Attachment 590985 Details for Bug 830910 – smartctl all output /dev/sdb

smartctl all output /dev/sdb

smartd-sdb_20120611.txt (text/plain), 4.22 KB, created by Reilly Hall on 2012-06-11 16:50:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Reilly Hall

Created: 2012-06-11 16:50:51 UTC

Size: 4.22 KB

patch

obsolete

>smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.0-1.fc17.x86_64] (local build)
>Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Western Digital Raptor X
>Device Model:     WDC WD1500AHFD-00RAR1
>Serial Number:    WD-WMAP41603396
>Firmware Version: 20.07P20
>User Capacity:    150,039,945,216 bytes [150 GB]
>Sector Size:      512 bytes logical/physical
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   7
>ATA Standard is:  ATA/ATAPI-7 published, ANSI INCITS 397-2005
>Local Time is:    Mon Jun 11 12:44:31 2012 EDT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		( 4783) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  72) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   5) minutes.
>SCT capabilities: 	       (0x103f)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0007   171   168   021    Pre-fail  Always       -       4483
>  4 Start_Stop_Count        0x0032   097   097   040    Old_age   Always       -       3190
>  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000a   200   200   051    Old_age   Always       -       0
>  9 Power_On_Hours          0x0032   080   080   000    Old_age   Always       -       14965
> 10 Spin_Retry_Count        0x0012   100   100   051    Old_age   Always       -       0
> 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
> 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1550
>194 Temperature_Celsius     0x0022   104   097   000    Old_age   Always       -       43
>196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
>199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       0
>200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 830910: 590985