Attachment 638228 Details for Bug 873015 – File: dmesg

File: dmesg

dmesg (text/plain), 189.53 KB, created by Suren Karapetyan on 2012-11-04 21:15:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Suren Karapetyan

Created: 2012-11-04 21:15:31 UTC

Size: 189.53 KB

patch

obsolete

>[    0.000000] BIOS-e820: [mem 0x00000000775ee000-0x000000007b3dbfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b3dc000-0x000000007b5dbfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007b5dc000-0x000000007b892fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b893000-0x000000007b89afff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007b89b000-0x000000007b8befff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b8bf000-0x000000007b8cefff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007b8cf000-0x000000007b9cefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007b9cf000-0x000000007b9fefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007b9ff000-0x000000007b9fffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ba00000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI 2.4 present.
>[    0.000000] DMI: Hewlett-Packard HP Compaq 6730b /30DD, BIOS 68PDD Ver. F.16 10/21/2010
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] No AGP bridge found
>[    0.000000] e820: last_pfn = 0x7ba00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 0775D0000 mask FFFFF0000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
>[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x7b9fffff]
>[    0.000000]  [mem 0x00000000-0x7b9fffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0x7b9fffff @ [mem 0x1fc20000-0x1fffffff]
>[    0.000000] RAMDISK: [mem 0x35cfa000-0x36e74fff]
>[    0.000000] ACPI: RSDP 00000000000f68c0 00024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 000000007b9fe120 0008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
>[    0.000000] ACPI: FACP 000000007b9fc000 000F4 (v03 HPQOEM 30DD     0000000F HP   00000001)
>[    0.000000] ACPI: DSDT 000000007b9dd000 197AD (v01 HPQOEM 30DD     00000001 INTL 20060912)
>[    0.000000] ACPI: FACS 000000007b99d000 00040
>[    0.000000] ACPI: HPET 000000007b9fb000 00038 (v01 HPQOEM 30DD     00000001 HP   00000001)
>[    0.000000] ACPI: APIC 000000007b9fa000 00084 (v01 HPQOEM 30DD     00000001 HP   00000001)
>[    0.000000] ACPI: MCFG 000000007b9f9000 0003C (v01 HPQOEM 30DD     00000001 HP   00000001)
>[    0.000000] ACPI: ASF! 000000007b9f8000 000A0 (v32 HPQOEM 30DD     00000001 HP   00000001)
>[    0.000000] ACPI: TCPA 000000007b9f7000 00032 (v02 HPQOEM 30DD     00000000 HP   00000001)
>[    0.000000] ACPI: SSDT 000000007b9da000 002DD (v01 HPQOEM SataAhci 00001000 INTL 20060912)
>[    0.000000] ACPI: SLIC 000000007b9d8000 00176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
>[    0.000000] ACPI: SSDT 000000007b9d7000 00059 (v01 HPQOEM   HPQNLP 00000001 INTL 20060912)
>[    0.000000] ACPI: DMAR 000000007b9d6000 000F8 (v01               ? 00000001      00000000)
>[    0.000000] ACPI: SSDT 000000007b9d5000 0066C (v01  PmRef    CpuPm 00003000 INTL 20060912)
>[    0.000000] ACPI: SSDT 000000007b9d4000 00288 (v01  PmRef  Cpu0Tst 00003000 INTL 20060912)
>[    0.000000] ACPI: SSDT 000000007b9d3000 00225 (v01  PmRef    ApTst 00003000 INTL 20060912)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007b9fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7b9fffff]
>[    0.000000]   NODE_DATA [mem 0x7b8ab000-0x7b8befff]
>[    0.000000]  [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880078a00000-ffff88007a9fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x775cffff]
>[    0.000000]   node   0: [mem 0x775e0000-0x775ebfff]
>[    0.000000]   node   0: [mem 0x775ee000-0x7b3dbfff]
>[    0.000000]   node   0: [mem 0x7b5dc000-0x7b892fff]
>[    0.000000]   node   0: [mem 0x7b89b000-0x7b8befff]
>[    0.000000]   node   0: [mem 0x7b9ff000-0x7b9fffff]
>[    0.000000] On node 0 totalpages: 505397
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 6 pages reserved
>[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7848 pages used for memmap
>[    0.000000]   DMA32 zone: 493566 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
>[    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000775d0000 - 00000000775e0000
>[    0.000000] PM: Registered nosave memory: 00000000775ec000 - 00000000775ee000
>[    0.000000] PM: Registered nosave memory: 000000007b3dc000 - 000000007b5dc000
>[    0.000000] PM: Registered nosave memory: 000000007b893000 - 000000007b89b000
>[    0.000000] PM: Registered nosave memory: 000000007b8bf000 - 000000007b8cf000
>[    0.000000] PM: Registered nosave memory: 000000007b8cf000 - 000000007b9cf000
>[    0.000000] PM: Registered nosave memory: 000000007b9cf000 - 000000007b9ff000
>[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007b600000 s84288 r8192 d22208 u524288
>[    0.000000] pcpu-alloc: s84288 r8192 d22208 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 497479
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.3-1.fc17.x86_64 root=/dev/mapper/vg_roadrunner-lv_root ro rd.lvm.lv=vg_roadrunner/lv_swap rd.md=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rd.lvm.lv=vg_roadrunner/lv_root rhgb quiet
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Memory: 1954240k/2025472k available (6307k kernel code, 3884k absent, 67348k reserved, 6895k data, 1028k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
>[    0.000000] NR_IRQS:8448 nr_irqs:712 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 8388608 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2260.928 MHz processor
>[    0.001004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.85 BogoMIPS (lpj=2260928)
>[    0.001007] pid_max: default: 32768 minimum: 301
>[    0.001043] Security Framework initialized
>[    0.001057] SELinux:  Initializing.
>[    0.001067] SELinux:  Starting in permissive mode
>[    0.002065] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.003372] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.003943] Mount-cache hash table entries: 256
>[    0.004225] Initializing cgroup subsys cpuacct
>[    0.004229] Initializing cgroup subsys memory
>[    0.004244] Initializing cgroup subsys devices
>[    0.004246] Initializing cgroup subsys freezer
>[    0.004248] Initializing cgroup subsys net_cls
>[    0.004249] Initializing cgroup subsys blkio
>[    0.004251] Initializing cgroup subsys perf_event
>[    0.004279] Disabled fast string operations
>[    0.004286] CPU: Physical Processor ID: 0
>[    0.004287] CPU: Processor Core ID: 0
>[    0.004289] mce: CPU supports 6 MCE banks
>[    0.004296] CPU0: Thermal monitoring handled by SMI
>[    0.004301] process: using mwait in idle threads
>[    0.004306] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.004306] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>[    0.004306] tlb_flushall_shift is 0xffffffff
>[    0.005346] ACPI: Core revision 20120711
>[    0.012704] ftrace: allocating 23438 entries in 92 pages
>[    0.019094] dmar: Host address width 36
>[    0.019098] dmar: DRHD base: 0x000000feb03000 flags: 0x0
>[    0.019108] dmar: IOMMU 0: reg_base_addr feb03000 ver 1:0 cap c9008020e30260 ecap 1000
>[    0.019109] dmar: DRHD base: 0x000000feb01000 flags: 0x0
>[    0.019114] dmar: IOMMU 1: reg_base_addr feb01000 ver 1:0 cap c0000020630260 ecap 1000
>[    0.019115] dmar: DRHD base: 0x000000feb02000 flags: 0x1
>[    0.019120] dmar: IOMMU 2: reg_base_addr feb02000 ver 1:0 cap c9008020630260 ecap 1000
>[    0.019121] dmar: RMRR base: 0x00000000000000 end: 0x00000000000000
>[    0.019123] dmar: RMRR base: 0x0000007bc00000 end: 0x0000007fffffff
>[    0.020195] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.030204] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
>[    0.030995] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>[    0.030995] ... version:                2
>[    0.030995] ... bit width:              40
>[    0.030995] ... generic registers:      2
>[    0.030995] ... value mask:             000000ffffffffff
>[    0.030995] ... max period:             000000007fffffff
>[    0.030995] ... fixed-purpose events:   3
>[    0.030995] ... event mask:             0000000700000003
>[    0.030995] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.001999] CPU1: Thermal monitoring handled by SMI
>[    0.030995] smpboot: Booting Node   0, Processors  #1
>[    0.043057] Brought up 2 CPUs
>[    0.043061] smpboot: Total of 2 processors activated (9043.71 BogoMIPS)
>[    0.045072] devtmpfs: initialized
>[    0.045179] PM: Registering ACPI NVS region [mem 0x775d0000-0x775dffff] (65536 bytes)
>[    0.045179] PM: Registering ACPI NVS region [mem 0x7b3dc000-0x7b5dbfff] (2097152 bytes)
>[    0.045179] PM: Registering ACPI NVS region [mem 0x7b8cf000-0x7b9cefff] (1048576 bytes)
>[    0.045179] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
>[    0.046232] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.046263] RTC time: 16:06:03, date: 11/04/12
>[    0.046309] NET: Registered protocol family 16
>[    0.046490] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.046492] ACPI: bus type pci registered
>[    0.046565] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.046568] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.077201] PCI: Using configuration type 1 for base access
>[    0.077299] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.077300] mtrr: probably your BIOS does not setup all CPUs.
>[    0.077301] mtrr: corrected configuration.
>[    0.078023] bio: create slab <bio-0> at 0
>[    0.078023] ACPI: Added _OSI(Module Device)
>[    0.078023] ACPI: Added _OSI(Processor Device)
>[    0.078023] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.078025] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.079916] ACPI: EC: Look up EC in DSDT
>[    0.090018] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.105484] ACPI: SSDT 000000007b8c7c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>[    0.105893] ACPI: Dynamic OEM Table Load:
>[    0.105896] ACPI: SSDT           (null) 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>[    0.106016] ACPI: SSDT 000000007b8c5618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.106411] ACPI: Dynamic OEM Table Load:
>[    0.106413] ACPI: SSDT           (null) 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.112202] ACPI: SSDT 000000007b8c6e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.112621] ACPI: Dynamic OEM Table Load:
>[    0.112624] ACPI: SSDT           (null) 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.115065] ACPI: SSDT 000000007b8c7f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.115468] ACPI: Dynamic OEM Table Load:
>[    0.115471] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.365003] ACPI: Interpreter enabled
>[    0.365007] ACPI: (supports S0 S3 S4 S5)
>[    0.365024] ACPI: Using IOAPIC for interrupt routing
>[    0.366517] ACPI: Power Resource [APPR] (off)
>[    0.376495] ACPI: Power Resource [COMP] (on)
>[    0.377525] ACPI: Power Resource [PFN0] (off)
>[    0.377575] ACPI: Power Resource [PFN1] (off)
>[    0.377621] ACPI: Power Resource [PFN2] (off)
>[    0.377670] ACPI: Power Resource [PFN3] (off)
>[    0.377716] ACPI: Power Resource [PFN4] (off)
>[    0.378416] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.378629] ACPI: No dock devices found.
>[    0.378634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.379290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.379827] PCI host bridge to bus 0000:00
>[    0.379831] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
>[    0.379833] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.379836] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.379837] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.379839] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.379841] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
>[    0.379843] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
>[    0.379845] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
>[    0.379854] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
>[    0.379875] DMAR: Forcing write-buffer flush capability
>[    0.379876] DMAR: Disabling IOMMU for graphics on this chipset
>[    0.379900] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
>[    0.379912] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
>[    0.379920] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    0.379925] pci 0000:00:02.0: reg 20: [io  0x60f0-0x60f7]
>[    0.379964] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
>[    0.379974] pci 0000:00:02.1: reg 10: [mem 0x90400000-0x904fffff 64bit]
>[    0.380063] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
>[    0.380119] pci 0000:00:1a.0: reg 20: [io  0x60c0-0x60df]
>[    0.380188] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
>[    0.380244] pci 0000:00:1a.1: reg 20: [io  0x60a0-0x60bf]
>[    0.380312] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
>[    0.380368] pci 0000:00:1a.2: reg 20: [io  0x6080-0x609f]
>[    0.380447] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
>[    0.380472] pci 0000:00:1a.7: reg 10: [mem 0x98906000-0x989063ff]
>[    0.380581] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.380617] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
>[    0.380638] pci 0000:00:1b.0: reg 10: [mem 0x98900000-0x98903fff 64bit]
>[    0.380734] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.380766] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
>[    0.380869] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.380902] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
>[    0.381010] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.381043] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
>[    0.381146] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.381182] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
>[    0.381284] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.381317] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
>[    0.381421] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.381455] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
>[    0.381512] pci 0000:00:1d.0: reg 20: [io  0x6060-0x607f]
>[    0.381580] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
>[    0.381636] pci 0000:00:1d.1: reg 20: [io  0x6040-0x605f]
>[    0.381704] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
>[    0.381760] pci 0000:00:1d.2: reg 20: [io  0x6020-0x603f]
>[    0.381840] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
>[    0.381865] pci 0000:00:1d.7: reg 10: [mem 0x98905000-0x989053ff]
>[    0.381979] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.382008] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.382099] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
>[    0.382268] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
>[    0.382296] pci 0000:00:1f.2: reg 10: [io  0x60e8-0x60ef]
>[    0.382306] pci 0000:00:1f.2: reg 14: [io  0x60fc-0x60ff]
>[    0.382317] pci 0000:00:1f.2: reg 18: [io  0x60e0-0x60e7]
>[    0.382328] pci 0000:00:1f.2: reg 1c: [io  0x60f8-0x60fb]
>[    0.382339] pci 0000:00:1f.2: reg 20: [io  0x6000-0x601f]
>[    0.382350] pci 0000:00:1f.2: reg 24: [mem 0x98904000-0x989047ff]
>[    0.382420] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.382501] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
>[    0.382504] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.382512] pci 0000:00:1c.0:   bridge window [mem 0x98800000-0x988fffff]
>[    0.382573] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>[    0.382609] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
>[    0.382649] pci 0000:02:00.0: reg 10: [mem 0x98700000-0x98701fff 64bit]
>[    0.382843] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.383964] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.383972] pci 0000:00:1c.1:   bridge window [mem 0x98700000-0x987fffff]
>[    0.384033] pci_bus 0000:03: busn_res: [bus 03-43] is inserted under [bus 00-ff]
>[    0.384037] pci 0000:00:1c.2: PCI bridge to [bus 03-43]
>[    0.384041] pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
>[    0.384046] pci 0000:00:1c.2:   bridge window [mem 0x94700000-0x986fffff]
>[    0.384106] pci_bus 0000:44: busn_res: [bus 44-84] is inserted under [bus 00-ff]
>[    0.384110] pci 0000:00:1c.4: PCI bridge to [bus 44-84]
>[    0.384114] pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
>[    0.384119] pci 0000:00:1c.4:   bridge window [mem 0x90700000-0x946fffff]
>[    0.384180] pci_bus 0000:85: busn_res: [bus 85] is inserted under [bus 00-ff]
>[    0.384294] pci 0000:85:00.0: [14e4:1693] type 00 class 0x020000
>[    0.384362] pci 0000:85:00.0: reg 10: [mem 0x90600000-0x9060ffff 64bit]
>[    0.384774] pci 0000:85:00.0: PME# supported from D3hot D3cold
>[    0.384923] pci 0000:00:1c.5: PCI bridge to [bus 85]
>[    0.384930] pci 0000:00:1c.5:   bridge window [mem 0x90600000-0x906fffff]
>[    0.384973] pci_bus 0000:86: busn_res: [bus 86] is inserted under [bus 00-ff]
>[    0.384993] pci 0000:86:02.0: [11c1:5811] type 00 class 0x0c0010
>[    0.385015] pci 0000:86:02.0: reg 10: [mem 0x90500000-0x90500fff]
>[    0.385109] pci 0000:86:02.0: supports D1 D2
>[    0.385111] pci 0000:86:02.0: PME# supported from D0 D1 D2 D3hot
>[    0.385173] pci 0000:00:1e.0: PCI bridge to [bus 86] (subtractive decode)
>[    0.385180] pci 0000:00:1e.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.385188] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.385189] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.385191] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.385193] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
>[    0.385195] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
>[    0.385197] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
>[    0.385235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.385355] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.385388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.385423] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>[    0.385478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>[    0.385531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>[    0.385586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.386015]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.387080]  pci0000:00: ACPI _OSC control (0x1d) granted
>[    0.393745] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.393792] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.393833] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.393873] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.393914] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.393960] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.394002] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.394043] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.394106] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.394106] vgaarb: loaded
>[    0.394106] vgaarb: bridge control possible 0000:00:02.0
>[    0.394106] SCSI subsystem initialized
>[    0.394106] ACPI: bus type scsi registered
>[    0.394106] libata version 3.00 loaded.
>[    0.394106] ACPI: bus type usb registered
>[    0.394106] usbcore: registered new interface driver usbfs
>[    0.394106] usbcore: registered new interface driver hub
>[    0.394106] usbcore: registered new device driver usb
>[    0.394106] PCI: Using ACPI for IRQ routing
>[    0.404267] PCI: pci_cache_line_size set to 64 bytes
>[    0.404361] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.404363] e820: reserve RAM buffer [mem 0x775d0000-0x77ffffff]
>[    0.404364] e820: reserve RAM buffer [mem 0x775ec000-0x77ffffff]
>[    0.404366] e820: reserve RAM buffer [mem 0x7b3dc000-0x7bffffff]
>[    0.404368] e820: reserve RAM buffer [mem 0x7b893000-0x7bffffff]
>[    0.404369] e820: reserve RAM buffer [mem 0x7b8bf000-0x7bffffff]
>[    0.404371] e820: reserve RAM buffer [mem 0x7ba00000-0x7bffffff]
>[    0.404472] NetLabel: Initializing
>[    0.404474] NetLabel:  domain hash size = 128
>[    0.404475] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.404486] NetLabel:  unlabeled traffic allowed by default
>[    0.404539] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>[    0.404544] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.404548] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.406952] Switching to clocksource hpet
>[    0.414539] pnp: PnP ACPI init
>[    0.414560] ACPI: bus type pnp registered
>[    0.414884] pnp 00:00: [bus 00-ff]
>[    0.414887] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.414889] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.414891] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.414893] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.414895] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.414897] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.414898] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.414900] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.414902] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.414903] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.414905] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.414907] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.414908] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.414910] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.414912] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.414913] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.414915] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.414917] pnp 00:00: [mem 0x80000000-0xdfffffff window]
>[    0.414919] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
>[    0.414921] pnp 00:00: [mem 0xfee01000-0xffffffff window]
>[    0.415049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.415119] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>[    0.415122] pnp 00:01: [mem 0xfed10000-0xfed13fff]
>[    0.415123] pnp 00:01: [mem 0xfed18000-0xfed18fff]
>[    0.415125] pnp 00:01: [mem 0xfed19000-0xfed19fff]
>[    0.415126] pnp 00:01: [mem 0xe0000000-0xefffffff]
>[    0.415128] pnp 00:01: [mem 0xfec00000-0xfec00fff]
>[    0.415133] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
>[    0.415134] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
>[    0.415191] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.415193] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.415196] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.415198] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.415200] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.415202] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.415204] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.415207] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.415210] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.415533] pnp 00:02: [io  0x0000-0x001f]
>[    0.415535] pnp 00:02: [io  0x0081-0x0091]
>[    0.415536] pnp 00:02: [io  0x0093-0x009f]
>[    0.415538] pnp 00:02: [io  0x00c0-0x00df]
>[    0.415540] pnp 00:02: [dma 4]
>[    0.415584] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.415592] pnp 00:03: [mem 0xff000000-0xffffffff]
>[    0.415634] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.415680] pnp 00:04: [io  0xfe00-0xfe0f]
>[    0.415681] pnp 00:04: [io  0xfe80-0xfe8f]
>[    0.415683] pnp 00:04: [mem 0xfed40000-0xfed44fff]
>[    0.415729] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
>[    0.415800] pnp 00:05: [mem 0xfed00000-0xfed003ff]
>[    0.415858] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.415861] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.415871] pnp 00:06: [io  0x00f0]
>[    0.415886] pnp 00:06: [irq 13]
>[    0.415932] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.415943] pnp 00:07: [io  0x002e-0x002f]
>[    0.415944] pnp 00:07: [io  0x004e-0x004f]
>[    0.415946] pnp 00:07: [io  0x0061]
>[    0.415947] pnp 00:07: [io  0x0063]
>[    0.415949] pnp 00:07: [io  0x0065]
>[    0.415950] pnp 00:07: [io  0x0067]
>[    0.415952] pnp 00:07: [io  0x0070]
>[    0.415953] pnp 00:07: [io  0x0080]
>[    0.415954] pnp 00:07: [io  0x0092]
>[    0.415956] pnp 00:07: [io  0x00b2-0x00b3]
>[    0.415957] pnp 00:07: [io  0x0200-0x027f]
>[    0.415959] pnp 00:07: [io  0x1000-0x1003]
>[    0.415960] pnp 00:07: [io  0x1010-0x101f]
>[    0.415962] pnp 00:07: [io  0xffff]
>[    0.415963] pnp 00:07: [io  0x0400-0x047f]
>[    0.415965] pnp 00:07: [io  0x0500-0x057f]
>[    0.415967] pnp 00:07: [io  0xef80-0xef9f]
>[    0.416043] system 00:07: [io  0x0200-0x027f] has been reserved
>[    0.416045] system 00:07: [io  0x1000-0x1003] has been reserved
>[    0.416047] system 00:07: [io  0x1010-0x101f] has been reserved
>[    0.416049] system 00:07: [io  0xffff] has been reserved
>[    0.416051] system 00:07: [io  0x0400-0x047f] has been reserved
>[    0.416053] system 00:07: [io  0x0500-0x057f] has been reserved
>[    0.416056] system 00:07: [io  0xef80-0xef9f] has been reserved
>[    0.416059] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.416067] pnp 00:08: [io  0x0070-0x0077]
>[    0.416072] pnp 00:08: [irq 8]
>[    0.416118] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.416461] pnp 00:09: [io  0x03f8-0x03ff]
>[    0.416468] pnp 00:09: [irq 4]
>[    0.416538] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
>[    0.416582] pnp 00:0a: [io  0x0060]
>[    0.416584] pnp 00:0a: [io  0x0064]
>[    0.416589] pnp 00:0a: [irq 1]
>[    0.416639] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.416650] pnp 00:0b: [irq 12]
>[    0.416698] pnp 00:0b: Plug and Play ACPI device, IDs SYN0141 SYN0100 SYN0002 PNP0f13 (active)
>[    0.416731] pnp 00:0c: [irq 23]
>[    0.416777] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
>[    0.416900] pnp: PnP ACPI: found 13 devices
>[    0.416901] ACPI: ACPI bus type pnp unregistered
>[    0.423821] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
>[    0.423826] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[    0.423836] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.423839] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.423851] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
>[    0.423861] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 44-84] add_size 200000
>[    0.423872] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 85] add_size 1000
>[    0.423874] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 85] add_size 200000
>[    0.423892] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.423894] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.423896] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.423898] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.423900] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.423902] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.423904] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.423906] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.423912] pci 0000:00:1c.0: BAR 15: assigned [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.423915] pci 0000:00:1c.1: BAR 15: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.423918] pci 0000:00:1c.2: BAR 15: assigned [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.423921] pci 0000:00:1c.4: BAR 15: assigned [mem 0x99000000-0x991fffff 64bit pref]
>[    0.423924] pci 0000:00:1c.5: BAR 15: assigned [mem 0x99200000-0x993fffff 64bit pref]
>[    0.423926] pci 0000:00:1c.0: BAR 13: assigned [io  0x7000-0x7fff]
>[    0.423929] pci 0000:00:1c.1: BAR 13: assigned [io  0x8000-0x8fff]
>[    0.423931] pci 0000:00:1c.5: BAR 13: assigned [io  0x9000-0x9fff]
>[    0.423934] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.423938] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
>[    0.423944] pci 0000:00:1c.0:   bridge window [mem 0x98800000-0x988fffff]
>[    0.423948] pci 0000:00:1c.0:   bridge window [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.423955] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.423959] pci 0000:00:1c.1:   bridge window [io  0x8000-0x8fff]
>[    0.423964] pci 0000:00:1c.1:   bridge window [mem 0x98700000-0x987fffff]
>[    0.423969] pci 0000:00:1c.1:   bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.423976] pci 0000:00:1c.2: PCI bridge to [bus 03-43]
>[    0.423979] pci 0000:00:1c.2:   bridge window [io  0x4000-0x5fff]
>[    0.423984] pci 0000:00:1c.2:   bridge window [mem 0x94700000-0x986fffff]
>[    0.423989] pci 0000:00:1c.2:   bridge window [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.423996] pci 0000:00:1c.4: PCI bridge to [bus 44-84]
>[    0.424009] pci 0000:00:1c.4:   bridge window [io  0x2000-0x3fff]
>[    0.424015] pci 0000:00:1c.4:   bridge window [mem 0x90700000-0x946fffff]
>[    0.424019] pci 0000:00:1c.4:   bridge window [mem 0x99000000-0x991fffff 64bit pref]
>[    0.424026] pci 0000:00:1c.5: PCI bridge to [bus 85]
>[    0.424029] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
>[    0.424035] pci 0000:00:1c.5:   bridge window [mem 0x90600000-0x906fffff]
>[    0.424039] pci 0000:00:1c.5:   bridge window [mem 0x99200000-0x993fffff 64bit pref]
>[    0.424046] pci 0000:00:1e.0: PCI bridge to [bus 86]
>[    0.424052] pci 0000:00:1e.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.424104] pci 0000:00:1e.0: setting latency timer to 64
>[    0.424109] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.424110] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.424112] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.424114] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff]
>[    0.424116] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.424118] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.424120] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
>[    0.424121] pci_bus 0000:01: resource 1 [mem 0x98800000-0x988fffff]
>[    0.424123] pci_bus 0000:01: resource 2 [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.424125] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
>[    0.424127] pci_bus 0000:02: resource 1 [mem 0x98700000-0x987fffff]
>[    0.424129] pci_bus 0000:02: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.424131] pci_bus 0000:03: resource 0 [io  0x4000-0x5fff]
>[    0.424133] pci_bus 0000:03: resource 1 [mem 0x94700000-0x986fffff]
>[    0.424135] pci_bus 0000:03: resource 2 [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.424137] pci_bus 0000:44: resource 0 [io  0x2000-0x3fff]
>[    0.424138] pci_bus 0000:44: resource 1 [mem 0x90700000-0x946fffff]
>[    0.424140] pci_bus 0000:44: resource 2 [mem 0x99000000-0x991fffff 64bit pref]
>[    0.424142] pci_bus 0000:85: resource 0 [io  0x9000-0x9fff]
>[    0.424144] pci_bus 0000:85: resource 1 [mem 0x90600000-0x906fffff]
>[    0.424146] pci_bus 0000:85: resource 2 [mem 0x99200000-0x993fffff 64bit pref]
>[    0.424148] pci_bus 0000:86: resource 1 [mem 0x90500000-0x905fffff]
>[    0.424150] pci_bus 0000:86: resource 4 [io  0x0000-0x0cf7]
>[    0.424152] pci_bus 0000:86: resource 5 [io  0x0d00-0xffff]
>[    0.424153] pci_bus 0000:86: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.424155] pci_bus 0000:86: resource 7 [mem 0x80000000-0xdfffffff]
>[    0.424157] pci_bus 0000:86: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.424159] pci_bus 0000:86: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.424197] NET: Registered protocol family 2
>[    0.424722] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>[    0.426731] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.427340] TCP: Hash tables configured (established 262144 bind 65536)
>[    0.427419] TCP: reno registered
>[    0.427429] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.427455] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.427603] NET: Registered protocol family 1
>[    0.427626] pci 0000:00:02.0: Boot video device
>[    0.427891] PCI: CLS 64 bytes, default 64
>[    0.427955] Unpacking initramfs...
>[    0.800273] Freeing initrd memory: 17900k freed
>[    0.811628] audit: initializing netlink socket (disabled)
>[    0.811649] type=2000 audit(1352045162.810:1): initialized
>[    0.830843] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.832527] VFS: Disk quotas dquot_6.5.2
>[    0.832570] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.832997] msgmni has been set to 3851
>[    0.833075] SELinux:  Registering netfilter hooks
>[    0.833589] alg: No test for stdrng (krng)
>[    0.833597] NET: Registered protocol family 38
>[    0.833633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.833665] io scheduler noop registered
>[    0.833667] io scheduler deadline registered
>[    0.833699] io scheduler cfq registered (default)
>[    0.833872] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    0.834042] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    0.834193] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>[    0.834343] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
>[    0.834496] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
>[    0.834621] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    0.834626] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    0.834646] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>[    0.834648] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>[    0.834653] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>[    0.834674] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>[    0.834679] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>[    0.834698] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
>[    0.834702] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
>[    0.834721] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
>[    0.834723] pci 0000:85:00.0: Signaling PME through PCIe PME interrupt
>[    0.834728] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
>[    0.834745] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.834824] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 0 ss_did 0
>[    0.834847] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
>[    0.834861] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 0 ss_did 0
>[    0.834876] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
>[    0.834889] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 0 ss_did 0
>[    0.834904] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
>[    0.834917] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 0 ss_did 0
>[    0.834939] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
>[    0.834952] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 0 ss_did 0
>[    0.834969] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
>[    0.834974] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.834976] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.835434] vesafb: mode is 1024x768x32, linelength=4096, pages=0
>[    0.835436] vesafb: scrolling: redraw
>[    0.835438] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.835848] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010900000, using 3072k, total 3072k
>[    0.835932] Console: switching to colour frame buffer device 128x48
>[    0.859939] fb0: VESA VGA frame buffer device
>[    0.859950] intel_idle: does not run on family 6 model 23
>[    0.860298] ACPI: AC Adapter [AC] (off-line)
>[    0.860497] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
>[    0.860501] ACPI: Sleep Button [SLPB]
>[    0.860542] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>[    0.860578] ACPI: Lid Switch [LID]
>[    0.860616] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.860621] ACPI: Power Button [PWRF]
>[    0.860700] ACPI: Fan [FAN0] (off)
>[    0.860744] ACPI: Fan [FAN1] (off)
>[    0.860788] ACPI: Fan [FAN2] (off)
>[    0.860832] ACPI: Fan [FAN3] (off)
>[    0.860873] ACPI: Fan [FAN4] (off)
>[    0.861087] ACPI: Requesting acpi_cpufreq
>[    0.863351] Monitor-Mwait will be used to enter C-1 state
>[    0.863356] Monitor-Mwait will be used to enter C-2 state
>[    0.863359] Monitor-Mwait will be used to enter C-3 state
>[    0.863362] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.863372] ACPI: acpi_idle registered with cpuidle
>[    0.875815] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.875818] ACPI: Thermal Zone [DTSZ] (35 C)
>[    0.881499] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.881502] ACPI: Thermal Zone [CPUZ] (36 C)
>[    0.884125] thermal LNXTHERM:02: registered as thermal_zone2
>[    0.884127] ACPI: Thermal Zone [SKNZ] (25 C)
>[    0.891792] thermal LNXTHERM:03: registered as thermal_zone3
>[    0.891794] ACPI: Thermal Zone [BATZ] (21 C)
>[    0.895560] thermal LNXTHERM:04: registered as thermal_zone4
>[    0.895562] ACPI: Thermal Zone [FDTZ] (24 C)
>[    0.895606] GHES: HEST is not enabled!
>[    0.895677] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.916353] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    0.937269] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    0.937616] Non-volatile memory driver v1.3
>[    0.937618] Linux agpgart interface v0.103
>[    0.937701] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
>[    0.937786] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    0.938885] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>[    0.939023] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>[    0.939834] loop: module loaded
>[    0.939908] ahci 0000:00:1f.2: version 3.0
>[    0.939969] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
>[    0.940028] ahci: SSS flag set, parallel bus scan disabled
>[    0.940060] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
>[    0.940063] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs 
>[    0.940068] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.944468] scsi0 : ahci
>[    0.944537] scsi1 : ahci
>[    0.944603] scsi2 : ahci
>[    0.944672] scsi3 : ahci
>[    0.944733] scsi4 : ahci
>[    0.944800] scsi5 : ahci
>[    0.944839] ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 45
>[    0.944841] ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 45
>[    0.944843] ata3: DUMMY
>[    0.944844] ata4: DUMMY
>[    0.944845] ata5: DUMMY
>[    0.944847] ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 45
>[    0.944918] libphy: Fixed MDIO Bus: probed
>[    0.944982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.945021] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[    0.945024] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[    0.945063] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    0.948961] ehci_hcd 0000:00:1a.7: debug port 1
>[    0.948969] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[    0.948983] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98906000
>[    0.954015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    0.954040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.954042] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.954044] usb usb1: Product: EHCI Host Controller
>[    0.954046] usb usb1: Manufacturer: Linux 3.6.3-1.fc17.x86_64 ehci_hcd
>[    0.954048] usb usb1: SerialNumber: 0000:00:1a.7
>[    0.954168] hub 1-0:1.0: USB hub found
>[    0.954172] hub 1-0:1.0: 6 ports detected
>[    0.954256] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    0.954259] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    0.954301] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    0.958209] ehci_hcd 0000:00:1d.7: debug port 1
>[    0.958217] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    0.958231] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98905000
>[    0.963916] ACPI: Battery Slot [BAT0] (battery present)
>[    0.963968] ACPI: Battery Slot [BAT1] (battery absent)
>[    0.964018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.964032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.964034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.964036] usb usb2: Product: EHCI Host Controller
>[    0.964038] usb usb2: Manufacturer: Linux 3.6.3-1.fc17.x86_64 ehci_hcd
>[    0.964040] usb usb2: SerialNumber: 0000:00:1d.7
>[    0.964142] hub 2-0:1.0: USB hub found
>[    0.964145] hub 2-0:1.0: 6 ports detected
>[    0.964214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.964227] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.964248] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    0.964252] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    0.964291] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    0.964325] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
>[    0.964356] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.964359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.964360] usb usb3: Product: UHCI Host Controller
>[    0.964362] usb usb3: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.964364] usb usb3: SerialNumber: 0000:00:1a.0
>[    0.964460] hub 3-0:1.0: USB hub found
>[    0.964466] hub 3-0:1.0: 2 ports detected
>[    0.964531] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    0.964535] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    0.964579] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    0.964612] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000060a0
>[    0.964643] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.964645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.964646] usb usb4: Product: UHCI Host Controller
>[    0.964648] usb usb4: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.964650] usb usb4: SerialNumber: 0000:00:1a.1
>[    0.964745] hub 4-0:1.0: USB hub found
>[    0.964749] hub 4-0:1.0: 2 ports detected
>[    0.964808] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    0.964811] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    0.964847] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    0.964881] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00006080
>[    0.964912] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.964914] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.964916] usb usb5: Product: UHCI Host Controller
>[    0.964918] usb usb5: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.964920] usb usb5: SerialNumber: 0000:00:1a.2
>[    0.965022] hub 5-0:1.0: USB hub found
>[    0.965026] hub 5-0:1.0: 2 ports detected
>[    0.965088] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    0.965092] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.965129] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    0.965156] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006060
>[    0.965187] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.965189] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.965191] usb usb6: Product: UHCI Host Controller
>[    0.965193] usb usb6: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.965195] usb usb6: SerialNumber: 0000:00:1d.0
>[    0.965289] hub 6-0:1.0: USB hub found
>[    0.965293] hub 6-0:1.0: 2 ports detected
>[    0.965352] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    0.965355] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.965395] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    0.965428] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006040
>[    0.965463] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.965465] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.965467] usb usb7: Product: UHCI Host Controller
>[    0.965468] usb usb7: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.965470] usb usb7: SerialNumber: 0000:00:1d.1
>[    0.965566] hub 7-0:1.0: USB hub found
>[    0.965569] hub 7-0:1.0: 2 ports detected
>[    0.965635] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    0.965638] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.965675] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    0.965700] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020
>[    0.965731] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.965733] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.965735] usb usb8: Product: UHCI Host Controller
>[    0.965736] usb usb8: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
>[    0.965738] usb usb8: SerialNumber: 0000:00:1d.2
>[    0.965829] hub 8-0:1.0: USB hub found
>[    0.965833] hub 8-0:1.0: 2 ports detected
>[    0.965923] usbcore: registered new interface driver usbserial
>[    0.965932] usbcore: registered new interface driver usbserial_generic
>[    0.965939] USB Serial support registered for generic
>[    0.965942] usbserial: USB Serial Driver core
>[    0.965976] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.967602] i8042: Detected active multiplexing controller, rev 1.1
>[    0.968271] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.968276] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.968299] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.968322] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.968342] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.968417] mousedev: PS/2 mouse device common for all mice
>[    0.968595] rtc_cmos 00:08: RTC can wake from S4
>[    0.968735] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>[    0.968764] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.968839] device-mapper: uevent: version 1.0.3
>[    0.968903] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    0.969013] cpuidle: using governor ladder
>[    0.969059] cpuidle: using governor menu
>[    0.969246] EFI Variables Facility v0.08 2004-May-17
>[    0.969332] usbcore: registered new interface driver usbhid
>[    0.969333] usbhid: USB HID core driver
>[    0.969355] drop_monitor: Initializing network drop monitor service
>[    0.969437] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.969480] TCP: cubic registered
>[    0.969483] Initializing XFRM netlink socket
>[    0.969587] NET: Registered protocol family 10
>[    0.969759] mip6: Mobile IPv6
>[    0.969762] NET: Registered protocol family 17
>[    0.970044] PM: Hibernation image not present or could not be loaded.
>[    0.970054] registered taskstats version 1
>[    0.970585]   Magic number: 4:93:135
>[    0.970705] rtc_cmos 00:08: setting system clock to 2012-11-04 16:06:03 UTC (1352045163)
>[    0.990322] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.250352] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.251471] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.251680] ata1.00: ATA-8: FUJITSU MHZ2160BH G2, 8909, max UDMA/100
>[    1.251690] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.252617] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.252766] ata1.00: configured for UDMA/100
>[    1.253205] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHZ2160B 8909 PQ: 0 ANSI: 5
>[    1.253618] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    1.253711] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.253752] sd 0:0:0:0: [sda] Write Protect is off
>[    1.253759] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.253818] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.279781]  sda: sda1 sda2
>[    1.280870] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.358296] usb 1-5: new high-speed USB device number 3 using ehci_hcd
>[    1.559291] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.584662] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.584675] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
>[    1.589427] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.589445] ata2.00: configured for UDMA/100
>[    1.704903] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T50L  SC04 PQ: 0 ANSI: 5
>[    1.714076] usb 4-1: new full-speed USB device number 2 using uhci_hcd
>[    1.815341] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    1.815350] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.815720] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.815944] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.253928] ACPI: Invalid Power Resource to register!
>[    1.816242] ACPI: Invalid Power Resource to register!<6>[    1.821170] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 470319
>[    1.861833] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
>[    1.871760] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
>[    1.871769] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    1.871775] usb 4-1: Product: Fingerprint Sensor
>[    2.121351] ata6: SATA link down (SStatus 0 SControl 300)
>[    2.125474] Freeing unused kernel memory: 1028k freed
>[    2.126027] Write protecting the kernel read-only data: 12288k
>[    2.141349] Freeing unused kernel memory: 1872k freed
>[    2.146469] Freeing unused kernel memory: 1420k freed
>[    2.193919] dracut: dracut-018-105.git20120927.fc17
>[    2.216357] dracut: rd.luks=0: removing cryptoluks activation
>[    2.233375] udevd[122]: starting version 182
>[    2.238074] hub 5-0:1.0: unable to enumerate USB device on port 1
>[    2.269584] [drm] Initialized drm 1.1.0 20060810
>[    2.281803] checking generic (80000000 300000) vs hw (80000000 10000000)
>[    2.281809] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    2.281831] Console: switching to colour dummy device 80x25
>[    2.281932] i915 0000:00:02.0: setting latency timer to 64
>[    2.321121] i915 0000:00:02.0: irq 46 for MSI/MSI-X
>[    2.321130] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    2.321132] [drm] Driver supports precise vblank timestamp query.
>[    2.321173] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.805218] fbcon: inteldrmfb (fb0) is primary device
>[    3.129296] Console: switching to colour frame buffer device 160x50
>[    3.136755] fb0: inteldrmfb frame buffer device
>[    3.136759] drm: registered panic notifier
>[    3.143151] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20120711/exoparg2-418)
>[    3.143177] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff880077f372f8), AE_AML_PACKAGE_LIMIT (20120711/psparse-536)
>[    3.143200] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20120711/video-1149)
>[    3.143221] video: probe of LNXVIDEO:00 failed with error 12299
>[    3.143344] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.154732] dracut: Starting plymouth daemon
>[    3.639883] dracut: rd.dm=0: removing DM RAID activation
>[    3.660764] dracut: rd.md=0: removing MD RAID activation
>[    3.729136] wmi: Mapper loaded
>[    3.745442] firewire_ohci 0000:86:02.0: setting latency timer to 64
>[    3.796145] firewire_ohci 0000:86:02.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    4.023640] dracut: Scanning devices sda2  for LVM logical volumes vg_roadrunner/lv_swap vg_roadrunner/lv_root
>[    4.032136] dracut: inactive '/dev/vg_roadrunner/lv_swap' [3.78 GiB] inherit
>[    4.032259] dracut: inactive '/dev/vg_roadrunner/lv_home' [94.75 GiB] inherit
>[    4.032370] dracut: inactive '/dev/vg_roadrunner/lv_root' [50.00 GiB] inherit
>[    4.297167] firewire_core 0000:86:02.0: created device fw0: GUID 5566779911223355, S400
>[    4.442226] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
>[    4.442230] EXT4-fs (dm-1): write access will be enabled during recovery
>[    4.685642] EXT4-fs (dm-1): orphan cleanup on readonly fs
>[    4.705472] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237488
>[    4.751060] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2244628
>[    4.768194] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257779
>[    4.788409] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2367102
>[    4.804107] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257813
>[    4.812647] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235039
>[    4.843119] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2232819
>[    4.855448] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253970
>[    4.874327] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2242907
>[    4.885551] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253522
>[    4.904747] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2242521
>[    4.904843] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254298
>[    4.912712] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254294
>[    4.917427] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253241
>[    4.918173] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2367156
>[    4.925362] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2249362
>[    4.925401] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2367082
>[    4.928916] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253227
>[    4.933320] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229532
>[    4.952627] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2239720
>[    4.952658] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2242919
>[    4.977870] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2238274
>[    4.998664] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2246899
>[    5.022570] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2231409
>[    5.022605] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2246737
>[    5.046687] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254448
>[    5.046714] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2232471
>[    5.046739] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257425
>[    5.055208] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253594
>[    5.055465] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229485
>[    5.055491] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229506
>[    5.076549] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2243461
>[    5.076603] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2243178
>[    5.076629] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254045
>[    5.088115] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2231106
>[    5.088143] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2244754
>[    5.108724] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2234318
>[    5.108751] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257763
>[    5.108774] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237542
>[    5.118541] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258697
>[    5.120673] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253665
>[    5.120698] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235210
>[    5.129771] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2366710
>[    5.158842] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2367817
>[    5.171260] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2247002
>[    5.184589] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2240998
>[    5.194478] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237361
>[    5.215428] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2498148
>[    5.241862] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2511181
>[    5.274799] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235963
>[    5.274829] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237087
>[    5.274852] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258691
>[    5.274873] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235288
>[    5.274904] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237952
>[    5.274937] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258690
>[    5.305693] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2245856
>[    5.305729] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257765
>[    5.305753] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257764
>[    5.305773] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253561
>[    5.305792] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257760
>[    5.305809] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253857
>[    5.305829] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258700
>[    5.314178] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2238698
>[    5.314206] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258687
>[    5.314240] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258681
>[    5.314265] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258680
>[    5.314297] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258678
>[    5.314320] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258677
>[    5.314334] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258676
>[    5.314350] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2232790
>[    5.314367] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257694
>[    5.316610] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258675
>[    5.316636] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2245763
>[    5.316661] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2249228
>[    5.316688] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2245642
>[    5.316704] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2244641
>[    5.336371] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229904
>[    5.351444] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2239249
>[    5.351473] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235921
>[    5.351495] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2235249
>[    5.351525] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258707
>[    5.351546] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2238631
>[    5.367724] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2236701
>[    5.382496] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2244354
>[    5.382534] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2244279
>[    5.382559] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257741
>[    5.382587] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257503
>[    5.382621] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257671
>[    5.382698] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257669
>[    5.387297] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229021
>[    5.387334] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229542
>[    5.387364] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257840
>[    5.387395] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254060
>[    5.412636] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2240230
>[    5.436817] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258085
>[    5.436845] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258081
>[    5.436873] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2239523
>[    5.436899] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2239555
>[    5.436920] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2238364
>[    5.436949] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2236937
>[    5.436970] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257834
>[    5.458953] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2233657
>[    5.459051] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258683
>[    5.459090] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2233428
>[    5.459134] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257635
>[    5.459158] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257634
>[    5.459172] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257632
>[    5.459193] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257807
>[    5.459213] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257800
>[    5.459228] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257693
>[    5.459242] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257683
>[    5.459258] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257658
>[    5.459275] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2231592
>[    5.459299] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257655
>[    5.459316] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257491
>[    5.459337] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257469
>[    5.482808] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256637
>[    5.487133] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257272
>[    5.487201] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257190
>[    5.507561] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254449
>[    5.507592] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257733
>[    5.529472] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2230635
>[    5.529498] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2237430
>[    5.538683] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256851
>[    5.538726] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257654
>[    5.538745] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257651
>[    5.538769] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257646
>[    5.538804] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256733
>[    5.551071] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2232242
>[    5.551104] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229541
>[    5.551133] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256730
>[    5.551152] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256729
>[    5.551171] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254350
>[    5.551198] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256921
>[    5.551250] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2256844
>[    5.559855] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254277
>[    5.559893] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254233
>[    5.559937] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254201
>[    5.559959] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254152
>[    5.559977] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253935
>[    5.559996] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2246833
>[    5.577913] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2243674
>[    5.578038] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254331
>[    5.578057] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2242417
>[    5.578075] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258652
>[    5.578096] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254125
>[    5.578111] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2258648
>[    5.600965] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254236
>[    5.600986] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254235
>[    5.601034] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254227
>[    5.601048] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254219
>[    5.601064] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254110
>[    5.601080] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254192
>[    5.601095] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2254127
>[    5.601115] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2238749
>[    5.601134] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253934
>[    5.601147] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253928
>[    5.601176] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2229575
>[    5.601192] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2257762
>[    5.601206] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253669
>[    5.601224] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253422
>[    5.601254] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 2253755
>[    5.604368] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 1048658
>[    5.605077] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 1048809
>[    5.605130] EXT4-fs (dm-1): ext4_orphan_cleanup: deleting unreferenced inode 1048701
>[    5.605150] EXT4-fs (dm-1): 165 orphan inodes deleted
>[    5.605154] EXT4-fs (dm-1): recovery complete
>[    6.107401] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    6.237798] dracut: Checking ext4: /dev/mapper/vg_roadrunner-lv_root
>[    6.238278] dracut: issuing e2fsck -a  /dev/mapper/vg_roadrunner-lv_root
>[    6.326661] dracut: /dev/mapper/vg_roadrunner-lv_root: clean, 290464/3276800 files, 3404001/13107200 blocks
>[    6.328290] dracut: Remounting /dev/mapper/vg_roadrunner-lv_root with -o ro
>[    6.398495] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    6.461883] dracut: Mounted root filesystem /dev/mapper/vg_roadrunner-lv_root
>[    6.702169] dracut: Switching root
>[    7.749899] type=1404 audit(1352045170.278:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    7.928011] SELinux: 2048 avtab hash slots, 103172 rules.
>[    7.945574] SELinux: 2048 avtab hash slots, 103172 rules.
>[    8.094550] SELinux:  9 users, 15 roles, 4212 types, 229 bools, 1 sens, 1024 cats
>[    8.094554] SELinux:  83 classes, 103172 rules
>[    8.098068] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    8.098070] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    8.098075] SELinux: the above unknown classes and permissions will be allowed
>[    8.098085] SELinux:  Completing initialization.
>[    8.098086] SELinux:  Setting up existing superblocks.
>[    8.098092] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    8.098097] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    8.098114] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    8.098118] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    8.098126] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.098148] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    8.098651] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    8.098654] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    8.100572] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    8.100581] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    8.100584] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    8.100600] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    8.100608] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    8.100614] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    8.100638] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    8.101739] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.101747] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.101780] SELinux: initialized (dev dm-1, type ext4), uses xattr
>[    8.101970] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    8.120783] type=1403 audit(1352045170.648:3): policy loaded auid=4294967295 ses=4294967295
>[    8.134101] systemd[1]: Successfully loaded SELinux policy in 438ms 757us.
>[    8.242149] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    8.247232] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.300928] systemd[1]: Relabelled /dev and /run in 53ms 581us.
>[    8.324097] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.329316] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.334393] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.342331] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.351290] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.359288] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.368364] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.376291] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    8.376683] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    8.398807] systemd[1]: Set hostname to <roadrunner.local>.
>[    9.635711] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[   11.149185] udevd[372]: starting version 182
>[   11.293183] systemd-journald[368]: Fixed max_use=96.5M max_size=12.0M min_size=64.0K keep_free=48.2M
>[   11.484654] systemd-journald[368]: Vacuuming...
>[   13.721366] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[   13.721733] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[   13.722092] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   13.895615] EXT4-fs (dm-1): re-mounted. Opts: (null)
>[   15.307759] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[   15.610991] hp_accel: hardware type NC6730b found
>[   15.611602] lis3lv02d: 8 bits sensor found
>[   15.649092] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input5
>[   15.650647] Registered led device: hp::hddprotect
>[   15.650678] hp_accel: driver loaded
>[   15.655945] cfg80211: Calling CRDA to update world regulatory domain
>[   15.659636] tg3.c:v3.124 (March 21, 2012)
>[   15.662749] Intel(R) Wireless WiFi driver for Linux, in-tree:d
>[   15.662752] Copyright(c) 2003-2012 Intel Corporation
>[   15.662819] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
>[   15.662821] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900108e4000
>[   15.662823] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
>[   15.662915] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
>[   15.667852] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[   15.667959] tg3 0000:85:00.0: eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:1f:29:a9:f7:62
>[   15.667962] tg3 0000:85:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>[   15.667965] tg3 0000:85:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[   15.667967] tg3 0000:85:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[   15.695787] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
>[   15.811158] input: HP WMI hotkeys as /devices/virtual/input/input6
>[   15.956345] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
>[   15.964302] iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
>[   15.964306] iwldvm: Copyright(c) 2003-2012 Intel Corporation
>[   15.964331] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
>[   15.964333] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
>[   15.964335] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   15.964336] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>[   15.964338] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
>[   15.964340] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
>[   15.964401] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[   15.986294] iwlwifi 0000:02:00.0: device EEPROM VER=0x11f, CALIB=0x4
>[   15.986298] iwlwifi 0000:02:00.0: Device SKU: 0xF0
>[   15.986300] iwlwifi 0000:02:00.0: Valid Tx ant: 0x2, Valid Rx ant: 0x3
>[   15.986385] Registered led device: phy0-led
>[   15.990170] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   16.056578] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
>[   16.056591] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   16.056596] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
>[   16.056599] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   16.056601] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   16.058115] iTCO_vendor_support: vendor-support=0
>[   16.058317] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   16.058349] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
>[   16.058577] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   16.111582] tun: Universal TUN/TAP device driver, 1.6
>[   16.111586] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   16.137112] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
>[   16.142036] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
>[   16.143895] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
>[   16.149888] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   16.539640] WARNING! power/level is deprecated; use power/control instead
>[   16.986618] cfg80211: World regulatory domain updated:
>[   16.986622] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   16.986623] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.986625] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.986627] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   16.986628] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   16.986629] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   17.526284] cfg80211: Calling CRDA for country: AM
>[   17.529457] cfg80211: Regulatory domain changed to country: AM
>[   17.529461] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   17.529463] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   17.529465] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[   17.529466] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[   18.340246] Adding 3964924k swap on /dev/mapper/vg_roadrunner-lv_swap.  Priority:0 extents:1 across:3964924k 
>[   22.494520] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[   22.514690] SELinux: initialized (dev sda1, type ext4), uses xattr
>[   30.484169] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   30.484182] SELinux: initialized (dev dm-2, type ext4), uses xattr
>[   30.909089] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   30.916282] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   30.926959] Loading iSCSI transport class v2.0-870.
>[   30.929597] iscsi: registered transport (tcp)
>[   30.938860] iscsi: registered transport (iser)
>[   30.941534] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>[   30.941539] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>[   30.943133] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>[   30.943160] iscsi: registered transport (cxgb3i)
>[   30.948183] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
>[   30.948279] iscsi: registered transport (cxgb4i)
>[   30.950535] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
>[   30.951524] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
>[   30.951553] iscsi: registered transport (bnx2i)
>[   30.955812] iscsi: registered transport (be2iscsi)
>[   31.795007] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[   31.798554] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   31.813967] Bluetooth: Core ver 2.16
>[   31.814346] NET: Registered protocol family 31
>[   31.814348] Bluetooth: HCI device and connection manager initialized
>[   31.814350] Bluetooth: HCI socket layer initialized
>[   31.814352] Bluetooth: L2CAP socket layer initialized
>[   31.814356] Bluetooth: SCO socket layer initialized
>[   31.859962] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   31.859966] Bluetooth: BNEP filters: protocol multicast
>[   31.914213] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[   31.917462] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   31.941878] RPC: Registered named UNIX socket transport module.
>[   31.941881] RPC: Registered udp transport module.
>[   31.941882] RPC: Registered tcp transport module.
>[   31.941883] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[   31.980063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   32.066386] tg3 0000:85:00.0: irq 49 for MSI/MSI-X
>[   32.100181] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[   32.236216] Ebtables v2.0 registered
>[   32.942191] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   32.942271] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   32.963267] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[   32.963318] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[   34.815716] wlan0: authenticate with 00:25:68:b1:ea:cf
>[   34.816975] wlan0: send auth to 00:25:68:b1:ea:cf (try 1/3)
>[   34.819711] wlan0: authenticated
>[   34.821028] wlan0: associate with 00:25:68:b1:ea:cf (try 1/3)
>[   34.823469] wlan0: RX AssocResp from 00:25:68:b1:ea:cf (capab=0x421 status=0 aid=2)
>[   34.824997] wlan0: associated
>[   34.825079] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   43.017408] fuse init (API version 7.20)
>[   43.037573] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   43.063872] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[  164.774467] sock: process `skype' is using obsolete setsockopt SO_BSDCOMPAT
>[  328.768212] usb 1-5: new high-speed USB device number 4 using ehci_hcd
>[  329.255365] usb 1-5: new high-speed USB device number 5 using ehci_hcd
>[  329.665093] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  345.101351] usb 1-5: new high-speed USB device number 6 using ehci_hcd
>[  345.255995] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[  345.256053] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[  345.256060] usb 1-5: Product: CKF7037
>[  345.256070] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[  345.256080] usb 1-5: SerialNumber: SN0001
>[  345.407025] Linux media interface: v0.10
>[  345.416894] Linux video capture interface: v2.00
>[  345.453676] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[  345.470595] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
>[  345.471030] usbcore: registered new interface driver uvcvideo
>[  345.471033] USB Video Class driver (1.1.1)
>[  708.213048] usb 1-5: reset high-speed USB device number 6 using ehci_hcd
>[  708.363068] usb 1-5: USB disconnect, device number 6
>[  708.423386] hub 1-0:1.0: unable to enumerate USB device on port 5
>[  744.975114] wlan0: deauthenticating from 00:25:68:b1:ea:cf by local choice (reason=3)
>[  744.987222] cfg80211: Calling CRDA to update world regulatory domain
>[  745.173678] cfg80211: World regulatory domain updated:
>[  745.173682] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  745.173684] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  745.173686] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  745.173687] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  745.173689] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  745.173690] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  745.173700] cfg80211: Calling CRDA for country: AM
>[  745.176756] cfg80211: Regulatory domain changed to country: AM
>[  745.176759] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  745.176761] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  745.176763] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[  745.176764] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[  745.302030] usb 1-5: new high-speed USB device number 8 using ehci_hcd
>[  745.838030] usb 1-5: device not accepting address 8, error -71
>[  745.940044] usb 1-5: new high-speed USB device number 9 using ehci_hcd
>[  746.245098] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  746.729108] usb 1-5: new high-speed USB device number 10 using ehci_hcd
>[  747.138083] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  748.318053] usb 1-5: new high-speed USB device number 11 using ehci_hcd
>[  748.471042] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[  748.471047] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[  748.471050] usb 1-5: Product: CKF7037
>[  748.471053] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[  748.471055] usb 1-5: SerialNumber: SN0001
>[  748.473713] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[  748.105871] PM: Syncing filesystems ... done.
>[  748.477971] PM: Preparing system for mem sleep
>[  748.490288] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input8
>[  748.521148] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[  748.554139] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  748.565144] PM: Entering mem sleep
>[  748.565373] Suspending console(s) (use no_console_suspend to debug)
>[  748.565762] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  748.565936] sd 0:0:0:0: [sda] Stopping disk
>[  748.611699] serial 00:09: disabled
>[  748.611776] ACPI handle has no context!
>[  748.612026] pciehp 0000:00:1c.5:pcie04: pciehp_suspend ENTRY
>[  748.612054] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
>[  748.612066] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
>[  748.612068] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[  748.612078] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[  748.724075] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[  749.482256] PM: suspend of devices complete after 916.615 msecs
>[  749.482416] PM: late suspend of devices complete after 0.158 msecs
>[  749.493151] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  749.504121] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[  749.504212] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[  749.504300] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  749.504342] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  749.515115] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
>[  749.515207] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[  749.515297] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  749.515346] PM: noirq suspend of devices complete after 32.927 msecs
>[  749.515728] ACPI: Preparing to enter system sleep state S3
>[  749.521139] PM: Saving platform NVS memory
>[  749.542162] Disabling non-boot CPUs ...
>[  749.543517] smpboot: CPU 1 is now offline
>[  749.544062] CPU 1 offline: Remove Rx thread
>[  749.544239] Extended CMOS year: 2000
>[  749.544239] ACPI: Low-level resume complete
>[  749.544239] PM: Restoring platform NVS memory
>[  749.544239] Extended CMOS year: 2000
>[  749.544239] CPU0: Thermal monitoring handled by SMI
>[  749.544239] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
>[  749.550118] Enabling non-boot CPUs ...
>[  749.550208] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  749.543005] Disabled fast string operations
>[  749.543005] CPU1: Thermal monitoring handled by SMI
>[  749.563005] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
>[  749.568019] bnx2i: CPU 1 online: Create Rx thread
>[  749.569021] CPU1 is up
>[  749.572152] ACPI: Waking up from system sleep state S3
>[  749.623145] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  749.623227] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[  749.623307] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
>[  749.634074] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  749.639028] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[  749.650529] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  749.650607] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[  749.650684] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[  749.661074] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  749.705205] PM: noirq resume of devices complete after 92.406 msecs
>[  749.705326] PM: early resume of devices complete after 0.073 msecs
>[  749.705354] i915 0000:00:02.0: setting latency timer to 64
>[  749.705399] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  749.705425] usb usb3: root hub lost power or was reset
>[  749.705440] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[  749.705466] usb usb4: root hub lost power or was reset
>[  749.705481] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[  749.705505] usb usb5: root hub lost power or was reset
>[  749.705522] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  749.705591] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[  749.705648] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[  749.705657] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[  749.705665] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
>[  749.705673] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
>[  749.705681] pciehp 0000:00:1c.5:pcie04: pciehp_resume ENTRY
>[  749.705690] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  749.705715] usb usb6: root hub lost power or was reset
>[  749.705730] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  749.705755] usb usb7: root hub lost power or was reset
>[  749.705769] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  749.705794] usb usb8: root hub lost power or was reset
>[  749.705810] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  749.705831] pci 0000:00:1e.0: setting latency timer to 64
>[  749.705844] ahci 0000:00:1f.2: setting latency timer to 64
>[  749.874374] serial 00:09: activated
>[  749.950205] usb 1-5: reset high-speed USB device number 11 using ehci_hcd
>[  750.078057] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  750.080057] ata6: SATA link down (SStatus 0 SControl 300)
>[  750.081803] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  750.086601] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  750.086604] ata2.00: configured for UDMA/100
>[  750.202073] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
>[  750.257064] firewire_core 0000:86:02.0: rediscovered device fw0
>[  751.453192] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  751.454072] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  751.636831] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  751.636954] ata1.00: configured for UDMA/100
>[  751.637024] sd 0:0:0:0: [sda] Starting disk
>[  751.821305] PM: resume of devices complete after 2115.975 msecs
>[  751.821498] PM: Finishing wakeup.
>[  751.821499] Restarting tasks ... done.
>[  751.977071] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  751.977102] usb 1-5: USB disconnect, device number 11
>[  752.107227] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[  752.114859] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[  752.155694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  752.164263] tg3 0000:85:00.0: irq 49 for MSI/MSI-X
>[  752.198594] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[  754.936432] wlan0: authenticate with 00:25:68:b1:ea:cf
>[  754.937782] wlan0: send auth to 00:25:68:b1:ea:cf (try 1/3)
>[  754.940485] wlan0: authenticated
>[  754.941188] wlan0: associate with 00:25:68:b1:ea:cf (try 1/3)
>[  754.943913] wlan0: RX AssocResp from 00:25:68:b1:ea:cf (capab=0x421 status=0 aid=2)
>[  754.945510] wlan0: associated
>[  754.945568] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  814.174066] usb 1-5: new high-speed USB device number 12 using ehci_hcd
>[  814.479110] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  972.845092] usb 1-5: new high-speed USB device number 13 using ehci_hcd
>[  973.150118] hub 5-0:1.0: unable to enumerate USB device on port 1
>[  973.895131] usb 1-5: new high-speed USB device number 14 using ehci_hcd
>[  974.359134] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 1160.526227] usb 2-4: new high-speed USB device number 2 using ehci_hcd
>[ 1160.696997] usb 2-4: New USB device found, idVendor=03f0, idProduct=0423
>[ 1160.697039] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[ 1160.697054] usb 2-4: Product: HP Flash Media Reader
>[ 1160.697060] usb 2-4: Manufacturer: HP
>[ 1160.697064] usb 2-4: SerialNumber: 070706100002
>[ 1160.961943] Initializing USB Mass Storage driver...
>[ 1160.962223] scsi6 : usb-storage 2-4:1.0
>[ 1160.962370] usbcore: registered new interface driver usb-storage
>[ 1160.962372] USB Mass Storage support registered.
>[ 1161.974922] scsi 6:0:0:0: Direct-Access     HP       USB20 HS-COMBO   5.58 PQ: 0 ANSI: 0
>[ 1161.977360] sd 6:0:0:0: Attached scsi generic sg2 type 0
>[ 1162.366764] sd 6:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
>[ 1162.371212] sd 6:0:0:0: [sdb] Write Protect is off
>[ 1162.371222] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
>[ 1162.375712] sd 6:0:0:0: [sdb] No Caching mode page present
>[ 1162.375722] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[ 1162.397942] sd 6:0:0:0: [sdb] No Caching mode page present
>[ 1162.397955] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[ 1162.403480]  sdb: sdb1
>[ 1162.424964] sd 6:0:0:0: [sdb] No Caching mode page present
>[ 1162.424977] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[ 1162.424984] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[ 1205.071294] usb 1-5: new high-speed USB device number 15 using ehci_hcd
>[ 1205.376329] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 1205.612118] usb 1-5: new high-speed USB device number 16 using ehci_hcd
>[ 1206.109328] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 1206.497312] usb 1-5: new high-speed USB device number 17 using ehci_hcd
>[ 1206.650254] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[ 1206.650265] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[ 1206.650271] usb 1-5: Product: CKF7037
>[ 1206.650276] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[ 1206.650281] usb 1-5: SerialNumber: SN0001
>[ 1206.653212] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[ 1206.670217] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input9
>[ 1236.940241] usb 1-5: reset high-speed USB device number 17 using ehci_hcd
>[ 1236.992436] usb 1-5: USB disconnect, device number 17
>[ 1237.051291] hub 1-0:1.0: unable to enumerate USB device on port 5
>[ 1237.289072] usb 1-5: new high-speed USB device number 19 using ehci_hcd
>[ 1237.595237] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 1315.172083] usb 1-5: new high-speed USB device number 20 using ehci_hcd
>[ 1315.325317] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[ 1315.325327] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[ 1315.325333] usb 1-5: Product: CKF7037
>[ 1315.325338] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[ 1315.325343] usb 1-5: SerialNumber: SN0001
>[ 1315.328509] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[ 1315.345412] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input10
>[ 1326.378093] usb 1-5: reset high-speed USB device number 20 using ehci_hcd
>[ 1326.441268] usb 1-5: USB disconnect, device number 20
>[ 1326.656112] usb 1-5: new high-speed USB device number 21 using ehci_hcd
>[ 1326.961122] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 1328.277250] usb 1-5: new high-speed USB device number 22 using ehci_hcd
>[ 1328.430073] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[ 1328.430083] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[ 1328.430089] usb 1-5: Product: CKF7037
>[ 1328.430095] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[ 1328.430100] usb 1-5: SerialNumber: SN0001
>[ 1328.432888] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[ 1328.449900] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input11
>[ 1433.430813] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>[ 2019.149065] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.152014] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.154761] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.157478] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.159982] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.161440] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2019.363010] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.365782] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.368323] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.370774] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.373241] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.374731] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2019.576097] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.578806] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.581526] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.584365] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.587105] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.588604] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2019.790061] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.792746] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.795411] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.798112] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.801049] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2019.802905] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.004029] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.006623] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.009085] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.011878] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.014349] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.015826] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.015828] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2020.067021] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.069699] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.073011] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.076207] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.078874] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.080533] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.282033] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.284726] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.287406] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.290232] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.292874] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.294549] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.496056] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.499009] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.502027] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.504742] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.508009] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.509609] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.711034] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.713705] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.716462] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.719150] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.722464] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.724156] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.926044] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.928722] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.931446] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.934093] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.936743] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.938270] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2020.938280] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2020.990038] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.992744] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.995416] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2020.998085] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.000750] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.002558] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2021.204043] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.206745] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.209427] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.212154] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.215007] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.216511] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2021.418030] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.420710] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.424240] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.426206] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.428732] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.430211] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2021.632012] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.635104] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.637717] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.640225] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.644234] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.644751] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2021.846103] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.848778] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.851461] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.854112] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.856864] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.858460] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2021.858463] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2021.910045] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.912699] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.915371] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.917865] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.920318] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2021.922384] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2022.124070] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.126744] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.129425] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.132081] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.135109] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.136604] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2022.338080] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.341250] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.343592] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.346267] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.348794] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.350241] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2022.552022] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.554722] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.557374] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.560036] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.562679] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.564427] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2022.766099] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.768776] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.771465] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.774188] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.776832] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.778330] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2022.778340] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2022.778361] usb 1-5: USB disconnect, device number 22
>[ 2022.839079] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.841830] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.844521] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.847201] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.849708] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2022.851156] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.053053] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.055724] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.058426] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.061067] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.064195] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.065699] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.267022] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.269705] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.272433] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.275152] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.278010] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.280370] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.482022] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.484707] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.487379] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.490093] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.492742] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.494423] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.696021] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.698716] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.701376] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.705012] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.707654] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.709114] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.709124] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2023.761046] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.763698] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.766374] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.768874] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.771354] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.772876] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2023.974108] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.976776] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.979560] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.982214] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.984877] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2023.986613] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2024.188034] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.190508] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.192962] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.195407] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.197856] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.199347] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2024.401091] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.403765] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.406583] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.409083] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.411695] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.413154] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2024.615022] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.617711] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.620459] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.623131] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.626006] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.627484] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2024.627487] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2024.679039] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.681503] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.683951] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.686388] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.688923] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.690373] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2024.892044] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.894880] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.897590] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.900193] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.902654] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2024.904155] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2025.106097] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.108766] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.111456] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.115013] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.117651] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.119112] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2025.321067] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.323738] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.326433] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.329100] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.331780] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.333436] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2025.535071] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.537744] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.540417] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.543114] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.545776] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.547267] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2025.547277] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2025.599045] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.601712] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.604394] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.607049] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.609670] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.611201] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2025.813079] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.815744] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.819035] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.821796] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.824611] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2025.826290] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2026.028023] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.030802] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.033456] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.036421] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.039203] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.040867] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2026.242078] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.244747] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.247424] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.249963] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.252408] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.253945] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2026.455010] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.457706] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.460416] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.463101] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.465748] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2026.467236] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2026.467248] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2026.467261] hub 1-0:1.0: unable to enumerate USB device on port 5
>[ 2026.651202] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2206.280078] usb 5-1: new low-speed USB device number 15 using uhci_hcd
>[ 2206.342123] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2206.660081] usb 5-1: new low-speed USB device number 16 using uhci_hcd
>[ 2206.722251] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2207.187054] usb 5-1: new low-speed USB device number 17 using uhci_hcd
>[ 2207.249117] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2207.714070] usb 5-1: new low-speed USB device number 18 using uhci_hcd
>[ 2207.776143] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2208.241306] usb 5-1: new low-speed USB device number 19 using uhci_hcd
>[ 2208.304119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2208.769090] usb 5-1: new low-speed USB device number 20 using uhci_hcd
>[ 2208.831119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2209.296087] usb 5-1: new low-speed USB device number 21 using uhci_hcd
>[ 2209.357166] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2209.910283] usb 5-1: new low-speed USB device number 22 using uhci_hcd
>[ 2209.973119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2210.438091] usb 5-1: new low-speed USB device number 23 using uhci_hcd
>[ 2210.499322] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2210.964075] usb 5-1: new low-speed USB device number 24 using uhci_hcd
>[ 2211.025127] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2211.541319] usb 5-1: new low-speed USB device number 25 using uhci_hcd
>[ 2211.603273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2212.160049] usb 5-1: new low-speed USB device number 26 using uhci_hcd
>[ 2212.222140] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2212.687102] usb 5-1: new low-speed USB device number 27 using uhci_hcd
>[ 2212.748164] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2213.213081] usb 5-1: new low-speed USB device number 28 using uhci_hcd
>[ 2213.275293] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2213.740072] usb 5-1: new low-speed USB device number 29 using uhci_hcd
>[ 2213.801294] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2214.266116] usb 5-1: new low-speed USB device number 30 using uhci_hcd
>[ 2214.328115] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2214.793080] usb 5-1: new low-speed USB device number 31 using uhci_hcd
>[ 2214.854314] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2215.410070] usb 5-1: new low-speed USB device number 32 using uhci_hcd
>[ 2215.471226] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2215.936148] usb 5-1: new low-speed USB device number 33 using uhci_hcd
>[ 2215.997315] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2216.462257] usb 5-1: new low-speed USB device number 34 using uhci_hcd
>[ 2216.523276] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2216.988322] usb 5-1: new low-speed USB device number 35 using uhci_hcd
>[ 2217.051119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2217.516101] usb 5-1: new low-speed USB device number 36 using uhci_hcd
>[ 2217.577310] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2218.042324] usb 5-1: new low-speed USB device number 37 using uhci_hcd
>[ 2218.104125] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2218.660233] usb 5-1: new low-speed USB device number 38 using uhci_hcd
>[ 2218.722274] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2219.187083] usb 5-1: new low-speed USB device number 39 using uhci_hcd
>[ 2219.248168] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2219.713085] usb 5-1: new low-speed USB device number 40 using uhci_hcd
>[ 2219.774141] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2220.239223] usb 5-1: new low-speed USB device number 41 using uhci_hcd
>[ 2220.300133] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2220.765084] usb 5-1: new low-speed USB device number 42 using uhci_hcd
>[ 2220.826173] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2221.291228] usb 5-1: new low-speed USB device number 43 using uhci_hcd
>[ 2221.352296] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2221.910211] usb 5-1: new low-speed USB device number 44 using uhci_hcd
>[ 2221.972129] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2222.437096] usb 5-1: new low-speed USB device number 45 using uhci_hcd
>[ 2222.498091] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2222.964231] usb 5-1: new low-speed USB device number 46 using uhci_hcd
>[ 2223.026134] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2223.491077] usb 5-1: new low-speed USB device number 47 using uhci_hcd
>[ 2223.552312] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2224.017169] usb 5-1: new low-speed USB device number 48 using uhci_hcd
>[ 2224.078114] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2224.543227] usb 5-1: new low-speed USB device number 49 using uhci_hcd
>[ 2224.604165] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2225.160082] usb 5-1: new low-speed USB device number 50 using uhci_hcd
>[ 2225.221298] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2225.686255] usb 5-1: new low-speed USB device number 51 using uhci_hcd
>[ 2225.747302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2226.212082] usb 5-1: new low-speed USB device number 52 using uhci_hcd
>[ 2226.274243] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2226.739061] usb 5-1: new low-speed USB device number 53 using uhci_hcd
>[ 2226.800170] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2227.265306] usb 5-1: new low-speed USB device number 54 using uhci_hcd
>[ 2227.327181] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2227.792192] usb 5-1: new low-speed USB device number 55 using uhci_hcd
>[ 2227.854406] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2228.411077] usb 5-1: new low-speed USB device number 56 using uhci_hcd
>[ 2228.473138] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2228.938260] usb 5-1: new low-speed USB device number 57 using uhci_hcd
>[ 2228.999145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2229.464083] usb 5-1: new low-speed USB device number 58 using uhci_hcd
>[ 2229.526118] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2229.991075] usb 5-1: new low-speed USB device number 59 using uhci_hcd
>[ 2230.052270] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2230.517078] usb 5-1: new low-speed USB device number 60 using uhci_hcd
>[ 2230.578095] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2231.044270] usb 5-1: new low-speed USB device number 61 using uhci_hcd
>[ 2231.106300] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2231.660226] usb 5-1: new low-speed USB device number 62 using uhci_hcd
>[ 2231.722112] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2232.187310] usb 5-1: new low-speed USB device number 63 using uhci_hcd
>[ 2232.249133] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2232.714083] usb 5-1: new low-speed USB device number 64 using uhci_hcd
>[ 2232.775218] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2233.240069] usb 5-1: new low-speed USB device number 65 using uhci_hcd
>[ 2233.302088] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2233.767271] usb 5-1: new low-speed USB device number 66 using uhci_hcd
>[ 2233.828122] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2234.293058] usb 5-1: new low-speed USB device number 67 using uhci_hcd
>[ 2234.354135] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2234.910266] usb 5-1: new low-speed USB device number 68 using uhci_hcd
>[ 2234.972308] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2235.437081] usb 5-1: new low-speed USB device number 69 using uhci_hcd
>[ 2235.498315] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2235.963142] usb 5-1: new low-speed USB device number 70 using uhci_hcd
>[ 2236.025310] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2236.490083] usb 5-1: new low-speed USB device number 71 using uhci_hcd
>[ 2236.552142] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2237.017050] usb 5-1: new low-speed USB device number 72 using uhci_hcd
>[ 2237.079095] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2237.544055] usb 5-1: new low-speed USB device number 73 using uhci_hcd
>[ 2237.606082] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2238.160079] usb 5-1: new low-speed USB device number 74 using uhci_hcd
>[ 2238.222122] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2238.687094] usb 5-1: new low-speed USB device number 75 using uhci_hcd
>[ 2238.749129] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2239.214076] usb 5-1: new low-speed USB device number 76 using uhci_hcd
>[ 2239.276122] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2239.741103] usb 5-1: new low-speed USB device number 77 using uhci_hcd
>[ 2239.802299] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2240.267120] usb 5-1: new low-speed USB device number 78 using uhci_hcd
>[ 2240.328133] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2240.793068] usb 5-1: new low-speed USB device number 79 using uhci_hcd
>[ 2240.855148] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2241.410130] usb 5-1: new low-speed USB device number 80 using uhci_hcd
>[ 2241.472302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2241.937094] usb 5-1: new low-speed USB device number 81 using uhci_hcd
>[ 2241.998143] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2242.463142] usb 5-1: new low-speed USB device number 82 using uhci_hcd
>[ 2242.525298] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2242.990175] usb 5-1: new low-speed USB device number 83 using uhci_hcd
>[ 2243.052119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2243.517068] usb 5-1: new low-speed USB device number 84 using uhci_hcd
>[ 2243.579310] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2244.044077] usb 5-1: new low-speed USB device number 85 using uhci_hcd
>[ 2244.106083] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2244.660061] usb 5-1: new low-speed USB device number 86 using uhci_hcd
>[ 2244.721310] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2245.186317] usb 5-1: new low-speed USB device number 87 using uhci_hcd
>[ 2245.248163] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2245.713227] usb 5-1: new low-speed USB device number 88 using uhci_hcd
>[ 2245.775135] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2245.931045] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2245.933749] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2245.936436] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2245.939134] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2245.941810] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2245.943629] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2246.145170] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.147896] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.150590] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.154036] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.156762] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.158478] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2246.360035] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.362743] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.365436] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.368166] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.370847] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.372533] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2246.574082] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.576782] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.579522] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.582480] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.585385] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.586899] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2246.788016] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.790888] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.793594] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.796275] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.798774] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.800253] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2246.800263] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2246.852088] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.854772] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.857478] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.860189] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.862644] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2246.864116] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.066018] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.068765] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.071475] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.074151] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.076855] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.078356] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.280050] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.282757] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.285471] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.287988] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.290441] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.292035] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.494235] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.497008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.502014] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.505608] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.507493] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.509882] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.711030] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.713757] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.716445] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.719161] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.721867] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.723687] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.723694] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2247.775247] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.777947] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.780732] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.784038] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.786765] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.788491] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2247.990271] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.993007] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.995702] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2247.998216] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.000661] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.002127] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2248.204218] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.206927] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.209651] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.212375] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.215053] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.216574] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2248.418060] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.420768] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.423483] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.426163] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.428889] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.430578] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2248.632020] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.634738] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.637433] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.640165] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.642893] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.644610] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2248.644619] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2248.696051] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.698750] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.702010] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.706039] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.707625] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.709153] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2248.911054] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.913762] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.916491] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.919196] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.921642] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2248.923105] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2249.125028] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.127825] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.130517] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.133262] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.136008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.137749] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2249.339020] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.341738] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.344433] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.347110] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.350380] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.352071] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2249.554098] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.556836] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.559689] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.562384] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.565061] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 2249.566613] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 2249.566623] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 2249.566637] hub 1-0:1.0: unable to enumerate USB device on port 5
>[ 2608.705226] wlan0: deauthenticating from 00:25:68:b1:ea:cf by local choice (reason=3)
>[ 2608.880497] cfg80211: Calling CRDA to update world regulatory domain
>[ 2608.981358] cfg80211: World regulatory domain updated:
>[ 2608.981363] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2608.981365] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2608.981367] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2608.981368] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2608.981370] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2608.981371] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2608.982578] cfg80211: Calling CRDA for country: AM
>[ 2608.984462] cfg80211: Regulatory domain changed to country: AM
>[ 2608.984466] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2608.984467] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2608.984469] cfg80211:   (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[ 2608.984471] cfg80211:   (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
>[ 2610.846110] PM: Syncing filesystems ... done.
>[ 2611.140621] PM: Preparing system for mem sleep
>[ 2611.188815] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 2611.200329] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2611.211276] PM: Entering mem sleep
>[ 2611.211521] Suspending console(s) (use no_console_suspend to debug)
>[ 2611.212069] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2611.212273] sd 0:0:0:0: [sda] Stopping disk
>[ 2611.258893] serial 00:09: disabled
>[ 2611.258980] ACPI handle has no context!
>[ 2611.259363] pciehp 0000:00:1c.5:pcie04: pciehp_suspend ENTRY
>[ 2611.259387] pciehp 0000:00:1c.4:pcie04: pciehp_suspend ENTRY
>[ 2611.259396] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
>[ 2611.259399] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[ 2611.259408] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[ 2611.375566] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D3hot
>[ 2612.126213] PM: suspend of devices complete after 914.407 msecs
>[ 2612.126401] PM: late suspend of devices complete after 0.186 msecs
>[ 2612.137151] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[ 2612.148118] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
>[ 2612.148208] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[ 2612.148296] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[ 2612.148553] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[ 2612.159115] uhci_hcd 0000:00:1a.2: wake-up capability enabled by ACPI
>[ 2612.159206] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[ 2612.159296] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[ 2612.159344] PM: noirq suspend of devices complete after 32.940 msecs
>[ 2612.159721] ACPI: Preparing to enter system sleep state S3
>[ 2612.165488] PM: Saving platform NVS memory
>[ 2612.186855] Disabling non-boot CPUs ...
>[ 2612.188252] smpboot: CPU 1 is now offline
>[ 2612.188787] CPU 1 offline: Remove Rx thread
>[ 2612.188960] Extended CMOS year: 2000
>[ 2612.188960] ACPI: Low-level resume complete
>[ 2612.188960] PM: Restoring platform NVS memory
>[ 2612.188960] Extended CMOS year: 2000
>[ 2612.188960] CPU0: Thermal monitoring handled by SMI
>[ 2612.188960] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
>[ 2612.194816] Enabling non-boot CPUs ...
>[ 2612.194911] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2612.188118] Disabled fast string operations
>[ 2612.188118] CPU1: Thermal monitoring handled by SMI
>[ 2612.207306] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
>[ 2612.212696] bnx2i: CPU 1 online: Create Rx thread
>[ 2612.213021] CPU1 is up
>[ 2612.216205] ACPI: Waking up from system sleep state S3
>[ 2612.273142] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[ 2612.273224] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[ 2612.273304] uhci_hcd 0000:00:1a.2: wake-up capability disabled by ACPI
>[ 2612.284074] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[ 2612.289028] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
>[ 2612.300531] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[ 2612.300610] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[ 2612.300687] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
>[ 2612.311074] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[ 2612.355209] PM: noirq resume of devices complete after 92.279 msecs
>[ 2612.355332] PM: early resume of devices complete after 0.074 msecs
>[ 2612.355405] i915 0000:00:02.0: setting latency timer to 64
>[ 2612.355410] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 2612.355436] usb usb3: root hub lost power or was reset
>[ 2612.355452] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[ 2612.355477] usb usb4: root hub lost power or was reset
>[ 2612.355492] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[ 2612.355517] usb usb5: root hub lost power or was reset
>[ 2612.355534] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 2612.355604] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[ 2612.355659] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[ 2612.355668] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[ 2612.355676] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
>[ 2612.355684] pciehp 0000:00:1c.4:pcie04: pciehp_resume ENTRY
>[ 2612.355693] pciehp 0000:00:1c.5:pcie04: pciehp_resume ENTRY
>[ 2612.355702] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2612.355725] usb usb6: root hub lost power or was reset
>[ 2612.355739] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2612.355765] usb usb7: root hub lost power or was reset
>[ 2612.355779] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[ 2612.355805] usb usb8: root hub lost power or was reset
>[ 2612.355821] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2612.355842] pci 0000:00:1e.0: setting latency timer to 64
>[ 2612.355854] ahci 0000:00:1f.2: setting latency timer to 64
>[ 2612.541752] serial 00:09: activated
>[ 2612.579208] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[ 2612.743084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[ 2612.746887] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2612.747052] ata6: SATA link down (SStatus 0 SControl 300)
>[ 2612.751610] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2612.751613] ata2.00: configured for UDMA/100
>[ 2612.807078] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
>[ 2612.936062] firewire_core 0000:86:02.0: rediscovered device fw0
>[ 2614.122233] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[ 2614.123015] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2614.279193] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2614.279316] ata1.00: configured for UDMA/100
>[ 2614.279372] sd 0:0:0:0: [sda] Starting disk
>[ 2614.467343] PM: resume of devices complete after 2112.007 msecs
>[ 2614.467544] PM: Finishing wakeup.
>[ 2614.467545] Restarting tasks ... done.
>[ 2614.589838] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
>[ 2614.593149] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[ 2614.634895] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2614.640505] tg3 0000:85:00.0: irq 49 for MSI/MSI-X
>[ 2614.669775] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[ 2614.674040] usb 1-5: new high-speed USB device number 103 using ehci_hcd
>[ 2614.884100] sd 6:0:0:0: [sdb] No Caching mode page present
>[ 2614.884107] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[ 2615.109070] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 2617.376450] wlan0: authenticate with 00:25:68:b1:ea:cf
>[ 2617.378793] wlan0: send auth to 00:25:68:b1:ea:cf (try 1/3)
>[ 2617.381648] wlan0: authenticated
>[ 2617.383166] wlan0: associate with 00:25:68:b1:ea:cf (try 1/3)
>[ 2617.385639] wlan0: RX AssocResp from 00:25:68:b1:ea:cf (capab=0x421 status=0 aid=2)
>[ 2617.387092] wlan0: associated
>[ 2617.387150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 3629.571226] FS-Cache: Loaded
>[ 3629.582969] Key type dns_resolver registered
>[ 3629.616200] FS-Cache: Netfs 'nfs' registered for caching
>[ 3629.659667] NFS: Registering the id_resolver key type
>[ 3629.659681] Key type id_resolver registered
>[ 3629.659682] Key type id_legacy registered
>[ 3629.921368] SELinux: initialized (dev 0:35, type nfs4), uses genfs_contexts
>[ 3630.307670] SELinux: initialized (dev 0:35, type nfs), uses genfs_contexts
>[ 4510.623399] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 4790.882099] usb 1-5: new high-speed USB device number 104 using ehci_hcd
>[ 4791.035033] usb 1-5: New USB device found, idVendor=04f2, idProduct=b059
>[ 4791.035043] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[ 4791.035049] usb 1-5: Product: CKF7037
>[ 4791.035055] usb 1-5: Manufacturer: Chicony Electronics Co., Ltd.
>[ 4791.035060] usb 1-5: SerialNumber: SN0001
>[ 4791.038475] uvcvideo: Found UVC 1.00 device CKF7037 (04f2:b059)
>[ 4791.055533] input: CKF7037 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input12
>[ 4792.910301] usb 1-5: USB disconnect, device number 104
>[ 4793.123070] usb 1-5: new high-speed USB device number 105 using ehci_hcd
>[ 4793.583295] usb 1-5: new high-speed USB device number 106 using ehci_hcd
>[ 4794.096083] usb 1-5: device not accepting address 106, error -71
>[ 4794.147543] hub 1-0:1.0: unable to enumerate USB device on port 5
>[ 4794.547293] usb 1-5: new high-speed USB device number 108 using ehci_hcd
>[ 4795.088084] usb 1-5: device not accepting address 108, error -71
>[ 4795.190356] usb 1-5: new high-speed USB device number 109 using ehci_hcd
>[ 4795.495140] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 4909.561227] Monitor-Mwait will be used to enter C-2 state
>[ 5076.972246] usb 5-1: new low-speed USB device number 92 using uhci_hcd
>[ 5077.035288] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5077.410098] usb 5-1: new low-speed USB device number 93 using uhci_hcd
>[ 5077.472273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5077.937230] usb 5-1: new low-speed USB device number 94 using uhci_hcd
>[ 5077.999263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5078.464083] usb 5-1: new low-speed USB device number 95 using uhci_hcd
>[ 5078.526362] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5078.991255] usb 5-1: new low-speed USB device number 96 using uhci_hcd
>[ 5079.053305] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5079.518065] usb 5-1: new low-speed USB device number 97 using uhci_hcd
>[ 5079.581306] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5080.046309] usb 5-1: new low-speed USB device number 98 using uhci_hcd
>[ 5080.108327] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5080.660087] usb 5-1: new low-speed USB device number 99 using uhci_hcd
>[ 5080.723196] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5081.188194] usb 5-1: new low-speed USB device number 100 using uhci_hcd
>[ 5081.251302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5081.716272] usb 5-1: new low-speed USB device number 101 using uhci_hcd
>[ 5081.778152] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5082.243063] usb 5-1: new low-speed USB device number 102 using uhci_hcd
>[ 5082.305308] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5082.770284] usb 5-1: new low-speed USB device number 103 using uhci_hcd
>[ 5082.832103] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5083.297295] usb 5-1: new low-speed USB device number 104 using uhci_hcd
>[ 5083.360242] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5083.910112] usb 5-1: new low-speed USB device number 105 using uhci_hcd
>[ 5083.972290] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5084.437268] usb 5-1: new low-speed USB device number 106 using uhci_hcd
>[ 5084.500283] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5084.965200] usb 5-1: new low-speed USB device number 107 using uhci_hcd
>[ 5085.028319] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5085.493276] usb 5-1: new low-speed USB device number 108 using uhci_hcd
>[ 5085.555302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5086.020282] usb 5-1: new low-speed USB device number 109 using uhci_hcd
>[ 5086.083120] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5086.548284] usb 5-1: new low-speed USB device number 110 using uhci_hcd
>[ 5086.610352] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5087.160254] usb 5-1: new low-speed USB device number 111 using uhci_hcd
>[ 5087.222361] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5087.687270] usb 5-1: new low-speed USB device number 112 using uhci_hcd
>[ 5087.749260] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5088.214269] usb 5-1: new low-speed USB device number 113 using uhci_hcd
>[ 5088.276301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5088.741057] usb 5-1: new low-speed USB device number 114 using uhci_hcd
>[ 5088.803231] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5089.268257] usb 5-1: new low-speed USB device number 115 using uhci_hcd
>[ 5089.331174] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5089.796276] usb 5-1: new low-speed USB device number 116 using uhci_hcd
>[ 5089.858168] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5090.410773] usb 5-1: new low-speed USB device number 117 using uhci_hcd
>[ 5090.473156] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5090.938290] usb 5-1: new low-speed USB device number 118 using uhci_hcd
>[ 5091.000303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5091.465224] usb 5-1: new low-speed USB device number 119 using uhci_hcd
>[ 5091.527350] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5091.992260] usb 5-1: new low-speed USB device number 120 using uhci_hcd
>[ 5092.055309] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5092.469263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5092.910094] usb 5-1: new low-speed USB device number 122 using uhci_hcd
>[ 5092.972108] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5093.437130] usb 5-1: new low-speed USB device number 123 using uhci_hcd
>[ 5093.500257] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5093.965269] usb 5-1: new low-speed USB device number 124 using uhci_hcd
>[ 5094.027289] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5094.492258] usb 5-1: new low-speed USB device number 125 using uhci_hcd
>[ 5094.555300] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5095.020302] usb 5-1: new low-speed USB device number 126 using uhci_hcd
>[ 5095.082273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5095.547142] usb 5-1: new low-speed USB device number 127 using uhci_hcd
>[ 5095.610304] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5096.160089] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[ 5096.222145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5096.687162] usb 5-1: new low-speed USB device number 3 using uhci_hcd
>[ 5096.750191] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5097.215264] usb 5-1: new low-speed USB device number 4 using uhci_hcd
>[ 5097.277288] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5097.742239] usb 5-1: new low-speed USB device number 5 using uhci_hcd
>[ 5097.804310] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5098.269205] usb 5-1: new low-speed USB device number 6 using uhci_hcd
>[ 5098.332234] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5098.797221] usb 5-1: new low-speed USB device number 7 using uhci_hcd
>[ 5098.859271] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5099.410235] usb 5-1: new low-speed USB device number 8 using uhci_hcd
>[ 5099.472300] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5099.937143] usb 5-1: new low-speed USB device number 9 using uhci_hcd
>[ 5100.000214] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5100.465242] usb 5-1: new low-speed USB device number 10 using uhci_hcd
>[ 5100.528120] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5100.993088] usb 5-1: new low-speed USB device number 11 using uhci_hcd
>[ 5101.055261] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5101.520243] usb 5-1: new low-speed USB device number 12 using uhci_hcd
>[ 5101.582269] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5102.047096] usb 5-1: new low-speed USB device number 13 using uhci_hcd
>[ 5102.110178] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5102.660259] usb 5-1: new low-speed USB device number 14 using uhci_hcd
>[ 5102.723279] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5103.188220] usb 5-1: new low-speed USB device number 15 using uhci_hcd
>[ 5103.250268] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5103.715158] usb 5-1: new low-speed USB device number 16 using uhci_hcd
>[ 5103.777255] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5104.242215] usb 5-1: new low-speed USB device number 17 using uhci_hcd
>[ 5104.304277] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5104.769238] usb 5-1: new low-speed USB device number 18 using uhci_hcd
>[ 5104.832185] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5105.297199] usb 5-1: new low-speed USB device number 19 using uhci_hcd
>[ 5105.360321] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5105.910244] usb 5-1: new low-speed USB device number 20 using uhci_hcd
>[ 5105.973272] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5106.438335] usb 5-1: new low-speed USB device number 21 using uhci_hcd
>[ 5106.500157] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5106.965089] usb 5-1: new low-speed USB device number 22 using uhci_hcd
>[ 5107.027297] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5107.492251] usb 5-1: new low-speed USB device number 23 using uhci_hcd
>[ 5107.554303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5108.019132] usb 5-1: new low-speed USB device number 24 using uhci_hcd
>[ 5108.081302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5108.546270] usb 5-1: new low-speed USB device number 25 using uhci_hcd
>[ 5108.609277] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5109.160147] usb 5-1: new low-speed USB device number 26 using uhci_hcd
>[ 5109.223147] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5109.688100] usb 5-1: new low-speed USB device number 27 using uhci_hcd
>[ 5109.751298] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5110.216240] usb 5-1: new low-speed USB device number 28 using uhci_hcd
>[ 5110.279299] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5110.744222] usb 5-1: new low-speed USB device number 29 using uhci_hcd
>[ 5110.806265] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5111.271072] usb 5-1: new low-speed USB device number 30 using uhci_hcd
>[ 5111.333250] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5111.798251] usb 5-1: new low-speed USB device number 31 using uhci_hcd
>[ 5111.860144] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5112.410246] usb 5-1: new low-speed USB device number 32 using uhci_hcd
>[ 5112.472273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5112.937256] usb 5-1: new low-speed USB device number 33 using uhci_hcd
>[ 5112.999300] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5113.464285] usb 5-1: new low-speed USB device number 34 using uhci_hcd
>[ 5113.526263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5113.991231] usb 5-1: new low-speed USB device number 35 using uhci_hcd
>[ 5114.053266] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5114.518223] usb 5-1: new low-speed USB device number 36 using uhci_hcd
>[ 5114.580272] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5115.045092] usb 5-1: new low-speed USB device number 37 using uhci_hcd
>[ 5115.108164] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5115.660219] usb 5-1: new low-speed USB device number 38 using uhci_hcd
>[ 5115.723234] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5116.188097] usb 5-1: new low-speed USB device number 39 using uhci_hcd
>[ 5116.250303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5116.715255] usb 5-1: new low-speed USB device number 40 using uhci_hcd
>[ 5116.778301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5117.243212] usb 5-1: new low-speed USB device number 41 using uhci_hcd
>[ 5117.305303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5117.770290] usb 5-1: new low-speed USB device number 42 using uhci_hcd
>[ 5117.832291] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5118.297296] usb 5-1: new low-speed USB device number 43 using uhci_hcd
>[ 5118.359206] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5118.910096] usb 5-1: new low-speed USB device number 44 using uhci_hcd
>[ 5118.972273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5119.437235] usb 5-1: new low-speed USB device number 45 using uhci_hcd
>[ 5119.499283] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5119.964228] usb 5-1: new low-speed USB device number 46 using uhci_hcd
>[ 5120.026301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5120.491124] usb 5-1: new low-speed USB device number 47 using uhci_hcd
>[ 5120.553288] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5121.018233] usb 5-1: new low-speed USB device number 48 using uhci_hcd
>[ 5121.080286] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5121.545131] usb 5-1: new low-speed USB device number 49 using uhci_hcd
>[ 5121.607292] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5122.160249] usb 5-1: new low-speed USB device number 50 using uhci_hcd
>[ 5122.222301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5122.687120] usb 5-1: new low-speed USB device number 51 using uhci_hcd
>[ 5122.749159] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5123.214264] usb 5-1: new low-speed USB device number 52 using uhci_hcd
>[ 5123.277305] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5123.742122] usb 5-1: new low-speed USB device number 53 using uhci_hcd
>[ 5123.805186] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5124.270141] usb 5-1: new low-speed USB device number 54 using uhci_hcd
>[ 5124.333134] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5124.798188] usb 5-1: new low-speed USB device number 55 using uhci_hcd
>[ 5124.861251] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5125.410244] usb 5-1: new low-speed USB device number 56 using uhci_hcd
>[ 5125.473089] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5125.938246] usb 5-1: new low-speed USB device number 57 using uhci_hcd
>[ 5126.001264] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5126.466092] usb 5-1: new low-speed USB device number 58 using uhci_hcd
>[ 5126.528289] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5126.993269] usb 5-1: new low-speed USB device number 59 using uhci_hcd
>[ 5127.056289] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5127.521223] usb 5-1: new low-speed USB device number 60 using uhci_hcd
>[ 5127.583297] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5128.048241] usb 5-1: new low-speed USB device number 61 using uhci_hcd
>[ 5128.110280] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5128.660221] usb 5-1: new low-speed USB device number 62 using uhci_hcd
>[ 5128.722281] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5129.187230] usb 5-1: new low-speed USB device number 63 using uhci_hcd
>[ 5129.249132] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5129.714230] usb 5-1: new low-speed USB device number 64 using uhci_hcd
>[ 5129.776116] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5130.241235] usb 5-1: new low-speed USB device number 65 using uhci_hcd
>[ 5130.303271] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5130.768071] usb 5-1: new low-speed USB device number 66 using uhci_hcd
>[ 5130.830273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5131.295255] usb 5-1: new low-speed USB device number 67 using uhci_hcd
>[ 5131.357307] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5131.910280] usb 5-1: new low-speed USB device number 68 using uhci_hcd
>[ 5131.972273] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5132.437249] usb 5-1: new low-speed USB device number 69 using uhci_hcd
>[ 5132.499304] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5132.964091] usb 5-1: new low-speed USB device number 70 using uhci_hcd
>[ 5133.026344] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5133.491248] usb 5-1: new low-speed USB device number 71 using uhci_hcd
>[ 5133.553263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5134.018247] usb 5-1: new low-speed USB device number 72 using uhci_hcd
>[ 5134.080282] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5134.545268] usb 5-1: new low-speed USB device number 73 using uhci_hcd
>[ 5134.608301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5135.160157] usb 5-1: new low-speed USB device number 74 using uhci_hcd
>[ 5135.222190] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5135.687119] usb 5-1: new low-speed USB device number 75 using uhci_hcd
>[ 5135.750173] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5136.215160] usb 5-1: new low-speed USB device number 76 using uhci_hcd
>[ 5136.278207] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5136.743203] usb 5-1: new low-speed USB device number 77 using uhci_hcd
>[ 5136.806134] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5137.271084] usb 5-1: new low-speed USB device number 78 using uhci_hcd
>[ 5137.334309] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5137.799247] usb 5-1: new low-speed USB device number 79 using uhci_hcd
>[ 5137.862275] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5138.410097] usb 5-1: new low-speed USB device number 80 using uhci_hcd
>[ 5138.472275] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5138.937107] usb 5-1: new low-speed USB device number 81 using uhci_hcd
>[ 5138.999147] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5139.464091] usb 5-1: new low-speed USB device number 82 using uhci_hcd
>[ 5139.526127] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5139.991245] usb 5-1: new low-speed USB device number 83 using uhci_hcd
>[ 5140.053269] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5140.518237] usb 5-1: new low-speed USB device number 84 using uhci_hcd
>[ 5140.580290] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5141.045244] usb 5-1: new low-speed USB device number 85 using uhci_hcd
>[ 5141.107297] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5141.660241] usb 5-1: new low-speed USB device number 86 using uhci_hcd
>[ 5141.722089] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5142.187085] usb 5-1: new low-speed USB device number 87 using uhci_hcd
>[ 5142.249151] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5142.714263] usb 5-1: new low-speed USB device number 88 using uhci_hcd
>[ 5142.776267] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5143.241219] usb 5-1: new low-speed USB device number 89 using uhci_hcd
>[ 5143.303296] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5143.768219] usb 5-1: new low-speed USB device number 90 using uhci_hcd
>[ 5143.830307] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5144.295109] usb 5-1: new low-speed USB device number 91 using uhci_hcd
>[ 5144.357154] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5144.910246] usb 5-1: new low-speed USB device number 92 using uhci_hcd
>[ 5144.972272] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5145.437234] usb 5-1: new low-speed USB device number 93 using uhci_hcd
>[ 5145.499123] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5145.964123] usb 5-1: new low-speed USB device number 94 using uhci_hcd
>[ 5146.027244] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5146.492144] usb 5-1: new low-speed USB device number 95 using uhci_hcd
>[ 5146.555197] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5147.020175] usb 5-1: new low-speed USB device number 96 using uhci_hcd
>[ 5147.083108] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5147.548117] usb 5-1: new low-speed USB device number 97 using uhci_hcd
>[ 5147.611293] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5148.160091] usb 5-1: new low-speed USB device number 98 using uhci_hcd
>[ 5148.222148] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5148.687078] usb 5-1: new low-speed USB device number 99 using uhci_hcd
>[ 5148.749145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5149.214258] usb 5-1: new low-speed USB device number 100 using uhci_hcd
>[ 5149.276185] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5149.741146] usb 5-1: new low-speed USB device number 101 using uhci_hcd
>[ 5149.803169] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5150.268238] usb 5-1: new low-speed USB device number 102 using uhci_hcd
>[ 5150.330301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5150.795244] usb 5-1: new low-speed USB device number 103 using uhci_hcd
>[ 5150.857340] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5151.410077] usb 5-1: new low-speed USB device number 104 using uhci_hcd
>[ 5151.472171] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5151.937110] usb 5-1: new low-speed USB device number 105 using uhci_hcd
>[ 5151.999139] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5152.464117] usb 5-1: new low-speed USB device number 106 using uhci_hcd
>[ 5152.526101] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5152.991092] usb 5-1: new low-speed USB device number 107 using uhci_hcd
>[ 5153.053152] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5153.518112] usb 5-1: new low-speed USB device number 108 using uhci_hcd
>[ 5153.580182] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5154.045100] usb 5-1: new low-speed USB device number 109 using uhci_hcd
>[ 5154.108146] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5154.660065] usb 5-1: new low-speed USB device number 110 using uhci_hcd
>[ 5154.723124] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5155.188083] usb 5-1: new low-speed USB device number 111 using uhci_hcd
>[ 5155.251113] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5155.716101] usb 5-1: new low-speed USB device number 112 using uhci_hcd
>[ 5155.778145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5156.243098] usb 5-1: new low-speed USB device number 113 using uhci_hcd
>[ 5156.305139] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5156.770069] usb 5-1: new low-speed USB device number 114 using uhci_hcd
>[ 5156.832141] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5157.297256] usb 5-1: new low-speed USB device number 115 using uhci_hcd
>[ 5157.359203] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5157.910262] usb 5-1: new low-speed USB device number 116 using uhci_hcd
>[ 5157.972138] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5158.437097] usb 5-1: new low-speed USB device number 117 using uhci_hcd
>[ 5158.499303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5158.964271] usb 5-1: new low-speed USB device number 118 using uhci_hcd
>[ 5159.026129] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5159.491250] usb 5-1: new low-speed USB device number 119 using uhci_hcd
>[ 5159.553230] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5160.018265] usb 5-1: new low-speed USB device number 120 using uhci_hcd
>[ 5160.080303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5160.545236] usb 5-1: new low-speed USB device number 121 using uhci_hcd
>[ 5160.607119] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5161.160084] usb 5-1: new low-speed USB device number 122 using uhci_hcd
>[ 5161.222297] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5161.687129] usb 5-1: new low-speed USB device number 123 using uhci_hcd
>[ 5161.750175] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5162.215146] usb 5-1: new low-speed USB device number 124 using uhci_hcd
>[ 5162.278109] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5162.743220] usb 5-1: new low-speed USB device number 125 using uhci_hcd
>[ 5162.806263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5163.271280] usb 5-1: new low-speed USB device number 126 using uhci_hcd
>[ 5163.334233] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5163.799054] usb 5-1: new low-speed USB device number 127 using uhci_hcd
>[ 5163.861077] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5164.410069] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[ 5164.472123] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5164.937101] usb 5-1: new low-speed USB device number 3 using uhci_hcd
>[ 5164.999135] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5165.464109] usb 5-1: new low-speed USB device number 4 using uhci_hcd
>[ 5165.526146] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5165.991079] usb 5-1: new low-speed USB device number 5 using uhci_hcd
>[ 5166.053162] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5166.518242] usb 5-1: new low-speed USB device number 6 using uhci_hcd
>[ 5166.580133] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5167.045105] usb 5-1: new low-speed USB device number 7 using uhci_hcd
>[ 5167.107108] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5167.660088] usb 5-1: new low-speed USB device number 8 using uhci_hcd
>[ 5167.722095] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5168.187166] usb 5-1: new low-speed USB device number 9 using uhci_hcd
>[ 5168.249196] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5168.714109] usb 5-1: new low-speed USB device number 10 using uhci_hcd
>[ 5168.776108] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5169.241065] usb 5-1: new low-speed USB device number 11 using uhci_hcd
>[ 5169.303099] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5169.768077] usb 5-1: new low-speed USB device number 12 using uhci_hcd
>[ 5169.831125] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5170.296119] usb 5-1: new low-speed USB device number 13 using uhci_hcd
>[ 5170.359138] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5170.910080] usb 5-1: new low-speed USB device number 14 using uhci_hcd
>[ 5170.972145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5171.437092] usb 5-1: new low-speed USB device number 15 using uhci_hcd
>[ 5171.499162] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5171.964265] usb 5-1: new low-speed USB device number 16 using uhci_hcd
>[ 5172.027334] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5172.492235] usb 5-1: new low-speed USB device number 17 using uhci_hcd
>[ 5172.554125] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5173.019096] usb 5-1: new low-speed USB device number 18 using uhci_hcd
>[ 5173.081299] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5173.546265] usb 5-1: new low-speed USB device number 19 using uhci_hcd
>[ 5173.608243] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5174.160104] usb 5-1: new low-speed USB device number 20 using uhci_hcd
>[ 5174.222226] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5174.687260] usb 5-1: new low-speed USB device number 21 using uhci_hcd
>[ 5174.749162] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5175.214091] usb 5-1: new low-speed USB device number 22 using uhci_hcd
>[ 5175.276251] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5175.741215] usb 5-1: new low-speed USB device number 23 using uhci_hcd
>[ 5175.803138] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5176.268227] usb 5-1: new low-speed USB device number 24 using uhci_hcd
>[ 5176.330275] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5176.795239] usb 5-1: new low-speed USB device number 25 using uhci_hcd
>[ 5176.858317] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5177.410109] usb 5-1: new low-speed USB device number 26 using uhci_hcd
>[ 5177.473141] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5177.938167] usb 5-1: new low-speed USB device number 27 using uhci_hcd
>[ 5178.001216] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5178.466248] usb 5-1: new low-speed USB device number 28 using uhci_hcd
>[ 5178.529293] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5178.994089] usb 5-1: new low-speed USB device number 29 using uhci_hcd
>[ 5179.056334] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5179.521263] usb 5-1: new low-speed USB device number 30 using uhci_hcd
>[ 5179.584098] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5180.049229] usb 5-1: new low-speed USB device number 31 using uhci_hcd
>[ 5180.111268] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5180.660068] usb 5-1: new low-speed USB device number 32 using uhci_hcd
>[ 5180.722295] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5181.187264] usb 5-1: new low-speed USB device number 33 using uhci_hcd
>[ 5181.249264] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5181.714086] usb 5-1: new low-speed USB device number 34 using uhci_hcd
>[ 5181.776279] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5182.241226] usb 5-1: new low-speed USB device number 35 using uhci_hcd
>[ 5182.303113] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5182.768085] usb 5-1: new low-speed USB device number 36 using uhci_hcd
>[ 5182.830270] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5183.295273] usb 5-1: new low-speed USB device number 37 using uhci_hcd
>[ 5183.357289] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5183.910229] usb 5-1: new low-speed USB device number 38 using uhci_hcd
>[ 5183.972127] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5184.437248] usb 5-1: new low-speed USB device number 39 using uhci_hcd
>[ 5184.499290] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5184.964133] usb 5-1: new low-speed USB device number 40 using uhci_hcd
>[ 5185.027163] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5185.492094] usb 5-1: new low-speed USB device number 41 using uhci_hcd
>[ 5185.555215] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5186.020134] usb 5-1: new low-speed USB device number 42 using uhci_hcd
>[ 5186.083269] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5186.548268] usb 5-1: new low-speed USB device number 43 using uhci_hcd
>[ 5186.611300] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5187.160222] usb 5-1: new low-speed USB device number 44 using uhci_hcd
>[ 5187.223122] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5187.688129] usb 5-1: new low-speed USB device number 45 using uhci_hcd
>[ 5187.750130] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5188.215270] usb 5-1: new low-speed USB device number 46 using uhci_hcd
>[ 5188.277299] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5188.742071] usb 5-1: new low-speed USB device number 47 using uhci_hcd
>[ 5188.804124] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5189.269249] usb 5-1: new low-speed USB device number 48 using uhci_hcd
>[ 5189.331289] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5189.796084] usb 5-1: new low-speed USB device number 49 using uhci_hcd
>[ 5189.858281] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5190.410261] usb 5-1: new low-speed USB device number 50 using uhci_hcd
>[ 5190.472291] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5190.937273] usb 5-1: new low-speed USB device number 51 using uhci_hcd
>[ 5190.999272] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5191.464259] usb 5-1: new low-speed USB device number 52 using uhci_hcd
>[ 5191.526282] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5191.991119] usb 5-1: new low-speed USB device number 53 using uhci_hcd
>[ 5192.053166] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5192.518257] usb 5-1: new low-speed USB device number 54 using uhci_hcd
>[ 5192.581198] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5193.046117] usb 5-1: new low-speed USB device number 55 using uhci_hcd
>[ 5193.109214] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5193.660224] usb 5-1: new low-speed USB device number 56 using uhci_hcd
>[ 5193.723324] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5194.188209] usb 5-1: new low-speed USB device number 57 using uhci_hcd
>[ 5194.251137] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5194.716282] usb 5-1: new low-speed USB device number 58 using uhci_hcd
>[ 5194.779337] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5195.244254] usb 5-1: new low-speed USB device number 59 using uhci_hcd
>[ 5195.306281] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5195.771086] usb 5-1: new low-speed USB device number 60 using uhci_hcd
>[ 5195.833279] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5196.299249] usb 5-1: new low-speed USB device number 61 using uhci_hcd
>[ 5196.361306] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5196.910067] usb 5-1: new low-speed USB device number 62 using uhci_hcd
>[ 5196.972264] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5197.437246] usb 5-1: new low-speed USB device number 63 using uhci_hcd
>[ 5197.499290] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5197.964247] usb 5-1: new low-speed USB device number 64 using uhci_hcd
>[ 5198.026302] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5198.491114] usb 5-1: new low-speed USB device number 65 using uhci_hcd
>[ 5198.553104] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5199.018252] usb 5-1: new low-speed USB device number 66 using uhci_hcd
>[ 5199.080286] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5199.545085] usb 5-1: new low-speed USB device number 67 using uhci_hcd
>[ 5199.607102] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5200.160162] usb 5-1: new low-speed USB device number 68 using uhci_hcd
>[ 5200.223168] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5200.688174] usb 5-1: new low-speed USB device number 69 using uhci_hcd
>[ 5200.751222] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5201.216199] usb 5-1: new low-speed USB device number 70 using uhci_hcd
>[ 5201.279239] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5201.744220] usb 5-1: new low-speed USB device number 71 using uhci_hcd
>[ 5201.807301] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5202.272255] usb 5-1: new low-speed USB device number 72 using uhci_hcd
>[ 5202.335145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5202.800121] usb 5-1: new low-speed USB device number 73 using uhci_hcd
>[ 5202.862299] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5203.410254] usb 5-1: new low-speed USB device number 74 using uhci_hcd
>[ 5203.472097] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5203.937251] usb 5-1: new low-speed USB device number 75 using uhci_hcd
>[ 5203.999293] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5204.464146] usb 5-1: new low-speed USB device number 76 using uhci_hcd
>[ 5204.526137] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5204.991235] usb 5-1: new low-speed USB device number 77 using uhci_hcd
>[ 5205.053281] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5205.518258] usb 5-1: new low-speed USB device number 78 using uhci_hcd
>[ 5205.580276] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5206.045260] usb 5-1: new low-speed USB device number 79 using uhci_hcd
>[ 5206.107303] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5206.660125] usb 5-1: new low-speed USB device number 80 using uhci_hcd
>[ 5206.722107] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5207.187213] usb 5-1: new low-speed USB device number 81 using uhci_hcd
>[ 5207.249164] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5207.714163] usb 5-1: new low-speed USB device number 82 using uhci_hcd
>[ 5207.777184] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5208.242196] usb 5-1: new low-speed USB device number 83 using uhci_hcd
>[ 5208.304263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5208.769159] usb 5-1: new low-speed USB device number 84 using uhci_hcd
>[ 5208.831230] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5209.296160] usb 5-1: new low-speed USB device number 85 using uhci_hcd
>[ 5209.358143] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5209.910091] usb 5-1: new low-speed USB device number 86 using uhci_hcd
>[ 5209.972285] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5210.437188] usb 5-1: new low-speed USB device number 87 using uhci_hcd
>[ 5210.499238] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5210.964232] usb 5-1: new low-speed USB device number 88 using uhci_hcd
>[ 5211.026125] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5211.491091] usb 5-1: new low-speed USB device number 89 using uhci_hcd
>[ 5211.554260] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5212.019143] usb 5-1: new low-speed USB device number 90 using uhci_hcd
>[ 5212.081091] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5212.546152] usb 5-1: new low-speed USB device number 91 using uhci_hcd
>[ 5212.609226] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5213.160081] usb 5-1: new low-speed USB device number 92 using uhci_hcd
>[ 5213.223131] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5213.688275] usb 5-1: new low-speed USB device number 93 using uhci_hcd
>[ 5213.750191] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5214.215046] usb 5-1: new low-speed USB device number 94 using uhci_hcd
>[ 5214.328053] usb 5-1: device descriptor read/64, error -71
>[ 5214.492085] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5214.957046] usb 5-1: new low-speed USB device number 95 using uhci_hcd
>[ 5215.019105] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5215.484260] usb 5-1: new low-speed USB device number 96 using uhci_hcd
>[ 5215.546256] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5216.011264] usb 5-1: new low-speed USB device number 97 using uhci_hcd
>[ 5216.073263] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5216.538165] usb 5-1: new low-speed USB device number 98 using uhci_hcd
>[ 5216.601124] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5217.160213] usb 5-1: new low-speed USB device number 99 using uhci_hcd
>[ 5217.222087] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5217.687107] usb 5-1: new low-speed USB device number 100 using uhci_hcd
>[ 5217.750082] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5218.216234] usb 5-1: new low-speed USB device number 101 using uhci_hcd
>[ 5218.278268] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5218.743084] usb 5-1: new low-speed USB device number 102 using uhci_hcd
>[ 5218.805142] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5219.272203] usb 5-1: new low-speed USB device number 103 using uhci_hcd
>[ 5219.334133] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5219.799103] usb 5-1: new low-speed USB device number 104 using uhci_hcd
>[ 5219.861082] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5220.410083] usb 5-1: new low-speed USB device number 105 using uhci_hcd
>[ 5220.472255] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5220.937055] usb 5-1: new low-speed USB device number 106 using uhci_hcd
>[ 5220.999083] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5221.464076] usb 5-1: new low-speed USB device number 107 using uhci_hcd
>[ 5221.527251] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5221.992057] usb 5-1: new low-speed USB device number 108 using uhci_hcd
>[ 5222.054246] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5222.519094] usb 5-1: new low-speed USB device number 109 using uhci_hcd
>[ 5222.581261] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5223.047133] usb 5-1: new low-speed USB device number 110 using uhci_hcd
>[ 5223.109174] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5223.660116] usb 5-1: new low-speed USB device number 111 using uhci_hcd
>[ 5223.722298] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5224.187055] usb 5-1: new low-speed USB device number 112 using uhci_hcd
>[ 5224.249069] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5224.714068] usb 5-1: new low-speed USB device number 113 using uhci_hcd
>[ 5224.776228] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5225.241231] usb 5-1: new low-speed USB device number 114 using uhci_hcd
>[ 5225.304135] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5225.769057] usb 5-1: new low-speed USB device number 115 using uhci_hcd
>[ 5225.832112] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5226.297079] usb 5-1: new low-speed USB device number 116 using uhci_hcd
>[ 5226.360124] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5226.910049] usb 5-1: new low-speed USB device number 117 using uhci_hcd
>[ 5226.972070] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5227.438122] usb 5-1: new low-speed USB device number 118 using uhci_hcd
>[ 5227.500151] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5227.966145] usb 5-1: new low-speed USB device number 119 using uhci_hcd
>[ 5228.028205] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5228.493093] usb 5-1: new low-speed USB device number 120 using uhci_hcd
>[ 5228.555137] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5229.020150] usb 5-1: new low-speed USB device number 121 using uhci_hcd
>[ 5229.082145] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5229.547138] usb 5-1: new low-speed USB device number 122 using uhci_hcd
>[ 5229.609089] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5230.160145] usb 5-1: new low-speed USB device number 123 using uhci_hcd
>[ 5230.222078] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5230.687095] usb 5-1: new low-speed USB device number 124 using uhci_hcd
>[ 5230.749160] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5231.214135] usb 5-1: new low-speed USB device number 125 using uhci_hcd
>[ 5231.276158] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5231.741050] usb 5-1: new low-speed USB device number 126 using uhci_hcd
>[ 5231.803072] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5232.268288] usb 5-1: new low-speed USB device number 127 using uhci_hcd
>[ 5232.330094] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5232.795190] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[ 5232.857339] hub 5-0:1.0: unable to enumerate USB device on port 1
>[ 5233.013032] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.015499] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.018059] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.020588] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.023128] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.025572] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5233.227050] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.230561] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.232581] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.235388] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.238213] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.239828] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5233.441089] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.443574] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.446104] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.448667] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.451153] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.453481] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5233.655036] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.657744] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.660432] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.663131] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.665835] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.667579] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5233.869083] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.871782] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.874486] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.877277] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.880127] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.881935] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5233.881942] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 5233.933023] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.937096] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.938554] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.941237] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.944013] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5233.946076] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5234.148197] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.150944] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.153718] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.157037] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.159779] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.161525] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5234.363041] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.365749] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.368431] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.371019] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.373585] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.375832] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5234.577008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.579520] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.582076] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.584611] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.587101] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.588599] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5234.790159] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.792632] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.795104] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.798521] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.800208] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.801692] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5234.801695] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 5234.853044] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.855730] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.858372] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.861007] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.863523] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5234.865839] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.067037] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.069572] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.072030] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.075006] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.078257] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.079987] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.281056] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.283537] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.286119] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.288592] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.291048] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.292529] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.494009] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.496565] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.499073] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.501734] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.504234] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.506370] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.708035] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.710527] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.713010] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.716008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.718550] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.720261] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.720264] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 5235.772006] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.774517] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.777006] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.779587] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.783007] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.784659] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5235.986013] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.989151] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.991521] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.995044] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.997008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5235.999172] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5236.201006] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.203787] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.206555] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.210649] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.211663] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.213516] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5236.415008] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.417530] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.420037] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.422604] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.425005] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.428284] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5236.630036] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.632543] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.635040] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.638053] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.640252] ehci_hcd 0000:00:1a.7: port 5 reset error -110
>[ 5236.641753] hub 1-0:1.0: hub_port_status failed (err = -32)
>[ 5236.641756] hub 1-0:1.0: Cannot enable port 5.  Maybe the USB cable is bad?
>[ 5236.641769] hub 1-0:1.0: unable to enumerate USB device on port 5

Actions: View

Attachments on bug 873015: 638223 | 638225 | 638227 | 638228 | 638229 | 638230