Attachment 580378 Details for Bug 750421 – console output

console output

bz750421.txt (text/plain), 13.33 KB, created by Xiaoqing Wei on 2012-04-26 07:03:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Xiaoqing Wei

Created: 2012-04-26 07:03:10 UTC

Size: 13.33 KB

patch

obsolete

># nc -U  /tmp/serial-20120426-111129-IlrO 
>Linux version 2.6.18-308.el5 (mockbuild@x86-010.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Fri Jan 27 17:21:15 EST 2012
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
> BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
>Warning only 4GB will be used.
>Use a PAE enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fda50
>Using x86 segment limits to approximate NX protection
>DMI 2.4 present.
>kvm-clock: cpu 0, msr 0:74a9e1, boot clock
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0xb008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>Processor #3 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>Processor #4 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>Processor #5 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 6:12 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 6:12 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e2000000 (gap: e0000000:1ffbc000)
>TSC: Frequency read from the hypervisor
>Detected 3392.294 MHz processor.
>kvm-clock: cpu 0, msr 0:b011ce1, primary cpu clock
>Built 1 zonelists.  Total pages: 1048576
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200 console=tty0 crashkernel=128M@16M divider=10
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0773000 soft=c0753000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3495868k/4194304k available (2207k kernel code, 172876k reserved, 919k data, 232k init, 2752500k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.58 BogoMIPS (lpj=3392294)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 11000
>CPU 1 irqstacks, hard=c0774000 soft=c0754000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6795.03 BogoMIPS (lpj=3397517)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 2/2 eip 11000
>CPU 2 irqstacks, hard=c0775000 soft=c0755000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 6787.98 BogoMIPS (lpj=3393990)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 3/3 eip 11000
>CPU 3 irqstacks, hard=c0776000 soft=c0756000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 6783.95 BogoMIPS (lpj=3391977)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 4/4 eip 11000
>CPU 4 irqstacks, hard=c0777000 soft=c0757000
>Initializing CPU#4
>Calibrating delay using timer specific routine.. 6783.71 BogoMIPS (lpj=3391858)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#4.
>CPU4: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 5/5 eip 11000
>CPU 5 irqstacks, hard=c0778000 soft=c0758000
>Initializing CPU#5
>Calibrating delay using timer specific routine.. 6772.12 BogoMIPS (lpj=3386060)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#5.
>CPU5: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 6/6 eip 11000
>CPU 6 irqstacks, hard=c0779000 soft=c0759000
>Initializing CPU#6
>Calibrating delay using timer specific routine.. 7702.49 BogoMIPS (lpj=3851245)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 2
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#6.
>CPU6: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 7/7 eip 11000
>CPU 7 irqstacks, hard=c077a000 soft=c075a000
>Initializing CPU#7
>Calibrating delay using timer specific routine.. 9630.76 BogoMIPS (lpj=4815380)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#7.
>CPU7: Intel Westmere E56xx/L56xx/X56xx (Nehalem-C) stepping 01
>Total of 8 processors activated (58040.64 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Using local APIC timer interrupts.
>WARNING calibrate_APIC_clock: the APIC timer calibration may be wrong.
>checking TSC synchronization across 8 CPUs: passed.
>kvm-clock: cpu 1, msr 0:b018b25, secondary cpu clock
>kvm-clock: cpu 2, msr 0:b01f969, secondary cpu clock
>kvm-clock: cpu 3, msr 0:b0267ad, secondary cpu clock
>kvm-clock: cpu 4, msr 0:b02d5f1, secondary cpu clock
>kvm-clock: cpu 5, msr 0:b034435, secondary cpu clock
>kvm-clock: cpu 6, msr 0:b03b279, secondary cpu clock
>kvm-clock: cpu 7, msr 0:b0420bd, secondary cpu clock
>Brought up 8 CPUs
>migration_cost=328
>checking if image is initramfs... it is
>Freeing initrd memory: 3355k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=0
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region b000-b03f claimed by PIIX4 ACPI
>PCI quirk: region b100-b10f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 8 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Using TSC for driving interrupts
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1335421414.855:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>alg: No test for crc32c (crc32c-generic)
>ksign: Installing public key data
>Loading keyring
>- Added public key DC995CC0B59AF121
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX3: IDE controller at PCI slot 0000:00:01.1
>PIIX3: chipset revision 0
>PIIX3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
>hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>input: AT Translated Set 2 keyboard as /class/input/input0
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S5)
>Time: kvm-clock clocksource has been installed.
>Initalizing network drop monitor service
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 417k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:04.0[D] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11
>uhci_hcd 0000:00:04.0: UHCI Host Controller
>uhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.0: irq 11, io base 0x0000c060
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, high) -> IRQ 11
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 10 (level, high) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 10 (level, high) -> IRQ 10
> vda: vda1 vda2
>SCSI subsystem initialized
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
>device-mapper: dm-raid45: initialized v0.2594l
>usb 1-1: configuration #1 chosen from 1 choice
>input: QEMU 0.12.1 QEMU USB Tablet as /class/input/input2
>input,hidraw0: USB HID v0.01 Pointer [QEMU 0.12.1 QEMU USB Tablet] on usb-0000:00:04.0-1
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>type=1403 audit(1335421441.114:2): policy loaded auid=4294967295 ses=4294967295
>Kernel panic - not syncing: Out of memory and no killable processes...
> 
>

Actions: View

Attachments on bug 750421: 566009 | 580378