Attachment 593867 Details for Bug 834733 – dmesg of the running system where this happens

dmesg of the running system where this happens

dmesg.text (text/plain), 48.38 KB, created by Joel Rees on 2012-06-23 08:13:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joel Rees

Created: 2012-06-23 08:13:01 UTC

Size: 48.38 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 2.6.43.8-1.fc15.i686.PAE (mockbuild@x86-14.phx2.fedoraproject.org) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #1 SMP Mon Jun 4 20:21:39 UTC 2012
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000002bff0000 (usable)
>[    0.000000]  BIOS-e820: 000000002bff0000 - 000000002bff3000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000002bff3000 - 000000002c000000 (ACPI data)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>[    0.000000] DMI 2.3 present.
>[    0.000000] DMI: MICRO-STAR INTERNATIONAL CO., LTD KM266-8237/MS-7061, BIOS 6.00 PG 07/28/2004
>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>[    0.000000] last_pfn = 0x2bff0 max_arch_pfn = 0x1000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C7FFF write-protect
>[    0.000000]   C8000-FFFFF uncachable
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FE0000000 write-back
>[    0.000000]   1 base 020000000 mask FF8000000 write-back
>[    0.000000]   2 base 028000000 mask FFC000000 write-back
>[    0.000000]   3 base 0E0000000 mask FF8000000 write-combining
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] found SMP MP-table at [c00f52d0] f52d0
>[    0.000000] initial memory mapped : 0 - 01400000
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: 0000000000000000-000000002bff0000
>[    0.000000]  0000000000 - 0000200000 page 4k
>[    0.000000]  0000200000 - 002be00000 page 2M
>[    0.000000]  002be00000 - 002bff0000 page 4k
>[    0.000000] kernel direct mapping tables up to 2bff0000 @ 13f8000-1400000
>[    0.000000] RAMDISK: 20138000 - 21034000
>[    0.000000] ACPI: RSDP 000f6d90 00014 (v00 KM266 )
>[    0.000000] ACPI: RSDT 2bff3000 0002C (v01 KM266  AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: FACP 2bff3040 00074 (v01 KM266  AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: DSDT 2bff30c0 04E67 (v01 KM266  AWRDACPI 00001000 MSFT 0100000E)
>[    0.000000] ACPI: FACS 2bff0000 00040
>[    0.000000] ACPI: APIC 2bff7f40 0005A (v01 KM266  AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 0MB HIGHMEM available.
>[    0.000000] 703MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 2bff0000
>[    0.000000]   low ram: 0 - 2bff0000
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA      0x00000010 -> 0x00001000
>[    0.000000]   Normal   0x00001000 -> 0x0002bff0
>[    0.000000]   HighMem  empty
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] Early memory PFN ranges
>[    0.000000]     0: 0x00000010 -> 0x0000009f
>[    0.000000]     0: 0x00000100 -> 0x0002bff0
>[    0.000000] On node 0 totalpages: 180095
>[    0.000000] free_area_init_node: node 0, pgdat c0bf4dc0, node_mem_map eba6f200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1376 pages used for memmap
>[    0.000000]   Normal zone: 174736 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x4008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>[    0.000000] Allocating PCI resources starting at 2c000000 (gap: 2c000000:d2c00000)
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 14 pages/cpu @eba5b000 s33280 r0 d24064 u57344
>[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 178687
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.43.8-1.fc15.i686.PAE ro root=UUID=6f56e069-9379-4552-91d9-e30920bbd173 rd_LVM_LV=f15/f15_swap rd_LVM_LV=vg_f11/f11swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=ja_JP.UTF-8 KEYTABLE=jp106 rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] Initializing CPU#0
>[    0.000000] allocated 1441536 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
>[    0.000000] Memory: 687152k/720832k available (5583k kernel code, 33228k reserved, 2652k data, 644k init, 0k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>[    0.000000]     pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>[    0.000000]     vmalloc : 0xec7f0000 - 0xff5fe000   ( 302 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xebff0000   ( 703 MB)
>[    0.000000]       .init : 0xc0c0c000 - 0xc0cad000   ( 644 kB)
>[    0.000000]       .data : 0xc0973ff3 - 0xc0c0b3c0   (2652 kB)
>[    0.000000]       .text : 0xc0400000 - 0xc0973ff3   (5583 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] NR_IRQS:2304 nr_irqs:256 16
>[    0.000000] CPU 0 irqstacks, hard=eb408000 soft=eb40a000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Fast TSC calibration using PIT
>[    0.000000] Detected 1833.023 MHz processor.
>[    0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.04 BogoMIPS (lpj=1833023)
>[    0.002011] pid_max: default: 32768 minimum: 301
>[    0.002055] Security Framework initialized
>[    0.002083] SELinux:  Initializing.
>[    0.002098] SELinux:  Starting in permissive mode
>[    0.002208] Mount-cache hash table entries: 512
>[    0.003256] Initializing cgroup subsys cpuacct
>[    0.003262] Initializing cgroup subsys memory
>[    0.003277] Initializing cgroup subsys devices
>[    0.003281] Initializing cgroup subsys freezer
>[    0.003285] Initializing cgroup subsys net_cls
>[    0.003289] Initializing cgroup subsys blkio
>[    0.003298] Initializing cgroup subsys perf_event
>[    0.003334] mce: CPU supports 4 MCE banks
>[    0.003421] SMP alternatives: switching to UP code
>[    0.012453] Freeing SMP alternatives: 24k freed
>[    0.012508] ACPI: Core revision 20120111
>[    0.017057] ftrace: allocating 22463 entries in 44 pages
>[    0.027176] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.028998] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.039093] CPU0: AMD Sempron(tm)   2600+ stepping 01
>[    0.039997] Performance Events: AMD PMU driver.
>[    0.039997] ... version:                0
>[    0.039997] ... bit width:              48
>[    0.039997] ... generic registers:      4
>[    0.039997] ... value mask:             0000ffffffffffff
>[    0.039997] ... max period:             00007fffffffffff
>[    0.039997] ... fixed-purpose events:   0
>[    0.039997] ... event mask:             000000000000000f
>[    0.039997] NMI watchdog enabled, takes one hw-pmu counter.
>[    0.039997] Brought up 1 CPUs
>[    0.039997] Total of 1 processors activated (3666.04 BogoMIPS).
>[    0.040452] devtmpfs: initialized
>[    0.040703] PM: Registering ACPI NVS region at 2bff0000 (12288 bytes)
>[    0.042460] atomic64 test passed for i586+ platform with CX8 and with SSE
>[    0.042513] RTC time:  6:51:46, date: 06/23/12
>[    0.042594] NET: Registered protocol family 16
>[    0.042918] ACPI: bus type pci registered
>[    0.050654] PCI: PCI BIOS revision 2.10 entry at 0xfbaf0, last bus=1
>[    0.050657] PCI: Using configuration type 1 for base access
>[    0.052481] bio: create slab <bio-0> at 0
>[    0.052619] ACPI: Added _OSI(Module Device)
>[    0.052623] ACPI: Added _OSI(Processor Device)
>[    0.052626] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.052629] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.053412] ACPI: EC: Look up EC in DSDT
>[    0.058109] ACPI: Interpreter enabled
>[    0.058130] ACPI: (supports S0 S1 S4 S5)
>[    0.058162] ACPI: Using IOAPIC for interrupt routing
>[    0.063805] ACPI: No dock devices found.
>[    0.063818] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.063908] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.064022] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>[    0.064027] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>[    0.064032] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.064036] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>[    0.064039] pci_root PNP0A03:00: host bridge window [mem 0x2c000000-0xfebfffff] (ignored)
>[    0.064044] PCI: root bus 00: using default resources
>[    0.064115] PCI host bridge to bus 0000:00
>[    0.064119] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.064123] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3ffffffff]
>[    0.064148] pci 0000:00:00.0: [1106:3205] type 0 class 0x000600
>[    0.064161] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
>[    0.064230] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604
>[    0.064270] pci 0000:00:01.0: supports D1
>[    0.064293] pci 0000:00:07.0: [1283:8212] type 0 class 0x000180
>[    0.064308] pci 0000:00:07.0: reg 10: [io  0xe000-0xe007]
>[    0.064317] pci 0000:00:07.0: reg 14: [io  0xe100-0xe103]
>[    0.064326] pci 0000:00:07.0: reg 18: [io  0xe200-0xe207]
>[    0.064335] pci 0000:00:07.0: reg 1c: [io  0xe300-0xe303]
>[    0.064344] pci 0000:00:07.0: reg 20: [io  0xe400-0xe40f]
>[    0.064359] pci 0000:00:07.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>[    0.064404] pci 0000:00:0f.0: [1106:0571] type 0 class 0x000101
>[    0.064445] pci 0000:00:0f.0: reg 20: [io  0xe500-0xe50f]
>[    0.064499] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
>[    0.064538] pci 0000:00:10.0: reg 20: [io  0xe600-0xe61f]
>[    0.064572] pci 0000:00:10.0: supports D1 D2
>[    0.064575] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.064598] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
>[    0.064637] pci 0000:00:10.1: reg 20: [io  0xe700-0xe71f]
>[    0.064671] pci 0000:00:10.1: supports D1 D2
>[    0.064674] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.064699] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
>[    0.064737] pci 0000:00:10.2: reg 20: [io  0xe800-0xe81f]
>[    0.064771] pci 0000:00:10.2: supports D1 D2
>[    0.064774] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.064795] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
>[    0.064834] pci 0000:00:10.3: reg 20: [io  0xe900-0xe91f]
>[    0.064868] pci 0000:00:10.3: supports D1 D2
>[    0.064871] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.064892] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
>[    0.064907] pci 0000:00:10.4: reg 10: [mem 0xee021000-0xee0210ff]
>[    0.064965] pci 0000:00:10.4: supports D1 D2
>[    0.064968] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.065000] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
>[    0.065055] HPET not enabled in BIOS. You might try hpet=force boot option
>[    0.065101] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
>[    0.065117] pci 0000:00:11.5: reg 10: [io  0xea00-0xeaff]
>[    0.065178] pci 0000:00:11.5: supports D1 D2
>[    0.065200] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
>[    0.065215] pci 0000:00:12.0: reg 10: [io  0xeb00-0xebff]
>[    0.065225] pci 0000:00:12.0: reg 14: [mem 0xee020000-0xee0200ff]
>[    0.065278] pci 0000:00:12.0: supports D1 D2
>[    0.065281] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.065337] pci 0000:01:00.0: [1106:7205] type 0 class 0x000300
>[    0.065351] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
>[    0.065360] pci 0000:01:00.0: reg 14: [mem 0xec000000-0xecffffff]
>[    0.065387] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>[    0.065411] pci 0000:01:00.0: supports D1 D2
>[    0.065441] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    0.065449] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xedffffff]
>[    0.065454] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xebffffff pref]
>[    0.065462] pci_bus 0000:00: on NUMA node 0
>[    0.065468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.065786]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
>[    0.085959] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
>[    0.086093] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
>[    0.086218] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
>[    0.086321] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>[    0.086417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>[    0.086509] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>[    0.086599] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>[    0.086690] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>[    0.086818] ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
>[    0.086934] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
>[    0.087056] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
>[    0.087196] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
>[    0.087422] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.087426] vgaarb: loaded
>[    0.087429] vgaarb: bridge control possible 0000:01:00.0
>[    0.087620] SCSI subsystem initialized
>[    0.087735] libata version 3.00 loaded.
>[    0.087837] usbcore: registered new interface driver usbfs
>[    0.087864] usbcore: registered new interface driver hub
>[    0.087912] usbcore: registered new device driver usb
>[    0.088031] PCI: Using ACPI for IRQ routing
>[    0.088039] PCI: pci_cache_line_size set to 32 bytes
>[    0.088099] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
>[    0.088103] reserve RAM buffer: 000000002bff0000 - 000000002bffffff 
>[    0.088311] NetLabel: Initializing
>[    0.088314] NetLabel:  domain hash size = 128
>[    0.088316] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.088337] NetLabel:  unlabeled traffic allowed by default
>[    0.104969] pnp: PnP ACPI init
>[    0.105028] ACPI: bus type pnp registered
>[    0.105320] pnp 00:00: [mem 0x000c9a00-0x000cbfff]
>[    0.105325] pnp 00:00: [mem 0x000f0000-0x000f7fff]
>[    0.105328] pnp 00:00: [mem 0x000f8000-0x000fbfff]
>[    0.105332] pnp 00:00: [mem 0x000fc000-0x000fffff]
>[    0.105335] pnp 00:00: [mem 0x2bff0000-0x2bffffff]
>[    0.105338] pnp 00:00: [mem 0xffff0000-0xffffffff]
>[    0.105342] pnp 00:00: [mem 0x00000000-0x0009ffff]
>[    0.105356] pnp 00:00: [mem 0x00100000-0x2bfeffff]
>[    0.105359] pnp 00:00: [mem 0xfec00000-0xfec00fff]
>[    0.105363] pnp 00:00: [mem 0xfee00000-0xfee00fff]
>[    0.105366] pnp 00:00: [mem 0xfff80000-0xfffeffff]
>[    0.105461] system 00:00: [mem 0x000c9a00-0x000cbfff] has been reserved
>[    0.105466] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
>[    0.105471] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
>[    0.105475] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
>[    0.105479] system 00:00: [mem 0x2bff0000-0x2bffffff] could not be reserved
>[    0.105484] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
>[    0.105488] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.105492] system 00:00: [mem 0x00100000-0x2bfeffff] could not be reserved
>[    0.105496] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.105500] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.105504] system 00:00: [mem 0xfff80000-0xfffeffff] has been reserved
>[    0.105511] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.105598] pnp 00:01: [bus 00-ff]
>[    0.105602] pnp 00:01: [io  0x0cf8-0x0cff]
>[    0.105606] pnp 00:01: [io  0x0000-0x0cf7 window]
>[    0.105610] pnp 00:01: [io  0x0d00-0xffff window]
>[    0.105613] pnp 00:01: [mem 0x000a0000-0x000bffff window]
>[    0.105617] pnp 00:01: [mem 0x000c0000-0x000dffff window]
>[    0.105621] pnp 00:01: [mem 0x2c000000-0xfebfffff window]
>[    0.105699] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
>[    0.105731] pnp 00:02: [io  0x4000-0x407f]
>[    0.105735] pnp 00:02: [io  0x5000-0x500f]
>[    0.105783] system 00:02: [io  0x4000-0x407f] has been reserved
>[    0.105788] system 00:02: [io  0x5000-0x500f] has been reserved
>[    0.105792] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.106631] pnp 00:03: [io  0x0010-0x001f]
>[    0.106635] pnp 00:03: [io  0x0022-0x003f]
>[    0.106638] pnp 00:03: [io  0x0044-0x005f]
>[    0.106641] pnp 00:03: [io  0x0062-0x0063]
>[    0.106644] pnp 00:03: [io  0x0065-0x006f]
>[    0.106647] pnp 00:03: [io  0x0074-0x007f]
>[    0.106649] pnp 00:03: [io  0x0091-0x0093]
>[    0.106652] pnp 00:03: [io  0x00a2-0x00bf]
>[    0.106655] pnp 00:03: [io  0x00e0-0x00ef]
>[    0.106658] pnp 00:03: [io  0x04d0-0x04d1]
>[    0.106661] pnp 00:03: [io  0x0294-0x0297]
>[    0.106724] system 00:03: [io  0x04d0-0x04d1] has been reserved
>[    0.106728] system 00:03: [io  0x0294-0x0297] has been reserved
>[    0.106733] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.106755] pnp 00:04: [dma 4]
>[    0.106758] pnp 00:04: [io  0x0000-0x000f]
>[    0.106762] pnp 00:04: [io  0x0080-0x0090]
>[    0.106765] pnp 00:04: [io  0x0094-0x009f]
>[    0.106768] pnp 00:04: [io  0x00c0-0x00df]
>[    0.106815] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.106834] pnp 00:05: [io  0x0070-0x0073]
>[    0.106855] pnp 00:05: [irq 8]
>[    0.106895] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.106910] pnp 00:06: [io  0x0061]
>[    0.106957] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.106973] pnp 00:07: [io  0x00f0-0x00ff]
>[    0.106981] pnp 00:07: [irq 13]
>[    0.107032] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.107178] pnp 00:08: [io  0x03f2-0x03f5]
>[    0.107181] pnp 00:08: [io  0x03f7]
>[    0.107189] pnp 00:08: [irq 6]
>[    0.107192] pnp 00:08: [dma 2]
>[    0.107256] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
>[    0.107451] pnp 00:09: [io  0x03f8-0x03ff]
>[    0.107459] pnp 00:09: [irq 4]
>[    0.107552] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.107772] pnp 00:0a: [io  0x02f8-0x02ff]
>[    0.107780] pnp 00:0a: [irq 3]
>[    0.107871] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.108309] pnp 00:0b: [io  0x0378-0x037f]
>[    0.108313] pnp 00:0b: [io  0x0778-0x077b]
>[    0.108321] pnp 00:0b: [irq 7]
>[    0.108324] pnp 00:0b: [dma 3]
>[    0.108424] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
>[    0.108510] pnp 00:0c: [irq 12]
>[    0.108555] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.108592] pnp 00:0d: [io  0x0060]
>[    0.108595] pnp 00:0d: [io  0x0064]
>[    0.108603] pnp 00:0d: [irq 1]
>[    0.108655] pnp 00:0d: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.108692] pnp: PnP ACPI: found 14 devices
>[    0.108696] ACPI: ACPI bus type pnp unregistered
>[    0.146481] Switching to clocksource acpi_pm
>[    0.146523] PCI: max bus depth: 1 pci_try_num: 2
>[    0.146567] pci 0000:00:07.0: BAR 6: assigned [mem 0x2c000000-0x2c01ffff pref]
>[    0.146574] pci 0000:01:00.0: BAR 6: assigned [mem 0xed000000-0xed00ffff pref]
>[    0.146579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
>[    0.146587] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xedffffff]
>[    0.146592] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xebffffff pref]
>[    0.146610] pci 0000:00:01.0: setting latency timer to 64
>[    0.146616] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.146619] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3ffffffff]
>[    0.146624] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
>[    0.146627] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xebffffff pref]
>[    0.146716] NET: Registered protocol family 2
>[    0.146807] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[    0.146983] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.149105] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.150263] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.150268] TCP reno registered
>[    0.150278] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.150317] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.150505] NET: Registered protocol family 1
>[    0.150535] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>[    0.150825] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>[    0.150983] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
>[    0.150998] pci 0000:01:00.0: Boot video device
>[    0.151027] PCI: CLS 32 bytes, default 32
>[    0.151153] Trying to unpack rootfs image as initramfs...
>[    0.691964] Freeing initrd memory: 15344k freed
>[    0.724046] apm: BIOS not found.
>[    0.724208] Intel AES-NI instructions are not detected.
>[    0.724498] audit: initializing netlink socket (disabled)
>[    0.724526] type=2000 audit(1340434306.723:1): initialized
>[    0.749814] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.753039] VFS: Disk quotas dquot_6.5.2
>[    0.753134] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.754095] msgmni has been set to 1372
>[    0.754213] SELinux:  Registering netfilter hooks
>[    0.754961] alg: No test for stdrng (krng)
>[    0.754970] NET: Registered protocol family 38
>[    0.755115] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.755167] io scheduler noop registered
>[    0.755171] io scheduler deadline registered
>[    0.755183] io scheduler cfq registered (default)
>[    0.755440] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.755478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.755481] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.756153] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    0.756162] ACPI: Power Button [PWRB]
>[    0.756230] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>[    0.756237] ACPI: Sleep Button [SLPB]
>[    0.756309] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.756314] ACPI: Power Button [PWRF]
>[    0.756392] ACPI: Fan [FAN] (on)
>[    0.759320] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.759324] ACPI: Thermal Zone [THRM] (48 C)
>[    0.759442] GHES: HEST is not enabled!
>[    0.759466] isapnp: Scanning for PnP cards...
>[    1.115904] isapnp: No Plug & Play device found
>[    1.116089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.136573] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.157063] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.177853] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    1.198387] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>[    1.198932] Non-volatile memory driver v1.3
>[    1.198937] Linux agpgart interface v0.103
>[    1.199125] agpgart: Detected VIA KM400/KM400A chipset
>[    1.207554] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>[    1.209918] brd: module loaded
>[    1.211231] loop: module loaded
>[    1.211524] Fixed MDIO Bus: probed
>[    1.211620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.211712] ehci_hcd 0000:00:10.4: EHCI Host Controller
>[    1.211810] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>[    1.211923] ehci_hcd 0000:00:10.4: irq 21, io mem 0xee021000
>[    1.217039] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
>[    1.217101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.217106] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.217110] usb usb1: Product: EHCI Host Controller
>[    1.217113] usb usb1: Manufacturer: Linux 2.6.43.8-1.fc15.i686.PAE ehci_hcd
>[    1.217116] usb usb1: SerialNumber: 0000:00:10.4
>[    1.217297] hub 1-0:1.0: USB hub found
>[    1.217307] hub 1-0:1.0: 8 ports detected
>[    1.217433] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.217456] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.217520] uhci_hcd 0000:00:10.0: UHCI Host Controller
>[    1.217590] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>[    1.217615] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e600
>[    1.217673] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.217677] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.217681] usb usb2: Product: UHCI Host Controller
>[    1.217684] usb usb2: Manufacturer: Linux 2.6.43.8-1.fc15.i686.PAE uhci_hcd
>[    1.217687] usb usb2: SerialNumber: 0000:00:10.0
>[    1.217846] hub 2-0:1.0: USB hub found
>[    1.217861] hub 2-0:1.0: 2 ports detected
>[    1.217967] uhci_hcd 0000:00:10.1: UHCI Host Controller
>[    1.218063] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>[    1.218088] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e700
>[    1.218142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.218146] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.218149] usb usb3: Product: UHCI Host Controller
>[    1.218152] usb usb3: Manufacturer: Linux 2.6.43.8-1.fc15.i686.PAE uhci_hcd
>[    1.218156] usb usb3: SerialNumber: 0000:00:10.1
>[    1.218314] hub 3-0:1.0: USB hub found
>[    1.218321] hub 3-0:1.0: 2 ports detected
>[    1.218410] uhci_hcd 0000:00:10.2: UHCI Host Controller
>[    1.218490] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>[    1.218518] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
>[    1.218573] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.218577] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.218581] usb usb4: Product: UHCI Host Controller
>[    1.218584] usb usb4: Manufacturer: Linux 2.6.43.8-1.fc15.i686.PAE uhci_hcd
>[    1.218587] usb usb4: SerialNumber: 0000:00:10.2
>[    1.218728] hub 4-0:1.0: USB hub found
>[    1.218735] hub 4-0:1.0: 2 ports detected
>[    1.218827] uhci_hcd 0000:00:10.3: UHCI Host Controller
>[    1.218903] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>[    1.218927] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e900
>[    1.218985] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.218989] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.218993] usb usb5: Product: UHCI Host Controller
>[    1.218996] usb usb5: Manufacturer: Linux 2.6.43.8-1.fc15.i686.PAE uhci_hcd
>[    1.218999] usb usb5: SerialNumber: 0000:00:10.3
>[    1.219169] hub 5-0:1.0: USB hub found
>[    1.219176] hub 5-0:1.0: 2 ports detected
>[    1.219368] usbcore: registered new interface driver usbserial
>[    1.219384] USB Serial support registered for generic
>[    1.219402] usbcore: registered new interface driver usbserial_generic
>[    1.219405] usbserial: USB Serial Driver core
>[    1.219487] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.220072] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.220084] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.220269] mousedev: PS/2 mouse device common for all mice
>[    1.220653] rtc_cmos 00:05: RTC can wake from S4
>[    1.220846] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.220905] rtc0: alarms up to one year, y3k, 242 bytes nvram
>[    1.221045] device-mapper: uevent: version 1.0.3
>[    1.221170] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>[    1.221250] cpuidle: using governor ladder
>[    1.221254] cpuidle: using governor menu
>[    1.221590] EFI Variables Facility v0.08 2004-May-17
>[    1.221837] usbcore: registered new interface driver usbhid
>[    1.221840] usbhid: USB HID core driver
>[    1.221962] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.222037] TCP cubic registered
>[    1.222041] Initializing XFRM netlink socket
>[    1.222236] NET: Registered protocol family 10
>[    1.222524] Mobile IPv6
>[    1.222529] NET: Registered protocol family 17
>[    1.222556] Registering the dns_resolver key type
>[    1.222598] Using IPI No-Shortcut mode
>[    1.222810] PM: Hibernation image not present or could not be loaded.
>[    1.222847] registered taskstats version 1
>[    1.223358]   Magic number: 0:701:873
>[    1.223549] rtc_cmos 00:05: setting system clock to 2012-06-23 06:51:47 UTC (1340434307)
>[    1.223612] Initializing network drop monitor service
>[    1.223738] Freeing unused kernel memory: 644k freed
>[    1.224970] Write protecting the kernel text: 5584k
>[    1.225079] Write protecting the kernel read-only data: 2160k
>[    1.247731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.299095] dracut: dracut-009-12.fc15
>[    1.317945] dracut: rd.luks=0: removing cryptoluks activation
>[    1.340968] udev[96]: starting version 167
>[    1.494926] dracut: Starting plymouth daemon
>[    1.519060] usb 1-6: new high-speed USB device number 2 using ehci_hcd
>[    1.528465] dracut: rd.dm=0: removing DM RAID activation
>[    1.539001] dracut: rd.md=0: removing MD RAID activation
>[    1.642732] pata_via 0000:00:0f.0: version 0.3.4
>[    1.642925] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
>[    1.643001] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>[    1.646109] usb 1-6: New USB device found, idVendor=07cc, idProduct=0500
>[    1.646117] usb 1-6: New USB device strings: Mfr=3, Product=4, SerialNumber=5
>[    1.646122] usb 1-6: Product: CardReader
>[    1.646125] usb 1-6: Manufacturer: USB2.0
>[    1.646128] usb 1-6: SerialNumber: 1234638 
>[    1.684588] scsi0 : pata_via
>[    1.690079] scsi1 : pata_via
>[    1.714439] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe500 irq 14
>[    1.714448] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe508 irq 15
>[    1.716719] pata_it821x: controller in pass through mode.
>[    1.716811] pata_it821x 0000:00:07.0: setting latency timer to 64
>[    1.721057] scsi2 : pata_it821x
>[    1.724092] scsi3 : pata_it821x
>[    1.724255] ata3: PATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 18
>[    1.724260] ata4: PATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 18
>[    1.752070] Refined TSC clocksource calibration: 1833.125 MHz.
>[    1.752083] Switching to clocksource tsc
>[    1.868673] ata1.00: ATA-7: Maxtor 4R080L0, RAMC1TU0, max UDMA/133
>[    1.868681] ata1.00: 160086528 sectors, multi 16: LBA 
>[    1.874462] ata1.00: configured for UDMA/133
>[    1.874731] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 4R080L0   RAMC PQ: 0 ANSI: 5
>[    1.875161] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.875483] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
>[    1.875566] sd 0:0:0:0: [sda] Write Protect is off
>[    1.875571] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.875607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.883093] ata3.00: ATA-7: Maxtor 6B160P0, BAH41BM0, max UDMA/133
>[    1.883101] ata3.00: 320173056 sectors, multi 0: LBA48 
>[    1.890888] ata3.00: configured for UDMA/133
>[    1.934196] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>[    1.960190]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>[    1.961451] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.975391] Initializing USB Mass Storage driver...
>[    1.975632] scsi4 : usb-storage 1-6:1.0
>[    1.976359] usbcore: registered new interface driver usb-storage
>[    1.976366] USB Mass Storage support registered.
>[    2.045426] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552A, BA52, max UDMA/44
>[    2.067275] ata2.00: configured for UDMA/44
>[    2.071796] scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H552A BA52 PQ: 0 ANSI: 5
>[    2.075752] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>[    2.075759] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.076052] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    2.076820] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    2.077218] scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6B160P0   BAH4 PQ: 0 ANSI: 5
>[    2.077480] sd 2:0:0:0: Attached scsi generic sg2 type 0
>[    2.077642] sd 2:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB)
>[    2.077723] sd 2:0:0:0: [sdb] Write Protect is off
>[    2.077728] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.077763] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.097251]  sdb: sdb1 sdb2 sdb3 sdb4
>[    2.097972] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    2.980318] scsi 4:0:0:0: Direct-Access     USB2.0   CF  CardReader   9144 PQ: 0 ANSI: 0
>[    2.983902] scsi 4:0:0:1: Direct-Access     USB2.0   SM  CardReader   9144 PQ: 0 ANSI: 0
>[    2.987524] scsi 4:0:0:2: Direct-Access     USB2.0   SD  CardReader   9144 PQ: 0 ANSI: 0
>[    2.991149] scsi 4:0:0:3: Direct-Access     USB2.0   MS  CardReader   9144 PQ: 0 ANSI: 0
>[    2.992631] sd 4:0:0:0: Attached scsi generic sg3 type 0
>[    2.993311] sd 4:0:0:1: Attached scsi generic sg4 type 0
>[    2.996776] sd 4:0:0:2: Attached scsi generic sg5 type 0
>[    2.997764] sd 4:0:0:3: Attached scsi generic sg6 type 0
>[    3.000778] sd 4:0:0:0: [sdc] Attached SCSI removable disk
>[    3.003904] sd 4:0:0:1: [sdd] Attached SCSI removable disk
>[    3.005773] sd 4:0:0:2: [sde] Attached SCSI removable disk
>[    3.006764] sd 4:0:0:3: [sdf] Attached SCSI removable disk
>[    7.126023] ata4: link is slow to respond, please be patient (ready=0)
>[   12.125020] ata4: device not ready (errno=-16), forcing hardreset
>[   12.291142] ata4.00: ATA-8: WDC WD3200AAJB-00J3A0, 01.03E01, max UDMA/133
>[   12.291148] ata4.00: 625142448 sectors, multi 0: LBA48 
>[   12.297435] ata4.00: configured for UDMA/133
>[   12.297685] scsi 3:0:0:0: Direct-Access     ATA      WDC WD3200AAJB-0 01.0 PQ: 0 ANSI: 5
>[   12.298362] sd 3:0:0:0: [sdg] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[   12.298444] sd 3:0:0:0: [sdg] Write Protect is off
>[   12.298450] sd 3:0:0:0: [sdg] Mode Sense: 00 3a 00 00
>[   12.298484] sd 3:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   12.299539] sd 3:0:0:0: Attached scsi generic sg7 type 0
>[   12.311180]  sdg: sdg1 sdg2 sdg3 sdg4
>[   12.312127] sd 3:0:0:0: [sdg] Attached SCSI disk
>[   13.560803] dracut: Scanning devices sdb2 sdb3 sdg2  for LVM logical volumes f15/f15_swap vg_f11/f11swap
>[   13.919989] dracut: inactive '/dev/f15/f15_var_log' [4.00 GiB] inherit
>[   13.920124] dracut: inactive '/dev/f15/f15_opt' [2.00 GiB] inherit
>[   13.920198] dracut: inactive '/dev/f15/f15_var' [4.00 GiB] inherit
>[   13.920271] dracut: inactive '/dev/f15/f15_usr' [8.00 GiB] inherit
>[   13.920344] dracut: inactive '/dev/f15/f15_var_ftp' [4.00 GiB] inherit
>[   13.920419] dracut: inactive '/dev/f15/f15_usr_local' [2.00 GiB] inherit
>[   13.920492] dracut: inactive '/dev/f15/f15_var_tmp' [6.00 GiB] inherit
>[   13.920568] dracut: inactive '/dev/f15/f15_usr_share' [20.00 GiB] inherit
>[   13.920642] dracut: inactive '/dev/f15/f15_var_cache' [6.00 GiB] inherit
>[   13.920716] dracut: inactive '/dev/f15/f15_usr_lib' [8.00 GiB] inherit
>[   13.920788] dracut: inactive '/dev/f15/f15_var_www' [4.00 GiB] inherit
>[   13.920859] dracut: inactive '/dev/f15/f15_tmp' [6.00 GiB] inherit
>[   13.920930] dracut: inactive '/dev/f15/f15_swap' [2.00 GiB] inherit
>[   13.921016] dracut: inactive '/dev/vg_f11/f11usrlocal' [2.00 GiB] inherit
>[   13.921093] dracut: inactive '/dev/vg_f11/f11home' [24.26 GiB] inherit
>[   13.921167] dracut: inactive '/dev/vg_f11/f11var' [15.08 GiB] inherit
>[   13.921241] dracut: inactive '/dev/vg_f11/f11swap' [1.50 GiB] inherit
>[   13.921315] dracut: inactive '/dev/vg_f11/f11varftp' [2.00 GiB] inherit
>[   13.921389] dracut: inactive '/dev/vg_f11/f11varlog' [3.00 GiB] inherit
>[   13.921463] dracut: inactive '/dev/vg_f11/f11vartmp' [2.00 GiB] inherit
>[   13.921536] dracut: inactive '/dev/vg_f11/f11usr' [30.25 GiB] inherit
>[   13.921611] dracut: inactive '/dev/vg_f11/f11varwww' [2.00 GiB] inherit
>[   13.921685] dracut: inactive '/dev/vg_f11/f11tmp' [3.00 GiB] inherit
>[   14.529183] kjournald starting.  Commit interval 5 seconds
>[   14.529228] EXT3-fs (sdb1): mounted filesystem with ordered data mode
>[   14.594716] dracut: Checking filesystems
>[   14.594756] dracut: fsck -T -t noopts=_netdev -A -a
>[   14.730875] dracut: /121: clean, 16295/258048 files, 191157/1032168 blocks
>[   14.731161] dracut: Remounting /dev/disk/by-uuid/6f56e069-9379-4552-91d9-e30920bbd173 with -o ro,
>[   14.795472] kjournald starting.  Commit interval 5 seconds
>[   14.795520] EXT3-fs (sdb1): mounted filesystem with ordered data mode
>[   14.819578] dracut: Mounted root filesystem /dev/sdb1
>[   14.955713] dracut: Switching root
>[   15.414310] SELinux:  Disabled at runtime.
>[   15.414341] SELinux:  Unregistering netfilter hooks
>[   15.414422] type=1404 audit(1340434321.689:2): selinux=0 auid=4294967295 ses=4294967295
>[   15.446489] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
>[   15.458444] systemd[1]: Set hostname to <fed.reiisi.homedns.org>.
>[   15.500524] systemd[1]: /usr appears to be on a different file system than /. This is not supported anymore. Some things will probably break (sometimes even silently) in mysterious ways. Consult http://freedesktop.org/wiki/Software/systemd/separate-usr-is-broken for more information.
>[   16.583263] udevd[464]: BUS= will be removed in a future udev version, please use SUBSYSTEM= to match the event device, or SUBSYSTEMS= to match a parent device, in /etc/udev/rules.d/10-usrp.rules:3
>[   16.583368] udevd[464]: SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in /etc/udev/rules.d/10-usrp.rules:3
>[   17.202565] EXT3-fs (sdb1): using internal journal
>[   17.564503] udev[464]: starting version 167
>[   17.935450] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>[   17.935458] via_rhine: Broken BIOS detected, avoid_D3 enabled
>[   17.935771] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
>[   17.936235] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0xee020000, 00:11:09:b4:08:41, IRQ 23
>[   17.937022] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1
>[   18.105695] parport_pc 00:0b: reported by Plug and Play ACPI
>[   18.105830] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>[   18.262519] microcode: AMD CPU family 0x6 not supported
>[   18.438096] microcode: AMD CPU family 0x6 not supported
>[   18.770071] ppdev: user-space parallel port driver
>[   18.919162] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>[   18.919617] snd_via82xx 0000:00:11.5: setting latency timer to 64
>[   19.162566] Adding 1572860k swap on /dev/mapper/vg_f11-f11swap.  Priority:0 extents:1 across:1572860k 
>[   19.736872] systemd-fsck[720]: /dev/sdg3: clean, 203329/5242880 files, 3863895/20971520 blocks
>[   19.837597] systemd-fsck[711]: /dev/sdg4: clean, 217763/7479296 files, 12722875/29907968 blocks (check after next mount)
>[   19.906706] EXT4-fs (sdg3): mounted filesystem with ordered data mode. Opts: (null)
>[   20.044841] systemd-fsck[717]: /dev/sdb4: clean, 80805/7307264 files, 12956129/14591036 blocks
>[   20.134545] EXT4-fs (sdg4): mounted filesystem with ordered data mode. Opts: (null)
>[   20.214299] kjournald starting.  Commit interval 5 seconds
>[   20.214643] EXT3-fs (sdb4): using internal journal
>[   20.214649] EXT3-fs (sdb4): mounted filesystem with ordered data mode
>[   23.071271] systemd-fsck[882]: /dev/mapper/vg_f11-f11usrlocal: clean, 46/131072 files, 27573/524288 blocks
>[   23.126171] systemd-fsck[897]: /dev/mapper/vg_f11-f11home: clean, 78955/1597440 files, 4574981/6359040 blocks
>[   23.357960] systemd-fsck[915]: /dev/mapper/vg_f11-f11varftp: clean, 12/131072 files, 25389/524288 blocks
>[   23.538354] systemd-fsck[923]: /dev/mapper/vg_f11-f11vartmp: clean, 148/131072 files, 47147/524288 blocks
>[   23.751564] systemd-fsck[931]: /dev/mapper/vg_f11-f11varlog: clean, 186/196608 files, 49533/786432 blocks
>[   23.832924] systemd-fsck[927]: /dev/mapper/vg_f11-f11var: clean, 62802/991232 files, 2360258/3952640 blocks
>[   24.047685] systemd-fsck[953]: /dev/mapper/vg_f11-f11varwww: clean, 680/131072 files, 27347/524288 blocks
>[   24.082123] systemd-fsck[949]: /dev/mapper/vg_f11-f11usr: clean, 618272/1982464 files, 3829673/7929856 blocks
>[   24.121316] systemd-fsck[961]: /dev/mapper/vg_f11-f11tmp: clean, 877/196608 files, 86507/786432 blocks
>[   24.872909] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: (null)
>[   25.290432] EXT4-fs (dm-22): mounted filesystem with ordered data mode. Opts: (null)
>[   25.366681] EXT4-fs (dm-20): mounted filesystem with ordered data mode. Opts: (null)
>[   25.378900] EXT4-fs (dm-16): mounted filesystem with ordered data mode. Opts: (null)
>[   26.038611] EXT4-fs (dm-19): mounted filesystem with ordered data mode. Opts: (null)
>[   26.075278] EXT4-fs (dm-17): mounted filesystem with ordered data mode. Opts: (null)
>[   26.164418] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
>[   26.290213] EXT4-fs (dm-21): mounted filesystem with ordered data mode. Opts: (null)
>[   26.434407] EXT4-fs (dm-18): mounted filesystem with ordered data mode. Opts: (null)
>[   29.027789] /usr/sbin/gpm[1109]: *** info [daemon/startup.c(136)]:
>[   29.027868] /usr/sbin/gpm[1109]: Started gpm successfully. Entered daemon mode.
>[   30.487724] ntpd[1092]: ntpd 4.2.6p3@1.2290-o Fri May  6 16:27:05 UTC 2011 (1)
>[   30.525792] ntpd[1092]: proto: precision = 0.330 usec
>[   30.526034] ntpd[1092]: 0.0.0.0 c01d 0d kern kernel time sync enabled
>[   30.624685] ntpd[1092]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
>[   30.624821] ntpd[1092]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
>[   30.877994] ntpd[1092]: Listen and drop on 1 v6wildcard :: UDP 123
>[   30.878052] ntpd[1092]: Listen normally on 2 lo 127.0.0.1 UDP 123
>[   30.878063] ntpd[1092]: Listen normally on 3 lo ::1 UDP 123
>[   30.878072] ntpd[1092]: peers refreshed
>[   30.878081] ntpd[1092]: Listening on routing socket on fd #20 for interface updates
>[   30.963213] smartd[1099]: smartd 5.42 2011-10-20 r3458 [i686-linux-2.6.43.8-1.fc15.i686.PAE] (local build)
>[   30.963288] smartd[1099]: Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>[   30.963529] smartd[1099]: Opened configuration file /etc/smartd.conf
>[   30.993946] smartd[1099]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
>[   31.009576] smartd[1099]: Device: /dev/sda, type changed from 'scsi' to 'sat'
>[   31.009750] smartd[1099]: Device: /dev/sda [SAT], opened
>[   31.010823] smartd[1099]: Device: /dev/sda [SAT], Maxtor 4R080L0, S/N:R2T745PE, FW:RAMC1TU0, 81.9 GB
>[   31.016257] smartd[1099]: Device: /dev/sda [SAT], found in smartd database: Maxtor DiamondMax 16
>[   31.159113] smartd[1099]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
>[   31.317590] smartd[1099]: Device: /dev/sdb, type changed from 'scsi' to 'sat'
>[   31.317762] smartd[1099]: Device: /dev/sdb [SAT], opened
>[   31.397092] smartd[1099]: Device: /dev/sdb [SAT], Maxtor 6B160P0, S/N:B41H5J7H, FW:BAH41BM0, 163 GB
>[   31.402602] smartd[1099]: Device: /dev/sdb [SAT], found in smartd database: Maxtor DiamondMax 10 (ATA/133 and SATA/150)
>[   32.137702] smartd[1099]: Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list.
>[   32.139166] smartd[1099]: Device: /dev/sdg, type changed from 'scsi' to 'sat'
>[   32.139341] smartd[1099]: Device: /dev/sdg [SAT], opened
>[   32.140409] smartd[1099]: Device: /dev/sdg [SAT], WDC WD3200AAJB-00J3A0, S/N:WD-WCAV2Z842365, WWN:5-0014ee-103dad116, FW:01.03E01, 320 GB
>[   32.151621] smartd[1099]: Device: /dev/sdg [SAT], found in smartd database: Western Digital Caviar Blue EIDE
>[   32.265503] ntpd[1092]: Deferring DNS for 0.fedora.pool.ntp.org 1
>[   32.282857] smartd[1099]: Device: /dev/sdg [SAT], is SMART capable. Adding to "monitor" list.
>[   32.283431] smartd[1099]: Monitoring 3 ATA and 0 SCSI devices
>[   32.311272] ntpd[1092]: Deferring DNS for 1.fedora.pool.ntp.org 1
>[   32.311291] ntpd[1092]: Deferring DNS for 2.fedora.pool.ntp.org 1
>[   32.311301] ntpd[1092]: Deferring DNS for 3.fedora.pool.ntp.org 1
>[   32.311563] ntpd[1092]: 0.0.0.0 c016 06 restart
>[   32.311719] ntpd[1092]: 0.0.0.0 c012 02 freq_set kernel 22.298 PPM
>[   32.407330] avahi-daemon[1093]: Found user 'avahi' (UID 496) and group 'avahi' (GID 485).
>[   32.407599] avahi-daemon[1093]: Successfully dropped root privileges.
>[   32.462107] avahi-daemon[1093]: avahi-daemon 0.6.30 starting up.
>[   32.966711] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   32.981782] nf_conntrack version 0.5.0 (10986 buckets, 43944 max)
>[   34.038536] NetworkManager[1100]: <info> NetworkManager (version 0.9.1.90-3.git20110927.fc15) is starting...
>[   34.038618] NetworkManager[1100]: <info> Read config file /etc/NetworkManager/NetworkManager.conf
>[   34.314565] ntpd_intres[1138]: host name not found: 0.fedora.pool.ntp.org
>[   34.314583] ntpd_intres[1138]: host name not found: 1.fedora.pool.ntp.org
>[   34.314593] ntpd_intres[1138]: host name not found: 2.fedora.pool.ntp.org
>[   34.314602] ntpd_intres[1138]: host name not found: 3.fedora.pool.ntp.org
>[   34.784627] abrtd[1075]: Init complete, entering main loop
>[   34.794180] avahi-daemon[1093]: Successfully called chroot().
>[   34.794198] avahi-daemon[1093]: Successfully dropped remaining capabilities.
>[   37.649066] Bluetooth: Core ver 2.16
>[   37.649135] NET: Registered protocol family 31
>[   37.649138] Bluetooth: HCI device and connection manager initialized
>[   37.649803] Bluetooth: HCI socket layer initialized
>[   37.649810] Bluetooth: L2CAP socket layer initialized
>[   37.649823] Bluetooth: SCO socket layer initialized
>[   37.719406] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   37.719415] Bluetooth: BNEP filters: protocol multicast
>[   42.743902] RPC: Registered named UNIX socket transport module.
>[   42.743910] RPC: Registered udp transport module.
>[   42.743913] RPC: Registered tcp transport module.
>[   42.743915] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   44.130188] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   45.425524] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>[   45.447144] NFSD: starting 90-second grace period
>[   47.338013] eth0: no IPv6 routers present
>[   55.284085] Bridge firewalling registered
>[   56.314751] ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[   56.814823] Ebtables v2.0 registered
>[   56.885330] [drm] Initialized drm 1.1.0 20060810
>[   56.898719] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[   56.898725] [drm] No driver support for vblank timestamp query.
>[   56.898731] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
>[   56.981049] agpgart-via 0000:00:00.0: AGP 3.5 bridge
>[   56.981079] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
>[   56.981087] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
>[   56.981142] pci 0000:01:00.0: putting AGP V2 device into 4x mode
>[ 2999.731503] fuse init (API version 7.18)

Actions: View

Attachments on bug 834733: 593843 | 593867