Attachment 597005 Details for Bug 838443 – smartctl -a output for the drive that udisksd is having issues with

smartctl -a output for the drive that udisksd is having issues with

smartctl_successful_output.txt (text/plain), 4.49 KB, created by Stan King on 2012-07-09 06:37:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stan King

Created: 2012-07-09 06:37:53 UTC

Size: 4.49 KB

patch

obsolete

>smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.4-5.fc17.x86_64] (local build)
>Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
>=== START OF INFORMATION SECTION ===
>Model Family:     Western Digital Caviar SE
>Device Model:     WDC WD1600JB-00GVA0
>Serial Number:    WD-WCAL92984008
>Firmware Version: 08.02D08
>User Capacity:    160,041,885,696 bytes [160 GB]
>Sector Size:      512 bytes logical/physical
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   6
>ATA Standard is:  Exact ATA specification draft version not indicated
>Local Time is:    Sun Jul  8 23:21:51 2012 PDT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		( 4629) seconds.
>Offline data collection
>capabilities: 			 (0x7b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					No General Purpose Logging support.
>Short self-test routine 
>recommended polling time: 	 (   2) minutes.
>Extended self-test routine
>recommended polling time: 	 (  62) minutes.
>Conveyance self-test routine
>recommended polling time: 	 (   5) minutes.
>SCT capabilities: 	       (0x003f)	SCT Status supported.
>					SCT Error Recovery Control supported.
>					SCT Feature Control supported.
>					SCT Data Table supported.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000b   200   200   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0007   170   166   021    Pre-fail  Always       -       4008
>  4 Start_Stop_Count        0x0032   100   100   040    Old_age   Always       -       402
>  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000b   200   200   051    Pre-fail  Always       -       0
>  9 Power_On_Hours          0x0032   069   069   000    Old_age   Always       -       22788
> 10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
> 11 Calibration_Retry_Count 0x0013   100   100   051    Pre-fail  Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       398
>194 Temperature_Celsius     0x0022   101   095   000    Old_age   Always       -       49
>196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0012   200   200   000    Old_age   Always       -       0
>199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       65707
>200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
># 1  Conveyance offline  Completed without error       00%     20469         -
># 2  Extended offline    Completed without error       00%     20469         -
># 3  Short offline       Completed without error       00%     20469         -
>
>SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 838443: 597003 | 597005