Attachment 627959 Details for Bug 865380 – host crash log when running perf on host without guest running

host crash log when running perf on host without guest running

crash_host_running_perf.txt (text/plain), 61.35 KB, created by Qunfang Zhang on 2012-10-16 05:51:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qunfang Zhang

Created: 2012-10-16 05:51:56 UTC

Size: 61.35 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-331.el6.x86_64 (mockbuild@x86-023.build.eng.bos.redhat.com) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Oct 12 14:11:45 EDT 2012
>Command line: ro root=/dev/mapper/VolGroup-LogVol_root processor.max_cstate=1 crashkernel=256M console=tty0 console=ttyS0,115200 reboot=pci rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=VolGroup/LogVol_swap crashkernel=auto rd_LVM_LV=VolGroup/LogVol_root rd_LVM_LV=VolGroup/Reserved_LV  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000de358000 (usable)
> BIOS-e820: 00000000de358000 - 00000000de93b000 (reserved)
> BIOS-e820: 00000000de93b000 - 00000000deba0000 (ACPI NVS)
> BIOS-e820: 00000000deba0000 - 00000000debb2000 (ACPI data)
> BIOS-e820: 00000000debb2000 - 00000000debbb000 (ACPI NVS)
> BIOS-e820: 00000000debbb000 - 00000000debc0000 (ACPI data)
> BIOS-e820: 00000000debc0000 - 00000000dec03000 (ACPI NVS)
> BIOS-e820: 00000000dec03000 - 00000000df000000 (usable)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed45000 (reserved)
> BIOS-e820: 00000000fed90000 - 00000000fed94000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000021e000000 (usable)
>DMI 2.7 present.
>SMBIOS version 2.7 @ 0xF9C00
>DMI: Hewlett-Packard HP Compaq Elite 8300 MT/3397, BIOS K01 v02.05 05/07/2012
>e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>last_pfn = 0x21e000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-D3FFF write-protect
>  D4000-E7FFF uncachable
>  E8000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask E00000000 write-back
>  1 base 200000000 mask FE0000000 write-back
>  2 base 0E0000000 mask FE0000000 uncachable
>  3 base 21E000000 mask FFE000000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>  8 disabled
>  9 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 8GB, type WB
>reg 1, base: 8GB, range: 512MB, type WB
>reg 2, base: 3584MB, range: 512MB, type UC
>reg 3, base: 8672MB, range: 32MB, type UC
>total RAM covered: 8160M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 512MB, type WB
>reg 3, base: 4GB, range: 4GB, type WB
>reg 4, base: 8GB, range: 512MB, type WB
>reg 5, base: 8672MB, range: 32MB, type UC
>e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xdf000 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000df000000
> 0000000000 - 00df000000 page 2M
>kernel direct mapping tables up to df000000 @ 8000-d000
>init_memory_mapping: 0000000100000000-000000021e000000
> 0100000000 - 021e000000 page 2M
>kernel direct mapping tables up to 21e000000 @ b000-15000
>RAMDISK: 37146000 - 37fefde8
>ACPI: RSDP 00000000000f9810 00024 (v02 HPQOEM)
>ACPI: XSDT 00000000deba0088 0008C (v01 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>ACPI: FACP 00000000deba9ff0 000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>ACPI: DSDT 00000000deba01a0 09E4A (v02 HPQOEM SLIC-BPC 00000017 INTL 20051117)
>ACPI: FACS 00000000debb2f80 00040
>ACPI: APIC 00000000debaa0e8 000BC (v03 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>ACPI: MCFG 00000000debaa1a8 0003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
>ACPI: HPET 00000000debaa1e8 00038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000005)
>ACPI: SSDT 00000000debaa220 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
>ACPI: SSDT 00000000debaa590 0544C (v01 COMPAQ      WMI 00000001 MSFT 03000001)
>ACPI: SLIC 00000000debaf9e0 00176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
>ACPI: SSDT 00000000debafb58 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
>ACPI: SSDT 00000000debb0508 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
>ACPI: TCPA 00000000debb0fa0 00032 (v02 APTIO4  NAPAASF 00000001 MSFT 01000013)
>ACPI: DMAR 00000000debb0fd8 00080 (v01 INTEL      SNB  00000001 INTL 00000001)
>ACPI: ASF! 00000000debb1058 000A5 (v32 INTEL       HCG 00000001 TFSM 000F4240)
>ACPI: BGRT 00000000debb1100 0003C (v00 HPQOEM SLIC-BPC 01072009 AMI  00010013)
>ACPI: Local APIC address 0xfee00000
>Setting APIC routing to flat.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000021e000000
>Bootmem setup node 0 0000000000000000-000000021e000000
>  NODE_DATA [0000000000010000 - 0000000000043fff]
>  bootmap [0000000000044000 -  0000000000087bff] pages 44
>(8 early reservations) ==> bootmem [0000000000 - 021e000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0002017624]    TEXT DATA BSS ==> [0001000000 - 0002017624]
>  #3 [0037146000 - 0037fefde8]          RAMDISK ==> [0037146000 - 0037fefde8]
>  #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
>  #5 [0002018000 - 000201835a]              BRK ==> [0002018000 - 000201835a]
>  #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
>  #7 [000000b000 - 0000010000]          PGTABLE ==> [000000b000 - 0000010000]
>found SMP MP-table at [ffff8800000f4d50] f4d50
>Reserving 129MB of memory at 48MB for crashkernel (System RAM: 8672MB)
> [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x0021e000
>Movable zone start PFN for each node
>early_node_map[4] active PFN ranges
>    0: 0x00000001 -> 0x0000009f
>    0: 0x00000100 -> 0x000de358
>    0: 0x000dec03 -> 0x000df000
>    0: 0x00100000 -> 0x0021e000
>On node 0 totalpages: 2082547
>  DMA zone: 56 pages used for memmap
>  DMA zone: 107 pages reserved
>  DMA zone: 3835 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 892813 pages, LIFO batch:31
>  Normal zone: 16016 pages used for memmap
>  Normal zone: 1155440 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>Setting APIC routing to flat.
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a701 base: 0xfed00000
>SMP: Allowing 8 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>PM: Registered nosave memory: 00000000de358000 - 00000000de93b000
>PM: Registered nosave memory: 00000000de93b000 - 00000000deba0000
>PM: Registered nosave memory: 00000000deba0000 - 00000000debb2000
>PM: Registered nosave memory: 00000000debb2000 - 00000000debbb000
>PM: Registered nosave memory: 00000000debbb000 - 00000000debc0000
>PM: Registered nosave memory: 00000000debc0000 - 00000000dec03000
>PM: Registered nosave memory: 00000000df000000 - 00000000f8000000
>PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
>PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
>PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
>PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
>PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
>PM: Registered nosave memory: 00000000fed45000 - 00000000fed90000
>PM: Registered nosave memory: 00000000fed90000 - 00000000fed94000
>PM: Registered nosave memory: 00000000fed94000 - 00000000fee00000
>PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
>PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
>PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>Allocating PCI resources starting at df000000 (gap: df000000:19000000)
>Booting paravirtualized kernel on bare hardware
>NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94552 r8192 d24232 u262144
>pcpu-alloc: s94552 r8192 d24232 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2052088
>Policy zone: Normal
>Kernel command line: ro root=/dev/mapper/VolGroup-LogVol_root processor.max_cstate=1 crashkernel=256M console=tty0 console=ttyS0,115200 reboot=pci rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rd_LVM_LV=VolGroup/LogVol_swap crashkernel=129M@0M rd_LVM_LV=VolGroup/LogVol_root rd_LVM_LV=VolGroup/Reserved_LV  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
>Checking aperture...
>No AGP bridge found
>dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 7982284k/8880128k available (5281k kernel code, 549940k absent, 347904k reserved, 7047k data, 1264k init)
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:472
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>console [ttyS0] enabled
>allocated 33554432 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 3392.514 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 6785.02 BogoMIPS (lpj=3392514)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 9 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>using mwait in idle threads.
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 21324 entries in 84 pages
>dmar: Host address width 36
>dmar: DRHD base: 0x000000fed90000 flags: 0x1
>dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
>dmar: RMRR base: 0x000000de90e000 end: 0x000000de92afff
>dmar: No ATSR found
>IOAPIC id 2 under DRHD base 0xfed90000
>HPET id 0 under DRHD base 0xfed90000
>Enabled IRQ remapping in x2apic mode
>Enabling x2apic
>Enabled x2apic
>Setting APIC routing to cluster x2apic
>  alloc irq_desc for 24 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>alloc irq_2_iommu on node 0
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz stepping 09
>Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
>... version:                3
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             000000070000000f
>NMI watchdog enabled, takes one hw-pmu counter.
>Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 Ok.
>Brought up 8 CPUs
>Total of 8 processors activated (54280.22 BogoMIPS).
>sizeof(vma)=200 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=592 bytes
>sizeof(dentry)=192 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=232 bytes
>sizeof(task_struct)=2648 bytes
>devtmpfs: initialized
>PM: Registering ACPI NVS region at de93b000 (2510848 bytes)
>PM: Registering ACPI NVS region at debb2000 (36864 bytes)
>PM: Registering ACPI NVS region at debc0000 (274432 bytes)
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
>PCI: MCFG area at f8000000 reserved in E820
>PCI: Using MMCONFIG at f8000000 - fbffffff
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [FN00] (off)
>ACPI: Power Resource [FN01] (off)
>ACPI: Power Resource [FN02] (off)
>ACPI: Power Resource [FN03] (off)
>ACPI: Power Resource [FN04] (off)
>ACPI: No dock devices found.
>HEST: Table not found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
>pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
>pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
>pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
>pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:14.0: reg 10: [mem 0xf7f20000-0xf7f2ffff 64bit]
>pci 0000:00:14.0: PME# supported from D3hot D3cold
>pci 0000:00:14.0: PME# disabled
>pci 0000:00:16.0: reg 10: [mem 0xf7f3c000-0xf7f3c00f 64bit]
>pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:16.0: PME# disabled
>pci 0000:00:16.3: reg 10: [io  0xf0a0-0xf0a7]
>pci 0000:00:16.3: reg 14: [mem 0xf7f3a000-0xf7f3afff]
>pci 0000:00:19.0: reg 10: [mem 0xf7f00000-0xf7f1ffff]
>pci 0000:00:19.0: reg 14: [mem 0xf7f39000-0xf7f39fff]
>pci 0000:00:19.0: reg 18: [io  0xf040-0xf05f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:19.0: PME# disabled
>pci 0000:00:1a.0: reg 10: [mem 0xf7f38000-0xf7f383ff]
>pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: PME# disabled
>pci 0000:00:1b.0: reg 10: [mem 0xf7f30000-0xf7f33fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1d.0: reg 10: [mem 0xf7f37000-0xf7f373ff]
>pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: PME# disabled
>pci 0000:00:1f.2: reg 10: [io  0xf090-0xf097]
>pci 0000:00:1f.2: reg 14: [io  0xf080-0xf083]
>pci 0000:00:1f.2: reg 18: [io  0xf070-0xf077]
>pci 0000:00:1f.2: reg 1c: [io  0xf060-0xf063]
>pci 0000:00:1f.2: reg 20: [io  0xf020-0xf03f]
>pci 0000:00:1f.2: reg 24: [mem 0xf7f36000-0xf7f367ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 10: [mem 0xf7f35000-0xf7f350ff 64bit]
>pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
>pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xf7e40000-0xf7e43fff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC control (0x18) granted
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>  alloc irq_desc for 25 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>  alloc irq_desc for 27 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>  alloc irq_desc for 28 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>  alloc irq_desc for 29 on node 0
>  alloc kstat_irqs on node 0
>alloc irq_2_iommu on node 0
>HPET: 8 timers in total, 5 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 25, 26, 27, 28, 29, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>hpet: hpet2 irq 25 for MSI
>hpet: hpet3 irq 26 for MSI
>hpet: hpet4 irq 27 for MSI
>hpet: hpet5 irq 28 for MSI
>hpet: hpet6 irq 29 for MSI
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:01: [mem 0xfed40000-0xfed44fff]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:02: [io  0x0000-0x001f]
>pnp 00:02: [io  0x0081-0x0091]
>pnp 00:02: [io  0x0093-0x009f]
>pnp 00:02: [io  0x00c0-0x00df]
>pnp 00:02: [dma 4]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:03: [mem 0xff000000-0xffffffff]
>pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>pnp 00:04: [mem 0xfed00000-0xfed003ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x002e-0x002f]
>pnp 00:05: [io  0x004e-0x004f]
>pnp 00:05: [io  0x0061]
>pnp 00:05: [io  0x0063]
>pnp 00:05: [io  0x0065]
>pnp 00:05: [io  0x0067]
>pnp 00:05: [io  0x0070]
>pnp 00:05: [io  0x0080]
>pnp 00:05: [io  0x0092]
>pnp 00:05: [io  0x00b2-0x00b3]
>pnp 00:05: [io  0x0680-0x069f]
>pnp 00:05: [io  0x0200-0x020f]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0xffff]
>pnp 00:05: [io  0x0400-0x0453]
>pnp 00:05: [io  0x0458-0x047f]
>pnp 00:05: [io  0x0500-0x057f]
>pnp 00:05: [io  0x164e-0x164f]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: [io  0x0070-0x0077]
>pnp 00:06: [irq 8]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:07: [io  0x0454-0x0457]
>pnp 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
>pnp 00:08: [io  0x0a20-0x0a3f]
>pnp 00:08: [io  0x0800-0x07ff disabled]
>pnp 00:08: [io  0x0a10-0x0a1f]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:09: [io  0x0060]
>pnp 00:09: [io  0x0064]
>pnp 00:09: [irq 1]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>pnp 00:0a: [irq 12]
>pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
>pnp 00:0b: [io  0x0010-0x001f]
>pnp 00:0b: [io  0x0022-0x003f]
>pnp 00:0b: [io  0x0044-0x005f]
>pnp 00:0b: [io  0x0062-0x0063]
>pnp 00:0b: [io  0x0065-0x006f]
>pnp 00:0b: [io  0x0072-0x007f]
>pnp 00:0b: [io  0x0080]
>pnp 00:0b: [io  0x0084-0x0086]
>pnp 00:0b: [io  0x0088]
>pnp 00:0b: [io  0x008c-0x008e]
>pnp 00:0b: [io  0x0090-0x009f]
>pnp 00:0b: [io  0x00a2-0x00bf]
>pnp 00:0b: [io  0x00e0-0x00ef]
>pnp 00:0b: [io  0x04d0-0x04d1]
>pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0c: [io  0x00f0-0x00ff]
>pnp 00:0c: [irq 13]
>pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:0d: [io  0x03f8-0x03ff]
>pnp 00:0d: [irq 4]
>pnp 00:0d: [dma 0 disabled]
>pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:0e: [mem 0xfed40000-0xfed44fff]
>pnp 00:0e: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>pnp 00:0f: [mem 0xfed1c000-0xfed1ffff]
>pnp 00:0f: [mem 0xfed10000-0xfed17fff]
>pnp 00:0f: [mem 0xfed18000-0xfed18fff]
>pnp 00:0f: [mem 0xfed19000-0xfed19fff]
>pnp 00:0f: [mem 0xf8000000-0xfbffffff]
>pnp 00:0f: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0f: [mem 0xfed90000-0xfed93fff]
>pnp 00:0f: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0f: [mem 0xff000000-0xffffffff]
>pnp 00:0f: [mem 0xfee00000-0xfeefffff]
>pnp 00:0f: [mem 0xf0000000-0xf0000fff]
>pnp 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x0200-0x020f] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x0453] has been reserved
>system 00:05: [io  0x0458-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:07: [io  0x0454-0x0457] has been reserved
>system 00:08: [io  0x0a20-0x0a3f] has been reserved
>system 00:08: [io  0x0a10-0x0a1f] has been reserved
>system 00:0b: [io  0x04d0-0x04d1] has been reserved
>system 00:0f: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0f: [mem 0xfed10000-0xfed17fff] has been reserved
>system 00:0f: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0f: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0f: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0f: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0f: [mem 0xfed90000-0xfed93fff] could not be reserved
>system 00:0f: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0f: [mem 0xff000000-0xffffffff] has been reserved
>system 00:0f: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:0f: [mem 0xf0000000-0xf0000fff] has been reserved
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
>pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>pci 0000:00:1e.0: PCI bridge to [bus 02-02]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>  alloc irq_desc for 16 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:00: resource 11 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:00: resource 12 [mem 0xe0000000-0xfeafffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
>pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:02: resource 7 [mem 0x000d4000-0x000d7fff]
>pci_bus 0000:02: resource 8 [mem 0x000d8000-0x000dbfff]
>pci_bus 0000:02: resource 9 [mem 0x000dc000-0x000dffff]
>pci_bus 0000:02: resource 10 [mem 0x000e0000-0x000e3fff]
>pci_bus 0000:02: resource 11 [mem 0x000e4000-0x000e7fff]
>pci_bus 0000:02: resource 12 [mem 0xe0000000-0xfeafffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:14.0: PCI INT A disabled
>pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1a.0: PCI INT A disabled
>  alloc irq_desc for 23 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>pci 0000:00:1d.0: PCI INT A disabled
>pci 0000:01:00.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 15015k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1350365102.314:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 15619
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>ksign: Installing public key data
>Loading keyring
>- Added public key 5B8352675D7C570B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: setting latency timer to 64
>  alloc irq_desc for 30 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>pcieport 0000:00:01.0: irq 30 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x3A
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ipmi message handler version 39.2
>IPMI System Interface driver.
>ipmi_si: Adding default-specified kcs state machine
>ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified smic state machine
>ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified bt state machine
>ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Unable to find any System Interface(s)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>ACPI: Fan [FAN2] (off)
>ACPI: Fan [FAN3] (off)
>ACPI: Fan [FAN4] (off)
>ACPI: acpi_idle yielding to intel_idleACPI: SSDT 00000000de934018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
>ACPI: SSDT 00000000de935a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
>ACPI: SSDT 00000000de936c18 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ00] (28 C)
>thermal LNXTHERM:02: registered as thermal_zone1
>ACPI: Thermal Zone [TZ01] (30 C)
>ERST: Table is not found!
>GHES: HEST is not enabled!
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>tpm_tis 00:0e: 1.2 TPM (device-id 0xB, rev-id 16)
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  alloc irq_desc for 19 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input2
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f38000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-331.el6.x86_64 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f37000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-331.el6.x86_64 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:06: setting system clock to 2012-10-16 05:25:03 UTC (1350365103)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1264k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 844k freed
>Freeing unused kernel memory: 1688k freed
>dracut: dracut-004-283.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.7-ioctl (2012-06-01) initialised: dm-devel@redhat.com
>udev: starting version 147
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm] initializing kernel modesetting (CAICOS 0x1002:0x677B 0x103C:0x90B7).
>[drm] register mmio base: 0xF7E20000
>[drm] register mmio size: 131072
>ATOM BIOS: HP
>radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 4000548 kiB
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>  alloc irq_desc for 31 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>radeon 0000:01:00.0: irq 31 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] probing gen 2 caps for device 8086:151 = 3/e
>[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[drm] Loading CAICOS Microcode
>platform radeon_cp.0: firmware: requesting radeon/CAICOS_pfp.bin
>platform radeon_cp.0: firmware: requesting radeon/CAICOS_me.bin
>platform radeon_cp.0: firmware: requesting radeon/BTC_rlc.bin
>platform radeon_cp.0: firmware: requesting radeon/CAICOS_mc.bin
>[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8802155cfc00
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] ring test on 0 succeeded in 3 usecs
>[drm] ib test on ring 0 succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DP-1
>[drm]   HPD2
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY1
>[drm] Connector 1:
>[drm]   DVI-I-1
>[drm]   HPD4
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Internal thermal controller with fan control
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xE0142000
>[drm] vram apper at 0xE0000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>fbcon: radeondrmfb (fb0) is primary device
>usb 1-1: new high speed USB device number 2 using ehci_hcd
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>[drm] Initialized radeon 2.22.0 20080528 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>ACPI: WMI: Mapper loaded
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>ACPI: Video Device [PEG0] (multi-head: yes  rom: no  post: no)
>acpi device:1a: registered as cooling_device13
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/LNXVIDEO:01/input/input4
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>video: probe of LNXVIDEO:01 failed with error -22
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>  alloc irq_desc for 32 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36100 irq 32
>ata2: DUMMY
>ata3: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36200 irq 32
>ata4: DUMMY
>ata5: DUMMY
>ata6: DUMMY
>usb 2-1: new high speed USB device number 2 using ehci_hcd
>Refined TSC clocksource calibration: 3392.304 MHz.
>Switching to clocksource tsc
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata1.00: ACPI _SDD failed (AE 0x5)
>ata3.00: ACPI _SDD failed (AE 0x5)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>ata3.00: ACPI _SDD failed (AE 0x5)
>ata3.00: ACPI: failed the second time, disabled
>ata3.00: ATAPI: hp       CDDVDW SH-216ALN, HA5A, max UDMA/100, ATAPI AN
>ata1.00: ACPI _SDD failed (AE 0x5)
>ata1.00: ACPI: failed the second time, disabled
>ata1.00: ATA-8: Hitachi HDS721050CLA660, JP2OA41A, max UDMA/133
>ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
>ata3.00: configured for UDMA/100
>scsi 2:0:0:0: CD-ROM            hp       CDDVDW SH-216ALN HA5A PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>dracut: Scanning devices sda2  for LVM logical volumes VolGroup/LogVol_swap VolGroup/LogVol_root VolGroup/Reserved_LV 
>dracut: inactive '/dev/VolGroup/LogVol_swap' [16.00 GiB] inherit
>dracut: inactive '/dev/VolGroup/Reserved_LV' [40.00 GiB] inherit
>dracut: inactive '/dev/VolGroup/LogVol_root' [409.25 GiB] inherit
>EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: 
>dracut: Mounted root filesystem /dev/mapper/VolGroup-LogVol_root
>dracut: Loading SELinux policy
>SELinux: 2048 avtab hash slots, 250818 rules.
>SELinux: 2048 avtab hash slots, 250818 rules.
>SELinux:  9 users, 12 roles, 3761 types, 187 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 250818 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-2, type ext4), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>type=1403 audit(1350365111.176:2): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>udev: starting version 147
>  alloc irq_desc for 22 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>  alloc irq_desc for 33 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
>snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC221: SKU not ready 0x411111f0
>input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>  alloc irq_desc for 17 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>  alloc irq_desc for 34 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>snd_hda_intel 0000:01:00.1: irq 34 for MSI/MSI-X
>snd_hda_intel 0000:01:00.1: setting latency timer to 64
>input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
>e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
>e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>  alloc irq_desc for 20 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>  alloc irq_desc for 35 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) ac:16:2d:05:51:ec
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
>iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>  alloc irq_desc for 18 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: resource 0000:00:1f.3 [io  0xf000-0xf01f] conflicts with ACPI region SMBI [io 0xf000-0xf00f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>xhci_hcd 0000:00:14.0: setting latency timer to 64
>xhci_hcd 0000:00:14.0: xHCI Host Controller
>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7f20000
>  alloc irq_desc for 36 on node -1
>  alloc kstat_irqs on node -1
>alloc irq_2_iommu on node -1
>xhci_hcd 0000:00:14.0: irq 36 for MSI/MSI-X
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: xHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-331.el6.x86_64 xhci_hcd
>usb usb3: SerialNumber: 0000:00:14.0
>usb usb3: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>xhci_hcd 0000:00:14.0: xHCI Host Controller
>xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: xHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-331.el6.x86_64 xhci_hcd
>usb usb4: SerialNumber: 0000:00:14.0
>usb usb4: configuration #1 chosen from 1 choice
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 4 ports detected
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 2:0:0:0: Attached scsi generic sg1 type 5
>microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x12
>platform microcode: firmware: requesting intel-ucode/06-3a-09
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>usb 3-1: new full speed USB device number 2 using xhci_hcd
>usb 3-1: New USB device found, idVendor=0557, idProduct=7000
>usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
>hub 3-1:1.0: USB hub found
>hub 3-1:1.0: 4 ports detected
>usb 3-1.1: new low speed USB device number 3 using xhci_hcd
>usb 3-1.1: New USB device found, idVendor=0557, idProduct=2213
>usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1.1: Product: CS-1734A V4.2.416
>usb 3-1.1: Manufacturer: ATEN
>usb 3-1.1: configuration #1 chosen from 1 choice
>usb 3-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>usb 3-1.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
>input: ATEN CS-1734A V4.2.416 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input10
>generic-usb 0003:0557:2213.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN CS-1734A V4.2.416] on usb-0000:00:14.0-1.1/input0
>input: ATEN CS-1734A V4.2.416 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input11
>generic-usb 0003:0557:2213.0002: input,hidraw1: USB HID v1.00 Mouse [ATEN CS-1734A V4.2.416] on usb-0000:00:14.0-1.1/input1
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
>SELinux: initialized (dev sda1, type ext4), uses xattr
>Adding 16777208k swap on /dev/mapper/VolGroup-LogVol_swap.  Priority:-1 extents:1 across:16777208k 
>Adding 41943032k swap on /dev/mapper/VolGroup-Reserved_LV.  Priority:-2 extents:1 across:41943032k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Bridge firewalling registered
>e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 35 for MSI/MSI-X
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>device eth0 entered promiscuous mode
>e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>switch: port 1(eth0) entering forwarding state
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>switch: no IPv6 routers present
>eth0: no IPv6 routers present
>device tap0 entered promiscuous mode
>switch: port 2(tap0) entering forwarding state
>kvm: 2224: cpu0 unhandled rdmsr: 0x345
>kvm: 2224: cpu0 unhandled wrmsr: 0x680 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x6c0 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x681 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x6c1 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x682 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x6c2 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x683 data 0
>kvm: 2224: cpu0 unhandled wrmsr: 0x6c3 data 0
>tap0: no IPv6 routers present
>------------[ cut here ]------------
>WARNING: at arch/x86/kernel/cpu/perf_event.c:1352 x86_pmu_stop+0x138/0x150() (Not tainted)
>Hardware name: HP Compaq Elite 8300 MT
>Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bridge stp llc ipv6 vhost_net macvtap macvlan tun kvm_intel kvm tpm_infineon microcode sg serio_raw xhci_hcd i2c_i801 iTCO_wdt iTCO_vendor_support e1000e snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif ahci video output wmi radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
>Pid: 2239, comm: qemu-kvm Not tainted 2.6.32-331.el6.x86_64 #1
>Call Trace:
> [<ffffffff8106b927>] ? warn_slowpath_common+0x87/0xc0
> [<ffffffff8106b97a>] ? warn_slowpath_null+0x1a/0x20
> [<ffffffff8101be38>] ? x86_pmu_stop+0x138/0x150
> [<ffffffff810138f3>] ? native_sched_clock+0x13/0x80
> [<ffffffff81012c89>] ? sched_clock+0x9/0x10
> [<ffffffff8101ca3d>] ? x86_pmu_enable+0x9d/0x280
> [<ffffffff8110ea8b>] ? perf_pmu_enable+0x2b/0x40
> [<ffffffff811114f7>] ? perf_event_context_sched_in+0xa7/0xe0
> [<ffffffff811119d4>] ? __perf_event_task_sched_in+0x64/0x70
> [<ffffffff81057ddd>] ? finish_task_switch+0xad/0xe0
> [<ffffffff8151c920>] ? thread_return+0x4e/0x76e
> [<ffffffffa03e508c>] ? apic_reg_write+0x28c/0x680 [kvm]
> [<ffffffff810a7489>] ? futex_wait_queue_me+0xb9/0xf0
> [<ffffffff810a85f8>] ? futex_wait+0x1f8/0x380
> [<ffffffffa0319a96>] ? vmx_vcpu_put+0x16/0x40 [kvm_intel]
> [<ffffffff810a9d61>] ? do_futex+0x121/0xb60
> [<ffffffff8101cab4>] ? x86_pmu_enable+0x114/0x280
> [<ffffffff81195e52>] ? vfs_ioctl+0x22/0xa0
> [<ffffffff8119631a>] ? do_vfs_ioctl+0x3aa/0x580
> [<ffffffff810aa81b>] ? sys_futex+0x7b/0x170
> [<ffffffff810db7d2>] ? audit_syscall_entry+0x272/0x2a0
> [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
>---[ end trace 4d05d0af66374271 ]---
>------------[ cut here ]------------
>WARNING: at arch/x86/kernel/cpu/perf_event.c:1270 x86_pmu_start+0xef/0x130() (Tainted: G        W  ---------------   )
>Hardware name: HP Compaq Elite 8300 MT
>Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bridge stp llc ipv6 vhost_net macvtap macvlan tun kvm_intel kvm tpm_infineon microcode sg serio_raw xhci_hcd i2c_i801 iTCO_wdt iTCO_vendor_support e1000e snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif ahci video output wmi radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
>Pid: 2239, comm: qemu-kvm Tainted: G        W  ---------------    2.6.32-331.el6.x86_64 #1
>Call Trace:
> [<ffffffff8106b927>] ? warn_slowpath_common+0x87/0xc0
> [<ffffffff8106b97a>] ? warn_slowpath_null+0x1a/0x20
> [<ffffffff8101c95f>] ? x86_pmu_start+0xef/0x130
> [<ffffffff8101cbca>] ? x86_pmu_enable+0x22a/0x280
> [<ffffffff8110ea8b>] ? perf_pmu_enable+0x2b/0x40
> [<ffffffff811114f7>] ? perf_event_context_sched_in+0xa7/0xe0
> [<ffffffff811119d4>] ? __perf_event_task_sched_in+0x64/0x70
> [<ffffffff81057ddd>] ? finish_task_switch+0xad/0xe0
> [<ffffffff8151c920>] ? thread_return+0x4e/0x76e
> [<ffffffffa0317136>] ? __vmx_load_host_state+0xe6/0x100 [kvm_intel]
> [<ffffffffa03c824b>] ? kvm_arch_vcpu_put+0x4b/0x60 [kvm]
> [<ffffffffa03bed45>] ? kvm_vcpu_block+0x75/0xc0 [kvm]
> [<ffffffff81094370>] ? autoremove_wake_function+0x0/0x40
> [<ffffffffa03d25a4>] ? kvm_arch_vcpu_ioctl_run+0x5b4/0x1060 [kvm]
> [<ffffffffa03bb172>] ? kvm_vcpu_ioctl+0x522/0x670 [kvm]
> [<ffffffff8101cab4>] ? x86_pmu_enable+0x114/0x280
> [<ffffffff81195e52>] ? vfs_ioctl+0x22/0xa0
> [<ffffffff8119631a>] ? do_vfs_ioctl+0x3aa/0x580
> [<ffffffff81196571>] ? sys_ioctl+0x81/0xa0
> [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
>---[ end trace 4d05d0af66374272 ]---
>------------[ cut here ]------------
>WARNING: at arch/x86/kernel/cpu/perf_event.c:1277 x86_pmu_start+0x119/0x130() (Tainted: G        W  ---------------   )
>Hardware name: HP Compaq Elite 8300 MT
>Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bridge stp llc ipv6 vhost_net macvtap macvlan tun kvm_intel kvm tpm_infineon microcode sg serio_raw xhci_hcd i2c_i801 iTCO_wdt iTCO_vendor_support e1000e snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif ahci video output wmi radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
>Pid: 2239, comm: qemu-kvm Tainted: G        W  ---------------    2.6.32-331.el6.x86_64 #1
>Call Trace:
> [<ffffffff8106b927>] ? warn_slowpath_common+0x87/0xc0
> [<ffffffff8106b97a>] ? warn_slowpath_null+0x1a/0x20
> [<ffffffff8101c989>] ? x86_pmu_start+0x119/0x130
> [<ffffffff8101cbca>] ? x86_pmu_enable+0x22a/0x280
> [<ffffffff8110ea8b>] ? perf_pmu_enable+0x2b/0x40
> [<ffffffff811114f7>] ? perf_event_context_sched_in+0xa7/0xe0
> [<ffffffff811119d4>] ? __perf_event_task_sched_in+0x64/0x70
> [<ffffffff81057ddd>] ? finish_task_switch+0xad/0xe0
> [<ffffffff8151c920>] ? thread_return+0x4e/0x76e
> [<ffffffffa0317136>] ? __vmx_load_host_state+0xe6/0x100 [kvm_intel]
> [<ffffffffa03bed45>] ? kvm_vcpu_block+0x75/0xc0 [kvm]
> [<ffffffff81094370>] ? autoremove_wake_function+0x0/0x40
> [<ffffffffa03d25a4>] ? kvm_arch_vcpu_ioctl_run+0x5b4/0x1060 [kvm]
> [<ffffffffa03bb172>] ? kvm_vcpu_ioctl+0x522/0x670 [kvm]
> [<ffffffff8101cab4>] ? x86_pmu_enable+0x114/0x280
> [<ffffffff81195e52>] ? vfs_ioctl+0x22/0xa0
> [<ffffffff8119631a>] ? do_vfs_ioctl+0x3aa/0x580
> [<ffffffff81196571>] ? sys_ioctl+0x81/0xa0
> [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b
>---[ end trace 4d05d0af66374273 ]---
>switch: port 2(tap0) entering disabled state
>device tap0 left promiscuous mode
>switch: port 2(tap0) entering disabled state
>BUG: unable to handle kernel paging request at ffffffff8e2cacec
>IP: [<ffffffff81020824>] x86_schedule_events+0x114/0x330
>PGD 1a87067 PUD 1a8b063 PMD 0 
>Oops: 0000 [#1] SMP 
>last sysfs file: /sys/devices/system/cpu/online
>CPU 2 
>Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bridge stp llc ipv6 vhost_net macvtap macvlan tun kvm_intel kvm tpm_infineon microcode sg serio_raw xhci_hcd i2c_i801 iTCO_wdt iTCO_vendor_support e1000e snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 sr_mod cdrom sd_mod crc_t10dif ahci video output wmi radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan]
>
>Pid: 2952, comm: run-mozilla.sh Tainted: G        W  ---------------    2.6.32-331.el6.x86_64 #1 Hewlett-Packard HP Compaq Elite 8300 MT/3397
>RIP: 0010:[<ffffffff81020824>]  [<ffffffff81020824>] x86_schedule_events+0x114/0x330
>RSP: 0018:ffff8801fb6a1568  EFLAGS: 00010017
>RAX: 00000000626d6f7a RBX: ffff88002828cc48 RCX: 0000000000000001
>RDX: 0000000000000004 RSI: ffff880215e89400 RDI: ffff8801fb6a1798
>RBP: ffff8801fb6a17d8 R08: ffffffff81deff00 R09: ffff8801fb6a17e8
>R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000004
>R13: ffff8801fb6a1598 R14: ffff88002828cc40 R15: 0000000000000004
>FS:  00007ff8d3428700(0000) GS:ffff880028280000(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: ffffffff8e2cacec CR3: 00000001e430b000 CR4: 00000000001406e0
>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
>Process run-mozilla.sh (pid: 2952, threadinfo ffff8801fb6a0000, task ffff8802154ac040)
>Stack:
> ffff8801fb6a15c8 ffff88002828cc40 ffff8801fb6a15a8 ffff8801fb6a17e8
><d> 00000004fb6a15c8 ffffffffa00a21b6 ffffffff81bfa0e0 ffffffff81deff00
><d> ffffffff81deff00 ffffffff81bfa0e0 ffff88021552c0d0 ffff88021552c000
>Call Trace:
> [<ffffffffa00a21b6>] ? ahci_qc_prep+0xf6/0x1c0 [ahci]
> [<ffffffff813907b9>] ? ata_qc_issue+0x1d9/0x340
> [<ffffffff813988c0>] ? ata_scsi_rw_xlat+0x0/0x200
> [<ffffffff813962c7>] ? ata_scsi_translate+0xa7/0x180
> [<ffffffff8137b610>] ? scsi_done+0x0/0x60
> [<ffffffff8137b610>] ? scsi_done+0x0/0x60
> [<ffffffff81399a62>] ? ata_scsi_queuecmd+0xd2/0x2d0
> [<ffffffff8127dd47>] ? kobject_put+0x27/0x60
> [<ffffffff81363907>] ? put_device+0x17/0x20
> [<ffffffff81382fcb>] ? scsi_request_fn+0xdb/0x790
> [<ffffffff8107e6fd>] ? del_timer+0x7d/0xe0
> [<ffffffff81276856>] ? cfq_service_tree_add+0x226/0x530
> [<ffffffff8101e744>] ? intel_pmu_disable_event+0x234/0x270
> [<ffffffff8101bc49>] ? x86_pmu_add+0xb9/0x170
> [<ffffffff8101baf7>] x86_pmu_commit_txn+0x67/0xc0
> [<ffffffff8101cd24>] ? x86_pmu_del+0x104/0x110
> [<ffffffff8101c458>] ? intel_pmu_enable_all+0xb8/0x160
> [<ffffffff8101cab4>] ? x86_pmu_enable+0x114/0x280
> [<ffffffff8110ea8b>] ? perf_pmu_enable+0x2b/0x40
> [<ffffffff811110ea>] group_sched_in+0x13a/0x170
> [<ffffffff81012c89>] ? sched_clock+0x9/0x10
> [<ffffffff81111408>] ctx_sched_in+0x2e8/0x330
> [<ffffffff811114e7>] perf_event_context_sched_in+0x97/0xe0
> [<ffffffff811119d4>] __perf_event_task_sched_in+0x64/0x70
> [<ffffffff81057ddd>] finish_task_switch+0xad/0xe0
> [<ffffffff8151c920>] thread_return+0x4e/0x76e
> [<ffffffff8111a160>] ? sync_page_killable+0x0/0x40
> [<ffffffff8151d0b3>] io_schedule+0x73/0xc0
> [<ffffffff8111a14d>] sync_page+0x3d/0x50
> [<ffffffff8111a16e>] sync_page_killable+0xe/0x40
> [<ffffffff8151d91a>] __wait_on_bit_lock+0x5a/0xc0
> [<ffffffff8111a077>] __lock_page_killable+0x67/0x70
> [<ffffffff810943b0>] ? wake_bit_function+0x0/0x50
> [<ffffffff81119f1e>] ? find_get_page+0x1e/0xa0
> [<ffffffff8111bdc4>] generic_file_aio_read+0x4b4/0x700
> [<ffffffff81181aca>] do_sync_read+0xfa/0x140
> [<ffffffff81094370>] ? autoremove_wake_function+0x0/0x40
> [<ffffffff8122ad1b>] ? selinux_file_permission+0xfb/0x150
> [<ffffffff8121e0c6>] ? security_file_permission+0x16/0x20
> [<ffffffff811824d5>] vfs_read+0xb5/0x1a0
> [<ffffffff81188f06>] kernel_read+0x46/0x60
> [<ffffffff81188ffc>] prepare_binprm+0xdc/0x110
> [<ffffffff8118affc>] do_execve+0x1bc/0x340
> [<ffffffff8128879a>] ? strncpy_from_user+0x4a/0x90
> [<ffffffff810095ea>] sys_execve+0x4a/0x80
> [<ffffffff8100b54a>] stub_execve+0x6a/0xc0
>Code: 41 89 04 11 83 c1 01 41 39 ca 7e 2b 48 8b b3 28 05 00 00 4d 8b 44 55 08 48 83 c3 08 48 83 c2 04 8b 86 10 01 00 00 83 f8 ff 74 0c <41> 0f a3 00 45 19 c0 45 85 c0 75 b0 3b 8d b4 fd ff ff 0f 84 e4 
>RIP  [<ffffffff81020824>] x86_schedule_events+0x114/0x330
> RSP <ffff8801fb6a1568>
>CR2: ffffffff8e2cacec

Actions: View

Attachments on bug 865380: 625475 | 627958 | 627959 | 632035 | 632179