Attachment 632276 Details for Bug 869383 – dmesg from 3.6.3-1.1 (with the patch)

dmesg from 3.6.3-1.1 (with the patch)

3.6.3.1.1 (text/plain), 44.17 KB, created by Damian Wrobel on 2012-10-23 18:21:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Damian Wrobel

Created: 2012-10-23 18:21:46 UTC

Size: 44.17 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.6.3-1.1.fc17.i686.PAE (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Tue Oct 23 17:26:27 CEST 2012
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x00000000bf7affff] usable
>BIOS-e820: [mem 0x00000000bf7b0000-0x00000000bf7c53ff] reserved
>BIOS-e820: [mem 0x00000000bf7c5400-0x00000000bf7e7fb7] ACPI NVS
>BIOS-e820: [mem 0x00000000bf7e7fb8-0x00000000bfffffff] reserved
>BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>BIOS-e820: [mem 0x00000000fed20000-0x00000000fed99fff] reserved
>BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
>BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
>BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
>BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Hewlett-Packard HP Compaq 6720s/30D8, BIOS 68MDU Ver. F.0B 06/20/2008
>e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CFFFF write-protect
>  D0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 080000000 mask FC0000000 write-back
>  2 base 100000000 mask FC0000000 write-back
>  3 base 0BF800000 mask FFF800000 uncachable
>  4 base 0FEDA0000 mask FFFFE0000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 4GB, range: 1GB, type WB
>reg 3, base: 3064MB, range: 8MB, type UC
>reg 4, base: 4175488KB, range: 128KB, type UC
>total RAM covered: 4088M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 16M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3064MB, range: 8MB, type UC
>reg 3, base: 4GB, range: 1GB, type WB
>e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
>initial memory mapped: [mem 0x00000000-0x013fffff]
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: [mem 0x00000000-0x375fdfff]
> [mem 0x00000000-0x001fffff] page 4k
> [mem 0x00200000-0x373fffff] page 2M
> [mem 0x37400000-0x375fdfff] page 4k
>kernel direct mapping tables up to 0x375fdfff @ [mem 0x013f7000-0x013fffff]
>RAMDISK: [mem 0x35e98000-0x36f43fff]
>ACPI: RSDP 000fc600 00024 (v02 HP    )
>ACPI: XSDT bf7c81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>ACPI: FACP bf7c8084 000F4 (v04 HP     30D8     00000003 HP   00000001)
>ACPI: DSDT bf7c84cc 12C36 (v01 HP      nc6xxxs 00010000 MSFT 03000001)
>ACPI: FACS bf7e7d80 00040
>ACPI: SLIC bf7c8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>ACPI: HPET bf7c83bc 00038 (v01 HP     30D8     00000001 HP   00000001)
>ACPI: APIC bf7c83f4 00068 (v01 HP     30D8     00000001 HP   00000001)
>ACPI: MCFG bf7c845c 0003C (v01 HP     30D8     00000001 HP   00000001)
>ACPI: TCPA bf7c8498 00032 (v02 HP     30D8     00000001 HP   00000001)
>ACPI: SSDT bf7db102 00328 (v01 HP       HPQSAT 00000001 MSFT 03000001)
>ACPI: SSDT bf7db42a 0017D (v01 HP       HPQMRM 00000001 MSFT 03000001)
>ACPI: SSDT bf7dbf2b 0025F (v01 HP      Cpu0Tst 00003000 INTL 20060317)
>ACPI: SSDT bf7dc18a 000A6 (v01 HP      Cpu1Tst 00003000 INTL 20060317)
>ACPI: SSDT bf7dc230 004D7 (v01 HP        CpuPm 00003000 INTL 20060317)
>ACPI: Local APIC address 0xfee00000
>4234MB HIGHMEM available.
>885MB LOWMEM available.
>  mapped low ram: 0 - 375fe000
>  low ram: 0 - 375fe000
>Zone ranges:
>  DMA      [mem 0x00010000-0x00ffffff]
>  Normal   [mem 0x01000000-0x375fdfff]
>  HighMem  [mem 0x375fe000-0x3fffffff]
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00010000-0x0009efff]
>  node   0: [mem 0x00100000-0xbf7affff]
>  node   0: [mem 0x00000000-0x3fffffff]
>On node 0 totalpages: 1046335
>free_area_init_node: node 0, pgdat c0c0d140, node_mem_map f3698200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1740 pages used for memmap
>  Normal zone: 220978 pages, LIFO batch:31
>  HighMem zone: 8469 pages used for memmap
>  HighMem zone: 811165 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @f75cf000 s34880 r0 d22464 u57344
>pcpu-alloc: s34880 r0 d22464 u57344 alloc=14*4096
>pcpu-alloc: [0] 0 [0] 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1036094
>Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.3-1.1.fc17.i686.PAE root=UUID=3d91c4c3-b87c-4145-b935-a2df0ba602a1 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=pl2 rd.luks=0 LANG=en_US.UTF-8 rhgb quiet
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>__ex_table already sorted, skipping sort
>Initializing CPU#0
>allocated 10485632 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (000375fe:00140000)
>Memory: 4106016k/5242880k available (5610k kernel code, 79324k reserved, 2726k data, 656k init, 3278536k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
>      .init : 0xc0c25000 - 0xc0cc9000   ( 656 kB)
>      .data : 0xc097a9b5 - 0xc0c24280   (2726 kB)
>      .text : 0xc0400000 - 0xc097a9b5   (5610 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
>NR_IRQS:2304 nr_irqs:512 16
>CPU 0 irqstacks, hard=f7008000 soft=f700a000
>Extended CMOS year: 2000
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>tsc: Fast TSC calibration using PIT
>tsc: Detected 1795.512 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.02 BogoMIPS (lpj=1795512)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring handled by SMI
>process: using mwait in idle threads
>Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>tlb_flushall_shift is 0xffffffff
>ACPI: Core revision 20120711
>ftrace: allocating 22996 entries in 45 pages
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T5670  @ 1.80GHz stepping 0d
>Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>perf_event_intel: PEBS disabled due to CPU errata
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>CPU 1 irqstacks, hard=f70de000 soft=f70ec000
>smpboot: Booting Node   0, Processors  #1 OK
>Initializing CPU#1
>CPU1: Thermal monitoring handled by SMI
>Brought up 2 CPUs
>smpboot: Total of 2 processors activated (7182.04 BogoMIPS)
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0xbf7c5400-0xbf7e7fb7] (142264 bytes)
>reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
>atomic64 test passed for i586+ platform with CX8 and with SSE
>RTC time: 17:29:16, date: 10/23/12
>NET: Registered protocol family 16
>ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: not using MMCONFIG
>PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: SSDT bf7db66f 0023D (v01 HP      Cpu0Ist 00003000 INTL 20060317)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 0023D (v01 HP      Cpu0Ist 00003000 INTL 20060317)
>ACPI: SSDT bf7db931 005FA (v01 HP      Cpu0Cst 00003001 INTL 20060317)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 005FA (v01 HP      Cpu0Cst 00003001 INTL 20060317)
>ACPI: SSDT bf7db5a7 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 000C8 (v01 HP      Cpu1Ist 00003000 INTL 20060317)
>ACPI: SSDT bf7db8ac 00085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
>ACPI: Dynamic OEM Table Load:
>ACPI: SSDT   (null) 00085 (v01 HP      Cpu1Cst 00003000 INTL 20060317)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: Power Resource [C29B] (on)
>ACPI: Power Resource [C1C6] (off)
>ACPI: Power Resource [C3B2] (off)
>ACPI: Power Resource [C3B3] (off)
>ACPI: Power Resource [C3B4] (off)
>ACPI: Power Resource [C3B5] (off)
>ACPI: Power Resource [C3B6] (off)
>ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
>pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0xbf800000-0xfedfffff]
>pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
>pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
>pci 0000:00:00.0: [8086:2a10] type 00 class 0x060000
>pci 0000:00:02.0: [8086:2a12] type 00 class 0x030000
>pci 0000:00:02.0: reg 10: [mem 0xe4400000-0xe44fffff 64bit]
>pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:00:02.0: reg 20: [io  0x4000-0x4007]
>pci 0000:00:02.1: [8086:2a13] type 00 class 0x038000
>pci 0000:00:02.1: reg 10: [mem 0xe4500000-0xe45fffff 64bit]
>pci 0000:00:19.0: [8086:10c4] type 00 class 0x020000
>pci 0000:00:19.0: reg 10: [mem 0xe4600000-0xe461ffff]
>pci 0000:00:19.0: reg 14: [mem 0xe4620000-0xe4620fff]
>pci 0000:00:19.0: reg 18: [io  0x4020-0x403f]
>pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>pci 0000:00:1a.0: reg 20: [io  0x4040-0x405f]
>pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>pci 0000:00:1a.7: reg 10: [mem 0xe4621000-0xe46213ff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>pci 0000:00:1b.0: reg 10: [mem 0xe4624000-0xe4627fff 64bit]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
>pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>pci 0000:00:1d.0: reg 20: [io  0x4060-0x407f]
>pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>pci 0000:00:1d.1: reg 20: [io  0x4080-0x409f]
>pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>pci 0000:00:1d.2: reg 20: [io  0x40a0-0x40bf]
>pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>pci 0000:00:1d.7: reg 10: [mem 0xe4628000-0xe46283ff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
>pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
>pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a
>pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:1f.1: reg 20: [io  0x40c0-0x40cf]
>pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
>pci 0000:00:1f.2: reg 10: [io  0x13f0-0x13f7]
>pci 0000:00:1f.2: reg 14: [io  0x15f4-0x15f7]
>pci 0000:00:1f.2: reg 18: [io  0x1370-0x1377]
>pci 0000:00:1f.2: reg 1c: [io  0x1574-0x1577]
>pci 0000:00:1f.2: reg 20: [io  0x4100-0x411f]
>pci 0000:00:1f.2: reg 24: [mem 0xe4629000-0xe46297ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
>pci 0000:00:1c.0: PCI bridge to [bus 08]
>pci_bus 0000:10: busn_res: [bus 10] is inserted under [bus 00-ff]
>pci 0000:10:00.0: [8086:4229] type 00 class 0x028000
>pci 0000:10:00.0: reg 10: [mem 0xe4000000-0xe4001fff 64bit]
>pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PCI bridge to [bus 10]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
>pci_bus 0000:28: busn_res: [bus 28] is inserted under [bus 00-ff]
>pci 0000:00:1c.4: PCI bridge to [bus 28]
>pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11E._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C135._PRT]
> pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
> pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
>ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C130] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C131] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *5
>ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120711/pci_link-184)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>ACPI: bus type scsi registered
>libata version 3.00 loaded.
>ACPI: bus type usb registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>Expanded resource reserved due to conflict with PCI Bus 0000:00
>e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>e820: reserve RAM buffer [mem 0xbf7b0000-0xbfffffff]
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [mem 0x00000000-0x0009ffff]
>pnp 00:00: [mem 0x000e0000-0x000fffff]
>pnp 00:00: [mem 0x00100000-0xbf7fffff]
>system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp 00:01: [bus 00-ff]
>pnp 00:01: [io  0x0cf8-0x0cff]
>pnp 00:01: [io  0x0000-0x0cf7 window]
>pnp 00:01: [io  0x0d00-0xffff window]
>pnp 00:01: [mem 0x000a0000-0x000bffff window]
>pnp 00:01: [mem 0xbf800000-0xfedfffff window]
>pnp 00:01: [mem 0xfee01000-0xffffffff window]
>pnp 00:01: [mem 0x000d0000-0x000dffff window]
>pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>pnp 00:02: [io  0x00f0-0x00ff]
>pnp 00:02: [irq 13]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x008f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: [dma 4]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [io  0x0061]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:05: [io  0x0070-0x0071]
>pnp 00:05: [io  0x0072-0x0073]
>pnp 00:05: [irq 8]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [mem 0xfed00000-0xfed003ff]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:07: [io  0x0060]
>pnp 00:07: [io  0x0064]
>pnp 00:07: [irq 1]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:08: [irq 12]
>pnp 00:08: Plug and Play ACPI device, IDs SYN013e SYN0100 SYN0002 PNP0f13 (active)
>pnp 00:09: [io  0x0010-0x001f]
>pnp 00:09: [io  0x0024-0x003f]
>pnp 00:09: [io  0x004e-0x004f]
>pnp 00:09: [io  0x0050-0x0053]
>pnp 00:09: [io  0x0063]
>pnp 00:09: [io  0x0065]
>pnp 00:09: [io  0x0067]
>pnp 00:09: [io  0x0074-0x0077]
>pnp 00:09: [io  0x0090-0x009f]
>pnp 00:09: [io  0x00a4-0x00bd]
>pnp 00:09: [io  0x0500-0x057f]
>pnp 00:09: [io  0x0800-0x080f]
>pnp 00:09: [mem 0xffb00000-0xffbfffff]
>pnp 00:09: [mem 0xfff00000-0xffffffff]
>system 00:09: [io  0x0500-0x057f] has been reserved
>system 00:09: [io  0x0800-0x080f] has been reserved
>system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
>system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
>system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0a: [io  0x04d0-0x04d1]
>pnp 00:0a: [io  0x1000-0x107f]
>pnp 00:0a: [io  0x1100-0x113f]
>pnp 00:0a: [io  0x1200-0x121f]
>pnp 00:0a: [mem 0xf8000000-0xfbffffff]
>pnp 00:0a: [mem 0xfec00000-0xfec000ff]
>pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>pnp 00:0a: [mem 0xfed90000-0xfed99fff]
>system 00:0a: [io  0x04d0-0x04d1] has been reserved
>system 00:0a: [io  0x1000-0x107f] has been reserved
>system 00:0a: [io  0x1100-0x113f] has been reserved
>system 00:0a: [io  0x1200-0x121f] has been reserved
>system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0a: [mem 0xfec00000-0xfec000ff] could not be reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0a: [mem 0xfed90000-0xfed99fff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0x000cee00-0x000cffff]
>pnp 00:0b: [mem 0xfeda0000-0xfedbffff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>system 00:0b: [mem 0x000cee00-0x000cffff] has been reserved
>system 00:0b: [mem 0xfeda0000-0xfedbffff] has been reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
>pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
>pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 28] add_size 200000
>pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
>pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
>pci 0000:00:1c.0: PCI bridge to [bus 08]
>pci 0000:00:1c.1: PCI bridge to [bus 10]
>pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe40fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
>pci 0000:00:1c.4: PCI bridge to [bus 28]
>pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:1c.4:   bridge window [mem 0xe0000000-0xe3ffffff]
>pci 0000:00:1c.4:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 02]
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
>pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
>pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
>pci_bus 0000:10: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:10: resource 1 [mem 0xe4000000-0xe40fffff]
>pci_bus 0000:10: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
>pci_bus 0000:28: resource 0 [io  0x2000-0x3fff]
>pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
>pci_bus 0000:28: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
>pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
>pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
>pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP: reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 17072k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>type=2000 audit(1351013355.682:1): initialized
>bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1649
>SELinux:  Registering netfilter hooks
>alg: No test for stdrng (krng)
>NET: Registered protocol family 38
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp: Slot [1] registered
>vesafb: mode is 1024x768x32, linelength=4096, pages=0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>vesafb: framebuffer at 0xd0000000, mapped to 0xf7e80000, using 3072k, total 3072k
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>intel_idle: does not run on family 6 model 15
>ACPI: AC Adapter [C23A] (on-line)
>input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>ACPI: Sleep Button [C2B4]
>input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [C154]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Fan [C3B7] (off)
>ACPI: Fan [C3B8] (off)
>ACPI: Fan [C3B9] (off)
>ACPI: Fan [C3BA] (off)
>ACPI: Fan [C3BB] (off)
>ACPI: Requesting acpi_cpufreq
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>tsc: Marking TSC unstable due to TSC halts in idle
>ACPI: acpi_idle registered with cpuidle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [TZ3] (45 C)
>thermal LNXTHERM:01: registered as thermal_zone1
>ACPI: Thermal Zone [TZ4] (22 C)
>thermal LNXTHERM:02: registered as thermal_zone2
>ACPI: Thermal Zone [TZ5] (48 C)
>thermal LNXTHERM:03: registered as thermal_zone3
>ACPI: Thermal Zone [TZ0] (53 C)
>thermal LNXTHERM:04: registered as thermal_zone4
>ACPI: Thermal Zone [TZ1] (57 C)
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 965GME/GLE Chipset
>agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
>agpgart-intel 0000:00:00.0: detected 8192K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>loop: module loaded
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>ahci 0000:00:1f.2: quirky BIOS, skipping spindown on poweroff
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xe4629000 port 0xe4629100 irq 43
>ata2: DUMMY
>ata3: DUMMY
>ata_piix 0000:00:1f.1: version 2.13
>ata_piix 0000:00:1f.1: setting latency timer to 64
>scsi3 : ata_piix
>scsi4 : ata_piix
>ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
>ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
>ata5: port disabled--ignoring
>libphy: Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4621000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.7
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4628000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.7
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004040
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 3.6.3-1.1.fc17.i686.PAE uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usbcore: registered new interface driver usbserial
>usbcore: registered new interface driver usbserial_generic
>USB Serial support registered for generic
>usbserial: USB Serial Driver core
>i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
>i8042: Detected active multiplexing controller, rev 1.1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>drop_monitor: Initializing network drop monitor service
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP: cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>mip6: Mobile IPv6
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>  Magic number: 0:483:492
>rtc_cmos 00:05: setting system clock to 2012-10-23 17:29:17 UTC (1351013357)
>ACPI: Battery Slot [C23B] (battery present)
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
>ata4.00: configured for MWDMA2
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 00000009, max UDMA/100
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
>ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
>ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 0000 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20L  NC08 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>ACPI: Invalid Power Resource to register!
>ACPI: Invalid Power Resource to register!<6>[    1.119341]  sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 656k freed
>Write protecting the kernel text: 5612k
>Write protecting the kernel read-only data: 2196k
>NX-protecting the kernel data: 4628k
>dracut: dracut-018-105.git20120927.fc17
>dracut: rd.luks=0: removing cryptoluks activation
>dracut: rd.lvm=0: removing LVM activation
>udevd[112]: starting version 182
>[drm] Initialized drm 1.1.0 20060810
>checking generic (d0000000 300000) vs hw (d0000000 10000000)
>fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 44 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>usb 3-1: new full-speed USB device number 2 using uhci_hcd
>usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: HP Integrated Module
>usb 3-1: Manufacturer: Broadcom Corp
>psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 240320
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
>[drm] initialized overlay support
>fbcon: inteldrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 160x50
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20120711/exoparg2-418)
>ACPI Error: Method parse/execution failed [\_SB_.C003.C099._DOD] (Node f70275a0), AE_AML_PACKAGE_LIMIT (20120711/psparse-536)
>ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20120711/video-1149)
>acpi device:01: registered as cooling_device7
>ACPI: Video Device [C099] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>dracut: Starting plymouth daemon
>dracut: rd.dm=0: removing DM RAID activation
>dracut: rd.md=0: removing MD RAID activation
>wmi: Mapper loaded
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Checking ext4: /dev/disk/by-uuid/3d91c4c3-b87c-4145-b935-a2df0ba602a1
>dracut: issuing e2fsck -a  /dev/disk/by-uuid/3d91c4c3-b87c-4145-b935-a2df0ba602a1
>dracut: _Fedora-LiveCD-1: clean, 459817/9609216 files, 7818918/38416896 blocks
>dracut: Remounting /dev/disk/by-uuid/3d91c4c3-b87c-4145-b935-a2df0ba602a1 with -o noatime,nodiratime,ro
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Mounted root filesystem /dev/sda3
>dracut: Switching root
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>type=1404 audit(1351013361.217:2): selinux=0 auid=4294967295 ses=4294967295
>systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>systemd[1]: Set hostname to <Compaq>.
>systemd-readahead-replay[339]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
>systemd-journald[345]: Fixed max_use=201.3M max_size=25.1M min_size=64.0K keep_free=100.6M
>systemd-journald[345]: Vacuuming...
>EXT4-fs (sda3): re-mounted. Opts: (null)
>udevd[349]: starting version 182
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>input: HP WMI hotkeys as /devices/virtual/input/input6
>microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
>microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
>microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>usbcore: registered new interface driver btusb
>cfg80211: Calling CRDA to update world regulatory domain
>ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C003.C004.C0D3 1 (20120711/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>ACPI Warning: 0x00001100-0x0000113f SystemIO conflicts with Region \_SB_.C003.C004.C0E5 1 (20120711/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>lpc_ich: Resource conflict(s) found affecting gpio_ich
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
>e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1f:29:82:e0:21
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 6, PHY: 7, PBA No: FFFFFF-0FF
>snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:d
>iwl4965: Copyright(c) 2003-2011 Intel Corporation
>iwl4965 0000:10:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
>iwl4965 0000:10:00.0: device EEPROM VER=0x36, CALIB=0x5
>iwl4965 0000:10:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
>iwl4965 0000:10:00.0: irq 47 for MSI/MSI-X
>iwl4965 0000:10:00.0: loaded firmware version 228.61.2.24
>Registered led device: phy0-led
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
>Adding 2097148k swap on /dev/sda2.  Priority:0 extents:1 across:2097148k 
>cfg80211: Calling CRDA for country: PL
>cfg80211: Regulatory domain changed to country: PL
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>fuse init (API version 7.20)
>e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>ppdev: user-space parallel port driver
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>wlan0: authenticate with 00:09:5b:f8:bb:c2
>wlan0: send auth to 00:09:5b:f8:bb:c2 (try 1/3)
>wlan0: authenticated
>iwl4965 0000:10:00.0: wlan0: disabling HT due to WEP/TKIP use
>wlan0: associate with 00:09:5b:f8:bb:c2 (try 1/3)
>wlan0: RX AssocResp from 00:09:5b:f8:bb:c2 (capab=0x431 status=0 aid=1)
>wlan0: associated
>IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>sock: process `skype.bin' is using obsolete setsockopt SO_BSDCOMPAT
>iwl4965 0000:10:00.0: Microcode SW error detected.  Restarting 0x82000000.
>iwl4965 0000:10:00.0: Loaded firmware version: 228.61.2.24
>iwl4965 0000:10:00.0: Start IWL Error Log Dump:
>iwl4965 0000:10:00.0: Status: 0x000213E4, count: 5
>iwl4965 0000:10:00.0: Desc                                  Time       data1      data2      line
>iwl4965 0000:10:00.0: FH49_ERROR                   (0x000C) 1550966008 0x00000008 0x03130000 208
>iwl4965 0000:10:00.0: pc      blink1  blink2  ilink1  ilink2  hcmd
>iwl4965 0000:10:00.0: 0x0046C 0x07A10 0x004C2 0x006DE 0x07A2A 0x28D001C
>iwl4965 0000:10:00.0: FH register values:
>iwl4965 0000:10:00.0:       FH49_RSCSR_CHNL0_STTS_WPTR_REG: 0X03148900
>iwl4965 0000:10:00.0:      FH49_RSCSR_CHNL0_RBDCB_BASE_REG: 0X00314be0
>iwl4965 0000:10:00.0:                FH49_RSCSR_CHNL0_WPTR: 0X00000020
>iwl4965 0000:10:00.0:       FH49_MEM_RCSR_CHNL0_CONFIG_REG: 0X00819000
>iwl4965 0000:10:00.0:        FH49_MEM_RSSR_SHARED_CTRL_REG: 0X0000003c
>iwl4965 0000:10:00.0:          FH49_MEM_RSSR_RX_STATUS_REG: 0X03130000
>iwl4965 0000:10:00.0:   FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
>iwl4965 0000:10:00.0:              FH49_TSSR_TX_STATUS_REG: 0X07ff0002
>iwl4965 0000:10:00.0:               FH49_TSSR_TX_ERROR_REG: 0X00000000
>ieee80211 phy0: Hardware restart was requested
>hid-generic 0005:046D:B008.0001: unknown main item tag 0x0
>input: Bluetooth Laser Travel Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/bluetooth/hci0/hci0:11/input7
>hid-generic 0005:046D:B008.0001: input,hidraw0: BLUETOOTH HID v3.14 Mouse [Bluetooth Laser Travel Mouse] on 00:1E:37:B4:04:99

Actions: View

Attachments on bug 869383: 632275 | 632276 | 632279