Attachment 606044 Details for Bug 849223 – rhel58 x64 xen dom0 linux kernel dmesg log

rhel58 x64 xen dom0 linux kernel dmesg log

rhel58-x64-xen-dom0-linux-dmesg-log.txt (text/plain), 30.86 KB, created by Pasi Karkkainen on 2012-08-21 20:47:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pasi Karkkainen

Created: 2012-08-21 20:47:23 UTC

Size: 30.86 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/LogVol00 pci_pt_e820_access=on ignore_loglevel)
>Linux version 2.6.18-308.11.1.el5xen (mockbuild@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Fri Jun 15 16:19:17 EDT 2012
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000080800000 (usable)
>On node 0 totalpages: 517367
>  DMA zone: 2267 pages, LIFO batch:0
>  DMA32 zone: 515100 pages, LIFO batch:31
>DMI 2.6 present.
>DMI: Dell Inc. PowerEdge R510/0DPRKF, BIOS 1.10.2 04/27/2012
>ACPI: RSDP (v002 DELL                                  ) @ 0x00000000000f1530
>ACPI: XSDT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000000f1634
>ACPI: FADT (v003 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3f9c
>ACPI: MADT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3478
>ACPI: SPCR (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b35d8
>ACPI: HPET (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b362c
>ACPI:  (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3668
>  >>> ERROR: Invalid checksum
>ACPI: MCFG (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b38c4
>ACPI: WD__ (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3904
>ACPI: SLIC (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3a3c
>ACPI: ERST (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf392ce4
>ACPI: HEST (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf392f54
>ACPI: BERT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf392b44
>ACPI: EINJ (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf392b74
>ACPI: SRAT (v001 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3bc0
>ACPI: TCPA (v002 DELL   PE_SC3   0x00000001 DELL 0x00000001) @ 0x00000000cf3b3f34
>ACPI: SSDT (v001  INTEL PPM RCM  0x80000001 INTL 0x20061109) @ 0x00000000cf3b7000
>ACPI: DSDT (v001 DELL   PE_SC3   0x00000001 INTL 0x20050624) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x22] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x24] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x30] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x34] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x21] enabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x23] enabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x25] enabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x31] enabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x33] enabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x35] enabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x18] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
>Processor #255 invalid (max 255)
>ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
>IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>Built 1 zonelists.  Total pages: 517367
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 pci_pt_e820_access=on ignore_loglevel
>debug: ignoring loglevel setting.
>pci_pt_e820_access: enabled
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2266.746 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0xffff880003a00000 - 0xffff880007a00000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 1973712k/2105344k available (2546k kernel code, 123068k reserved, 1761k data, 196k init)
>Calibrating delay using timer specific routine.. 5668.38 BogoMIPS (lpj=11336761)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 256K
>CPU: L3 cache: 12288K
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Initializing CPU#3
>Initializing CPU#4
>Initializing CPU#5
>Initializing CPU#6
>Initializing CPU#7
>Initializing CPU#8
>Initializing CPU#9
>Initializing CPU#10
>Brought up 12 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=248 bytes
>Initializing CPU#11
>migration_cost=48
>checking if image is initramfs... it is
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using acpi max pci bus value of 0x100 
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
>ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
>ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
>ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x800-0x87f could not be reserved
>pnp: 00:07: ioport range 0x880-0x8ff has been reserved
>pnp: 00:07: ioport range 0x900-0x91f has been reserved
>pnp: 00:07: ioport range 0x920-0x923 has been reserved
>pnp: 00:07: ioport range 0x924-0x924 has been reserved
>pnp: 00:07: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:07: ioport range 0xca0-0xca7 has been reserved
>pnp: 00:08: ioport range 0xca8-0xca8 has been reserved
>pnp: 00:08: ioport range 0xcac-0xcac has been reserved
>pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0b: iomem range 0xfed90000-0xfed91fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: da000000-ddffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: f000-ffff
>  MEM window: de100000-de1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: e000-efff
>  MEM window: de200000-de7fffff
>  PREFETCH window 0x00000000d1000000-0x00000000d10fffff
>PCI: Bridge: 0000:00:09.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: de800000-df7fffff
>  PREFETCH window 0x00000000d9800000-0x00000000d9ffffff
>GSI 16 sharing vector 0x98 and IRQ 16
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 53 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 53 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 53 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 53 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 53 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>type=2000 audit(1345593415.461:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>alg: No test for crc32c (crc32c-generic)
>ksign: Installing public key data
>Loading keyring
>- Added public key 895399908D388CC6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:08:03.0
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>brd: module loaded
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Initalizing network drop monitor service
>Write protecting the kernel read-only data: 504k
>GSI 17 sharing vector 0xC8 and IRQ 17
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 17, io mem 0xde0fe000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>GSI 18 sharing vector 0xD0 and IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xde0ff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>USB Universal Host Controller Interface driver v3.0
>GSI 19 sharing vector 0xD8 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 17 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000dc40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 20 sharing vector 0x21 and IRQ 20
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000dc60
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000dc80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 1-3: configuration #1 chosen from 1 choice
>hub 1-3:1.0: USB hub found
>hub 1-3:1.0: 4 ports detected
>GSI 21 sharing vector 0x29 and IRQ 21
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000dca0
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dcc0
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000dce0
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>SCSI subsystem initialized
>megasas: 00.00.05.40-rh2 Thu. Aug. 4 17:00:00 PDT 2011
>megasas: 0x1000:0x0079:0x1028:0x1f17: bus 2:slot 0:func 0
>GSI 22 sharing vector 0x31 and IRQ 22
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 32 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>megasas: FW now in Ready state
>megasas: INIT adapter done 
>megasas: max_sectors : 0x100, cmd_per_lun : 0x80
>scsi0 : LSI SAS based MegaRAID driver
>  Vendor: ATA       Model: ST31000524NS      Rev: KA05
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  Vendor: ATA       Model: ST31000524NS      Rev: KA05
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  Vendor: ATA       Model: ST31000524NS      Rev: KA05
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>usb 2-3: new high speed USB device using ehci_hcd and address 3
>  Vendor: ATA       Model: ST31000524NS      Rev: KA05
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  Vendor: SEAGATE   Model: ST33000650SS      Rev: RS0D
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>  Vendor: SEAGATE   Model: ST33000650SS      Rev: RS0D
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>  Vendor: SEAGATE   Model: ST33000650SS      Rev: RS0D
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>  Vendor: SEAGATE   Model: ST33000650SS      Rev: RS0D
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>usb 2-3: configuration #1 chosen from 1 choice
>  Vendor: DP        Model: BACKPLANE         Rev: 1.10
>  Type:   Enclosure                          ANSI SCSI revision: 05
>  Vendor: DELL      Model: PERC H700         Rev: 2.10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 3904897024 512-byte hdwr sectors (1999307 MB)
>sda: Write Protect is off
>sda: Mode Sense: 1f 00 00 08
>SCSI device sda: drive cache: write back
>SCSI device sda: 3904897024 512-byte hdwr sectors (1999307 MB)
>sda: Write Protect is off
>sda: Mode Sense: 1f 00 00 08
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:2:0:0: Attached scsi disk sda
>  Vendor: DELL      Model: PERC H700         Rev: 2.10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 11718885376 512-byte hdwr sectors (6000069 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 1f 00 00 08
>SCSI device sdb: drive cache: write back
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 11718885376 512-byte hdwr sectors (6000069 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 1f 00 00 08
>SCSI device sdb: drive cache: write back
> sdb: unknown partition table
>sd 0:2:1:0: Attached scsi disk sdb
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>libata version 3.00 loaded.
>ata_piix 0000:00:1f.2: version 2.12
>GSI 23 sharing vector 0x41 and IRQ 23
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 23
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi1 : ata_piix
>scsi2 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xd8e0 ctl 0xd8d0 bmdma 0xdc00 irq 23
>ata2: SATA max UDMA/133 cmd 0xd8e8 ctl 0xd8d4 bmdma 0xdc08 irq 23
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>input: Avocent USB Composite Device-0 as /class/input/input0
>input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2
>input: Avocent USB Composite Device-0 as /class/input/input1
>input,hidraw0: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2
>ata1: SATA link down (SStatus 0 SControl 0)
>ata2: SATA link down (SStatus 0 SControl 0)
>GSI 24 sharing vector 0x49 and IRQ 24
>ACPI: PCI Interrupt 0000:00:1f.5[D] -> GSI 22 (level, low) -> IRQ 24
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xd8f0 ctl 0xd8d8 bmdma 0xdc20 irq 24
>ata4: SATA max UDMA/133 cmd 0xd8f8 ctl 0xd8dc bmdma 0xdc28 irq 24
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
>ata3.00: configured for UDMA/100
>ata4: SATA link down (SStatus 4 SControl 0)
>  Vendor: TEAC      Model: DVD-ROM DV-28SW   Rev: R.2A
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Initializing USB Mass Storage driver...
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: iDRAC     Model: LCDRIVE           Rev: 0323
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  Vendor: iDRAC     Model: Virtual CD        Rev: 0323
>  Type:   CD-ROM                             ANSI SCSI revision: 00
>  Vendor: iDRAC     Model: Virtual Floppy    Rev: 0323
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 5:0:0:0: Attached scsi removable disk sdc
>usb-storage: device scan complete
>sd 6:0:0:1: Attached scsi removable disk sdd
>usb-storage: device scan complete
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
>device-mapper: dm-raid45: initialized v0.2594l
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1345593448.451:2): selinux=0 auid=4294967295 ses=4294967295
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>dca service started, version 1.8
>bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011)
>GSI 25 sharing vector 0x51 and IRQ 25
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 36 (level, low) -> IRQ 25
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>eth0: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem da000000, IRQ 25, node addr 842b2b51946e
>GSI 26 sharing vector 0x59 and IRQ 26
>ACPI: PCI Interrupt 0000:01:00.1[B] -> GSI 48 (level, low) -> IRQ 26
>PCI: Setting latency timer of device 0000:01:00.1 to 64
>eth1: Broadcom NetXtreme II BCM5716 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 26, node addr 842b2b51946f
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.4.8-k
>ixgbe: Copyright (c) 1999-2011 Intel Corporation.
>GSI 27 sharing vector 0x61 and IRQ 27
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 38 (level, low) -> IRQ 27
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>input: PC Speaker as /class/input/input2
>scsi 0:0:32:0: Attached scsi generic sg0 type 13
>sd 0:2:0:0: Attached scsi generic sg1 type 0
>sd 0:2:1:0: Attached scsi generic sg2 type 0
>scsi 3:0:0:0: Attached scsi generic sg3 type 5
>scsi 6:0:0:0: Attached scsi generic sg4 type 5
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>sd 6:0:0:1: Attached scsi generic sg6 type 0
>ixgbe 0000:03:00.0: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1
>ixgbe 0000:03:00.0: (PCI Express:5.0GT/s:Width x8) 00:2b:31:77:9e:1c
>ixgbe 0000:03:00.0: MAC: 2, PHY: 8, SFP+: 3, PBA No: E81283-002
>ixgbe 0000:03:00.0: eth2: IOV is enabled with 8 VFs
>ixgbe 0000:03:00.0: eth2: IOV: VF 0 is enabled MAC 26:ba:ed:83:0f:21
>ixgbe 0000:03:00.0: eth2: IOV: VF 1 is enabled MAC 82:c5:d4:bd:03:a8
>ixgbe 0000:03:00.0: eth2: IOV: VF 2 is enabled MAC f6:12:f5:40:1b:3c
>ixgbe 0000:03:00.0: eth2: IOV: VF 3 is enabled MAC 06:2a:f0:f1:83:d2
>ixgbe 0000:03:00.0: eth2: IOV: VF 4 is enabled MAC a6:42:8e:04:aa:d4
>ixgbe 0000:03:00.0: eth2: IOV: VF 5 is enabled MAC 46:3f:7d:dc:1c:c2
>ixgbe 0000:03:00.0: eth2: IOV: VF 6 is enabled MAC 1a:05:21:85:b8:bf
>ixgbe 0000:03:00.0: eth2: IOV: VF 7 is enabled MAC 72:68:90:c3:b3:7b
>ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection
>GSI 28 sharing vector 0x81 and IRQ 28
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 45 (level, low) -> IRQ 28
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>sr1: scsi3-mmc drive: 0x/0x cd/rw caddy
>sr 6:0:0:0: Attached scsi CD-ROM sr1
>ixgbe 0000:03:00.1: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1
>ixgbe 0000:03:00.1: (PCI Express:5.0GT/s:Width x8) 00:2b:31:77:9e:1d
>ixgbe 0000:03:00.1: MAC: 2, PHY: 8, SFP+: 4, PBA No: E81283-002
>ixgbe 0000:03:00.1: eth3: IOV is enabled with 8 VFs
>ixgbe 0000:03:00.1: eth3: IOV: VF 0 is enabled MAC b2:51:a2:b4:64:a6
>ixgbe 0000:03:00.1: eth3: IOV: VF 1 is enabled MAC 76:4c:30:4f:5c:b4
>ixgbe 0000:03:00.1: eth3: IOV: VF 2 is enabled MAC 82:76:b0:d6:33:05
>ixgbe 0000:03:00.1: eth3: IOV: VF 3 is enabled MAC 72:db:32:f4:69:ef
>ixgbe 0000:03:00.1: eth3: IOV: VF 4 is enabled MAC fe:2d:61:38:41:e7
>ixgbe 0000:03:00.1: eth3: IOV: VF 5 is enabled MAC 4a:77:50:c7:ca:e0
>ixgbe 0000:03:00.1: eth3: IOV: VF 6 is enabled MAC 6a:d3:3c:7f:ea:7f
>ixgbe 0000:03:00.1: eth3: IOV: VF 7 is enabled MAC 0a:ed:d7:1f:9f:e8
>ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection
>floppy0: no floppy controllers found
>work still pending
>lp: driver loaded but no devices found
>pciback 0000:03:10.0: seizing device
>pciback 0000:03:10.2: seizing device
>pciback 0000:03:10.4: seizing device
>pciback 0000:03:10.6: seizing device
>pciback 0000:03:11.0: seizing device
>pciback 0000:03:11.2: seizing device
>pciback 0000:03:11.4: seizing device
>pciback 0000:03:11.6: seizing device
>pciback 0000:03:10.1: seizing device
>pciback 0000:03:10.3: seizing device
>pciback 0000:03:10.5: seizing device
>pciback 0000:03:10.7: seizing device
>pciback 0000:03:11.1: seizing device
>pciback 0000:03:11.3: seizing device
>pciback 0000:03:11.5: seizing device
>pciback 0000:03:11.7: seizing device
>PCI: Enabling device 0000:03:11.7 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.5 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.3 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.1 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.7 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.5 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.3 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.1 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.6 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.4 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.2 (0000 -> 0002)
>PCI: Enabling device 0000:03:11.0 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.6 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.4 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.2 (0000 -> 0002)
>PCI: Enabling device 0000:03:10.0 (0000 -> 0002)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Mapper loaded
>dell-wmi: No known WMI GUID found
>ACPI Exception (evregion-0424): AE_SUPPORT, Returned by Handler for [DataTable] [20060707]
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff880007ae6470), AE_SUPPORT
>ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff880007ae64f0), AE_SUPPORT
>ACPI Exception (power_meter-0759): AE_SUPPORT, Evaluating _PMC [20060707]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.6 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 14352376k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:14352376k
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>Loading iSCSI transport class v2.0-871.
>libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>iscsi: registered transport (cxgb3i)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
>Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Aug 04, 2011)
>iscsi: registered transport (bnx2i)
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>iscsi: registered transport (be2iscsi)
>no owner
>no owner
>no owner
>no owner
>no owner
>no owner
>no owner
>no owner
>no owner
>bnx2 0000:01:00.0: eth2: using MSIX
>ADDRCONF(NETDEV_UP): eth2: link is not ready
>bnx2 0000:01:00.0: eth2: NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
>ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>Ebtables v2.0 registered
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>eth2: no IPv6 routers present
>8021q: adding VLAN 0 to HW filter on device eth0
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ixgbe 0000:03:00.0: eth0: detected SFP+: 3
>ixgbe 0000:03:00.0: eth0: NIC Link is Up 10 Gbps, Flow Control: RX/TX
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>8021q: adding VLAN 0 to HW filter on device eth1
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ixgbe 0000:03:00.1: eth1: detected SFP+: 4
>ixgbe 0000:03:00.1: eth1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>pciback: vpci: 0000:03:10.2: assign to virtual slot 0
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>device tap0 entered promiscuous mode
>virbr0: topology change detected, propagating
>virbr0: port 1(tap0) entering forwarding state
>New device tap0 does not support netpoll
>Disabling netpoll for virbr0
>device vif1.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif1.0: link is not ready
>loop: loaded (max 8 devices)
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>virbr0: port 1(tap0) entering disabled state
>virbr0: port 1(tap0) entering disabled state
>device tap0 left promiscuous mode
>virbr0: port 1(tap0) entering disabled state
>blkback: ring-ref 8, event-channel 4, protocol 1 (x86_64-abi)
>ixgbe 0000:03:00.0: eth0: VF Reset msg received from vf 1
>ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
>virbr0: topology change detected, propagating
>virbr0: port 2(vif1.0) entering forwarding state
>ixgbe 0000:03:00.0: eth0: VF Reset msg received from vf 1
>ixgbe 0000:03:00.0: eth0: VF Reset msg received from vf 1
>virbr0: port 2(vif1.0) entering disabled state
>device vif1.0 left promiscuous mode
>virbr0: port 2(vif1.0) entering disabled state

Actions: View

Attachments on bug 849223: 606043 | 606044 | 606045 | 606046 | 606050 | 606051 | 606365 | 606370 | 606639 | 610520 | 611505 | 613668 | 614372 | 614373 | 614374 | 614596 | 615391 | 615392 | 615482 | 616740 | 617217 | 617218 | 617260 | 617261 | 617528 | 617541 | 617718 | 618009 | 618145 | 618240 | 618241 | 618312