Attachment 638348 Details for Bug 852210 – syslog with assert

syslog with assert

messages (text/plain), 17.67 KB, created by David Juran on 2012-11-05 07:16:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Juran

Created: 2012-11-05 07:16:21 UTC

Size: 17.67 KB

patch

obsolete

>Nov  2 17:00:00 localhost kernel: [26604.582144] wlan2: deauthenticating from c0:62:6b:e4:bb:a2 by local choice (reason=3)
>Nov  2 17:00:00 localhost dnsmasq[1868]: reading /etc/resolv.conf
>Nov  2 17:00:00 localhost dnsmasq[1868]: using nameserver 10.126.0.2#53
>Nov  2 17:00:00 localhost dnsmasq[1868]: using nameserver 10.38.5.12#53
>Nov  2 17:00:00 localhost dnsmasq[1868]: using nameserver 10.38.5.11#53
>Nov  2 17:00:00 localhost avahi-daemon[1443]: Withdrawing address record for 10.126.42.176 on wlan2.
>Nov  2 17:00:00 localhost avahi-daemon[1443]: Leaving mDNS multicast group on interface wlan2.IPv4 with address 10.126.42.176.
>Nov  2 17:00:00 localhost avahi-daemon[1443]: Interface wlan2.IPv4 no longer relevant for mDNS.
>Nov  2 17:00:00 localhost nm-openvpn[16040]: write UDPv4 []: Network is unreachable (code=101)
>Nov  2 17:00:00 localhost avahi-daemon[1443]: Withdrawing address record for fe80::224:d7ff:fe22:2850 on wlan2.
>Nov  2 17:00:00 localhost avahi-daemon[1443]: Withdrawing workstation service for tun0.
>Nov  2 17:00:00 localhost nm-openvpn[16040]: SIGTERM[hard,] received, process exiting
>Nov  2 17:00:01 localhost systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
>Nov  2 17:00:01 localhost iscsi[9709]: Stopping iscsi: [  OK  ]
>Nov  2 17:00:01 localhost systemd[1]: PID file /run/sendmail.pid not readable (yet?) after start.
>Nov  2 17:00:01 localhost kernel: [26605.753074] usb 1-1.4: USB disconnect, device number 16
>Nov  2 17:00:01 localhost bluetoothd[1390]: HCI dev 0 down
>Nov  2 17:00:01 localhost bluetoothd[1390]: bluetoothd[1390]: HCI dev 0 down
>Nov  2 17:00:01 localhost bluetoothd[1390]: Adapter /org/bluez/1390/hci0 has been disabled
>Nov  2 17:00:01 localhost bluetoothd[1390]: HCI dev 0 unregistered
>Nov  2 17:00:01 localhost bluetoothd[1390]: Stopping hci0 event socket
>Nov  2 17:00:01 localhost bluetoothd[1390]: Unregister path: /org/bluez/1390/hci0
>Nov  2 17:00:01 localhost bluetoothd[1390]: bluetoothd[1390]: Adapter /org/bluez/1390/hci0 has been disabled
>Nov  2 17:00:01 localhost bluetoothd[1390]: bluetoothd[1390]: HCI dev 0 unregistered
>Nov  2 17:00:01 localhost bluetoothd[1390]: bluetoothd[1390]: Stopping hci0 event socket
>Nov  2 17:00:01 localhost bluetoothd[1390]: bluetoothd[1390]: Unregister path: /org/bluez/1390/hci0
>Nov  2 17:00:01 localhost systemd[1]: Service bluetooth.target is not needed anymore. Stopping.
>Nov  2 17:00:01 localhost systemd[1]: PID 9710 read from file /run/sm-client.pid does not exist.
>Nov  2 17:00:01 localhost ntpd[1404]: Deleting interface #10 tun0, 10.36.116.89#123, interface stats: received=0, sent=51, dropped=0, active_time=19115 secs
>Nov  2 17:00:01 localhost ntpd[1404]: 10.126.0.2 interface 10.36.116.89 -> (none)
>Nov  2 17:00:01 localhost ntpd[1404]: Deleting interface #9 wlan2, fe80::224:d7ff:fe22:2850#123, interface stats: received=0, sent=0, dropped=0, active_time=19192 secs
>Nov  2 17:00:01 localhost ntpd[1404]: Deleting interface #8 wlan2, 10.126.42.176#123, interface stats: received=65, sent=117, dropped=0, active_time=19194 secs
>Nov  2 17:00:01 localhost ntpd[1404]: 192.157.38.60 interface 10.126.42.176 -> (none)
>Nov  2 17:00:01 localhost ntpd[1404]: 79.136.84.63 interface 10.126.42.176 -> (none)
>Nov  2 17:00:01 localhost ntpd[1404]: peers refreshed
>Nov  2 17:00:02 localhost kernel: [26606.586216] PM: Syncing filesystems ... done.
>Nov  2 17:00:04 localhost kernel: [26607.045230] ------------[ cut here ]------------
>Nov  5 07:34:32 localhost kernel: [26607.045271] WARNING: at drivers/gpu/drm/i915/intel_display.c:1394 assert_pch_hdmi_disabled+0x61/0xd0 [i915]()
>Nov  5 07:34:32 localhost kernel: [26607.045272] Hardware name: 2537CT4
>Nov  5 07:34:32 localhost kernel: [26607.045272] IBX PCH hdmi port still using transcoder B
>Nov  5 07:34:32 localhost kernel: _ohci sdhci_pci sdhci mmc_core firewire_core crc_itu_t mxm_wmi wmi usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video
>Nov  5 07:34:32 localhost kernel: [26607.045303] Pid: 1767, comm: Xorg Not tainted 3.6.5-2.fc16.x86_64 #1
>Nov  5 07:34:32 localhost kernel: [26607.045304] Call Trace:
>Nov  5 07:34:32 localhost kernel: [26607.045311]  [<ffffffff8105c69f>] warn_slowpath_common+0x7f/0xc0
>Nov  5 07:34:32 localhost kernel: [26607.045312]  [<ffffffff8105c796>] warn_slowpath_fmt+0x46/0x50
>Nov  5 07:34:32 localhost kernel: [26607.045322]  [<ffffffffa009d881>] assert_pch_hdmi_disabled+0x61/0xd0 [i915]
>Nov  5 07:34:32 localhost kernel: [26607.045330]  [<ffffffffa00a2f39>] ironlake_crtc_disable+0x239/0x7a0 [i915]
>Nov  5 07:34:32 localhost kernel: [26607.045342]  [<ffffffffa00a352e>] ironlake_crtc_dpms+0x8e/0xa0 [i915]
>Nov  5 07:34:32 localhost kernel: [26607.045350]  [<ffffffffa009e978>] intel_crtc_dpms+0x48/0x140 [i915]
>Nov  5 07:34:32 localhost kernel: [26607.045359]  [<ffffffffa00a6d95>] intel_crtc_disable+0x35/0xb0 [i915]
>Nov  5 07:34:32 localhost kernel: [26607.045364]  [<ffffffffa00726d5>] drm_helper_disable_unused_functions+0x115/0x190 [drm_kms_helper]
>Nov  5 07:34:32 localhost kernel: [26607.045368]  [<ffffffffa0073fab>] drm_crtc_helper_set_config+0x90b/0xaf0 [drm_kms_helper]
>Nov  5 07:34:32 localhost kernel: [26607.045373]  [<ffffffffa0071acf>] drm_fb_helper_set_par+0x7f/0xf0 [drm_kms_helper]
>Nov  5 07:34:32 localhost kernel: [26607.045376]  [<ffffffff81317c1a>] fb_set_var+0x18a/0x430
>Nov  5 07:34:32 localhost kernel: [26607.045379]  [<ffffffff81097d39>] ? check_preempt_wakeup+0x149/0x270
>Nov  5 07:34:32 localhost kernel: [26607.045382]  [<ffffffff81326434>] fbcon_blank+0x1e4/0x2d0
>Nov  5 07:34:32 localhost kernel: [26607.045385]  [<ffffffff81395baa>] do_unblank_screen+0xba/0x1f0
>Nov  5 07:34:32 localhost kernel: [26607.045387]  [<ffffffff8138b215>] complete_change_console+0x65/0xf0
>Nov  5 07:34:32 localhost kernel: [26607.045388]  [<ffffffff8138c4bb>] vt_ioctl+0x121b/0x12a0
>Nov  5 07:34:32 localhost kernel: [26607.045390]  [<ffffffff81380ecc>] tty_ioctl+0x28c/0xbf0
>Nov  5 07:34:32 localhost kernel: [26607.045392]  [<ffffffff8127fcd1>] ? avc_has_perm_flags+0x141/0x190
>Nov  5 07:34:32 localhost kernel: [26607.045395]  [<ffffffff8161d3b0>] ? do_page_fault+0x200/0x4f0
>Nov  5 07:34:32 localhost kernel: [26607.045398]  [<ffffffff8119fe28>] do_vfs_ioctl+0x98/0x550
>Nov  5 07:34:32 localhost kernel: [26607.045400]  [<ffffffff81280f40>] ? inode_has_perm.constprop.29+0x30/0x40
>Nov  5 07:34:32 localhost kernel: [26607.045402]  [<ffffffff81282f92>] ? file_has_perm+0x92/0xa0
>Nov  5 07:34:32 localhost kernel: [26607.045404]  [<ffffffff811a0371>] sys_ioctl+0x91/0xa0
>Nov  5 07:34:32 localhost kernel: [26607.045406]  [<ffffffff81621929>] system_call_fastpath+0x16/0x1b
>Nov  5 07:34:32 localhost kernel: [26607.045407] ---[ end trace 460727db8094d6d5 ]---
>Nov  5 07:34:32 localhost kernel: [26607.984341] Freezing user space processes ... (elapsed 0.01 seconds) done.
>Nov  5 07:34:32 localhost kernel: [26607.995652] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>Nov  5 07:34:32 localhost kernel: [26608.006731] Suspending console(s) (use no_console_suspend to debug)
>Nov  5 07:34:32 localhost kernel: [26608.168043] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>Nov  5 07:34:32 localhost kernel: [26608.168186] sd 0:0:0:0: [sda] Stopping disk
>Nov  5 07:34:32 localhost kernel: [26608.427249] i915 0000:00:02.0: power state changed by ACPI to D3hot
>Nov  5 07:34:32 localhost kernel: [26608.434751] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26608.626245] PM: suspend of devices complete after 619.683 msecs
>Nov  5 07:34:32 localhost kernel: [26608.626400] PM: late suspend of devices complete after 0.153 msecs
>Nov  5 07:34:32 localhost kernel: [26608.637249] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26608.648073] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3hot
>Nov  5 07:34:32 localhost kernel: [26608.648319] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26608.659065] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3hot
>Nov  5 07:34:32 localhost kernel: [26608.659185] PM: noirq suspend of devices complete after 32.801 msecs
>Nov  5 07:34:32 localhost kernel: [26608.659341] ACPI: Preparing to enter system sleep state S3
>Nov  5 07:34:32 localhost kernel: [26608.709073] PM: Saving platform NVS memory
>Nov  5 07:34:32 localhost kernel: [26608.713404] Disabling non-boot CPUs ...
>Nov  5 07:34:32 localhost kernel: [26608.714997] smpboot: CPU 1 is now offline
>Nov  5 07:34:32 localhost kernel: [26608.715785] CPU 1 offline: Remove Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.717281] smpboot: CPU 2 is now offline
>Nov  5 07:34:32 localhost kernel: [26608.717655] CPU 2 offline: Remove Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.718979] smpboot: CPU 3 is now offline
>Nov  5 07:34:32 localhost kernel: [26608.719353] CPU 3 offline: Remove Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.719484] Extended CMOS year: 2000
>Nov  5 07:34:32 localhost kernel: [26608.720192] ACPI: Low-level resume complete
>Nov  5 07:34:32 localhost kernel: [26608.720245] PM: Restoring platform NVS memory
>Nov  5 07:34:32 localhost kernel: [26608.720877] Extended CMOS year: 2000
>Nov  5 07:34:32 localhost kernel: [26608.721219] microcode: CPU0 updated to revision 0xd, date = 2011-09-01
>Nov  5 07:34:32 localhost kernel: [26608.721252] Enabling non-boot CPUs ...
>Nov  5 07:34:32 localhost kernel: [26608.721376] smpboot: Booting Node 0 Processor 1 APIC 0x1
>Nov  5 07:34:32 localhost kernel: [26608.744001] microcode: CPU1 updated to revision 0xd, date = 2011-09-01
>Nov  5 07:34:32 localhost kernel: [26608.744006] bnx2i: CPU 1 online: Create Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.744031] CPU1 is up
>Nov  5 07:34:32 localhost kernel: [26608.744084] smpboot: Booting Node 0 Processor 2 APIC 0x4
>Nov  5 07:34:32 localhost kernel: [26608.765989] microcode: CPU2 updated to revision 0xd, date = 2011-09-01
>Nov  5 07:34:32 localhost kernel: [26608.765993] bnx2i: CPU 2 online: Create Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.766018] CPU2 is up
>Nov  5 07:34:32 localhost kernel: [26608.766061] smpboot: Booting Node 0 Processor 3 APIC 0x5
>Nov  5 07:34:32 localhost kernel: [26608.787978] microcode: CPU3 updated to revision 0xd, date = 2011-09-01
>Nov  5 07:34:32 localhost kernel: [26608.787982] bnx2i: CPU 3 online: Create Rx thread
>Nov  5 07:34:32 localhost kernel: [26608.788005] CPU3 is up
>Nov  5 07:34:32 localhost kernel: [26608.790721] ACPI: Waking up from system sleep state S3
>Nov  5 07:34:32 localhost kernel: [26608.865489] i915 0000:00:02.0: power state changed by ACPI to D0
>Nov  5 07:34:32 localhost kernel: [26608.898387] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
>Nov  5 07:34:32 localhost kernel: [26608.909391] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26608.920625] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>Nov  5 07:34:32 localhost kernel: [26608.931376] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26608.975481] PM: noirq resume of devices complete after 110.149 msecs
>Nov  5 07:34:32 localhost kernel: [26608.975548] PM: early resume of devices complete after 0.039 msecs
>Nov  5 07:34:32 localhost kernel: [26608.975592] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>Nov  5 07:34:32 localhost kernel: [26609.208367] usb 1-1.6: reset high-speed USB device number 5 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26609.282197] ata6: SATA link down (SStatus 0 SControl 300)
>Nov  5 07:34:32 localhost kernel: [26609.284197] ata5: SATA link down (SStatus 0 SControl 300)
>Nov  5 07:34:32 localhost kernel: [26609.370302] usb 1-1.5: reset high-speed USB device number 22 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26609.441152] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>Nov  5 07:34:32 localhost kernel: [26609.452939] ata2.00: configured for UDMA/100
>Nov  5 07:34:32 localhost kernel: [26609.476084] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
>Nov  5 07:34:32 localhost kernel: [26609.532069] firewire_core 0000:0d:00.3: rediscovered device fw0
>Nov  5 07:34:32 localhost kernel: [26609.733171] usb 1-1.5.5: reset full-speed USB device number 24 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26609.891051] usb 1-1.5.4: reset full-speed USB device number 23 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26610.241946] usb 1-1.5.4.3: reset full-speed USB device number 26 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26610.388871] usb 1-1.5.4.1: reset full-speed USB device number 25 using ehci_hcd
>Nov  5 07:34:32 localhost kernel: [26611.626905] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Nov  5 07:34:32 localhost kernel: [26611.638207] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>Nov  5 07:34:32 localhost kernel: [26611.638521] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>Nov  5 07:34:32 localhost kernel: [26611.641397] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>Nov  5 07:34:32 localhost kernel: [26611.641683] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>Nov  5 07:34:32 localhost kernel: [26611.643011] ata1.00: configured for UDMA/100
>Nov  5 07:34:32 localhost kernel: [26611.643511] sd 0:0:0:0: [sda] Starting disk
>Nov  5 07:34:32 localhost kernel: [26611.644178] Extended CMOS year: 2000
>Nov  5 07:34:32 localhost kernel: [26611.664193] PM: resume of devices complete after 2690.123 msecs
>Nov  5 07:34:32 localhost abrt-dump-oops[1441]: abrt-dump-oops: Found oopses: 1
>Nov  5 07:34:32 localhost kernel: [26611.664329] Restarting tasks ... done.
>Nov  5 07:34:32 localhost kernel: [26611.679030] video LNXVIDEO:00: Restoring backlight state
>Nov  5 07:34:32 localhost abrt-dump-oops[1441]: abrt-dump-oops: Creating dump directories
>Nov  5 07:34:32 localhost abrtd: Directory 'oops-2012-11-05-07:34:32-1441-0' creation detected
>Nov  5 07:34:32 localhost abrt-dump-oops: Reported 1 kernel oopses to Abrt
>Nov  5 07:34:32 localhost kernel: [26612.187863] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
>Nov  5 07:34:32 localhost kernel: [26612.191281] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
>Nov  5 07:34:32 localhost kernel: [26612.191484] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
>Nov  5 07:34:32 localhost rsyslogd-2177: imuxsock begins to drop messages from pid 1757 due to rate-limiting
>Nov  5 07:34:32 localhost pulseaudio[2572]: module-alsa-card.c: Failed to find a working profile.
>Nov  5 07:34:32 localhost pulseaudio[2572]: module.c: Failed to load  module "module-alsa-card" (argument: "device_id="29" name="platform-thinkpad_acpi" card_name="alsa_card.platform-thinkpad_acpi" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""): initialization failed.
>Nov  5 07:34:33 localhost kernel: [26612.317958] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
>Nov  5 07:34:33 localhost kernel: [26612.481576] usb 1-1.4: new full-speed USB device number 27 using ehci_hcd
>Nov  5 07:34:33 localhost kernel: [26612.570649] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
>Nov  5 07:34:33 localhost kernel: [26612.570657] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>Nov  5 07:34:33 localhost kernel: [26612.570661] usb 1-1.4: Product: Broadcom Bluetooth Device
>Nov  5 07:34:33 localhost kernel: [26612.570665] usb 1-1.4: Manufacturer: Broadcom Corp
>Nov  5 07:34:33 localhost kernel: [26612.570669] usb 1-1.4: SerialNumber: 78DD08AC31D2
>Nov  5 07:34:33 localhost bluetoothd[1390]: HCI dev 0 registered
>Nov  5 07:34:33 localhost bluetoothd[1390]: bluetoothd[1390]: HCI dev 0 registered
>Nov  5 07:34:33 localhost bluetoothd[1390]: Listening for HCI events on hci0
>Nov  5 07:34:33 localhost bluetoothd[1390]: bluetoothd[1390]: Listening for HCI events on hci0
>Nov  5 07:34:33 localhost bluetoothd[1390]: HCI dev 0 up
>Nov  5 07:34:33 localhost bluetoothd[1390]: bluetoothd[1390]: HCI dev 0 up
>Nov  5 07:34:33 localhost bluetoothd[1390]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
>Nov  5 07:34:33 localhost bluetoothd[1390]: bluetoothd[1390]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
>Nov  5 07:34:34 localhost bluetoothd[1390]: input-headset driver probe failed for device C0:38:F9:D3:2A:6A
>Nov  5 07:34:34 localhost bluetoothd[1390]: bluetoothd[1390]: input-headset driver probe failed for device C0:38:F9:D3:2A:6A
>Nov  5 07:34:34 localhost bluetoothd[1390]: input-headset driver probe failed for device 38:EC:E4:6E:BD:71
>Nov  5 07:34:34 localhost bluetoothd[1390]: bluetoothd[1390]: input-headset driver probe failed for device 38:EC:E4:6E:BD:71
>Nov  5 07:34:34 localhost bluetoothd[1390]: Adapter /org/bluez/1390/hci0 has been enabled
>Nov  5 07:34:34 localhost bluetoothd[1390]: bluetoothd[1390]: Adapter /org/bluez/1390/hci0 has been enabled
>Nov  5 07:34:34 localhost abrtd: Can't open file '/var/spool/abrt/oops-2012-11-05-07:34:32-1441-0/uid': No such file or directory
>Nov  5 07:34:36 localhost abrtd: DUP_OF_DIR: /var/spool/abrt/oops-2012-10-26-08:06:33-1425-0
>Nov  5 07:34:36 localhost abrtd: Problem directory is a duplicate of /var/spool/abrt/oops-2012-10-26-08:06:33-1425-0
>Nov  5 07:34:36 localhost abrtd: Deleting problem directory oops-2012-11-05-07:34:32-1441-0 (dup of oops-2012-10-26-08:06:33-1425-0)
>Nov  5 07:34:36 localhost abrtd: Can't open file '/var/spool/abrt/oops-2012-10-26-08:06:33-1425-0/uid': No such file or directory
>Nov  5 07:34:38 localhost rsyslogd-2177: imuxsock lost 163 messages from pid 1757 due to rate-limiting
>Nov  5 07:34:43 localhost rsyslogd-2177: imuxsock begins to drop messages from pid 1757 due to rate-limiting
>Nov  5 07:35:20 localhost rsyslogd-2177: imuxsock lost 218 messages from pid 1757 due to rate-limiting
>Nov  5 07:35:25 localhost rsyslogd-2177: imuxsock begins to drop messages from pid 1757 due to rate-limiting
>Nov  5 07:35:30 localhost rsyslogd-2177: imuxsock lost 143 messages from pid 1757 due to rate-limiting

Actions: View

Attachments on bug 852210: 607348 | 607349 | 638348