Attachment 614403 Details for Bug 858368 – CCID sudo ./src/parse > output.txt

CCID sudo ./src/parse > output.txt

output.txt (text/plain), 3.00 KB, created by Andrew G. Dunn on 2012-09-19 14:07:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew G. Dunn

Created: 2012-09-19 14:07:35 UTC

Size: 3.00 KB

patch

obsolete

> idVendor: 0x0BDA
>  iManufacturer: Generic
> idProduct: 0x0169
>  iProduct: USB2.0-CRW
> bcdDevice: 61.23 (firmware release?)
> bLength: 9
> bDescriptorType: 4
> bInterfaceNumber: 0
> bAlternateSetting: 0
> bNumEndpoints: 3
>  bulk-IN, bulk-OUT and Interrupt-IN
> bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
> bInterfaceSubClass: 0
> bInterfaceProtocol: 0
>  bulk transfer, optional interrupt-IN (CCID)
> iInterface: Smart Card Reader Interface
> CCID Class Descriptor
>  bLength: 0x36
>  bDescriptorType: 0x21
>  bcdCCID: 1.10
>  bMaxSlotIndex: 0x00
>  bVoltageSupport: 0x07
>   5.0V
>   3.0V
>   1.8V
>  dwProtocols: 0x0000 0x0003
>   T=0
>   T=1
>  dwDefaultClock: 3.750 MHz
>  dwMaximumClock: 7.500 MHz
>  bNumClockSupported: 0 (will use whatever is returned)
>   IFD does not support GET CLOCK FREQUENCIES request: Success
>  dwDataRate: 10080 bps
>  dwMaxDataRate: 312500 bps
>  bNumDataRatesSupported: 0 (will use whatever is returned)
>   IFD does not support GET_DATA_RATES request: Success
>  dwMaxIFSD: 254
>  dwSynchProtocols: 0x00000000
>  dwMechanical: 0x00000000
>   No special characteristics
>  dwFeatures: 0x00010030
>   ....10 Automatic ICC clock frequency change according to parameters
>   ....20 Automatic baud rate change according to frequency and Fi, Di params
>   01.... TPDU level exchange
>  dwMaxCCIDMessageLength: 271 bytes
>  bClassGetResponse: 0x00
>  bClassEnveloppe: 0x00
>  wLcdLayout: 0x0000
>  bPINSupport: 0x00
>  bMaxCCIDBusySlots: 1
> idVendor: 0x0A5C
>  iManufacturer: Broadcom Corp
> idProduct: 0x5802
>  iProduct: 5880
> bcdDevice: 1.01 (firmware release?)
> bLength: 9
> bDescriptorType: 4
> bInterfaceNumber: 1
> bAlternateSetting: 0
> bNumEndpoints: 3
>  bulk-IN, bulk-OUT and Interrupt-IN
> bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
> bInterfaceSubClass: 0
> bInterfaceProtocol: 0
>  bulk transfer, optional interrupt-IN (CCID)
> iInterface: Contacted SmartCard
> CCID Class Descriptor
>  bLength: 0x36
>  bDescriptorType: 0x21
>  bcdCCID: 1.00
>  bMaxSlotIndex: 0x00
>  bVoltageSupport: 0x07
>   5.0V
>   3.0V
>   1.8V
>  dwProtocols: 0x0000 0x0003
>   T=0
>   T=1
>  dwDefaultClock: 4.000 MHz
>  dwMaximumClock: 4.000 MHz
>  bNumClockSupported: 0 (will use whatever is returned)
>   IFD does not support GET CLOCK FREQUENCIES request: Success
>  dwDataRate: 9600 bps
>  dwMaxDataRate: 250000 bps
>  bNumDataRatesSupported: 0 (will use whatever is returned)
>   IFD does not support GET_DATA_RATES request: Success
>  dwMaxIFSD: 247
>  dwSynchProtocols: 0x00000000
>  dwMechanical: 0x00000000
>   No special characteristics
>  dwFeatures: 0x000102BA
>   ....02 Automatic parameter configuration based on ATR data
>   ....08 Automatic ICC voltage selection
>   ....10 Automatic ICC clock frequency change according to parameters
>   ....20 Automatic baud rate change according to frequency and Fi, Di params
>   ....80 Automatic PPS made by the CCID
>   ..02.. NAD value other than 00 accepted (T=1)
>   01.... TPDU level exchange
>  dwMaxCCIDMessageLength: 271 bytes
>  bClassGetResponse: 0x00
>  bClassEnveloppe: 0x00
>  wLcdLayout: 0x0000
>  bPINSupport: 0x00
>  bMaxCCIDBusySlots: 1

Actions: View

Attachments on bug 858368: 614339 | 614403