Attachment 645799 Details for Bug 877119 – File: dmesg

File: dmesg

dmesg (text/plain), 224.73 KB, created by Micah Shennum on 2012-11-15 18:03:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Micah Shennum

Created: 2012-11-15 18:03:01 UTC

Size: 224.73 KB

patch

obsolete

>[   38.490210] Bluetooth: Core ver 2.16
>[   38.490297] NET: Registered protocol family 31
>[   38.490300] Bluetooth: HCI device and connection manager initialized
>[   38.490302] Bluetooth: HCI socket layer initialized
>[   38.490304] Bluetooth: L2CAP socket layer initialized
>[   38.490310] Bluetooth: SCO socket layer initialized
>[   38.536850] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   38.536855] Bluetooth: BNEP filters: protocol multicast
>[   38.798613] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[   38.899200] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[   38.899401] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   55.446165] fuse init (API version 7.20)
>[   55.458198] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[   55.468452] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   67.123473] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   75.520850] wlan0: authenticate with 00:26:cb:4e:90:f0
>[   75.529255] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 1/3)
>[   75.730038] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 2/3)
>[   75.931044] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 3/3)
>[   76.132038] wlan0: authentication with 00:26:cb:4e:90:f0 timed out
>[   76.624853] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[   76.633027] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[   76.834047] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[   77.035040] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[   77.236048] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[   77.726448] ath5k: ath5k_hw_get_isr: ISR: 0x00000004 IMR: 0x00000000
>[   77.729767] wlan0: authenticate with 00:26:cb:4e:90:c0
>[   77.740853] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 1/3)
>[   77.941058] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 2/3)
>[   78.142028] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 3/3)
>[   78.343049] wlan0: authentication with 00:26:cb:4e:90:c0 timed out
>[   78.836451] wlan0: authenticate with 00:26:cb:4e:7f:d0
>[   78.844718] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 1/3)
>[   79.045061] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 2/3)
>[   79.246056] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 3/3)
>[   79.447053] wlan0: authentication with 00:26:cb:4e:7f:d0 timed out
>[   79.941056] wlan0: authenticate with 00:26:cb:4e:92:00
>[   79.949065] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[   80.150057] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[   80.351055] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[   80.552052] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[   81.043478] wlan0: authenticate with 00:26:cb:4e:92:0f
>[   81.048247] wlan0: direct probe to 00:26:cb:4e:92:0f (try 1/3)
>[   81.249058] wlan0: direct probe to 00:26:cb:4e:92:0f (try 2/3)
>[   81.450058] wlan0: direct probe to 00:26:cb:4e:92:0f (try 3/3)
>[   81.651053] wlan0: authentication with 00:26:cb:4e:92:0f timed out
>[   82.080147] wlan0: authenticate with 00:26:cb:4e:8f:d0
>[   82.087298] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 1/3)
>[   82.288025] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 2/3)
>[   82.489056] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 3/3)
>[   82.690055] wlan0: authentication with 00:26:cb:4e:8f:d0 timed out
>[   83.059542] wlan0: authenticate with 00:26:cb:4e:90:cf
>[   83.073034] wlan0: direct probe to 00:26:cb:4e:90:cf (try 1/3)
>[   83.274062] wlan0: direct probe to 00:26:cb:4e:90:cf (try 2/3)
>[   83.475057] wlan0: direct probe to 00:26:cb:4e:90:cf (try 3/3)
>[   83.676056] wlan0: authentication with 00:26:cb:4e:90:cf timed out
>[   83.977365] wlan0: authenticate with 00:26:cb:4e:90:ff
>[   83.983400] wlan0: direct probe to 00:26:cb:4e:90:ff (try 1/3)
>[   84.184069] wlan0: direct probe to 00:26:cb:4e:90:ff (try 2/3)
>[   84.385056] wlan0: direct probe to 00:26:cb:4e:90:ff (try 3/3)
>[   84.586056] wlan0: authentication with 00:26:cb:4e:90:ff timed out
>[   84.821774] wlan0: authenticate with 00:26:cb:4e:91:60
>[   84.829594] wlan0: direct probe to 00:26:cb:4e:91:60 (try 1/3)
>[   85.030047] wlan0: direct probe to 00:26:cb:4e:91:60 (try 2/3)
>[   85.231057] wlan0: direct probe to 00:26:cb:4e:91:60 (try 3/3)
>[   85.432053] wlan0: authentication with 00:26:cb:4e:91:60 timed out
>[   85.668766] wlan0: authenticate with 00:26:cb:a1:59:f0
>[   85.675306] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 1/3)
>[   85.876027] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 2/3)
>[   86.077055] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 3/3)
>[   86.278024] wlan0: authentication with 00:26:cb:a1:59:f0 timed out
>[   86.450990] wlan0: authenticate with 00:26:cb:4e:8c:40
>[   86.457105] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 1/3)
>[   86.658067] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 2/3)
>[   86.859053] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 3/3)
>[   87.060050] wlan0: authentication with 00:26:cb:4e:8c:40 timed out
>[   91.162767] wlan0: authenticate with 00:26:cb:4e:86:5f
>[   91.175494] wlan0: direct probe to 00:26:cb:4e:86:5f (try 1/3)
>[   91.376056] wlan0: direct probe to 00:26:cb:4e:86:5f (try 2/3)
>[   91.577029] wlan0: direct probe to 00:26:cb:4e:86:5f (try 3/3)
>[   91.778051] wlan0: authentication with 00:26:cb:4e:86:5f timed out
>[   95.814674] wlan0: authenticate with 00:26:cb:4e:90:c0
>[   95.821082] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 1/3)
>[   96.022062] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 2/3)
>[   96.223050] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 3/3)
>[   96.424049] wlan0: authentication with 00:26:cb:4e:90:c0 timed out
>[   96.852815] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[   96.859440] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[   97.060023] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[   97.261061] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[   97.462032] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[  102.880398] wlan0: authenticate with 00:26:cb:4e:90:f0
>[  102.889364] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 1/3)
>[  103.090043] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 2/3)
>[  103.291044] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 3/3)
>[  103.492037] wlan0: authentication with 00:26:cb:4e:90:f0 timed out
>[  103.984800] wlan0: authenticate with 00:26:cb:4e:92:00
>[  103.992028] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[  104.193041] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[  104.394039] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[  104.595035] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[  105.089798] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[  105.096549] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[  105.297026] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[  105.498026] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[  105.699044] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[  106.192297] wlan0: authenticate with 00:26:cb:4e:7f:d0
>[  106.198470] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 1/3)
>[  106.399056] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 2/3)
>[  106.600024] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 3/3)
>[  106.801058] wlan0: authentication with 00:26:cb:4e:7f:d0 timed out
>[  107.293924] wlan0: authenticate with 00:26:cb:4e:90:cf
>[  107.300647] wlan0: direct probe to 00:26:cb:4e:90:cf (try 1/3)
>[  107.501052] wlan0: direct probe to 00:26:cb:4e:90:cf (try 2/3)
>[  107.702055] wlan0: direct probe to 00:26:cb:4e:90:cf (try 3/3)
>[  107.903056] wlan0: authentication with 00:26:cb:4e:90:cf timed out
>[  108.395195] wlan0: authenticate with 00:26:cb:4e:92:0f
>[  108.402444] wlan0: direct probe to 00:26:cb:4e:92:0f (try 1/3)
>[  108.603025] wlan0: direct probe to 00:26:cb:4e:92:0f (try 2/3)
>[  108.804058] wlan0: direct probe to 00:26:cb:4e:92:0f (try 3/3)
>[  109.005053] wlan0: authentication with 00:26:cb:4e:92:0f timed out
>[  109.433948] wlan0: authenticate with 00:26:cb:4e:91:d0
>[  109.440651] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 1/3)
>[  109.641066] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 2/3)
>[  109.842056] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 3/3)
>[  110.043054] wlan0: authentication with 00:26:cb:4e:91:d0 timed out
>[  110.472133] wlan0: authenticate with 00:26:cb:4e:90:ff
>[  110.477610] wlan0: direct probe to 00:26:cb:4e:90:ff (try 1/3)
>[  110.678055] wlan0: direct probe to 00:26:cb:4e:90:ff (try 2/3)
>[  110.879026] wlan0: direct probe to 00:26:cb:4e:90:ff (try 3/3)
>[  111.080054] wlan0: authentication with 00:26:cb:4e:90:ff timed out
>[  111.508946] wlan0: authenticate with 00:26:cb:4e:91:60
>[  111.516289] wlan0: direct probe to 00:26:cb:4e:91:60 (try 1/3)
>[  111.717065] wlan0: direct probe to 00:26:cb:4e:91:60 (try 2/3)
>[  111.918060] wlan0: direct probe to 00:26:cb:4e:91:60 (try 3/3)
>[  112.119051] wlan0: authentication with 00:26:cb:4e:91:60 timed out
>[  112.548200] wlan0: authenticate with 00:26:cb:4e:8f:d0
>[  112.556877] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 1/3)
>[  112.757055] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 2/3)
>[  112.958028] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 3/3)
>[  113.159053] wlan0: authentication with 00:26:cb:4e:8f:d0 timed out
>[  113.524350] wlan0: authenticate with 00:26:cb:4e:8c:4f
>[  113.530597] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 1/3)
>[  113.731028] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 2/3)
>[  113.932053] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 3/3)
>[  114.133054] wlan0: authentication with 00:26:cb:4e:8c:4f timed out
>[  114.434304] wlan0: authenticate with 00:26:cb:a1:59:f0
>[  114.440328] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 1/3)
>[  114.641051] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 2/3)
>[  114.842027] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 3/3)
>[  115.043054] wlan0: authentication with 00:26:cb:a1:59:f0 timed out
>[  115.343840] wlan0: authenticate with 00:26:cb:82:3c:d0
>[  115.350394] wlan0: direct probe to 00:26:cb:82:3c:d0 (try 1/3)
>[  115.551055] wlan0: direct probe to 00:26:cb:82:3c:d0 (try 2/3)
>[  115.752025] wlan0: direct probe to 00:26:cb:82:3c:d0 (try 3/3)
>[  115.953051] wlan0: authentication with 00:26:cb:82:3c:d0 timed out
>[  116.190171] wlan0: authenticate with 00:26:cb:4e:86:5f
>[  116.196450] wlan0: direct probe to 00:26:cb:4e:86:5f (try 1/3)
>[  116.397054] wlan0: direct probe to 00:26:cb:4e:86:5f (try 2/3)
>[  116.598055] wlan0: direct probe to 00:26:cb:4e:86:5f (try 3/3)
>[  116.799054] wlan0: authentication with 00:26:cb:4e:86:5f timed out
>[  116.972171] wlan0: authenticate with 00:26:cb:4e:8c:40
>[  116.978502] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 1/3)
>[  117.179052] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 2/3)
>[  117.380055] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 3/3)
>[  117.581054] wlan0: authentication with 00:26:cb:4e:8c:40 timed out
>[  121.620896] wlan0: authenticate with 00:26:cb:4e:90:c0
>[  121.626059] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 1/3)
>[  121.827034] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 2/3)
>[  122.028031] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 3/3)
>[  122.229030] wlan0: authentication with 00:26:cb:4e:90:c0 timed out
>[  122.722074] wlan0: authenticate with 00:26:cb:4e:90:f0
>[  122.729478] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 1/3)
>[  122.930073] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 2/3)
>[  123.131057] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 3/3)
>[  123.332050] wlan0: authentication with 00:26:cb:4e:90:f0 timed out
>[  123.762595] wlan0: authenticate with 00:26:cb:4e:92:00
>[  123.767201] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[  123.968027] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[  124.169057] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[  124.370052] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[  129.020747] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[  129.027581] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[  129.228056] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[  129.429058] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[  129.630023] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[  130.058831] wlan0: authenticate with 00:26:cb:4e:7f:d0
>[  130.063498] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 1/3)
>[  130.264053] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 2/3)
>[  130.465026] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 3/3)
>[  130.666057] wlan0: authentication with 00:26:cb:4e:7f:d0 timed out
>[  131.094002] wlan0: authenticate with 00:26:cb:4e:92:00
>[  131.100063] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[  131.301052] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[  131.502035] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[  131.703041] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[  132.132179] wlan0: authenticate with 00:26:cb:4e:91:d0
>[  132.138829] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 1/3)
>[  132.339037] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 2/3)
>[  132.540022] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 3/3)
>[  132.741074] wlan0: authentication with 00:26:cb:4e:91:d0 timed out
>[  133.170350] wlan0: authenticate with 00:26:cb:4e:90:cf
>[  133.175972] wlan0: direct probe to 00:26:cb:4e:90:cf (try 1/3)
>[  133.377045] wlan0: direct probe to 00:26:cb:4e:90:cf (try 2/3)
>[  133.578055] wlan0: direct probe to 00:26:cb:4e:90:cf (try 3/3)
>[  133.779045] wlan0: authentication with 00:26:cb:4e:90:cf timed out
>[  134.212165] wlan0: authenticate with 00:26:cb:4e:8f:d0
>[  134.222926] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 1/3)
>[  134.423023] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 2/3)
>[  134.624045] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 3/3)
>[  134.825057] wlan0: authentication with 00:26:cb:4e:8f:d0 timed out
>[  135.193807] wlan0: authenticate with 00:26:cb:4e:8c:4f
>[  135.200382] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 1/3)
>[  135.401051] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 2/3)
>[  135.602034] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 3/3)
>[  135.803044] wlan0: authentication with 00:26:cb:4e:8c:4f timed out
>[  136.107489] wlan0: authenticate with 00:26:cb:4e:90:ff
>[  136.112381] wlan0: direct probe to 00:26:cb:4e:90:ff (try 1/3)
>[  136.313049] wlan0: direct probe to 00:26:cb:4e:90:ff (try 2/3)
>[  136.514039] wlan0: direct probe to 00:26:cb:4e:90:ff (try 3/3)
>[  136.715031] wlan0: authentication with 00:26:cb:4e:90:ff timed out
>[  137.012174] wlan0: authenticate with 00:26:cb:4e:86:5f
>[  137.018470] wlan0: direct probe to 00:26:cb:4e:86:5f (try 1/3)
>[  137.219028] wlan0: direct probe to 00:26:cb:4e:86:5f (try 2/3)
>[  137.420039] wlan0: direct probe to 00:26:cb:4e:86:5f (try 3/3)
>[  137.621033] wlan0: authentication with 00:26:cb:4e:86:5f timed out
>[  137.857923] wlan0: authenticate with 00:26:cb:4e:8c:40
>[  137.864648] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 1/3)
>[  138.065029] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 2/3)
>[  138.266052] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 3/3)
>[  138.467025] wlan0: authentication with 00:26:cb:4e:8c:40 timed out
>[  138.639642] wlan0: authenticate with 00:26:cb:4e:91:60
>[  138.646500] wlan0: direct probe to 00:26:cb:4e:91:60 (try 1/3)
>[  138.847051] wlan0: direct probe to 00:26:cb:4e:91:60 (try 2/3)
>[  139.048038] wlan0: direct probe to 00:26:cb:4e:91:60 (try 3/3)
>[  139.249032] wlan0: authentication with 00:26:cb:4e:91:60 timed out
>[  139.386819] wlan0: authenticate with 00:26:cb:a1:59:f0
>[  139.391478] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 1/3)
>[  139.592058] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 2/3)
>[  139.793056] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 3/3)
>[  139.994053] wlan0: authentication with 00:26:cb:a1:59:f0 timed out
>[  144.030401] wlan0: authenticate with 00:26:cb:4e:92:0f
>[  144.037660] wlan0: direct probe to 00:26:cb:4e:92:0f (try 1/3)
>[  144.238056] wlan0: direct probe to 00:26:cb:4e:92:0f (try 2/3)
>[  144.439058] wlan0: direct probe to 00:26:cb:4e:92:0f (try 3/3)
>[  144.640032] wlan0: authentication with 00:26:cb:4e:92:0f timed out
>[  148.675053] wlan0: authenticate with 00:26:cb:4e:86:50
>[  148.682035] wlan0: direct probe to 00:26:cb:4e:86:50 (try 1/3)
>[  148.883059] wlan0: direct probe to 00:26:cb:4e:86:50 (try 2/3)
>[  149.084055] wlan0: direct probe to 00:26:cb:4e:86:50 (try 3/3)
>[  149.285056] wlan0: authentication with 00:26:cb:4e:86:50 timed out
>[  157.323597] wlan0: authenticate with 00:26:cb:a1:4a:df
>[  157.330512] wlan0: direct probe to 00:26:cb:a1:4a:df (try 1/3)
>[  157.531026] wlan0: direct probe to 00:26:cb:a1:4a:df (try 2/3)
>[  157.732035] wlan0: direct probe to 00:26:cb:a1:4a:df (try 3/3)
>[  157.933025] wlan0: authentication with 00:26:cb:a1:4a:df timed out
>[  161.973765] wlan0: authenticate with 00:26:cb:4e:90:c0
>[  161.979494] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 1/3)
>[  162.180043] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 2/3)
>[  162.381044] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 3/3)
>[  162.582036] wlan0: authentication with 00:26:cb:4e:90:c0 timed out
>[  163.074523] wlan0: authenticate with 00:26:cb:4e:90:f0
>[  163.081811] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 1/3)
>[  163.282044] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 2/3)
>[  163.483043] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 3/3)
>[  163.684051] wlan0: authentication with 00:26:cb:4e:90:f0 timed out
>[  164.176986] wlan0: authenticate with 00:26:cb:4e:92:00
>[  164.182573] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[  164.383028] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[  164.584052] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[  164.785053] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[  165.278925] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[  165.284572] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[  165.485026] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[  165.686054] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[  165.887051] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[  166.380723] wlan0: authenticate with 00:26:cb:4e:7f:d0
>[  166.385336] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 1/3)
>[  166.586064] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 2/3)
>[  166.787057] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 3/3)
>[  166.988051] wlan0: authentication with 00:26:cb:4e:7f:d0 timed out
>[  167.480893] wlan0: authenticate with 00:26:cb:4e:91:d0
>[  167.487362] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 1/3)
>[  167.688055] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 2/3)
>[  167.889051] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 3/3)
>[  168.090054] wlan0: authentication with 00:26:cb:4e:91:d0 timed out
>[  168.582952] wlan0: authenticate with 00:26:cb:4e:90:cf
>[  168.587862] wlan0: direct probe to 00:26:cb:4e:90:cf (try 1/3)
>[  168.788055] wlan0: direct probe to 00:26:cb:4e:90:cf (try 2/3)
>[  168.989055] wlan0: direct probe to 00:26:cb:4e:90:cf (try 3/3)
>[  169.190037] wlan0: authentication with 00:26:cb:4e:90:cf timed out
>[  169.683160] wlan0: authenticate with 00:26:cb:4e:8f:d0
>[  169.691513] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 1/3)
>[  169.892058] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 2/3)
>[  170.093053] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 3/3)
>[  170.294057] wlan0: authentication with 00:26:cb:4e:8f:d0 timed out
>[  170.722773] wlan0: authenticate with 00:26:cb:4e:8c:4f
>[  170.729478] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 1/3)
>[  170.930057] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 2/3)
>[  171.131059] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 3/3)
>[  171.332051] wlan0: authentication with 00:26:cb:4e:8c:4f timed out
>[  171.697197] wlan0: authenticate with 00:26:cb:4e:86:5f
>[  171.703484] wlan0: direct probe to 00:26:cb:4e:86:5f (try 1/3)
>[  171.904058] wlan0: direct probe to 00:26:cb:4e:86:5f (try 2/3)
>[  172.105056] wlan0: direct probe to 00:26:cb:4e:86:5f (try 3/3)
>[  172.306051] wlan0: authentication with 00:26:cb:4e:86:5f timed out
>[  172.670992] wlan0: authenticate with 00:26:cb:a1:4a:df
>[  172.677572] wlan0: direct probe to 00:26:cb:a1:4a:df (try 1/3)
>[  172.878055] wlan0: direct probe to 00:26:cb:a1:4a:df (try 2/3)
>[  173.079045] wlan0: direct probe to 00:26:cb:a1:4a:df (try 3/3)
>[  173.280050] wlan0: authentication with 00:26:cb:a1:4a:df timed out
>[  173.582094] wlan0: authenticate with 00:26:cb:4e:90:ff
>[  173.588579] wlan0: direct probe to 00:26:cb:4e:90:ff (try 1/3)
>[  173.789060] wlan0: direct probe to 00:26:cb:4e:90:ff (try 2/3)
>[  173.990055] wlan0: direct probe to 00:26:cb:4e:90:ff (try 3/3)
>[  174.191027] wlan0: authentication with 00:26:cb:4e:90:ff timed out
>[  174.427969] wlan0: authenticate with 00:26:cb:a1:59:f0
>[  174.434611] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 1/3)
>[  174.635061] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 2/3)
>[  174.836056] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 3/3)
>[  175.037053] wlan0: authentication with 00:26:cb:a1:59:f0 timed out
>[  175.273853] wlan0: authenticate with 00:26:cb:4e:91:60
>[  175.279452] wlan0: direct probe to 00:26:cb:4e:91:60 (try 1/3)
>[  175.480031] wlan0: direct probe to 00:26:cb:4e:91:60 (try 2/3)
>[  175.681036] wlan0: direct probe to 00:26:cb:4e:91:60 (try 3/3)
>[  175.882034] wlan0: authentication with 00:26:cb:4e:91:60 timed out
>[  176.054811] wlan0: authenticate with 00:26:cb:4e:8c:40
>[  176.060443] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 1/3)
>[  176.261055] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 2/3)
>[  176.462057] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 3/3)
>[  176.663024] wlan0: authentication with 00:26:cb:4e:8c:40 timed out
>[  185.898336] wlan0: authenticate with 00:26:cb:4e:92:0f
>[  185.907342] wlan0: direct probe to 00:26:cb:4e:92:0f (try 1/3)
>[  186.108069] wlan0: direct probe to 00:26:cb:4e:92:0f (try 2/3)
>[  186.309059] wlan0: direct probe to 00:26:cb:4e:92:0f (try 3/3)
>[  186.510028] wlan0: authentication with 00:26:cb:4e:92:0f timed out
>[  190.546883] wlan0: authenticate with 00:26:cb:4e:92:00
>[  190.553125] wlan0: direct probe to 00:26:cb:4e:92:00 (try 1/3)
>[  190.754044] wlan0: direct probe to 00:26:cb:4e:92:00 (try 2/3)
>[  190.955057] wlan0: direct probe to 00:26:cb:4e:92:00 (try 3/3)
>[  191.156043] wlan0: authentication with 00:26:cb:4e:92:00 timed out
>[  191.648613] wlan0: authenticate with 00:26:cb:4e:90:c0
>[  191.656542] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 1/3)
>[  191.857046] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 2/3)
>[  192.058046] wlan0: direct probe to 00:26:cb:4e:90:c0 (try 3/3)
>[  192.259057] wlan0: authentication with 00:26:cb:4e:90:c0 timed out
>[  192.687677] wlan0: authenticate with 00:26:cb:a1:4a:d0
>[  192.694957] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 1/3)
>[  192.895027] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 2/3)
>[  193.096046] wlan0: direct probe to 00:26:cb:a1:4a:d0 (try 3/3)
>[  193.297026] wlan0: authentication with 00:26:cb:a1:4a:d0 timed out
>[  193.731217] wlan0: authenticate with 00:26:cb:4e:90:f0
>[  193.736618] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 1/3)
>[  193.937057] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 2/3)
>[  194.138055] wlan0: direct probe to 00:26:cb:4e:90:f0 (try 3/3)
>[  194.339052] wlan0: authentication with 00:26:cb:4e:90:f0 timed out
>[  194.768173] wlan0: authenticate with 00:26:cb:4e:91:d0
>[  194.774226] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 1/3)
>[  194.975034] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 2/3)
>[  195.176072] wlan0: direct probe to 00:26:cb:4e:91:d0 (try 3/3)
>[  195.377057] wlan0: authentication with 00:26:cb:4e:91:d0 timed out
>[  195.805048] wlan0: authenticate with 00:26:cb:4e:90:cf
>[  195.812515] wlan0: direct probe to 00:26:cb:4e:90:cf (try 1/3)
>[  196.013053] wlan0: direct probe to 00:26:cb:4e:90:cf (try 2/3)
>[  196.214045] wlan0: direct probe to 00:26:cb:4e:90:cf (try 3/3)
>[  196.415052] wlan0: authentication with 00:26:cb:4e:90:cf timed out
>[  196.844222] wlan0: authenticate with 00:26:cb:4e:7f:d0
>[  196.850288] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 1/3)
>[  197.051062] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 2/3)
>[  197.252053] wlan0: direct probe to 00:26:cb:4e:7f:d0 (try 3/3)
>[  197.453040] wlan0: authentication with 00:26:cb:4e:7f:d0 timed out
>[  197.882901] wlan0: authenticate with 00:26:cb:4e:8f:d0
>[  197.887471] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 1/3)
>[  198.088059] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 2/3)
>[  198.289054] wlan0: direct probe to 00:26:cb:4e:8f:d0 (try 3/3)
>[  198.490055] wlan0: authentication with 00:26:cb:4e:8f:d0 timed out
>[  198.854539] wlan0: authenticate with 00:26:cb:4e:8c:4f
>[  198.861792] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 1/3)
>[  199.062058] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 2/3)
>[  199.263026] wlan0: direct probe to 00:26:cb:4e:8c:4f (try 3/3)
>[  199.464056] wlan0: authentication with 00:26:cb:4e:8c:4f timed out
>[  199.764781] wlan0: authenticate with 00:26:cb:a1:4a:df
>[  199.771226] wlan0: direct probe to 00:26:cb:a1:4a:df (try 1/3)
>[  199.972045] wlan0: direct probe to 00:26:cb:a1:4a:df (try 2/3)
>[  200.173026] wlan0: direct probe to 00:26:cb:a1:4a:df (try 3/3)
>[  200.374049] wlan0: authentication with 00:26:cb:a1:4a:df timed out
>[  200.611308] wlan0: authenticate with 00:26:cb:4e:91:60
>[  200.617432] wlan0: direct probe to 00:26:cb:4e:91:60 (try 1/3)
>[  200.818026] wlan0: direct probe to 00:26:cb:4e:91:60 (try 2/3)
>[  201.019056] wlan0: direct probe to 00:26:cb:4e:91:60 (try 3/3)
>[  201.220051] wlan0: authentication with 00:26:cb:4e:91:60 timed out
>[  201.471930] wlan0: authenticate with 00:26:cb:4e:8c:40
>[  201.476552] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 1/3)
>[  201.677058] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 2/3)
>[  201.878055] wlan0: direct probe to 00:26:cb:4e:8c:40 (try 3/3)
>[  202.079053] wlan0: authentication with 00:26:cb:4e:8c:40 timed out
>[  202.252147] wlan0: authenticate with 00:26:cb:a1:59:f0
>[  202.257535] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 1/3)
>[  202.458028] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 2/3)
>[  202.659057] wlan0: direct probe to 00:26:cb:a1:59:f0 (try 3/3)
>[  202.860052] wlan0: authentication with 00:26:cb:a1:59:f0 timed out
>[  206.894583] wlan0: authenticate with 00:26:cb:4e:92:0f
>[  206.904174] wlan0: direct probe to 00:26:cb:4e:92:0f (try 1/3)
>[  207.105027] wlan0: direct probe to 00:26:cb:4e:92:0f (try 2/3)
>[  207.306056] wlan0: direct probe to 00:26:cb:4e:92:0f (try 3/3)
>[  207.507066] wlan0: authentication with 00:26:cb:4e:92:0f timed out
>[  696.038459] PM: Syncing filesystems ... done.
>[  696.040709] PM: Preparing system for mem sleep
>[  696.149339] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  696.160107] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  696.171089] PM: Entering mem sleep
>[  696.171140] Suspending console(s) (use no_console_suspend to debug)
>[  696.171551] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  696.172359] sd 0:0:0:0: [sda] Stopping disk
>[  696.192691] serial 00:0a: disabled
>[  696.193272] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[  696.193301] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[  696.194099] ACPI handle has no context!
>[  696.196665] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[  696.208147] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[  696.766189] PM: suspend of devices complete after 594.797 msecs
>[  696.766325] PM: late suspend of devices complete after 0.132 msecs
>[  696.777283] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  696.788037] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[  696.788125] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[  696.798031] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  696.798035] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[  696.798119] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  696.809038] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[  696.809136] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[  696.809140] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[  696.809217] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  696.809269] PM: noirq suspend of devices complete after 42.939 msecs
>[  696.809748] ACPI: Preparing to enter system sleep state S3
>[  696.852058] PM: Saving platform NVS memory
>[  696.852582] Disabling non-boot CPUs ...
>[  696.853966] smpboot: CPU 1 is now offline
>[  696.854643] Extended CMOS year: 2000
>[  696.854643] ACPI: Low-level resume complete
>[  696.854643] PM: Restoring platform NVS memory
>[  696.854643] Extended CMOS year: 2000
>[  696.854643] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[  696.871460] Enabling non-boot CPUs ...
>[  696.871661] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  696.889012] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[  696.896031] CPU1 is up
>[  696.898383] ACPI: Waking up from system sleep state S3
>[  697.123232] i915 0000:00:02.0: power state changed by ACPI to D0
>[  697.145297] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  697.145303] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[  697.145376] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[  697.145380] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[  697.156229] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  697.167510] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[  697.177156] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  697.177238] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[  697.177243] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[  697.188232] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  697.232437] PM: noirq resume of devices complete after 109.273 msecs
>[  697.232555] PM: early resume of devices complete after 0.070 msecs
>[  697.232599] i915 0000:00:02.0: setting latency timer to 64
>[  697.232690] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[  697.234359] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[  697.244998] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  697.245038] usb usb3: root hub lost power or was reset
>[  697.245058] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[  697.245085] usb usb4: root hub lost power or was reset
>[  697.245104] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  697.245183] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[  697.245245] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[  697.245256] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[  697.245267] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  697.245295] usb usb5: root hub lost power or was reset
>[  697.245312] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  697.245339] usb usb6: root hub lost power or was reset
>[  697.245357] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  697.245383] pci 0000:00:1e.0: setting latency timer to 64
>[  697.245398] ata_piix 0000:00:1f.2: setting latency timer to 64
>[  697.245433] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  697.246452] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  697.290919] serial 00:0a: activated
>[  697.562068] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[  697.799077] firewire_core 0000:05:00.1: rediscovered device fw0
>[  700.325254] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[  700.325258] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[  700.325262] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[  700.325265] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[  700.325268] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  700.366233] ata1.00: configured for UDMA/100
>[  700.366286] sd 0:0:0:0: [sda] Starting disk
>[  700.511222] PM: resume of devices complete after 3278.663 msecs
>[  700.511395] PM: Finishing wakeup.
>[  700.511396] Restarting tasks ... done.
>[  700.537809] video LNXVIDEO:00: Restoring backlight state
>[  700.596091] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  700.656195] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  700.717070] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  700.777075] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[  701.132202] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[  701.233188] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[  701.233387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  707.351433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  715.290892] wlan0: authenticate with 00:26:cb:4e:85:4f
>[  715.300629] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[  715.301270] wlan0: authenticated
>[  715.301488] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  715.308223] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[  715.422961] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[  715.423172] wlan0: associated
>[  715.423218] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  715.423289] cfg80211: Calling CRDA for country: US
>[  715.427738] ath: regdomain 0x8348 updated by CountryIE
>[  715.427741] ath: EEPROM regdomain: 0x8348
>[  715.427743] ath: EEPROM indicates we should expect a country code
>[  715.427745] ath: doing EEPROM country->regdmn map search
>[  715.427747] ath: country maps to regdmn code: 0x3a
>[  715.427749] ath: Country alpha2 being used: US
>[  715.427750] ath: Regpair used: 0x3a
>[  715.427752] cfg80211: Regulatory domain changed to country: US
>[  715.427754] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  715.427756] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[  715.427759] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[  715.427761] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  715.427764] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  715.427766] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  715.427768] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[  914.121603] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  934.069178] wlan0: authenticate with 00:26:cb:4e:85:40
>[  934.073896] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[  934.274035] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[  934.475018] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[  934.676074] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[  935.100381] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[  935.107387] cfg80211: Calling CRDA to update world regulatory domain
>[  935.107509] wlan0: authenticate with 00:26:cb:4e:82:60
>[  935.113496] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[  935.116399] cfg80211: World regulatory domain updated:
>[  935.116403] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  935.116406] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.116409] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  935.116411] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  935.116414] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.116416] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.116436] cfg80211: Calling CRDA for country: US
>[  935.125651] cfg80211: Regulatory domain changed to country: US
>[  935.125655] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  935.125658] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[  935.125661] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[  935.125663] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.125666] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.125668] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  935.125670] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[  935.729095] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[  936.087685] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[  936.381465] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[  936.385226] wlan0: authenticate with 00:26:cb:4e:86:b0
>[  936.389455] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[  936.690233] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[  936.918291] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[  937.119019] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[  941.172482] wlan0: authenticate with 00:26:cb:4e:82:50
>[  941.180626] wlan0: direct probe to 00:26:cb:4e:82:50 (try 1/3)
>[  941.381018] wlan0: direct probe to 00:26:cb:4e:82:50 (try 2/3)
>[  941.582023] wlan0: direct probe to 00:26:cb:4e:82:50 (try 3/3)
>[  941.783017] wlan0: authentication with 00:26:cb:4e:82:50 timed out
>[  945.877502] wlan0: authenticate with 00:26:cb:4e:82:60
>[  945.885350] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[  946.086018] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[  946.287028] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[  946.491314] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[  946.980701] wlan0: authenticate with 00:26:cb:4e:85:4f
>[  946.985840] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[  946.986724] wlan0: authenticated
>[  946.991217] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  946.999023] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[  947.000632] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[  947.000877] wlan0: associated
>[  947.000931] cfg80211: Calling CRDA for country: US
>[  947.005790] ath: regdomain 0x8348 updated by CountryIE
>[  947.005793] ath: EEPROM regdomain: 0x8348
>[  947.005795] ath: EEPROM indicates we should expect a country code
>[  947.005797] ath: doing EEPROM country->regdmn map search
>[  947.005799] ath: country maps to regdmn code: 0x3a
>[  947.005801] ath: Country alpha2 being used: US
>[  947.005802] ath: Regpair used: 0x3a
>[  947.005804] cfg80211: Regulatory domain changed to country: US
>[  947.005806] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  947.005808] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[  947.005811] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[  947.005813] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  947.005816] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  947.005818] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  947.005821] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 1069.110167] wlan0: authenticate with 00:26:cb:4e:85:40
>[ 1069.115309] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[ 1069.316020] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[ 1069.517044] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[ 1069.718055] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[ 1070.272813] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[ 1070.278043] cfg80211: Calling CRDA to update world regulatory domain
>[ 1070.279780] wlan0: authenticate with 00:26:cb:4e:85:4f
>[ 1070.284531] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[ 1070.284726] cfg80211: World regulatory domain updated:
>[ 1070.284728] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1070.284731] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.284734] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1070.284736] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1070.284739] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.284741] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.284753] cfg80211: Calling CRDA for country: US
>[ 1070.285099] wlan0: authenticated
>[ 1070.286907] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1070.292189] cfg80211: Regulatory domain changed to country: US
>[ 1070.292193] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1070.292195] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 1070.292198] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 1070.292200] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.292203] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.292205] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.292207] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 1070.294030] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[ 1070.295812] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[ 1070.296143] wlan0: associated
>[ 1070.296200] cfg80211: Calling CRDA for country: US
>[ 1070.300213] ath: regdomain 0x8348 updated by CountryIE
>[ 1070.300217] ath: EEPROM regdomain: 0x8348
>[ 1070.300218] ath: EEPROM indicates we should expect a country code
>[ 1070.300221] ath: doing EEPROM country->regdmn map search
>[ 1070.300223] ath: country maps to regdmn code: 0x3a
>[ 1070.300224] ath: Country alpha2 being used: US
>[ 1070.300226] ath: Regpair used: 0x3a
>[ 1070.300228] cfg80211: Regulatory domain changed to country: US
>[ 1070.300229] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1070.300232] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 1070.300234] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 1070.300237] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.300239] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.300241] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1070.300243] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 1506.003821] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[ 2106.003705] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[ 2200.394415] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[ 2200.405141] cfg80211: Calling CRDA to update world regulatory domain
>[ 2200.410402] cfg80211: World regulatory domain updated:
>[ 2200.410406] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2200.410409] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.410411] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2200.410414] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2200.410416] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.410419] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.410440] cfg80211: Calling CRDA for country: US
>[ 2200.427611] cfg80211: Regulatory domain changed to country: US
>[ 2200.427616] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2200.427619] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2200.427621] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2200.427624] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.427626] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.427629] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2200.427631] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2201.592911] PM: Syncing filesystems ... done.
>[ 2201.596879] PM: Preparing system for mem sleep
>[ 2201.704051] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 2201.715124] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2201.726094] PM: Entering mem sleep
>[ 2201.726134] Suspending console(s) (use no_console_suspend to debug)
>[ 2201.726513] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2201.746001] serial 00:0a: disabled
>[ 2201.746517] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[ 2201.746550] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[ 2201.748071] ACPI handle has no context!
>[ 2201.749814] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[ 2201.758148] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[ 2201.785933] sd 0:0:0:0: [sda] Stopping disk
>[ 2202.380170] PM: suspend of devices complete after 653.781 msecs
>[ 2202.380306] PM: late suspend of devices complete after 0.133 msecs
>[ 2202.391263] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[ 2202.402034] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[ 2202.402135] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[ 2202.412033] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[ 2202.412038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[ 2202.412341] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[ 2202.423039] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[ 2202.423136] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[ 2202.423140] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[ 2202.423219] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[ 2202.423272] PM: noirq suspend of devices complete after 42.961 msecs
>[ 2202.423749] ACPI: Preparing to enter system sleep state S3
>[ 2202.466058] PM: Saving platform NVS memory
>[ 2202.467053] Disabling non-boot CPUs ...
>[ 2202.468499] smpboot: CPU 1 is now offline
>[ 2202.469651] Extended CMOS year: 2000
>[ 2202.469651] ACPI: Low-level resume complete
>[ 2202.469651] PM: Restoring platform NVS memory
>[ 2202.469651] Extended CMOS year: 2000
>[ 2202.469651] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[ 2202.486470] Enabling non-boot CPUs ...
>[ 2202.486667] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2202.504011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[ 2202.511038] CPU1 is up
>[ 2202.513402] ACPI: Waking up from system sleep state S3
>[ 2202.696219] i915 0000:00:02.0: power state changed by ACPI to D0
>[ 2202.718328] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[ 2202.718333] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[ 2202.718403] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[ 2202.718408] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[ 2202.729223] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[ 2202.740506] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[ 2202.750159] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[ 2202.750232] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[ 2202.750237] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[ 2202.761240] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[ 2202.805437] PM: noirq resume of devices complete after 109.292 msecs
>[ 2202.805556] PM: early resume of devices complete after 0.071 msecs
>[ 2202.805601] i915 0000:00:02.0: setting latency timer to 64
>[ 2202.805685] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[ 2202.807111] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2202.817859] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 2202.817888] usb usb3: root hub lost power or was reset
>[ 2202.817907] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[ 2202.817933] usb usb4: root hub lost power or was reset
>[ 2202.817952] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 2202.818043] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[ 2202.818104] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[ 2202.818115] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[ 2202.818127] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2202.818154] usb usb5: root hub lost power or was reset
>[ 2202.818171] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2202.818198] usb usb6: root hub lost power or was reset
>[ 2202.818217] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2202.818243] pci 0000:00:1e.0: setting latency timer to 64
>[ 2202.818258] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 2202.818293] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2202.819313] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2202.880492] serial 00:0a: activated
>[ 2203.135052] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 2203.372081] firewire_core 0000:05:00.1: rediscovered device fw0
>[ 2205.848737] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[ 2205.848741] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 2205.848745] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 2205.848748] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2205.848751] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2205.889230] ata1.00: configured for UDMA/100
>[ 2205.889291] sd 0:0:0:0: [sda] Starting disk
>[ 2206.028185] PM: resume of devices complete after 3222.625 msecs
>[ 2206.028355] PM: Finishing wakeup.
>[ 2206.028357] Restarting tasks ... done.
>[ 2206.062030] video LNXVIDEO:00: Restoring backlight state
>[ 2206.123024] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2206.184170] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2206.241327] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2206.302023] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2206.587242] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2206.688108] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2206.688241] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 2206.705211] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2214.972515] wlan0: authenticate with 00:26:cb:4e:85:4f
>[ 2214.984924] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[ 2214.985430] wlan0: authenticated
>[ 2214.985631] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2214.991022] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[ 2215.192030] wlan0: associate with 00:26:cb:4e:85:4f (try 2/3)
>[ 2215.290872] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[ 2215.291118] wlan0: associated
>[ 2215.291158] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 2215.291229] cfg80211: Calling CRDA for country: US
>[ 2215.297940] ath: regdomain 0x8348 updated by CountryIE
>[ 2215.297944] ath: EEPROM regdomain: 0x8348
>[ 2215.297946] ath: EEPROM indicates we should expect a country code
>[ 2215.297948] ath: doing EEPROM country->regdmn map search
>[ 2215.297950] ath: country maps to regdmn code: 0x3a
>[ 2215.297952] ath: Country alpha2 being used: US
>[ 2215.297953] ath: Regpair used: 0x3a
>[ 2215.297955] cfg80211: Regulatory domain changed to country: US
>[ 2215.297956] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2215.297959] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2215.297962] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2215.297964] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2215.297966] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2215.297969] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2215.297971] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2239.100288] wlan0: authenticate with 00:26:cb:4e:85:40
>[ 2239.106326] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[ 2239.307032] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[ 2239.508049] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[ 2239.709061] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[ 2240.263107] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[ 2240.265069] cfg80211: Calling CRDA to update world regulatory domain
>[ 2240.267630] wlan0: authenticate with 00:26:cb:4e:85:4f
>[ 2240.273722] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[ 2240.274173] wlan0: authenticated
>[ 2240.274325] cfg80211: World regulatory domain updated:
>[ 2240.274328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2240.274331] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.274333] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2240.274336] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2240.274338] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.274340] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.274353] cfg80211: Calling CRDA for country: US
>[ 2240.275458] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2240.286345] cfg80211: Regulatory domain changed to country: US
>[ 2240.286349] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2240.286352] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2240.286355] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2240.286357] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.286359] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.286362] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.286364] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2240.287081] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[ 2240.288521] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[ 2240.288823] wlan0: associated
>[ 2240.288880] cfg80211: Calling CRDA for country: US
>[ 2240.292734] ath: regdomain 0x8348 updated by CountryIE
>[ 2240.292738] ath: EEPROM regdomain: 0x8348
>[ 2240.292739] ath: EEPROM indicates we should expect a country code
>[ 2240.292742] ath: doing EEPROM country->regdmn map search
>[ 2240.292744] ath: country maps to regdmn code: 0x3a
>[ 2240.292745] ath: Country alpha2 being used: US
>[ 2240.292747] ath: Regpair used: 0x3a
>[ 2240.292749] cfg80211: Regulatory domain changed to country: US
>[ 2240.292750] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2240.292753] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2240.292755] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2240.292758] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.292760] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.292762] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2240.292765] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2339.008602] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[ 2560.420685] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 2924.072954] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[ 2924.089711] cfg80211: Calling CRDA to update world regulatory domain
>[ 2924.098924] cfg80211: World regulatory domain updated:
>[ 2924.098929] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2924.098932] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.098934] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2924.098937] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2924.098939] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.098942] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.098958] cfg80211: Calling CRDA for country: US
>[ 2924.109458] cfg80211: Regulatory domain changed to country: US
>[ 2924.109462] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2924.109465] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2924.109468] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2924.109471] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.109473] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.109475] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2924.109478] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 2925.689854] PM: Syncing filesystems ... done.
>[ 2925.694075] PM: Preparing system for mem sleep
>[ 2925.797304] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[ 2925.808126] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[ 2925.819092] PM: Entering mem sleep
>[ 2925.819132] Suspending console(s) (use no_console_suspend to debug)
>[ 2925.819501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[ 2925.836972] serial 00:0a: disabled
>[ 2925.837747] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[ 2925.837778] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[ 2925.839090] ACPI handle has no context!
>[ 2925.841070] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[ 2925.849115] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[ 2925.897473] sd 0:0:0:0: [sda] Stopping disk
>[ 2926.492158] PM: suspend of devices complete after 672.772 msecs
>[ 2926.492299] PM: late suspend of devices complete after 0.137 msecs
>[ 2926.503241] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[ 2926.514035] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[ 2926.514121] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[ 2926.524034] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[ 2926.524039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[ 2926.524332] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[ 2926.535034] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[ 2926.535130] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[ 2926.535134] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[ 2926.535216] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[ 2926.535268] PM: noirq suspend of devices complete after 42.965 msecs
>[ 2926.535743] ACPI: Preparing to enter system sleep state S3
>[ 2926.578059] PM: Saving platform NVS memory
>[ 2926.578636] Disabling non-boot CPUs ...
>[ 2926.580073] smpboot: CPU 1 is now offline
>[ 2926.580740] Extended CMOS year: 2000
>[ 2926.580740] ACPI: Low-level resume complete
>[ 2926.580740] PM: Restoring platform NVS memory
>[ 2926.580740] Extended CMOS year: 2000
>[ 2926.580740] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[ 2926.597568] Enabling non-boot CPUs ...
>[ 2926.597769] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2926.627008] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[ 2926.634047] CPU1 is up
>[ 2926.636386] ACPI: Waking up from system sleep state S3
>[ 2926.703136] Monitor-Mwait will be used to enter C-3 state
>[ 2926.824157] i915 0000:00:02.0: power state changed by ACPI to D0
>[ 2926.846232] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[ 2926.846237] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[ 2926.846316] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[ 2926.846321] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[ 2926.857154] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[ 2926.868402] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[ 2926.878074] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[ 2926.878161] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[ 2926.878165] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[ 2926.889170] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[ 2926.933359] PM: noirq resume of devices complete after 109.269 msecs
>[ 2926.933519] PM: early resume of devices complete after 0.063 msecs
>[ 2926.933571] i915 0000:00:02.0: setting latency timer to 64
>[ 2926.933586] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[ 2926.936562] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2926.947198] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[ 2926.947228] usb usb3: root hub lost power or was reset
>[ 2926.947247] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[ 2926.947274] usb usb4: root hub lost power or was reset
>[ 2926.947293] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[ 2926.947372] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[ 2926.947435] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[ 2926.947447] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[ 2926.947458] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[ 2926.947486] usb usb5: root hub lost power or was reset
>[ 2926.947502] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[ 2926.947529] usb usb6: root hub lost power or was reset
>[ 2926.947548] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[ 2926.947574] pci 0000:00:1e.0: setting latency timer to 64
>[ 2926.947589] ata_piix 0000:00:1f.2: setting latency timer to 64
>[ 2926.947818] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2926.948872] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2926.966876] serial 00:0a: activated
>[ 2927.263051] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[ 2927.501080] firewire_core 0000:05:00.1: rediscovered device fw0
>[ 2929.985415] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[ 2929.985418] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[ 2929.985420] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[ 2929.985423] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[ 2929.985425] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[ 2930.026246] ata1.00: configured for UDMA/100
>[ 2930.026405] sd 0:0:0:0: [sda] Starting disk
>[ 2930.029804] Extended CMOS year: 2000
>[ 2930.164397] PM: resume of devices complete after 3230.874 msecs
>[ 2930.164584] PM: Finishing wakeup.
>[ 2930.164586] Restarting tasks ... done.
>[ 2930.187213] video LNXVIDEO:00: Restoring backlight state
>[ 2930.244068] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2930.303429] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2930.363026] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2930.429100] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[ 2930.752192] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2930.853143] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[ 2930.853308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 2930.866372] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 2939.180598] wlan0: authenticate with 00:26:cb:4e:85:40
>[ 2939.194300] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[ 2939.395049] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[ 2939.596037] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[ 2939.797043] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[ 2940.229107] wlan0: authenticate with 00:26:cb:4e:82:60
>[ 2940.237636] wlan0: send auth to 00:26:cb:4e:82:60 (try 1/3)
>[ 2940.240807] wlan0: authenticated
>[ 2940.242515] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2940.247049] wlan0: associate with 00:26:cb:4e:82:60 (try 1/3)
>[ 2940.385219] wlan0: RX AssocResp from 00:26:cb:4e:82:60 (capab=0x431 status=0 aid=23)
>[ 2940.385687] wlan0: associated
>[ 2940.385751] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 2940.385877] cfg80211: Calling CRDA for country: US
>[ 2940.398087] ath: regdomain 0x8348 updated by CountryIE
>[ 2940.398095] ath: EEPROM regdomain: 0x8348
>[ 2940.398099] ath: EEPROM indicates we should expect a country code
>[ 2940.398104] ath: doing EEPROM country->regdmn map search
>[ 2940.398108] ath: country maps to regdmn code: 0x3a
>[ 2940.398112] ath: Country alpha2 being used: US
>[ 2940.398115] ath: Regpair used: 0x3a
>[ 2940.398119] cfg80211: Regulatory domain changed to country: US
>[ 2940.398122] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2940.398128] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 2940.398134] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 2940.398139] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2940.398145] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2940.398150] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2940.398155] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 4487.448178] wlan0: authenticate with 00:26:cb:4e:85:4f
>[ 4487.452928] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[ 4487.458511] wlan0: authenticated
>[ 4487.458670] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 4487.463034] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[ 4487.464926] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=2)
>[ 4487.465296] wlan0: associated
>[ 4787.756197] wlan0: authenticate with 00:26:cb:4e:82:60
>[ 4787.761222] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[ 4787.962048] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[ 4788.163045] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[ 4788.364044] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[ 4788.726845] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[ 4788.731482] cfg80211: Calling CRDA to update world regulatory domain
>[ 4788.733266] wlan0: authenticate with 00:26:cb:4e:86:b0
>[ 4788.741919] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[ 4788.748063] cfg80211: World regulatory domain updated:
>[ 4788.748068] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4788.748070] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.748073] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4788.748076] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 4788.748078] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.748080] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.748103] cfg80211: Calling CRDA for country: US
>[ 4788.751657] cfg80211: Regulatory domain changed to country: US
>[ 4788.751661] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4788.751664] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 4788.751666] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 4788.751669] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.751671] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.751674] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4788.751676] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 4789.045330] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[ 4789.246041] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[ 4793.435176] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[ 4793.662995] wlan0: authenticate with 00:26:cb:4e:86:bf
>[ 4793.667944] wlan0: direct probe to 00:26:cb:4e:86:bf (try 1/3)
>[ 4793.868043] wlan0: direct probe to 00:26:cb:4e:86:bf (try 2/3)
>[ 4794.069047] wlan0: direct probe to 00:26:cb:4e:86:bf (try 3/3)
>[ 4794.270050] wlan0: authentication with 00:26:cb:4e:86:bf timed out
>[ 4794.442000] wlan0: authenticate with 00:26:cb:4e:85:80
>[ 4794.449595] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[ 4794.650068] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[ 4794.851035] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[ 4795.052046] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[ 4799.152609] wlan0: authenticate with 00:26:cb:4e:82:60
>[ 4799.160971] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[ 4799.361031] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[ 4799.562033] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[ 4799.763065] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[ 4800.255178] wlan0: authenticate with 00:26:cb:4e:85:40
>[ 4800.260880] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[ 4800.461057] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[ 4800.662056] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[ 4800.863035] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[ 4801.290831] wlan0: authenticate with 00:26:cb:4e:85:4f
>[ 4801.299383] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[ 4801.299981] wlan0: authenticated
>[ 4801.300638] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 4801.307046] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[ 4801.308739] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=2)
>[ 4801.309444] wlan0: associated
>[ 4801.309558] cfg80211: Calling CRDA for country: US
>[ 4801.314538] ath: regdomain 0x8348 updated by CountryIE
>[ 4801.314541] ath: EEPROM regdomain: 0x8348
>[ 4801.314543] ath: EEPROM indicates we should expect a country code
>[ 4801.314545] ath: doing EEPROM country->regdmn map search
>[ 4801.314547] ath: country maps to regdmn code: 0x3a
>[ 4801.314549] ath: Country alpha2 being used: US
>[ 4801.314550] ath: Regpair used: 0x3a
>[ 4801.314552] cfg80211: Regulatory domain changed to country: US
>[ 4801.314553] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 4801.314556] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[ 4801.314559] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[ 4801.314561] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4801.314563] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4801.314566] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 4801.314568] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[ 5106.410031] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 5962.706656] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[ 6129.003666] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[ 9009.008169] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[10125.781103] ath5k: ath5k_hw_get_isr: ISR: 0x00001000 IMR: 0x00000000
>[10569.003964] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[11289.007472] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[11727.688929] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[11727.709265] cfg80211: Calling CRDA to update world regulatory domain
>[11727.727206] cfg80211: World regulatory domain updated:
>[11727.727211] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[11727.727214] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.727217] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[11727.727219] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[11727.727222] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.727224] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.727244] cfg80211: Calling CRDA for country: US
>[11727.730856] cfg80211: Regulatory domain changed to country: US
>[11727.730860] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[11727.730863] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[11727.730865] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[11727.730868] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.730870] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.730872] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11727.730875] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[11728.631436] PM: Syncing filesystems ... done.
>[11728.636611] PM: Preparing system for mem sleep
>[11728.717594] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[11728.729135] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[11728.740093] PM: Entering mem sleep
>[11728.740143] Suspending console(s) (use no_console_suspend to debug)
>[11728.740524] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[11728.757737] serial 00:0a: disabled
>[11728.758323] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[11728.758364] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[11728.759101] ACPI handle has no context!
>[11728.761608] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[11728.770112] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[11728.914542] sd 0:0:0:0: [sda] Stopping disk
>[11729.509114] PM: suspend of devices complete after 768.705 msecs
>[11729.509255] PM: late suspend of devices complete after 0.138 msecs
>[11729.520268] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[11729.531034] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[11729.531130] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[11729.541033] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[11729.541038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[11729.541344] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[11729.552038] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[11729.552134] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[11729.552138] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[11729.552220] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[11729.552272] PM: noirq suspend of devices complete after 43.015 msecs
>[11729.552739] ACPI: Preparing to enter system sleep state S3
>[11729.595060] PM: Saving platform NVS memory
>[11729.595629] Disabling non-boot CPUs ...
>[11729.597082] smpboot: CPU 1 is now offline
>[11729.597735] Extended CMOS year: 2000
>[11729.597735] ACPI: Low-level resume complete
>[11729.597735] PM: Restoring platform NVS memory
>[11729.597735] Extended CMOS year: 2000
>[11729.597735] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[11729.614563] Enabling non-boot CPUs ...
>[11729.614760] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[11729.632011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[11729.639036] CPU1 is up
>[11729.641391] ACPI: Waking up from system sleep state S3
>[11729.858236] i915 0000:00:02.0: power state changed by ACPI to D0
>[11729.880315] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[11729.880321] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[11729.880393] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[11729.880397] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[11729.891221] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[11729.902533] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[11729.912153] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[11729.912233] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[11729.912238] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[11729.923237] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[11729.967433] PM: noirq resume of devices complete after 109.264 msecs
>[11729.967551] PM: early resume of devices complete after 0.070 msecs
>[11729.967596] i915 0000:00:02.0: setting latency timer to 64
>[11729.967683] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[11729.969503] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[11729.980172] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[11729.980201] usb usb3: root hub lost power or was reset
>[11729.980220] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[11729.980247] usb usb4: root hub lost power or was reset
>[11729.980266] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[11729.980346] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[11729.980407] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[11729.980418] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[11729.980430] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[11729.980457] usb usb5: root hub lost power or was reset
>[11729.980474] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[11729.980501] usb usb6: root hub lost power or was reset
>[11729.980520] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[11729.980546] pci 0000:00:1e.0: setting latency timer to 64
>[11729.980562] ata_piix 0000:00:1f.2: setting latency timer to 64
>[11729.980597] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11729.981617] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11730.055347] serial 00:0a: activated
>[11730.302061] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[11730.537072] firewire_core 0000:05:00.1: rediscovered device fw0
>[11733.125173] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[11733.125177] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[11733.125181] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[11733.125184] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[11733.125187] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[11733.166231] ata1.00: configured for UDMA/100
>[11733.166269] sd 0:0:0:0: [sda] Starting disk
>[11733.310496] PM: resume of devices complete after 3342.940 msecs
>[11733.310674] PM: Finishing wakeup.
>[11733.310675] Restarting tasks ... done.
>[11733.326213] video LNXVIDEO:00: Restoring backlight state
>[11733.383458] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11733.442482] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11733.503025] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11733.564025] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[11733.914279] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[11734.015124] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[11734.015264] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[11734.026981] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[11742.296137] wlan0: authenticate with 00:26:cb:4e:85:4f
>[11742.307584] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[11742.308121] wlan0: authenticated
>[11742.308417] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[11742.315026] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[11742.456617] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[11742.456850] wlan0: associated
>[11742.456889] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[11742.456970] cfg80211: Calling CRDA for country: US
>[11742.468185] ath: regdomain 0x8348 updated by CountryIE
>[11742.468196] ath: EEPROM regdomain: 0x8348
>[11742.468199] ath: EEPROM indicates we should expect a country code
>[11742.468205] ath: doing EEPROM country->regdmn map search
>[11742.468209] ath: country maps to regdmn code: 0x3a
>[11742.468214] ath: Country alpha2 being used: US
>[11742.468217] ath: Regpair used: 0x3a
>[11742.468222] cfg80211: Regulatory domain changed to country: US
>[11742.468225] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[11742.468231] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[11742.468237] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[11742.468243] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11742.468248] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11742.468253] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[11742.468259] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[11803.004552] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[11826.113059] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[12091.483153] wlan0: authenticate with 00:26:cb:4e:85:40
>[12091.488297] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[12091.689024] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[12091.890024] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[12092.091021] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[12092.515117] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[12092.520768] cfg80211: Calling CRDA to update world regulatory domain
>[12092.523306] wlan0: authenticate with 00:26:cb:4e:85:4f
>[12092.529455] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[12092.529707] cfg80211: World regulatory domain updated:
>[12092.529710] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12092.529713] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.529716] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[12092.529718] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[12092.529721] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.529723] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.529742] cfg80211: Calling CRDA for country: US
>[12092.530067] wlan0: authenticated
>[12092.533645] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[12092.541024] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[12092.541192] cfg80211: Regulatory domain changed to country: US
>[12092.541195] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12092.541198] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[12092.541200] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[12092.541203] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.541205] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.541208] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.541210] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[12092.542666] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[12092.542937] wlan0: associated
>[12092.542994] cfg80211: Calling CRDA for country: US
>[12092.546265] ath: regdomain 0x8348 updated by CountryIE
>[12092.546268] ath: EEPROM regdomain: 0x8348
>[12092.546270] ath: EEPROM indicates we should expect a country code
>[12092.546272] ath: doing EEPROM country->regdmn map search
>[12092.546274] ath: country maps to regdmn code: 0x3a
>[12092.546276] ath: Country alpha2 being used: US
>[12092.546277] ath: Regpair used: 0x3a
>[12092.546279] cfg80211: Regulatory domain changed to country: US
>[12092.546280] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12092.546283] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[12092.546286] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[12092.546288] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.546290] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.546293] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12092.546295] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[12205.345727] SELinux: 2048 avtab hash slots, 103212 rules.
>[12205.370014] SELinux: 2048 avtab hash slots, 103212 rules.
>[12205.596352] SELinux:  9 users, 15 roles, 4213 types, 231 bools, 1 sens, 1024 cats
>[12205.596358] SELinux:  83 classes, 103212 rules
>[12205.602507] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[12205.602510] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[12205.602516] SELinux: the above unknown classes and permissions will be allowed
>[12631.293302] wlan0: authenticate with 00:26:cb:4e:82:60
>[12631.298551] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[12631.499056] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[12631.700054] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[12631.901026] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[12632.265246] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[12632.269220] cfg80211: Calling CRDA to update world regulatory domain
>[12632.270761] wlan0: authenticate with 00:26:cb:4e:85:4f
>[12632.278623] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[12632.279250] wlan0: authenticated
>[12632.284436] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[12632.289030] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[12632.290708] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[12632.291068] wlan0: associated
>[12632.338460] cfg80211: World regulatory domain updated:
>[12632.338466] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12632.338469] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.338471] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[12632.338474] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[12632.338476] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.338479] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.338777] cfg80211: Calling CRDA for country: US
>[12632.341429] cfg80211: Regulatory domain changed to country: US
>[12632.341432] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12632.341435] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[12632.341438] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[12632.341440] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.341442] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.341445] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.341447] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[12632.341468] cfg80211: Calling CRDA for country: US
>[12632.343647] ath: regdomain 0x8348 updated by CountryIE
>[12632.343650] ath: EEPROM regdomain: 0x8348
>[12632.343652] ath: EEPROM indicates we should expect a country code
>[12632.343654] ath: doing EEPROM country->regdmn map search
>[12632.343655] ath: country maps to regdmn code: 0x3a
>[12632.343657] ath: Country alpha2 being used: US
>[12632.343658] ath: Regpair used: 0x3a
>[12632.343660] cfg80211: Regulatory domain changed to country: US
>[12632.343661] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[12632.343664] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[12632.343666] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[12632.343668] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.343670] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.343672] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[12632.343674] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[12892.007913] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[14158.862184] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[14332.008902] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[15519.685265] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[15532.004268] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[15892.008962] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[16094.115291] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[16094.133125] cfg80211: Calling CRDA to update world regulatory domain
>[16094.150690] cfg80211: World regulatory domain updated:
>[16094.150695] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16094.150698] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.150701] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16094.150704] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16094.150706] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.150709] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.150733] cfg80211: Calling CRDA for country: US
>[16094.155898] cfg80211: Regulatory domain changed to country: US
>[16094.155903] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16094.155906] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16094.155909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16094.155911] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.155914] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.155916] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16094.155918] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16095.090512] PM: Syncing filesystems ... done.
>[16095.098723] PM: Preparing system for mem sleep
>[16095.189420] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[16095.201184] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[16095.212115] PM: Entering mem sleep
>[16095.212176] Suspending console(s) (use no_console_suspend to debug)
>[16095.212544] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[16095.229698] serial 00:0a: disabled
>[16095.230211] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[16095.230244] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[16095.231100] ACPI handle has no context!
>[16095.233594] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[16095.242118] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[16095.301656] sd 0:0:0:0: [sda] Stopping disk
>[16095.900081] PM: suspend of devices complete after 687.662 msecs
>[16095.900242] PM: late suspend of devices complete after 0.157 msecs
>[16095.911269] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[16095.922038] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[16095.922137] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[16095.932036] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[16095.932041] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[16095.932339] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[16095.943040] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[16095.943140] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[16095.943144] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[16095.943226] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[16095.943279] PM: noirq suspend of devices complete after 43.033 msecs
>[16095.943754] ACPI: Preparing to enter system sleep state S3
>[16095.986059] PM: Saving platform NVS memory
>[16095.986518] Disabling non-boot CPUs ...
>[16095.987951] smpboot: CPU 1 is now offline
>[16095.989080] Extended CMOS year: 2000
>[16095.989080] ACPI: Low-level resume complete
>[16095.989080] PM: Restoring platform NVS memory
>[16095.989080] Extended CMOS year: 2000
>[16095.989080] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[16096.005917] Enabling non-boot CPUs ...
>[16096.006142] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[16096.023011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[16096.030029] CPU1 is up
>[16096.032383] ACPI: Waking up from system sleep state S3
>[16096.236243] i915 0000:00:02.0: power state changed by ACPI to D0
>[16096.258322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[16096.258328] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[16096.258396] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[16096.258400] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[16096.269233] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[16096.280509] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[16096.290151] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[16096.290228] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[16096.290233] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[16096.301232] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[16096.345436] PM: noirq resume of devices complete after 109.260 msecs
>[16096.345555] PM: early resume of devices complete after 0.070 msecs
>[16096.345599] i915 0000:00:02.0: setting latency timer to 64
>[16096.345685] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[16096.347217] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[16096.357958] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[16096.357988] usb usb3: root hub lost power or was reset
>[16096.358017] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[16096.358045] usb usb4: root hub lost power or was reset
>[16096.358065] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[16096.358143] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[16096.358205] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[16096.358217] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[16096.358228] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[16096.358255] usb usb5: root hub lost power or was reset
>[16096.358272] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[16096.358299] usb usb6: root hub lost power or was reset
>[16096.358317] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[16096.358343] pci 0000:00:1e.0: setting latency timer to 64
>[16096.358358] ata_piix 0000:00:1f.2: setting latency timer to 64
>[16096.358393] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16096.359413] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16096.434617] serial 00:0a: activated
>[16096.681048] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[16096.916073] firewire_core 0000:05:00.1: rediscovered device fw0
>[16099.656820] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[16099.656825] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[16099.656828] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[16099.656832] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[16099.656835] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[16099.697230] ata1.00: configured for UDMA/100
>[16099.697291] sd 0:0:0:0: [sda] Starting disk
>[16099.700191] Extended CMOS year: 2000
>[16099.839203] PM: resume of devices complete after 3493.642 msecs
>[16099.839407] PM: Finishing wakeup.
>[16099.839409] Restarting tasks ... done.
>[16099.864930] video LNXVIDEO:00: Restoring backlight state
>[16099.928026] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16099.990067] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16100.049086] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16100.108487] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[16100.658311] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[16100.759121] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[16100.759256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[16100.773833] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[16109.123901] wlan0: authenticate with 00:26:cb:4e:85:4f
>[16109.135345] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[16109.135910] wlan0: authenticated
>[16109.136308] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16109.142024] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[16109.317106] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[16109.317516] wlan0: associated
>[16109.317588] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[16109.317734] cfg80211: Calling CRDA for country: US
>[16109.331664] ath: regdomain 0x8348 updated by CountryIE
>[16109.331672] ath: EEPROM regdomain: 0x8348
>[16109.331676] ath: EEPROM indicates we should expect a country code
>[16109.331681] ath: doing EEPROM country->regdmn map search
>[16109.331686] ath: country maps to regdmn code: 0x3a
>[16109.331690] ath: Country alpha2 being used: US
>[16109.331694] ath: Regpair used: 0x3a
>[16109.331698] cfg80211: Regulatory domain changed to country: US
>[16109.331701] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16109.331708] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16109.331714] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16109.331719] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16109.331724] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16109.331730] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16109.331735] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16199.735209] wlan0: authenticate with 00:26:cb:4e:82:60
>[16199.740659] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[16199.941033] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[16200.142054] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[16200.343056] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[16200.897860] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[16200.903882] cfg80211: Calling CRDA to update world regulatory domain
>[16200.910355] wlan0: authenticate with 00:26:cb:4e:85:40
>[16200.917151] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[16200.917301] cfg80211: World regulatory domain updated:
>[16200.917304] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16200.917307] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.917309] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16200.917312] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16200.917314] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.917317] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.917332] cfg80211: Calling CRDA for country: US
>[16200.921214] cfg80211: Regulatory domain changed to country: US
>[16200.921218] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16200.921221] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16200.921224] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16200.921226] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.921228] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.921231] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16200.921233] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16201.668520] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[16202.158380] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[16202.580114] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[16202.936688] wlan0: authenticate with 00:26:cb:4e:86:bf
>[16202.946426] wlan0: send auth to 00:26:cb:4e:86:bf (try 1/3)
>[16202.947044] wlan0: authenticated
>[16202.947907] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16202.953042] wlan0: associate with 00:26:cb:4e:86:bf (try 1/3)
>[16202.955000] wlan0: RX AssocResp from 00:26:cb:4e:86:bf (capab=0x11 status=0 aid=3)
>[16202.955603] wlan0: associated
>[16202.955713] cfg80211: Calling CRDA for country: US
>[16202.961317] ath: regdomain 0x8348 updated by CountryIE
>[16202.961324] ath: EEPROM regdomain: 0x8348
>[16202.961328] ath: EEPROM indicates we should expect a country code
>[16202.961333] ath: doing EEPROM country->regdmn map search
>[16202.961337] ath: country maps to regdmn code: 0x3a
>[16202.961342] ath: Country alpha2 being used: US
>[16202.961345] ath: Regpair used: 0x3a
>[16202.961349] cfg80211: Regulatory domain changed to country: US
>[16202.961352] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16202.961359] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16202.961364] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16202.961370] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16202.961375] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16202.961380] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16202.961386] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16239.082694] wlan0: authenticate with 00:26:cb:4e:7b:b0
>[16239.087505] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 1/3)
>[16239.288054] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 2/3)
>[16239.489061] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 3/3)
>[16239.690055] wlan0: authentication with 00:26:cb:4e:7b:b0 timed out
>[16240.116858] wlan0: deauthenticating from 00:26:cb:4e:86:bf by local choice (reason=2)
>[16240.120530] cfg80211: Calling CRDA to update world regulatory domain
>[16240.124435] wlan0: authenticate with 00:26:cb:4e:86:bf
>[16240.132523] wlan0: send auth to 00:26:cb:4e:86:bf (try 1/3)
>[16240.132876] cfg80211: World regulatory domain updated:
>[16240.132883] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16240.132889] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.132895] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16240.132901] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16240.132906] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.132911] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.132941] cfg80211: Calling CRDA for country: US
>[16240.133144] wlan0: authenticated
>[16240.136882] cfg80211: Regulatory domain changed to country: US
>[16240.136886] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16240.136889] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16240.136892] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16240.136894] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.136897] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.136899] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.136901] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16240.137781] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16240.143026] wlan0: associate with 00:26:cb:4e:86:bf (try 1/3)
>[16240.144670] wlan0: RX AssocResp from 00:26:cb:4e:86:bf (capab=0x11 status=0 aid=3)
>[16240.144898] wlan0: associated
>[16240.144968] cfg80211: Calling CRDA for country: US
>[16240.147459] ath: regdomain 0x8348 updated by CountryIE
>[16240.147463] ath: EEPROM regdomain: 0x8348
>[16240.147465] ath: EEPROM indicates we should expect a country code
>[16240.147467] ath: doing EEPROM country->regdmn map search
>[16240.147469] ath: country maps to regdmn code: 0x3a
>[16240.147471] ath: Country alpha2 being used: US
>[16240.147472] ath: Regpair used: 0x3a
>[16240.147474] cfg80211: Regulatory domain changed to country: US
>[16240.147475] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16240.147478] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16240.147481] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16240.147483] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.147486] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.147488] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16240.147490] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16404.623272] cfg80211: Calling CRDA to update world regulatory domain
>[16404.630529] cfg80211: World regulatory domain updated:
>[16404.630537] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16404.630544] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.630550] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16404.630556] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16404.630561] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.630567] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.630608] cfg80211: Calling CRDA for country: US
>[16404.636799] cfg80211: Regulatory domain changed to country: US
>[16404.636807] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16404.636813] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16404.636819] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16404.636825] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.636830] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.636836] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16404.636842] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16404.916129] wlan0: authenticate with 00:26:cb:4e:85:80
>[16404.923471] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[16405.124048] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[16405.325020] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[16405.526040] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[16405.702629] wlan0: authenticate with 00:26:cb:4e:85:8f
>[16405.711980] wlan0: direct probe to 00:26:cb:4e:85:8f (try 1/3)
>[16405.913035] wlan0: direct probe to 00:26:cb:4e:85:8f (try 2/3)
>[16406.114034] wlan0: direct probe to 00:26:cb:4e:85:8f (try 3/3)
>[16406.315054] wlan0: authentication with 00:26:cb:4e:85:8f timed out
>[16410.544051] wlan0: authenticate with 00:26:cb:4e:85:4f
>[16410.550037] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[16410.550586] wlan0: authenticated
>[16410.550761] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16410.556031] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[16410.558263] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[16410.558601] wlan0: associated
>[16410.558657] cfg80211: Calling CRDA for country: US
>[16410.561298] ath: regdomain 0x8348 updated by CountryIE
>[16410.561301] ath: EEPROM regdomain: 0x8348
>[16410.561302] ath: EEPROM indicates we should expect a country code
>[16410.561305] ath: doing EEPROM country->regdmn map search
>[16410.561307] ath: country maps to regdmn code: 0x3a
>[16410.561309] ath: Country alpha2 being used: US
>[16410.561310] ath: Regpair used: 0x3a
>[16410.561312] cfg80211: Regulatory domain changed to country: US
>[16410.561313] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16410.561316] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16410.561319] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16410.561321] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16410.561324] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16410.561326] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16410.561328] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16551.942295] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[16622.006441] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[16712.825281] wlan0: authenticate with 00:26:cb:4e:82:60
>[16712.830565] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[16713.031052] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[16713.232044] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[16713.433028] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[16713.859728] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[16713.865705] cfg80211: Calling CRDA to update world regulatory domain
>[16713.865947] wlan0: authenticate with 00:26:cb:4e:85:40
>[16713.880931] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[16713.883106] cfg80211: World regulatory domain updated:
>[16713.883109] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16713.883112] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.883115] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16713.883117] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16713.883120] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.883122] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.883139] cfg80211: Calling CRDA for country: US
>[16713.886110] cfg80211: Regulatory domain changed to country: US
>[16713.886113] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16713.886116] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16713.886119] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16713.886121] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.886124] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.886126] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16713.886129] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16714.308452] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[16714.539386] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[16714.740088] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[16714.871265] wlan0: authenticate with 00:26:cb:4e:85:80
>[16714.877484] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[16715.078044] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[16715.279058] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[16715.480057] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[16719.645443] wlan0: authenticate with 00:26:cb:4e:86:bf
>[16719.654343] wlan0: direct probe to 00:26:cb:4e:86:bf (try 1/3)
>[16719.855045] wlan0: direct probe to 00:26:cb:4e:86:bf (try 2/3)
>[16720.056061] wlan0: direct probe to 00:26:cb:4e:86:bf (try 3/3)
>[16720.257056] wlan0: authentication with 00:26:cb:4e:86:bf timed out
>[16720.430120] wlan0: authenticate with 00:26:cb:4e:7b:b0
>[16720.437354] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 1/3)
>[16720.638055] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 2/3)
>[16720.839044] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 3/3)
>[16721.040053] wlan0: authentication with 00:26:cb:4e:7b:b0 timed out
>[16725.140678] wlan0: authenticate with 00:26:cb:4e:85:40
>[16725.148071] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[16725.349054] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[16725.550063] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[16725.751026] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[16726.180242] wlan0: authenticate with 00:26:cb:4e:85:4f
>[16726.189873] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[16726.190534] wlan0: authenticated
>[16726.191057] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16726.197025] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[16726.198664] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[16726.198990] wlan0: associated
>[16726.199061] cfg80211: Calling CRDA for country: US
>[16726.201743] ath: regdomain 0x8348 updated by CountryIE
>[16726.201746] ath: EEPROM regdomain: 0x8348
>[16726.201748] ath: EEPROM indicates we should expect a country code
>[16726.201750] ath: doing EEPROM country->regdmn map search
>[16726.201752] ath: country maps to regdmn code: 0x3a
>[16726.201754] ath: Country alpha2 being used: US
>[16726.201755] ath: Regpair used: 0x3a
>[16726.201757] cfg80211: Regulatory domain changed to country: US
>[16726.201759] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16726.201761] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16726.201764] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16726.201766] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16726.201769] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16726.201771] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16726.201773] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16750.344272] wlan0: authenticate with 00:26:cb:4e:82:60
>[16750.349538] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[16750.550057] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[16750.751067] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[16750.952055] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[16751.506898] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[16751.512435] cfg80211: Calling CRDA to update world regulatory domain
>[16751.512701] wlan0: authenticate with 00:26:cb:4e:85:4f
>[16751.525871] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[16751.526125] cfg80211: World regulatory domain updated:
>[16751.526129] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16751.526132] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.526134] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16751.526137] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[16751.526139] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.526142] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.526156] cfg80211: Calling CRDA for country: US
>[16751.526463] wlan0: authenticated
>[16751.527429] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[16751.532325] cfg80211: Regulatory domain changed to country: US
>[16751.532329] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16751.532332] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16751.532335] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16751.532337] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.532340] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.532342] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.532345] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[16751.533040] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[16751.534664] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[16751.534892] wlan0: associated
>[16751.534950] cfg80211: Calling CRDA for country: US
>[16751.537726] ath: regdomain 0x8348 updated by CountryIE
>[16751.537730] ath: EEPROM regdomain: 0x8348
>[16751.537732] ath: EEPROM indicates we should expect a country code
>[16751.537734] ath: doing EEPROM country->regdmn map search
>[16751.537736] ath: country maps to regdmn code: 0x3a
>[16751.537738] ath: Country alpha2 being used: US
>[16751.537740] ath: Regpair used: 0x3a
>[16751.537741] cfg80211: Regulatory domain changed to country: US
>[16751.537743] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[16751.537746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[16751.537748] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[16751.537751] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.537753] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.537755] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[16751.537758] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17002.356196] wlan0: authenticate with 00:26:cb:4e:82:6f
>[17002.360719] wlan0: direct probe to 00:26:cb:4e:82:6f (try 1/3)
>[17002.561036] wlan0: direct probe to 00:26:cb:4e:82:6f (try 2/3)
>[17002.762059] wlan0: direct probe to 00:26:cb:4e:82:6f (try 3/3)
>[17002.963028] wlan0: authentication with 00:26:cb:4e:82:6f timed out
>[17003.390878] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[17003.392699] wlan0: authenticate with 00:26:cb:4e:86:b0
>[17003.401299] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[17003.401428] cfg80211: Calling CRDA to update world regulatory domain
>[17003.404091] cfg80211: World regulatory domain updated:
>[17003.404095] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17003.404098] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.404101] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17003.404103] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17003.404106] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.404108] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.404127] cfg80211: Calling CRDA for country: US
>[17003.407066] cfg80211: Regulatory domain changed to country: US
>[17003.407069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17003.407072] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17003.407075] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17003.407077] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.407079] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.407082] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17003.407084] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17004.024397] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[17004.382954] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[17004.677308] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[17004.905033] wlan0: authenticate with 00:26:cb:4e:85:8f
>[17004.912577] wlan0: direct probe to 00:26:cb:4e:85:8f (try 1/3)
>[17005.113057] wlan0: direct probe to 00:26:cb:4e:85:8f (try 2/3)
>[17005.314050] wlan0: direct probe to 00:26:cb:4e:85:8f (try 3/3)
>[17005.515055] wlan0: authentication with 00:26:cb:4e:85:8f timed out
>[17005.687326] wlan0: authenticate with 00:26:cb:4e:85:80
>[17005.696240] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[17005.897058] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[17006.098054] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[17006.299027] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[17010.399853] wlan0: authenticate with 00:26:cb:4e:82:60
>[17010.406860] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[17010.607028] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[17010.808052] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[17011.009060] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[17011.501644] wlan0: authenticate with 00:26:cb:4e:85:40
>[17011.506123] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[17011.707045] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[17011.908055] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[17012.109046] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[17012.605146] wlan0: authenticate with 00:26:cb:4e:85:4f
>[17012.609882] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[17012.610448] wlan0: authenticated
>[17012.610681] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[17012.619020] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[17012.620447] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[17012.620793] wlan0: associated
>[17012.620860] cfg80211: Calling CRDA for country: US
>[17012.623389] ath: regdomain 0x8348 updated by CountryIE
>[17012.623392] ath: EEPROM regdomain: 0x8348
>[17012.623394] ath: EEPROM indicates we should expect a country code
>[17012.623396] ath: doing EEPROM country->regdmn map search
>[17012.623398] ath: country maps to regdmn code: 0x3a
>[17012.623400] ath: Country alpha2 being used: US
>[17012.623401] ath: Regpair used: 0x3a
>[17012.623403] cfg80211: Regulatory domain changed to country: US
>[17012.623405] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17012.623408] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17012.623410] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17012.623412] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17012.623415] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17012.623417] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17012.623419] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17032.106167] wlan0: authenticate with 00:26:cb:4e:86:b0
>[17032.110460] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[17032.311056] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[17032.512054] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[17032.713054] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[17033.205114] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[17033.209099] cfg80211: Calling CRDA to update world regulatory domain
>[17033.210639] wlan0: authenticate with 00:26:cb:4e:82:6f
>[17033.216640] wlan0: send auth to 00:26:cb:4e:82:6f (try 1/3)
>[17033.217206] wlan0: authenticated
>[17033.217270] cfg80211: World regulatory domain updated:
>[17033.217275] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17033.217282] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.217287] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17033.217293] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17033.217298] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.217304] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.217339] cfg80211: Calling CRDA for country: US
>[17033.224139] cfg80211: Regulatory domain changed to country: US
>[17033.224147] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17033.224154] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17033.224160] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17033.224165] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.224170] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.224176] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.224181] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17033.225971] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[17033.231045] wlan0: associate with 00:26:cb:4e:82:6f (try 1/3)
>[17033.238611] wlan0: RX AssocResp from 00:26:cb:4e:82:6f (capab=0x11 status=0 aid=3)
>[17033.238948] wlan0: associated
>[17033.239086] cfg80211: Calling CRDA for country: US
>[17033.245226] ath: regdomain 0x8348 updated by CountryIE
>[17033.245230] ath: EEPROM regdomain: 0x8348
>[17033.245231] ath: EEPROM indicates we should expect a country code
>[17033.245234] ath: doing EEPROM country->regdmn map search
>[17033.245236] ath: country maps to regdmn code: 0x3a
>[17033.245237] ath: Country alpha2 being used: US
>[17033.245239] ath: Regpair used: 0x3a
>[17033.245241] cfg80211: Regulatory domain changed to country: US
>[17033.245242] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17033.245245] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17033.245248] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17033.245250] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.245252] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.245255] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17033.245257] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17070.279223] wlan0: authenticate with 00:26:cb:4e:85:4f
>[17070.283516] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[17070.284084] wlan0: authenticated
>[17070.289091] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[17070.294056] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[17070.296071] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[17070.296600] wlan0: associated
>[17194.906104] usb 1-3: new high-speed USB device number 3 using ehci_hcd
>[17195.021316] usb 1-3: New USB device found, idVendor=0781, idProduct=5408
>[17195.021327] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[17195.021335] usb 1-3: Product: U3 Titanium
>[17195.021341] usb 1-3: Manufacturer: SanDisk Corporation
>[17195.021347] usb 1-3: SerialNumber: 0000060513067241
>[17195.283688] Initializing USB Mass Storage driver...
>[17195.283858] scsi2 : usb-storage 1-3:1.0
>[17195.283966] usbcore: registered new interface driver usb-storage
>[17195.283968] USB Mass Storage support registered.
>[17196.284781] scsi 2:0:0:0: Direct-Access     SanDisk  U3 Titanium      2.18 PQ: 0 ANSI: 2
>[17196.286867] sd 2:0:0:0: [sdb] 4013713 512-byte logical blocks: (2.05 GB/1.91 GiB)
>[17196.287366] sd 2:0:0:0: [sdb] Write Protect is off
>[17196.287375] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
>[17196.287858] sd 2:0:0:0: [sdb] No Caching mode page present
>[17196.287867] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>[17196.289667] sd 2:0:0:0: Attached scsi generic sg1 type 0
>[17196.293738] sd 2:0:0:0: [sdb] No Caching mode page present
>[17196.293748] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>[17196.299672]  sdb: sdb1
>[17196.303491] sd 2:0:0:0: [sdb] No Caching mode page present
>[17196.303502] sd 2:0:0:0: [sdb] Assuming drive cache: write through
>[17196.303512] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[17197.798271] SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
>[17222.002992] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[17322.945903] sdb: detected capacity change from 2055021056 to 0
>[17333.435409] usb 1-3: USB disconnect, device number 3
>[17422.030260] wlan0: authenticate with 00:26:cb:4e:82:6f
>[17422.035085] wlan0: direct probe to 00:26:cb:4e:82:6f (try 1/3)
>[17422.236042] wlan0: direct probe to 00:26:cb:4e:82:6f (try 2/3)
>[17422.437037] wlan0: direct probe to 00:26:cb:4e:82:6f (try 3/3)
>[17422.638055] wlan0: authentication with 00:26:cb:4e:82:6f timed out
>[17422.936852] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[17422.942210] cfg80211: Calling CRDA to update world regulatory domain
>[17422.943538] wlan0: authenticate with 00:26:cb:4e:85:4f
>[17422.947969] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[17422.948615] wlan0: authenticated
>[17422.951126] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[17422.958317] cfg80211: World regulatory domain updated:
>[17422.958322] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17422.958325] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.958328] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17422.958330] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[17422.958332] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.958335] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.958655] cfg80211: Calling CRDA for country: US
>[17422.959718] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[17422.961345] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[17422.961685] wlan0: associated
>[17422.963361] cfg80211: Regulatory domain changed to country: US
>[17422.963364] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17422.963367] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17422.963370] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17422.963373] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.963375] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.963378] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.963380] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17422.963400] cfg80211: Calling CRDA for country: US
>[17422.966260] ath: regdomain 0x8348 updated by CountryIE
>[17422.966263] ath: EEPROM regdomain: 0x8348
>[17422.966265] ath: EEPROM indicates we should expect a country code
>[17422.966267] ath: doing EEPROM country->regdmn map search
>[17422.966269] ath: country maps to regdmn code: 0x3a
>[17422.966271] ath: Country alpha2 being used: US
>[17422.966272] ath: Regpair used: 0x3a
>[17422.966274] cfg80211: Regulatory domain changed to country: US
>[17422.966276] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[17422.966278] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[17422.966281] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[17422.966283] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.966286] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.966288] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[17422.966290] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[17462.001955] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[17655.750505] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[18182.005252] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[18302.005792] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[18542.006493] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[18662.002571] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[19382.004152] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[19502.006703] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[21302.001561] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[22382.006293] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[22862.006603] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[22982.006568] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[24542.003186] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[26295.309186] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[26659.202411] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[27782.004993] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[28022.005316] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[28293.455385] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[28293.472208] cfg80211: Calling CRDA to update world regulatory domain
>[28293.480372] cfg80211: World regulatory domain updated:
>[28293.480377] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28293.480380] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.480382] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28293.480385] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28293.480387] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.480390] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.480409] cfg80211: Calling CRDA for country: US
>[28293.483494] cfg80211: Regulatory domain changed to country: US
>[28293.483498] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28293.483501] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28293.483504] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28293.483507] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.483509] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.483511] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28293.483514] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28294.748396] PM: Syncing filesystems ... done.
>[28295.003342] PM: Preparing system for mem sleep
>[28295.107394] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[28295.118123] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[28295.129097] PM: Entering mem sleep
>[28295.129146] Suspending console(s) (use no_console_suspend to debug)
>[28295.129535] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[28295.129942] sd 0:0:0:0: [sda] Stopping disk
>[28295.144675] serial 00:0a: disabled
>[28295.145328] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[28295.145343] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[28295.146081] ACPI handle has no context!
>[28295.148043] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[28295.159131] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[28295.724153] PM: suspend of devices complete after 594.737 msecs
>[28295.724299] PM: late suspend of devices complete after 0.141 msecs
>[28295.735267] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[28295.746036] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[28295.746130] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[28295.756032] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[28295.756037] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[28295.756338] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[28295.767039] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[28295.767133] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[28295.767137] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[28295.767221] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[28295.767273] PM: noirq suspend of devices complete after 42.969 msecs
>[28295.767739] ACPI: Preparing to enter system sleep state S3
>[28295.810059] PM: Saving platform NVS memory
>[28295.811125] Disabling non-boot CPUs ...
>[28295.812509] smpboot: CPU 1 is now offline
>[28295.813695] Extended CMOS year: 2000
>[28295.813695] ACPI: Low-level resume complete
>[28295.813695] PM: Restoring platform NVS memory
>[28295.813695] Extended CMOS year: 2000
>[28295.813695] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[28295.830514] Enabling non-boot CPUs ...
>[28295.830764] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[28295.848011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[28295.855031] CPU1 is up
>[28295.857380] ACPI: Waking up from system sleep state S3
>[28296.050231] i915 0000:00:02.0: power state changed by ACPI to D0
>[28296.072308] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[28296.072314] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[28296.072391] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[28296.072395] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[28296.083228] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[28296.094518] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[28296.104153] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[28296.104233] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[28296.104238] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[28296.115238] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[28296.159439] PM: noirq resume of devices complete after 109.276 msecs
>[28296.159557] PM: early resume of devices complete after 0.070 msecs
>[28296.159603] i915 0000:00:02.0: setting latency timer to 64
>[28296.159689] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[28296.161189] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[28296.171866] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[28296.171895] usb usb3: root hub lost power or was reset
>[28296.171914] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[28296.171941] usb usb4: root hub lost power or was reset
>[28296.171961] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[28296.172051] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[28296.172113] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[28296.172124] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[28296.172136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[28296.172163] usb usb5: root hub lost power or was reset
>[28296.172180] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[28296.172207] usb usb6: root hub lost power or was reset
>[28296.172226] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[28296.172251] pci 0000:00:1e.0: setting latency timer to 64
>[28296.172266] ata_piix 0000:00:1f.2: setting latency timer to 64
>[28296.172302] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28296.173322] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28296.221296] serial 00:0a: activated
>[28296.489073] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[28296.726085] firewire_core 0000:05:00.1: rediscovered device fw0
>[28299.252158] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[28299.252162] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[28299.252165] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[28299.252169] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[28299.252172] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[28299.293230] ata1.00: configured for UDMA/100
>[28299.293290] sd 0:0:0:0: [sda] Starting disk
>[28299.296198] Extended CMOS year: 2000
>[28299.440183] PM: resume of devices complete after 3280.621 msecs
>[28299.440357] PM: Finishing wakeup.
>[28299.440359] Restarting tasks ... done.
>[28299.468929] video LNXVIDEO:00: Restoring backlight state
>[28299.528353] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28299.587013] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28299.648026] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28299.709026] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[28300.048810] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[28300.149132] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[28300.149267] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[28300.162811] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[28308.494610] wlan0: authenticate with 00:26:cb:4e:85:4f
>[28308.503780] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[28308.504299] wlan0: authenticated
>[28308.504514] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[28308.510023] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[28308.576887] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[28308.577168] wlan0: associated
>[28308.577232] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[28308.577371] cfg80211: Calling CRDA for country: US
>[28308.592600] ath: regdomain 0x8348 updated by CountryIE
>[28308.592608] ath: EEPROM regdomain: 0x8348
>[28308.592611] ath: EEPROM indicates we should expect a country code
>[28308.592616] ath: doing EEPROM country->regdmn map search
>[28308.592621] ath: country maps to regdmn code: 0x3a
>[28308.592625] ath: Country alpha2 being used: US
>[28308.592628] ath: Regpair used: 0x3a
>[28308.592633] cfg80211: Regulatory domain changed to country: US
>[28308.592636] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28308.592642] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28308.592648] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28308.592654] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28308.592659] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28308.592664] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28308.592669] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28339.583247] wlan0: authenticate with 00:26:cb:4e:85:40
>[28339.587848] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[28339.788041] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[28339.989067] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[28340.190090] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[28340.680938] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[28340.691174] cfg80211: Calling CRDA to update world regulatory domain
>[28340.694566] wlan0: authenticate with 00:26:cb:4e:85:4f
>[28340.700609] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[28340.701410] wlan0: authenticated
>[28340.701728] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[28340.707835] cfg80211: World regulatory domain updated:
>[28340.707840] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28340.707843] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.707846] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28340.707848] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28340.707851] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.707853] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.707868] cfg80211: Calling CRDA for country: US
>[28340.708026] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[28340.709613] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[28340.709935] wlan0: associated
>[28340.711350] cfg80211: Regulatory domain changed to country: US
>[28340.711353] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28340.711356] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28340.711358] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28340.711361] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.711363] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.711366] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.711368] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28340.711384] cfg80211: Calling CRDA for country: US
>[28340.714038] ath: regdomain 0x8348 updated by CountryIE
>[28340.714041] ath: EEPROM regdomain: 0x8348
>[28340.714043] ath: EEPROM indicates we should expect a country code
>[28340.714045] ath: doing EEPROM country->regdmn map search
>[28340.714047] ath: country maps to regdmn code: 0x3a
>[28340.714049] ath: Country alpha2 being used: US
>[28340.714051] ath: Regpair used: 0x3a
>[28340.714053] cfg80211: Regulatory domain changed to country: US
>[28340.714054] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28340.714057] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28340.714059] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28340.714062] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.714064] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.714066] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28340.714069] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28396.833026] Adjusting hpet more than 11% (2603575740 vs 2601267907)
>[28432.007370] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[28515.006456] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[28701.557273] wlan0: authenticate with 00:26:cb:4e:82:60
>[28701.562468] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[28701.763055] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[28701.964044] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[28702.165053] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[28702.656192] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[28702.656272] cfg80211: Calling CRDA to update world regulatory domain
>[28702.659587] wlan0: authenticate with 00:26:cb:4e:85:4f
>[28702.671529] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[28702.671823] cfg80211: World regulatory domain updated:
>[28702.671826] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28702.671829] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.671831] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28702.671834] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[28702.671836] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.671839] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.671855] cfg80211: Calling CRDA for country: US
>[28702.672194] wlan0: authenticated
>[28702.673687] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[28702.679405] cfg80211: Regulatory domain changed to country: US
>[28702.679408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28702.679411] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28702.679414] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28702.679416] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.679419] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.679421] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.679423] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28702.680025] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[28702.681843] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[28702.682207] wlan0: associated
>[28702.682369] cfg80211: Calling CRDA for country: US
>[28702.686365] ath: regdomain 0x8348 updated by CountryIE
>[28702.686369] ath: EEPROM regdomain: 0x8348
>[28702.686371] ath: EEPROM indicates we should expect a country code
>[28702.686373] ath: doing EEPROM country->regdmn map search
>[28702.686375] ath: country maps to regdmn code: 0x3a
>[28702.686377] ath: Country alpha2 being used: US
>[28702.686378] ath: Regpair used: 0x3a
>[28702.686380] cfg80211: Regulatory domain changed to country: US
>[28702.686382] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[28702.686384] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[28702.686387] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[28702.686389] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.686392] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.686394] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[28702.686396] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[28731.760080] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[28778.756092] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[30082.076797] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[31138.004789] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[31258.003904] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[31378.003380] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[31410.811734] systemd-journald[388]: Allocation limit reached, rotating.
>[31410.811749] systemd-journald[388]: Rotating...
>[31410.812424] systemd-journald[388]: Vacuuming...
>[31410.812529] systemd-journald[388]: Retrying write.
>[31498.004763] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[31589.769057] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[31623.279111] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[31821.982762] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[31822.004167] cfg80211: Calling CRDA to update world regulatory domain
>[31822.041198] cfg80211: World regulatory domain updated:
>[31822.041203] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[31822.041206] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.041208] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[31822.041211] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[31822.041213] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.041215] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.041235] cfg80211: Calling CRDA for country: US
>[31822.045167] cfg80211: Regulatory domain changed to country: US
>[31822.045171] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[31822.045174] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[31822.045176] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[31822.045179] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.045181] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.045183] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31822.045186] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[31823.318570] PM: Syncing filesystems ... done.
>[31823.381258] PM: Preparing system for mem sleep
>[31823.482977] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[31823.494185] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[31823.505114] PM: Entering mem sleep
>[31823.505169] Suspending console(s) (use no_console_suspend to debug)
>[31823.505541] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[31823.505806] sd 0:0:0:0: [sda] Stopping disk
>[31823.521312] serial 00:0a: disabled
>[31823.522120] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[31823.522152] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[31823.523131] ACPI handle has no context!
>[31823.525406] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[31823.534128] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[31824.101161] PM: suspend of devices complete after 595.749 msecs
>[31824.101306] PM: late suspend of devices complete after 0.142 msecs
>[31824.112258] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[31824.123036] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[31824.123128] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[31824.133035] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[31824.133040] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[31824.133345] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[31824.144036] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[31824.144129] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[31824.144133] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[31824.144212] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[31824.144264] PM: noirq suspend of devices complete after 42.956 msecs
>[31824.144734] ACPI: Preparing to enter system sleep state S3
>[31824.187059] PM: Saving platform NVS memory
>[31824.187654] Disabling non-boot CPUs ...
>[31824.189084] smpboot: CPU 1 is now offline
>[31824.189826] Extended CMOS year: 2000
>[31824.189826] ACPI: Low-level resume complete
>[31824.189826] PM: Restoring platform NVS memory
>[31824.189826] Extended CMOS year: 2000
>[31824.189826] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[31824.206651] Enabling non-boot CPUs ...
>[31824.206854] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[31824.224011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[31824.231028] CPU1 is up
>[31824.233381] ACPI: Waking up from system sleep state S3
>[31824.416235] i915 0000:00:02.0: power state changed by ACPI to D0
>[31824.438326] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[31824.438331] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[31824.438401] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[31824.438406] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[31824.449236] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[31824.460511] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[31824.470151] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[31824.470233] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[31824.470237] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[31824.481235] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[31824.525438] PM: noirq resume of devices complete after 109.273 msecs
>[31824.525557] PM: early resume of devices complete after 0.071 msecs
>[31824.525603] i915 0000:00:02.0: setting latency timer to 64
>[31824.525687] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[31824.527080] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[31824.537713] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[31824.537742] usb usb3: root hub lost power or was reset
>[31824.537761] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[31824.537789] usb usb4: root hub lost power or was reset
>[31824.537808] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[31824.537888] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[31824.537948] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[31824.537960] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[31824.537971] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[31824.537999] usb usb5: root hub lost power or was reset
>[31824.538028] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[31824.538054] usb usb6: root hub lost power or was reset
>[31824.538072] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[31824.538098] pci 0000:00:1e.0: setting latency timer to 64
>[31824.538113] ata_piix 0000:00:1f.2: setting latency timer to 64
>[31824.538148] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31824.539167] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31824.598935] serial 00:0a: activated
>[31824.854062] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[31825.092080] firewire_core 0000:05:00.1: rediscovered device fw0
>[31827.771092] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[31827.771096] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[31827.771099] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[31827.771103] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[31827.771106] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[31827.812228] ata1.00: configured for UDMA/100
>[31827.812286] sd 0:0:0:0: [sda] Starting disk
>[31827.815155] Extended CMOS year: 2000
>[31827.955230] PM: resume of devices complete after 3429.668 msecs
>[31827.955405] PM: Finishing wakeup.
>[31827.955407] Restarting tasks ... done.
>[31827.987695] video LNXVIDEO:00: Restoring backlight state
>[31828.045071] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31828.105012] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31828.163754] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31828.223476] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[31828.633898] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[31828.734188] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[31828.734382] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[31828.754930] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[31837.007113] wlan0: authenticate with 00:26:cb:4e:82:60
>[31837.016538] wlan0: send auth to 00:26:cb:4e:82:60 (try 1/3)
>[31837.019958] wlan0: authenticated
>[31837.020138] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[31837.029029] wlan0: associate with 00:26:cb:4e:82:60 (try 1/3)
>[31837.230034] wlan0: associate with 00:26:cb:4e:82:60 (try 2/3)
>[31837.324053] wlan0: RX AssocResp from 00:26:cb:4e:82:60 (capab=0x431 status=0 aid=24)
>[31837.324341] wlan0: associated
>[31837.324378] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[31837.324443] cfg80211: Calling CRDA for country: US
>[31837.330815] ath: regdomain 0x8348 updated by CountryIE
>[31837.330819] ath: EEPROM regdomain: 0x8348
>[31837.330820] ath: EEPROM indicates we should expect a country code
>[31837.330823] ath: doing EEPROM country->regdmn map search
>[31837.330825] ath: country maps to regdmn code: 0x3a
>[31837.330827] ath: Country alpha2 being used: US
>[31837.330828] ath: Regpair used: 0x3a
>[31837.330830] cfg80211: Regulatory domain changed to country: US
>[31837.330832] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[31837.330834] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[31837.330837] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[31837.330839] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31837.330842] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31837.330844] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[31837.330846] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32034.968534] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[32141.706106] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
>[32150.276773] gpk-dbus-servic[13404]: segfault at 80 ip 0000003bd4e2bb52 sp 00007ffffa3d4b28 error 4 in libgdk-3.so.0.400.4[3bd4e00000+78000]
>[32151.024348] gpk-dbus-servic[13412]: segfault at 80 ip 0000003bd4e2bb52 sp 00007fff4bfe9c38 error 4 in libgdk-3.so.0.400.4[3bd4e00000+78000]
>[32217.363271] wlan0: authenticate with 00:26:cb:4e:85:4f
>[32217.368887] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[32217.369448] wlan0: authenticated
>[32217.370988] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[32217.379028] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[32217.381560] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[32217.381903] wlan0: associated
>[32531.320658] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[32531.338216] cfg80211: Calling CRDA to update world regulatory domain
>[32531.400585] cfg80211: World regulatory domain updated:
>[32531.400591] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32531.400594] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.400597] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32531.400599] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32531.400602] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.400604] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.400628] cfg80211: Calling CRDA for country: US
>[32531.404372] cfg80211: Regulatory domain changed to country: US
>[32531.404376] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32531.404379] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32531.404381] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32531.404384] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.404386] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.404388] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32531.404391] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32532.396964] PM: Syncing filesystems ... done.
>[32532.608695] PM: Preparing system for mem sleep
>[32532.698092] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[32532.710220] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[32532.721140] PM: Entering mem sleep
>[32532.721199] Suspending console(s) (use no_console_suspend to debug)
>[32532.721593] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32532.721823] sd 0:0:0:0: [sda] Stopping disk
>[32532.738091] serial 00:0a: disabled
>[32532.738672] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[32532.738705] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[32532.740071] ACPI handle has no context!
>[32532.741947] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[32532.750149] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[32533.316172] PM: suspend of devices complete after 594.715 msecs
>[32533.316312] PM: late suspend of devices complete after 0.137 msecs
>[32533.327269] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[32533.338033] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[32533.338123] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[32533.348036] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[32533.348041] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[32533.348359] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[32533.359036] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[32533.359132] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[32533.359136] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[32533.359215] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[32533.359267] PM: noirq suspend of devices complete after 42.951 msecs
>[32533.359741] ACPI: Preparing to enter system sleep state S3
>[32533.402058] PM: Saving platform NVS memory
>[32533.402574] Disabling non-boot CPUs ...
>[32533.404023] smpboot: CPU 1 is now offline
>[32533.404712] Extended CMOS year: 2000
>[32533.404712] ACPI: Low-level resume complete
>[32533.404712] PM: Restoring platform NVS memory
>[32533.404712] Extended CMOS year: 2000
>[32533.404712] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[32533.421543] Enabling non-boot CPUs ...
>[32533.421742] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32533.439014] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[32533.446029] CPU1 is up
>[32533.448394] ACPI: Waking up from system sleep state S3
>[32533.632223] i915 0000:00:02.0: power state changed by ACPI to D0
>[32533.654450] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[32533.654456] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[32533.654522] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[32533.654526] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[32533.665210] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[32533.676500] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[32533.686129] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[32533.686218] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[32533.686223] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[32533.697208] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[32533.741432] PM: noirq resume of devices complete after 109.279 msecs
>[32533.741553] PM: early resume of devices complete after 0.072 msecs
>[32533.741598] i915 0000:00:02.0: setting latency timer to 64
>[32533.741690] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[32533.743432] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32533.754068] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[32533.754097] usb usb3: root hub lost power or was reset
>[32533.754120] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[32533.754155] usb usb4: root hub lost power or was reset
>[32533.754174] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[32533.754251] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[32533.754315] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[32533.754326] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[32533.754338] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[32533.754365] usb usb5: root hub lost power or was reset
>[32533.754382] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[32533.754408] usb usb6: root hub lost power or was reset
>[32533.754426] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[32533.754451] pci 0000:00:1e.0: setting latency timer to 64
>[32533.754467] ata_piix 0000:00:1f.2: setting latency timer to 64
>[32533.754501] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32533.755521] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32533.797894] serial 00:0a: activated
>[32534.070073] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[32534.308076] firewire_core 0000:05:00.1: rediscovered device fw0
>[32536.918506] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32536.918510] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32536.918514] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[32536.918517] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[32536.918521] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[32536.959235] ata1.00: configured for UDMA/100
>[32536.959273] sd 0:0:0:0: [sda] Starting disk
>[32537.099152] PM: resume of devices complete after 3357.595 msecs
>[32537.099337] PM: Finishing wakeup.
>[32537.099339] Restarting tasks ... done.
>[32537.130090] video LNXVIDEO:00: Restoring backlight state
>[32537.190031] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32537.250026] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32537.307775] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32537.365077] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32537.695230] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32537.796135] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32537.796269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[32537.809255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[32546.204848] wlan0: authenticate with 00:26:cb:4e:85:4f
>[32546.210398] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[32546.211256] wlan0: authenticated
>[32546.211873] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[32546.220147] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[32546.421052] wlan0: associate with 00:26:cb:4e:85:4f (try 2/3)
>[32546.622027] wlan0: associate with 00:26:cb:4e:85:4f (try 3/3)
>[32546.655679] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=2)
>[32546.656065] wlan0: associated
>[32546.656153] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[32546.656289] cfg80211: Calling CRDA for country: US
>[32546.666569] ath: regdomain 0x8348 updated by CountryIE
>[32546.666577] ath: EEPROM regdomain: 0x8348
>[32546.666581] ath: EEPROM indicates we should expect a country code
>[32546.666587] ath: doing EEPROM country->regdmn map search
>[32546.666591] ath: country maps to regdmn code: 0x3a
>[32546.666595] ath: Country alpha2 being used: US
>[32546.666599] ath: Regpair used: 0x3a
>[32546.666603] cfg80211: Regulatory domain changed to country: US
>[32546.666606] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32546.666612] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32546.666618] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32546.666624] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32546.666629] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32546.666634] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32546.666639] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32856.645087] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[32856.664159] cfg80211: Calling CRDA to update world regulatory domain
>[32856.677574] cfg80211: World regulatory domain updated:
>[32856.677579] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32856.677582] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.677585] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32856.677587] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[32856.677590] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.677592] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.677612] cfg80211: Calling CRDA for country: US
>[32856.683718] cfg80211: Regulatory domain changed to country: US
>[32856.683723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32856.683726] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32856.683728] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32856.683731] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.683733] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.683736] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32856.683738] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[32858.113456] PM: Syncing filesystems ... done.
>[32858.220591] PM: Preparing system for mem sleep
>[32858.323071] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[32858.335201] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[32858.346124] PM: Entering mem sleep
>[32858.346162] Suspending console(s) (use no_console_suspend to debug)
>[32858.346611] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[32858.347294] sd 0:0:0:0: [sda] Stopping disk
>[32858.362729] serial 00:0a: disabled
>[32858.363230] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[32858.363261] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[32858.366571] ACPI handle has no context!
>[32858.366585] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[32858.375117] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[32858.942161] PM: suspend of devices complete after 595.741 msecs
>[32858.942306] PM: late suspend of devices complete after 0.142 msecs
>[32858.953273] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[32858.964036] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[32858.964129] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[32858.974033] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[32858.974038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[32858.974332] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[32858.985036] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[32858.985132] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[32858.985136] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[32858.985220] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[32858.985272] PM: noirq suspend of devices complete after 42.962 msecs
>[32858.985751] ACPI: Preparing to enter system sleep state S3
>[32859.028058] PM: Saving platform NVS memory
>[32859.029101] Disabling non-boot CPUs ...
>[32859.030538] smpboot: CPU 1 is now offline
>[32859.031259] Extended CMOS year: 2000
>[32859.031259] ACPI: Low-level resume complete
>[32859.031259] PM: Restoring platform NVS memory
>[32859.031259] Extended CMOS year: 2000
>[32859.031259] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[32859.048089] Enabling non-boot CPUs ...
>[32859.048286] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[32859.065011] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[32859.072034] CPU1 is up
>[32859.074384] ACPI: Waking up from system sleep state S3
>[32859.267235] i915 0000:00:02.0: power state changed by ACPI to D0
>[32859.289312] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[32859.289318] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[32859.289391] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[32859.289395] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[32859.300226] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[32859.311516] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[32859.321156] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[32859.321234] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[32859.321239] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[32859.332236] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[32859.376437] PM: noirq resume of devices complete after 109.270 msecs
>[32859.376557] PM: early resume of devices complete after 0.071 msecs
>[32859.376603] i915 0000:00:02.0: setting latency timer to 64
>[32859.376691] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[32859.378166] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32859.388893] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[32859.388923] usb usb3: root hub lost power or was reset
>[32859.388942] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[32859.388969] usb usb4: root hub lost power or was reset
>[32859.388988] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[32859.389078] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[32859.389147] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[32859.389158] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[32859.389170] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[32859.389197] usb usb5: root hub lost power or was reset
>[32859.389214] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[32859.389241] usb usb6: root hub lost power or was reset
>[32859.389259] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[32859.389285] pci 0000:00:1e.0: setting latency timer to 64
>[32859.389300] ata_piix 0000:00:1f.2: setting latency timer to 64
>[32859.389335] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32859.390354] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32859.485207] serial 00:0a: activated
>[32859.705077] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[32859.968074] firewire_core 0000:05:00.1: rediscovered device fw0
>[32862.556232] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[32862.556237] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[32862.556240] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[32862.556244] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[32862.556247] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[32862.597230] ata1.00: configured for UDMA/100
>[32862.597288] sd 0:0:0:0: [sda] Starting disk
>[32862.600839] Extended CMOS year: 2000
>[32862.735201] PM: resume of devices complete after 3358.640 msecs
>[32862.735379] PM: Finishing wakeup.
>[32862.735381] Restarting tasks ... done.
>[32862.774339] video LNXVIDEO:00: Restoring backlight state
>[32862.833290] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32862.891837] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32862.949500] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32863.019029] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[32863.333306] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32863.434128] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[32863.434344] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[32863.449350] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[32871.860402] wlan0: authenticate with 00:26:cb:4e:85:40
>[32871.868126] wlan0: send auth to 00:26:cb:4e:85:40 (try 1/3)
>[32871.879412] wlan0: authenticated
>[32871.879644] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[32871.886121] wlan0: associate with 00:26:cb:4e:85:40 (try 1/3)
>[32872.087040] wlan0: associate with 00:26:cb:4e:85:40 (try 2/3)
>[32872.113624] wlan0: RX AssocResp from 00:26:cb:4e:85:40 (capab=0x431 status=0 aid=72)
>[32872.114126] wlan0: associated
>[32872.114206] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[32872.114342] cfg80211: Calling CRDA for country: US
>[32872.125979] ath: regdomain 0x8348 updated by CountryIE
>[32872.125983] ath: EEPROM regdomain: 0x8348
>[32872.125985] ath: EEPROM indicates we should expect a country code
>[32872.125987] ath: doing EEPROM country->regdmn map search
>[32872.125989] ath: country maps to regdmn code: 0x3a
>[32872.125991] ath: Country alpha2 being used: US
>[32872.125992] ath: Regpair used: 0x3a
>[32872.125994] cfg80211: Regulatory domain changed to country: US
>[32872.125996] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[32872.125999] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[32872.126021] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[32872.126024] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32872.126026] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32872.126028] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[32872.126030] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[33095.676230] wlan0: authenticate with 00:26:cb:4e:82:60
>[33095.793285] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[33095.994060] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[33096.195061] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[33096.396027] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[33096.886847] wlan0: deauthenticating from 00:26:cb:4e:85:40 by local choice (reason=2)
>[33096.888086] wlan0: authenticate with 00:26:cb:4e:85:40
>[33096.892657] wlan0: send auth to 00:26:cb:4e:85:40 (try 1/3)
>[33096.892758] cfg80211: Calling CRDA to update world regulatory domain
>[33096.907403] cfg80211: World regulatory domain updated:
>[33096.907408] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33096.907411] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.907414] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33096.907417] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33096.907419] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.907421] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.907439] cfg80211: Calling CRDA for country: US
>[33096.910871] cfg80211: Regulatory domain changed to country: US
>[33096.910875] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33096.910878] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[33096.910881] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[33096.910883] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.910885] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.910888] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33096.910890] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[33097.575222] wlan0: send auth to 00:26:cb:4e:85:40 (try 2/3)
>[33097.620920] wlan0: authenticated
>[33098.007201] wlan0: authenticate with 00:26:cb:4e:86:b0
>[33098.012164] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[33098.213059] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[33098.414059] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[33098.615056] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[33098.979075] wlan0: authenticate with 00:26:cb:4e:82:6f
>[33098.987411] wlan0: send auth to 00:26:cb:4e:82:6f (try 1/3)
>[33098.988019] wlan0: authenticated
>[33098.989052] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[33098.994041] wlan0: associate with 00:26:cb:4e:82:6f (try 1/3)
>[33098.996081] wlan0: RX AssocResp from 00:26:cb:4e:82:6f (capab=0x11 status=0 aid=7)
>[33098.996722] wlan0: associated
>[33098.996840] cfg80211: Calling CRDA for country: US
>[33099.002395] ath: regdomain 0x8348 updated by CountryIE
>[33099.002403] ath: EEPROM regdomain: 0x8348
>[33099.002406] ath: EEPROM indicates we should expect a country code
>[33099.002411] ath: doing EEPROM country->regdmn map search
>[33099.002416] ath: country maps to regdmn code: 0x3a
>[33099.002420] ath: Country alpha2 being used: US
>[33099.002423] ath: Regpair used: 0x3a
>[33099.002427] cfg80211: Regulatory domain changed to country: US
>[33099.002430] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33099.002436] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[33099.002442] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[33099.002448] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33099.002453] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33099.002458] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33099.002464] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[33265.259146] cfg80211: Calling CRDA to update world regulatory domain
>[33265.263222] cfg80211: World regulatory domain updated:
>[33265.263226] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33265.263229] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.263231] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33265.263234] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[33265.263236] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.263239] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.263260] cfg80211: Calling CRDA for country: US
>[33265.265780] cfg80211: Regulatory domain changed to country: US
>[33265.265784] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33265.265787] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[33265.265789] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[33265.265792] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.265794] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.265796] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33265.265799] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[33265.807981] wlan0: authenticate with 00:26:cb:4e:86:bf
>[33265.817490] wlan0: direct probe to 00:26:cb:4e:86:bf (try 1/3)
>[33266.018058] wlan0: direct probe to 00:26:cb:4e:86:bf (try 2/3)
>[33266.219034] wlan0: direct probe to 00:26:cb:4e:86:bf (try 3/3)
>[33266.420058] wlan0: authentication with 00:26:cb:4e:86:bf timed out
>[33266.720573] wlan0: authenticate with 00:26:cb:4e:7b:b0
>[33266.729004] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 1/3)
>[33266.930056] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 2/3)
>[33267.131056] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 3/3)
>[33267.332053] wlan0: authentication with 00:26:cb:4e:7b:b0 timed out
>[33267.568350] wlan0: authenticate with 00:26:cb:4e:85:80
>[33267.575280] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[33267.776064] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[33267.977042] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[33268.178039] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[33268.349913] wlan0: authenticate with 00:26:cb:4e:82:50
>[33268.357564] wlan0: direct probe to 00:26:cb:4e:82:50 (try 1/3)
>[33268.558059] wlan0: direct probe to 00:26:cb:4e:82:50 (try 2/3)
>[33268.759034] wlan0: direct probe to 00:26:cb:4e:82:50 (try 3/3)
>[33268.960054] wlan0: authentication with 00:26:cb:4e:82:50 timed out
>[33273.139992] wlan0: authenticate with 00:26:cb:4e:85:4f
>[33273.148395] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[33273.148918] wlan0: authenticated
>[33273.149125] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[33273.155024] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[33273.156138] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x1 status=17 aid=0)
>[33273.156142] wlan0: 00:26:cb:4e:85:4f denied association (code=17)
>[33273.160238] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[33273.583788] wlan0: authenticate with 00:26:cb:4e:85:40
>[33273.590430] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[33273.791068] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[33273.992054] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[33274.193063] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[33274.556916] wlan0: authenticate with 00:26:cb:4e:82:60
>[33274.565721] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[33274.766055] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[33274.967056] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[33275.168025] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[33275.532209] wlan0: authenticate with 00:26:cb:4e:82:6f
>[33275.537472] wlan0: send auth to 00:26:cb:4e:82:6f (try 1/3)
>[33275.538106] wlan0: authenticated
>[33275.538287] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[33275.543024] wlan0: associate with 00:26:cb:4e:82:6f (try 1/3)
>[33275.744061] wlan0: associate with 00:26:cb:4e:82:6f (try 2/3)
>[33275.945027] wlan0: associate with 00:26:cb:4e:82:6f (try 3/3)
>[33276.146054] wlan0: association with 00:26:cb:4e:82:6f timed out
>[33276.446276] wlan0: authenticate with 00:26:cb:4e:86:b0
>[33276.455537] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[33276.656029] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[33276.857057] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[33277.058053] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[33277.357881] wlan0: authenticate with 00:26:cb:4e:86:bf
>[33277.362578] wlan0: direct probe to 00:26:cb:4e:86:bf (try 1/3)
>[33277.563034] wlan0: direct probe to 00:26:cb:4e:86:bf (try 2/3)
>[33277.764047] wlan0: direct probe to 00:26:cb:4e:86:bf (try 3/3)
>[33277.965046] wlan0: authentication with 00:26:cb:4e:86:bf timed out
>[33278.202128] wlan0: authenticate with 00:26:cb:4e:7b:b0
>[33278.211608] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 1/3)
>[33278.412038] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 2/3)
>[33278.613060] wlan0: direct probe to 00:26:cb:4e:7b:b0 (try 3/3)
>[33278.814044] wlan0: authentication with 00:26:cb:4e:7b:b0 timed out
>[33278.985037] wlan0: authenticate with 00:26:cb:4e:85:80
>[33278.992632] wlan0: direct probe to 00:26:cb:4e:85:80 (try 1/3)
>[33279.193033] wlan0: direct probe to 00:26:cb:4e:85:80 (try 2/3)
>[33279.394054] wlan0: direct probe to 00:26:cb:4e:85:80 (try 3/3)
>[33279.595042] wlan0: authentication with 00:26:cb:4e:85:80 timed out
>[33288.084143] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[33296.228811] wlan0: authenticate with 00:26:cb:4e:85:4f
>[33296.239051] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[33296.239601] wlan0: authenticated
>[33296.239920] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[33296.246025] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[33296.278713] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[33296.278926] wlan0: associated
>[33296.278967] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[33296.279065] cfg80211: Calling CRDA for country: US
>[33296.284833] ath: regdomain 0x8348 updated by CountryIE
>[33296.284838] ath: EEPROM regdomain: 0x8348
>[33296.284839] ath: EEPROM indicates we should expect a country code
>[33296.284842] ath: doing EEPROM country->regdmn map search
>[33296.284844] ath: country maps to regdmn code: 0x3a
>[33296.284845] ath: Country alpha2 being used: US
>[33296.284847] ath: Regpair used: 0x3a
>[33296.284849] cfg80211: Regulatory domain changed to country: US
>[33296.284850] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[33296.284853] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[33296.284856] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[33296.284858] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33296.284860] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33296.284863] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[33296.284865] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[34091.213120] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[34692.819177] wlan0: authenticate with 00:26:cb:4e:85:40
>[34692.824251] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[34693.025043] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[34693.226040] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[34693.427043] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[34693.857830] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[34693.859723] wlan0: authenticate with 00:26:cb:4e:85:4f
>[34693.864592] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[34693.864754] cfg80211: Calling CRDA to update world regulatory domain
>[34693.872968] wlan0: authenticated
>[34693.873435] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[34693.878025] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[34693.879514] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[34693.879855] wlan0: associated
>[34694.107427] cfg80211: World regulatory domain updated:
>[34694.107432] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34694.107435] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.107438] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34694.107440] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34694.107442] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.107445] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.107462] cfg80211: Calling CRDA for country: US
>[34694.110257] cfg80211: Regulatory domain changed to country: US
>[34694.110261] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34694.110264] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[34694.110267] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[34694.110269] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.110271] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.110274] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.110276] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[34694.110296] cfg80211: Calling CRDA for country: US
>[34694.112634] ath: regdomain 0x8348 updated by CountryIE
>[34694.112637] ath: EEPROM regdomain: 0x8348
>[34694.112639] ath: EEPROM indicates we should expect a country code
>[34694.112641] ath: doing EEPROM country->regdmn map search
>[34694.112643] ath: country maps to regdmn code: 0x3a
>[34694.112645] ath: Country alpha2 being used: US
>[34694.112646] ath: Regpair used: 0x3a
>[34694.112648] cfg80211: Regulatory domain changed to country: US
>[34694.112650] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34694.112652] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[34694.112655] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[34694.112657] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.112660] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.112662] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34694.112664] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[34835.095187] wlan0: authenticate with 00:26:cb:4e:82:60
>[34835.099924] wlan0: direct probe to 00:26:cb:4e:82:60 (try 1/3)
>[34835.300033] wlan0: direct probe to 00:26:cb:4e:82:60 (try 2/3)
>[34835.501055] wlan0: direct probe to 00:26:cb:4e:82:60 (try 3/3)
>[34835.702044] wlan0: authentication with 00:26:cb:4e:82:60 timed out
>[34836.196836] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[34836.203069] cfg80211: Calling CRDA to update world regulatory domain
>[34836.203311] wlan0: authenticate with 00:26:cb:4e:82:6f
>[34836.213264] wlan0: send auth to 00:26:cb:4e:82:6f (try 1/3)
>[34836.213842] wlan0: authenticated
>[34836.214000] cfg80211: World regulatory domain updated:
>[34836.214041] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34836.214048] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.214054] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34836.214059] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34836.214065] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.214070] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.214334] cfg80211: Calling CRDA for country: US
>[34836.215819] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[34836.222448] cfg80211: Regulatory domain changed to country: US
>[34836.222452] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34836.222455] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[34836.222457] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[34836.222460] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.222462] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.222465] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.222467] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[34836.223053] wlan0: associate with 00:26:cb:4e:82:6f (try 1/3)
>[34836.224840] wlan0: RX AssocResp from 00:26:cb:4e:82:6f (capab=0x11 status=0 aid=7)
>[34836.225197] wlan0: associated
>[34836.225261] cfg80211: Calling CRDA for country: US
>[34836.227554] ath: regdomain 0x8348 updated by CountryIE
>[34836.227558] ath: EEPROM regdomain: 0x8348
>[34836.227560] ath: EEPROM indicates we should expect a country code
>[34836.227562] ath: doing EEPROM country->regdmn map search
>[34836.227564] ath: country maps to regdmn code: 0x3a
>[34836.227566] ath: Country alpha2 being used: US
>[34836.227567] ath: Regpair used: 0x3a
>[34836.227569] cfg80211: Regulatory domain changed to country: US
>[34836.227570] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34836.227573] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[34836.227576] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[34836.227578] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.227581] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.227583] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34836.227585] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35019.213314] wlan0: authenticate with 00:26:cb:4e:85:4f
>[35019.217701] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[35019.218261] wlan0: authenticated
>[35019.220087] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35019.227037] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[35019.229103] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[35019.229656] wlan0: associated
>[35127.464319] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[35127.483191] cfg80211: Calling CRDA to update world regulatory domain
>[35127.500960] cfg80211: World regulatory domain updated:
>[35127.500965] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35127.500968] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.500970] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35127.500973] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35127.500975] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.500978] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.500997] cfg80211: Calling CRDA for country: US
>[35127.510903] cfg80211: Regulatory domain changed to country: US
>[35127.510908] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35127.510911] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35127.510913] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35127.510916] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.510918] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.510920] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35127.510923] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35128.726104] PM: Syncing filesystems ... done.
>[35128.743249] PM: Preparing system for mem sleep
>[35128.869206] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[35128.881235] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[35128.892169] PM: Entering mem sleep
>[35128.892208] Suspending console(s) (use no_console_suspend to debug)
>[35128.892649] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[35128.908705] serial 00:0a: disabled
>[35128.909410] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[35128.909423] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[35128.911124] ACPI handle has no context!
>[35128.912775] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[35128.921148] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[35128.957686] sd 0:0:0:0: [sda] Stopping disk
>[35129.557169] PM: suspend of devices complete after 664.712 msecs
>[35129.557314] PM: late suspend of devices complete after 0.142 msecs
>[35129.568278] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[35129.579037] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[35129.579130] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[35129.589033] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[35129.589038] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[35129.589338] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[35129.600039] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[35129.600135] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[35129.600139] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[35129.600224] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[35129.600275] PM: noirq suspend of devices complete after 42.957 msecs
>[35129.600755] ACPI: Preparing to enter system sleep state S3
>[35129.643059] PM: Saving platform NVS memory
>[35129.643883] Disabling non-boot CPUs ...
>[35129.645314] smpboot: CPU 1 is now offline
>[35129.646444] Extended CMOS year: 2000
>[35129.646444] ACPI: Low-level resume complete
>[35129.646444] PM: Restoring platform NVS memory
>[35129.646444] Extended CMOS year: 2000
>[35129.646444] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[35129.663266] Enabling non-boot CPUs ...
>[35129.663471] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[35129.681012] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[35129.688032] CPU1 is up
>[35129.690391] ACPI: Waking up from system sleep state S3
>[35129.883236] i915 0000:00:02.0: power state changed by ACPI to D0
>[35129.905325] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[35129.905331] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[35129.905404] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[35129.905408] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[35129.916228] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[35129.927519] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[35129.937156] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[35129.937232] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[35129.937237] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[35129.948234] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[35129.992433] PM: noirq resume of devices complete after 109.266 msecs
>[35129.992552] PM: early resume of devices complete after 0.071 msecs
>[35129.992597] i915 0000:00:02.0: setting latency timer to 64
>[35129.992688] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[35129.994228] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[35130.004883] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[35130.004913] usb usb3: root hub lost power or was reset
>[35130.004932] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[35130.004959] usb usb4: root hub lost power or was reset
>[35130.004977] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[35130.005067] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[35130.005131] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[35130.005142] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[35130.005154] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[35130.005181] usb usb5: root hub lost power or was reset
>[35130.005199] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[35130.005228] usb usb6: root hub lost power or was reset
>[35130.005246] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[35130.005272] pci 0000:00:1e.0: setting latency timer to 64
>[35130.005288] ata_piix 0000:00:1f.2: setting latency timer to 64
>[35130.005323] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35130.006343] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35130.113767] serial 00:0a: activated
>[35130.321080] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[35130.596081] firewire_core 0000:05:00.1: rediscovered device fw0
>[35133.030641] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[35133.030645] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[35133.030649] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[35133.030652] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[35133.030656] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[35133.071230] ata1.00: configured for UDMA/100
>[35133.071289] sd 0:0:0:0: [sda] Starting disk
>[35133.074062] Extended CMOS year: 2000
>[35133.215191] PM: resume of devices complete after 3222.634 msecs
>[35133.215368] PM: Finishing wakeup.
>[35133.215369] Restarting tasks ... done.
>[35133.254502] video LNXVIDEO:00: Restoring backlight state
>[35133.312732] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35133.372653] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35133.430285] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35133.487610] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[35133.923251] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[35134.024127] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[35134.024258] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[35134.044762] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[35142.457087] wlan0: authenticate with 00:26:cb:4e:85:40
>[35142.468357] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[35142.669057] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[35142.870058] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[35143.071041] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[35143.498256] wlan0: authenticate with 00:26:cb:4e:82:60
>[35143.508311] wlan0: send auth to 00:26:cb:4e:82:60 (try 1/3)
>[35143.511977] wlan0: authenticated
>[35143.512222] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35143.517027] wlan0: associate with 00:26:cb:4e:82:60 (try 1/3)
>[35143.718046] wlan0: associate with 00:26:cb:4e:82:60 (try 2/3)
>[35143.782529] wlan0: RX AssocResp from 00:26:cb:4e:82:60 (capab=0x431 status=0 aid=54)
>[35143.783041] wlan0: associated
>[35143.783126] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[35143.783273] cfg80211: Calling CRDA for country: US
>[35143.791687] ath: regdomain 0x8348 updated by CountryIE
>[35143.791691] ath: EEPROM regdomain: 0x8348
>[35143.791693] ath: EEPROM indicates we should expect a country code
>[35143.791695] ath: doing EEPROM country->regdmn map search
>[35143.791697] ath: country maps to regdmn code: 0x3a
>[35143.791699] ath: Country alpha2 being used: US
>[35143.791700] ath: Regpair used: 0x3a
>[35143.791702] cfg80211: Regulatory domain changed to country: US
>[35143.791704] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35143.791706] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35143.791709] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35143.791711] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35143.791714] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35143.791716] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35143.791718] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35157.536096] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[35317.636216] wlan0: authenticate with 00:26:cb:4e:85:4f
>[35317.641001] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[35317.641614] wlan0: authenticated
>[35317.642195] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35317.648046] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[35317.649874] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[35317.650160] wlan0: associated
>[35354.561196] wlan0: authenticate with 00:26:cb:4e:82:60
>[35354.566268] wlan0: send auth to 00:26:cb:4e:82:60 (try 1/3)
>[35354.572775] wlan0: authenticated
>[35354.572919] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35354.582028] wlan0: associate with 00:26:cb:4e:82:60 (try 1/3)
>[35354.585685] wlan0: RX AssocResp from 00:26:cb:4e:82:60 (capab=0x431 status=0 aid=54)
>[35354.586091] wlan0: associated
>[35416.149242] cfg80211: Calling CRDA to update world regulatory domain
>[35416.160774] cfg80211: World regulatory domain updated:
>[35416.160783] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35416.160789] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.160795] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35416.160800] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35416.160806] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.160811] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.160853] cfg80211: Calling CRDA for country: US
>[35416.165182] cfg80211: Regulatory domain changed to country: US
>[35416.165186] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35416.165188] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35416.165191] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35416.165194] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.165196] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.165198] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.165201] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35416.699523] wlan0: authenticate with 00:26:cb:4e:85:4f
>[35416.708878] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[35416.709458] wlan0: authenticated
>[35416.710251] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35416.715052] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[35416.717172] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[35416.717812] wlan0: associated
>[35416.717923] cfg80211: Calling CRDA for country: US
>[35416.723504] ath: regdomain 0x8348 updated by CountryIE
>[35416.723512] ath: EEPROM regdomain: 0x8348
>[35416.723516] ath: EEPROM indicates we should expect a country code
>[35416.723521] ath: doing EEPROM country->regdmn map search
>[35416.723526] ath: country maps to regdmn code: 0x3a
>[35416.723530] ath: Country alpha2 being used: US
>[35416.723533] ath: Regpair used: 0x3a
>[35416.723537] cfg80211: Regulatory domain changed to country: US
>[35416.723540] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35416.723546] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35416.723552] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35416.723558] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.723563] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.723568] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35416.723573] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35858.631213] wlan0: authenticate with 00:26:cb:4e:82:6f
>[35858.635629] wlan0: direct probe to 00:26:cb:4e:82:6f (try 1/3)
>[35858.836058] wlan0: direct probe to 00:26:cb:4e:82:6f (try 2/3)
>[35859.037056] wlan0: direct probe to 00:26:cb:4e:82:6f (try 3/3)
>[35859.238041] wlan0: authentication with 00:26:cb:4e:82:6f timed out
>[35859.665270] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[35859.669605] cfg80211: Calling CRDA to update world regulatory domain
>[35859.671578] wlan0: authenticate with 00:26:cb:4e:85:4f
>[35859.677873] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[35859.678412] cfg80211: World regulatory domain updated:
>[35859.678419] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35859.678426] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.678432] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35859.678437] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[35859.678443] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.678448] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.678467] wlan0: authenticated
>[35859.678479] cfg80211: Calling CRDA for country: US
>[35859.681629] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[35859.688431] cfg80211: Regulatory domain changed to country: US
>[35859.688434] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35859.688437] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35859.688440] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35859.688442] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.688445] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.688447] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.688449] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[35859.689032] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[35859.690629] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[35859.690956] wlan0: associated
>[35859.691032] cfg80211: Calling CRDA for country: US
>[35859.693576] ath: regdomain 0x8348 updated by CountryIE
>[35859.693580] ath: EEPROM regdomain: 0x8348
>[35859.693581] ath: EEPROM indicates we should expect a country code
>[35859.693584] ath: doing EEPROM country->regdmn map search
>[35859.693586] ath: country maps to regdmn code: 0x3a
>[35859.693588] ath: Country alpha2 being used: US
>[35859.693589] ath: Regpair used: 0x3a
>[35859.693591] cfg80211: Regulatory domain changed to country: US
>[35859.693592] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[35859.693595] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[35859.693598] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[35859.693600] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.693603] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.693605] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[35859.693607] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[36018.002176] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[37138.591079] ath5k: ath5k_hw_get_isr: ISR: 0x00000001 IMR: 0x00000000
>[38298.004352] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[40494.576910] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[40734.877368] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[42746.412197] wlan0: authenticate with 00:26:cb:4e:86:b0
>[42746.416871] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 1/3)
>[42746.617059] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 2/3)
>[42746.818027] wlan0: direct probe to 00:26:cb:4e:86:b0 (try 3/3)
>[42747.019069] wlan0: authentication with 00:26:cb:4e:86:b0 timed out
>[42747.324376] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=2)
>[42747.329858] cfg80211: Calling CRDA to update world regulatory domain
>[42747.331905] wlan0: authenticate with 00:26:cb:4e:85:4f
>[42747.336999] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[42747.337735] wlan0: authenticated
>[42747.341149] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[42747.348845] cfg80211: World regulatory domain updated:
>[42747.348848] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42747.348851] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.348854] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42747.348857] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42747.348859] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.348861] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.348876] cfg80211: Calling CRDA for country: US
>[42747.349033] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[42747.350326] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=1)
>[42747.350650] wlan0: associated
>[42747.351772] cfg80211: Regulatory domain changed to country: US
>[42747.351775] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42747.351778] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[42747.351781] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[42747.351783] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.351786] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.351788] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.351790] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[42747.351804] cfg80211: Calling CRDA for country: US
>[42747.354328] ath: regdomain 0x8348 updated by CountryIE
>[42747.354332] ath: EEPROM regdomain: 0x8348
>[42747.354333] ath: EEPROM indicates we should expect a country code
>[42747.354336] ath: doing EEPROM country->regdmn map search
>[42747.354338] ath: country maps to regdmn code: 0x3a
>[42747.354340] ath: Country alpha2 being used: US
>[42747.354341] ath: Regpair used: 0x3a
>[42747.354343] cfg80211: Regulatory domain changed to country: US
>[42747.354344] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42747.354347] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[42747.354350] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[42747.354352] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.354354] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.354357] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42747.354359] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[44418.004270] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[44658.705062] usb 5-1: new low-speed USB device number 2 using uhci_hcd
>[44658.877125] usb 5-1: New USB device found, idVendor=045e, idProduct=00f9
>[44658.877136] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[44658.877144] usb 5-1: Product: Microsoft Wireless Desktop Receiver 3.1
>[44658.877150] usb 5-1: Manufacturer: Microsft
>[44658.895212] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
>[44658.895808] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.0-1/input0
>[44658.985254] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
>[44659.037569] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8
>[44659.038431] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.0-1/input1
>[45498.003954] ath5k: ath5k_hw_get_isr: ISR: 0x00000080 IMR: 0x00000000
>[46100.833666] wlan0: deauthenticating from 00:26:cb:4e:85:4f by local choice (reason=3)
>[46100.845615] cfg80211: Calling CRDA to update world regulatory domain
>[46100.954166] usb 5-1: USB disconnect, device number 2
>[46101.346800] cfg80211: World regulatory domain updated:
>[46101.346806] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[46101.346809] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.346812] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[46101.346814] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[46101.346817] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.346819] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.346835] cfg80211: Calling CRDA for country: US
>[46101.353677] cfg80211: Regulatory domain changed to country: US
>[46101.353682] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[46101.353685] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[46101.353688] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[46101.353690] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.353692] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.353695] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46101.353697] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[46103.131124] PM: Syncing filesystems ... done.
>[46103.144318] PM: Preparing system for mem sleep
>[46103.246094] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[46103.258203] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[46103.269169] PM: Entering mem sleep
>[46103.269215] Suspending console(s) (use no_console_suspend to debug)
>[46103.269812] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[46103.284313] serial 00:0a: disabled
>[46103.284577] ACPI handle has no context!
>[46103.284876] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
>[46103.284885] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
>[46103.287599] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
>[46103.299088] i915 0000:00:02.0: power state changed by ACPI to D3hot
>[46103.449448] sd 0:0:0:0: [sda] Stopping disk
>[46104.043110] PM: suspend of devices complete after 773.637 msecs
>[46104.043250] PM: late suspend of devices complete after 0.137 msecs
>[46104.054268] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[46104.065036] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3hot
>[46104.065138] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
>[46104.075035] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[46104.075039] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D2
>[46104.075339] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[46104.086039] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3hot
>[46104.086137] uhci_hcd 0000:00:1a.1: wake-up capability enabled by ACPI
>[46104.086141] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D2
>[46104.086222] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[46104.086274] PM: noirq suspend of devices complete after 43.020 msecs
>[46104.086752] ACPI: Preparing to enter system sleep state S3
>[46104.129058] PM: Saving platform NVS memory
>[46104.129707] Disabling non-boot CPUs ...
>[46104.131091] smpboot: CPU 1 is now offline
>[46104.131774] Extended CMOS year: 2000
>[46104.131774] ACPI: Low-level resume complete
>[46104.131774] PM: Restoring platform NVS memory
>[46104.131774] Extended CMOS year: 2000
>[46104.131774] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
>[46104.148655] Enabling non-boot CPUs ...
>[46104.148847] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[46104.166012] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
>[46104.173035] CPU1 is up
>[46104.175374] ACPI: Waking up from system sleep state S3
>[46104.379240] i915 0000:00:02.0: power state changed by ACPI to D0
>[46104.401322] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[46104.401328] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
>[46104.401399] uhci_hcd 0000:00:1a.1: wake-up capability disabled by ACPI
>[46104.401403] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
>[46104.412231] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[46104.423514] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
>[46104.433150] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[46104.433234] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
>[46104.433239] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
>[46104.444243] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[46104.488441] PM: noirq resume of devices complete after 109.270 msecs
>[46104.488560] PM: early resume of devices complete after 0.070 msecs
>[46104.488606] i915 0000:00:02.0: setting latency timer to 64
>[46104.488624] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
>[46104.490447] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[46104.501081] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[46104.501110] usb usb3: root hub lost power or was reset
>[46104.501130] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[46104.501157] usb usb4: root hub lost power or was reset
>[46104.501175] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[46104.501255] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[46104.501401] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
>[46104.501413] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
>[46104.501424] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[46104.501452] usb usb5: root hub lost power or was reset
>[46104.501469] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[46104.501495] usb usb6: root hub lost power or was reset
>[46104.501515] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[46104.501541] pci 0000:00:1e.0: setting latency timer to 64
>[46104.501557] ata_piix 0000:00:1f.2: setting latency timer to 64
>[46104.501593] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46104.502613] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46104.609645] serial 00:0a: activated
>[46104.817071] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
>[46105.093077] firewire_core 0000:05:00.1: rediscovered device fw0
>[46107.732222] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[46107.732226] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[46107.732229] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
>[46107.732233] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[46107.732236] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[46107.773239] ata1.00: configured for UDMA/100
>[46107.773278] sd 0:0:0:0: [sda] Starting disk
>[46107.776627] Extended CMOS year: 2000
>[46107.919190] PM: resume of devices complete after 3430.625 msecs
>[46107.919369] PM: Finishing wakeup.
>[46107.919370] Restarting tasks ... done.
>[46107.951425] video LNXVIDEO:00: Restoring backlight state
>[46108.010038] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46108.069410] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46108.127377] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46108.184359] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
>[46108.769330] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[46108.870163] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
>[46108.870302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[46108.884981] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[46117.291849] wlan0: authenticate with 00:26:cb:4e:85:40
>[46117.306480] wlan0: direct probe to 00:26:cb:4e:85:40 (try 1/3)
>[46117.507042] wlan0: direct probe to 00:26:cb:4e:85:40 (try 2/3)
>[46117.708046] wlan0: direct probe to 00:26:cb:4e:85:40 (try 3/3)
>[46117.909045] wlan0: authentication with 00:26:cb:4e:85:40 timed out
>[46118.338730] wlan0: authenticate with 00:26:cb:4e:82:60
>[46118.348533] wlan0: send auth to 00:26:cb:4e:82:60 (try 1/3)
>[46118.356275] wlan0: authenticated
>[46118.356978] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[46118.362035] wlan0: associate with 00:26:cb:4e:82:60 (try 1/3)
>[46118.563037] wlan0: associate with 00:26:cb:4e:82:60 (try 2/3)
>[46118.597193] wlan0: RX AssocResp from 00:26:cb:4e:82:60 (capab=0x431 status=0 aid=19)
>[46118.597684] wlan0: associated
>[46118.597757] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[46118.597900] cfg80211: Calling CRDA for country: US
>[46118.608294] ath: regdomain 0x8348 updated by CountryIE
>[46118.608297] ath: EEPROM regdomain: 0x8348
>[46118.608299] ath: EEPROM indicates we should expect a country code
>[46118.608301] ath: doing EEPROM country->regdmn map search
>[46118.608303] ath: country maps to regdmn code: 0x3a
>[46118.608304] ath: Country alpha2 being used: US
>[46118.608306] ath: Regpair used: 0x3a
>[46118.608307] cfg80211: Regulatory domain changed to country: US
>[46118.608309] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[46118.608311] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
>[46118.608313] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
>[46118.608316] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46118.608318] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46118.608320] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[46118.608322] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
>[46143.909220] wlan0: authenticate with 00:26:cb:4e:85:4f
>[46143.919023] wlan0: send auth to 00:26:cb:4e:85:4f (try 1/3)
>[46143.919800] wlan0: authenticated
>[46143.921576] ath5k 0000:03:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[46143.927026] wlan0: associate with 00:26:cb:4e:85:4f (try 1/3)
>[46143.928741] wlan0: RX AssocResp from 00:26:cb:4e:85:4f (capab=0x11 status=0 aid=2)
>[46143.929020] wlan0: associated

Actions: View

Attachments on bug 877119: 645796 | 645797 | 645798 | 645799 | 645800 | 645801