Attachment 586546 Details for Bug 823871 – smart -a /dev/sda

smart -a /dev/sda

smart (text/plain), 5.37 KB, created by admin on 2012-05-24 05:44:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: admin

Created: 2012-05-24 05:44:03 UTC

Size: 5.37 KB

patch

obsolete

>smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.3.6-3.fc17.x86_64] (local build)
>Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Seagate Momentus 5400.6
>Device Model:     ST9500325AS
>Serial Number:    5VEJC9HJ
>LU WWN Device Id: 5 000c50 03933b646
>Firmware Version: 0001SDM1
>User Capacity:    500Â 107Â 862Â 016 bytes [500 GB]
>Sector Size:      512 bytes logical/physical
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   8
>ATA Standard is:  ATA-8-ACS revision 4
>Local Time is:    Thu May 24 12:35:54 2012 NOVT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x00)	Offline data collection activity
>					was never started.
>					Auto Offline Data Collection: Disabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		(    0) seconds.
>Offline data collection
>capabilities: 			 (0x73) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					No Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 ( 145) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   2) minutes.
>SCT capabilities: 	       (0x103b)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 10
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   118   099   006    Pre-fail  Always       -       192813011
>  3 Spin_Up_Time            0x0003   099   098   000    Pre-fail  Always       -       0
>  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       5909
>  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       37057401
>  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2151
> 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       743
>184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
>187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
>188 Command_Timeout         0x0032   100   097   000    Old_age   Always       -       17180131944
>189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
>190 Airflow_Temperature_Cel 0x0022   065   051   045    Old_age   Always       -       35 (Min/Max 31/35)
>191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       55
>192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
>193 Load_Cycle_Count        0x0032   054   054   000    Old_age   Always       -       92840
>194 Temperature_Celsius     0x0022   035   049   000    Old_age   Always       -       35 (0 1 0 0 0)
>195 Hardware_ECC_Recovered  0x001a   042   041   000    Old_age   Always       -       192813011
>197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
># 1  Extended offline    Completed without error       00%      2147         -
># 2  Extended offline    Aborted by host               60%      2145         -
># 3  Conveyance offline  Completed without error       00%      1863         -
># 4  Short offline       Completed without error       00%      1863         -
># 5  Short offline       Completed without error       00%        11         -
># 6  Short offline       Completed without error       00%         3         -
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 823871: 586544 | 586545 | 586546 | 586547 | 586548