Attachment 617028 Details for Bug 860279 – notes.txt

notes.txt

notes.txt (text/plain), 4.57 KB, created by Martin Pavlik on 2012-09-25 13:11:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Pavlik

Created: 2012-09-25 13:11:25 UTC

Size: 4.57 KB

patch

obsolete

>[root@dell-r210ii-06 ~]# ls /etc/sysconfig/network-scripts/ifcfg-*
>/etc/sysconfig/network-scripts/ifcfg-bond4
>/etc/sysconfig/network-scripts/ifcfg-em1
>/etc/sysconfig/network-scripts/ifcfg-em2
>/etc/sysconfig/network-scripts/ifcfg-em2.172
>/etc/sysconfig/network-scripts/ifcfg-lo
>/etc/sysconfig/network-scripts/ifcfg-p1p1
>/etc/sysconfig/network-scripts/ifcfg-p1p2
>/etc/sysconfig/network-scripts/ifcfg-rhevm
>/etc/sysconfig/network-scripts/ifcfg-sw1
>/etc/sysconfig/network-scripts/ifcfg-sw2
>
>
>[root@dell-r210ii-06 ~]# cat /etc/sysconfig/network-scripts/ifcfg-*
>DEVICE=bond4
>ONBOOT=yes
>BONDING_OPTS=mode=4
>BRIDGE=sw2
>MTU=9000
>NM_CONTROLLED=no
>STP=no
>
>DEVICE=em1
>ONBOOT=yes
>HWADDR=D0:67:E5:F0:83:5E
>BRIDGE=rhevm
>BOOTPROTO=dhcp
>NM_CONTROLLED=no
>IPV6FORWARDING=no
>DELAY=0
>PEERNTP=yes
>IPV6INIT=no
>IPV6_AUTOCONF=no
>
>DEVICE=em2
>ONBOOT=yes
>HWADDR=D0:67:E5:F0:83:5F
>NM_CONTROLLED=no
>STP=no
>DEVICE=em2.172
>ONBOOT=yes
>VLAN=yes
>BRIDGE=sw1
>NM_CONTROLLED=no
>STP=no
>
>DEVICE=lo
>IPADDR=127.0.0.1
>NETMASK=255.0.0.0
>NETWORK=127.0.0.0
># If you're having problems with gated making 127.0.0.0/8 a martian,
># you can change this to something else (255.255.255.255, for example)
>BROADCAST=127.255.255.255
>ONBOOT=yes
>NAME=loopback
>
>DEVICE=p1p1
>ONBOOT=yes
>HWADDR=90:E2:BA:04:28:C0
>MASTER=bond4
>SLAVE=yes
>MTU=9000
>NM_CONTROLLED=no
>STP=no
>
>DEVICE=p1p2
>ONBOOT=yes
>HWADDR=90:E2:BA:04:28:C1
>MASTER=bond4
>SLAVE=yes
>MTU=9000
>NM_CONTROLLED=no
>STP=no
>
>DEVICE=rhevm
>ONBOOT=yes
>TYPE=Bridge
>DELAY=0
>BOOTPROTO=dhcp
>NM_CONTROLLED=no
>IPV6FORWARDING=no
>IPV6_AUTOCONF=no
>IPV6INIT=no
>PEERNTP=yes
>
>DEVICE=sw1
>ONBOOT=yes
>TYPE=Bridge
>DELAY=0
>NM_CONTROLLED=no
>STP=no
>DEVICE=sw2
>ONBOOT=yes
>TYPE=Bridge
>DELAY=0
>MTU=9000
>NM_CONTROLLED=no
>STP=no
>
>[root@dell-r210ii-06 ~]# cat /proc/net/bonding/bond4
>Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009)
>
>Bonding Mode: IEEE 802.3ad Dynamic link aggregation
>Transmit Hash Policy: layer2 (0)
>MII Status: down
>MII Polling Interval (ms): 0
>Up Delay (ms): 0
>Down Delay (ms): 0
>
>802.3ad info
>LACP rate: slow
>Aggregator selection policy (ad_select): stable
>bond bond4 has no active aggregator
>
>[root@dell-r210ii-06 ~]# ip a l
>1: lo: <LOOPBACK> mtu 16436 qdisc noqueue state DOWN 
>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>2: p1p1: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN qlen 1000
>    link/ether 90:e2:ba:04:28:c0 brd ff:ff:ff:ff:ff:ff
>3: p1p2: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN qlen 1000
>    link/ether 90:e2:ba:04:28:c1 brd ff:ff:ff:ff:ff:ff
>4: em1: <BROADCAST,MULTICAST,PROMISC> mtu 1500 qdisc mq state DOWN qlen 1000
>    link/ether d0:67:e5:f0:83:5e brd ff:ff:ff:ff:ff:ff
>5: em2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq state DOWN qlen 1000
>    link/ether d0:67:e5:f0:83:5f brd ff:ff:ff:ff:ff:ff
>6: bond0: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN 
>    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>7: bond4: <BROADCAST,MULTICAST,PROMISC,MASTER> mtu 9000 qdisc noqueue state DOWN 
>    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>17: bond1: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN 
>    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>18: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN 
>    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>19: bond3: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN 
>    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
>
>[root@dell-r210ii-06 ~]# ip route
>
>[root@dell-r210ii-06 ~]# iptables -L
>Chain INPUT (policy ACCEPT)
>target     prot opt source               destination         
>ACCEPT     all  --  anywhere             anywhere            state RELATED,ESTABLISHED 
>ACCEPT     icmp --  anywhere             anywhere            
>ACCEPT     all  --  anywhere             anywhere            
>ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:54321 
>ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:16514 
>ACCEPT     tcp  --  anywhere             anywhere            tcp dpt:ssh 
>ACCEPT     tcp  --  anywhere             anywhere            multiport dports xprtld:6166 
>ACCEPT     tcp  --  anywhere             anywhere            multiport dports 49152:49216 
>ACCEPT     udp  --  anywhere             anywhere            udp dpt:snmp 
>REJECT     all  --  anywhere             anywhere            reject-with icmp-host-prohibited 
>
>Chain FORWARD (policy ACCEPT)
>target     prot opt source               destination         
>REJECT     all  --  anywhere             anywhere            PHYSDEV match ! --physdev-is-bridged reject-with icmp-host-prohibited 
>
>Chain OUTPUT (policy ACCEPT)
>target     prot opt source               destination         
>[root@dell-r210ii-06 ~]#

Actions: View

Attachments on bug 860279: 617026 | 617027 | 617028