Attachment 592472 Details for Bug 832237 – Output of dmesg from an SSH session on the machine

Output of dmesg from an SSH session on the machine

dmesg (text/plain), 102.38 KB, created by Frederik Hertzum on 2012-06-17 20:44:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frederik Hertzum

Created: 2012-06-17 20:44:45 UTC

Size: 102.38 KB

patch

obsolete

>[    0.000000] Phyp-dump not supported on this hardware
>[    0.000000] Allocated 2097152 bytes for 1024 pacas at c00000000fe00000
>[    0.000000] DART table allocated at: c00000007f000000
>[    0.000000] Using PowerMac machine description
>[    0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12, vmemmap = 24
>[    0.000000] Found initrd at 0xc000000001840000:0xc000000002ed75ac
>[    0.000000] Found U3 memory controller & host bridge @ 0xf8000000 revision: 0xb3
>[    0.000000] Mapped at 0xd000080080000000
>[    0.000000] Found a K2 mac-io controller, rev: 96, mapped at 0xd000080080050000
>[    0.000000] PowerMac motherboard: PowerMac G5
>[    0.000000] DART IOMMU initialized for U3 type chipset
>[    0.000000] bootconsole [udbg0] enabled
>[    0.000000] CPU maps initialized for 1 thread per core
>[    0.000000]  (thread shift is 0)
>[    0.000000] Freed 2031616 bytes for unused pacas
>[    0.000000] Starting Linux PPC64 #1 SMP Mon May 14 10:18:37 MST 2012
>[    0.000000] -----------------------------------------------------
>[    0.000000] ppc64_pft_size                = 0x0
>[    0.000000] physicalMemorySize            = 0x100000000
>[    0.000000] htab_address                  = 0xc00000017c000000
>[    0.000000] htab_hash_mask                = 0x7ffff
>[    0.000000] -----------------------------------------------------
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.3.4-5.fc17.ppc64 (mockbuild@ppc-builder2.qa.fedoraproject.org) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 14 10:18:37 MST 2012
>[    0.000000] [boot]0012 Setup Arch
>[    0.000000] Top of RAM: 0x180000000, Total RAM: 0x100000000
>[    0.000000] Memory hole size: 2048MB
>[    0.000000] Found U3-AGP PCI host bridge.  Firmware bus number: 240->255
>[    0.000000] PCI host bridge /pci@0,f0000000  ranges:
>[    0.000000]  MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>[    0.000000]   IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
>[    0.000000]  MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000 
>[    0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
>[    0.000000] Found U3-HT PCI host bridge.  Firmware bus number: 0->239
>[    0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
>[    0.000000] via-pmu: Server Mode is disabled
>[    0.000000] PMU driver v2 initialized for Core99, firmware: 0c
>[    0.000000] nvram: Checking bank 0...
>[    0.000000] nvram: gen0=296, gen1=295
>[    0.000000] nvram: Active bank is: 0
>[    0.000000] nvram: OF partition at 0x410
>[    0.000000] nvram: XP partition at 0x1020
>[    0.000000] nvram: NR partition at 0x1120
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000000 -> 0x00018000
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] Early memory PFN ranges
>[    0.000000]     0: 0x00000000 -> 0x00008000
>[    0.000000]     0: 0x00010000 -> 0x00018000
>[    0.000000] On node 0 totalpages: 65536
>[    0.000000]   DMA zone: 84 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 65452 pages, LIFO batch:1
>[    0.000000] [boot]0015 Setup Done
>[    0.000000] PERCPU: Embedded 2 pages/cpu @c000000003100000 s84608 r0 d46464 u524288
>[    0.000000] pcpu-alloc: s84608 r0 d46464 u524288 alloc=1*1048576
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 65452
>[    0.000000] Policy zone: DMA
>[    0.000000] Kernel command line: ro root=live:CDLABEL=Fedora_17_ppc64 sshd
>[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
>[    0.000000] freeing bootmem node 0
>[    0.000000] Memory: 4048512k/4194304k available (17920k kernel code, 145792k reserved, 1856k data, 2952k bss, 6656k init)
>[    0.000000] SLUB: Genslabs=19, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=256
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:512 nr_irqs:512 16
>[    0.000000] mpic: Resetting
>[    0.000000] mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 2 CPUs
>[    0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
>[    0.000000] mpic: Initializing for 120 sources
>[    0.000000] mpic: Resetting
>[    0.000000] mpic: Setting up MPIC " MPIC 2   " version 1.2 at f8040000, max 2 CPUs
>[    0.000000] mpic: ISU size: 120, shift: 7, mask: 7f
>[    0.000000] mpic: Initializing for 120 sources
>[    0.000000] /u3@0,f8000000/mpic@f8040000: hooking up to IRQ 56
>[    0.000000] time_init: decrementer frequency = 33.333333 MHz
>[    0.000000] time_init: processor frequency   = 1800.000000 MHz
>[    0.000000] clocksource: timebase mult[1e000005] shift[24] registered
>[    0.000000] clockevent: decrementer mult[8888887] shift[32] cpu[0]
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled, bootconsole disabled
>[    0.000000] allocated 1048576 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.010393] pid_max: default: 32768 minimum: 301
>[    0.010559] Security Framework initialized
>[    0.010586] SELinux:  Initializing.
>[    0.010648] SELinux:  Starting in permissive mode
>[    0.010992] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
>[    0.016349] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
>[    0.018982] Mount-cache hash table entries: 4096
>[    0.024441] Initializing cgroup subsys cpuacct
>[    0.024463] Initializing cgroup subsys memory
>[    0.024841] Initializing cgroup subsys devices
>[    0.024854] Initializing cgroup subsys freezer
>[    0.024864] Initializing cgroup subsys net_cls
>[    0.024874] Initializing cgroup subsys blkio
>[    0.024894] Initializing cgroup subsys perf_event
>[    0.025037] ftrace: allocating 21118 entries in 8 pages
>[    0.054816] PowerMac SMP probe found 2 cpus
>[    0.054985] KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000
>[    0.055000]  channel 0 bus <multibus>
>[    0.055009]  channel 1 bus <multibus>
>[    0.055057] KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@1/mac-io@7/i2c@18000
>[    0.055073]  channel 0 bus <multibus>
>[    0.055095] PMU i2c /ht@0,f2000000/pci@1/mac-io@7/via-pmu@16000/pmu-i2c
>[    0.055113]  channel 1 bus <multibus>
>[    0.055126]  channel 2 bus <multibus>
>[    0.055222] Processor timebase sync using Cypress i2c clock
>[    0.055237] mpic: requesting IPIs...
>[    0.055299] PPC970/FX/MP performance monitor hardware support registered
>[    0.174227] Brought up 2 CPUs
>[    0.177064] devtmpfs: initialized
>[    0.195825] atomic64 test passed
>[    0.196074] NET: Registered protocol family 16
>[    0.196109] IBM eBus Device Driver
>[    0.196650] CPU Hotplug not supported by firmware - disabling.
>[    0.199314] PCI: Probing PCI hardware
>[    0.199464] PCI host bridge to bus 0000:f0
>[    0.199480] pci_bus 0000:f0: root bus resource [io  0x10000-0x80ffff]
>[    0.199494] pci_bus 0000:f0: root bus resource [mem 0xf1000000-0xf1ffffff]
>[    0.199509] pci_bus 0000:f0: root bus resource [mem 0x90000000-0x9fffffff]
>[    0.199561] pci 0000:f0:0b.0: [106b:004b] type 0 class 0x000600
>[    0.199689] pci 0000:f0:10.0: [10de:0321] type 0 class 0x000300
>[    0.199718] pci 0000:f0:10.0: reg 10: [mem 0x91000000-0x91ffffff]
>[    0.199733] pci 0000:f0:10.0: reg 14: [mem 0x98000000-0x9fffffff pref]
>[    0.199785] pci 0000:f0:10.0: reg 30: [mem 0x90000000-0x9001ffff pref]
>[    0.252795] IOMMU table initialized, virtual merging enabled
>[    0.253127] PCI host bridge to bus 0001:00
>[    0.253142] pci_bus 0001:00: root bus resource [io  0x820000-0xc1ffff]
>[    0.253156] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
>[    0.253171] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
>[    0.253185] pci_bus 0001:00: root bus resource [mem 0xa0000000-0xefffffff]
>[    0.253222] pci 0001:00:00.0: [106b:004a] type 0 class 0x000600
>[    0.253281] pci 0001:00:01.0: [106b:0045] type 1 class 0x000604
>[    0.253389] pci 0001:00:02.0: [106b:0046] type 1 class 0x000604
>[    0.253466] pci 0001:00:03.0: [106b:0047] type 1 class 0x000604
>[    0.253547] pci 0001:00:04.0: [106b:0048] type 1 class 0x000604
>[    0.253627] pci 0001:00:05.0: [106b:0049] type 1 class 0x000604
>[    0.253779] pci 0001:01:07.0: [106b:0041] type 0 class 0x00ff00
>[    0.253794] pci 0001:01:07.0: reg 10: [mem 0x80000000-0x8007ffff]
>[    0.253863] pci 0001:01:08.0: [106b:0040] type 0 class 0x000c03
>[    0.253879] pci 0001:01:08.0: reg 10: [mem 0x80081000-0x80081fff]
>[    0.253948] pci 0001:01:09.0: [106b:0040] type 0 class 0x000c03
>[    0.253964] pci 0001:01:09.0: reg 10: [mem 0x80080000-0x80080fff]
>[    0.254033] pci 0001:00:01.0: PCI bridge to [bus 01-01]
>[    0.254053] pci 0001:00:01.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.254172] pci 0001:05:04.0: [1814:0601] type 0 class 0x000280
>[    0.254193] pci 0001:05:04.0: reg 10: [mem 0x80710000-0x8071ffff]
>[    0.254317] pci 0001:05:0b.0: [1033:0035] type 0 class 0x000c03
>[    0.254338] pci 0001:05:0b.0: reg 10: [mem 0x80702000-0x80702fff]
>[    0.254408] pci 0001:05:0b.0: supports D1 D2
>[    0.254414] pci 0001:05:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.254449] pci 0001:05:0b.1: [1033:0035] type 0 class 0x000c03
>[    0.254469] pci 0001:05:0b.1: reg 10: [mem 0x80701000-0x80701fff]
>[    0.254539] pci 0001:05:0b.1: supports D1 D2
>[    0.254544] pci 0001:05:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.254578] pci 0001:05:0b.2: [1033:00e0] type 0 class 0x000c03
>[    0.254598] pci 0001:05:0b.2: reg 10: [mem 0x80700000-0x807000ff]
>[    0.254668] pci 0001:05:0b.2: supports D1 D2
>[    0.254674] pci 0001:05:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.254705] pci 0001:00:02.0: PCI bridge to [bus 05-05]
>[    0.254725] pci 0001:00:02.0:   bridge window [mem 0x80700000-0x807fffff]
>[    0.254869] pci 0001:02:0d.0: [106b:0043] type 0 class 0x00ff00
>[    0.254883] pci 0001:02:0d.0: reg 10: [mem 0x80104000-0x80107fff]
>[    0.254953] pci 0001:02:0e.0: [106b:0042] type 0 class 0x000c00
>[    0.254972] pci 0001:02:0e.0: reg 10: [mem 0x80100000-0x80100fff]
>[    0.255037] pci 0001:02:0e.0: supports D1 D2
>[    0.255042] pci 0001:02:0e.0: PME# supported from D0 D1 D2 D3hot
>[    0.255067] pci 0001:00:03.0: PCI bridge to [bus 02-02]
>[    0.255086] pci 0001:00:03.0:   bridge window [mem 0x80100000-0x801fffff]
>[    0.255184] pci 0001:03:0f.0: [106b:004c] type 0 class 0x000200
>[    0.255200] pci 0001:03:0f.0: reg 10: [mem 0x80400000-0x805fffff]
>[    0.255239] pci 0001:03:0f.0: reg 30: [mem 0x80200000-0x802fffff pref]
>[    0.255268] pci 0001:00:04.0: PCI bridge to [bus 03-03]
>[    0.255287] pci 0001:00:04.0:   bridge window [mem 0x80200000-0x805fffff]
>[    0.255364] pci 0001:04:0c.0: [1166:0240] type 0 class 0x000101
>[    0.255379] pci 0001:04:0c.0: reg 10: [io  0x0000-0x0007]
>[    0.255390] pci 0001:04:0c.0: reg 14: [io  0x0000-0x0003]
>[    0.255401] pci 0001:04:0c.0: reg 18: [io  0x0000-0x0007]
>[    0.255412] pci 0001:04:0c.0: reg 1c: [io  0x0000-0x0003]
>[    0.255423] pci 0001:04:0c.0: reg 20: [io  0x0000-0x000f]
>[    0.255434] pci 0001:04:0c.0: reg 24: [mem 0x80600000-0x80601fff]
>[    0.255480] pci 0001:00:05.0: PCI bridge to [bus 04-04]
>[    0.255500] pci 0001:00:05.0:   bridge window [mem 0x80600000-0x806fffff]
>[    0.257060] PCI: max bus depth: 1 pci_try_num: 2
>[    0.257104] pci 0001:00:01.0: PCI bridge to [bus 01-01]
>[    0.257122] pci 0001:00:01.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.257140] pci 0001:00:02.0: PCI bridge to [bus 05-05]
>[    0.257154] pci 0001:00:02.0:   bridge window [mem 0x80700000-0x807fffff]
>[    0.257172] pci 0001:00:03.0: PCI bridge to [bus 02-02]
>[    0.257188] pci 0001:00:03.0:   bridge window [mem 0x80100000-0x801fffff]
>[    0.257206] pci 0001:00:04.0: PCI bridge to [bus 03-03]
>[    0.257220] pci 0001:00:04.0:   bridge window [mem 0x80200000-0x805fffff]
>[    0.257238] pci 0001:00:05.0: PCI bridge to [bus 04-04]
>[    0.257252] pci 0001:00:05.0:   bridge window [mem 0x80600000-0x806fffff]
>[    0.257291] pci_bus 0000:f0: resource 4 [io  0x10000-0x80ffff]
>[    0.257296] pci_bus 0000:f0: resource 5 [mem 0xf1000000-0xf1ffffff]
>[    0.257302] pci_bus 0000:f0: resource 6 [mem 0x90000000-0x9fffffff]
>[    0.257309] pci_bus 0001:00: resource 4 [io  0x820000-0xc1ffff]
>[    0.257315] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
>[    0.257321] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
>[    0.257327] pci_bus 0001:00: resource 7 [mem 0xa0000000-0xefffffff]
>[    0.257332] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
>[    0.257339] pci_bus 0001:05: resource 1 [mem 0x80700000-0x807fffff]
>[    0.257345] pci_bus 0001:02: resource 1 [mem 0x80100000-0x801fffff]
>[    0.257352] pci_bus 0001:03: resource 1 [mem 0x80200000-0x805fffff]
>[    0.257358] pci_bus 0001:04: resource 1 [mem 0x80600000-0x806fffff]
>[    0.257363] PCI: Probing PCI hardware done
>[    0.262383] opal: Node not found
>[    0.264963] bio: create slab <bio-0> at 0
>[    0.265430] vgaarb: device added: PCI:0000:f0:10.0,decodes=io+mem,owns=mem,locks=none
>[    0.265494] vgaarb: loaded
>[    0.265502] vgaarb: bridge control possible 0000:f0:10.0
>[    0.265684] SCSI subsystem initialized
>[    0.265841] libata version 3.00 loaded.
>[    0.265973] usbcore: registered new interface driver usbfs
>[    0.266010] usbcore: registered new interface driver hub
>[    0.266112] usbcore: registered new device driver usb
>[    0.266611] NetLabel: Initializing
>[    0.266626] NetLabel:  domain hash size = 128
>[    0.266636] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.266673] NetLabel:  unlabeled traffic allowed by default
>[    0.266824] Switching to clocksource timebase
>[    0.299442] NET: Registered protocol family 2
>[    0.299581] IP route cache hash table entries: 32768 (order: 2, 262144 bytes)
>[    0.300274] TCP established hash table entries: 131072 (order: 5, 2097152 bytes)
>[    0.302876] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
>[    0.304945] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.304969] TCP reno registered
>[    0.305004] UDP hash table entries: 2048 (order: 0, 65536 bytes)
>[    0.305111] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
>[    0.305412] NET: Registered protocol family 1
>[    0.305481] PCI: CLS mismatch (32 != 64), using 128 bytes
>[    0.305517] pci 0001:01:08.0: enabling device (0000 -> 0002)
>[    0.356942] pci 0001:01:09.0: enabling device (0000 -> 0002)
>[    0.416913] pci 0001:05:0b.0: enabling device (0000 -> 0002)
>[    0.476904] pci 0001:05:0b.1: enabling device (0000 -> 0002)
>[    0.536905] pci 0001:05:0b.2: enabling device (0004 -> 0006)
>[    0.537089] Unpacking initramfs...
>[    8.529280] Freeing initrd memory: 23168k freed
>[    8.530164] rtas_flash: no firmware flash support
>[    8.586975] Registering G5 CPU frequency driver
>[    8.587000] Frequency method: i2c/pfunc, Voltage method: i2c/pfunc
>[    8.587013] Low: 1310 Mhz, High: 1800 Mhz, Cur: 1310 MHz
>[    8.587693] ondemand governor failed, too long transition latency of HW, fallback to performance governor
>[    8.627452] audit: initializing netlink socket (disabled)
>[    8.627564] type=2000 audit(1339965276.509:1): initialized
>[    8.782840] HugeTLB registered 16 MB page size, pre-allocated 0 pages
>[    8.786693] VFS: Disk quotas dquot_6.5.2
>[    8.786861] Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
>[    8.788016] msgmni has been set to 7952
>[    8.788197] SELinux:  Registering netfilter hooks
>[    8.789152] alg: No test for stdrng (krng)
>[    8.789177] NET: Registered protocol family 38
>[    8.789308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    8.789384] io scheduler noop registered
>[    8.789393] io scheduler deadline registered
>[    8.789516] io scheduler cfq registered (default)
>[    8.789719] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    8.789890] Using unsupported 1680x1050 NVDA,Display-B at 98004000, depth=8, pitch=2048
>[    8.823239] Console: switching to colour frame buffer device 210x65
>[    8.856172] fb0: Open Firmware frame buffer device on /pci@0,f0000000/NVDA,Parent@10/NVDA,Display-B@1
>[    8.856700] vio_register_driver: driver hvc_console registering
>[    8.856719] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    8.857554] Linux agpgart interface v0.103
>[    8.857722] agpgart-uninorth 0000:f0:0b.0: Apple U3 chipset
>[    8.863281] agpgart-uninorth 0000:f0:0b.0: configuring for size idx: 64
>[    8.863631] agpgart-uninorth 0000:f0:0b.0: AGP aperture is 256M @ 0x0
>[    8.865387] loop: module loaded
>[    8.865590] MacIO PCI driver attached to K2 chipset
>[    8.866830] Uniform Multi-Platform E-IDE driver
>[    8.867134] ide-gd driver 1.18
>[    8.867486] Fixed MDIO Bus: probed
>[    8.867727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    8.867978] ehci_hcd 0001:05:0b.2: EHCI Host Controller
>[    8.868223] ehci_hcd 0001:05:0b.2: new USB bus registered, assigned bus number 1
>[    8.896918] ehci_hcd 0001:05:0b.2: irq 63, io mem 0x80700000
>[    8.916896] ehci_hcd 0001:05:0b.2: USB 2.0 started, EHCI 1.00
>[    8.917116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    8.917316] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.917527] usb usb1: Product: EHCI Host Controller
>[    8.917670] usb usb1: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ehci_hcd
>[    8.917858] usb usb1: SerialNumber: 0001:05:0b.2
>[    8.918245] hub 1-0:1.0: USB hub found
>[    8.918364] hub 1-0:1.0: 5 ports detected
>[    8.918685] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    8.918927] ohci_hcd 0001:01:08.0: OHCI Host Controller
>[    8.919195] ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2
>[    8.919521] ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000
>[    8.996745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    8.996968] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    8.997181] usb usb2: Product: OHCI Host Controller
>[    8.997324] usb usb2: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd
>[    8.997513] usb usb2: SerialNumber: 0001:01:08.0
>[    8.997885] hub 2-0:1.0: USB hub found
>[    8.998007] hub 2-0:1.0: 2 ports detected
>[    8.998281] ohci_hcd 0001:01:09.0: OHCI Host Controller
>[    8.998543] ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3
>[    8.998867] ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000
>[    9.076723] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.076932] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.077144] usb usb3: Product: OHCI Host Controller
>[    9.084991] usb usb3: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd
>[    9.092924] usb usb3: SerialNumber: 0001:01:09.0
>[    9.101151] hub 3-0:1.0: USB hub found
>[    9.109057] hub 3-0:1.0: 2 ports detected
>[    9.117083] ohci_hcd 0001:05:0b.0: OHCI Host Controller
>[    9.125008] ohci_hcd 0001:05:0b.0: new USB bus registered, assigned bus number 4
>[    9.132938] ohci_hcd 0001:05:0b.0: irq 63, io mem 0x80702000
>[    9.216752] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.224525] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.232301] usb usb4: Product: OHCI Host Controller
>[    9.240015] usb usb4: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd
>[    9.247764] usb usb4: SerialNumber: 0001:05:0b.0
>[    9.247818] hub 1-0:1.0: unable to enumerate USB device on port 1
>[    9.263415] hub 4-0:1.0: USB hub found
>[    9.271092] hub 4-0:1.0: 3 ports detected
>[    9.278889] ohci_hcd 0001:05:0b.1: OHCI Host Controller
>[    9.286622] ohci_hcd 0001:05:0b.1: new USB bus registered, assigned bus number 5
>[    9.294353] ohci_hcd 0001:05:0b.1: irq 63, io mem 0x80701000
>[    9.376731] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    9.384476] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    9.392278] usb usb5: Product: OHCI Host Controller
>[    9.400038] usb usb5: Manufacturer: Linux 3.3.4-5.fc17.ppc64 ohci_hcd
>[    9.407816] usb usb5: SerialNumber: 0001:05:0b.1
>[    9.415732] hub 5-0:1.0: USB hub found
>[    9.423346] hub 5-0:1.0: 2 ports detected
>[    9.430924] uhci_hcd: USB Universal Host Controller Interface driver
>[    9.438480] usbcore: registered new interface driver usbserial
>[    9.445896] USB Serial support registered for generic
>[    9.453328] usbcore: registered new interface driver usbserial_generic
>[    9.460872] usbserial: USB Serial Driver core
>[    9.468717] mousedev: PS/2 mouse device common for all mice
>[    9.476869] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
>[    9.484724] device-mapper: uevent: version 1.0.3
>[    9.492525] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>[    9.500710] usbcore: registered new interface driver usbhid
>[    9.508597] usbhid: USB HID core driver
>[    9.516543] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    9.524416] TCP cubic registered
>[    9.532225] Initializing XFRM netlink socket
>[    9.540305] NET: Registered protocol family 10
>[    9.548434] Mobile IPv6
>[    9.556117] NET: Registered protocol family 17
>[    9.563858] Registering the dns_resolver key type
>[    9.571580] Running MSI bitmap self-tests ...
>[    9.573645] PM: Registered nosave memory: 000000007f000000 - 0000000080000000
>[    9.581691] PM: Hibernation image not present or could not be loaded.
>[    9.581723] registered taskstats version 1
>[    9.589952] input: PMU as /devices/virtual/input/input0
>[    9.597954] Registered led device: pmu-led::front
>[    9.598254] rtc-generic rtc-generic: setting system clock to 2012-06-17 20:34:38 UTC (1339965278)
>[    9.606352] Initializing network drop monitor service
>[    9.619814] Freeing unused kernel memory: 6656k freed
>[    9.686984] usb 4-1: new full-speed USB device number 2 using ohci_hcd
>[    9.923963] usb 4-1: New USB device found, idVendor=05ac, idProduct=1001
>[    9.932180] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    9.940307] usb 4-1: Product: Hub in Apple USB Keyboard
>[    9.948408] usb 4-1: Manufacturer: Alps Electric
>[    9.958021] hub 4-1:1.0: USB hub found
>[    9.967934] hub 4-1:1.0: 3 ports detected
>[   10.211378] dracut: dracut-018-35.git20120510.fc17
>[   10.279069] usb 4-1.1: new low-speed USB device number 3 using ohci_hcd
>[   10.336401] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[   10.352280] Loading iSCSI transport class v2.0-870.
>[   10.363760] iscsi: registered transport (tcp)
>[   10.378165] alua: device handler registered
>[   10.392622] emc: device handler registered
>[   10.407035] hp_sw: device handler registered
>[   10.421536] rdac: device handler registered
>[   10.438976] usb 4-1.1: New USB device found, idVendor=05ac, idProduct=0202
>[   10.447061] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   10.455107] usb 4-1.1: Product: Apple USB Keyboard
>[   10.463194] usb 4-1.1: Manufacturer: Alps Electric
>[   10.480418] input: Alps Electric Apple USB Keyboard as /devices/pci0001:00/0001:00:02.0/0001:05:0b.0/usb4/4-1/4-1.1/4-1.1:1.0/input/input1
>[   10.480732] generic-usb 0003:05AC:0202.0001: input,hidraw0: USB HID v1.00 Keyboard [Alps Electric Apple USB Keyboard] on usb-0001:05:0b.0-1.1/input0
>[   10.538299] md: raid0 personality registered for level 0
>[   10.553728] md: raid1 personality registered for level 1
>[   10.568761] async_tx: api initialized (async)
>[   10.577951] xor: measuring software checksum speed
>[   10.578959] usb 4-1.2: new low-speed USB device number 4 using ohci_hcd
>[   10.636879]    8regs     :  4198.400 MB/sec
>[   10.686877]    8regs_prefetch:  4492.800 MB/sec
>[   10.704936] usb 4-1.2: New USB device found, idVendor=04fc, idProduct=0003
>[   10.713650] usb 4-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[   10.722282] usb 4-1.2: Product: USB Wheel Mouse
>[   10.736878]    32regs    :  4211.200 MB/sec
>[   10.741259] input: USB Wheel Mouse as /devices/pci0001:00/0001:00:02.0/0001:05:0b.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input2
>[   10.741493] generic-usb 0003:04FC:0003.0002: input,hidraw1: USB HID v1.00 Mouse [USB Wheel Mouse] on usb-0001:05:0b.0-1.2/input0
>[   10.806882]    32regs_prefetch:  4569.600 MB/sec
>[   10.815901] xor: using function: 32regs_prefetch (4569.600 MB/sec)
>[   10.986889] raid6: int64x1   1955 MB/s
>[   11.156903] raid6: int64x2   3242 MB/s
>[   11.326893] raid6: int64x4   3231 MB/s
>[   11.496899] raid6: int64x8   1442 MB/s
>[   11.666898] raid6: altivecx1  3892 MB/s
>[   11.836886] raid6: altivecx2  4065 MB/s
>[   12.006876] raid6: altivecx4  4171 MB/s
>[   12.176902] raid6: altivecx8  4585 MB/s
>[   12.185208] raid6: using algorithm altivecx8 (4585 MB/s)
>[   12.196928] md: raid6 personality registered for level 6
>[   12.205131] md: raid5 personality registered for level 5
>[   12.213226] md: raid4 personality registered for level 4
>[   12.239541] md: raid10 personality registered for level 10
>[   12.253892] md: linear personality registered for level -1
>[   12.291221] device-mapper: multipath: version 1.3.0 loaded
>[   12.305474] device-mapper: multipath round-robin: version 1.0.0 loaded
>[   12.582511] dracut: livenet: no url handler for CDLABEL=Fedora_17_ppc64
>[   12.597581] dracut: rd.luks=0: removing cryptoluks activation
>[   12.632281] dracut: root was live:CDLABEL=Fedora_17_ppc64, is now live:/dev/disk/by-label/Fedora_17_ppc64
>[   12.651323] dracut: rd.lvm=0: removing LVM activation
>[   12.775602] RPC: Registered named UNIX socket transport module.
>[   12.783859] RPC: Registered udp transport module.
>[   12.791887] RPC: Registered tcp transport module.
>[   12.799827] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   12.909480] udevd[222]: starting version 182
>[   12.943864] dracut: rd.dm=0: removing DM RAID activation
>[   12.979669] dracut: rd.md=0: removing MD RAID activation
>[   13.254066] pata-pci-macio 0001:02:0d.0: enabling device (0010 -> 0012)
>[   13.261889] sungem.c:v1.0 David S. Miller <davem@redhat.com>
>[   13.264357] gem 0001:03:0f.0: eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0d:93:56:9a:14
>[   13.268618] sata_svw 0001:04:0c.0: version 2.3
>[   13.278500] scsi0 : sata_svw
>[   13.286983] scsi1 : sata_svw
>[   13.295162] scsi2 : sata_svw
>[   13.303106] pata-pci-macio 0001:02:0d.0: Activating pata-macio chipset K2 ATA-6, Apple bus ID 3
>[   13.311841] scsi4 : pata_macio
>[   13.319924] scsi3 : sata_svw
>[   13.328024] ata5: PATA max UDMA/100 irq 39
>[   13.336236] ata1: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600000 irq 16
>[   13.344358] ata2: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600100 irq 16
>[   13.352392] ata3: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600200 irq 16
>[   13.360282] ata4: SATA max UDMA/133 mmio m8192@0x80600000 port 0x80600300 irq 16
>[   13.369306] firewire_ohci 0001:02:0e.0: enabling device (0000 -> 0002)
>[   13.437141] firewire_ohci: Added fw-ohci device 0001:02:0e.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
>[   13.507426] ata5.00: ATAPI: PIONEER DVD-RW  DVR-117D, B705, max UDMA/66
>[   13.527434] ata5.00: configured for UDMA/66
>[   13.542255] scsi 4:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-117D B705 PQ: 0 ANSI: 5
>[   13.550021] ata5.00: K2/Shasta alignment limits applied
>[   13.565720] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
>[   13.573399] cdrom: Uniform CD-ROM driver Revision: 3.20
>[   13.583182] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[   13.583570] sr 4:0:0:0: Attached scsi generic sg0 type 5
>[   13.736930] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   13.757413] ata1.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
>[   13.765124] ata1.00: 160086528 sectors, multi 0: LBA48 
>[   13.807380] ata1.00: configured for UDMA/133
>[   13.815259] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>[   13.823458] sd 0:0:0:0: Attached scsi generic sg1 type 0
>[   13.823554] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
>[   13.823656] sd 0:0:0:0: [sda] Write Protect is off
>[   13.823661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   13.823703] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   13.871471]  sda: [mac] sda1 sda2 sda3 sda4
>[   13.880086] sd 0:0:0:0: [sda] Attached SCSI disk
>[   13.937147] firewire_core: created device fw0: GUID 000d93fffe569a14, S800
>[   14.196938] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   14.217284] ata2.00: ATA-7: WDC WD1600JS-75NCB3, 10.02E04, max UDMA/133
>[   14.224706] ata2.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[   14.247296] ata2.00: configured for UDMA/133
>[   14.255102] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1600JS-75N 10.0 PQ: 0 ANSI: 5
>[   14.263559] sd 1:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
>[   14.263748] sd 1:0:0:0: Attached scsi generic sg2 type 0
>[   14.279603] sd 1:0:0:0: [sdb] Write Protect is off
>[   14.287663] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[   14.287712] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   14.309298]  sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7
>[   14.318729] sd 1:0:0:0: [sdb] Attached SCSI disk
>[   14.637774] ata3: SATA link down (SStatus 4 SControl 300)
>[   14.997774] ata4: SATA link down (SStatus 4 SControl 300)
>[   17.007600] ISO 9660 Extensions: Microsoft Joliet Level 3
>[   17.077041] ISO 9660 Extensions: RRIP_1991A
>[   18.849316] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[   19.107876] dracut: Mounted root filesystem /dev/mapper/live-rw
>[   20.563883] dracut: Switching root
>[   24.745822] SELinux: 2048 avtab hash slots, 99000 rules.
>[   24.780389] SELinux: 2048 avtab hash slots, 99000 rules.
>[   25.277512] SELinux:  9 users, 15 roles, 4112 types, 222 bools, 1 sens, 1024 cats
>[   25.277522] SELinux:  83 classes, 99000 rules
>[   25.287460] SELinux:  Permission ptrace_child in class process not defined in policy.
>[   25.296430] SELinux: the above unknown classes and permissions will be allowed
>[   25.305129] SELinux:  Completing initialization.
>[   25.305133] SELinux:  Setting up existing superblocks.
>[   25.305154] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[   25.305166] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[   25.305177] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[   25.305193] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   25.305219] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   25.305246] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[   25.306486] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[   25.306502] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[   25.310441] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[   25.310461] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[   25.310470] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[   25.310506] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[   25.310520] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   25.310539] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[   25.310593] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[   25.313069] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   25.313098] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   25.320809] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>[   25.320829] SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>[   25.320859] SELinux: initialized (dev loop0, type squashfs), uses xattr
>[   25.320906] SELinux: initialized (dev dm-0, type ext4), uses xattr
>[   25.541560] type=1403 audit(1339965294.429:2): policy loaded auid=4294967295 ses=4294967295
>[   26.134951] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   26.197044] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.517054] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.597038] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.677036] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.756987] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.836978] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.917331] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   26.967009] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   27.046972] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[   29.580145] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[   32.210498] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   32.452292] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[   32.822748] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[   32.922247] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[   33.684974] udevd[425]: starting version 182
>[   34.754618] EXT4-fs (dm-0): re-mounted. Opts: user_xattr,barrier=1,data=ordered
>[   35.217584] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   35.665283] PowerMac i2c bus pmu 2 registered
>[   35.665341] PowerMac i2c bus pmu 1 registered
>[   35.665387] PowerMac i2c bus mac-io 0 registered
>[   35.665431] PowerMac i2c bus u3 1 registered
>[   35.665475] PowerMac i2c bus u3 0 registered
>[   36.059237] temperature temperature: PowerMac G5 Thermal control driver 1.3
>[   36.059269] Detected fan controls:
>[   36.059273]   0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN
>[   36.059276]   1: RPM fan, id 2, location: DRIVE BAY
>[   36.059280]   2: PWM fan, id 2, location: SLOT,PCI FAN
>[   36.059284]   3: RPM fan, id 3, location: CPU A INTAKE
>[   36.059287]   4: RPM fan, id 4, location: CPU A EXHAUST
>[   36.059291]   5: RPM fan, id 5, location: CPU B INTAKE
>[   36.059294]   6: RPM fan, id 6, location: CPU B EXHAUST
>[   36.059341] i2c i2c-0: therm_pm72: attach_adapter method is deprecated
>[   36.059346] i2c i2c-0: Please use another way to instantiate your i2c_client
>[   36.059351] i2c i2c-1: therm_pm72: attach_adapter method is deprecated
>[   36.059355] i2c i2c-1: Please use another way to instantiate your i2c_client
>[   36.059360] i2c i2c-2: therm_pm72: attach_adapter method is deprecated
>[   36.059363] i2c i2c-2: Please use another way to instantiate your i2c_client
>[   36.059368] i2c i2c-3: therm_pm72: attach_adapter method is deprecated
>[   36.059372] i2c i2c-3: Please use another way to instantiate your i2c_client
>[   36.059434] i2c i2c-4: therm_pm72: attach_adapter method is deprecated
>[   36.059438] i2c i2c-4: Please use another way to instantiate your i2c_client
>[   36.072902] FCU Initialized, RPM fan shift is 3
>[   36.079824] [drm] Initialized drm 1.1.0 20060810
>[   36.243482] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>[   36.243654] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>[   36.244885] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>[   37.605037] attempt to access beyond end of device
>[   37.605047] loop0: rw=0, want=285322, limit=285320
>[   37.605052] Buffer I/O error on device loop0, logical block 142660
>[   37.605056] attempt to access beyond end of device
>[   37.605060] loop0: rw=0, want=285324, limit=285320
>[   37.605064] Buffer I/O error on device loop0, logical block 142661
>[   37.605068] attempt to access beyond end of device
>[   37.605071] loop0: rw=0, want=285326, limit=285320
>[   37.605075] Buffer I/O error on device loop0, logical block 142662
>[   37.605079] attempt to access beyond end of device
>[   37.605083] loop0: rw=0, want=285328, limit=285320
>[   37.605086] Buffer I/O error on device loop0, logical block 142663
>[   37.605090] attempt to access beyond end of device
>[   37.605094] loop0: rw=0, want=285330, limit=285320
>[   37.605098] Buffer I/O error on device loop0, logical block 142664
>[   37.605102] attempt to access beyond end of device
>[   37.605106] loop0: rw=0, want=285332, limit=285320
>[   37.605109] Buffer I/O error on device loop0, logical block 142665
>[   37.605113] attempt to access beyond end of device
>[   37.605117] loop0: rw=0, want=285334, limit=285320
>[   37.605120] Buffer I/O error on device loop0, logical block 142666
>[   37.605124] attempt to access beyond end of device
>[   37.605128] loop0: rw=0, want=285336, limit=285320
>[   37.605132] Buffer I/O error on device loop0, logical block 142667
>[   37.605136] attempt to access beyond end of device
>[   37.605139] loop0: rw=0, want=285338, limit=285320
>[   37.605143] Buffer I/O error on device loop0, logical block 142668
>[   37.605147] attempt to access beyond end of device
>[   37.605151] loop0: rw=0, want=285340, limit=285320
>[   37.605155] attempt to access beyond end of device
>[   37.605159] loop0: rw=0, want=285342, limit=285320
>[   37.605163] attempt to access beyond end of device
>[   37.605166] loop0: rw=0, want=285344, limit=285320
>[   37.605170] attempt to access beyond end of device
>[   37.605174] loop0: rw=0, want=285346, limit=285320
>[   37.605178] attempt to access beyond end of device
>[   37.605182] loop0: rw=0, want=285348, limit=285320
>[   37.605186] attempt to access beyond end of device
>[   37.605189] loop0: rw=0, want=285350, limit=285320
>[   37.605194] attempt to access beyond end of device
>[   37.605197] loop0: rw=0, want=285352, limit=285320
>[   37.605201] attempt to access beyond end of device
>[   37.605205] loop0: rw=0, want=285354, limit=285320
>[   37.605209] attempt to access beyond end of device
>[   37.605213] loop0: rw=0, want=285356, limit=285320
>[   37.605217] attempt to access beyond end of device
>[   37.605220] loop0: rw=0, want=285358, limit=285320
>[   37.605224] attempt to access beyond end of device
>[   37.605228] loop0: rw=0, want=285360, limit=285320
>[   37.605232] attempt to access beyond end of device
>[   37.605236] loop0: rw=0, want=285362, limit=285320
>[   37.605240] attempt to access beyond end of device
>[   37.605243] loop0: rw=0, want=285364, limit=285320
>[   37.605247] attempt to access beyond end of device
>[   37.605251] loop0: rw=0, want=285366, limit=285320
>[   37.605255] attempt to access beyond end of device
>[   37.605259] loop0: rw=0, want=285368, limit=285320
>[   37.605263] attempt to access beyond end of device
>[   37.605266] loop0: rw=0, want=285370, limit=285320
>[   37.605270] attempt to access beyond end of device
>[   37.605274] loop0: rw=0, want=285372, limit=285320
>[   37.605278] attempt to access beyond end of device
>[   37.605282] loop0: rw=0, want=285374, limit=285320
>[   37.605286] attempt to access beyond end of device
>[   37.605289] loop0: rw=0, want=285376, limit=285320
>[   37.605293] attempt to access beyond end of device
>[   37.605297] loop0: rw=0, want=285378, limit=285320
>[   37.605301] attempt to access beyond end of device
>[   37.605305] loop0: rw=0, want=285380, limit=285320
>[   37.605308] attempt to access beyond end of device
>[   37.605312] loop0: rw=0, want=285382, limit=285320
>[   37.605316] attempt to access beyond end of device
>[   37.605320] loop0: rw=0, want=285384, limit=285320
>[   37.605324] attempt to access beyond end of device
>[   37.605327] loop0: rw=0, want=285386, limit=285320
>[   37.605331] attempt to access beyond end of device
>[   37.605335] loop0: rw=0, want=285388, limit=285320
>[   37.605339] attempt to access beyond end of device
>[   37.605343] loop0: rw=0, want=285390, limit=285320
>[   37.605347] attempt to access beyond end of device
>[   37.605350] loop0: rw=0, want=285392, limit=285320
>[   37.605354] attempt to access beyond end of device
>[   37.605358] loop0: rw=0, want=285394, limit=285320
>[   37.605362] attempt to access beyond end of device
>[   37.605366] loop0: rw=0, want=285396, limit=285320
>[   37.605370] attempt to access beyond end of device
>[   37.605373] loop0: rw=0, want=285398, limit=285320
>[   37.605377] attempt to access beyond end of device
>[   37.605381] loop0: rw=0, want=285400, limit=285320
>[   37.605385] attempt to access beyond end of device
>[   37.605388] loop0: rw=0, want=285402, limit=285320
>[   37.605393] attempt to access beyond end of device
>[   37.605396] loop0: rw=0, want=285404, limit=285320
>[   37.605400] attempt to access beyond end of device
>[   37.605404] loop0: rw=0, want=285406, limit=285320
>[   37.605408] attempt to access beyond end of device
>[   37.605412] loop0: rw=0, want=285408, limit=285320
>[   37.605416] attempt to access beyond end of device
>[   37.605419] loop0: rw=0, want=285410, limit=285320
>[   37.605423] attempt to access beyond end of device
>[   37.605427] loop0: rw=0, want=285412, limit=285320
>[   37.605431] attempt to access beyond end of device
>[   37.605435] loop0: rw=0, want=285414, limit=285320
>[   37.605439] attempt to access beyond end of device
>[   37.605442] loop0: rw=0, want=285416, limit=285320
>[   37.605446] attempt to access beyond end of device
>[   37.605450] loop0: rw=0, want=285418, limit=285320
>[   37.605454] attempt to access beyond end of device
>[   37.605458] loop0: rw=0, want=285420, limit=285320
>[   37.605462] attempt to access beyond end of device
>[   37.605465] loop0: rw=0, want=285422, limit=285320
>[   37.605469] attempt to access beyond end of device
>[   37.605473] loop0: rw=0, want=285424, limit=285320
>[   37.605477] attempt to access beyond end of device
>[   37.605481] loop0: rw=0, want=285426, limit=285320
>[   37.605485] attempt to access beyond end of device
>[   37.605488] loop0: rw=0, want=285428, limit=285320
>[   37.605492] attempt to access beyond end of device
>[   37.605496] loop0: rw=0, want=285430, limit=285320
>[   37.605500] attempt to access beyond end of device
>[   37.605504] loop0: rw=0, want=285432, limit=285320
>[   37.605508] attempt to access beyond end of device
>[   37.605511] loop0: rw=0, want=285434, limit=285320
>[   37.605515] attempt to access beyond end of device
>[   37.605519] loop0: rw=0, want=285436, limit=285320
>[   37.605523] attempt to access beyond end of device
>[   37.605527] loop0: rw=0, want=285438, limit=285320
>[   37.605531] attempt to access beyond end of device
>[   37.605534] loop0: rw=0, want=285440, limit=285320
>[   37.605552] attempt to access beyond end of device
>[   37.605556] loop0: rw=0, want=285322, limit=285320
>[   37.605560] attempt to access beyond end of device
>[   37.605564] loop0: rw=0, want=285324, limit=285320
>[   37.605568] attempt to access beyond end of device
>[   37.605572] loop0: rw=0, want=285326, limit=285320
>[   37.605576] attempt to access beyond end of device
>[   37.605579] loop0: rw=0, want=285328, limit=285320
>[   37.605583] attempt to access beyond end of device
>[   37.605587] loop0: rw=0, want=285330, limit=285320
>[   37.605591] attempt to access beyond end of device
>[   37.605595] loop0: rw=0, want=285332, limit=285320
>[   37.605599] attempt to access beyond end of device
>[   37.605602] loop0: rw=0, want=285334, limit=285320
>[   37.605606] attempt to access beyond end of device
>[   37.605610] loop0: rw=0, want=285336, limit=285320
>[   37.605614] attempt to access beyond end of device
>[   37.605617] loop0: rw=0, want=285338, limit=285320
>[   37.605621] attempt to access beyond end of device
>[   37.605625] loop0: rw=0, want=285340, limit=285320
>[   37.605629] attempt to access beyond end of device
>[   37.605633] loop0: rw=0, want=285342, limit=285320
>[   37.605637] attempt to access beyond end of device
>[   37.605640] loop0: rw=0, want=285344, limit=285320
>[   37.605644] attempt to access beyond end of device
>[   37.605648] loop0: rw=0, want=285346, limit=285320
>[   37.605652] attempt to access beyond end of device
>[   37.605656] loop0: rw=0, want=285348, limit=285320
>[   37.605660] attempt to access beyond end of device
>[   37.605663] loop0: rw=0, want=285350, limit=285320
>[   37.605667] attempt to access beyond end of device
>[   37.605671] loop0: rw=0, want=285352, limit=285320
>[   37.605675] attempt to access beyond end of device
>[   37.605678] loop0: rw=0, want=285354, limit=285320
>[   37.605682] attempt to access beyond end of device
>[   37.605686] loop0: rw=0, want=285356, limit=285320
>[   37.605690] attempt to access beyond end of device
>[   37.605694] loop0: rw=0, want=285358, limit=285320
>[   37.605697] attempt to access beyond end of device
>[   37.605701] loop0: rw=0, want=285360, limit=285320
>[   37.605705] attempt to access beyond end of device
>[   37.605709] loop0: rw=0, want=285362, limit=285320
>[   37.605713] attempt to access beyond end of device
>[   37.605716] loop0: rw=0, want=285364, limit=285320
>[   37.605720] attempt to access beyond end of device
>[   37.605724] loop0: rw=0, want=285366, limit=285320
>[   37.605728] attempt to access beyond end of device
>[   37.605731] loop0: rw=0, want=285368, limit=285320
>[   37.605735] attempt to access beyond end of device
>[   37.605739] loop0: rw=0, want=285370, limit=285320
>[   37.605743] attempt to access beyond end of device
>[   37.605746] loop0: rw=0, want=285372, limit=285320
>[   37.605750] attempt to access beyond end of device
>[   37.605754] loop0: rw=0, want=285374, limit=285320
>[   37.605758] attempt to access beyond end of device
>[   37.605762] loop0: rw=0, want=285376, limit=285320
>[   37.605766] attempt to access beyond end of device
>[   37.605769] loop0: rw=0, want=285378, limit=285320
>[   37.605773] attempt to access beyond end of device
>[   37.605777] loop0: rw=0, want=285380, limit=285320
>[   37.605781] attempt to access beyond end of device
>[   37.605784] loop0: rw=0, want=285382, limit=285320
>[   37.605789] attempt to access beyond end of device
>[   37.605792] loop0: rw=0, want=285384, limit=285320
>[   37.605796] attempt to access beyond end of device
>[   37.605800] loop0: rw=0, want=285386, limit=285320
>[   37.605804] attempt to access beyond end of device
>[   37.605807] loop0: rw=0, want=285388, limit=285320
>[   37.605811] attempt to access beyond end of device
>[   37.605815] loop0: rw=0, want=285390, limit=285320
>[   37.605819] attempt to access beyond end of device
>[   37.605822] loop0: rw=0, want=285392, limit=285320
>[   37.605826] attempt to access beyond end of device
>[   37.605830] loop0: rw=0, want=285394, limit=285320
>[   37.605834] attempt to access beyond end of device
>[   37.605838] loop0: rw=0, want=285396, limit=285320
>[   37.605842] attempt to access beyond end of device
>[   37.605845] loop0: rw=0, want=285398, limit=285320
>[   37.605849] attempt to access beyond end of device
>[   37.605853] loop0: rw=0, want=285400, limit=285320
>[   37.605857] attempt to access beyond end of device
>[   37.605861] loop0: rw=0, want=285402, limit=285320
>[   37.605865] attempt to access beyond end of device
>[   37.605868] loop0: rw=0, want=285404, limit=285320
>[   37.605872] attempt to access beyond end of device
>[   37.605876] loop0: rw=0, want=285406, limit=285320
>[   37.605880] attempt to access beyond end of device
>[   37.605884] loop0: rw=0, want=285408, limit=285320
>[   37.605888] attempt to access beyond end of device
>[   37.605891] loop0: rw=0, want=285410, limit=285320
>[   37.605896] attempt to access beyond end of device
>[   37.605899] loop0: rw=0, want=285412, limit=285320
>[   37.605903] attempt to access beyond end of device
>[   37.605907] loop0: rw=0, want=285414, limit=285320
>[   37.605911] attempt to access beyond end of device
>[   37.605914] loop0: rw=0, want=285416, limit=285320
>[   37.605918] attempt to access beyond end of device
>[   37.605922] loop0: rw=0, want=285418, limit=285320
>[   37.605926] attempt to access beyond end of device
>[   37.605930] loop0: rw=0, want=285420, limit=285320
>[   37.605934] attempt to access beyond end of device
>[   37.605937] loop0: rw=0, want=285422, limit=285320
>[   37.605941] attempt to access beyond end of device
>[   37.605945] loop0: rw=0, want=285424, limit=285320
>[   37.605949] attempt to access beyond end of device
>[   37.605953] loop0: rw=0, want=285426, limit=285320
>[   37.605957] attempt to access beyond end of device
>[   37.605960] loop0: rw=0, want=285428, limit=285320
>[   37.605965] attempt to access beyond end of device
>[   37.605968] loop0: rw=0, want=285430, limit=285320
>[   37.605972] attempt to access beyond end of device
>[   37.605976] loop0: rw=0, want=285432, limit=285320
>[   37.605980] attempt to access beyond end of device
>[   37.605983] loop0: rw=0, want=285434, limit=285320
>[   37.605987] attempt to access beyond end of device
>[   37.605991] loop0: rw=0, want=285436, limit=285320
>[   37.605995] attempt to access beyond end of device
>[   37.605999] loop0: rw=0, want=285438, limit=285320
>[   37.606003] attempt to access beyond end of device
>[   37.606006] loop0: rw=0, want=285440, limit=285320
>[   37.606023] attempt to access beyond end of device
>[   37.606027] loop0: rw=0, want=285322, limit=285320
>[   37.606032] attempt to access beyond end of device
>[   37.606035] loop0: rw=0, want=285324, limit=285320
>[   37.606039] attempt to access beyond end of device
>[   37.606043] loop0: rw=0, want=285326, limit=285320
>[   37.606047] attempt to access beyond end of device
>[   37.606050] loop0: rw=0, want=285328, limit=285320
>[   37.606054] attempt to access beyond end of device
>[   37.606058] loop0: rw=0, want=285330, limit=285320
>[   37.606062] attempt to access beyond end of device
>[   37.606066] loop0: rw=0, want=285332, limit=285320
>[   37.606070] attempt to access beyond end of device
>[   37.606073] loop0: rw=0, want=285334, limit=285320
>[   37.606077] attempt to access beyond end of device
>[   37.606081] loop0: rw=0, want=285336, limit=285320
>[   37.606085] attempt to access beyond end of device
>[   37.606088] loop0: rw=0, want=285338, limit=285320
>[   37.606092] attempt to access beyond end of device
>[   37.606096] loop0: rw=0, want=285340, limit=285320
>[   37.606100] attempt to access beyond end of device
>[   37.606104] loop0: rw=0, want=285342, limit=285320
>[   37.606108] attempt to access beyond end of device
>[   37.606111] loop0: rw=0, want=285344, limit=285320
>[   37.606115] attempt to access beyond end of device
>[   37.606119] loop0: rw=0, want=285346, limit=285320
>[   37.606123] attempt to access beyond end of device
>[   37.606126] loop0: rw=0, want=285348, limit=285320
>[   37.606130] attempt to access beyond end of device
>[   37.606134] loop0: rw=0, want=285350, limit=285320
>[   37.606138] attempt to access beyond end of device
>[   37.606142] loop0: rw=0, want=285352, limit=285320
>[   37.606146] attempt to access beyond end of device
>[   37.606149] loop0: rw=0, want=285354, limit=285320
>[   37.606153] attempt to access beyond end of device
>[   37.606157] loop0: rw=0, want=285356, limit=285320
>[   37.606161] attempt to access beyond end of device
>[   37.606164] loop0: rw=0, want=285358, limit=285320
>[   37.606168] attempt to access beyond end of device
>[   37.606172] loop0: rw=0, want=285360, limit=285320
>[   37.606176] attempt to access beyond end of device
>[   37.606179] loop0: rw=0, want=285362, limit=285320
>[   37.606183] attempt to access beyond end of device
>[   37.606187] loop0: rw=0, want=285364, limit=285320
>[   37.606191] attempt to access beyond end of device
>[   37.606195] loop0: rw=0, want=285366, limit=285320
>[   37.606199] attempt to access beyond end of device
>[   37.606202] loop0: rw=0, want=285368, limit=285320
>[   37.606206] attempt to access beyond end of device
>[   37.606210] loop0: rw=0, want=285370, limit=285320
>[   37.606214] attempt to access beyond end of device
>[   37.606217] loop0: rw=0, want=285372, limit=285320
>[   37.606221] attempt to access beyond end of device
>[   37.606225] loop0: rw=0, want=285374, limit=285320
>[   37.606229] attempt to access beyond end of device
>[   37.606232] loop0: rw=0, want=285376, limit=285320
>[   37.606236] attempt to access beyond end of device
>[   37.606240] loop0: rw=0, want=285378, limit=285320
>[   37.606244] attempt to access beyond end of device
>[   37.606247] loop0: rw=0, want=285380, limit=285320
>[   37.606251] attempt to access beyond end of device
>[   37.606255] loop0: rw=0, want=285382, limit=285320
>[   37.606259] attempt to access beyond end of device
>[   37.606263] loop0: rw=0, want=285384, limit=285320
>[   37.606267] attempt to access beyond end of device
>[   37.606270] loop0: rw=0, want=285386, limit=285320
>[   37.606274] attempt to access beyond end of device
>[   37.606278] loop0: rw=0, want=285388, limit=285320
>[   37.606282] attempt to access beyond end of device
>[   37.606285] loop0: rw=0, want=285390, limit=285320
>[   37.606289] attempt to access beyond end of device
>[   37.606293] loop0: rw=0, want=285392, limit=285320
>[   37.606297] attempt to access beyond end of device
>[   37.606300] loop0: rw=0, want=285394, limit=285320
>[   37.606304] attempt to access beyond end of device
>[   37.606308] loop0: rw=0, want=285396, limit=285320
>[   37.606312] attempt to access beyond end of device
>[   37.606316] loop0: rw=0, want=285398, limit=285320
>[   37.606320] attempt to access beyond end of device
>[   37.606323] loop0: rw=0, want=285400, limit=285320
>[   37.606327] attempt to access beyond end of device
>[   37.606331] loop0: rw=0, want=285402, limit=285320
>[   37.606335] attempt to access beyond end of device
>[   37.606338] loop0: rw=0, want=285404, limit=285320
>[   37.606342] attempt to access beyond end of device
>[   37.606346] loop0: rw=0, want=285406, limit=285320
>[   37.606350] attempt to access beyond end of device
>[   37.606353] loop0: rw=0, want=285408, limit=285320
>[   37.606357] attempt to access beyond end of device
>[   37.606361] loop0: rw=0, want=285410, limit=285320
>[   37.606365] attempt to access beyond end of device
>[   37.606369] loop0: rw=0, want=285412, limit=285320
>[   37.606373] attempt to access beyond end of device
>[   37.606376] loop0: rw=0, want=285414, limit=285320
>[   37.606380] attempt to access beyond end of device
>[   37.606384] loop0: rw=0, want=285416, limit=285320
>[   37.606388] attempt to access beyond end of device
>[   37.606391] loop0: rw=0, want=285418, limit=285320
>[   37.606396] attempt to access beyond end of device
>[   37.606399] loop0: rw=0, want=285420, limit=285320
>[   37.606403] attempt to access beyond end of device
>[   37.606407] loop0: rw=0, want=285422, limit=285320
>[   37.606411] attempt to access beyond end of device
>[   37.606414] loop0: rw=0, want=285424, limit=285320
>[   37.606418] attempt to access beyond end of device
>[   37.606422] loop0: rw=0, want=285426, limit=285320
>[   37.606426] attempt to access beyond end of device
>[   37.606430] loop0: rw=0, want=285428, limit=285320
>[   37.606434] attempt to access beyond end of device
>[   37.606437] loop0: rw=0, want=285430, limit=285320
>[   37.606441] attempt to access beyond end of device
>[   37.606445] loop0: rw=0, want=285432, limit=285320
>[   37.606449] attempt to access beyond end of device
>[   37.606453] loop0: rw=0, want=285434, limit=285320
>[   37.606457] attempt to access beyond end of device
>[   37.606460] loop0: rw=0, want=285436, limit=285320
>[   37.606464] attempt to access beyond end of device
>[   37.606468] loop0: rw=0, want=285438, limit=285320
>[   37.606472] attempt to access beyond end of device
>[   37.606476] loop0: rw=0, want=285440, limit=285320
>[   37.606490] attempt to access beyond end of device
>[   37.606494] loop0: rw=0, want=285322, limit=285320
>[   37.606498] attempt to access beyond end of device
>[   37.606501] loop0: rw=0, want=285324, limit=285320
>[   37.606505] attempt to access beyond end of device
>[   37.606509] loop0: rw=0, want=285326, limit=285320
>[   37.606513] attempt to access beyond end of device
>[   37.606517] loop0: rw=0, want=285328, limit=285320
>[   37.606521] attempt to access beyond end of device
>[   37.606524] loop0: rw=0, want=285330, limit=285320
>[   37.606528] attempt to access beyond end of device
>[   37.606532] loop0: rw=0, want=285332, limit=285320
>[   37.606536] attempt to access beyond end of device
>[   37.606540] loop0: rw=0, want=285334, limit=285320
>[   37.606544] attempt to access beyond end of device
>[   37.606547] loop0: rw=0, want=285336, limit=285320
>[   37.606551] attempt to access beyond end of device
>[   37.606555] loop0: rw=0, want=285338, limit=285320
>[   37.606559] attempt to access beyond end of device
>[   37.606563] loop0: rw=0, want=285340, limit=285320
>[   37.606567] attempt to access beyond end of device
>[   37.606570] loop0: rw=0, want=285342, limit=285320
>[   37.606575] attempt to access beyond end of device
>[   37.606578] loop0: rw=0, want=285344, limit=285320
>[   37.606582] attempt to access beyond end of device
>[   37.606586] loop0: rw=0, want=285346, limit=285320
>[   37.606590] attempt to access beyond end of device
>[   37.606594] loop0: rw=0, want=285348, limit=285320
>[   37.606598] attempt to access beyond end of device
>[   37.606601] loop0: rw=0, want=285350, limit=285320
>[   37.606605] attempt to access beyond end of device
>[   37.606609] loop0: rw=0, want=285352, limit=285320
>[   37.606613] attempt to access beyond end of device
>[   37.606616] loop0: rw=0, want=285354, limit=285320
>[   37.606620] attempt to access beyond end of device
>[   37.606624] loop0: rw=0, want=285356, limit=285320
>[   37.606628] attempt to access beyond end of device
>[   37.606632] loop0: rw=0, want=285358, limit=285320
>[   37.606636] attempt to access beyond end of device
>[   37.606639] loop0: rw=0, want=285360, limit=285320
>[   37.606643] attempt to access beyond end of device
>[   37.606647] loop0: rw=0, want=285362, limit=285320
>[   37.606651] attempt to access beyond end of device
>[   37.606655] loop0: rw=0, want=285364, limit=285320
>[   37.606659] attempt to access beyond end of device
>[   37.606662] loop0: rw=0, want=285366, limit=285320
>[   37.606666] attempt to access beyond end of device
>[   37.606670] loop0: rw=0, want=285368, limit=285320
>[   37.606674] attempt to access beyond end of device
>[   37.606678] loop0: rw=0, want=285370, limit=285320
>[   37.606682] attempt to access beyond end of device
>[   37.606685] loop0: rw=0, want=285372, limit=285320
>[   37.606689] attempt to access beyond end of device
>[   37.606693] loop0: rw=0, want=285374, limit=285320
>[   37.606697] attempt to access beyond end of device
>[   37.606701] loop0: rw=0, want=285376, limit=285320
>[   37.606705] attempt to access beyond end of device
>[   37.606708] loop0: rw=0, want=285378, limit=285320
>[   37.606712] attempt to access beyond end of device
>[   37.606716] loop0: rw=0, want=285380, limit=285320
>[   37.606720] attempt to access beyond end of device
>[   37.606723] loop0: rw=0, want=285382, limit=285320
>[   37.606728] attempt to access beyond end of device
>[   37.606731] loop0: rw=0, want=285384, limit=285320
>[   37.606735] attempt to access beyond end of device
>[   37.606739] loop0: rw=0, want=285386, limit=285320
>[   37.606743] attempt to access beyond end of device
>[   37.606747] loop0: rw=0, want=285388, limit=285320
>[   37.606751] attempt to access beyond end of device
>[   37.606754] loop0: rw=0, want=285390, limit=285320
>[   37.606758] attempt to access beyond end of device
>[   37.606762] loop0: rw=0, want=285392, limit=285320
>[   37.606766] attempt to access beyond end of device
>[   37.606769] loop0: rw=0, want=285394, limit=285320
>[   37.606773] attempt to access beyond end of device
>[   37.606777] loop0: rw=0, want=285396, limit=285320
>[   37.606781] attempt to access beyond end of device
>[   37.606784] loop0: rw=0, want=285398, limit=285320
>[   37.606788] attempt to access beyond end of device
>[   37.606792] loop0: rw=0, want=285400, limit=285320
>[   37.606796] attempt to access beyond end of device
>[   37.606800] loop0: rw=0, want=285402, limit=285320
>[   37.606804] attempt to access beyond end of device
>[   37.606807] loop0: rw=0, want=285404, limit=285320
>[   37.606811] attempt to access beyond end of device
>[   37.606815] loop0: rw=0, want=285406, limit=285320
>[   37.606819] attempt to access beyond end of device
>[   37.606822] loop0: rw=0, want=285408, limit=285320
>[   37.606826] attempt to access beyond end of device
>[   37.606830] loop0: rw=0, want=285410, limit=285320
>[   37.606834] attempt to access beyond end of device
>[   37.606838] loop0: rw=0, want=285412, limit=285320
>[   37.606842] attempt to access beyond end of device
>[   37.606845] loop0: rw=0, want=285414, limit=285320
>[   37.606849] attempt to access beyond end of device
>[   37.606853] loop0: rw=0, want=285416, limit=285320
>[   37.606857] attempt to access beyond end of device
>[   37.606861] loop0: rw=0, want=285418, limit=285320
>[   37.606865] attempt to access beyond end of device
>[   37.606869] loop0: rw=0, want=285420, limit=285320
>[   37.607031] attempt to access beyond end of device
>[   37.607035] loop0: rw=0, want=285422, limit=285320
>[   37.607040] attempt to access beyond end of device
>[   37.607043] loop0: rw=0, want=285424, limit=285320
>[   37.607047] attempt to access beyond end of device
>[   37.607051] loop0: rw=0, want=285426, limit=285320
>[   37.607055] attempt to access beyond end of device
>[   37.607058] loop0: rw=0, want=285428, limit=285320
>[   37.607063] attempt to access beyond end of device
>[   37.607066] loop0: rw=0, want=285430, limit=285320
>[   37.607070] attempt to access beyond end of device
>[   37.607074] loop0: rw=0, want=285432, limit=285320
>[   37.607078] attempt to access beyond end of device
>[   37.607081] loop0: rw=0, want=285434, limit=285320
>[   37.607085] attempt to access beyond end of device
>[   37.607089] loop0: rw=0, want=285436, limit=285320
>[   37.607093] attempt to access beyond end of device
>[   37.607097] loop0: rw=0, want=285438, limit=285320
>[   37.607100] attempt to access beyond end of device
>[   37.607104] loop0: rw=0, want=285440, limit=285320
>[   37.607124] attempt to access beyond end of device
>[   37.607127] loop0: rw=0, want=285322, limit=285320
>[   37.607131] attempt to access beyond end of device
>[   37.607135] loop0: rw=0, want=285324, limit=285320
>[   37.607139] attempt to access beyond end of device
>[   37.607143] loop0: rw=0, want=285326, limit=285320
>[   37.607147] attempt to access beyond end of device
>[   37.607150] loop0: rw=0, want=285328, limit=285320
>[   37.607154] attempt to access beyond end of device
>[   37.607158] loop0: rw=0, want=285330, limit=285320
>[   37.607162] attempt to access beyond end of device
>[   37.607166] loop0: rw=0, want=285332, limit=285320
>[   37.607170] attempt to access beyond end of device
>[   37.607173] loop0: rw=0, want=285334, limit=285320
>[   37.607177] attempt to access beyond end of device
>[   37.607181] loop0: rw=0, want=285336, limit=285320
>[   37.607185] attempt to access beyond end of device
>[   37.607188] loop0: rw=0, want=285338, limit=285320
>[   37.607192] attempt to access beyond end of device
>[   37.607196] loop0: rw=0, want=285340, limit=285320
>[   37.607200] attempt to access beyond end of device
>[   37.607203] loop0: rw=0, want=285342, limit=285320
>[   37.607207] attempt to access beyond end of device
>[   37.607211] loop0: rw=0, want=285344, limit=285320
>[   37.607215] attempt to access beyond end of device
>[   37.607219] loop0: rw=0, want=285346, limit=285320
>[   37.607223] attempt to access beyond end of device
>[   37.607226] loop0: rw=0, want=285348, limit=285320
>[   37.607230] attempt to access beyond end of device
>[   37.607234] loop0: rw=0, want=285350, limit=285320
>[   37.607238] attempt to access beyond end of device
>[   37.607241] loop0: rw=0, want=285352, limit=285320
>[   37.607245] attempt to access beyond end of device
>[   37.607249] loop0: rw=0, want=285354, limit=285320
>[   37.607253] attempt to access beyond end of device
>[   37.607256] loop0: rw=0, want=285356, limit=285320
>[   37.607261] attempt to access beyond end of device
>[   37.607264] loop0: rw=0, want=285358, limit=285320
>[   37.607268] attempt to access beyond end of device
>[   37.607272] loop0: rw=0, want=285360, limit=285320
>[   37.607276] attempt to access beyond end of device
>[   37.607279] loop0: rw=0, want=285362, limit=285320
>[   37.607283] attempt to access beyond end of device
>[   37.607287] loop0: rw=0, want=285364, limit=285320
>[   37.607291] attempt to access beyond end of device
>[   37.607294] loop0: rw=0, want=285366, limit=285320
>[   37.607298] attempt to access beyond end of device
>[   37.607302] loop0: rw=0, want=285368, limit=285320
>[   37.607306] attempt to access beyond end of device
>[   37.607310] loop0: rw=0, want=285370, limit=285320
>[   37.607314] attempt to access beyond end of device
>[   37.607318] loop0: rw=0, want=285372, limit=285320
>[   37.607321] attempt to access beyond end of device
>[   37.607325] loop0: rw=0, want=285374, limit=285320
>[   37.607329] attempt to access beyond end of device
>[   37.607333] loop0: rw=0, want=285376, limit=285320
>[   37.607337] attempt to access beyond end of device
>[   37.607340] loop0: rw=0, want=285378, limit=285320
>[   37.607344] attempt to access beyond end of device
>[   37.607348] loop0: rw=0, want=285380, limit=285320
>[   37.607352] attempt to access beyond end of device
>[   37.607355] loop0: rw=0, want=285382, limit=285320
>[   37.607360] attempt to access beyond end of device
>[   37.607363] loop0: rw=0, want=285384, limit=285320
>[   37.607367] attempt to access beyond end of device
>[   37.607371] loop0: rw=0, want=285386, limit=285320
>[   37.607375] attempt to access beyond end of device
>[   37.607378] loop0: rw=0, want=285388, limit=285320
>[   37.607382] attempt to access beyond end of device
>[   37.607386] loop0: rw=0, want=285390, limit=285320
>[   37.607390] attempt to access beyond end of device
>[   37.607394] loop0: rw=0, want=285392, limit=285320
>[   37.607398] attempt to access beyond end of device
>[   37.607401] loop0: rw=0, want=285394, limit=285320
>[   37.607405] attempt to access beyond end of device
>[   37.607409] loop0: rw=0, want=285396, limit=285320
>[   37.607413] attempt to access beyond end of device
>[   37.607417] loop0: rw=0, want=285398, limit=285320
>[   37.607421] attempt to access beyond end of device
>[   37.607424] loop0: rw=0, want=285400, limit=285320
>[   37.607428] attempt to access beyond end of device
>[   37.607432] loop0: rw=0, want=285402, limit=285320
>[   37.607436] attempt to access beyond end of device
>[   37.607440] loop0: rw=0, want=285404, limit=285320
>[   37.607444] attempt to access beyond end of device
>[   37.607447] loop0: rw=0, want=285406, limit=285320
>[   37.607451] attempt to access beyond end of device
>[   37.607455] loop0: rw=0, want=285408, limit=285320
>[   37.607459] attempt to access beyond end of device
>[   37.607463] loop0: rw=0, want=285410, limit=285320
>[   37.607467] attempt to access beyond end of device
>[   37.607470] loop0: rw=0, want=285412, limit=285320
>[   37.607474] attempt to access beyond end of device
>[   37.607478] loop0: rw=0, want=285414, limit=285320
>[   37.607482] attempt to access beyond end of device
>[   37.607486] loop0: rw=0, want=285416, limit=285320
>[   37.607490] attempt to access beyond end of device
>[   37.607493] loop0: rw=0, want=285418, limit=285320
>[   37.607497] attempt to access beyond end of device
>[   37.607501] loop0: rw=0, want=285420, limit=285320
>[   37.607505] attempt to access beyond end of device
>[   37.607509] loop0: rw=0, want=285422, limit=285320
>[   37.607513] attempt to access beyond end of device
>[   37.607516] loop0: rw=0, want=285424, limit=285320
>[   37.607520] attempt to access beyond end of device
>[   37.607524] loop0: rw=0, want=285426, limit=285320
>[   37.607528] attempt to access beyond end of device
>[   37.607532] loop0: rw=0, want=285428, limit=285320
>[   37.607536] attempt to access beyond end of device
>[   37.607539] loop0: rw=0, want=285430, limit=285320
>[   37.607543] attempt to access beyond end of device
>[   37.607547] loop0: rw=0, want=285432, limit=285320
>[   37.607551] attempt to access beyond end of device
>[   37.607554] loop0: rw=0, want=285434, limit=285320
>[   37.607559] attempt to access beyond end of device
>[   37.607562] loop0: rw=0, want=285436, limit=285320
>[   37.607566] attempt to access beyond end of device
>[   37.607570] loop0: rw=0, want=285438, limit=285320
>[   37.607574] attempt to access beyond end of device
>[   37.607577] loop0: rw=0, want=285440, limit=285320
>[   37.607592] attempt to access beyond end of device
>[   37.607596] loop0: rw=0, want=285322, limit=285320
>[   37.607600] attempt to access beyond end of device
>[   37.607603] loop0: rw=0, want=285324, limit=285320
>[   37.607607] attempt to access beyond end of device
>[   37.607611] loop0: rw=0, want=285326, limit=285320
>[   37.607615] attempt to access beyond end of device
>[   37.607619] loop0: rw=0, want=285328, limit=285320
>[   37.607623] attempt to access beyond end of device
>[   37.607626] loop0: rw=0, want=285330, limit=285320
>[   37.607630] attempt to access beyond end of device
>[   37.607634] loop0: rw=0, want=285332, limit=285320
>[   37.607638] attempt to access beyond end of device
>[   37.607642] loop0: rw=0, want=285334, limit=285320
>[   37.607646] attempt to access beyond end of device
>[   37.607649] loop0: rw=0, want=285336, limit=285320
>[   37.607653] attempt to access beyond end of device
>[   37.607657] loop0: rw=0, want=285338, limit=285320
>[   37.607661] attempt to access beyond end of device
>[   37.607665] loop0: rw=0, want=285340, limit=285320
>[   37.607668] attempt to access beyond end of device
>[   37.607672] loop0: rw=0, want=285342, limit=285320
>[   37.607676] attempt to access beyond end of device
>[   37.607680] loop0: rw=0, want=285344, limit=285320
>[   37.607684] attempt to access beyond end of device
>[   37.607687] loop0: rw=0, want=285346, limit=285320
>[   37.607691] attempt to access beyond end of device
>[   37.607695] loop0: rw=0, want=285348, limit=285320
>[   37.607699] attempt to access beyond end of device
>[   37.607703] loop0: rw=0, want=285350, limit=285320
>[   37.607707] attempt to access beyond end of device
>[   37.607710] loop0: rw=0, want=285352, limit=285320
>[   37.607714] attempt to access beyond end of device
>[   37.607718] loop0: rw=0, want=285354, limit=285320
>[   37.607722] attempt to access beyond end of device
>[   37.607725] loop0: rw=0, want=285356, limit=285320
>[   37.607729] attempt to access beyond end of device
>[   37.607733] loop0: rw=0, want=285358, limit=285320
>[   37.607737] attempt to access beyond end of device
>[   37.607740] loop0: rw=0, want=285360, limit=285320
>[   37.607744] attempt to access beyond end of device
>[   37.607748] loop0: rw=0, want=285362, limit=285320
>[   37.607752] attempt to access beyond end of device
>[   37.607755] loop0: rw=0, want=285364, limit=285320
>[   37.607759] attempt to access beyond end of device
>[   37.607763] loop0: rw=0, want=285366, limit=285320
>[   37.607767] attempt to access beyond end of device
>[   37.607771] loop0: rw=0, want=285368, limit=285320
>[   37.607775] attempt to access beyond end of device
>[   37.607778] loop0: rw=0, want=285370, limit=285320
>[   37.607782] attempt to access beyond end of device
>[   37.607786] loop0: rw=0, want=285372, limit=285320
>[   37.607790] attempt to access beyond end of device
>[   37.607793] loop0: rw=0, want=285374, limit=285320
>[   37.607797] attempt to access beyond end of device
>[   37.607801] loop0: rw=0, want=285376, limit=285320
>[   37.607805] attempt to access beyond end of device
>[   37.607809] loop0: rw=0, want=285378, limit=285320
>[   37.607813] attempt to access beyond end of device
>[   37.607816] loop0: rw=0, want=285380, limit=285320
>[   37.607820] attempt to access beyond end of device
>[   37.607824] loop0: rw=0, want=285382, limit=285320
>[   37.607828] attempt to access beyond end of device
>[   37.607832] loop0: rw=0, want=285384, limit=285320
>[   37.607836] attempt to access beyond end of device
>[   37.607839] loop0: rw=0, want=285386, limit=285320
>[   37.607843] attempt to access beyond end of device
>[   37.607847] loop0: rw=0, want=285388, limit=285320
>[   37.607851] attempt to access beyond end of device
>[   37.607854] loop0: rw=0, want=285390, limit=285320
>[   37.607859] attempt to access beyond end of device
>[   37.607862] loop0: rw=0, want=285392, limit=285320
>[   37.607866] attempt to access beyond end of device
>[   37.607870] loop0: rw=0, want=285394, limit=285320
>[   37.607874] attempt to access beyond end of device
>[   37.607877] loop0: rw=0, want=285396, limit=285320
>[   37.607881] attempt to access beyond end of device
>[   37.607885] loop0: rw=0, want=285398, limit=285320
>[   37.607889] attempt to access beyond end of device
>[   37.607893] loop0: rw=0, want=285400, limit=285320
>[   37.607897] attempt to access beyond end of device
>[   37.607900] loop0: rw=0, want=285402, limit=285320
>[   37.607904] attempt to access beyond end of device
>[   37.607908] loop0: rw=0, want=285404, limit=285320
>[   37.607912] attempt to access beyond end of device
>[   37.607916] loop0: rw=0, want=285406, limit=285320
>[   37.607920] attempt to access beyond end of device
>[   37.607923] loop0: rw=0, want=285408, limit=285320
>[   37.607927] attempt to access beyond end of device
>[   37.607931] loop0: rw=0, want=285410, limit=285320
>[   37.607935] attempt to access beyond end of device
>[   37.607939] loop0: rw=0, want=285412, limit=285320
>[   37.607943] attempt to access beyond end of device
>[   37.607946] loop0: rw=0, want=285414, limit=285320
>[   37.607950] attempt to access beyond end of device
>[   37.607954] loop0: rw=0, want=285416, limit=285320
>[   37.607958] attempt to access beyond end of device
>[   37.607962] loop0: rw=0, want=285418, limit=285320
>[   37.607966] attempt to access beyond end of device
>[   37.607969] loop0: rw=0, want=285420, limit=285320
>[   37.607973] attempt to access beyond end of device
>[   37.607977] loop0: rw=0, want=285422, limit=285320
>[   37.607981] attempt to access beyond end of device
>[   37.607984] loop0: rw=0, want=285424, limit=285320
>[   37.607988] attempt to access beyond end of device
>[   37.607992] loop0: rw=0, want=285426, limit=285320
>[   37.607996] attempt to access beyond end of device
>[   37.608000] loop0: rw=0, want=285428, limit=285320
>[   37.608004] attempt to access beyond end of device
>[   37.608007] loop0: rw=0, want=285430, limit=285320
>[   37.608011] attempt to access beyond end of device
>[   37.608015] loop0: rw=0, want=285432, limit=285320
>[   37.608019] attempt to access beyond end of device
>[   37.608023] loop0: rw=0, want=285434, limit=285320
>[   37.608027] attempt to access beyond end of device
>[   37.608030] loop0: rw=0, want=285436, limit=285320
>[   37.608034] attempt to access beyond end of device
>[   37.608038] loop0: rw=0, want=285438, limit=285320
>[   37.608042] attempt to access beyond end of device
>[   37.608046] loop0: rw=0, want=285440, limit=285320
>[   37.609421] attempt to access beyond end of device
>[   37.609429] loop0: rw=0, want=285322, limit=285320
>[   37.609434] attempt to access beyond end of device
>[   37.609438] loop0: rw=0, want=285324, limit=285320
>[   37.609442] attempt to access beyond end of device
>[   37.609445] loop0: rw=0, want=285326, limit=285320
>[   37.609449] attempt to access beyond end of device
>[   37.609453] loop0: rw=0, want=285328, limit=285320
>[   37.609457] attempt to access beyond end of device
>[   37.609461] loop0: rw=0, want=285330, limit=285320
>[   37.609523] attempt to access beyond end of device
>[   37.609527] loop0: rw=0, want=285332, limit=285320
>[   37.609531] attempt to access beyond end of device
>[   37.609535] loop0: rw=0, want=285334, limit=285320
>[   37.609539] attempt to access beyond end of device
>[   37.609543] loop0: rw=0, want=285336, limit=285320
>[   37.609547] attempt to access beyond end of device
>[   37.609550] loop0: rw=0, want=285338, limit=285320
>[   37.609554] attempt to access beyond end of device
>[   37.609558] loop0: rw=0, want=285340, limit=285320
>[   37.609562] attempt to access beyond end of device
>[   37.609566] loop0: rw=0, want=285342, limit=285320
>[   37.609570] attempt to access beyond end of device
>[   37.609573] loop0: rw=0, want=285344, limit=285320
>[   37.609577] attempt to access beyond end of device
>[   37.609581] loop0: rw=0, want=285346, limit=285320
>[   37.609585] attempt to access beyond end of device
>[   37.609588] loop0: rw=0, want=285348, limit=285320
>[   37.609592] attempt to access beyond end of device
>[   37.609596] loop0: rw=0, want=285350, limit=285320
>[   37.609600] attempt to access beyond end of device
>[   37.609603] loop0: rw=0, want=285352, limit=285320
>[   37.609607] attempt to access beyond end of device
>[   37.609611] loop0: rw=0, want=285354, limit=285320
>[   37.609615] attempt to access beyond end of device
>[   37.609619] loop0: rw=0, want=285356, limit=285320
>[   37.609623] attempt to access beyond end of device
>[   37.609626] loop0: rw=0, want=285358, limit=285320
>[   37.609630] attempt to access beyond end of device
>[   37.609634] loop0: rw=0, want=285360, limit=285320
>[   37.609638] attempt to access beyond end of device
>[   37.609641] loop0: rw=0, want=285362, limit=285320
>[   37.609645] attempt to access beyond end of device
>[   37.609649] loop0: rw=0, want=285364, limit=285320
>[   37.609653] attempt to access beyond end of device
>[   37.609656] loop0: rw=0, want=285366, limit=285320
>[   37.609660] attempt to access beyond end of device
>[   37.609664] loop0: rw=0, want=285368, limit=285320
>[   37.609668] attempt to access beyond end of device
>[   37.609672] loop0: rw=0, want=285370, limit=285320
>[   37.609676] attempt to access beyond end of device
>[   37.609679] loop0: rw=0, want=285372, limit=285320
>[   37.609683] attempt to access beyond end of device
>[   37.609687] loop0: rw=0, want=285374, limit=285320
>[   37.609691] attempt to access beyond end of device
>[   37.609694] loop0: rw=0, want=285376, limit=285320
>[   37.609698] attempt to access beyond end of device
>[   37.609702] loop0: rw=0, want=285378, limit=285320
>[   37.609706] attempt to access beyond end of device
>[   37.609710] loop0: rw=0, want=285380, limit=285320
>[   37.609714] attempt to access beyond end of device
>[   37.609717] loop0: rw=0, want=285382, limit=285320
>[   37.609721] attempt to access beyond end of device
>[   37.609725] loop0: rw=0, want=285384, limit=285320
>[   37.609729] attempt to access beyond end of device
>[   37.609733] loop0: rw=0, want=285386, limit=285320
>[   37.609737] attempt to access beyond end of device
>[   37.609740] loop0: rw=0, want=285388, limit=285320
>[   37.609744] attempt to access beyond end of device
>[   37.609748] loop0: rw=0, want=285390, limit=285320
>[   37.609752] attempt to access beyond end of device
>[   37.609756] loop0: rw=0, want=285392, limit=285320
>[   37.609760] attempt to access beyond end of device
>[   37.609763] loop0: rw=0, want=285394, limit=285320
>[   37.609767] attempt to access beyond end of device
>[   37.609771] loop0: rw=0, want=285396, limit=285320
>[   37.609775] attempt to access beyond end of device
>[   37.609779] loop0: rw=0, want=285398, limit=285320
>[   37.609783] attempt to access beyond end of device
>[   37.609786] loop0: rw=0, want=285400, limit=285320
>[   37.609790] attempt to access beyond end of device
>[   37.609794] loop0: rw=0, want=285402, limit=285320
>[   37.609798] attempt to access beyond end of device
>[   37.609802] loop0: rw=0, want=285404, limit=285320
>[   37.609806] attempt to access beyond end of device
>[   37.609810] loop0: rw=0, want=285406, limit=285320
>[   37.609814] attempt to access beyond end of device
>[   37.609817] loop0: rw=0, want=285408, limit=285320
>[   37.609821] attempt to access beyond end of device
>[   37.609825] loop0: rw=0, want=285410, limit=285320
>[   37.609829] attempt to access beyond end of device
>[   37.609833] loop0: rw=0, want=285412, limit=285320
>[   37.609837] attempt to access beyond end of device
>[   37.609840] loop0: rw=0, want=285414, limit=285320
>[   37.609844] attempt to access beyond end of device
>[   37.609848] loop0: rw=0, want=285416, limit=285320
>[   37.609852] attempt to access beyond end of device
>[   37.609856] loop0: rw=0, want=285418, limit=285320
>[   37.609860] attempt to access beyond end of device
>[   37.609863] loop0: rw=0, want=285420, limit=285320
>[   37.609867] attempt to access beyond end of device
>[   37.609871] loop0: rw=0, want=285422, limit=285320
>[   37.609875] attempt to access beyond end of device
>[   37.609879] loop0: rw=0, want=285424, limit=285320
>[   37.609883] attempt to access beyond end of device
>[   37.609886] loop0: rw=0, want=285426, limit=285320
>[   37.609890] attempt to access beyond end of device
>[   37.609894] loop0: rw=0, want=285428, limit=285320
>[   37.609898] attempt to access beyond end of device
>[   37.609901] loop0: rw=0, want=285430, limit=285320
>[   37.609905] attempt to access beyond end of device
>[   37.609909] loop0: rw=0, want=285432, limit=285320
>[   37.609913] attempt to access beyond end of device
>[   37.609917] loop0: rw=0, want=285434, limit=285320
>[   37.609921] attempt to access beyond end of device
>[   37.609924] loop0: rw=0, want=285436, limit=285320
>[   37.609928] attempt to access beyond end of device
>[   37.609932] loop0: rw=0, want=285438, limit=285320
>[   37.609936] attempt to access beyond end of device
>[   37.609940] loop0: rw=0, want=285440, limit=285320
>[   37.609958] attempt to access beyond end of device
>[   37.609962] loop0: rw=0, want=285322, limit=285320
>[   37.609966] attempt to access beyond end of device
>[   37.609970] loop0: rw=0, want=285324, limit=285320
>[   37.609973] attempt to access beyond end of device
>[   37.609977] loop0: rw=0, want=285326, limit=285320
>[   37.609981] attempt to access beyond end of device
>[   37.609985] loop0: rw=0, want=285328, limit=285320
>[   37.609989] attempt to access beyond end of device
>[   37.609992] loop0: rw=0, want=285330, limit=285320
>[   37.609997] attempt to access beyond end of device
>[   37.610000] loop0: rw=0, want=285332, limit=285320
>[   37.610004] attempt to access beyond end of device
>[   37.610008] loop0: rw=0, want=285334, limit=285320
>[   37.610012] attempt to access beyond end of device
>[   37.610015] loop0: rw=0, want=285336, limit=285320
>[   37.610019] attempt to access beyond end of device
>[   37.610023] loop0: rw=0, want=285338, limit=285320
>[   37.610027] attempt to access beyond end of device
>[   37.610031] loop0: rw=0, want=285340, limit=285320
>[   37.610035] attempt to access beyond end of device
>[   37.610038] loop0: rw=0, want=285342, limit=285320
>[   37.610042] attempt to access beyond end of device
>[   37.610046] loop0: rw=0, want=285344, limit=285320
>[   37.610050] attempt to access beyond end of device
>[   37.610053] loop0: rw=0, want=285346, limit=285320
>[   37.610057] attempt to access beyond end of device
>[   37.610061] loop0: rw=0, want=285348, limit=285320
>[   37.610065] attempt to access beyond end of device
>[   37.610069] loop0: rw=0, want=285350, limit=285320
>[   37.610073] attempt to access beyond end of device
>[   37.610076] loop0: rw=0, want=285352, limit=285320
>[   37.610080] attempt to access beyond end of device
>[   37.610084] loop0: rw=0, want=285354, limit=285320
>[   37.610088] attempt to access beyond end of device
>[   37.610092] loop0: rw=0, want=285356, limit=285320
>[   37.610096] attempt to access beyond end of device
>[   37.610099] loop0: rw=0, want=285358, limit=285320
>[   37.610103] attempt to access beyond end of device
>[   37.610107] loop0: rw=0, want=285360, limit=285320
>[   37.610111] attempt to access beyond end of device
>[   37.610115] loop0: rw=0, want=285362, limit=285320
>[   37.610119] attempt to access beyond end of device
>[   37.610122] loop0: rw=0, want=285364, limit=285320
>[   37.610126] attempt to access beyond end of device
>[   37.610130] loop0: rw=0, want=285366, limit=285320
>[   37.610134] attempt to access beyond end of device
>[   37.610138] loop0: rw=0, want=285368, limit=285320
>[   37.610142] attempt to access beyond end of device
>[   37.610145] loop0: rw=0, want=285370, limit=285320
>[   37.610149] attempt to access beyond end of device
>[   37.610153] loop0: rw=0, want=285372, limit=285320
>[   37.610157] attempt to access beyond end of device
>[   37.610160] loop0: rw=0, want=285374, limit=285320
>[   37.610164] attempt to access beyond end of device
>[   37.610168] loop0: rw=0, want=285376, limit=285320
>[   37.610172] attempt to access beyond end of device
>[   37.610176] loop0: rw=0, want=285378, limit=285320
>[   37.610180] attempt to access beyond end of device
>[   37.610184] loop0: rw=0, want=285380, limit=285320
>[   37.610188] attempt to access beyond end of device
>[   37.610191] loop0: rw=0, want=285382, limit=285320
>[   37.610195] attempt to access beyond end of device
>[   37.610199] loop0: rw=0, want=285384, limit=285320
>[   37.610203] attempt to access beyond end of device
>[   37.610207] loop0: rw=0, want=285386, limit=285320
>[   37.610211] attempt to access beyond end of device
>[   37.610214] loop0: rw=0, want=285388, limit=285320
>[   37.610218] attempt to access beyond end of device
>[   37.610222] loop0: rw=0, want=285390, limit=285320
>[   37.610226] attempt to access beyond end of device
>[   37.610230] loop0: rw=0, want=285392, limit=285320
>[   37.610234] attempt to access beyond end of device
>[   37.610237] loop0: rw=0, want=285394, limit=285320
>[   37.610241] attempt to access beyond end of device
>[   37.610245] loop0: rw=0, want=285396, limit=285320
>[   37.610249] attempt to access beyond end of device
>[   37.610253] loop0: rw=0, want=285398, limit=285320
>[   37.610256] attempt to access beyond end of device
>[   37.610260] loop0: rw=0, want=285400, limit=285320
>[   37.610264] attempt to access beyond end of device
>[   37.610268] loop0: rw=0, want=285402, limit=285320
>[   37.610272] attempt to access beyond end of device
>[   37.610275] loop0: rw=0, want=285404, limit=285320
>[   37.610279] attempt to access beyond end of device
>[   37.610283] loop0: rw=0, want=285406, limit=285320
>[   37.610287] attempt to access beyond end of device
>[   37.610290] loop0: rw=0, want=285408, limit=285320
>[   37.610294] attempt to access beyond end of device
>[   37.610298] loop0: rw=0, want=285410, limit=285320
>[   37.610302] attempt to access beyond end of device
>[   37.610306] loop0: rw=0, want=285412, limit=285320
>[   37.610310] attempt to access beyond end of device
>[   37.610313] loop0: rw=0, want=285414, limit=285320
>[   37.610317] attempt to access beyond end of device
>[   37.610321] loop0: rw=0, want=285416, limit=285320
>[   37.610325] attempt to access beyond end of device
>[   37.610329] loop0: rw=0, want=285418, limit=285320
>[   37.610333] attempt to access beyond end of device
>[   37.610336] loop0: rw=0, want=285420, limit=285320
>[   37.610340] attempt to access beyond end of device
>[   37.610344] loop0: rw=0, want=285422, limit=285320
>[   37.610348] attempt to access beyond end of device
>[   37.610351] loop0: rw=0, want=285424, limit=285320
>[   37.610355] attempt to access beyond end of device
>[   37.610359] loop0: rw=0, want=285426, limit=285320
>[   37.610363] attempt to access beyond end of device
>[   37.610367] loop0: rw=0, want=285428, limit=285320
>[   37.610370] attempt to access beyond end of device
>[   37.610374] loop0: rw=0, want=285430, limit=285320
>[   37.610378] attempt to access beyond end of device
>[   37.610382] loop0: rw=0, want=285432, limit=285320
>[   37.610386] attempt to access beyond end of device
>[   37.610389] loop0: rw=0, want=285434, limit=285320
>[   37.610393] attempt to access beyond end of device
>[   37.610397] loop0: rw=0, want=285436, limit=285320
>[   37.610401] attempt to access beyond end of device
>[   37.610405] loop0: rw=0, want=285438, limit=285320
>[   37.610409] attempt to access beyond end of device
>[   37.610412] loop0: rw=0, want=285440, limit=285320
>[   37.610434] attempt to access beyond end of device
>[   37.610437] loop0: rw=0, want=285322, limit=285320
>[   37.610441] attempt to access beyond end of device
>[   37.610445] loop0: rw=0, want=285324, limit=285320
>[   37.610449] attempt to access beyond end of device
>[   37.610453] loop0: rw=0, want=285326, limit=285320
>[   37.610457] attempt to access beyond end of device
>[   37.610460] loop0: rw=0, want=285328, limit=285320
>[   37.610464] attempt to access beyond end of device
>[   37.610468] loop0: rw=0, want=285330, limit=285320
>[   37.610472] attempt to access beyond end of device
>[   37.610476] loop0: rw=0, want=285332, limit=285320
>[   37.610479] attempt to access beyond end of device
>[   37.610483] loop0: rw=0, want=285334, limit=285320
>[   37.610487] attempt to access beyond end of device
>[   37.610491] loop0: rw=0, want=285336, limit=285320
>[   37.610495] attempt to access beyond end of device
>[   37.610499] loop0: rw=0, want=285338, limit=285320
>[   37.610503] attempt to access beyond end of device
>[   37.610506] loop0: rw=0, want=285340, limit=285320
>[   37.610510] attempt to access beyond end of device
>[   37.610514] loop0: rw=0, want=285342, limit=285320
>[   37.610518] attempt to access beyond end of device
>[   37.610521] loop0: rw=0, want=285344, limit=285320
>[   37.610525] attempt to access beyond end of device
>[   37.610529] loop0: rw=0, want=285346, limit=285320
>[   37.610533] attempt to access beyond end of device
>[   37.610537] loop0: rw=0, want=285348, limit=285320
>[   37.610541] attempt to access beyond end of device
>[   37.610544] loop0: rw=0, want=285350, limit=285320
>[   37.610548] attempt to access beyond end of device
>[   37.610552] loop0: rw=0, want=285352, limit=285320
>[   37.610556] attempt to access beyond end of device
>[   37.610560] loop0: rw=0, want=285354, limit=285320
>[   37.610564] attempt to access beyond end of device
>[   37.610567] loop0: rw=0, want=285356, limit=285320
>[   37.610571] attempt to access beyond end of device
>[   37.610575] loop0: rw=0, want=285358, limit=285320
>[   37.610579] attempt to access beyond end of device
>[   37.610583] loop0: rw=0, want=285360, limit=285320
>[   37.610587] attempt to access beyond end of device
>[   37.610590] loop0: rw=0, want=285362, limit=285320
>[   37.610594] attempt to access beyond end of device
>[   37.610598] loop0: rw=0, want=285364, limit=285320
>[   37.610602] attempt to access beyond end of device
>[   37.610606] loop0: rw=0, want=285366, limit=285320
>[   37.610609] attempt to access beyond end of device
>[   37.610613] loop0: rw=0, want=285368, limit=285320
>[   37.610617] attempt to access beyond end of device
>[   37.610621] loop0: rw=0, want=285370, limit=285320
>[   37.610625] attempt to access beyond end of device
>[   37.610628] loop0: rw=0, want=285372, limit=285320
>[   37.610633] attempt to access beyond end of device
>[   37.610636] loop0: rw=0, want=285374, limit=285320
>[   37.610640] attempt to access beyond end of device
>[   37.610644] loop0: rw=0, want=285376, limit=285320
>[   37.610648] attempt to access beyond end of device
>[   37.610651] loop0: rw=0, want=285378, limit=285320
>[   37.610655] attempt to access beyond end of device
>[   37.610659] loop0: rw=0, want=285380, limit=285320
>[   37.610663] attempt to access beyond end of device
>[   37.610667] loop0: rw=0, want=285382, limit=285320
>[   37.610671] attempt to access beyond end of device
>[   37.610674] loop0: rw=0, want=285384, limit=285320
>[   37.610678] attempt to access beyond end of device
>[   37.610682] loop0: rw=0, want=285386, limit=285320
>[   37.610686] attempt to access beyond end of device
>[   37.610689] loop0: rw=0, want=285388, limit=285320
>[   37.610693] attempt to access beyond end of device
>[   37.610697] loop0: rw=0, want=285390, limit=285320
>[   37.610701] attempt to access beyond end of device
>[   37.610705] loop0: rw=0, want=285392, limit=285320
>[   37.610709] attempt to access beyond end of device
>[   37.610712] loop0: rw=0, want=285394, limit=285320
>[   37.610716] attempt to access beyond end of device
>[   37.610720] loop0: rw=0, want=285396, limit=285320
>[   37.610724] attempt to access beyond end of device
>[   37.610728] loop0: rw=0, want=285398, limit=285320
>[   37.610732] attempt to access beyond end of device
>[   37.610735] loop0: rw=0, want=285400, limit=285320
>[   37.610739] attempt to access beyond end of device
>[   37.610743] loop0: rw=0, want=285402, limit=285320
>[   37.610747] attempt to access beyond end of device
>[   37.610750] loop0: rw=0, want=285404, limit=285320
>[   37.610754] attempt to access beyond end of device
>[   37.610758] loop0: rw=0, want=285406, limit=285320
>[   37.610762] attempt to access beyond end of device
>[   37.610766] loop0: rw=0, want=285408, limit=285320
>[   37.610770] attempt to access beyond end of device
>[   37.610773] loop0: rw=0, want=285410, limit=285320
>[   37.610777] attempt to access beyond end of device
>[   37.610781] loop0: rw=0, want=285412, limit=285320
>[   37.610785] attempt to access beyond end of device
>[   37.610789] loop0: rw=0, want=285414, limit=285320
>[   37.610793] attempt to access beyond end of device
>[   37.610796] loop0: rw=0, want=285416, limit=285320
>[   37.610800] attempt to access beyond end of device
>[   37.610804] loop0: rw=0, want=285418, limit=285320
>[   37.610808] attempt to access beyond end of device
>[   37.610812] loop0: rw=0, want=285420, limit=285320
>[   37.610816] attempt to access beyond end of device
>[   37.610820] loop0: rw=0, want=285422, limit=285320
>[   37.610824] attempt to access beyond end of device
>[   37.610827] loop0: rw=0, want=285424, limit=285320
>[   37.610831] attempt to access beyond end of device
>[   37.610835] loop0: rw=0, want=285426, limit=285320
>[   37.610839] attempt to access beyond end of device
>[   37.610843] loop0: rw=0, want=285428, limit=285320
>[   37.610847] attempt to access beyond end of device
>[   37.610850] loop0: rw=0, want=285430, limit=285320
>[   37.610854] attempt to access beyond end of device
>[   37.610858] loop0: rw=0, want=285432, limit=285320
>[   37.610862] attempt to access beyond end of device
>[   37.610866] loop0: rw=0, want=285434, limit=285320
>[   37.610870] attempt to access beyond end of device
>[   37.610873] loop0: rw=0, want=285436, limit=285320
>[   37.610877] attempt to access beyond end of device
>[   37.610881] loop0: rw=0, want=285438, limit=285320
>[   37.610885] attempt to access beyond end of device
>[   37.610888] loop0: rw=0, want=285440, limit=285320
>[   37.742806] cfg80211: Calling CRDA to update world regulatory domain
>[   39.220961] [drm] nouveau 0000:f0:10.0: Detected an NV30 generation card (0x034100b1)
>[   39.220979] checking generic (98004000 20d000) vs hw (98000000 8000000)
>[   39.220984] fb: conflicting fb hw usage nouveaufb vs OFfb NVDA,Displ - removing generic driver
>[   39.221043] Console: switching to colour dummy device 80x25
>[   39.224361] [drm] nouveau 0000:f0:10.0: OF bios successfully copied (2403 bytes)
>[   39.224572] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PRAMIN
>[   39.264179] [drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[   39.264183] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PROM
>[   39.400467] [drm] nouveau 0000:f0:10.0: ... BIOS checksum invalid
>[   39.400472] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from PCIROM
>[   39.400546] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[   39.400550] [drm] nouveau 0000:f0:10.0: Attempting to load BIOS image from ACPI
>[   39.400554] [drm] nouveau 0000:f0:10.0: ... BIOS signature not found
>[   39.400558] [drm] nouveau 0000:f0:10.0: Using BIOS image from PRAMIN
>[   39.440146] [drm] nouveau 0000:f0:10.0: BMP BIOS found
>[   39.440150] [drm] nouveau 0000:f0:10.0: BMP version 5.39
>[   39.440155] [drm] nouveau 0000:f0:10.0: Bios version 04.34.20.19
>[   39.440274] i2c i2c-5: therm_pm72: attach_adapter method is deprecated
>[   39.440279] i2c i2c-5: Please use another way to instantiate your i2c_client
>[   39.440325] i2c i2c-6: therm_pm72: attach_adapter method is deprecated
>[   39.440329] i2c i2c-6: Please use another way to instantiate your i2c_client
>[   39.440370] i2c i2c-7: therm_pm72: attach_adapter method is deprecated
>[   39.440373] i2c i2c-7: Please use another way to instantiate your i2c_client
>[   39.440434] i2c i2c-8: therm_pm72: attach_adapter method is deprecated
>[   39.440438] i2c i2c-8: Please use another way to instantiate your i2c_client
>[   39.440479] i2c i2c-9: therm_pm72: attach_adapter method is deprecated
>[   39.440483] i2c i2c-9: Please use another way to instantiate your i2c_client
>[   39.440567] i2c i2c-10: therm_pm72: attach_adapter method is deprecated
>[   39.440571] i2c i2c-10: Please use another way to instantiate your i2c_client
>[   39.440618] i2c i2c-11: therm_pm72: attach_adapter method is deprecated
>[   39.440622] i2c i2c-11: Please use another way to instantiate your i2c_client
>[   39.440666] i2c i2c-12: therm_pm72: attach_adapter method is deprecated
>[   39.440670] i2c i2c-12: Please use another way to instantiate your i2c_client
>[   39.440713] i2c i2c-13: therm_pm72: attach_adapter method is deprecated
>[   39.440717] i2c i2c-13: Please use another way to instantiate your i2c_client
>[   39.440761] i2c i2c-14: therm_pm72: attach_adapter method is deprecated
>[   39.440765] i2c i2c-14: Please use another way to instantiate your i2c_client
>[   39.440808] i2c i2c-15: therm_pm72: attach_adapter method is deprecated
>[   39.440812] i2c i2c-15: Please use another way to instantiate your i2c_client
>[   39.440856] i2c i2c-16: therm_pm72: attach_adapter method is deprecated
>[   39.440860] i2c i2c-16: Please use another way to instantiate your i2c_client
>[   39.440903] i2c i2c-17: therm_pm72: attach_adapter method is deprecated
>[   39.440907] i2c i2c-17: Please use another way to instantiate your i2c_client
>[   39.440950] i2c i2c-18: therm_pm72: attach_adapter method is deprecated
>[   39.440954] i2c i2c-18: Please use another way to instantiate your i2c_client
>[   39.440999] i2c i2c-19: therm_pm72: attach_adapter method is deprecated
>[   39.441003] i2c i2c-19: Please use another way to instantiate your i2c_client
>[   39.441057] [drm] nouveau 0000:f0:10.0: MXM: no VBIOS data, nothing to do
>[   39.441062] [drm] nouveau 0000:f0:10.0: DCB version 2.2
>[   39.441067] [drm] nouveau 0000:f0:10.0: DCB outp 00: 01100102 00000000
>[   39.441072] [drm] nouveau 0000:f0:10.0: DCB outp 01: 01000100 000088b8
>[   39.441076] [drm] nouveau 0000:f0:10.0: DCB outp 02: 02110212 11b00000
>[   39.441081] [drm] nouveau 0000:f0:10.0: DCB outp 03: 02010210 11b088b8
>[   39.441085] [drm] nouveau 0000:f0:10.0: DCB outp 04: 02010211 11b00003
>[   39.441398] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 0 at offset 0x020A
>[   39.443438] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 1 at offset 0x0457
>[   39.443450] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 2 at offset 0x059D
>[   39.443496] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 3 at offset 0x0723
>[   39.443503] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 4 at offset 0x0740
>[   39.443510] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 5 at offset 0x075D
>[   39.444833] [drm] nouveau 0000:f0:10.0: Parsing VBIOS init table 6 at offset 0x08E2
>[   40.577451] [drm] nouveau 0000:f0:10.0: 0 available performance level(s)
>[   40.577482] [drm] nouveau 0000:f0:10.0: c: core 300MHz memory 553MHz
>[   40.577971] [TTM] Zone  kernel: Available graphics memory: 2039648 kiB.
>[   40.577976] [TTM] Initializing pool allocator.
>[   40.577986] [TTM] Initializing DMA pool allocator.
>[   40.578022] [drm] nouveau 0000:f0:10.0: Detected 64MiB VRAM
>[   40.580640] [drm] nouveau 0000:f0:10.0: 64 MiB GART (aperture)
>[   40.582874] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[   40.582879] [drm] No driver support for vblank timestamp query.
>[   40.584756] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on tmds encoder (output 0)
>[   40.584765] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on vga encoder (output 1)
>[   40.584770] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on tmds encoder (output 2)
>[   40.584774] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on vga encoder (output 3)
>[   40.584780] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on TV encoder (output 4)
>[   40.736889] [drm] nouveau 0000:f0:10.0: Load detected on output B
>[   40.737126] [drm] nouveau 0000:f0:10.0: allocated 720x576 fb: 0x70000, bo c000000163a43800
>[   40.747861] [drm] nouveau 0000:f0:10.0: Setting dpms mode 0 on TV encoder (output 4)
>[   40.747872] [drm] nouveau 0000:f0:10.0: Output TV-1 is running on CRTC 1 using output B
>[   40.747885] Console: switching to colour frame buffer device 90x36
>[   40.748794] fb0: nouveaufb frame buffer device
>[   40.748797] drm: registered panic notifier
>[   40.748810] [drm] Initialized nouveau 0.0.16 20090420 for 0000:f0:10.0 on minor 0
>[   40.775921] rt2800pci 0001:05:04.0: enabling device (0004 -> 0006)
>[   40.906996] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   40.907566] Registered led device: rt2800pci-phy0::radio
>[   40.907603] Registered led device: rt2800pci-phy0::assoc
>[   40.907638] Registered led device: rt2800pci-phy0::quality
>[   42.753297] audit_printk_skb: 540 callbacks suppressed
>[   42.753303] type=1400 audit(1339965311.639:6): avc:  denied  { execute } for  pid=536 comm="bash" name="hostname" dev="dm-0" ino=8456 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:hostname_exec_t:s0 tclass=file
>[   42.753325] type=1400 audit(1339965311.639:7): avc:  denied  { read open } for  pid=536 comm="bash" name="hostname" dev="dm-0" ino=8456 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:hostname_exec_t:s0 tclass=file
>[   42.753511] type=1400 audit(1339965311.639:8): avc:  denied  { execute_no_trans } for  pid=536 comm="bash" path="/usr/bin/hostname" dev="dm-0" ino=8456 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:hostname_exec_t:s0 tclass=file
>[   43.291204] type=1400 audit(1339965312.179:9): avc:  denied  { read } for  pid=532 comm="bash" name=".profile" dev="dm-0" ino=40962 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:admin_home_t:s0 tclass=file
>[   43.291229] type=1400 audit(1339965312.179:10): avc:  denied  { open } for  pid=532 comm="bash" name=".profile" dev="dm-0" ino=40962 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:admin_home_t:s0 tclass=file
>[   43.591266] type=1400 audit(1339965312.479:11): avc:  denied  { read } for  pid=532 comm="bash" name="linux" dev="dm-0" ino=25379 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:usr_t:s0 tclass=file
>[   43.591356] type=1400 audit(1339965312.479:12): avc:  denied  { open } for  pid=532 comm="bash" name="linux" dev="dm-0" ino=25379 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:usr_t:s0 tclass=file
>[   43.591392] type=1400 audit(1339965312.479:13): avc:  denied  { getattr } for  pid=532 comm="bash" path="/usr/share/terminfo/l/linux" dev="dm-0" ino=25379 scontext=system_u:system_r:getty_t:s0 tcontext=unconfined_u:object_r:usr_t:s0 tclass=file
>[   48.456923] phy0 -> rt2x00pci_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0xffffff01
>[   48.497350] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   48.567288] sungem_phy: PHY ID: 2062e0, addr: 1
>[   48.567542] gem 0001:03:0f.0: eth0: Found BCM5421-K2 PHY
>[   48.568020] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   50.967043] gem 0001:03:0f.0: eth0: Link is up at 1000 Mbps, full-duplex
>[   50.967159] gem 0001:03:0f.0: eth0: Pause is disabled
>[   50.967401] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   62.166883] eth0: no IPv6 routers present
>[   68.318421] type=1400 audit(1339965337.209:14): avc:  denied  { append } for  pid=580 comm="auditd" path="/tmp/anaconda.log" dev="dm-0" ino=74623 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:initrc_tmp_t:s0 tclass=file
>[   68.318989] type=1400 audit(1339965337.209:15): avc:  denied  { read write } for  pid=580 comm="auditd" path="/dev/mapper/control" dev="devtmpfs" ino=1197 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:lvm_control_t:s0 tclass=chr_file
>[   68.325489] auditd (581): /proc/581/oom_adj is deprecated, please use /proc/581/oom_score_adj instead.
>[   70.506886] [drm] nouveau 0000:f0:10.0: Load detected on output B
>[   70.716885] [drm] nouveau 0000:f0:10.0: Load detected on output B
>[   70.913779] [drm] nouveau 0000:f0:10.0: Setting dpms mode 3 on TV encoder (output 4)
>[   70.934043] [drm] nouveau 0000:f0:10.0: Setting dpms mode 0 on TV encoder (output 4)
>[   70.934051] [drm] nouveau 0000:f0:10.0: Output TV-1 is running on CRTC 1 using output B
>[   77.146894] [drm] nouveau 0000:f0:10.0: Load detected on output B

Actions: View

Attachments on bug 832237: 592472