:06: [mem 0x000f0000-0x000fffff]
>pnp 00:06: [mem 0x000c0000-0x000cbfff]
>pnp 00:06: [mem 0xfec00000-0xfecfffff]
>pnp 00:06: [mem 0xfee00000-0xfeefffff]
>pnp 00:06: [mem 0xfed20000-0xfed9ffff]
>pnp 00:06: [mem 0xffb00000-0xffbfffff]
>pnp 00:06: [mem 0xffc00000-0xffffffff]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:07: [mem 0xf0000000-0xf3ffffff]
>pnp 00:07: [mem 0xfeda0000-0xfedacfff]
>pnp 00:07: [io  0x0100-0x01fe]
>pnp 00:07: [io  0x0200-0x0277]
>pnp 00:07: [io  0x0280-0x02e7]
>pnp 00:07: [io  0x02e8-0x02ef]
>pnp 00:07: [io  0x02f0-0x02f7]
>pnp 00:07: [io  0x02f8-0x02ff]
>pnp 00:07: [io  0x0300-0x0377]
>pnp 00:07: [io  0x0380-0x03bb]
>pnp 00:07: [io  0x03c0-0x03e7]
>pnp 00:07: [io  0x03f6-0x03f7]
>pnp 00:07: [io  0x0400-0x04cf]
>pnp 00:07: [io  0x04d2-0x057f]
>pnp 00:07: [io  0x0580-0x0677]
>pnp 00:07: [io  0x0680-0x0777]
>pnp 00:07: [io  0x0780-0x07bb]
>pnp 00:07: [io  0x07c0-0x07ff]
>pnp 00:07: [io  0x08e0-0x08ff]
>pnp 00:07: [io  0x0900-0x09fe]
>pnp 00:07: [io  0x0a00-0x0afe]
>pnp 00:07: [io  0x0b00-0x0bfe]
>pnp 00:07: [io  0x0c80-0x0caf]
>pnp 00:07: [io  0x0cb0-0x0cbf]
>pnp 00:07: [io  0x0cc0-0x0cf7]
>pnp 00:07: [io  0x0d00-0x0dfe]
>pnp 00:07: [io  0x0e00-0x0efe]
>pnp 00:07: [io  0x0f00-0x0ffe]
>pnp 00:07: [io  0x2000-0x20fe]
>pnp 00:07: [io  0x2100-0x21fe]
>pnp 00:07: [io  0x2200-0x22fe]
>pnp 00:07: [io  0x2300-0x23fe]
>pnp 00:07: [io  0x2400-0x24fe]
>pnp 00:07: [io  0x2500-0x25fe]
>pnp 00:07: [io  0x2600-0x26fe]
>pnp 00:07: [io  0x2700-0x27fe]
>pnp 00:07: [io  0x2800-0x28fe]
>pnp 00:07: [io  0x2900-0x29fe]
>pnp 00:07: [io  0x2a00-0x2afe]
>pnp 00:07: [io  0x2b00-0x2bfe]
>pnp 00:07: [io  0x2c00-0x2cfe]
>pnp 00:07: [io  0x2d00-0x2dfe]
>pnp 00:07: [io  0x2e00-0x2efe]
>pnp 00:07: [io  0x2f00-0x2ffe]
>pnp 00:07: [io  0x5000-0x50fe]
>pnp 00:07: [io  0x5100-0x51fe]
>pnp 00:07: [io  0x5200-0x52fe]
>pnp 00:07: [io  0x5300-0x53fe]
>pnp 00:07: [io  0x5400-0x54fe]
>pnp 00:07: [io  0x5500-0x55fe]
>pnp 00:07: [io  0x5600-0x56fe]
>pnp 00:07: [io  0x5700-0x57fe]
>pnp 00:07: [io  0x5800-0x58fe]
>pnp 00:07: [io  0x5900-0x59fe]
>pnp 00:07: [io  0x5a00-0x5afe]
>pnp 00:07: [io  0x5b00-0x5bfe]
>pnp 00:07: [io  0x5c00-0x5cfe]
>pnp 00:07: [io  0x5d00-0x5dfe]
>pnp 00:07: [io  0x5e00-0x5efe]
>pnp 00:07: [io  0x5f00-0x5ffe]
>pnp 00:07: [io  0x6000-0x60fe]
>pnp 00:07: [io  0x6100-0x61fe]
>pnp 00:07: [io  0x6200-0x62fe]
>pnp 00:07: [io  0x6300-0x63fe]
>pnp 00:07: [io  0x6400-0x64fe]
>pnp 00:07: [io  0x6500-0x65fe]
>pnp 00:07: [io  0x6600-0x66fe]
>pnp 00:07: [io  0x6700-0x67fe]
>pnp 00:07: [io  0x6800-0x68fe]
>pnp 00:07: [io  0x6900-0x69fe]
>pnp 00:07: [io  0x6a00-0x6afe]
>pnp 00:07: [io  0x6b00-0x6bfe]
>pnp 00:07: [io  0x6c00-0x6cfe]
>pnp 00:07: [io  0x6d00-0x6dfe]
>pnp 00:07: [io  0x6e00-0x6efe]
>pnp 00:07: [io  0x6f00-0x6ffe]
>pnp 00:07: [io  0xa000-0xa0fe]
>pnp 00:07: [io  0xa100-0xa1fe]
>pnp 00:07: [io  0xa200-0xa2fe]
>pnp 00:07: [io  0xa300-0xa3fe]
>pnp 00:07: [io  0xa400-0xa4fe]
>pnp 00:07: [io  0xa500-0xa5fe]
>pnp 00:07: [io  0xa600-0xa6fe]
>pnp 00:07: [io  0xa700-0xa7fe]
>pnp 00:07: [io  0xa800-0xa8fe]
>pnp 00:07: [io  0xa900-0xa9fe]
>pnp 00:07: [io  0xaa00-0xaafe]
>pnp 00:07: [io  0xab00-0xabfe]
>pnp 00:07: [io  0xac00-0xacfe]
>pnp 00:07: [io  0xad00-0xadfe]
>pnp 00:07: [io  0xae00-0xaefe]
>pnp 00:07: [io  0xaf00-0xaffe]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 8 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [io  0x0800-0x085f] has been reserved
>system 00:01: [io  0x0c00-0x0c7f] has been reserved
>system 00:01: [io  0x0860-0x08ff] has been reserved
>system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:06: [mem 0x00100000-0x00ffffff] could not be reserved
>system 00:06: [mem 0x01000000-0xefe8cbff] could not be reserved
>system 00:06: [mem 0x000f0000-0x000fffff] could not be reserved
>system 00:06: [mem 0x000c0000-0x000cbfff] could not be reserved
>system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
>system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:06: [mem 0xfed20000-0xfed9ffff] has been reserved
>system 00:06: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:06: [mem 0xffc00000-0xffffffff] has been reserved
>system 00:07: [io  0x0100-0x01fe] could not be reserved
>system 00:07: [io  0x0200-0x0277] has been reserved
>system 00:07: [io  0x0280-0x02e7] has been reserved
>system 00:07: [io  0x02e8-0x02ef] has been reserved
>system 00:07: [io  0x02f0-0x02f7] has been reserved
>system 00:07: [io  0x02f8-0x02ff] has been reserved
>system 00:07: [io  0x0300-0x0377] could not be reserved
>system 00:07: [io  0x0380-0x03bb] has been reserved
>system 00:07: [io  0x03c0-0x03e7] could not be reserved
>system 00:07: [io  0x03f6-0x03f7] could not be reserved
>system 00:07: [io  0x0400-0x04cf] has been reserved
>system 00:07: [io  0x04d2-0x057f] has been reserved
>system 00:07: [io  0x0580-0x0677] has been reserved
>system 00:07: [io  0x0680-0x0777] has been reserved
>system 00:07: [io  0x0780-0x07bb] has been reserved
>system 00:07: [io  0x07c0-0x07ff] has been reserved
>system 00:07: [io  0x08e0-0x08ff] has been reserved
>system 00:07: [io  0x0900-0x09fe] has been reserved
>system 00:07: [io  0x0a00-0x0afe] has been reserved
>system 00:07: [io  0x0b00-0x0bfe] has been reserved
>system 00:07: [io  0x0c80-0x0caf] has been reserved
>system 00:07: [io  0x0cb0-0x0cbf] has been reserved
>system 00:07: [io  0x0cc0-0x0cf7] has been reserved
>system 00:07: [io  0x0d00-0x0dfe] has been reserved
>system 00:07: [io  0x0e00-0x0efe] has been reserved
>system 00:07: [io  0x0f00-0x0ffe] has been reserved
>system 00:07: [io  0x2000-0x20fe] has been reserved
>system 00:07: [io  0x2100-0x21fe] has been reserved
>system 00:07: [io  0x2200-0x22fe] has been reserved
>system 00:07: [io  0x2300-0x23fe] has been reserved
>system 00:07: [io  0x2400-0x24fe] has been reserved
>system 00:07: [io  0x2500-0x25fe] has been reserved
>system 00:07: [io  0x2600-0x26fe] has been reserved
>system 00:07: [io  0x2700-0x27fe] has been reserved
>system 00:07: [io  0x2800-0x28fe] has been reserved
>system 00:07: [io  0x2900-0x29fe] has been reserved
>system 00:07: [io  0x2a00-0x2afe] has been reserved
>system 00:07: [io  0x2b00-0x2bfe] has been reserved
>system 00:07: [io  0x2c00-0x2cfe] has been reserved
>system 00:07: [io  0x2d00-0x2dfe] has been reserved
>system 00:07: [io  0x2e00-0x2efe] has been reserved
>system 00:07: [io  0x2f00-0x2ffe] has been reserved
>system 00:07: [io  0x5000-0x50fe] has been reserved
>system 00:07: [io  0x5100-0x51fe] has been reserved
>system 00:07: [io  0x5200-0x52fe] has been reserved
>system 00:07: [io  0x5300-0x53fe] has been reserved
>system 00:07: [io  0x5400-0x54fe] has been reserved
>system 00:07: [io  0x5500-0x55fe] has been reserved
>system 00:07: [io  0x5600-0x56fe] has been reserved
>system 00:07: [io  0x5700-0x57fe] has been reserved
>system 00:07: [io  0x5800-0x58fe] has been reserved
>system 00:07: [io  0x5900-0x59fe] has been reserved
>system 00:07: [io  0x5a00-0x5afe] has been reserved
>system 00:07: [io  0x5b00-0x5bfe] has been reserved
>system 00:07: [io  0x5c00-0x5cfe] has been reserved
>system 00:07: [io  0x5d00-0x5dfe] has been reserved
>system 00:07: [io  0x5e00-0x5efe] has been reserved
>system 00:07: [io  0x5f00-0x5ffe] has been reserved
>system 00:07: [io  0x6000-0x60fe] has been reserved
>system 00:07: [io  0x6100-0x61fe] has been reserved
>system 00:07: [io  0x6200-0x62fe] has been reserved
>system 00:07: [io  0x6300-0x63fe] has been reserved
>system 00:07: [io  0x6400-0x64fe] has been reserved
>system 00:07: [io  0x6500-0x65fe] has been reserved
>system 00:07: [io  0x6600-0x66fe] has been reserved
>system 00:07: [io  0x6700-0x67fe] has been reserved
>system 00:07: [io  0x6800-0x68fe] has been reserved
>system 00:07: [io  0x6900-0x69fe] has been reserved
>system 00:07: [io  0x6a00-0x6afe] has been reserved
>system 00:07: [io  0x6b00-0x6bfe] has been reserved
>system 00:07: [io  0x6c00-0x6cfe] has been reserved
>system 00:07: [io  0x6d00-0x6dfe] has been reserved
>system 00:07: [io  0x6e00-0x6efe] has been reserved
>system 00:07: [io  0x6f00-0x6ffe] has been reserved
>system 00:07: [io  0xa000-0xa0fe] has been reserved
>system 00:07: [io  0xa100-0xa1fe] has been reserved
>system 00:07: [io  0xa200-0xa2fe] has been reserved
>system 00:07: [io  0xa300-0xa3fe] has been reserved
>system 00:07: [io  0xa400-0xa4fe] has been reserved
>system 00:07: [io  0xa500-0xa5fe] has been reserved
>system 00:07: [io  0xa600-0xa6fe] has been reserved
>system 00:07: [io  0xa700-0xa7fe] has been reserved
>system 00:07: [io  0xa800-0xa8fe] has been reserved
>system 00:07: [io  0xa900-0xa9fe] has been reserved
>system 00:07: [io  0xaa00-0xaafe] has been reserved
>system 00:07: [io  0xab00-0xabfe] has been reserved
>system 00:07: [io  0xac00-0xacfe] has been reserved
>system 00:07: [io  0xad00-0xadfe] has been reserved
>system 00:07: [io  0xae00-0xaefe] has been reserved
>system 00:07: [io  0xaf00-0xaffe] has been reserved
>system 00:07: [mem 0xf0000000-0xf3ffffff] has been reserved
>system 00:07: [mem 0xfeda0000-0xfedacfff] has been reserved
>pci 0000:04:04.0: address space collision: [mem 0xfe300000-0xfe30ffff pref] conflicts with PCI Bus 0000:04 [mem 0xfd000000-0xfe3fffff]
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
>pci 0000:00:1c.4: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
>pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
>pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
>pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4600000-0xf47fffff 64bit pref]
>pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>pci 0000:00:1c.0:   bridge window [mem 0xfea00000-0xfeafffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf4600000-0xf47fffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4: PCI bridge to [bus 02-02]
>pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
>pci 0000:00:1c.4:   bridge window [mem 0xf4200000-0xf43fffff]
>pci 0000:00:1c.4:   bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
>pci 0000:00:1c.5: PCI bridge to [bus 03-03]
>pci 0000:00:1c.5: PCI bridge to [bus 03-03]
>pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:1c.5:   bridge window [mem 0xfe400000-0xfe9fffff]
>pci 0000:00:1c.5:   bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
>pci 0000:04:04.0: BAR 6: assigned [mem 0xfe000000-0xfe00ffff pref]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0: PCI bridge to [bus 04-04]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem 0xfd000000-0xfe3fffff]
>pci 0000:00:1e.0:   bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
>  alloc irq_desc for 16 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.4: setting latency timer to 64
>  alloc irq_desc for 17 on node -1
>  alloc kstat_irqs on node -1
>pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
>pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
>pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
>pci_bus 0000:01: resource 2 [mem 0xf4600000-0xf47fffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
>pci_bus 0000:02: resource 1 [mem 0xf4200000-0xf43fffff]
>pci_bus 0000:02: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe9fffff]
>pci_bus 0000:03: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
>pci_bus 0000:04: resource 1 [mem 0xfd000000-0xfe3fffff]
>pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
>pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:04: resource 5 [mem 0x00000000-0xfffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:04:04.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 15646k freed
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>type=2000 audit(1334942798.402:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7276
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key 25D5FD8BBDE42C2F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: setting latency timer to 64
>  alloc irq_desc for 24 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:1c.4: setting latency timer to 64
>  alloc irq_desc for 25 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>  alloc irq_desc for 26 on node -1
>  alloc kstat_irqs on node -1
>pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [VBTN]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle registered with cpuidle
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>  alloc irq_desc for 21 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: using broken periodic workaround
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-262.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-262.el6.x86_64 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>  alloc irq_desc for 22 on node -1
>  alloc kstat_irqs on node -1
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-262.el6.x86_64 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>  alloc irq_desc for 18 on node -1
>  alloc kstat_irqs on node -1
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-262.el6.x86_64 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>  alloc irq_desc for 23 on node -1
>  alloc kstat_irqs on node -1
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-262.el6.x86_64 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:05: setting system clock to 2012-04-20 17:26:39 UTC (1334942799)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1260k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 984k freed
>Freeing unused kernel memory: 1736k freed
>dracut: dracut-004-256.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>udev: starting version 147
>ACPI: WMI: Mapper loaded
>[drm] Initialized drm 1.1.0 20060810
>VGA switcheroo: detected Optimus DSM method \ handle
>nouveau 0000:04:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] nouveau 0000:04:04.0: Detected an NV 0 generation card (0x20154000)
>[drm] nouveau 0000:04:04.0: Attempting to load BIOS image from PRAMIN
>usb 1-6: new high speed USB device number 2 using ehci_hcd
>[drm] nouveau 0000:04:04.0: ... appears to be valid
>[drm] nouveau 0000:04:04.0: BMP BIOS found
>[drm] nouveau 0000:04:04.0: BMP version 5.1
>[drm] nouveau 0000:04:04.0: Bios version 02.05.17.01
>[drm] nouveau 0000:04:04.0: No DCB data found in VBIOS
>[drm] nouveau 0000:04:04.0: I2C3: type 1 index 0/0 unknown
>[drm] nouveau 0000:04:04.0: I2C5: type 2 index 0/0 unknown
>[drm] nouveau 0000:04:04.0: I2C9: type 1 index 0/0 unknown
>[drm] nouveau 0000:04:04.0: I2C10: type 2 index 0/0 unknown
>[drm] nouveau 0000:04:04.0: MXM: no VBIOS data, nothing to do
>[drm] nouveau 0000:04:04.0: AUXCH(63): magic wait 0x00040e20
>[drm] nouveau 0000:04:04.0: 0 available performance level(s)
>[drm] nouveau 0000:04:04.0: c: core 125MHz memory 143MHz
>[TTM] Zone  kernel: Available graphics memory: 1864700 kiB.
>[TTM] Initializing pool allocator.
>[TTM] Initializing DMA pool allocator.
>[drm] nouveau 0000:04:04.0: Detected 16MiB VRAM
>mtrr: type mismatch for fa000000,2000000 old: write-back new: write-combining
>[drm] nouveau 0000:04:04.0: 64 MiB GART (aperture)
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>[drm] nouveau 0000:04:04.0: Saving VGA fonts
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] nouveau 0000:04:04.0: Setting dpms mode 3 on vga encoder (output 0)
>usb 1-6: New USB device found, idVendor=03f0, idProduct=2b17
>usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6: Product: HP LaserJet 1020
>usb 1-6: Manufacturer: Hewlett-Packard
>usb 1-6: SerialNumber: FN15359
>usb 1-6: configuration #1 chosen from 1 choice
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: allocated 1024x768 fb: 0x44000, bo ffff880037e58800
>fbcon: nouveaufb (fb0) is primary device
>[drm] nouveau 0000:04:04.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:04:04.0: Output VGA-1 is running on CRTC 0 using output A
>Console: switching to colour frame buffer device 128x48
>fb0: nouveaufb frame buffer device
>drm: registered panic notifier
>[drm] Initialized nouveau 0.0.16 20090420 for 0000:04:04.0 on minor 0
>dracut: Starting plymouth daemon
>[drm] nouveau 0000:04:04.0: Load detected on head A
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata2: port disabled. ignoring.
>Refined TSC clocksource calibration: 2992.577 MHz.
>Switching to clocksource tsc
>ata1.00: ATAPI: SONY DVD-ROM DDU1615, FDS2, max UDMA/33
>ata1.01: ATAPI: _NEC DVD_RW ND-3550A, 1.04, max UDMA/33
>usb 5-1: new low speed USB device number 2 using uhci_hcd
>ata1.00: configured for UDMA/33
>ata1.01: configured for UDMA/33
>scsi 0:0:0:0: CD-ROM            SONY     DVD-ROM DDU1615  FDS2 PQ: 0 ANSI: 5
>scsi 0:0:1:0: CD-ROM            _NEC     DVD_RW ND-3550A  1.04 PQ: 0 ANSI: 5
>ahci 0000:00:1f.2: version 3.0
>  alloc irq_desc for 20 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
>  alloc irq_desc for 27 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 27
>ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
>ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
>ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 27
>usb 5-1: New USB device found, idVendor=0461, idProduct=4d22
>usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 5-1: Product: USB Optical Mouse
>usb 5-1: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input3
>generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.3-1/input0
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
>ata3.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
>usb 5-2: new low speed USB device number 3 using uhci_hcd
>usb 5-2: New USB device found, idVendor=413c, idProduct=2106
>usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 5-2: Product: Dell QuietKey Keyboard
>usb 5-2: Manufacturer: Dell
>usb 5-2: configuration #1 chosen from 1 choice
>input: Dell Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
>generic-usb 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell QuietKey Keyboard] on usb-0000:00:1d.3-2/input0
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
>ata4.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata6.00: ATA-8: WDC WD6400AAKS-22A7B0, 01.03B01, max UDMA/133
>ata6.00: 1250263728 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
>ata6.00: configured for UDMA/133
>ata5.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133
>ata5.00: 625142448 sectors, multi 8: LBA48 NCQ (depth 1), AA
>ata5.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5
>scsi 5:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 0:0:1:0: Attached scsi CD-ROM sr1
>sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:
>sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc:
>sd 5:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
>sd 5:0:0:0: [sdd] Write Protect is off
>sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd:
> sdb: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
> sdc1 sdc2
>sd 4:0:0:0: [sdc] Attached SCSI disk
> sdd1 sdd2
>sd 5:0:0:0: [sdd] Attached SCSI disk
> sdb1 sdb2
>sd 3:0:0:0: [sdb] Attached SCSI disk
>ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
>ata4.00: irq_stat 0x08000000, interface fatal error
>ata4: SError: { UnrecovData HostInt 10B8B BadCRC }
>ata4.00: failed command: READ FPDMA QUEUED
>ata4.00: cmd 60/08:00:08:01:00/00:00:00:00:00/40 tag 0 ncq 4096 in
>         res 40/00:04:08:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
>ata4.00: status: { DRDY }
>ata4: hard resetting link
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: configured for UDMA/133
>ata4: EH complete
>ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
>ata4.00: irq_stat 0x08000000, interface fatal error
>ata4: SError: { UnrecovData HostInt 10B8B BadCRC }
>ata4.00: failed command: READ FPDMA QUEUED
>ata4.00: cmd 60/08:00:80:01:00/00:00:00:00:00/40 tag 0 ncq 4096 in
>         res 40/00:04:80:01:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
>ata4.00: status: { DRDY }
>ata4: hard resetting link
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: configured for UDMA/133
>ata4: EH complete
>ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
>ata4.00: irq_stat 0x08000000, interface fatal error
>ata4: SError: { UnrecovData HostInt 10B8B BadCRC }
>ata4.00: failed command: READ FPDMA QUEUED
>ata4.00: cmd 60/08:00:e8:03:00/00:00:00:00:00/40 tag 0 ncq 4096 in
>         res 40/00:04:e8:03:00/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
>ata4.00: status: { DRDY }
>ata4: hard resetting link
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: configured for UDMA/133
>ata4: EH complete
>ata4: limiting SATA link speed to 1.5 Gbps
>ata4.00: exception Emask 0x50 SAct 0x1 SErr 0x280900 action 0x6 frozen
>ata4.00: irq_stat 0x08000000, interface fatal error
>ata4: SError: { UnrecovData HostInt 10B8B BadCRC }
>ata4.00: failed command: READ FPDMA QUEUED
>ata4.00: cmd 60/07:00:b0:32:0f/00:00:00:00:00/40 tag 0 ncq 3584 in
>         res 40/00:04:b0:32:0f/00:00:00:00:00/40 Emask 0x50 (ATA bus error)
>ata4.00: status: { DRDY }
>ata4: hard resetting link
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata4.00: configured for UDMA/133
>ata4: EH complete
>dracut: Scanning devices sda2 sdb2 sdc2 sdd2  for LVM logical volumes vg0/rhel6 vg0/swap 
>dracut: inactive '/dev/vg0/root' [30.00 GiB] inherit
>dracut: inactive '/dev/vg0/homeriel' [30.00 GiB] inherit
>dracut: inactive '/dev/vg0/data' [200.00 GiB] inherit
>dracut: inactive '/dev/vg0/angband' [80.00 GiB] inherit
>dracut: inactive '/dev/vg0/backup' [790.00 GiB] inherit
>dracut: inactive '/dev/vg0/ungol' [10.00 GiB] inherit
>dracut: inactive '/dev/vg0/rhun' [10.00 GiB] inherit
>dracut: inactive '/dev/vg0/gondor' [10.00 GiB] inherit
>dracut: inactive '/dev/vg0/rohan' [65.00 GiB] inherit
>dracut: inactive '/dev/vg0/shelob' [25.00 GiB] inherit
>dracut: inactive '/dev/vg0/swap' [4.00 GiB] inherit
>dracut: inactive '/dev/vg0/fscache' [30.00 GiB] inherit
>dracut: inactive '/dev/vg0/shelob_mlog' [4.00 MiB] inherit
>dracut: inactive '/dev/vg0/shelob-mysql' [30.00 GiB] inherit
>dracut: inactive '/dev/vg0/rhel6' [97.66 GiB] inherit
>dracut: inactive '/dev/vg0/doriath' [50.00 GiB] inherit
>EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: 
>dracut: Mounted root filesystem /dev/mapper/vg0-rhel6
>dracut: Loading SELinux policy
>type=1404 audit(1334942803.406:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 227003 rules.
>SELinux: 2048 avtab hash slots, 227003 rules.
>SELinux:  9 users, 12 roles, 3610 types, 182 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 227003 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-1, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1334942804.158:3): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>readahead: starting
>udev: starting version 147
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>  alloc irq_desc for 28 on node -1
>  alloc kstat_irqs on node -1
>snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k
>e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>e1000e 0000:03:00.0: Disabling ASPM L0s L1
>e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>e1000e 0000:03:00.0: setting latency timer to 64
>  alloc irq_desc for 29 on node -1
>  alloc kstat_irqs on node -1
>e1000e 0000:03:00.0: irq 29 for MSI/MSI-X
>e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:13:72:17:4a:9c
>e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:03:00.0: eth0: MAC: 2, PHY: 2, PBA No: 0051FF-0FF
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>microcode: CPU0 sig=0xf64, pf=0x4, revision=0x4
>platform microcode: firmware: requesting intel-ucode/0f-06-04
>microcode: CPU1 sig=0xf64, pf=0x4, revision=0x4
>platform microcode: firmware: requesting intel-ucode/0f-06-04
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sr 0:0:1:0: Attached scsi generic sg1 type 5
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
>usbcore: registered new interface driver usblp
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>usblp0: removed
>EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
>SELinux: initialized (dev sdb1, type ext4), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-4): using internal journal
>EXT3-fs (dm-4): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-6): using internal journal
>EXT3-fs (dm-6): mounted filesystem with ordered data mode
>SELinux: initialized (dev dm-6, type ext3), uses xattr
>Adding 4194296k swap on /dev/mapper/vg0-swap.  Priority:-1 extents:1 across:4194296k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>Bridge firewalling registered
>e1000e 0000:03:00.0: irq 29 for MSI/MSI-X
>e1000e 0000:03:00.0: irq 29 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>device eth0 entered promiscuous mode
>br0: starting userspace STP failed, starting kernel STP
>e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
>e1000e 0000:03:00.0: eth0: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>br0: topology change detected, propagating
>br0: port 1(eth0) entering forwarding state
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>eth0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>device virbr0-nic entered promiscuous mode
>virbr0: starting userspace STP failed, starting kernel STP
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>Ebtables v2.0 registered
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>lo: Disabled Privacy Extensions
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>device vnet0 entered promiscuous mode
>br0: topology change detected, propagating
>br0: port 2(vnet0) entering forwarding state
>device vnet1 entered promiscuous mode
>br0: topology change detected, propagating
>br0: port 3(vnet1) entering forwarding state
>vnet0: no IPv6 routers present
>br0: port 3(vnet1) entering disabled state
>device vnet1 left promiscuous mode
>br0: port 3(vnet1) entering disabled state
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:04:04.0: Setting dpms mode 0 on vga encoder (output 0)
>[drm] nouveau 0000:04:04.0: Output VGA-1 is running on CRTC 0 using output A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
>[drm] nouveau 0000:04:04.0: Setting dpms mode 3 on vga encoder (output 0)
>[drm] nouveau 0000:04:04.0: Setting dpms mode 0 on vga encoder (output 0)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-3): using internal journal
>EXT3-fs (dm-3): mounted filesystem with writeback data mode
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>[drm] nouveau 0000:04:04.0: Load detected on head A
>fuse init (API version 7.13)
>[drm] nouveau 0000:04:04.0: Load detected on head A
>device vnet1 entered promiscuous mode
>br0: topology change detected, propagating
>br0: port 3(vnet1) entering forwarding state
>br0: port 3(vnet1) entering disabled state
>device vnet1 left promiscuous mode
>br0: port 3(vnet1) entering disabled state
>[drm] nouveau 0000:04:04.0: PFIFO_DMA_PUSHER - Ch 1 Get 0x000314c0 Put 0x0001fd90 State 0x8000a490 (err: INVALID_CMD) Push 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0400 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0404 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0408 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x040c data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0410 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0414 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0418 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x041c data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0420 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0424 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0428 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x042c data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0430 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0434 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0438 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x043c data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0440 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0444 data 0x00000000
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x0448 data 0x00000003
>[drm] nouveau 0000:04:04.0: PGRAPH - NOTIFY nsource: METHOD_CNT nstatus: INVALID_STATE
>[drm] nouveau 0000:04:04.0: PGRAPH - ch 1/5 class 0x0061 mthd 0x044c data 0x00104300

Actions: View

Attachments on bug 814818: 579083 | 579084