Attachment 637873 Details for Bug 872901 – File: dmesg

File: dmesg

dmesg (text/plain), 218.16 KB, created by Madison Kelly on 2012-11-04 04:46:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Madison Kelly

Created: 2012-11-04 04:46:04 UTC

Size: 218.16 KB

patch

obsolete

>[10676.910591] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[10676.913814] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[10677.108835] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[10677.191626] ata5: SATA link down (SStatus 0 SControl 300)
>[10677.193686] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[10677.194119] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[10677.194124] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[10677.194786] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[10677.194787] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[10677.194941] ata1.00: configured for UDMA/133
>[10677.195122] sd 0:0:0:0: [sda] Starting disk
>[10677.195631] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[10677.199224] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[10677.201596] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[10677.211990] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[10677.214276] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[10677.217669] ata2.00: configured for UDMA/100
>[10677.427640] firewire_core 0000:02:00.3: rediscovered device fw0
>[10677.581093] PM: resume of devices complete after 705.307 msecs
>[10677.581185] PM: Finishing wakeup.
>[10677.581186] Restarting tasks ... done.
>[10677.581877] video LNXVIDEO:00: Restoring backlight state
>[10677.582097] usb 2-1.5: USB disconnect, device number 3
>[10677.747133] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[10677.759084] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
>[10677.818352] mmc0: new SDHC card at address aaaa
>[10677.818665] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[10677.821082]  mmcblk0: unknown partition table
>[10677.844537] usb 2-1.5: New USB device found, idVendor=04e8, idProduct=685c
>[10677.844543] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[10677.844547] usb 2-1.5: Product: Galaxy Nexus
>[10677.844550] usb 2-1.5: Manufacturer: samsung
>[10677.844553] usb 2-1.5: SerialNumber: 016B75D71700C003
>[10677.847445] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[10677.847681] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[10677.848280] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[10677.855043] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[10677.984220] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10678.078539] usb 1-1.4: new full-speed USB device number 6 using ehci_hcd
>[10678.167395] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[10678.167401] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[10678.167404] usb 1-1.4: Product: BCM20702A0
>[10678.167407] usb 1-1.4: Manufacturer: Broadcom Corp
>[10678.167409] usb 1-1.4: SerialNumber: C01885DB015F
>[10683.042431] wlan0: authenticate with 02:1a:11:f2:54:76
>[10683.065671] wlan0: send auth to 02:1a:11:f2:54:76 (try 1/3)
>[10683.067642] wlan0: authenticated
>[10683.068741] wlan0: associate with 02:1a:11:f2:54:76 (try 1/3)
>[10683.074615] wlan0: RX AssocResp from 02:1a:11:f2:54:76 (capab=0x411 status=0 aid=1)
>[10683.082397] wlan0: associated
>[10683.082440] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[10683.082535] cfg80211: Calling CRDA for country: EU
>[13079.203173] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[17297.744971] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[18894.358365] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[20346.045189] wlan0: deauthenticating from 02:1a:11:f2:54:76 by local choice (reason=3)
>[20346.083953] cfg80211: Calling CRDA to update world regulatory domain
>[20346.085197] cfg80211: World regulatory domain updated:
>[20346.085199] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[20346.085201] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20346.085202] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[20346.085203] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[20346.085204] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20346.085206] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20346.085316] cfg80211: Calling CRDA for country: CA
>[20346.086082] cfg80211: Regulatory domain changed to country: CA
>[20346.086083] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[20346.086084] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[20346.086085] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[20346.086086] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20346.086087] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20346.086088] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[20346.952342] usb 1-1.4: USB disconnect, device number 6
>[20346.990416] PM: Syncing filesystems ... done.
>[20347.029323] PM: Preparing system for mem sleep
>[20347.116564] mmc0: card aaaa removed
>[20347.118518] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[20347.129624] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[20347.140659] PM: Entering mem sleep
>[20347.140724] Suspending console(s) (use no_console_suspend to debug)
>[20347.268819] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[20347.268929] sd 0:0:0:0: [sda] Stopping disk
>[20347.480165] ACPI handle has no context!
>[20347.481525] ACPI handle has no context!
>[20347.492457] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[20347.534003] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[20348.007408] PM: suspend of devices complete after 866.877 msecs
>[20348.007493] PM: late suspend of devices complete after 0.083 msecs
>[20348.018390] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[20348.029246] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[20348.029497] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[20348.040234] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[20348.051292] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[20348.062227] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[20348.062281] PM: noirq suspend of devices complete after 54.798 msecs
>[20348.063008] ACPI: Preparing to enter system sleep state S3
>[20348.112245] PM: Saving platform NVS memory
>[20348.114320] Disabling non-boot CPUs ...
>[20348.115920] smpboot: CPU 1 is now offline
>[20348.116185] CPU 1 offline: Remove Rx thread
>[20348.117471] smpboot: CPU 2 is now offline
>[20348.117795] CPU 2 offline: Remove Rx thread
>[20348.118087] Broke affinity for irq 16
>[20348.118092] Broke affinity for irq 43
>[20348.119106] smpboot: CPU 3 is now offline
>[20348.119296] CPU 3 offline: Remove Rx thread
>[20348.120565] smpboot: CPU 4 is now offline
>[20348.120886] CPU 4 offline: Remove Rx thread
>[20348.121147] Broke affinity for irq 42
>[20348.122164] smpboot: CPU 5 is now offline
>[20348.122584] CPU 5 offline: Remove Rx thread
>[20348.123814] smpboot: CPU 6 is now offline
>[20348.123982] CPU 6 offline: Remove Rx thread
>[20348.125264] smpboot: CPU 7 is now offline
>[20348.125446] CPU 7 offline: Remove Rx thread
>[20348.125581] Extended CMOS year: 2000
>[20348.127701] ACPI: Low-level resume complete
>[20348.127756] PM: Restoring platform NVS memory
>[20348.128293] Extended CMOS year: 2000
>[20348.128396] Enabling non-boot CPUs ...
>[20348.128509] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[20348.164985] bnx2i: CPU 1 online: Create Rx thread
>[20348.165023] CPU1 is up
>[20348.165108] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[20348.198985] bnx2i: CPU 2 online: Create Rx thread
>[20348.199037] CPU2 is up
>[20348.199123] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[20348.228977] bnx2i: CPU 3 online: Create Rx thread
>[20348.229025] CPU3 is up
>[20348.229113] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[20348.263950] bnx2i: CPU 4 online: Create Rx thread
>[20348.263984] CPU4 is up
>[20348.264054] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[20348.296936] bnx2i: CPU 5 online: Create Rx thread
>[20348.296970] CPU5 is up
>[20348.297043] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[20348.321926] bnx2i: CPU 6 online: Create Rx thread
>[20348.321959] CPU6 is up
>[20348.322031] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[20348.346918] bnx2i: CPU 7 online: Create Rx thread
>[20348.346951] CPU7 is up
>[20348.364020] ACPI: Waking up from system sleep state S3
>[20348.410029] thinkpad_acpi: EC reports that Thermal Table has changed
>[20348.478896] i915 0000:00:02.0: power state changed by ACPI to D0
>[20348.489843] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[20348.500900] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[20348.533870] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[20348.544870] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[20348.556182] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[20348.566863] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[20348.588943] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[20348.611066] PM: noirq resume of devices complete after 132.278 msecs
>[20348.611175] PM: early resume of devices complete after 0.073 msecs
>[20348.611243] i915 0000:00:02.0: setting latency timer to 64
>[20348.611276] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[20348.611337] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[20348.611360] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[20348.611400] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[20348.611416] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[20348.611426] ahci 0000:00:1f.2: setting latency timer to 64
>[20348.611629] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[20348.611672] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[20348.653795] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[20348.705196] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[20348.843939] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[20348.928738] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[20348.928767] ata5: SATA link down (SStatus 0 SControl 300)
>[20348.931411] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[20348.932043] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[20348.932047] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20348.932799] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[20348.932827] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[20348.932830] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[20348.932983] ata1.00: configured for UDMA/133
>[20348.933186] sd 0:0:0:0: [sda] Starting disk
>[20348.934726] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[20348.945207] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[20348.947467] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[20348.950912] ata2.00: configured for UDMA/100
>[20348.959307] Extended CMOS year: 2000
>[20349.164700] firewire_core 0000:02:00.3: rediscovered device fw0
>[20349.372926] PM: resume of devices complete after 761.990 msecs
>[20349.373020] PM: Finishing wakeup.
>[20349.373335] usb 2-1.5: USB disconnect, device number 4
>[20349.373021] Restarting tasks ... done.
>[20349.374003] video LNXVIDEO:00: Restoring backlight state
>[20349.537051] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[20349.600410] mmc0: new SDHC card at address aaaa
>[20349.600754] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[20349.603224]  mmcblk0: unknown partition table
>[20349.637487] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[20349.637706] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[20349.638442] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[20349.645175] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[20349.796532] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[20349.815625] usb 1-1.4: new full-speed USB device number 7 using ehci_hcd
>[20349.904491] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[20349.904497] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[20349.904501] usb 1-1.4: Product: BCM20702A0
>[20349.904504] usb 1-1.4: Manufacturer: Broadcom Corp
>[20349.904506] usb 1-1.4: SerialNumber: C01885DB015F
>[20365.917359] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
>[20365.924304] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[20366.016552] usb 1-1.4: USB disconnect, device number 7
>[21995.254754] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[23783.051892] CPU0: Package power limit notification (total events = 1)
>[23783.051893] CPU6: Package power limit notification (total events = 1)
>[23783.051894] CPU1: Package power limit notification (total events = 1)
>[23783.051895] CPU7: Package power limit notification (total events = 1)
>[23783.051897] CPU3: Package power limit notification (total events = 1)
>[23783.051898] CPU2: Package power limit notification (total events = 1)
>[23783.051899] CPU5: Package power limit notification (total events = 1)
>[23783.051900] CPU4: Package power limit notification (total events = 1)
>[23783.062894] CPU0: Package power limit normal
>[23783.062896] CPU4: Package power limit normal
>[23783.062897] CPU7: Package power limit normal
>[23783.062898] CPU5: Package power limit normal
>[23783.062898] CPU1: Package power limit normal
>[23783.062899] CPU6: Package power limit normal
>[23783.062915] CPU3: Package power limit normal
>[23783.062915] CPU2: Package power limit normal
>[24532.190199] CPU6: Package power limit notification (total events = 2)
>[24532.190201] CPU1: Package power limit notification (total events = 2)
>[24532.190202] CPU4: Package power limit notification (total events = 2)
>[24532.190204] CPU5: Package power limit notification (total events = 2)
>[24532.190205] CPU3: Package power limit notification (total events = 2)
>[24532.190206] CPU7: Package power limit notification (total events = 2)
>[24532.190207] CPU0: Package power limit notification (total events = 2)
>[24532.190208] CPU2: Package power limit notification (total events = 2)
>[24532.191865] CPU7: Package power limit normal
>[24532.191867] CPU0: Package power limit normal
>[24532.191868] CPU3: Package power limit normal
>[24532.191869] CPU4: Package power limit normal
>[24532.191870] CPU5: Package power limit normal
>[24532.191871] CPU2: Package power limit normal
>[24532.191872] CPU1: Package power limit normal
>[24532.191895] CPU6: Package power limit normal
>[25750.639334] CPU5: Package power limit notification (total events = 7)
>[25750.639336] CPU1: Package power limit notification (total events = 7)
>[25750.639338] CPU6: Package power limit notification (total events = 7)
>[25750.639340] CPU2: Package power limit notification (total events = 7)
>[25750.639341] CPU3: Package power limit notification (total events = 7)
>[25750.639342] CPU0: Package power limit notification (total events = 7)
>[25750.639343] CPU7: Package power limit notification (total events = 7)
>[25750.639344] CPU4: Package power limit notification (total events = 7)
>[25750.641168] CPU7: Package power limit normal
>[25750.641170] CPU4: Package power limit normal
>[25750.641170] CPU5: Package power limit normal
>[25750.641171] CPU6: Package power limit normal
>[25750.641172] CPU0: Package power limit normal
>[25750.641173] CPU1: Package power limit normal
>[25750.641184] CPU3: Package power limit normal
>[25750.641185] CPU2: Package power limit normal
>[26428.502704] CPU4: Package power limit notification (total events = 25)
>[26428.502706] CPU2: Package power limit notification (total events = 25)
>[26428.502708] CPU7: Package power limit notification (total events = 25)
>[26428.502709] CPU5: Package power limit notification (total events = 25)
>[26428.502711] CPU0: Package power limit notification (total events = 25)
>[26428.502712] CPU6: Package power limit notification (total events = 25)
>[26428.502713] CPU1: Package power limit notification (total events = 25)
>[26428.502714] CPU3: Package power limit notification (total events = 25)
>[26428.504106] CPU4: Package power limit normal
>[26428.504107] CPU0: Package power limit normal
>[26428.504108] CPU7: Package power limit normal
>[26428.504109] CPU5: Package power limit normal
>[26428.504110] CPU2: Package power limit normal
>[26428.504111] CPU6: Package power limit normal
>[26428.504112] CPU1: Package power limit normal
>[26428.504113] CPU3: Package power limit normal
>[30220.261740] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[30999.005085] CPU0: Package power limit notification (total events = 32)
>[30999.005087] CPU2: Package power limit notification (total events = 32)
>[30999.005089] CPU4: Package power limit notification (total events = 32)
>[30999.005090] CPU1: Package power limit notification (total events = 32)
>[30999.005091] CPU5: Package power limit notification (total events = 32)
>[30999.005092] CPU3: Package power limit notification (total events = 32)
>[30999.005094] CPU6: Package power limit notification (total events = 32)
>[30999.005095] CPU7: Package power limit notification (total events = 32)
>[30999.007188] CPU2: Package power limit normal
>[30999.007189] CPU5: Package power limit normal
>[30999.007191] CPU6: Package power limit normal
>[30999.007192] CPU4: Package power limit normal
>[30999.007192] CPU3: Package power limit normal
>[30999.007193] CPU7: Package power limit normal
>[30999.007202] CPU1: Package power limit normal
>[30999.007203] CPU0: Package power limit normal
>[32141.901734] PM: Syncing filesystems ... done.
>[32141.931586] PM: Preparing system for mem sleep
>[32142.018751] mmc0: card aaaa removed
>[32142.020693] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[32142.031878] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[32142.042880] PM: Entering mem sleep
>[32142.042958] Suspending console(s) (use no_console_suspend to debug)
>[32142.172687] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32142.172774] sd 0:0:0:0: [sda] Stopping disk
>[32142.395082] ACPI handle has no context!
>[32142.396709] ACPI handle has no context!
>[32142.406599] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[32142.448840] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[32142.914642] PM: suspend of devices complete after 871.871 msecs
>[32142.914729] PM: late suspend of devices complete after 0.086 msecs
>[32142.925557] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[32142.936418] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[32142.936670] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[32142.947412] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[32142.958468] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[32142.969405] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[32142.969454] PM: noirq suspend of devices complete after 54.739 msecs
>[32142.970176] ACPI: Preparing to enter system sleep state S3
>[32143.017425] PM: Saving platform NVS memory
>[32143.019446] Disabling non-boot CPUs ...
>[32143.020727] smpboot: CPU 1 is now offline
>[32143.021108] CPU 1 offline: Remove Rx thread
>[32143.022393] smpboot: CPU 2 is now offline
>[32143.022725] CPU 2 offline: Remove Rx thread
>[32143.023017] Broke affinity for irq 16
>[32143.024034] smpboot: CPU 3 is now offline
>[32143.024234] CPU 3 offline: Remove Rx thread
>[32143.025530] smpboot: CPU 4 is now offline
>[32143.025714] CPU 4 offline: Remove Rx thread
>[32143.025998] Broke affinity for irq 43
>[32143.027019] smpboot: CPU 5 is now offline
>[32143.027186] CPU 5 offline: Remove Rx thread
>[32143.028435] smpboot: CPU 6 is now offline
>[32143.028634] CPU 6 offline: Remove Rx thread
>[32143.028866] Broke affinity for irq 42
>[32143.029886] smpboot: CPU 7 is now offline
>[32143.030055] CPU 7 offline: Remove Rx thread
>[32143.030153] Extended CMOS year: 2000
>[32143.032275] ACPI: Low-level resume complete
>[32143.032329] PM: Restoring platform NVS memory
>[32143.032874] Extended CMOS year: 2000
>[32143.032976] Enabling non-boot CPUs ...
>[32143.033076] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32143.065164] bnx2i: CPU 1 online: Create Rx thread
>[32143.065207] CPU1 is up
>[32143.065265] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[32143.097161] bnx2i: CPU 2 online: Create Rx thread
>[32143.097178] CPU2 is up
>[32143.097211] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[32143.128154] bnx2i: CPU 3 online: Create Rx thread
>[32143.128174] CPU3 is up
>[32143.128210] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[32143.159137] bnx2i: CPU 4 online: Create Rx thread
>[32143.159153] CPU4 is up
>[32143.159188] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[32143.190132] bnx2i: CPU 5 online: Create Rx thread
>[32143.190146] CPU5 is up
>[32143.190177] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[32143.221121] bnx2i: CPU 6 online: Create Rx thread
>[32143.221136] CPU6 is up
>[32143.221169] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[32143.252112] bnx2i: CPU 7 online: Create Rx thread
>[32143.252127] CPU7 is up
>[32143.259701] ACPI: Waking up from system sleep state S3
>[32143.309157] thinkpad_acpi: EC reports that Thermal Table has changed
>[32143.378087] i915 0000:00:02.0: power state changed by ACPI to D0
>[32143.389033] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[32143.400082] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[32143.433062] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[32143.444070] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[32143.455212] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[32143.466063] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[32143.488171] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[32143.510199] PM: noirq resume of devices complete after 132.222 msecs
>[32143.510245] PM: early resume of devices complete after 0.026 msecs
>[32143.510274] i915 0000:00:02.0: setting latency timer to 64
>[32143.510284] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[32143.510305] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[32143.510339] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[32143.510416] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[32143.510417] ahci 0000:00:1f.2: setting latency timer to 64
>[32143.510485] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
>[32143.510495] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[32143.510538] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[32143.510556] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32143.546525] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[32143.549037] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[32143.743162] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[32143.778859] mei 0000:00:16.0: unexpected reset.
>[32143.815936] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[32143.818286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[32143.818675] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32143.818679] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32143.819247] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32143.819250] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32143.819404] ata1.00: configured for UDMA/133
>[32143.819518] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[32143.819519] sd 0:0:0:0: [sda] Starting disk
>[32143.819876] ata5: SATA link down (SStatus 0 SControl 300)
>[32143.821830] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[32143.832291] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[32143.834576] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[32143.837932] ata2.00: configured for UDMA/100
>[32143.846539] Extended CMOS year: 2000
>[32144.061902] firewire_core 0000:02:00.3: rediscovered device fw0
>[32144.153365] PM: resume of devices complete after 643.322 msecs
>[32144.153459] PM: Finishing wakeup.
>[32144.153460] Restarting tasks ... done.
>[32144.155456] video LNXVIDEO:00: Restoring backlight state
>[32144.317066] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32144.390812] mmc0: new SDHC card at address aaaa
>[32144.390953] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[32144.393250]  mmcblk0: unknown partition table
>[32144.417721] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32144.417958] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[32147.551439] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[32147.551488] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[32463.020355] PM: Syncing filesystems ... done.
>[32463.050653] PM: Preparing system for mem sleep
>[32463.133344] mmc0: card aaaa removed
>[32463.135306] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[32463.146396] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[32463.157491] PM: Entering mem sleep
>[32463.157574] Suspending console(s) (use no_console_suspend to debug)
>[32463.289852] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32463.289979] sd 0:0:0:0: [sda] Stopping disk
>[32463.504526] ACPI handle has no context!
>[32463.506310] ACPI handle has no context!
>[32463.516188] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[32463.556603] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[32464.033173] PM: suspend of devices complete after 875.814 msecs
>[32464.033253] PM: late suspend of devices complete after 0.079 msecs
>[32464.044148] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[32464.055009] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[32464.055261] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[32464.065997] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[32464.077053] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[32464.087991] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[32464.088045] PM: noirq suspend of devices complete after 54.806 msecs
>[32464.088774] ACPI: Preparing to enter system sleep state S3
>[32464.138006] PM: Saving platform NVS memory
>[32464.139555] Disabling non-boot CPUs ...
>[32464.140890] smpboot: CPU 1 is now offline
>[32464.141252] CPU 1 offline: Remove Rx thread
>[32464.142548] smpboot: CPU 2 is now offline
>[32464.142877] CPU 2 offline: Remove Rx thread
>[32464.143167] Broke affinity for irq 16
>[32464.143171] Broke affinity for irq 42
>[32464.144190] smpboot: CPU 3 is now offline
>[32464.144369] CPU 3 offline: Remove Rx thread
>[32464.145636] smpboot: CPU 4 is now offline
>[32464.145970] CPU 4 offline: Remove Rx thread
>[32464.146226] Broke affinity for irq 43
>[32464.147242] smpboot: CPU 5 is now offline
>[32464.147390] CPU 5 offline: Remove Rx thread
>[32464.148620] smpboot: CPU 6 is now offline
>[32464.148932] CPU 6 offline: Remove Rx thread
>[32464.150169] smpboot: CPU 7 is now offline
>[32464.150336] CPU 7 offline: Remove Rx thread
>[32464.150428] Extended CMOS year: 2000
>[32464.152548] ACPI: Low-level resume complete
>[32464.152604] PM: Restoring platform NVS memory
>[32464.153146] Extended CMOS year: 2000
>[32464.153246] Enabling non-boot CPUs ...
>[32464.153360] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32464.189749] bnx2i: CPU 1 online: Create Rx thread
>[32464.189789] CPU1 is up
>[32464.189873] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[32464.215734] bnx2i: CPU 2 online: Create Rx thread
>[32464.215774] CPU2 is up
>[32464.215862] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[32464.245732] bnx2i: CPU 3 online: Create Rx thread
>[32464.245780] CPU3 is up
>[32464.245865] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[32464.278712] bnx2i: CPU 4 online: Create Rx thread
>[32464.278746] CPU4 is up
>[32464.278819] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[32464.311701] bnx2i: CPU 5 online: Create Rx thread
>[32464.311735] CPU5 is up
>[32464.311806] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[32464.336688] bnx2i: CPU 6 online: Create Rx thread
>[32464.336722] CPU6 is up
>[32464.336797] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[32464.361681] bnx2i: CPU 7 online: Create Rx thread
>[32464.361715] CPU7 is up
>[32464.378879] ACPI: Waking up from system sleep state S3
>[32464.424790] thinkpad_acpi: EC reports that Thermal Table has changed
>[32464.493655] i915 0000:00:02.0: power state changed by ACPI to D0
>[32464.504602] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[32464.515656] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[32464.548623] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[32464.559627] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[32464.570936] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[32464.581619] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[32464.603684] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[32464.625819] PM: noirq resume of devices complete after 132.275 msecs
>[32464.625928] PM: early resume of devices complete after 0.073 msecs
>[32464.625989] i915 0000:00:02.0: setting latency timer to 64
>[32464.626018] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[32464.626075] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[32464.626100] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[32464.626140] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[32464.626156] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[32464.626171] ahci 0000:00:1f.2: setting latency timer to 64
>[32464.626338] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
>[32464.626370] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[32464.626413] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32464.667540] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[32464.720851] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[32464.858653] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[32464.931483] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[32464.932117] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32464.932121] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32464.933020] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32464.933024] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32464.933231] ata1.00: configured for UDMA/133
>[32464.933434] sd 0:0:0:0: [sda] Starting disk
>[32464.934445] ata5: SATA link down (SStatus 0 SControl 300)
>[32464.936448] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[32464.940131] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[32464.942430] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[32464.952825] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[32464.955085] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[32464.958476] ata2.00: configured for UDMA/100
>[32465.179435] firewire_core 0000:02:00.3: rediscovered device fw0
>[32465.334854] PM: resume of devices complete after 709.169 msecs
>[32465.334947] PM: Finishing wakeup.
>[32465.334948] Restarting tasks ... done.
>[32465.335784] video LNXVIDEO:00: Restoring backlight state
>[32465.502567] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32465.563497] mmc0: new SDHC card at address aaaa
>[32465.563799] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[32465.566208]  mmcblk0: unknown partition table
>[32465.603345] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[32465.603576] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[32522.686712] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
>[32522.686718] thinkpad_acpi: unhandled HKEY event 0x6040
>[32522.686720] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>[32522.687248] thinkpad_acpi: EC reports that Thermal Table has changed
>[32526.640975] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[32526.643229] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[32526.647520] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[32526.807434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[32526.993087] usb 1-1.4: new full-speed USB device number 8 using ehci_hcd
>[32527.081820] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[32527.081826] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[32527.081829] usb 1-1.4: Product: BCM20702A0
>[32527.081851] usb 1-1.4: Manufacturer: Broadcom Corp
>[32527.081854] usb 1-1.4: SerialNumber: C01885DB015F
>[33366.178191] gnome-shell[1418]: segfault at 40 ip 0000003aab83a51a sp 00007fffcb54a870 error 4 in libgnome-shell.so[3aab800000+98000]
>[33396.852794] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[33396.852847] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[34526.854416] e1000e: em1 NIC Link is Down
>[34603.085294] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[34603.091997] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[34603.236607] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[34609.260657] wlan0: authenticate with 02:1a:11:f3:52:f6
>[34609.297810] wlan0: send auth to 02:1a:11:f3:52:f6 (try 1/3)
>[34609.299787] wlan0: authenticated
>[34609.300384] wlan0: associate with 02:1a:11:f3:52:f6 (try 1/3)
>[34609.304161] wlan0: RX AssocResp from 02:1a:11:f3:52:f6 (capab=0x411 status=0 aid=1)
>[34609.307348] wlan0: associated
>[34609.307398] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[34609.307496] cfg80211: Calling CRDA for country: CA
>[34609.310136] cfg80211: Regulatory domain changed to country: CA
>[34609.310140] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34609.310143] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[34609.310146] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[34609.310148] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34609.310150] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34609.310152] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[34618.980046] usb 2-1.5: new high-speed USB device number 5 using ehci_hcd
>[34619.063294] usb 2-1.5: New USB device found, idVendor=04e8, idProduct=685c
>[34619.063301] usb 2-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>[34619.063305] usb 2-1.5: Product: Galaxy Nexus
>[34619.063307] usb 2-1.5: Manufacturer: samsung
>[34619.063310] usb 2-1.5: SerialNumber: 016B75D71700C003
>[40000.608715] wlan0: deauthenticating from 02:1a:11:f3:52:f6 by local choice (reason=3)
>[40000.647188] cfg80211: Calling CRDA to update world regulatory domain
>[40000.677691] cfg80211: World regulatory domain updated:
>[40000.677694] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[40000.677696] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[40000.677697] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[40000.677698] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[40000.677700] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[40000.677701] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[40000.677884] cfg80211: Calling CRDA for country: CA
>[40000.679505] cfg80211: Regulatory domain changed to country: CA
>[40000.679510] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[40000.679512] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[40000.679515] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[40000.679517] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[40000.679519] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[40000.679521] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[40001.559811] PM: Syncing filesystems ... done.
>[40001.590214] PM: Preparing system for mem sleep
>[40001.635677] usb 1-1.4: USB disconnect, device number 8
>[40001.702745] mmc0: card aaaa removed
>[40001.704722] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[40001.715839] Freezing remaining freezable tasks ... (elapsed 0.03 seconds) done.
>[40001.748914] PM: Entering mem sleep
>[40001.749004] Suspending console(s) (use no_console_suspend to debug)
>[40001.881468] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[40001.881560] sd 0:0:0:0: [sda] Stopping disk
>[40002.105174] ACPI handle has no context!
>[40002.107743] ACPI handle has no context!
>[40002.116610] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[40002.158820] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[40002.630548] PM: suspend of devices complete after 881.726 msecs
>[40002.630647] PM: late suspend of devices complete after 0.097 msecs
>[40002.641575] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[40002.652429] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[40002.652680] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[40002.663423] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[40002.674481] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[40002.685416] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[40002.685465] PM: noirq suspend of devices complete after 54.831 msecs
>[40002.686189] ACPI: Preparing to enter system sleep state S3
>[40002.735434] PM: Saving platform NVS memory
>[40002.737033] Disabling non-boot CPUs ...
>[40002.738364] smpboot: CPU 1 is now offline
>[40002.738753] CPU 1 offline: Remove Rx thread
>[40002.740041] smpboot: CPU 2 is now offline
>[40002.740365] CPU 2 offline: Remove Rx thread
>[40002.740642] Broke affinity for irq 16
>[40002.740647] Broke affinity for irq 43
>[40002.741660] smpboot: CPU 3 is now offline
>[40002.741843] CPU 3 offline: Remove Rx thread
>[40002.743098] smpboot: CPU 4 is now offline
>[40002.743426] CPU 4 offline: Remove Rx thread
>[40002.743664] Broke affinity for irq 42
>[40002.744696] smpboot: CPU 5 is now offline
>[40002.744901] CPU 5 offline: Remove Rx thread
>[40002.746168] smpboot: CPU 6 is now offline
>[40002.746328] CPU 6 offline: Remove Rx thread
>[40002.747611] smpboot: CPU 7 is now offline
>[40002.747803] CPU 7 offline: Remove Rx thread
>[40002.747942] Extended CMOS year: 2000
>[40002.750059] ACPI: Low-level resume complete
>[40002.750113] PM: Restoring platform NVS memory
>[40002.750656] Extended CMOS year: 2000
>[40002.750758] Enabling non-boot CPUs ...
>[40002.750882] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[40002.782157] bnx2i: CPU 1 online: Create Rx thread
>[40002.782198] CPU1 is up
>[40002.782258] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[40002.814147] bnx2i: CPU 2 online: Create Rx thread
>[40002.814189] CPU2 is up
>[40002.814250] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[40002.846150] bnx2i: CPU 3 online: Create Rx thread
>[40002.846165] CPU3 is up
>[40002.846197] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[40002.877135] bnx2i: CPU 4 online: Create Rx thread
>[40002.877148] CPU4 is up
>[40002.877178] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[40002.908117] bnx2i: CPU 5 online: Create Rx thread
>[40002.908140] CPU5 is up
>[40002.908171] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[40002.939108] bnx2i: CPU 6 online: Create Rx thread
>[40002.939131] CPU6 is up
>[40002.939163] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[40002.970099] bnx2i: CPU 7 online: Create Rx thread
>[40002.970122] CPU7 is up
>[40002.977723] ACPI: Waking up from system sleep state S3
>[40003.083099] i915 0000:00:02.0: power state changed by ACPI to D0
>[40003.094048] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[40003.105103] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[40003.138084] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[40003.149082] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[40003.160225] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[40003.171072] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[40003.193164] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[40003.215212] PM: noirq resume of devices complete after 132.220 msecs
>[40003.215270] PM: early resume of devices complete after 0.033 msecs
>[40003.215294] i915 0000:00:02.0: setting latency timer to 64
>[40003.215307] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[40003.215333] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[40003.215367] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[40003.215407] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[40003.215415] ahci 0000:00:1f.2: setting latency timer to 64
>[40003.215421] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[40003.215530] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[40003.215560] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[40003.251423] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[40003.258072] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[40003.448091] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[40003.532866] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[40003.532889] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[40003.533238] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[40003.533239] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[40003.533831] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[40003.533835] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[40003.534245] ata1.00: configured for UDMA/133
>[40003.534407] sd 0:0:0:0: [sda] Starting disk
>[40003.534972] ata5: SATA link down (SStatus 0 SControl 300)
>[40003.536482] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[40003.538754] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[40003.549248] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[40003.551512] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[40003.554907] ata2.00: configured for UDMA/100
>[40003.766883] firewire_core 0000:02:00.3: rediscovered device fw0
>[40003.842322] PM: resume of devices complete after 627.250 msecs
>[40003.842414] PM: Finishing wakeup.
>[40003.842415] Restarting tasks ... done.
>[40003.843288] usb 2-1.5: USB disconnect, device number 5
>[40003.843298] video LNXVIDEO:00: Restoring backlight state
>[40004.008872] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[40004.079011] mmc0: new SDHC card at address aaaa
>[40004.079290] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[40004.081867]  mmcblk0: unknown partition table
>[40004.109740] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[40004.109978] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[40004.110778] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[40004.118263] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[40004.264855] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[40004.417817] usb 1-1.4: new full-speed USB device number 9 using ehci_hcd
>[40004.506649] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[40004.506655] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[40004.506659] usb 1-1.4: Product: BCM20702A0
>[40004.506661] usb 1-1.4: Manufacturer: Broadcom Corp
>[40004.506664] usb 1-1.4: SerialNumber: C01885DB015F
>[40006.981501] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[40006.981547] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[40011.129616] wlan0: authenticate with 00:1c:10:f5:47:57
>[40011.169094] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[40011.171006] wlan0: authenticated
>[40011.171969] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[40011.175315] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=1)
>[40011.178382] wlan0: associated
>[40011.178430] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[40201.430790] hid-generic 0005:1532:0014.0001: unknown main item tag 0x0
>[40201.431020] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input13
>[40201.431464] hid-generic 0005:1532:0014.0001: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[51537.389876] usb 1-1.4: USB disconnect, device number 9
>[51537.408697] PM: Syncing filesystems ... done.
>[51537.451153] PM: Preparing system for mem sleep
>[51537.676609] mmc0: card aaaa removed
>[51537.678440] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[51537.689632] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[51537.700633] PM: Entering mem sleep
>[51537.700714] Suspending console(s) (use no_console_suspend to debug)
>[51537.831794] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[51537.831934] sd 0:0:0:0: [sda] Stopping disk
>[51538.040839] ACPI handle has no context!
>[51538.042453] ACPI handle has no context!
>[51538.052354] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[51538.094572] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[51538.573354] PM: suspend of devices complete after 872.830 msecs
>[51538.573441] PM: late suspend of devices complete after 0.085 msecs
>[51538.584305] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[51538.595159] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[51538.595411] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[51538.606153] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[51538.617207] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[51538.628145] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[51538.628193] PM: noirq suspend of devices complete after 54.768 msecs
>[51538.628914] ACPI: Preparing to enter system sleep state S3
>[51538.678163] PM: Saving platform NVS memory
>[51538.679976] Disabling non-boot CPUs ...
>[51538.681300] smpboot: CPU 1 is now offline
>[51538.681676] CPU 1 offline: Remove Rx thread
>[51538.682958] smpboot: CPU 2 is now offline
>[51538.683147] CPU 2 offline: Remove Rx thread
>[51538.683427] Broke affinity for irq 43
>[51538.684445] smpboot: CPU 3 is now offline
>[51538.684637] CPU 3 offline: Remove Rx thread
>[51538.685935] smpboot: CPU 4 is now offline
>[51538.686282] CPU 4 offline: Remove Rx thread
>[51538.687512] smpboot: CPU 5 is now offline
>[51538.687669] CPU 5 offline: Remove Rx thread
>[51538.688913] smpboot: CPU 6 is now offline
>[51538.689227] CPU 6 offline: Remove Rx thread
>[51538.689435] Broke affinity for irq 16
>[51538.689439] Broke affinity for irq 42
>[51538.690454] smpboot: CPU 7 is now offline
>[51538.690615] CPU 7 offline: Remove Rx thread
>[51538.690708] Extended CMOS year: 2000
>[51538.692828] ACPI: Low-level resume complete
>[51538.692883] PM: Restoring platform NVS memory
>[51538.693427] Extended CMOS year: 2000
>[51538.693528] Enabling non-boot CPUs ...
>[51538.693626] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[51538.724888] bnx2i: CPU 1 online: Create Rx thread
>[51538.724931] CPU1 is up
>[51538.724989] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[51538.756891] bnx2i: CPU 2 online: Create Rx thread
>[51538.756908] CPU2 is up
>[51538.756940] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[51538.787879] bnx2i: CPU 3 online: Create Rx thread
>[51538.787894] CPU3 is up
>[51538.787927] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[51538.818866] bnx2i: CPU 4 online: Create Rx thread
>[51538.818879] CPU4 is up
>[51538.818908] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[51538.849848] bnx2i: CPU 5 online: Create Rx thread
>[51538.849872] CPU5 is up
>[51538.849901] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[51538.880839] bnx2i: CPU 6 online: Create Rx thread
>[51538.880863] CPU6 is up
>[51538.880893] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[51538.911847] bnx2i: CPU 7 online: Create Rx thread
>[51538.911873] CPU7 is up
>[51538.919459] ACPI: Waking up from system sleep state S3
>[51539.024827] i915 0000:00:02.0: power state changed by ACPI to D0
>[51539.035770] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[51539.046827] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[51539.079802] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[51539.090810] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[51539.101952] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[51539.112793] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[51539.134911] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[51539.156931] PM: noirq resume of devices complete after 132.217 msecs
>[51539.156979] PM: early resume of devices complete after 0.026 msecs
>[51539.157007] i915 0000:00:02.0: setting latency timer to 64
>[51539.157017] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[51539.157054] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[51539.157105] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[51539.157106] ahci 0000:00:1f.2: setting latency timer to 64
>[51539.157107] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[51539.157112] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[51539.157275] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[51539.157291] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[51539.192881] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[51539.193746] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[51539.388797] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[51539.472673] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[51539.474918] ata5: SATA link down (SStatus 0 SControl 300)
>[51539.476345] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[51539.476627] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[51539.477040] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[51539.477044] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[51539.477732] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[51539.477736] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[51539.477889] ata1.00: configured for UDMA/133
>[51539.478043] sd 0:0:0:0: [sda] Starting disk
>[51539.478591] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[51539.489045] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[51539.491357] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[51539.494810] ata2.00: configured for UDMA/100
>[51539.503290] Extended CMOS year: 2000
>[51539.708630] firewire_core 0000:02:00.3: rediscovered device fw0
>[51539.782986] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[51539.789705] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[51539.907229] PM: resume of devices complete after 750.487 msecs
>[51539.907340] PM: Finishing wakeup.
>[51539.907340] Restarting tasks ... done.
>[51539.908112] video LNXVIDEO:00: Restoring backlight state
>[51539.923473] wlan0: deauthenticating from 00:1c:10:f5:47:57 by local choice (reason=3)
>[51539.972664] cfg80211: Calling CRDA to update world regulatory domain
>[51539.973721] cfg80211: World regulatory domain updated:
>[51539.973723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[51539.973725] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[51539.973726] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[51539.973727] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[51539.973728] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[51539.973729] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[51539.973738] cfg80211: Calling CRDA for country: CA
>[51539.975988] cfg80211: Regulatory domain changed to country: CA
>[51539.975992] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[51539.975995] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[51539.975997] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[51539.975999] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[51539.976002] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[51539.976004] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[51540.131600] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[51540.144494] mmc0: new SDHC card at address aaaa
>[51540.144782] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[51540.147261]  mmcblk0: unknown partition table
>[51540.232481] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[51540.232724] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[51540.233584] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[51540.240939] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[51540.364498] usb 1-1.4: new full-speed USB device number 10 using ehci_hcd
>[51540.389769] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[51540.453837] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[51540.453840] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[51540.453841] usb 1-1.4: Product: BCM20702A0
>[51540.453842] usb 1-1.4: Manufacturer: Broadcom Corp
>[51540.453843] usb 1-1.4: SerialNumber: C01885DB015F
>[51543.175106] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[51543.175165] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[51547.307763] wlan0: authenticate with 00:1c:10:f5:47:57
>[51547.337839] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[51547.339819] wlan0: authenticated
>[51547.341117] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[51547.344503] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=1)
>[51547.347574] wlan0: associated
>[51547.347621] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[51729.812746] hid-generic 0005:1532:0014.0002: unknown main item tag 0x0
>[51729.812971] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input14
>[51729.813482] hid-generic 0005:1532:0014.0002: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[57236.525943] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[57785.875114] wlan0: deauthenticating from 00:1c:10:f5:47:57 by local choice (reason=3)
>[57785.905327] cfg80211: Calling CRDA to update world regulatory domain
>[57785.949569] cfg80211: World regulatory domain updated:
>[57785.949572] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[57785.949574] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57785.949575] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[57785.949577] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[57785.949578] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57785.949579] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57785.949588] cfg80211: Calling CRDA for country: CA
>[57785.951124] cfg80211: Regulatory domain changed to country: CA
>[57785.951125] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[57785.951126] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[57785.951127] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[57785.951128] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57785.951129] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57785.951130] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[57786.601160] usb 1-1.4: USB disconnect, device number 10
>[57786.573682] PM: Syncing filesystems ... done.
>[57786.609480] PM: Preparing system for mem sleep
>[57786.719794] mmc0: card aaaa removed
>[57786.721757] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[57786.732884] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[57786.743960] PM: Entering mem sleep
>[57786.744036] Suspending console(s) (use no_console_suspend to debug)
>[57786.874029] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[57786.874188] sd 0:0:0:0: [sda] Stopping disk
>[57787.095989] ACPI handle has no context!
>[57787.097775] ACPI handle has no context!
>[57787.107645] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[57787.149947] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[57787.619599] PM: suspend of devices complete after 875.754 msecs
>[57787.619668] PM: late suspend of devices complete after 0.067 msecs
>[57787.630623] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[57787.641478] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[57787.641726] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[57787.652472] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[57787.663526] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[57787.674464] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[57787.674511] PM: noirq suspend of devices complete after 54.858 msecs
>[57787.675239] ACPI: Preparing to enter system sleep state S3
>[57787.724484] PM: Saving platform NVS memory
>[57787.726230] Disabling non-boot CPUs ...
>[57787.727849] smpboot: CPU 1 is now offline
>[57787.728085] CPU 1 offline: Remove Rx thread
>[57787.729365] smpboot: CPU 2 is now offline
>[57787.729710] CPU 2 offline: Remove Rx thread
>[57787.729953] Broke affinity for irq 42
>[57787.729955] Broke affinity for irq 43
>[57787.730969] smpboot: CPU 3 is now offline
>[57787.731122] CPU 3 offline: Remove Rx thread
>[57787.732367] smpboot: CPU 4 is now offline
>[57787.732700] CPU 4 offline: Remove Rx thread
>[57787.732964] Broke affinity for irq 16
>[57787.733988] smpboot: CPU 5 is now offline
>[57787.734171] CPU 5 offline: Remove Rx thread
>[57787.735410] smpboot: CPU 6 is now offline
>[57787.735727] CPU 6 offline: Remove Rx thread
>[57787.736959] smpboot: CPU 7 is now offline
>[57787.737120] CPU 7 offline: Remove Rx thread
>[57787.737195] Extended CMOS year: 2000
>[57787.739329] ACPI: Low-level resume complete
>[57787.739387] PM: Restoring platform NVS memory
>[57787.739936] Extended CMOS year: 2000
>[57787.740041] Enabling non-boot CPUs ...
>[57787.740155] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[57787.777252] bnx2i: CPU 1 online: Create Rx thread
>[57787.777289] CPU1 is up
>[57787.777372] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[57787.811255] bnx2i: CPU 2 online: Create Rx thread
>[57787.811305] CPU2 is up
>[57787.811392] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[57787.841234] bnx2i: CPU 3 online: Create Rx thread
>[57787.841281] CPU3 is up
>[57787.841367] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[57787.874215] bnx2i: CPU 4 online: Create Rx thread
>[57787.874250] CPU4 is up
>[57787.874325] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[57787.907207] bnx2i: CPU 5 online: Create Rx thread
>[57787.907240] CPU5 is up
>[57787.907313] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[57787.932193] bnx2i: CPU 6 online: Create Rx thread
>[57787.932227] CPU6 is up
>[57787.932301] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[57787.957185] bnx2i: CPU 7 online: Create Rx thread
>[57787.957218] CPU7 is up
>[57787.974380] ACPI: Waking up from system sleep state S3
>[57788.020301] thinkpad_acpi: EC reports that Thermal Table has changed
>[57788.089161] i915 0000:00:02.0: power state changed by ACPI to D0
>[57788.100110] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[57788.111168] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[57788.144136] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[57788.155146] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[57788.166452] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[57788.177130] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[57788.199205] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[57788.221333] PM: noirq resume of devices complete after 132.279 msecs
>[57788.221442] PM: early resume of devices complete after 0.073 msecs
>[57788.221506] i915 0000:00:02.0: setting latency timer to 64
>[57788.221540] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[57788.221614] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[57788.221675] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[57788.221688] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[57788.221691] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[57788.221721] ahci 0000:00:1f.2: setting latency timer to 64
>[57788.221858] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[57788.221930] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[57788.268126] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[57788.315905] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[57788.454103] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[57788.529014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[57788.529042] ata5: SATA link down (SStatus 0 SControl 300)
>[57788.529637] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[57788.529641] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[57788.530515] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[57788.530519] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[57788.530677] ata1.00: configured for UDMA/133
>[57788.530790] sd 0:0:0:0: [sda] Starting disk
>[57788.530961] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[57788.534664] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[57788.536950] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[57788.547258] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[57788.549587] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[57788.552938] ata2.00: configured for UDMA/100
>[57788.772967] firewire_core 0000:02:00.3: rediscovered device fw0
>[57788.917444] PM: resume of devices complete after 696.221 msecs
>[57788.917529] PM: Finishing wakeup.
>[57788.917530] Restarting tasks ... done.
>[57788.918544] video LNXVIDEO:00: Restoring backlight state
>[57789.083926] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[57789.154715] mmc0: new SDHC card at address aaaa
>[57789.155002] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[57789.157510]  mmcblk0: unknown partition table
>[57789.184884] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[57789.185168] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[57789.187216] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[57789.194119] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[57789.318925] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[57789.424855] usb 1-1.4: new full-speed USB device number 11 using ehci_hcd
>[57789.513690] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[57789.513696] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[57789.513699] usb 1-1.4: Product: BCM20702A0
>[57789.513702] usb 1-1.4: Manufacturer: Broadcom Corp
>[57789.513704] usb 1-1.4: SerialNumber: C01885DB015F
>[57795.333238] wlan0: authenticate with 02:1a:11:f8:b9:48
>[57795.369731] wlan0: send auth to 02:1a:11:f8:b9:48 (try 1/3)
>[57795.371668] wlan0: authenticated
>[57795.372744] wlan0: associate with 02:1a:11:f8:b9:48 (try 1/3)
>[57795.377346] wlan0: RX AssocResp from 02:1a:11:f8:b9:48 (capab=0x411 status=0 aid=1)
>[57795.380220] wlan0: associated
>[57795.380268] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[57795.380372] cfg80211: Calling CRDA for country: CA
>[57795.382722] cfg80211: Regulatory domain changed to country: CA
>[57795.382726] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[57795.382729] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[57795.382750] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[57795.382753] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57795.382755] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57795.382757] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[59720.931639] wlan0: deauthenticating from 02:1a:11:f8:b9:48 by local choice (reason=3)
>[59720.966696] cfg80211: Calling CRDA to update world regulatory domain
>[59720.967732] cfg80211: World regulatory domain updated:
>[59720.967735] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59720.967736] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59720.967738] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59720.967739] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59720.967740] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59720.967741] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59720.967936] cfg80211: Calling CRDA for country: CA
>[59720.968928] cfg80211: Regulatory domain changed to country: CA
>[59720.968930] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59720.968932] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[59720.968933] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[59720.968934] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59720.968935] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59720.968937] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[59721.874658] PM: Syncing filesystems ... done.
>[59721.920337] PM: Preparing system for mem sleep
>[59721.931213] usb 1-1.4: USB disconnect, device number 11
>[59722.022303] mmc0: card aaaa removed
>[59722.024252] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[59722.035343] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[59722.046446] PM: Entering mem sleep
>[59722.046517] Suspending console(s) (use no_console_suspend to debug)
>[59722.170957] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[59722.171022] sd 0:0:0:0: [sda] Stopping disk
>[59722.393542] ACPI handle has no context!
>[59722.395263] ACPI handle has no context!
>[59722.405143] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[59722.447463] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[59722.918139] PM: suspend of devices complete after 871.815 msecs
>[59722.918225] PM: late suspend of devices complete after 0.084 msecs
>[59722.929113] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[59722.939968] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[59722.940225] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[59722.950962] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[59722.962017] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[59722.972956] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[59722.973004] PM: noirq suspend of devices complete after 54.791 msecs
>[59722.973729] ACPI: Preparing to enter system sleep state S3
>[59723.020974] PM: Saving platform NVS memory
>[59723.022692] Disabling non-boot CPUs ...
>[59723.024030] smpboot: CPU 1 is now offline
>[59723.024405] CPU 1 offline: Remove Rx thread
>[59723.025687] smpboot: CPU 2 is now offline
>[59723.026008] CPU 2 offline: Remove Rx thread
>[59723.026303] Broke affinity for irq 42
>[59723.026305] Broke affinity for irq 43
>[59723.027319] smpboot: CPU 3 is now offline
>[59723.027494] CPU 3 offline: Remove Rx thread
>[59723.028756] smpboot: CPU 4 is now offline
>[59723.029097] CPU 4 offline: Remove Rx thread
>[59723.029312] Broke affinity for irq 16
>[59723.030361] smpboot: CPU 5 is now offline
>[59723.030644] CPU 5 offline: Remove Rx thread
>[59723.032131] smpboot: CPU 6 is now offline
>[59723.032337] CPU 6 offline: Remove Rx thread
>[59723.033534] smpboot: CPU 7 is now offline
>[59723.033673] CPU 7 offline: Remove Rx thread
>[59723.033739] Extended CMOS year: 2000
>[59723.035878] ACPI: Low-level resume complete
>[59723.035935] PM: Restoring platform NVS memory
>[59723.036480] Extended CMOS year: 2000
>[59723.036582] Enabling non-boot CPUs ...
>[59723.036752] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[59723.073746] bnx2i: CPU 1 online: Create Rx thread
>[59723.073784] CPU1 is up
>[59723.073868] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[59723.107743] bnx2i: CPU 2 online: Create Rx thread
>[59723.107795] CPU2 is up
>[59723.107879] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[59723.137726] bnx2i: CPU 3 online: Create Rx thread
>[59723.137774] CPU3 is up
>[59723.137863] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[59723.170710] bnx2i: CPU 4 online: Create Rx thread
>[59723.170744] CPU4 is up
>[59723.170819] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[59723.203695] bnx2i: CPU 5 online: Create Rx thread
>[59723.203729] CPU5 is up
>[59723.203803] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[59723.228686] bnx2i: CPU 6 online: Create Rx thread
>[59723.228719] CPU6 is up
>[59723.228793] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[59723.253678] bnx2i: CPU 7 online: Create Rx thread
>[59723.253712] CPU7 is up
>[59723.270856] ACPI: Waking up from system sleep state S3
>[59723.372657] i915 0000:00:02.0: power state changed by ACPI to D0
>[59723.383604] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[59723.394661] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[59723.427633] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[59723.438632] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[59723.449938] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[59723.460624] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[59723.482691] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[59723.504800] PM: noirq resume of devices complete after 132.251 msecs
>[59723.504910] PM: early resume of devices complete after 0.073 msecs
>[59723.504972] i915 0000:00:02.0: setting latency timer to 64
>[59723.504999] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[59723.505053] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[59723.505075] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[59723.505113] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[59723.505149] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[59723.505183] ahci 0000:00:1f.2: setting latency timer to 64
>[59723.505339] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[59723.505383] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[59723.540570] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[59723.598918] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[59723.737729] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[59723.810500] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[59723.811139] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[59723.811143] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[59723.812012] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[59723.812016] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[59723.812172] ata1.00: configured for UDMA/133
>[59723.812374] sd 0:0:0:0: [sda] Starting disk
>[59723.812454] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[59723.815457] ata5: SATA link down (SStatus 0 SControl 300)
>[59723.816083] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[59723.818416] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[59723.828879] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[59723.831192] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[59723.834582] ata2.00: configured for UDMA/100
>[59724.056501] firewire_core 0000:02:00.3: rediscovered device fw0
>[59724.250934] PM: resume of devices complete after 746.262 msecs
>[59724.251026] PM: Finishing wakeup.
>[59724.251026] Restarting tasks ... done.
>[59724.252463] video LNXVIDEO:00: Restoring backlight state
>[59724.425043] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[59724.489025] mmc0: new SDHC card at address aaaa
>[59724.489190] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[59724.491477]  mmcblk0: unknown partition table
>[59724.525282] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[59724.525526] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[59724.526158] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[59724.533334] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[59724.661692] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[59724.708273] usb 1-1.4: new full-speed USB device number 12 using ehci_hcd
>[59724.797287] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[59724.797293] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[59724.797297] usb 1-1.4: Product: BCM20702A0
>[59724.797300] usb 1-1.4: Manufacturer: Broadcom Corp
>[59724.797302] usb 1-1.4: SerialNumber: C01885DB015F
>[59727.435998] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[59727.436056] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[59730.638937] wlan0: authenticate with 02:1a:11:f8:b9:48
>[59730.673020] wlan0: send auth to 02:1a:11:f8:b9:48 (try 1/3)
>[59730.674996] wlan0: authenticated
>[59730.675740] wlan0: associate with 02:1a:11:f8:b9:48 (try 1/3)
>[59730.681808] wlan0: RX AssocResp from 02:1a:11:f8:b9:48 (capab=0x411 status=0 aid=1)
>[59730.685924] wlan0: associated
>[59730.685972] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[59730.686096] cfg80211: Calling CRDA for country: CA
>[59730.688792] cfg80211: Regulatory domain changed to country: CA
>[59730.688793] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59730.688794] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[59730.688795] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[59730.688796] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59730.688797] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59730.688798] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[59774.355581] usb 1-1.2: new high-speed USB device number 13 using ehci_hcd
>[59774.455361] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1402
>[59774.455368] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[59774.455372] usb 1-1.2: Product: Apple USB Ethernet Adapter
>[59774.455375] usb 1-1.2: Manufacturer: Apple Inc.      
>[59774.455377] usb 1-1.2: SerialNumber: 146950
>[59774.775451] asix 1-1.2:1.0: eth0: register 'asix' at usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet, 28:37:37:01:f1:d8
>[59774.775535] usbcore: registered new interface driver asix
>[59775.616248] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[59777.515680] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[59777.517756] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[59812.113296] wlan0: deauthenticated from 02:1a:11:f8:b9:48 (Reason: 2)
>[59812.149888] cfg80211: Calling CRDA to update world regulatory domain
>[59812.152848] cfg80211: World regulatory domain updated:
>[59812.152853] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59812.152856] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59812.152858] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59812.152860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59812.152863] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59812.152865] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59812.153091] cfg80211: Calling CRDA for country: CA
>[59812.155433] cfg80211: Regulatory domain changed to country: CA
>[59812.155437] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59812.155440] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[59812.155443] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[59812.155445] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59812.155447] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59812.155450] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[59815.101404] wlan0: authenticate with 02:1a:11:f8:b9:48
>[59815.113517] wlan0: send auth to 02:1a:11:f8:b9:48 (try 1/3)
>[59815.313704] wlan0: send auth to 02:1a:11:f8:b9:48 (try 2/3)
>[59815.514537] wlan0: send auth to 02:1a:11:f8:b9:48 (try 3/3)
>[59815.715318] wlan0: authentication with 02:1a:11:f8:b9:48 timed out
>[59844.125208] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
>[59844.125214] thinkpad_acpi: unhandled HKEY event 0x6040
>[59844.125217] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>[59844.125703] thinkpad_acpi: EC reports that Thermal Table has changed
>[59879.579728] hid-generic 0005:1532:0014.0003: unknown main item tag 0x0
>[59879.579888] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input15
>[59879.580203] hid-generic 0005:1532:0014.0003: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[61896.854113] usb 2-1.5: new low-speed USB device number 6 using ehci_hcd
>[61896.946608] usb 2-1.5: New USB device found, idVendor=0c2e, idProduct=0200
>[61896.946615] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[61896.946619] usb 2-1.5: Product: Metrologic Scanner
>[61896.946621] usb 2-1.5: Manufacturer: Metrologic
>[61896.952206] input: Metrologic Metrologic Scanner as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input16
>[61896.952467] hid-generic 0003:0C2E:0200.0004: input,hidraw1: USB HID v1.11 Keyboard [Metrologic Metrologic Scanner] on usb-0000:00:1d.0-1.5/input0
>[76994.824078] usb 1-1.4: USB disconnect, device number 12
>[76994.803350] PM: Syncing filesystems ... done.
>[76994.839000] PM: Preparing system for mem sleep
>[76994.960123] mmc0: card aaaa removed
>[76994.962081] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[76994.973265] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[76994.984238] PM: Entering mem sleep
>[76994.984308] Suspending console(s) (use no_console_suspend to debug)
>[76995.113629] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[76995.113730] sd 0:0:0:0: [sda] Stopping disk
>[76995.324652] ACPI handle has no context!
>[76995.326089] ACPI handle has no context!
>[76995.335980] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[76995.378799] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[76995.857930] PM: suspend of devices complete after 873.807 msecs
>[76995.858029] PM: late suspend of devices complete after 0.098 msecs
>[76995.868945] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[76995.879822] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[76995.880075] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[76995.890822] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[76995.901880] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[76995.912790] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[76995.912841] PM: noirq suspend of devices complete after 54.826 msecs
>[76995.913567] ACPI: Preparing to enter system sleep state S3
>[76995.962802] PM: Saving platform NVS memory
>[76995.964903] Disabling non-boot CPUs ...
>[76995.966214] smpboot: CPU 1 is now offline
>[76995.966599] CPU 1 offline: Remove Rx thread
>[76995.967899] smpboot: CPU 2 is now offline
>[76995.968069] CPU 2 offline: Remove Rx thread
>[76995.968388] Broke affinity for irq 43
>[76995.969404] smpboot: CPU 3 is now offline
>[76995.969581] CPU 3 offline: Remove Rx thread
>[76995.970861] smpboot: CPU 4 is now offline
>[76995.971053] CPU 4 offline: Remove Rx thread
>[76995.972341] smpboot: CPU 5 is now offline
>[76995.972509] CPU 5 offline: Remove Rx thread
>[76995.973781] smpboot: CPU 6 is now offline
>[76995.973971] CPU 6 offline: Remove Rx thread
>[76995.974212] Broke affinity for irq 16
>[76995.974216] Broke affinity for irq 42
>[76995.975234] smpboot: CPU 7 is now offline
>[76995.975430] CPU 7 offline: Remove Rx thread
>[76995.975567] Extended CMOS year: 2000
>[76995.977684] ACPI: Low-level resume complete
>[76995.977740] PM: Restoring platform NVS memory
>[76995.978287] Extended CMOS year: 2000
>[76995.978386] Enabling non-boot CPUs ...
>[76995.978516] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[76996.015548] bnx2i: CPU 1 online: Create Rx thread
>[76996.015587] CPU1 is up
>[76996.015671] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[76996.049551] bnx2i: CPU 2 online: Create Rx thread
>[76996.049602] CPU2 is up
>[76996.049690] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[76996.079533] bnx2i: CPU 3 online: Create Rx thread
>[76996.079579] CPU3 is up
>[76996.079664] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[76996.112514] bnx2i: CPU 4 online: Create Rx thread
>[76996.112551] CPU4 is up
>[76996.112624] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[76996.145504] bnx2i: CPU 5 online: Create Rx thread
>[76996.145538] CPU5 is up
>[76996.145610] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[76996.170494] bnx2i: CPU 6 online: Create Rx thread
>[76996.170528] CPU6 is up
>[76996.170602] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[76996.195486] bnx2i: CPU 7 online: Create Rx thread
>[76996.195522] CPU7 is up
>[76996.212643] ACPI: Waking up from system sleep state S3
>[76996.258601] thinkpad_acpi: EC reports that Thermal Table has changed
>[76996.327460] i915 0000:00:02.0: power state changed by ACPI to D0
>[76996.338408] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[76996.349463] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[76996.382443] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[76996.393438] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[76996.404751] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[76996.415429] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[76996.437507] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[76996.459638] PM: noirq resume of devices complete after 132.285 msecs
>[76996.459750] PM: early resume of devices complete after 0.075 msecs
>[76996.459812] i915 0000:00:02.0: setting latency timer to 64
>[76996.459846] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[76996.459914] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[76996.459937] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[76996.459957] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[76996.460026] ahci 0000:00:1f.2: setting latency timer to 64
>[76996.460028] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[76996.460269] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[76996.460287] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[76996.506379] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[76996.556484] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[76996.692398] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[76996.777301] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[76996.777328] ata5: SATA link down (SStatus 0 SControl 300)
>[76996.779929] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[76996.780548] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[76996.780552] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[76996.781280] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[76996.781308] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[76996.781311] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[76996.781465] ata1.00: configured for UDMA/133
>[76996.781605] sd 0:0:0:0: [sda] Starting disk
>[76996.783201] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[76996.793701] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[76996.795951] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[76996.799300] ata2.00: configured for UDMA/100
>[76996.807918] Extended CMOS year: 2000
>[76997.013258] firewire_core 0000:02:00.3: rediscovered device fw0
>[76997.220676] PM: resume of devices complete after 761.166 msecs
>[76997.220768] PM: Finishing wakeup.
>[76997.221520] usb 1-1.2: USB disconnect, device number 13
>[76997.221572] asix 1-1.2:1.0: eth0: unregister 'asix' usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet
>[76997.220769] Restarting tasks ... done.
>[76997.221790] video LNXVIDEO:00: Restoring backlight state
>[76997.234443] usb 2-1.5: USB disconnect, device number 6
>[76997.381202] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[76997.458247] mmc0: new SDHC card at address aaaa
>[76997.459059] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[76997.461513]  mmcblk0: unknown partition table
>[76997.482056] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[76997.482254] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[76997.663137] usb 1-1.4: new full-speed USB device number 14 using ehci_hcd
>[76997.752117] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[76997.752123] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[76997.752126] usb 1-1.4: Product: BCM20702A0
>[76997.752129] usb 1-1.4: Manufacturer: Broadcom Corp
>[76997.752132] usb 1-1.4: SerialNumber: C01885DB015F
>[77175.601802] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[77175.608489] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[77175.782183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[77181.986509] wlan0: authenticate with 02:1a:11:f0:24:36
>[77181.993879] wlan0: send auth to 02:1a:11:f0:24:36 (try 1/3)
>[77181.995770] wlan0: authenticated
>[77181.996263] wlan0: associate with 02:1a:11:f0:24:36 (try 1/3)
>[77182.000290] wlan0: RX AssocResp from 02:1a:11:f0:24:36 (capab=0x411 status=0 aid=1)
>[77182.003174] wlan0: associated
>[77182.003218] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[77182.003332] cfg80211: Calling CRDA for country: CA
>[77182.005890] cfg80211: Regulatory domain changed to country: CA
>[77182.005894] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77182.005897] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[77182.005900] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[77182.005902] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77182.005905] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77182.005907] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[77269.553820] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
>[77269.553939] wlan0: deauthenticating from 02:1a:11:f0:24:36 by local choice (reason=3)
>[77269.554380] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.554391] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.554394] wlan0: HW problem - can not stop rx aggregation for tid 0
>[77269.554410] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.554412] wlan0: HW problem - can not stop rx aggregation for tid 4
>[77269.571366] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.571374] wlan0: failed to remove key (0, 02:1a:11:f0:24:36) from hardware (-5)
>[77269.587462] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.587475] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.587483] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.587537] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.587577] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.587584] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.602363] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.602371] wlan0: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-5)
>[77269.602622] cfg80211: Calling CRDA to update world regulatory domain
>[77269.618352] iwlwifi 0000:03:00.0: Not sending command - RF KILL
>[77269.620221] cfg80211: World regulatory domain updated:
>[77269.620226] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77269.620230] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77269.620233] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[77269.620237] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[77269.620241] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77269.620244] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77269.620580] cfg80211: Calling CRDA for country: CA
>[77269.623856] cfg80211: Regulatory domain changed to country: CA
>[77269.623862] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[77269.623866] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[77269.623870] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[77269.623873] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77269.623877] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[77269.623880] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[77269.781710] usb 1-1.4: USB disconnect, device number 14
>[77413.970385] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
>[77413.972897] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[77413.976927] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[77414.133819] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[77414.295475] usb 1-1.4: new full-speed USB device number 15 using ehci_hcd
>[77414.383983] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[77414.383987] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[77414.383989] usb 1-1.4: Product: BCM20702A0
>[77414.383991] usb 1-1.4: Manufacturer: Broadcom Corp
>[77414.383992] usb 1-1.4: SerialNumber: C01885DB015F
>[77420.299702] wlan0: authenticate with 02:1a:11:f1:cc:b2
>[77420.317210] wlan0: send auth to 02:1a:11:f1:cc:b2 (try 1/3)
>[77420.319536] wlan0: authenticated
>[77420.319766] wlan0: waiting for beacon from 02:1a:11:f1:cc:b2
>[77420.408345] wlan0: associate with 02:1a:11:f1:cc:b2 (try 1/3)
>[77420.412132] wlan0: RX AssocResp from 02:1a:11:f1:cc:b2 (capab=0x411 status=0 aid=1)
>[77420.417246] wlan0: associated
>[77420.417336] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[77420.417500] cfg80211: Calling CRDA for country: EU
>[77715.650595] CPU7: Package power limit notification (total events = 43)
>[77715.650597] CPU4: Package power limit notification (total events = 43)
>[77715.650599] CPU2: Package power limit notification (total events = 43)
>[77715.650600] CPU6: Package power limit notification (total events = 43)
>[77715.650601] CPU3: Package power limit notification (total events = 43)
>[77715.650603] CPU0: Package power limit notification (total events = 43)
>[77715.650604] CPU1: Package power limit notification (total events = 43)
>[77715.650605] CPU5: Package power limit notification (total events = 43)
>[77715.652443] CPU0: Package power limit normal
>[77715.652444] CPU5: Package power limit normal
>[77715.652445] CPU4: Package power limit normal
>[77715.652447] CPU2: Package power limit normal
>[77715.652447] CPU1: Package power limit normal
>[77715.652449] CPU6: Package power limit normal
>[77715.652449] CPU7: Package power limit normal
>[77715.652450] CPU3: Package power limit normal
>[78432.044577] wlan0: deauthenticating from 02:1a:11:f1:cc:b2 by local choice (reason=3)
>[78432.081363] cfg80211: Calling CRDA to update world regulatory domain
>[78432.082555] cfg80211: World regulatory domain updated:
>[78432.082557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[78432.082558] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[78432.082559] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[78432.082560] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[78432.082561] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[78432.082561] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[78432.082569] cfg80211: Calling CRDA for country: CA
>[78432.084119] cfg80211: Regulatory domain changed to country: CA
>[78432.084120] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[78432.084121] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[78432.084122] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[78432.084123] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[78432.084124] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[78432.084124] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[78432.923679] usb 1-1.4: USB disconnect, device number 15
>[78432.999160] PM: Syncing filesystems ... done.
>[78433.034856] PM: Preparing system for mem sleep
>[78433.117001] mmc0: card aaaa removed
>[78433.118944] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[78433.130060] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[78433.141141] PM: Entering mem sleep
>[78433.141224] Suspending console(s) (use no_console_suspend to debug)
>[78433.273642] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[78433.273737] sd 0:0:0:0: [sda] Stopping disk
>[78433.495307] ACPI handle has no context!
>[78433.496939] ACPI handle has no context!
>[78433.506837] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[78433.548995] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[78434.018753] PM: suspend of devices complete after 877.747 msecs
>[78434.018839] PM: late suspend of devices complete after 0.085 msecs
>[78434.029775] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[78434.040632] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[78434.040882] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[78434.051628] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[78434.062681] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[78434.073617] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[78434.073665] PM: noirq suspend of devices complete after 54.842 msecs
>[78434.074386] ACPI: Preparing to enter system sleep state S3
>[78434.121633] PM: Saving platform NVS memory
>[78434.123316] Disabling non-boot CPUs ...
>[78434.124622] smpboot: CPU 1 is now offline
>[78434.124982] CPU 1 offline: Remove Rx thread
>[78434.126249] smpboot: CPU 2 is now offline
>[78434.126571] CPU 2 offline: Remove Rx thread
>[78434.126873] Broke affinity for irq 43
>[78434.127885] smpboot: CPU 3 is now offline
>[78434.128071] CPU 3 offline: Remove Rx thread
>[78434.129362] smpboot: CPU 4 is now offline
>[78434.129686] CPU 4 offline: Remove Rx thread
>[78434.129954] Broke affinity for irq 42
>[78434.130974] smpboot: CPU 5 is now offline
>[78434.131128] CPU 5 offline: Remove Rx thread
>[78434.132375] smpboot: CPU 6 is now offline
>[78434.132687] CPU 6 offline: Remove Rx thread
>[78434.132892] Broke affinity for irq 16
>[78434.133911] smpboot: CPU 7 is now offline
>[78434.134075] CPU 7 offline: Remove Rx thread
>[78434.134176] Extended CMOS year: 2000
>[78434.136300] ACPI: Low-level resume complete
>[78434.136355] PM: Restoring platform NVS memory
>[78434.136911] Extended CMOS year: 2000
>[78434.137014] Enabling non-boot CPUs ...
>[78434.137113] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[78434.169387] bnx2i: CPU 1 online: Create Rx thread
>[78434.169431] CPU1 is up
>[78434.169489] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[78434.201378] bnx2i: CPU 2 online: Create Rx thread
>[78434.201416] CPU2 is up
>[78434.201479] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[78434.233371] bnx2i: CPU 3 online: Create Rx thread
>[78434.233387] CPU3 is up
>[78434.233419] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[78434.264357] bnx2i: CPU 4 online: Create Rx thread
>[78434.264370] CPU4 is up
>[78434.264399] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[78434.295348] bnx2i: CPU 5 online: Create Rx thread
>[78434.295361] CPU5 is up
>[78434.295391] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[78434.327336] bnx2i: CPU 6 online: Create Rx thread
>[78434.327349] CPU6 is up
>[78434.327378] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[78434.358324] bnx2i: CPU 7 online: Create Rx thread
>[78434.358338] CPU7 is up
>[78434.365947] ACPI: Waking up from system sleep state S3
>[78434.415362] thinkpad_acpi: EC reports that Thermal Table has changed
>[78434.484297] i915 0000:00:02.0: power state changed by ACPI to D0
>[78434.495241] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[78434.506295] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[78434.539270] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[78434.550267] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[78434.561419] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[78434.572269] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[78434.594353] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[78434.616391] PM: noirq resume of devices complete after 132.211 msecs
>[78434.616437] PM: early resume of devices complete after 0.026 msecs
>[78434.616460] i915 0000:00:02.0: setting latency timer to 64
>[78434.616470] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[78434.616500] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[78434.616553] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[78434.616558] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[78434.616562] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[78434.616597] ahci 0000:00:1f.2: setting latency timer to 64
>[78434.616686] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[78434.616710] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[78434.654022] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[78434.659258] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[78434.849241] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[78434.932129] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[78434.932525] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[78434.932527] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[78434.933233] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[78434.933235] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[78434.933373] ata1.00: configured for UDMA/133
>[78434.933507] sd 0:0:0:0: [sda] Starting disk
>[78434.934054] ata5: SATA link down (SStatus 0 SControl 300)
>[78434.936085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[78434.939747] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[78434.942107] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[78434.952541] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[78434.954853] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[78434.958257] ata2.00: configured for UDMA/100
>[78435.168002] firewire_core 0000:02:00.3: rediscovered device fw0
>[78435.232535] PM: resume of devices complete after 616.314 msecs
>[78435.232627] PM: Finishing wakeup.
>[78435.232628] Restarting tasks ... done.
>[78435.233519] video LNXVIDEO:00: Restoring backlight state
>[78435.402292] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[78435.459012] mmc0: new SDHC card at address aaaa
>[78435.459335] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[78435.461739]  mmcblk0: unknown partition table
>[78435.502981] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[78435.503228] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[78435.504336] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[78435.511528] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[78435.563001] usb 1-1.4: new full-speed USB device number 16 using ehci_hcd
>[78435.651775] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[78435.651798] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[78435.651801] usb 1-1.4: Product: BCM20702A0
>[78435.651804] usb 1-1.4: Manufacturer: Broadcom Corp
>[78435.651807] usb 1-1.4: SerialNumber: C01885DB015F
>[78435.660298] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[78438.387523] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[78438.387579] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[78442.553433] wlan0: authenticate with 00:1c:10:f5:47:57
>[78442.589957] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[78442.591866] wlan0: authenticated
>[78442.592093] wlan0: waiting for beacon from 00:1c:10:f5:47:57
>[78442.621279] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[78442.624660] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=5)
>[78442.627762] wlan0: associated
>[78442.627824] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[78701.884436] hid-generic 0005:1532:0014.0005: unknown main item tag 0x0
>[78701.884660] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input17
>[78701.885207] hid-generic 0005:1532:0014.0005: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[81236.686034] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[106134.547119] usb 1-1.4: USB disconnect, device number 16
>[106134.567513] PM: Syncing filesystems ... done.
>[106134.603066] PM: Preparing system for mem sleep
>[106134.845750] mmc0: card aaaa removed
>[106134.847603] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[106134.858802] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[106134.869807] PM: Entering mem sleep
>[106134.869889] Suspending console(s) (use no_console_suspend to debug)
>[106135.006224] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[106135.006334] sd 0:0:0:0: [sda] Stopping disk
>[106135.214940] ACPI handle has no context!
>[106135.216707] ACPI handle has no context!
>[106135.226488] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[106135.268447] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[106135.751443] PM: suspend of devices complete after 881.744 msecs
>[106135.751540] PM: late suspend of devices complete after 0.095 msecs
>[106135.762453] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[106135.773311] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[106135.773564] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[106135.784305] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[106135.795362] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[106135.806298] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[106135.806346] PM: noirq suspend of devices complete after 54.820 msecs
>[106135.807068] ACPI: Preparing to enter system sleep state S3
>[106135.856317] PM: Saving platform NVS memory
>[106135.858329] Disabling non-boot CPUs ...
>[106135.859631] smpboot: CPU 1 is now offline
>[106135.859991] CPU 1 offline: Remove Rx thread
>[106135.861284] smpboot: CPU 2 is now offline
>[106135.861608] CPU 2 offline: Remove Rx thread
>[106135.861883] Broke affinity for irq 43
>[106135.862896] smpboot: CPU 3 is now offline
>[106135.863053] CPU 3 offline: Remove Rx thread
>[106135.864294] smpboot: CPU 4 is now offline
>[106135.864619] CPU 4 offline: Remove Rx thread
>[106135.865894] smpboot: CPU 5 is now offline
>[106135.866102] CPU 5 offline: Remove Rx thread
>[106135.867380] smpboot: CPU 6 is now offline
>[106135.867562] CPU 6 offline: Remove Rx thread
>[106135.867798] Broke affinity for irq 16
>[106135.867802] Broke affinity for irq 42
>[106135.868820] smpboot: CPU 7 is now offline
>[106135.869003] CPU 7 offline: Remove Rx thread
>[106135.869138] Extended CMOS year: 2000
>[106135.871255] ACPI: Low-level resume complete
>[106135.871311] PM: Restoring platform NVS memory
>[106135.871864] Extended CMOS year: 2000
>[106135.871966] Enabling non-boot CPUs ...
>[106135.872072] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[106135.904048] bnx2i: CPU 1 online: Create Rx thread
>[106135.904090] CPU1 is up
>[106135.904148] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[106135.936050] bnx2i: CPU 2 online: Create Rx thread
>[106135.936067] CPU2 is up
>[106135.936098] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[106135.967040] bnx2i: CPU 3 online: Create Rx thread
>[106135.967056] CPU3 is up
>[106135.967088] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[106135.998028] bnx2i: CPU 4 online: Create Rx thread
>[106135.998041] CPU4 is up
>[106135.998071] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[106136.029027] bnx2i: CPU 5 online: Create Rx thread
>[106136.029054] CPU5 is up
>[106136.029088] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[106136.060999] bnx2i: CPU 6 online: Create Rx thread
>[106136.061023] CPU6 is up
>[106136.061053] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[106136.091989] bnx2i: CPU 7 online: Create Rx thread
>[106136.092013] CPU7 is up
>[106136.099599] ACPI: Waking up from system sleep state S3
>[106136.204987] i915 0000:00:02.0: power state changed by ACPI to D0
>[106136.215932] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[106136.226987] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[106136.259973] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[106136.270971] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[106136.282114] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[106136.292963] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[106136.315045] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[106136.337090] PM: noirq resume of devices complete after 132.215 msecs
>[106136.337137] PM: early resume of devices complete after 0.026 msecs
>[106136.337166] i915 0000:00:02.0: setting latency timer to 64
>[106136.337174] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[106136.337205] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[106136.337257] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[106136.337260] ahci 0000:00:1f.2: setting latency timer to 64
>[106136.337261] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[106136.337268] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[106136.337380] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[106136.337396] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[106136.373998] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[106136.379955] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[106136.568964] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[106136.652835] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[106136.655084] ata5: SATA link down (SStatus 0 SControl 300)
>[106136.656418] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106136.656785] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[106136.657203] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106136.657207] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106136.657876] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[106136.657879] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[106136.658039] ata1.00: configured for UDMA/133
>[106136.658246] sd 0:0:0:0: [sda] Starting disk
>[106136.658683] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106136.669201] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[106136.671461] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[106136.674834] ata2.00: configured for UDMA/100
>[106136.888792] firewire_core 0000:02:00.3: rediscovered device fw0
>[106136.965274] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[106136.971983] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[106137.089378] PM: resume of devices complete after 752.479 msecs
>[106137.089481] PM: Finishing wakeup.
>[106137.089482] Restarting tasks ... done.
>[106137.090250] video LNXVIDEO:00: Restoring backlight state
>[106137.094643] wlan0: deauthenticating from 00:1c:10:f5:47:57 by local choice (reason=3)
>[106137.143664] cfg80211: Calling CRDA to update world regulatory domain
>[106137.169991] cfg80211: World regulatory domain updated:
>[106137.169994] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106137.169995] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106137.169996] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106137.169998] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106137.169999] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106137.170000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106137.170054] cfg80211: Calling CRDA for country: CA
>[106137.172262] cfg80211: Regulatory domain changed to country: CA
>[106137.172265] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106137.172266] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[106137.172268] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[106137.172269] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106137.172270] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106137.172272] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[106137.302643] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[106137.327840] mmc0: new SDHC card at address aaaa
>[106137.327952] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[106137.330353]  mmcblk0: unknown partition table
>[106137.403578] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[106137.403764] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[106137.404665] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[106137.411915] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[106137.539651] usb 1-1.4: new full-speed USB device number 17 using ehci_hcd
>[106137.546102] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[106137.628013] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[106137.628019] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[106137.628023] usb 1-1.4: Product: BCM20702A0
>[106137.628026] usb 1-1.4: Manufacturer: Broadcom Corp
>[106137.628028] usb 1-1.4: SerialNumber: C01885DB015F
>[106140.539201] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[106140.539258] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[106143.652446] wlan0: authenticate with 00:1c:10:f5:47:57
>[106143.682283] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[106143.684204] wlan0: authenticated
>[106143.685019] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[106143.688288] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=5)
>[106143.691144] wlan0: associated
>[106143.691187] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[106454.918663] hid-generic 0005:1532:0014.0006: unknown main item tag 0x0
>[106454.918878] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input18
>[106454.919202] hid-generic 0005:1532:0014.0006: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[109382.674572] e1000e: em1 NIC Link is Down
>[109438.870316] ISO 9660 Extensions: Microsoft Joliet Level 3
>[109438.916838] ISO 9660 Extensions: RRIP_1991A
>[109459.711642] wlan0: deauthenticating from 00:1c:10:f5:47:57 by local choice (reason=3)
>[109459.765540] cfg80211: Calling CRDA to update world regulatory domain
>[109459.787423] cfg80211: World regulatory domain updated:
>[109459.787425] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[109459.787427] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109459.787428] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[109459.787429] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[109459.787430] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109459.787431] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109459.787452] cfg80211: Calling CRDA for country: CA
>[109459.788787] cfg80211: Regulatory domain changed to country: CA
>[109459.788789] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[109459.788791] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[109459.788792] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[109459.788794] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109459.788795] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109459.788796] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[109460.698995] usb 1-1.4: USB disconnect, device number 17
>[109460.670545] PM: Syncing filesystems ... done.
>[109460.703564] PM: Preparing system for mem sleep
>[109460.809165] mmc0: card aaaa removed
>[109460.811116] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[109460.822320] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[109460.833326] PM: Entering mem sleep
>[109460.833406] Suspending console(s) (use no_console_suspend to debug)
>[109460.960090] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[109460.960202] sd 0:0:0:0: [sda] Stopping disk
>[109461.183337] ACPI handle has no context!
>[109461.185127] ACPI handle has no context!
>[109461.195002] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[109461.237303] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[109461.706956] PM: suspend of devices complete after 873.737 msecs
>[109461.707039] PM: late suspend of devices complete after 0.081 msecs
>[109461.717979] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[109461.728837] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[109461.729090] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[109461.739829] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[109461.750887] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[109461.761822] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[109461.761870] PM: noirq suspend of devices complete after 54.846 msecs
>[109461.762599] ACPI: Preparing to enter system sleep state S3
>[109461.811842] PM: Saving platform NVS memory
>[109461.813454] Disabling non-boot CPUs ...
>[109461.814749] smpboot: CPU 1 is now offline
>[109461.815139] CPU 1 offline: Remove Rx thread
>[109461.816421] smpboot: CPU 2 is now offline
>[109461.816572] CPU 2 offline: Remove Rx thread
>[109461.816913] Broke affinity for irq 43
>[109461.817932] smpboot: CPU 3 is now offline
>[109461.818148] CPU 3 offline: Remove Rx thread
>[109461.819422] smpboot: CPU 4 is now offline
>[109461.819616] CPU 4 offline: Remove Rx thread
>[109461.820890] smpboot: CPU 5 is now offline
>[109461.821069] CPU 5 offline: Remove Rx thread
>[109461.822337] smpboot: CPU 6 is now offline
>[109461.822651] CPU 6 offline: Remove Rx thread
>[109461.822831] Broke affinity for irq 16
>[109461.822835] Broke affinity for irq 42
>[109461.823849] smpboot: CPU 7 is now offline
>[109461.824011] CPU 7 offline: Remove Rx thread
>[109461.824089] Extended CMOS year: 2000
>[109461.826221] ACPI: Low-level resume complete
>[109461.826275] PM: Restoring platform NVS memory
>[109461.826828] Extended CMOS year: 2000
>[109461.826933] Enabling non-boot CPUs ...
>[109461.827046] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[109461.863611] bnx2i: CPU 1 online: Create Rx thread
>[109461.863651] CPU1 is up
>[109461.863735] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[109461.897610] bnx2i: CPU 2 online: Create Rx thread
>[109461.897661] CPU2 is up
>[109461.897749] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[109461.927590] bnx2i: CPU 3 online: Create Rx thread
>[109461.927637] CPU3 is up
>[109461.927727] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[109461.960573] bnx2i: CPU 4 online: Create Rx thread
>[109461.960610] CPU4 is up
>[109461.960682] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[109461.993561] bnx2i: CPU 5 online: Create Rx thread
>[109461.993597] CPU5 is up
>[109461.993670] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[109462.018551] bnx2i: CPU 6 online: Create Rx thread
>[109462.018584] CPU6 is up
>[109462.018657] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[109462.043542] bnx2i: CPU 7 online: Create Rx thread
>[109462.043574] CPU7 is up
>[109462.060742] ACPI: Waking up from system sleep state S3
>[109462.106656] thinkpad_acpi: EC reports that Thermal Table has changed
>[109462.175518] i915 0000:00:02.0: power state changed by ACPI to D0
>[109462.186466] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[109462.197521] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[109462.230492] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[109462.241494] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[109462.252805] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[109462.263485] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[109462.285553] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[109462.307664] PM: noirq resume of devices complete after 132.252 msecs
>[109462.307773] PM: early resume of devices complete after 0.074 msecs
>[109462.307849] i915 0000:00:02.0: setting latency timer to 64
>[109462.307870] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[109462.307949] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[109462.307970] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[109462.307997] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[109462.308025] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[109462.308037] ahci 0000:00:1f.2: setting latency timer to 64
>[109462.308111] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[109462.308302] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[109462.362409] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[109462.405150] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[109462.540516] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[109462.613370] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[109462.614022] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[109462.614026] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[109462.614912] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[109462.614915] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[109462.615068] ata1.00: configured for UDMA/133
>[109462.615249] sd 0:0:0:0: [sda] Starting disk
>[109462.615324] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[109462.618004] ata5: SATA link down (SStatus 0 SControl 300)
>[109462.618958] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[109462.621349] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[109462.631718] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[109462.633985] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[109462.637370] ata2.00: configured for UDMA/100
>[109462.859347] firewire_core 0000:02:00.3: rediscovered device fw0
>[109463.020747] PM: resume of devices complete after 713.199 msecs
>[109463.020843] PM: Finishing wakeup.
>[109463.020844] Restarting tasks ... done.
>[109463.023363] video LNXVIDEO:00: Restoring backlight state
>[109463.196330] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[109463.251232] mmc0: new SDHC card at address aaaa
>[109463.251344] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[109463.253765]  mmcblk0: unknown partition table
>[109463.297213] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[109463.297492] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[109463.299070] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[109463.305820] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[109463.433653] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[109463.511229] usb 1-1.4: new full-speed USB device number 18 using ehci_hcd
>[109463.599895] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[109463.599901] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[109463.599904] usb 1-1.4: Product: BCM20702A0
>[109463.599907] usb 1-1.4: Manufacturer: Broadcom Corp
>[109463.599910] usb 1-1.4: SerialNumber: C01885DB015F
>[109469.488497] wlan0: authenticate with 02:1a:11:f1:20:65
>[109469.518898] wlan0: send auth to 02:1a:11:f1:20:65 (try 1/3)
>[109469.520853] wlan0: authenticated
>[109469.522089] wlan0: associate with 02:1a:11:f1:20:65 (try 1/3)
>[109469.527433] wlan0: RX AssocResp from 02:1a:11:f1:20:65 (capab=0x411 status=0 aid=2)
>[109469.532482] wlan0: associated
>[109469.532531] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[109469.532621] cfg80211: Calling CRDA for country: CA
>[109469.535302] cfg80211: Regulatory domain changed to country: CA
>[109469.535306] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[109469.535309] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[109469.535312] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[109469.535314] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109469.535316] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[109469.535318] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[109479.543411] VFS: busy inodes on changed media or resized disk sr0
>[110140.972529] Bridge firewalling registered
>[110141.012456] device virbr0-nic entered promiscuous mode
>[110141.084129] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[110141.105331] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[110141.210196] Ebtables v2.0 registered
>[110141.227747] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[110182.073750] IPv6: ADDRCONF(NETDEV_UP): macvtap0: link is not ready
>[110317.804400] IPv6: ADDRCONF(NETDEV_UP): vbr0: link is not ready
>[110383.554173] device virbr0-nic left promiscuous mode
>[110383.554181] virbr0: port 1(virbr0-nic) entered disabled state
>[110390.069901] device virbr0-nic entered promiscuous mode
>[110390.150875] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
>[110427.284818] wlan0: deauthenticating from 02:1a:11:f1:20:65 by local choice (reason=3)
>[110427.323612] cfg80211: Calling CRDA to update world regulatory domain
>[110427.326522] cfg80211: World regulatory domain updated:
>[110427.326527] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[110427.326530] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110427.326533] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[110427.326535] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[110427.326537] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110427.326540] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110427.326557] cfg80211: Calling CRDA for country: CA
>[110427.328723] cfg80211: Regulatory domain changed to country: CA
>[110427.328724] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[110427.328725] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[110427.328726] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[110427.328727] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110427.328728] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110427.328728] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[110428.935857] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[110428.942549] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[110429.079790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[110435.267423] wlan0: authenticate with 02:1a:11:f1:20:65
>[110435.289277] wlan0: send auth to 02:1a:11:f1:20:65 (try 1/3)
>[110435.291221] wlan0: authenticated
>[110435.291903] wlan0: associate with 02:1a:11:f1:20:65 (try 1/3)
>[110435.295615] wlan0: RX AssocResp from 02:1a:11:f1:20:65 (capab=0x411 status=0 aid=2)
>[110435.298774] wlan0: associated
>[110435.298816] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[110435.299017] cfg80211: Calling CRDA for country: CA
>[110435.301422] cfg80211: Regulatory domain changed to country: CA
>[110435.301426] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[110435.301429] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[110435.301432] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[110435.301434] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110435.301436] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[110435.301439] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[111214.382436] CPU4: Package power limit notification (total events = 55)
>[111214.382438] CPU2: Package power limit notification (total events = 55)
>[111214.382439] CPU0: Package power limit notification (total events = 55)
>[111214.382441] CPU7: Package power limit notification (total events = 55)
>[111214.382442] CPU1: Package power limit notification (total events = 55)
>[111214.382443] CPU3: Package power limit notification (total events = 55)
>[111214.382444] CPU5: Package power limit notification (total events = 55)
>[111214.382445] CPU6: Package power limit notification (total events = 55)
>[111214.393421] CPU2: Package power limit normal
>[111214.393422] CPU3: Package power limit normal
>[111214.393445] CPU1: Package power limit normal
>[111214.393446] CPU0: Package power limit normal
>[111214.393452] CPU4: Package power limit normal
>[111214.393453] CPU5: Package power limit normal
>[111214.393455] CPU6: Package power limit normal
>[111214.393456] CPU7: Package power limit normal
>[111390.967025] wlan0: deauthenticating from 02:1a:11:f1:20:65 by local choice (reason=3)
>[111391.011201] cfg80211: Calling CRDA to update world regulatory domain
>[111391.012425] cfg80211: World regulatory domain updated:
>[111391.012427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[111391.012429] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111391.012430] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[111391.012432] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[111391.012433] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111391.012435] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111391.012444] cfg80211: Calling CRDA for country: CA
>[111391.013304] cfg80211: Regulatory domain changed to country: CA
>[111391.013306] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[111391.013307] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[111391.013308] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[111391.013308] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111391.013309] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111391.013310] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[111391.922910] usb 1-1.4: USB disconnect, device number 18
>[111391.924184] PM: Syncing filesystems ... done.
>[111391.960377] PM: Preparing system for mem sleep
>[111392.040821] mmc0: card aaaa removed
>[111392.042793] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[111392.053887] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[111392.064993] PM: Entering mem sleep
>[111392.065066] Suspending console(s) (use no_console_suspend to debug)
>[111392.193989] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[111392.194118] sd 0:0:0:0: [sda] Stopping disk
>[111392.417103] ACPI handle has no context!
>[111392.418807] ACPI handle has no context!
>[111392.428693] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[111392.470668] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[111392.942714] PM: suspend of devices complete after 877.815 msecs
>[111392.942817] PM: late suspend of devices complete after 0.101 msecs
>[111392.953675] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[111392.964553] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[111392.964806] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[111392.975550] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[111392.986607] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[111392.997523] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[111392.997572] PM: noirq suspend of devices complete after 54.769 msecs
>[111392.998300] ACPI: Preparing to enter system sleep state S3
>[111393.045541] PM: Saving platform NVS memory
>[111393.047351] Disabling non-boot CPUs ...
>[111393.048640] smpboot: CPU 1 is now offline
>[111393.049172] CPU 1 offline: Remove Rx thread
>[111393.050741] smpboot: CPU 2 is now offline
>[111393.050963] CPU 2 offline: Remove Rx thread
>[111393.051227] Broke affinity for irq 43
>[111393.052252] smpboot: CPU 3 is now offline
>[111393.052401] CPU 3 offline: Remove Rx thread
>[111393.053689] smpboot: CPU 4 is now offline
>[111393.054030] CPU 4 offline: Remove Rx thread
>[111393.055276] smpboot: CPU 5 is now offline
>[111393.055432] CPU 5 offline: Remove Rx thread
>[111393.056709] smpboot: CPU 6 is now offline
>[111393.057020] CPU 6 offline: Remove Rx thread
>[111393.057249] Broke affinity for irq 16
>[111393.057253] Broke affinity for irq 42
>[111393.058270] smpboot: CPU 7 is now offline
>[111393.058453] CPU 7 offline: Remove Rx thread
>[111393.058596] Extended CMOS year: 2000
>[111393.060714] ACPI: Low-level resume complete
>[111393.060770] PM: Restoring platform NVS memory
>[111393.061326] Extended CMOS year: 2000
>[111393.061426] Enabling non-boot CPUs ...
>[111393.061527] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[111393.093298] bnx2i: CPU 1 online: Create Rx thread
>[111393.093339] CPU1 is up
>[111393.093396] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[111393.125291] bnx2i: CPU 2 online: Create Rx thread
>[111393.125309] CPU2 is up
>[111393.125346] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[111393.156279] bnx2i: CPU 3 online: Create Rx thread
>[111393.156298] CPU3 is up
>[111393.156335] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[111393.187267] bnx2i: CPU 4 online: Create Rx thread
>[111393.187285] CPU4 is up
>[111393.187321] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[111393.219261] bnx2i: CPU 5 online: Create Rx thread
>[111393.219278] CPU5 is up
>[111393.219313] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[111393.251254] bnx2i: CPU 6 online: Create Rx thread
>[111393.251271] CPU6 is up
>[111393.251308] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[111393.283240] bnx2i: CPU 7 online: Create Rx thread
>[111393.283257] CPU7 is up
>[111393.290862] ACPI: Waking up from system sleep state S3
>[111393.340286] thinkpad_acpi: EC reports that Thermal Table has changed
>[111393.409223] i915 0000:00:02.0: power state changed by ACPI to D0
>[111393.420172] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[111393.431224] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[111393.464210] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[111393.475210] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[111393.486349] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[111393.497200] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[111393.519287] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[111393.541336] PM: noirq resume of devices complete after 132.219 msecs
>[111393.541392] PM: early resume of devices complete after 0.033 msecs
>[111393.541418] i915 0000:00:02.0: setting latency timer to 64
>[111393.541430] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[111393.541471] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[111393.541484] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[111393.541517] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[111393.541569] ahci 0000:00:1f.2: setting latency timer to 64
>[111393.541628] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[111393.541685] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[111393.541713] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[111393.579434] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[111393.590202] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[111393.773176] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[111393.857079] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[111393.857508] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[111393.857509] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[111393.858175] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[111393.858179] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[111393.858331] ata1.00: configured for UDMA/133
>[111393.858482] sd 0:0:0:0: [sda] Starting disk
>[111393.859017] ata5: SATA link down (SStatus 0 SControl 300)
>[111393.861001] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[111393.864712] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[111393.867017] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[111393.877351] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[111393.879672] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[111393.883067] ata2.00: configured for UDMA/100
>[111394.093029] firewire_core 0000:02:00.3: rediscovered device fw0
>[111394.182410] PM: resume of devices complete after 641.204 msecs
>[111394.182505] PM: Finishing wakeup.
>[111394.182506] Restarting tasks ... done.
>[111394.184555] video LNXVIDEO:00: Restoring backlight state
>[111394.334870] usb 3-1: new high-speed USB device number 2 using xhci_hcd
>[111394.354932] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[111394.361903] usb 3-1: New USB device found, idVendor=0b05, idProduct=4c90
>[111394.361906] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[111394.361924] usb 3-1: Product: ASUS Transformer Pad TF700T
>[111394.361927] usb 3-1: Manufacturer: asus
>[111394.361930] usb 3-1: SerialNumber: C7OKAS190693
>[111394.362315] usb 3-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
>[111394.362321] usb 3-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
>[111394.410848] mmc0: new SDHC card at address aaaa
>[111394.411050] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[111394.413358]  mmcblk0: unknown partition table
>[111394.427988] usb 1-1.2: new high-speed USB device number 19 using ehci_hcd
>[111394.455937] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[111394.456228] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[111394.458698] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[111394.465493] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[111394.520679] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1402
>[111394.520681] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[111394.520683] usb 1-1.2: Product: Apple USB Ethernet Adapter
>[111394.520684] usb 1-1.2: Manufacturer: Apple Inc.      
>[111394.520685] usb 1-1.2: SerialNumber: 146950
>[111394.603699] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[111394.825793] asix 1-1.2:1.0: eth0: register 'asix' at usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet, 28:37:37:01:f1:d8
>[111395.003023] usb 1-1.4: new full-speed USB device number 20 using ehci_hcd
>[111395.092191] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[111395.092200] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[111395.092205] usb 1-1.4: Product: BCM20702A0
>[111395.092209] usb 1-1.4: Manufacturer: Broadcom Corp
>[111395.092213] usb 1-1.4: SerialNumber: C01885DB015F
>[111395.627064] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[111397.362643] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[111397.362698] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[111397.526777] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[111397.528869] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[111400.484079] wlan0: authenticate with 02:1a:11:f1:20:65
>[111400.500045] wlan0: send auth to 02:1a:11:f1:20:65 (try 1/3)
>[111400.501949] wlan0: authenticated
>[111400.503037] wlan0: associate with 02:1a:11:f1:20:65 (try 1/3)
>[111400.506689] wlan0: RX AssocResp from 02:1a:11:f1:20:65 (capab=0x411 status=0 aid=2)
>[111400.509419] wlan0: associated
>[111400.509458] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[111400.509580] cfg80211: Calling CRDA for country: CA
>[111400.512298] cfg80211: Regulatory domain changed to country: CA
>[111400.512302] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[111400.512305] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[111400.512308] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[111400.512310] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111400.512313] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[111400.512315] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[111409.405374] VFS: busy inodes on changed media or resized disk sr0
>[111429.226854] hid-generic 0005:1532:0014.0007: unknown main item tag 0x0
>[111429.227037] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input19
>[111429.227276] hid-generic 0005:1532:0014.0007: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[118448.288276] usb 3-1: USB disconnect, device number 2
>[128053.470566] wlan0: deauthenticating from 02:1a:11:f1:20:65 by local choice (reason=3)
>[128053.516783] cfg80211: Calling CRDA to update world regulatory domain
>[128053.521535] cfg80211: World regulatory domain updated:
>[128053.521539] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[128053.521543] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128053.521546] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[128053.521548] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[128053.521550] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128053.521553] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128053.521574] cfg80211: Calling CRDA for country: CA
>[128053.524021] cfg80211: Regulatory domain changed to country: CA
>[128053.524025] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[128053.524028] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[128053.524031] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[128053.524033] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128053.524035] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128053.524038] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[128054.151750] PM: Syncing filesystems ... done.
>[128054.197264] PM: Preparing system for mem sleep
>[128054.242336] usb 1-1.4: USB disconnect, device number 20
>[128054.290526] mmc0: card aaaa removed
>[128054.292470] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[128054.303513] Freezing remaining freezable tasks ... (elapsed 0.06 seconds) done.
>[128054.369485] PM: Entering mem sleep
>[128054.369567] Suspending console(s) (use no_console_suspend to debug)
>[128054.500453] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[128054.500528] sd 0:0:0:0: [sda] Stopping disk
>[128054.714754] ACPI handle has no context!
>[128054.716461] ACPI handle has no context!
>[128054.726374] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[128054.768536] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[128055.241314] PM: suspend of devices complete after 871.941 msecs
>[128055.241404] PM: late suspend of devices complete after 0.089 msecs
>[128055.252320] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[128055.263176] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[128055.263429] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[128055.274171] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[128055.285224] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[128055.296163] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[128055.296211] PM: noirq suspend of devices complete after 54.822 msecs
>[128055.296934] ACPI: Preparing to enter system sleep state S3
>[128055.346181] PM: Saving platform NVS memory
>[128055.348343] Disabling non-boot CPUs ...
>[128055.349952] smpboot: CPU 1 is now offline
>[128055.350207] CPU 1 offline: Remove Rx thread
>[128055.351509] smpboot: CPU 2 is now offline
>[128055.351702] CPU 2 offline: Remove Rx thread
>[128055.352008] Broke affinity for irq 43
>[128055.353024] smpboot: CPU 3 is now offline
>[128055.353252] CPU 3 offline: Remove Rx thread
>[128055.354566] smpboot: CPU 4 is now offline
>[128055.354905] CPU 4 offline: Remove Rx thread
>[128055.355134] Broke affinity for irq 42
>[128055.356162] smpboot: CPU 5 is now offline
>[128055.356491] CPU 5 offline: Remove Rx thread
>[128055.357742] smpboot: CPU 6 is now offline
>[128055.357934] CPU 6 offline: Remove Rx thread
>[128055.358181] Broke affinity for irq 16
>[128055.359203] smpboot: CPU 7 is now offline
>[128055.359394] CPU 7 offline: Remove Rx thread
>[128055.359535] Extended CMOS year: 2000
>[128055.361655] ACPI: Low-level resume complete
>[128055.361712] PM: Restoring platform NVS memory
>[128055.362268] Extended CMOS year: 2000
>[128055.362373] Enabling non-boot CPUs ...
>[128055.362487] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[128055.398945] bnx2i: CPU 1 online: Create Rx thread
>[128055.398983] CPU1 is up
>[128055.399066] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[128055.432944] bnx2i: CPU 2 online: Create Rx thread
>[128055.432995] CPU2 is up
>[128055.433085] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[128055.462932] bnx2i: CPU 3 online: Create Rx thread
>[128055.462981] CPU3 is up
>[128055.463069] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[128055.497906] bnx2i: CPU 4 online: Create Rx thread
>[128055.497943] CPU4 is up
>[128055.498017] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[128055.532895] bnx2i: CPU 5 online: Create Rx thread
>[128055.532931] CPU5 is up
>[128055.533004] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[128055.557883] bnx2i: CPU 6 online: Create Rx thread
>[128055.557916] CPU6 is up
>[128055.557989] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[128055.582876] bnx2i: CPU 7 online: Create Rx thread
>[128055.582909] CPU7 is up
>[128055.600058] ACPI: Waking up from system sleep state S3
>[128055.645994] thinkpad_acpi: EC reports that Thermal Table has changed
>[128055.714850] i915 0000:00:02.0: power state changed by ACPI to D0
>[128055.725798] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[128055.736847] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[128055.769825] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[128055.780823] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[128055.792133] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[128055.802818] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[128055.824891] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[128055.847022] PM: noirq resume of devices complete after 132.279 msecs
>[128055.847134] PM: early resume of devices complete after 0.076 msecs
>[128055.847205] i915 0000:00:02.0: setting latency timer to 64
>[128055.847230] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[128055.847300] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[128055.847303] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[128055.847334] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[128055.847452] ahci 0000:00:1f.2: setting latency timer to 64
>[128055.847459] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[128055.847545] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[128055.847591] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[128055.882747] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[128055.946392] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[128056.079891] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[128056.162699] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[128056.165339] ata5: SATA link down (SStatus 0 SControl 300)
>[128056.165655] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[128056.166253] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[128056.166257] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[128056.166415] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[128056.167113] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[128056.167117] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[128056.167413] ata1.00: configured for UDMA/133
>[128056.167625] sd 0:0:0:0: [sda] Starting disk
>[128056.168602] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[128056.179053] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[128056.181366] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[128056.184698] ata2.00: configured for UDMA/100
>[128056.191485] Extended CMOS year: 2000
>[128056.398644] firewire_core 0000:02:00.3: rediscovered device fw0
>[128056.572098] PM: resume of devices complete after 725.194 msecs
>[128056.572199] PM: Finishing wakeup.
>[128056.572200] Restarting tasks ... done.
>[128056.572963] usb 1-1.2: USB disconnect, device number 19
>[128056.573011] asix 1-1.2:1.0: eth0: unregister 'asix' usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet
>[128056.573603] video LNXVIDEO:00: Restoring backlight state
>[128056.744632] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[128056.799426] mmc0: new SDHC card at address aaaa
>[128056.799723] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[128056.802165]  mmcblk0: unknown partition table
>[128056.845525] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[128056.845729] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[128056.846578] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[128056.853302] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[128057.015552] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[128057.049461] usb 1-1.4: new full-speed USB device number 21 using ehci_hcd
>[128057.138168] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[128057.138174] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[128057.138177] usb 1-1.4: Product: BCM20702A0
>[128057.138181] usb 1-1.4: Manufacturer: Broadcom Corp
>[128057.138183] usb 1-1.4: SerialNumber: C01885DB015F
>[128063.364220] wlan0: authenticate with 02:1a:11:fe:3c:00
>[128063.379426] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[128063.398573] wlan0: authenticated
>[128063.399356] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[128063.491118] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=2)
>[128063.512550] wlan0: associated
>[128063.512594] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[128063.512704] cfg80211: Calling CRDA for country: CA
>[128063.515241] cfg80211: Regulatory domain changed to country: CA
>[128063.515245] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[128063.515248] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[128063.515251] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[128063.515253] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128063.515256] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[128063.515276] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[128073.270056] VFS: busy inodes on changed media or resized disk sr0
>[129455.596697] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[129455.679133] cfg80211: Calling CRDA to update world regulatory domain
>[129455.680520] cfg80211: World regulatory domain updated:
>[129455.680522] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[129455.680524] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129455.680525] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[129455.680527] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[129455.680528] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129455.680529] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129455.680541] cfg80211: Calling CRDA for country: CA
>[129455.681742] cfg80211: Regulatory domain changed to country: CA
>[129455.681743] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[129455.681744] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[129455.681745] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[129455.681746] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129455.681747] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129455.681748] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[129456.482269] usb 1-1.4: USB disconnect, device number 21
>[129456.522900] PM: Syncing filesystems ... done.
>[129456.557282] PM: Preparing system for mem sleep
>[129456.642944] mmc0: card aaaa removed
>[129456.645911] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[129456.657098] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[129456.668078] PM: Entering mem sleep
>[129456.668147] Suspending console(s) (use no_console_suspend to debug)
>[129456.797112] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[129456.797277] sd 0:0:0:0: [sda] Stopping disk
>[129457.014217] ACPI handle has no context!
>[129457.015910] ACPI handle has no context!
>[129457.025791] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[129457.067833] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[129457.539769] PM: suspend of devices complete after 871.845 msecs
>[129457.539871] PM: late suspend of devices complete after 0.100 msecs
>[129457.550743] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[129457.561600] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[129457.561851] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[129457.572589] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[129457.583641] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[129457.594578] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[129457.594632] PM: noirq suspend of devices complete after 54.778 msecs
>[129457.595358] ACPI: Preparing to enter system sleep state S3
>[129457.642598] PM: Saving platform NVS memory
>[129457.644375] Disabling non-boot CPUs ...
>[129457.645717] smpboot: CPU 1 is now offline
>[129457.646100] CPU 1 offline: Remove Rx thread
>[129457.647413] smpboot: CPU 2 is now offline
>[129457.647738] CPU 2 offline: Remove Rx thread
>[129457.648062] Broke affinity for irq 43
>[129457.649082] smpboot: CPU 3 is now offline
>[129457.649294] CPU 3 offline: Remove Rx thread
>[129457.650603] smpboot: CPU 4 is now offline
>[129457.650925] CPU 4 offline: Remove Rx thread
>[129457.651196] Broke affinity for irq 42
>[129457.652216] smpboot: CPU 5 is now offline
>[129457.652399] CPU 5 offline: Remove Rx thread
>[129457.653705] smpboot: CPU 6 is now offline
>[129457.653909] CPU 6 offline: Remove Rx thread
>[129457.654180] Broke affinity for irq 16
>[129457.655201] smpboot: CPU 7 is now offline
>[129457.655373] CPU 7 offline: Remove Rx thread
>[129457.655480] Extended CMOS year: 2000
>[129457.657601] ACPI: Low-level resume complete
>[129457.657658] PM: Restoring platform NVS memory
>[129457.658199] Extended CMOS year: 2000
>[129457.658321] Enabling non-boot CPUs ...
>[129457.658434] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[129457.695341] bnx2i: CPU 1 online: Create Rx thread
>[129457.695380] CPU1 is up
>[129457.695465] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[129457.729342] bnx2i: CPU 2 online: Create Rx thread
>[129457.729394] CPU2 is up
>[129457.729482] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[129457.759328] bnx2i: CPU 3 online: Create Rx thread
>[129457.759375] CPU3 is up
>[129457.759464] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[129457.794302] bnx2i: CPU 4 online: Create Rx thread
>[129457.794338] CPU4 is up
>[129457.794412] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[129457.829287] bnx2i: CPU 5 online: Create Rx thread
>[129457.829323] CPU5 is up
>[129457.829397] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[129457.854274] bnx2i: CPU 6 online: Create Rx thread
>[129457.854307] CPU6 is up
>[129457.854382] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[129457.879266] bnx2i: CPU 7 online: Create Rx thread
>[129457.879300] CPU7 is up
>[129457.896433] ACPI: Waking up from system sleep state S3
>[129457.998240] i915 0000:00:02.0: power state changed by ACPI to D0
>[129458.009187] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[129458.020244] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[129458.053212] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[129458.064211] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[129458.075519] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[129458.086203] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[129458.108272] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[129458.130403] PM: noirq resume of devices complete after 132.275 msecs
>[129458.130515] PM: early resume of devices complete after 0.075 msecs
>[129458.130577] i915 0000:00:02.0: setting latency timer to 64
>[129458.130620] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[129458.130677] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[129458.130693] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[129458.130696] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[129458.130747] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[129458.130749] ahci 0000:00:1f.2: setting latency timer to 64
>[129458.130916] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[129458.132448] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[129458.164147] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[129458.230267] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[129458.363175] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[129458.446072] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[129458.446713] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[129458.446717] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[129458.447466] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[129458.447469] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[129458.447716] ata1.00: configured for UDMA/133
>[129458.447869] sd 0:0:0:0: [sda] Starting disk
>[129458.448011] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[129458.450695] ata5: SATA link down (SStatus 0 SControl 300)
>[129458.451752] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[129458.454014] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[129458.464413] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[129458.466740] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[129458.470124] ata2.00: configured for UDMA/100
>[129458.478685] Extended CMOS year: 2000
>[129458.682058] firewire_core 0000:02:00.3: rediscovered device fw0
>[129458.874502] PM: resume of devices complete after 744.254 msecs
>[129458.874591] PM: Finishing wakeup.
>[129458.874592] Restarting tasks ... done.
>[129458.875489] video LNXVIDEO:00: Restoring backlight state
>[129459.052624] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[129459.111948] mmc0: new SDHC card at address aaaa
>[129459.112240] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[129459.114644]  mmcblk0: unknown partition table
>[129459.152789] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[129459.153022] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[129459.154193] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[129459.160959] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[129459.294683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[129459.337897] usb 1-1.4: new full-speed USB device number 22 using ehci_hcd
>[129459.426647] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[129459.426654] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[129459.426657] usb 1-1.4: Product: BCM20702A0
>[129459.426660] usb 1-1.4: Manufacturer: Broadcom Corp
>[129459.426662] usb 1-1.4: SerialNumber: C01885DB015F
>[129465.547207] wlan0: authenticate with 02:1a:11:fe:3c:00
>[129465.559391] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[129465.575091] wlan0: authenticated
>[129465.575450] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[129465.579944] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=2)
>[129465.604144] wlan0: associated
>[129465.604204] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[129465.604352] cfg80211: Calling CRDA for country: CA
>[129465.606266] cfg80211: Regulatory domain changed to country: CA
>[129465.606271] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[129465.606274] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[129465.606277] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[129465.606279] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129465.606281] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[129465.606284] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[129475.425138] VFS: busy inodes on changed media or resized disk sr0
>[130096.369574] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[130096.412225] cfg80211: Calling CRDA to update world regulatory domain
>[130096.413429] cfg80211: World regulatory domain updated:
>[130096.413431] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[130096.413433] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130096.413434] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[130096.413435] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[130096.413437] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130096.413438] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130096.413449] cfg80211: Calling CRDA for country: CA
>[130096.414793] cfg80211: Regulatory domain changed to country: CA
>[130096.414795] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[130096.414797] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[130096.414798] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[130096.414799] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130096.414801] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130096.414802] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[130097.330153] PM: Syncing filesystems ... done.
>[130097.377899] PM: Preparing system for mem sleep
>[130097.412829] usb 1-1.4: USB disconnect, device number 22
>[130097.488851] mmc0: card aaaa removed
>[130097.490814] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[130097.501982] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
>[130097.524014] PM: Entering mem sleep
>[130097.524096] Suspending console(s) (use no_console_suspend to debug)
>[130097.652134] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[130097.652272] sd 0:0:0:0: [sda] Stopping disk
>[130097.873118] ACPI handle has no context!
>[130097.874900] ACPI handle has no context!
>[130097.884719] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[130097.926870] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[130098.395653] PM: suspend of devices complete after 871.742 msecs
>[130098.395740] PM: late suspend of devices complete after 0.086 msecs
>[130098.406682] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[130098.417561] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[130098.417817] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[130098.428557] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[130098.439599] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[130098.450520] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[130098.450572] PM: noirq suspend of devices complete after 54.846 msecs
>[130098.451298] ACPI: Preparing to enter system sleep state S3
>[130098.498541] PM: Saving platform NVS memory
>[130098.500287] Disabling non-boot CPUs ...
>[130098.501616] smpboot: CPU 1 is now offline
>[130098.501972] CPU 1 offline: Remove Rx thread
>[130098.503292] smpboot: CPU 2 is now offline
>[130098.503617] CPU 2 offline: Remove Rx thread
>[130098.503928] Broke affinity for irq 43
>[130098.504951] smpboot: CPU 3 is now offline
>[130098.505109] CPU 3 offline: Remove Rx thread
>[130098.506370] smpboot: CPU 4 is now offline
>[130098.506693] CPU 4 offline: Remove Rx thread
>[130098.506985] Broke affinity for irq 42
>[130098.508006] smpboot: CPU 5 is now offline
>[130098.508201] CPU 5 offline: Remove Rx thread
>[130098.509485] smpboot: CPU 6 is now offline
>[130098.509675] CPU 6 offline: Remove Rx thread
>[130098.509925] Broke affinity for irq 16
>[130098.510952] smpboot: CPU 7 is now offline
>[130098.511131] CPU 7 offline: Remove Rx thread
>[130098.511270] Extended CMOS year: 2000
>[130098.513392] ACPI: Low-level resume complete
>[130098.513447] PM: Restoring platform NVS memory
>[130098.514002] Extended CMOS year: 2000
>[130098.514106] Enabling non-boot CPUs ...
>[130098.514208] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[130098.546297] bnx2i: CPU 1 online: Create Rx thread
>[130098.546338] CPU1 is up
>[130098.546400] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[130098.578292] bnx2i: CPU 2 online: Create Rx thread
>[130098.578309] CPU2 is up
>[130098.578344] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[130098.609277] bnx2i: CPU 3 online: Create Rx thread
>[130098.609295] CPU3 is up
>[130098.609331] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[130098.641266] bnx2i: CPU 4 online: Create Rx thread
>[130098.641283] CPU4 is up
>[130098.641319] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[130098.673256] bnx2i: CPU 5 online: Create Rx thread
>[130098.673274] CPU5 is up
>[130098.673308] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[130098.705247] bnx2i: CPU 6 online: Create Rx thread
>[130098.705263] CPU6 is up
>[130098.705299] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[130098.737239] bnx2i: CPU 7 online: Create Rx thread
>[130098.737256] CPU7 is up
>[130098.744865] ACPI: Waking up from system sleep state S3
>[130098.794284] thinkpad_acpi: EC reports that Thermal Table has changed
>[130098.863215] i915 0000:00:02.0: power state changed by ACPI to D0
>[130098.874162] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[130098.885215] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[130098.918201] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[130098.929195] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[130098.940340] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[130098.951187] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[130098.973276] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[130098.995330] PM: noirq resume of devices complete after 132.225 msecs
>[130098.995386] PM: early resume of devices complete after 0.034 msecs
>[130098.995414] i915 0000:00:02.0: setting latency timer to 64
>[130098.995424] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[130098.995452] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[130098.995509] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[130098.995517] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[130098.995520] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[130098.995551] ahci 0000:00:1f.2: setting latency timer to 64
>[130098.995638] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[130098.995668] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[130099.032105] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[130099.034436] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[130099.227209] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[130099.313041] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[130099.313069] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[130099.313468] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[130099.313472] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[130099.314152] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[130099.314153] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[130099.314392] ata1.00: configured for UDMA/133
>[130099.314462] sd 0:0:0:0: [sda] Starting disk
>[130099.315160] ata5: SATA link down (SStatus 0 SControl 300)
>[130099.316670] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[130099.318995] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[130099.329460] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[130099.331791] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[130099.335155] ata2.00: configured for UDMA/100
>[130099.354733] Extended CMOS year: 2000
>[130099.547009] firewire_core 0000:02:00.3: rediscovered device fw0
>[130099.645504] PM: resume of devices complete after 650.324 msecs
>[130099.645593] PM: Finishing wakeup.
>[130099.645594] Restarting tasks ... done.
>[130099.647134] video LNXVIDEO:00: Restoring backlight state
>[130099.814501] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[130099.872954] mmc0: new SDHC card at address aaaa
>[130099.873213] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[130099.875573]  mmcblk0: unknown partition table
>[130099.914831] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[130099.915034] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[130099.915923] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[130099.922717] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[130100.068235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[130100.197941] usb 1-1.4: new full-speed USB device number 23 using ehci_hcd
>[130100.286647] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[130100.286668] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[130100.286672] usb 1-1.4: Product: BCM20702A0
>[130100.286674] usb 1-1.4: Manufacturer: Broadcom Corp
>[130100.286677] usb 1-1.4: SerialNumber: C01885DB015F
>[130102.913455] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[130102.913505] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[130107.074981] wlan0: authenticate with 02:1a:11:fe:3c:00
>[130107.094321] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[130107.096261] wlan0: authenticated
>[130107.097092] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[130107.100716] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=2)
>[130107.103402] wlan0: associated
>[130107.103439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[130107.103552] cfg80211: Calling CRDA for country: CA
>[130107.106081] cfg80211: Regulatory domain changed to country: CA
>[130107.106083] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[130107.106084] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[130107.106085] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[130107.106085] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130107.106086] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[130107.106087] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[130116.018603] VFS: busy inodes on changed media or resized disk sr0
>[130242.999802] usb 1-1.2: new high-speed USB device number 24 using ehci_hcd
>[130243.109373] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1402
>[130243.109379] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[130243.109383] usb 1-1.2: Product: Apple USB Ethernet Adapter
>[130243.109386] usb 1-1.2: Manufacturer: Apple Inc.      
>[130243.109388] usb 1-1.2: SerialNumber: 146950
>[130243.415447] asix 1-1.2:1.0: eth0: register 'asix' at usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet, 28:37:37:01:f1:d8
>[130244.224337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[130246.042406] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[130246.044654] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[130311.249498] hid-generic 0005:1532:0014.0008: unknown main item tag 0x0
>[130311.249650] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input20
>[130311.249915] hid-generic 0005:1532:0014.0008: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[151361.337313] usb 1-1.2: USB disconnect, device number 24
>[151361.339750] asix 1-1.2:1.0: eth0: unregister 'asix' usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet
>[151362.428891] e1000e: em1 NIC Link is Down
>[151364.719067] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
>[151364.719074] thinkpad_acpi: unhandled HKEY event 0x6040
>[151364.719077] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>[151364.719578] thinkpad_acpi: EC reports that Thermal Table has changed
>[152000.030417] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[152002.074319] usb 1-1.2: new high-speed USB device number 25 using ehci_hcd
>[152002.184859] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1402
>[152002.184866] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[152002.184870] usb 1-1.2: Product: Apple USB Ethernet Adapter
>[152002.184873] usb 1-1.2: Manufacturer: Apple Inc.      
>[152002.184876] usb 1-1.2: SerialNumber: 146950
>[152002.491739] asix 1-1.2:1.0: eth0: register 'asix' at usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet, 28:37:37:01:f1:d8
>[152003.291026] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[152005.118177] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[152005.120583] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[152006.012136] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
>[152006.012144] thinkpad_acpi: unhandled HKEY event 0x6040
>[152006.012147] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
>[152006.012654] thinkpad_acpi: EC reports that Thermal Table has changed
>[167281.413144] usb 1-1.4: USB disconnect, device number 23
>[167281.419791] PM: Syncing filesystems ... done.
>[167281.458894] PM: Preparing system for mem sleep
>[167281.717764] mmc0: card aaaa removed
>[167281.719609] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[167281.730799] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[167281.741824] PM: Entering mem sleep
>[167281.741909] Suspending console(s) (use no_console_suspend to debug)
>[167281.879050] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[167281.879132] sd 0:0:0:0: [sda] Stopping disk
>[167282.101996] ACPI handle has no context!
>[167282.103611] ACPI handle has no context!
>[167282.113500] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[167282.156245] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[167282.628451] PM: suspend of devices complete after 886.729 msecs
>[167282.628555] PM: late suspend of devices complete after 0.102 msecs
>[167282.639465] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[167282.650322] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[167282.650574] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[167282.661316] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[167282.672370] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[167282.683309] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[167282.683355] PM: noirq suspend of devices complete after 54.815 msecs
>[167282.684078] ACPI: Preparing to enter system sleep state S3
>[167282.733328] PM: Saving platform NVS memory
>[167282.735302] Disabling non-boot CPUs ...
>[167282.736631] smpboot: CPU 1 is now offline
>[167282.737008] CPU 1 offline: Remove Rx thread
>[167282.738320] smpboot: CPU 2 is now offline
>[167282.738484] CPU 2 offline: Remove Rx thread
>[167282.738835] Broke affinity for irq 43
>[167282.739852] smpboot: CPU 3 is now offline
>[167282.740044] CPU 3 offline: Remove Rx thread
>[167282.741346] smpboot: CPU 4 is now offline
>[167282.741674] CPU 4 offline: Remove Rx thread
>[167282.742973] smpboot: CPU 5 is now offline
>[167282.743237] CPU 5 offline: Remove Rx thread
>[167282.744504] smpboot: CPU 6 is now offline
>[167282.744688] CPU 6 offline: Remove Rx thread
>[167282.744940] Broke affinity for irq 16
>[167282.744945] Broke affinity for irq 42
>[167282.745968] smpboot: CPU 7 is now offline
>[167282.746159] CPU 7 offline: Remove Rx thread
>[167282.746297] Extended CMOS year: 2000
>[167282.748415] ACPI: Low-level resume complete
>[167282.748469] PM: Restoring platform NVS memory
>[167282.749031] Extended CMOS year: 2000
>[167282.749143] Enabling non-boot CPUs ...
>[167282.749238] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[167282.781073] bnx2i: CPU 1 online: Create Rx thread
>[167282.781112] CPU1 is up
>[167282.781173] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[167282.813074] bnx2i: CPU 2 online: Create Rx thread
>[167282.813092] CPU2 is up
>[167282.813129] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[167282.844061] bnx2i: CPU 3 online: Create Rx thread
>[167282.844078] CPU3 is up
>[167282.844116] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[167282.876051] bnx2i: CPU 4 online: Create Rx thread
>[167282.876068] CPU4 is up
>[167282.876104] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[167282.908040] bnx2i: CPU 5 online: Create Rx thread
>[167282.908059] CPU5 is up
>[167282.908093] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[167282.940035] bnx2i: CPU 6 online: Create Rx thread
>[167282.940052] CPU6 is up
>[167282.940086] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[167282.972025] bnx2i: CPU 7 online: Create Rx thread
>[167282.972041] CPU7 is up
>[167282.979659] ACPI: Waking up from system sleep state S3
>[167283.085009] i915 0000:00:02.0: power state changed by ACPI to D0
>[167283.095956] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[167283.107012] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[167283.139994] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[167283.150993] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[167283.162134] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[167283.172983] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[167283.195069] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[167283.217124] PM: noirq resume of devices complete after 132.225 msecs
>[167283.217181] PM: early resume of devices complete after 0.034 msecs
>[167283.217206] i915 0000:00:02.0: setting latency timer to 64
>[167283.217219] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[167283.217246] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[167283.217294] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[167283.217315] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[167283.217410] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[167283.217411] ahci 0000:00:1f.2: setting latency timer to 64
>[167283.217530] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[167283.217537] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[167283.255535] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[167283.259963] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[167283.450005] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[167283.532850] ata5: SATA link down (SStatus 0 SControl 300)
>[167283.534850] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[167283.535212] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[167283.535213] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[167283.535779] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[167283.535780] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[167283.535980] ata1.00: configured for UDMA/133
>[167283.536112] sd 0:0:0:0: [sda] Starting disk
>[167283.536786] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[167283.540412] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[167283.542687] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[167283.553127] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[167283.555390] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[167283.558766] ata2.00: configured for UDMA/100
>[167283.567490] Extended CMOS year: 2000
>[167283.768811] firewire_core 0000:02:00.3: rediscovered device fw0
>[167283.866130] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[167283.872811] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[167283.991442] PM: resume of devices complete after 774.505 msecs
>[167283.991555] PM: Finishing wakeup.
>[167283.991556] Restarting tasks ... done.
>[167283.993113] video LNXVIDEO:00: Restoring backlight state
>[167283.995631] wlan0: deauthenticated from 02:1a:11:fe:3c:00 (Reason: 7)
>[167284.037761] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[167284.044532] cfg80211: Calling CRDA to update world regulatory domain
>[167284.067343] cfg80211: World regulatory domain updated:
>[167284.067345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[167284.067347] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167284.067348] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[167284.067349] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[167284.067351] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167284.067352] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167284.067361] cfg80211: Calling CRDA for country: CA
>[167284.068624] cfg80211: Regulatory domain changed to country: CA
>[167284.068626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[167284.068627] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[167284.068628] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[167284.068629] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167284.068629] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167284.068630] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[167284.210757] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[167284.218529] mmc0: new SDHC card at address aaaa
>[167284.218669] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[167284.221031]  mmcblk0: unknown partition table
>[167284.311642] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[167284.311823] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[167284.313547] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[167284.320304] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[167284.409817] usb 1-1.4: new full-speed USB device number 26 using ehci_hcd
>[167284.464790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[167284.498173] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[167284.498179] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[167284.498182] usb 1-1.4: Product: BCM20702A0
>[167284.498185] usb 1-1.4: Manufacturer: Broadcom Corp
>[167284.498188] usb 1-1.4: SerialNumber: C01885DB015F
>[167285.229948] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[167287.208172] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[167287.210701] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[167287.251325] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[167287.251371] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[167291.342751] wlan0: authenticate with 02:1a:11:fe:3c:00
>[167291.381519] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[167291.383487] wlan0: authenticated
>[167291.384310] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[167291.391454] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=2)
>[167291.394574] wlan0: associated
>[167291.394621] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[167291.394752] cfg80211: Calling CRDA for country: CA
>[167291.397532] cfg80211: Regulatory domain changed to country: CA
>[167291.397536] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[167291.397539] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[167291.397542] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[167291.397544] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167291.397546] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[167291.397549] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[167300.637357] VFS: busy inodes on changed media or resized disk sr0
>[167733.657358] hid-generic 0005:1532:0014.0009: unknown main item tag 0x0
>[167733.657719] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input21
>[167733.658172] hid-generic 0005:1532:0014.0009: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[169787.537337] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[169787.575079] cfg80211: Calling CRDA to update world regulatory domain
>[169787.577993] cfg80211: World regulatory domain updated:
>[169787.577998] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[169787.578002] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169787.578004] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[169787.578007] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[169787.578009] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169787.578011] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169787.578037] cfg80211: Calling CRDA for country: CA
>[169787.580811] cfg80211: Regulatory domain changed to country: CA
>[169787.580815] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[169787.580818] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[169787.580821] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[169787.580823] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169787.580825] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169787.580828] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[169788.133896] usb 1-1.4: USB disconnect, device number 26
>[169788.209763] PM: Syncing filesystems ... done.
>[169788.238807] PM: Preparing system for mem sleep
>[169788.327269] mmc0: card aaaa removed
>[169788.329245] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[169788.340352] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[169788.351458] PM: Entering mem sleep
>[169788.351531] Suspending console(s) (use no_console_suspend to debug)
>[169788.481237] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[169788.481321] sd 0:0:0:0: [sda] Stopping disk
>[169788.692609] ACPI handle has no context!
>[169788.694335] ACPI handle has no context!
>[169788.704138] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[169788.746263] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[169789.224084] PM: suspend of devices complete after 872.736 msecs
>[169789.224189] PM: late suspend of devices complete after 0.103 msecs
>[169789.235107] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[169789.245965] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[169789.246216] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[169789.256958] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[169789.268020] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[169789.278951] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[169789.279000] PM: noirq suspend of devices complete after 54.826 msecs
>[169789.279725] ACPI: Preparing to enter system sleep state S3
>[169789.328971] PM: Saving platform NVS memory
>[169789.330819] Disabling non-boot CPUs ...
>[169789.332158] smpboot: CPU 1 is now offline
>[169789.332546] CPU 1 offline: Remove Rx thread
>[169789.333843] smpboot: CPU 2 is now offline
>[169789.334175] CPU 2 offline: Remove Rx thread
>[169789.334483] Broke affinity for irq 43
>[169789.335497] smpboot: CPU 3 is now offline
>[169789.335691] CPU 3 offline: Remove Rx thread
>[169789.336967] smpboot: CPU 4 is now offline
>[169789.337295] CPU 4 offline: Remove Rx thread
>[169789.338572] smpboot: CPU 5 is now offline
>[169789.338743] CPU 5 offline: Remove Rx thread
>[169789.340026] smpboot: CPU 6 is now offline
>[169789.340235] CPU 6 offline: Remove Rx thread
>[169789.340490] Broke affinity for irq 16
>[169789.340495] Broke affinity for irq 42
>[169789.341512] smpboot: CPU 7 is now offline
>[169789.341696] CPU 7 offline: Remove Rx thread
>[169789.341824] Extended CMOS year: 2000
>[169789.343939] ACPI: Low-level resume complete
>[169789.343995] PM: Restoring platform NVS memory
>[169789.344542] Extended CMOS year: 2000
>[169789.344662] Enabling non-boot CPUs ...
>[169789.344775] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[169789.381712] bnx2i: CPU 1 online: Create Rx thread
>[169789.381752] CPU1 is up
>[169789.381835] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[169789.415714] bnx2i: CPU 2 online: Create Rx thread
>[169789.415764] CPU2 is up
>[169789.415853] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[169789.445699] bnx2i: CPU 3 online: Create Rx thread
>[169789.445747] CPU3 is up
>[169789.445836] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[169789.480677] bnx2i: CPU 4 online: Create Rx thread
>[169789.480712] CPU4 is up
>[169789.480784] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[169789.513664] bnx2i: CPU 5 online: Create Rx thread
>[169789.513698] CPU5 is up
>[169789.513773] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[169789.538655] bnx2i: CPU 6 online: Create Rx thread
>[169789.538689] CPU6 is up
>[169789.538761] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[169789.563649] bnx2i: CPU 7 online: Create Rx thread
>[169789.563682] CPU7 is up
>[169789.580775] ACPI: Waking up from system sleep state S3
>[169789.626756] thinkpad_acpi: EC reports that Thermal Table has changed
>[169789.695623] i915 0000:00:02.0: power state changed by ACPI to D0
>[169789.706571] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[169789.717630] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[169789.750598] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[169789.761600] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[169789.772910] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[169789.783594] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[169789.805669] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[169789.827801] PM: noirq resume of devices complete after 132.285 msecs
>[169789.827913] PM: early resume of devices complete after 0.076 msecs
>[169789.827978] i915 0000:00:02.0: setting latency timer to 64
>[169789.828010] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[169789.828049] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[169789.828071] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[169789.828115] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[169789.828165] ahci 0000:00:1f.2: setting latency timer to 64
>[169789.828221] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[169789.828380] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[169789.828388] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[169789.869543] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[169789.927633] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[169790.060584] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[169790.145471] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[169790.145500] ata5: SATA link down (SStatus 0 SControl 300)
>[169790.148163] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[169790.148777] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[169790.148781] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[169790.149553] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[169790.149589] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[169790.149592] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[169790.149833] ata1.00: configured for UDMA/133
>[169790.149977] sd 0:0:0:0: [sda] Starting disk
>[169790.151436] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[169790.161940] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[169790.164216] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[169790.167581] ata2.00: configured for UDMA/100
>[169790.379477] firewire_core 0000:02:00.3: rediscovered device fw0
>[169790.539670] PM: resume of devices complete after 711.982 msecs
>[169790.539762] PM: Finishing wakeup.
>[169790.539763] Restarting tasks ... done.
>[169790.540586] video LNXVIDEO:00: Restoring backlight state
>[169790.541260] usb 1-1.2: USB disconnect, device number 25
>[169790.541343] asix 1-1.2:1.0: eth0: unregister 'asix' usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet
>[169790.708705] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[169790.776406] mmc0: new SDHC card at address aaaa
>[169790.776670] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[169790.779084]  mmcblk0: unknown partition table
>[169790.809257] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
>[169790.809478] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[169790.810345] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[169790.817077] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[169790.944962] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[169791.030318] usb 1-1.4: new full-speed USB device number 27 using ehci_hcd
>[169791.119004] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[169791.119011] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[169791.119015] usb 1-1.4: Product: BCM20702A0
>[169791.119017] usb 1-1.4: Manufacturer: Broadcom Corp
>[169791.119020] usb 1-1.4: SerialNumber: C01885DB015F
>[169797.104583] wlan0: authenticate with 02:1a:11:fe:3c:00
>[169797.141385] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[169797.145230] wlan0: authenticated
>[169797.146216] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[169797.150043] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=1)
>[169797.159070] wlan0: associated
>[169797.159116] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[169797.159279] cfg80211: Calling CRDA for country: CA
>[169797.160569] cfg80211: Regulatory domain changed to country: CA
>[169797.160571] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[169797.160572] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[169797.160573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[169797.160574] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169797.160574] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[169797.160575] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[169807.187755] VFS: busy inodes on changed media or resized disk sr0
>[171761.097828] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[171761.176632] cfg80211: Calling CRDA to update world regulatory domain
>[171761.178854] cfg80211: World regulatory domain updated:
>[171761.178856] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[171761.178858] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171761.178859] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[171761.178860] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[171761.178862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171761.178863] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171761.178971] cfg80211: Calling CRDA for country: CA
>[171761.179881] cfg80211: Regulatory domain changed to country: CA
>[171761.179882] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[171761.179883] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[171761.179884] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[171761.179885] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171761.179886] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171761.179886] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[171761.925342] usb 1-1.4: USB disconnect, device number 27
>[171762.024937] PM: Syncing filesystems ... done.
>[171762.053937] PM: Preparing system for mem sleep
>[171762.143305] mmc0: card aaaa removed
>[171762.145257] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[171762.156378] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[171762.167459] PM: Entering mem sleep
>[171762.167526] Suspending console(s) (use no_console_suspend to debug)
>[171762.299221] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[171762.299376] sd 0:0:0:0: [sda] Stopping disk
>[171762.508534] ACPI handle has no context!
>[171762.510291] ACPI handle has no context!
>[171762.520158] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[171762.562621] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[171763.043226] PM: suspend of devices complete after 875.841 msecs
>[171763.043296] PM: late suspend of devices complete after 0.069 msecs
>[171763.054141] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[171763.065000] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[171763.065255] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[171763.075994] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[171763.087059] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[171763.097989] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[171763.098036] PM: noirq suspend of devices complete after 54.752 msecs
>[171763.098764] ACPI: Preparing to enter system sleep state S3
>[171763.146013] PM: Saving platform NVS memory
>[171763.147855] Disabling non-boot CPUs ...
>[171763.149459] smpboot: CPU 1 is now offline
>[171763.149719] CPU 1 offline: Remove Rx thread
>[171763.151021] smpboot: CPU 2 is now offline
>[171763.151350] CPU 2 offline: Remove Rx thread
>[171763.151663] Broke affinity for irq 43
>[171763.152677] smpboot: CPU 3 is now offline
>[171763.152851] CPU 3 offline: Remove Rx thread
>[171763.154127] smpboot: CPU 4 is now offline
>[171763.154450] CPU 4 offline: Remove Rx thread
>[171763.155747] smpboot: CPU 5 is now offline
>[171763.155929] CPU 5 offline: Remove Rx thread
>[171763.157202] smpboot: CPU 6 is now offline
>[171763.157385] CPU 6 offline: Remove Rx thread
>[171763.157636] Broke affinity for irq 16
>[171763.157640] Broke affinity for irq 42
>[171763.158658] smpboot: CPU 7 is now offline
>[171763.158863] CPU 7 offline: Remove Rx thread
>[171763.159015] Extended CMOS year: 2000
>[171763.161135] ACPI: Low-level resume complete
>[171763.161190] PM: Restoring platform NVS memory
>[171763.161729] Extended CMOS year: 2000
>[171763.161831] Enabling non-boot CPUs ...
>[171763.161932] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[171763.193756] bnx2i: CPU 1 online: Create Rx thread
>[171763.193797] CPU1 is up
>[171763.193857] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[171763.225752] bnx2i: CPU 2 online: Create Rx thread
>[171763.225770] CPU2 is up
>[171763.225807] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[171763.256739] bnx2i: CPU 3 online: Create Rx thread
>[171763.256756] CPU3 is up
>[171763.256792] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[171763.288728] bnx2i: CPU 4 online: Create Rx thread
>[171763.288747] CPU4 is up
>[171763.288785] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[171763.319720] bnx2i: CPU 5 online: Create Rx thread
>[171763.319737] CPU5 is up
>[171763.319773] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[171763.351713] bnx2i: CPU 6 online: Create Rx thread
>[171763.351731] CPU6 is up
>[171763.351767] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[171763.383700] bnx2i: CPU 7 online: Create Rx thread
>[171763.383718] CPU7 is up
>[171763.391295] ACPI: Waking up from system sleep state S3
>[171763.440751] thinkpad_acpi: EC reports that Thermal Table has changed
>[171763.509683] i915 0000:00:02.0: power state changed by ACPI to D0
>[171763.520634] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[171763.531685] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[171763.564671] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[171763.575667] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[171763.586812] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[171763.597660] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[171763.619770] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[171763.641802] PM: noirq resume of devices complete after 132.222 msecs
>[171763.641858] PM: early resume of devices complete after 0.034 msecs
>[171763.641886] i915 0000:00:02.0: setting latency timer to 64
>[171763.641898] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[171763.641933] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[171763.641952] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[171763.641960] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[171763.642043] ahci 0000:00:1f.2: setting latency timer to 64
>[171763.642045] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[171763.642100] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[171763.642133] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[171763.680702] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[171763.703595] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[171763.873683] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[171763.957533] ata5: SATA link down (SStatus 0 SControl 300)
>[171763.959545] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[171763.959951] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[171763.959956] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[171763.960555] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[171763.960557] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[171763.960690] ata1.00: configured for UDMA/133
>[171763.960779] sd 0:0:0:0: [sda] Starting disk
>[171763.961463] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[171763.965095] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[171763.967430] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[171763.977926] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[171763.980180] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[171763.983577] ata2.00: configured for UDMA/100
>[171763.992210] Extended CMOS year: 2000
>[171764.193545] firewire_core 0000:02:00.3: rediscovered device fw0
>[171764.264119] PM: resume of devices complete after 622.436 msecs
>[171764.264214] PM: Finishing wakeup.
>[171764.264215] Restarting tasks ... done.
>[171764.265086] video LNXVIDEO:00: Restoring backlight state
>[171764.432501] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[171764.500409] mmc0: new SDHC card at address aaaa
>[171764.500543] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[171764.502785]  mmcblk0: unknown partition table
>[171764.533363] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[171764.533571] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[171764.535111] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[171764.541927] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[171764.680888] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[171764.844405] usb 1-1.4: new full-speed USB device number 28 using ehci_hcd
>[171764.933674] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[171764.933680] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[171764.933684] usb 1-1.4: Product: BCM20702A0
>[171764.933687] usb 1-1.4: Manufacturer: Broadcom Corp
>[171764.933689] usb 1-1.4: SerialNumber: C01885DB015F
>[171767.512128] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[171767.512177] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[171771.682555] wlan0: authenticate with 02:1a:11:fe:3c:00
>[171771.722948] wlan0: send auth to 02:1a:11:fe:3c:00 (try 1/3)
>[171771.724866] wlan0: authenticated
>[171771.725624] wlan0: associate with 02:1a:11:fe:3c:00 (try 1/3)
>[171771.730885] wlan0: RX AssocResp from 02:1a:11:fe:3c:00 (capab=0x411 status=0 aid=1)
>[171771.734091] wlan0: associated
>[171771.734143] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[171771.734263] cfg80211: Calling CRDA for country: CA
>[171771.736969] cfg80211: Regulatory domain changed to country: CA
>[171771.736973] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[171771.736976] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[171771.736979] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[171771.736981] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171771.736983] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[171771.736986] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[171780.679798] VFS: busy inodes on changed media or resized disk sr0
>[171783.268430] usb 1-1.2: new high-speed USB device number 29 using ehci_hcd
>[171783.377251] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=1402
>[171783.377258] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[171783.377262] usb 1-1.2: Product: Apple USB Ethernet Adapter
>[171783.377265] usb 1-1.2: Manufacturer: Apple Inc.      
>[171783.377267] usb 1-1.2: SerialNumber: 146950
>[171783.682357] asix 1-1.2:1.0: eth0: register 'asix' at usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet, 28:37:37:01:f1:d8
>[171784.486935] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[171786.318167] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[171786.320282] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
>[175273.415157] hid-generic 0005:1532:0014.000A: unknown main item tag 0x0
>[175273.415350] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input22
>[175273.415633] hid-generic 0005:1532:0014.000A: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[175671.665242] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[177465.627410] asix 1-1.2:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[207885.318540] [drm:__gen6_gt_force_wake_mt_get] *ERROR* Force wake wait timed out
>[209845.426174] wlan0: deauthenticating from 02:1a:11:fe:3c:00 by local choice (reason=3)
>[209845.471562] cfg80211: Calling CRDA to update world regulatory domain
>[209845.474065] cfg80211: World regulatory domain updated:
>[209845.474067] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[209845.474069] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[209845.474070] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[209845.474072] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[209845.474073] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[209845.474074] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[209845.474084] cfg80211: Calling CRDA for country: CA
>[209845.475075] cfg80211: Regulatory domain changed to country: CA
>[209845.475077] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[209845.475078] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[209845.475079] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[209845.475080] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[209845.475080] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[209845.475081] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[209846.119031] usb 1-1.4: USB disconnect, device number 28
>[209846.169558] PM: Syncing filesystems ... done.
>[209846.200404] PM: Preparing system for mem sleep
>[209846.294271] mmc0: card aaaa removed
>[209846.296235] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[209846.307323] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[209846.318439] PM: Entering mem sleep
>[209846.318521] Suspending console(s) (use no_console_suspend to debug)
>[209846.450418] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[209846.450504] sd 0:0:0:0: [sda] Stopping disk
>[209846.673554] ACPI handle has no context!
>[209846.675261] ACPI handle has no context!
>[209846.685136] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[209846.727101] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[209847.190104] PM: suspend of devices complete after 871.738 msecs
>[209847.190194] PM: late suspend of devices complete after 0.088 msecs
>[209847.201130] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[209847.211985] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[209847.212235] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[209847.222981] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[209847.234038] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[209847.244973] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[209847.245022] PM: noirq suspend of devices complete after 54.840 msecs
>[209847.245745] ACPI: Preparing to enter system sleep state S3
>[209847.294992] PM: Saving platform NVS memory
>[209847.297108] Disabling non-boot CPUs ...
>[209847.298436] smpboot: CPU 1 is now offline
>[209847.298819] CPU 1 offline: Remove Rx thread
>[209847.300125] smpboot: CPU 2 is now offline
>[209847.300458] CPU 2 offline: Remove Rx thread
>[209847.300755] Broke affinity for irq 42
>[209847.300757] Broke affinity for irq 43
>[209847.301772] smpboot: CPU 3 is now offline
>[209847.301952] CPU 3 offline: Remove Rx thread
>[209847.303258] smpboot: CPU 4 is now offline
>[209847.303585] CPU 4 offline: Remove Rx thread
>[209847.303867] Broke affinity for irq 16
>[209847.304892] smpboot: CPU 5 is now offline
>[209847.305098] CPU 5 offline: Remove Rx thread
>[209847.306380] smpboot: CPU 6 is now offline
>[209847.306571] CPU 6 offline: Remove Rx thread
>[209847.307833] smpboot: CPU 7 is now offline
>[209847.308032] CPU 7 offline: Remove Rx thread
>[209847.308171] Extended CMOS year: 2000
>[209847.310289] ACPI: Low-level resume complete
>[209847.310344] PM: Restoring platform NVS memory
>[209847.310898] Extended CMOS year: 2000
>[209847.311001] Enabling non-boot CPUs ...
>[209847.311100] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[209847.342735] bnx2i: CPU 1 online: Create Rx thread
>[209847.342777] CPU1 is up
>[209847.342835] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[209847.374718] bnx2i: CPU 2 online: Create Rx thread
>[209847.374753] CPU2 is up
>[209847.374819] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[209847.406727] bnx2i: CPU 3 online: Create Rx thread
>[209847.406744] CPU3 is up
>[209847.406780] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[209847.438710] bnx2i: CPU 4 online: Create Rx thread
>[209847.438725] CPU4 is up
>[209847.438759] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[209847.470693] bnx2i: CPU 5 online: Create Rx thread
>[209847.470718] CPU5 is up
>[209847.470751] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[209847.501684] bnx2i: CPU 6 online: Create Rx thread
>[209847.501710] CPU6 is up
>[209847.501741] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[209847.533674] bnx2i: CPU 7 online: Create Rx thread
>[209847.533701] CPU7 is up
>[209847.541297] ACPI: Waking up from system sleep state S3
>[209847.646677] i915 0000:00:02.0: power state changed by ACPI to D0
>[209847.657622] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[209847.668677] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[209847.701653] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[209847.712661] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[209847.723804] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[209847.734643] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[209847.756740] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[209847.778794] PM: noirq resume of devices complete after 132.224 msecs
>[209847.778842] PM: early resume of devices complete after 0.027 msecs
>[209847.778868] i915 0000:00:02.0: setting latency timer to 64
>[209847.778883] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[209847.778914] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[209847.778950] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[209847.778955] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[209847.778961] ahci 0000:00:1f.2: setting latency timer to 64
>[209847.779069] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[209847.779073] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[209847.779122] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[209847.810579] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[209847.816870] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[209848.010677] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[209848.096539] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[209848.096570] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[209848.096915] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[209848.096917] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[209848.097512] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[209848.097514] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[209848.097646] ata1.00: configured for UDMA/133
>[209848.097776] sd 0:0:0:0: [sda] Starting disk
>[209848.098652] ata5: SATA link down (SStatus 0 SControl 300)
>[209848.100253] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[209848.102494] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[209848.112943] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[209848.115324] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[209848.118641] ata2.00: configured for UDMA/100
>[209848.127143] Extended CMOS year: 2000
>[209848.330507] firewire_core 0000:02:00.3: rediscovered device fw0
>[209848.411952] PM: resume of devices complete after 633.289 msecs
>[209848.412043] PM: Finishing wakeup.
>[209848.412942] usb 1-1.2: USB disconnect, device number 29
>[209848.413026] asix 1-1.2:1.0: eth0: unregister 'asix' usb-0000:00:1a.0-1.2, ASIX AX88772 USB 2.0 Ethernet
>[209848.412044] Restarting tasks ... done.
>[209848.413585] video LNXVIDEO:00: Restoring backlight state
>[209848.570516] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[209848.649584] mmc0: new SDHC card at address aaaa
>[209848.649730] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[209848.651992]  mmcblk0: unknown partition table
>[209848.671423] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[209848.671685] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[209848.673253] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[209848.680085] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[209848.821861] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[209848.981396] usb 1-1.4: new full-speed USB device number 30 using ehci_hcd
>[209849.070350] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[209849.070357] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[209849.070360] usb 1-1.4: Product: BCM20702A0
>[209849.070364] usb 1-1.4: Manufacturer: Broadcom Corp
>[209849.070366] usb 1-1.4: SerialNumber: C01885DB015F
>[209851.611128] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[209851.611177] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[209855.823805] wlan0: authenticate with 00:1c:10:f5:47:57
>[209855.853986] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[209855.855895] wlan0: authenticated
>[209855.856186] wlan0: waiting for beacon from 00:1c:10:f5:47:57
>[209855.954171] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[209855.957600] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=4)
>[209855.960768] wlan0: associated
>[209855.960824] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[209865.106057] VFS: busy inodes on changed media or resized disk sr0
>[210616.672727] hid-generic 0005:1532:0014.000B: unknown main item tag 0x0
>[210616.672886] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input23
>[210616.673138] hid-generic 0005:1532:0014.000B: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F
>[228202.550070] PM: Syncing filesystems ... done.
>[228202.580533] PM: Preparing system for mem sleep
>[228202.649378] usb 1-1.4: USB disconnect, device number 30
>[228202.805803] mmc0: card aaaa removed
>[228202.810743] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[228202.832827] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[228202.843946] PM: Entering mem sleep
>[228202.844027] Suspending console(s) (use no_console_suspend to debug)
>[228202.977260] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[228202.977389] sd 0:0:0:0: [sda] Stopping disk
>[228203.198945] ACPI handle has no context!
>[228203.200736] ACPI handle has no context!
>[228203.210614] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[228203.252879] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[228203.723623] PM: suspend of devices complete after 879.784 msecs
>[228203.723709] PM: late suspend of devices complete after 0.085 msecs
>[228203.734588] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[228203.745444] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>[228203.745695] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[228203.756436] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>[228203.767497] xhci_hcd 0000:00:14.0: wake-up capability enabled by ACPI
>[228203.778432] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3hot
>[228203.778480] PM: noirq suspend of devices complete after 54.786 msecs
>[228203.779211] ACPI: Preparing to enter system sleep state S3
>[228203.828451] PM: Saving platform NVS memory
>[228203.830371] Disabling non-boot CPUs ...
>[228203.831995] smpboot: CPU 1 is now offline
>[228203.832255] CPU 1 offline: Remove Rx thread
>[228203.833554] smpboot: CPU 2 is now offline
>[228203.833870] CPU 2 offline: Remove Rx thread
>[228203.834164] Broke affinity for irq 43
>[228203.835177] smpboot: CPU 3 is now offline
>[228203.835366] CPU 3 offline: Remove Rx thread
>[228203.836661] smpboot: CPU 4 is now offline
>[228203.837001] CPU 4 offline: Remove Rx thread
>[228203.837230] Broke affinity for irq 16
>[228203.838262] smpboot: CPU 5 is now offline
>[228203.838427] CPU 5 offline: Remove Rx thread
>[228203.839697] smpboot: CPU 6 is now offline
>[228203.839900] CPU 6 offline: Remove Rx thread
>[228203.840150] Broke affinity for irq 42
>[228203.841173] smpboot: CPU 7 is now offline
>[228203.841356] CPU 7 offline: Remove Rx thread
>[228203.841505] Extended CMOS year: 2000
>[228203.843622] ACPI: Low-level resume complete
>[228203.843679] PM: Restoring platform NVS memory
>[228203.844237] Extended CMOS year: 2000
>[228203.844340] Enabling non-boot CPUs ...
>[228203.844439] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[228203.876198] bnx2i: CPU 1 online: Create Rx thread
>[228203.876238] CPU1 is up
>[228203.876299] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[228203.907196] bnx2i: CPU 2 online: Create Rx thread
>[228203.907213] CPU2 is up
>[228203.907249] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[228203.938190] bnx2i: CPU 3 online: Create Rx thread
>[228203.938207] CPU3 is up
>[228203.938245] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[228203.969174] bnx2i: CPU 4 online: Create Rx thread
>[228203.969191] CPU4 is up
>[228203.969227] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[228204.000155] bnx2i: CPU 5 online: Create Rx thread
>[228204.000183] CPU5 is up
>[228204.000218] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[228204.032157] bnx2i: CPU 6 online: Create Rx thread
>[228204.032174] CPU6 is up
>[228204.032209] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[228204.064148] bnx2i: CPU 7 online: Create Rx thread
>[228204.064165] CPU7 is up
>[228204.071781] ACPI: Waking up from system sleep state S3
>[228204.177135] i915 0000:00:02.0: power state changed by ACPI to D0
>[228204.188080] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
>[228204.199140] xhci_hcd 0000:00:14.0: wake-up capability disabled by ACPI
>[228204.232105] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>[228204.243118] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[228204.254268] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[228204.265109] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[228204.287185] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
>[228204.309237] PM: noirq resume of devices complete after 132.210 msecs
>[228204.309293] PM: early resume of devices complete after 0.034 msecs
>[228204.309318] i915 0000:00:02.0: setting latency timer to 64
>[228204.309331] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[228204.309368] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[228204.309386] ehci_hcd 0000:00:1a.0: setting latency timer to 64
>[228204.309406] mei 0000:00:16.0: irq 45 for MSI/MSI-X
>[228204.309414] ehci_hcd 0000:00:1d.0: setting latency timer to 64
>[228204.309423] ahci 0000:00:1f.2: setting latency timer to 64
>[228204.309538] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[228204.309574] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[228204.346524] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
>[228204.377008] tpm_tis 00:0a: TPM is disabled/deactivated (0x6)
>[228204.541157] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>[228204.626916] ata5: SATA link down (SStatus 0 SControl 300)
>[228204.626936] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[228204.629133] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[228204.629524] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[228204.629528] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[228204.630103] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[228204.630106] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[228204.630257] ata1.00: configured for UDMA/133
>[228204.630423] sd 0:0:0:0: [sda] Starting disk
>[228204.630508] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[228204.632842] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[228204.643299] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
>[228204.645557] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
>[228204.648946] ata2.00: configured for UDMA/100
>[228204.657585] Extended CMOS year: 2000
>[228204.860948] firewire_core 0000:02:00.3: rediscovered device fw0
>[228204.965464] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[228204.972164] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[228205.090004] PM: resume of devices complete after 780.957 msecs
>[228205.090113] PM: Finishing wakeup.
>[228205.090114] Restarting tasks ... done.
>[228205.092022] video LNXVIDEO:00: Restoring backlight state
>[228205.111570] wlan0: deauthenticated from 00:1c:10:f5:47:57 (Reason: 7)
>[228205.153821] cfg80211: Calling CRDA to update world regulatory domain
>[228205.155356] cfg80211: World regulatory domain updated:
>[228205.155359] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[228205.155360] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[228205.155362] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[228205.155363] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[228205.155364] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[228205.155365] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[228205.155376] cfg80211: Calling CRDA for country: CA
>[228205.156667] cfg80211: Regulatory domain changed to country: CA
>[228205.156669] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[228205.156671] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[228205.156673] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[228205.156675] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[228205.156676] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[228205.156678] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[228205.329946] mmc0: new SDHC card at address aaaa
>[228205.330141] mmcblk0: mmc0:aaaa SU04G 3.69 GiB 
>[228205.332503]  mmcblk0: unknown partition table
>[228205.492033] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[228205.511892] usb 1-1.4: new full-speed USB device number 31 using ehci_hcd
>[228205.592723] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
>[228205.592992] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
>[228205.594960] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>[228205.601728] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>[228205.602202] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[228205.602210] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[228205.602215] usb 1-1.4: Product: BCM20702A0
>[228205.602221] usb 1-1.4: Manufacturer: Broadcom Corp
>[228205.602225] usb 1-1.4: SerialNumber: C01885DB015F
>[228205.742759] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[228208.493376] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[228208.493433] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
>[228212.782575] wlan0: authenticate with 00:1c:10:f5:47:57
>[228212.819572] wlan0: send auth to 00:1c:10:f5:47:57 (try 1/3)
>[228212.821558] wlan0: authenticated
>[228212.822251] wlan0: associate with 00:1c:10:f5:47:57 (try 1/3)
>[228212.825641] wlan0: RX AssocResp from 00:1c:10:f5:47:57 (capab=0x411 status=0 aid=1)
>[228212.828538] wlan0: associated
>[228212.828592] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[228221.793593] VFS: busy inodes on changed media or resized disk sr0
>[228245.619923] VFS: busy inodes on changed media or resized disk sr0
>[228263.157289] hid-generic 0005:1532:0014.000C: unknown main item tag 0x0
>[228263.157450] input: Razer Orochi as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/input24
>[228263.157818] hid-generic 0005:1532:0014.000C: input,hidraw0: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on C0:18:85:DB:01:5F

Actions: View

Attachments on bug 872901: 637870 | 637871 | 637872 | 637873