Attachment 590450 Details for Bug 830199 – virsh console v7x86_64 output

virsh console v7x86_64 output

virsh console v7x86_64.txt (text/plain), 28.74 KB, created by chau nguyen on 2012-06-08 14:11:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: chau nguyen

Created: 2012-06-08 14:11:21 UTC

Size: 28.74 KB

patch

obsolete

>
>ot@w2k3-cert Desktop]# virsh console v7x86_64
>Connected to domain v7x86_64
>Escape character is ^]
>Linux version 2.6.18-128.el5 (mockbuild@hs20-bc1-7.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Dec 17 11:41:38 EST 2008
>Command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0, 115200
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
> BIOS-e820: 000000001fffd000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
>DMI 2.4 present.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001fffd000
>Bootmem setup node 0 0000000000000000-000000001fffd000
>Memory for crash kernel (0x0 to 0x0) notwithin permissible range
>disabling kdump
>ACPI: PM-Timer IO Port: 0xb008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 30000000 (gap: 20000000:dffbc000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 127919
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0, 115200
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Checking aperture...
>Memory: 507312k/524276k available (2494k kernel code, 16576k reserved, 1263k data, 200k init)
>Calibrating delay using timer specific routine.. 6214.81 BogoMIPS (lpj=3107408)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 32k freed
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 62499669
>Detected 62.499 MHz APIC timer.
>Brought up 1 CPUs
>testing NMI watchdog ... <4>WARNING: CPU#0: NMI appears to be stuck (0->0)!
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3092.667 MHz processor.
>checking if image is initramfs... it is
>Freeing initrd memory: 3236k freed
>NET: Registered protocol family 16
>No dock devices found.
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region b000-b03f claimed by PIIX4 ACPI
>PCI quirk: region b100-b10f claimed by PIIX4 SMB
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 6 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1339015942.562:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>alg: No test for crc32c (crc32c-generic)
>ksign: Installing public key data
>Loading keyring
>- Added public key 5C0DC734E64D24FA
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
>Activating ISA DMA hang workarounds.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX3: IDE controller at PCI slot 0000:00:01.1
>PIIX3: chipset revision 0
>PIIX3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
>hda: QEMU HARDDISK, ATA DISK drive
>hdb: QEMU HARDDISK, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 12582912 sectors (6442 MB) w/256KiB Cache, CHS=12483/255/63, (U)DMA
>hda: cache flushes supported
> hda: hda1 hda2
>hdb: max request size: 512KiB
>hdb: 204800 sectors (104 MB) w/256KiB Cache, CHS=203/255/63, (U)DMA
>hdb: cache flushes supported
> hdb: hdb1
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S3 S4 S5)
>Freeing unused kernel memory: 200k freed
>Write protecting the kernel read-only data: 482k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>Creating block device nodes.
>Loading ehci-hcd.ko module
>Loading ohci-hcd.ko module
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11
>uhci_hcd 0000:00:01.2: UHCI Host Controller
>uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>Loading dm-mod.ko module
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
>Loading dm-log.ko module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Loading dm-mem-cache.ko module
>Loading dm-region_hash.ko module
>Loading dm-message.ko module
>Loading dm-raid45.ko module
>device-mapper: dm-raid45: initialized v0.2429
>Waiting for driver initialization.
>Scanning and configuring dmraid supported devices
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>type=1404 audit(1339015967.847:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>type=1403 audit(1339015967.973:3): policy loaded auid=4294967295 ses=4294967295
>INIT: version 2.86 booting
>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Setting clock  (utc): Wed Jun  6 16:52:52 EDT 2012 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname dhcp-65-79.nay.redhat.com:  [  OK  ]
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
>/dev/VolGroup00/LogVol00: clean, 44830/1277952 files, 340056/1277952 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/hda1 
>/boot: clean, 33/26104 files, 15627/104388 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 3
>Entering non-interactive startup
>Applying Intel CPU microcode update: [  OK  ]
>Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "VolGroup00" monitored
>[  OK  ]
>Starting background readahead: [  OK  ]
>Checking for hardware changes [  OK  ]
>Starting mcstransd: [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>Starting auditd: [  OK  ]
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting portmap: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Starting system message bus: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting sshd: [  OK  ]
>Starting cups: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:file_t:s0) returned 22 for dev=hdb1 ino=13
>inode_doinit_with_dentry:  context_to_sid(unconfined_u:object_r:file_t:s0) returned 22 for dev=hdb1 ino=12
>Tested OS: Red Hat Enterprise Linux Server 5 (Tikanga)
>Kernel RPM: kernel-2.6.18-128.el5
>v7 version 1.1, release 23
>the controller /org/freedesktop/Hal/devices/pci_8086_7010 is already in testplan, will skip the block device /dev/hdb
>Hardware: Red Hat unknown KVM
>OS: Tikanga 5.3
>saved configuration to /var/v7/results.xml
>Created a new plan with 7 tests on 40 devices
>Checking for additional required packages based on the test plan:
>video requires xorg-x11-apps, system-config-display
>info requires kernel-devel
>The following rpms are required for testing:
> system-config-display xorg-x11-apps
>Running yum: --------------------------------
>This system is not registered with RHN.
>RHN support will be disabled.
>Error: Could not install rpm
>"yum install -y  system-config-display xorg-x11-apps" has output on stderr
>Error: could not install required rpms
>saved test plan to /var/v7/results.xml
>loaded results /var/v7/results.xml
>Tested OS: Red Hat Enterprise Linux Server 5 (Tikanga)
>Kernel RPM: kernel-2.6.18-128.el5
>v7 version 1.1, release 23
>the controller /org/freedesktop/Hal/devices/pci_8086_7010 is already in testplan, will skip the block device /dev/hdb
>Verifying V7 Server...
>Status: running
>Set server to 100.100.10.36 for  1 test(s)
>saved test plan to /var/v7/results.xml
>
>Running network:
>---------------------------------
>network    eth0       net_52_54_00_60_ce_e1                
>info                                                       
>
>running network on /org/freedesktop/Hal/devices/net_52_54_00_60_ce_e1
>mkdir -p /tmp/v7-network-yXwm5h/mnt/tests/V7/v7/network
>cp -a testinfo.desc runtest.sh network.py Makefile /tmp/v7-network-yXwm5h/mnt/tests/V7/v7/network
>install -m 0755 runtest.sh /tmp/v7-network-yXwm5h/mnt/tests/V7/v7/network
>make OUTPUTFILE=/var/log/v7/runs/1/network/output.log RUNMODE=auto UDI=/org/freedesktop/Hal/devices/net_52_54_00_60_ce_e1 DEVICE=eth0 TESTSERVER=100.100.10.36 run
>chmod a+x ./runtest.sh ./network.py
>./runtest.sh
>/tmp/v7-network-yXwm5h/mnt/tests/V7/v7/network/network.py
><output>
>Running ./network.py:
><output name="Setup" description="prepare for network testing">
>using test server 100.100.10.36
>Testing interface eth0
>ignoring interface lo
>ip address: 192.168.122.156
><summary>PASS</summary>
></output>
><output name="Interface Configuration" description="None">
>
>Determining IP information for eth0... done.
>Interface eth0 is down
>Bringing up interface eth0
>ifup eth0 returned 0
>Interface eth0 is RUNNING
>Checking via ping to 100.100.10.36... done
>100+0 records in
>100+0 records out
>13107200 bytes (13 MB) copied, 1.29991 seconds, 10.1 MB/s
>interface speed is 100 Mb/s
><summary>PASS</summary>
></output>
><output name="Info" description="None">
>Settings for eth0:
>	Supported ports: [ TP MII ]
>	Supported link modes:   10baseT/Half 10baseT/Full 
>	                        100baseT/Half 100baseT/Full 
>	Supports auto-negotiation: Yes
>	Advertised link modes:  10baseT/Half 10baseT/Full 
>	                        100baseT/Half 100baseT/Full 
>	Advertised auto-negotiation: Yes
>	Speed: 100Mb/s
>	Duplex: Full
>	Port: MII
>	PHYAD: 32
>	Transceiver: internal
>	Auto-negotiation: on
>	Supports Wake-on: pumbg
>	Wake-on: d
>	Current message level: 0x00000007 (7)
>	Link detected: yes
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: 8139cp
>desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+"
>network.hwaddr: 52:54:00:60:ce:e1
>vendorId: 10ec
>deviceId: 8139
>subVendorId: 1af4
>subDeviceId: 1100
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  3
>pcifn:  0
>eth0: RTL-8139C+ at 0xffffc20000016000, 52:54:00:60:ce:e1, IRQ 10
>
>+----------eth0 info start----------+
>+-----Speed-----+
>
>MAC Address: 52:54:00:60:CE:E1
>+-----Kudzu-----+
>
>+-----dmesg-----+
>
>+----------eth0 info end----------+
>
><summary>PASS</summary>
></output>
><output name="TCP" description="tcp latency and bandwidth test via lmbench">
>tcp test:
>TCP latency using 100.100.10.36: 0.3460 microseconds
>0.065536 20.43 MB/sec
>TCP latency using 100.100.10.36: 0.3425 microseconds
>0.065536 22.73 MB/sec
>TCP latency using 100.100.10.36: 0.3423 microseconds
>0.065536 21.21 MB/sec
>TCP latency using 100.100.10.36: 0.3420 microseconds
>0.065536 23.30 MB/sec
>TCP latency using 100.100.10.36: 0.3425 microseconds
>0.065536 19.94 MB/sec
>test cycle 1 of 5
>testing latency...
>TCP latency using 100.100.10.36: 0.3460 microseconds
>testing bandwidth to 100.100.10.36...
>0.065536 20.43 MB/sec
>test cycle 2 of 5
>testing latency...
>TCP latency using 100.100.10.36: 0.3425 microseconds
>testing bandwidth to 100.100.10.36...
>0.065536 22.73 MB/sec
>test cycle 3 of 5
>testing latency...
>TCP latency using 100.100.10.36: 0.3423 microseconds
>testing bandwidth to 100.100.10.36...
>0.065536 21.21 MB/sec
>test cycle 4 of 5
>testing latency...
>TCP latency using 100.100.10.36: 0.3420 microseconds
>testing bandwidth to 100.100.10.36...
>0.065536 23.30 MB/sec
>test cycle 5 of 5
>testing latency...
>TCP latency using 100.100.10.36: 0.3425 microseconds
>testing bandwidth to 100.100.10.36...
>0.065536 19.94 MB/sec
><summary>PASS</summary>
></output>
><output name="NFS" description="NFS file transfer test">
>testing nfs using 100.100.10.36...
>FS-Cache: Loaded
>mount: mount to NFS server '100.100.10.36' failed: timed out (retrying).
>mount.nfs: mount point /tmp/tmprDYBEVnfsdir is not a directory
>Copying 10 x 100 mbit files to/from 100.100.10.36
>mount -o rw,intr,rsize=12288,wsize=12288,udp 100.100.10.36:/var/v7/export /tmp/tmprDYBEVnfsdir
>Error: Mount command FAILED
>"mount -o rw,intr,rsize=12288,wsize=12288,udp 100.100.10.36:/var/v7/export /tmp/tmprDYBEVnfsdir" has output on stderr
><summary>FAIL</summary>
></output>
><output name="ICMP" description="None">
>PING 100.100.10.36 (100.100.10.36) 56(84) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 326ms
>
>rtt min/avg/max/mdev = 0.185/0.274/0.671/0.034 ms, ipg/ewma 0.326/0.280 ms
>
>PING 100.100.10.36 (100.100.10.36) 1(29) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 334ms
>
>, ipg/ewma 0.335/0.000 ms
>
>PING 100.100.10.36 (100.100.10.36) 240(268) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 330ms
>
>rtt min/avg/max/mdev = 0.135/0.275/0.616/0.037 ms, ipg/ewma 0.330/0.281 ms
>
>PING 100.100.10.36 (100.100.10.36) 256(284) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 365ms
>
>rtt min/avg/max/mdev = 0.234/0.296/2.149/0.067 ms, ipg/ewma 0.365/0.291 ms
>
>PING 100.100.10.36 (100.100.10.36) 1024(1052) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 446ms
>
>rtt min/avg/max/mdev = 0.312/0.373/2.604/0.081 ms, ipg/ewma 0.446/0.369 ms
>
>PING 100.100.10.36 (100.100.10.36) 2000(2028) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 581ms
>
>rtt min/avg/max/mdev = 0.408/0.519/1.104/0.052 ms, ipg/ewma 0.581/0.504 ms
>
>PING 100.100.10.36 (100.100.10.36) 10000(10028) bytes of data.
>
> 
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 1000 received, 0% packet loss, time 1077ms
>
>rtt min/avg/max/mdev = 0.688/0.979/3.989/0.109 ms, ipg/ewma 1.078/0.993 ms
>
>PING 100.100.10.36 (100.100.10.36) 40000(40028) bytes of data.
>
>..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 6 received, 99% packet loss, time 11679ms
>
>rtt min/avg/max/mdev = 23.877/34.232/39.960/6.687 ms, pipe 4, ipg/ewma 11.691/30.258 ms
>
>PING 100.100.10.36 (100.100.10.36) 65507(65535) bytes of data.
>
>........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
>
>--- 100.100.10.36 ping statistics ---
>
>1000 packets transmitted, 0 received, 100% packet loss, time 12537ms
>
>
>
><summary>PASS</summary>
></output>
>Restoring all interfaces...
>...finished running ./network.py, exit code=1
></output>
>recovered exit code=1
>v7-report-result /V7/v7/network FAIL /var/log/v7/runs/1/network/output.log 
>copying attachments...
>checking directory /tmp/v7-network-yXwm5h/mnt/tests/V7/v7/network 
>Skipping network.py
>Skipping test-result.xml
>Skipping runtest.sh
>Skipping testinfo.desc
>Skipping Makefile
>saveOutput: /var/log/v7/runs/1/network/output.log
>Warning: could not merge output XML, reading as text file.
>not well-formed (invalid token): line 126, column 1
>Return value was 0
>running info on 
>mkdir -p /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info
>cp -a testinfo.desc runtest.sh info.py Makefile /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info
>install -m 0755 runtest.sh /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info
>make OUTPUTFILE=/var/log/v7/runs/1/info/output.log RUNMODE=forced UDI= DEVICE= TESTSERVER=100.100.10.36 run
>chmod a+x ./runtest.sh ./info.py
>./runtest.sh
>/tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info/info.py
><output>
>Running ./info.py:
>Tested OS: Red Hat Enterprise Linux Server 5 (Tikanga)
>Kernel RPM: kernel-2.6.18-128.el5
>v7 version 1.1, release 23
><output name="Kernel" description="Check OS kernel build, version">
>+ rpm -ql kernel-2.6.18-128.el5
>Boot Parameters: ro root=/dev/VolGroup00/LogVol00 console=tty0 console=ttyS0, 115200
><summary>PASS</summary>
></output>
><output name="Verify v7" description="Verify the v7 installation">
><summary>PASS</summary>
></output>
><output name="Modules" description="Check kernel modules">
>checking modules...
><summary>PASS</summary>
></output>
><output name="System Report" description="generate system report">
>sosreport (version 1.7)
>Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
>process `cp' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.base_reachable_time; Use net.ipv6.neigh.eth0.base_reachable_time_ms instead.
>
>
>This utility will collect some detailed  information about the
>hardware and  setup of your  Red Hat Enterprise Linux  system.
>The information is collected and an archive is  packaged under
>/tmp, which you can send to a support representative.
>Red Hat will use this information for diagnostic purposes ONLY
>and it will be considered confidential information.
>
>This process may take a while to complete.
>No changes will be made to your system.
>
>Press ENTER to continue, or CTRL-C to quit.
>Please enter your first initial and last name [dhcp-65-79]: Please enter the case number that you are generating this report for:
>Creating compressed archive...
>
>Your sosreport has been generated and saved in:
>/tmp/sosreport-dhcp-65-79-573870-a79300.tar.bz2
>Copied sosreport -n selinux --no-progressbar /tmp/sosreport-dhcp-65-79-573870-a79300.tar.bz2 to /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info
># dmidecode 2.7
>SMBIOS 2.4 present.
>10 structures occupying 306 bytes.
>Table at 0x1FFFFEC0.
>
>Handle 0x0000, DMI type 0, 24 bytes.
>BIOS Information
>	Vendor: Seabios
>	Version: 0.5.1
>	Release Date: 01/01/2007
>	Address: 0xE8000
>	Runtime Size: 96 kB
>	ROM Size: 64 kB
>	Characteristics:
>		BIOS characteristics not supported
>		Targeted content distribution is supported
>	BIOS Revision: 1.0
>
>Handle 0x0100, DMI type 1, 27 bytes.
>System Information
>	Manufacturer: Red Hat
>	Product Name: KVM
>	Version: RHEL 6.1.0 PC
>	Serial Number: Not Specified
>	UUID: 6D95C6F5-2B1C-123A-2FC9-75774D3E90F2
>	Wake-up Type: Power Switch
>	SKU Number: Not Specified
>	Family: Red Hat Enterprise Linux
>
>Handle 0x0300, DMI type 3, 20 bytes.
>Chassis Information
>	Manufacturer: Red Hat
>	Type: Other
>	Lock: Not Present
>	Version: Not Specified
>	Serial Number: Not Specified
>	Asset Tag: Not Specified
>	Boot-up State: Safe
>	Power Supply State: Safe
>	Thermal State: Safe
>	Security Status: Unknown
>	OEM Information: 0x00000000
>
>Handle 0x0401, DMI type 4, 32 bytes.
>Processor Information
>	Socket Designation: CPU 1
>	Type: Central Processor
>	Family: Other
>	Manufacturer: Bochs
>	ID: D3 06 00 00 FD FB 8B 07
>	Version: Not Specified
>	Voltage: Unknown
>	External Clock: Unknown
>	Max Speed: 2000 MHz
>	Current Speed: 2000 MHz
>	Status: Populated, Enabled
>	Upgrade: Other
>	L1 Cache Handle: Not Provided
>	L2 Cache Handle: Not Provided
>	L3 Cache Handle: Not Provided
>
>Handle 0x1000, DMI type 16, 15 bytes.
>Physical Memory Array
>	Location: Other
>	Use: System Memory
>	Error Correction Type: Multi-bit ECC
>	Maximum Capacity: 512 MB
>	Error Information Handle: Not Provided
>	Number Of Devices: 1
>
>Handle 0x1100, DMI type 17, 21 bytes.
>Memory Device
>	Array Handle: 0x1000
>	Error Information Handle: 0x0000
>	Total Width: 64 bits
>	Data Width: 64 bits
>	Size: 512 MB
>	Form Factor: DIMM
>	Set: None
>	Locator: DIMM 0
>	Bank Locator: Not Specified
>	Type: RAM
>	Type Detail: None
>
>Handle 0x1300, DMI type 19, 15 bytes.
>Memory Array Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x0001FFFFFFF
>	Range Size: 512 MB
>	Physical Array Handle: 0x1000
>	Partition Width: 0
>
>Handle 0x1400, DMI type 20, 19 bytes.
>Memory Device Mapped Address
>	Starting Address: 0x00000000000
>	Ending Address: 0x0001FFFFFFF
>	Range Size: 512 MB
>	Physical Device Handle: 0x1100
>	Memory Array Mapped Address Handle: 0x1300
>	Partition Row Position: 1
>
>Handle 0x2000, DMI type 32, 11 bytes.
>System Boot Information
>	Status: No errors detected
>
>Handle 0x7F00, DMI type 127, 4 bytes.
>End Of Table
>
><summary>PASS</summary>
></output>
>...finished running ./info.py, exit code=0
></output>
>recovered exit code=0
>v7-report-result info PASS /var/log/v7/runs/1/info/output.log 
>copying attachments...
>checking directory /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info 
>Adding /tmp/v7-info-YHEZcX/mnt/tests/V7/v7/info/sosreport-dhcp-65-79-573870-a79300.tar.bz2
>copied attachment file sosreport-dhcp-65-79-573870-a79300.tar.bz2
>Skipping test-result.xml
>Skipping runtest.sh
>Skipping info.py
>Skipping testinfo.desc
>Skipping Makefile
>saveOutput: /var/log/v7/runs/1/info/output.log
>Return value was 0
>Are you sure you want to delete all test results? (y|n) response: y
>removing V7 logs ...
>removing V7 results...
>INIT: Switching to runlevel: 0
>INIT: Sending processes the TERM signal
>Shutting down Avahi daemon: [  OK  ]
>Stopping HAL daemon: [  OK  ]
>Stopping yum-updatesd: [  OK  ]
>Stopping anacron: [  OK  ]
>Stopping atd: [  OK  ]
>Stopping cups: [  OK  ]
>Shutting down console mouse services: [  OK  ]
>Stopping sshd: [  OK  ]
>Shutting down sm-client: [  OK  ]
>Shutting down sendmail: [  OK  ]
>Stopping acpi daemon: [  OK  ]
>Stopping crond: [  OK  ]
>Stopping autofs:  Stopping automount: [  OK  ]
>[  OK  ]
>Stopping system message bus: [  OK  ]
>Stopping RPC idmapd: [  OK  ]
>Stopping NFS statd: [  OK  ]
>Stopping mcstransd: [  OK  ]
>Stopping portmap: [  OK  ]
>Shutting down restorecond: [  OK  ]
>Stopping auditd: audit(1339016263.906:15): audit_pid=0 old=1647 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>[  OK  ]
>Stopping PC/SC smart card daemon (pcscd): [  OK  ]
>Shutting down kernel logger: [  OK  ]
>Shutting down system logger: [  OK  ]
>Shutting down hidd: [  OK  ]
>[  OK  ] Bluetooth services:[  OK  ]
>Shutting down interface eth0:  [  OK  ]
>Shutting down loopback interface:  [  OK  ]
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>Starting killall:  [  OK  ]
>Sending all processes the TERM signal... 
>Sending all processes the KILL signal... 
>Saving random seed:  
>Syncing hardware clock to system time type=1111 audit(1339016273.000:16): user pid=5111 uid=0 auid=4294967295 subj=system_u:system_r:hwclock_t:s0 msg='changing system time: exe="/sbin/hwclock" (hostname=?, addr=?, terminal=console res=success)'
>
>Turning off swap:  
>Turning off quotas:  
>Unmounting pipe file systems:  
>Unmounting file systems:  
>Halting system...
>md: stopping all md devices.
>Shutdown: hdb
>Shutdown: hda
>Power down.
>acpi_power_off called
>
>[root@w2k3-cert Desktop]# 
>

Actions: View

Attachments on bug 830199: 590450 | 590451