Attachment 648864 Details for Bug 878659 – File: dmesg

File: dmesg

dmesg (text/plain), 227.02 KB, created by Lorenzo Pistone on 2012-11-20 21:34:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lorenzo Pistone

Created: 2012-11-20 21:34:36 UTC

Size: 227.02 KB

patch

obsolete

>[61043.718398]  binfmt_misc uinput sdhci_pci sdhci mmc_core video radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core
>[61043.718426] Pid: 25807, comm: kworker/u:48 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[61043.718430] Call Trace:
>[61043.718445]  [<ffffffff8105b8ef>] warn_slowpath_common+0x7f/0xc0
>[61043.718457]  [<ffffffff8105b9e6>] warn_slowpath_fmt+0x46/0x50
>[61043.718469]  [<ffffffff814cc4dd>] ? led_set_brightness+0x4d/0x60
>[61043.718487]  [<ffffffffa03de593>] iwlagn_mac_flush+0x1a3/0x1b0 [iwldvm]
>[61043.718527]  [<ffffffffa0744b86>] __ieee80211_recalc_idle+0x236/0x2f0 [mac80211]
>[61043.718564]  [<ffffffffa0744d93>] ieee80211_recalc_idle+0x33/0x60 [mac80211]
>[61043.718605]  [<ffffffffa076fa90>] ieee80211_sta_connection_lost.isra.19+0x80/0xc0 [mac80211]
>[61043.718649]  [<ffffffffa0772178>] ieee80211_sta_work+0x168/0xd30 [mac80211]
>[61043.718670]  [<ffffffffa03de4c5>] ? iwlagn_mac_flush+0xd5/0x1b0 [iwldvm]
>[61043.718708]  [<ffffffffa076fd6d>] ? ieee80211_mgd_probe_ap_send+0x12d/0x1f0 [mac80211]
>[61043.718749]  [<ffffffffa076daa1>] ? ieee80211_cqm_rssi_notify+0x41/0xa0 [mac80211]
>[61043.718786]  [<ffffffffa07443d9>] ieee80211_iface_work+0x2c9/0x360 [mac80211]
>[61043.718795]  [<ffffffff81077cb7>] process_one_work+0x147/0x4a0
>[61043.718828]  [<ffffffffa0744110>] ? ieee80211_check_queues+0x100/0x100 [mac80211]
>[61043.718840]  [<ffffffff81079a1e>] worker_thread+0x15e/0x480
>[61043.718848]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[61043.718855]  [<ffffffff8107ede3>] kthread+0x93/0xa0
>[61043.718865]  [<ffffffff816269c4>] kernel_thread_helper+0x4/0x10
>[61043.718872]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[61043.718883]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[61043.718887] ---[ end trace bcf49c0bc5942da9 ]---
>[61043.718990] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[61043.722646] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[61043.723838] cfg80211: Calling CRDA to update world regulatory domain
>[61043.771697] cfg80211: World regulatory domain updated:
>[61043.771706] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61043.771712] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61043.771718] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61043.771723] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61043.771728] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61043.771733] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61043.771762] cfg80211: Calling CRDA for country: SE
>[61043.778893] cfg80211: Regulatory domain changed to country: SE
>[61043.778900] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61043.778906] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61043.778911] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61043.778916] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61043.778921] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61044.056912] wlan0: authenticate with 00:26:99:2e:0f:50
>[61044.059910] wlan0: send auth to 00:26:99:2e:0f:50 (try 1/3)
>[61044.260039] wlan0: send auth to 00:26:99:2e:0f:50 (try 2/3)
>[61044.261184] wlan0: authenticated
>[61044.262091] wlan0: associate with 00:26:99:2e:0f:50 (try 1/3)
>[61044.272327] wlan0: RX AssocResp from 00:26:99:2e:0f:50 (capab=0x431 status=0 aid=170)
>[61044.274301] wlan0: associated
>[61044.274447] cfg80211: Calling CRDA for country: SE
>[61044.282617] cfg80211: Regulatory domain changed to country: SE
>[61044.282626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61044.282632] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61044.282638] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61044.282643] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61044.282648] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61122.629126] wlan0: disassociating from 00:26:99:2e:0f:50 by local choice (reason=3)
>[61122.654174] cfg80211: Calling CRDA to update world regulatory domain
>[61122.657378] wlan0: deauthenticating from 00:26:99:2e:0f:50 by local choice (reason=3)
>[61122.674061] cfg80211: World regulatory domain updated:
>[61122.674069] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61122.674075] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61122.674085] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61122.674091] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61122.674096] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61122.674101] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61122.674127] cfg80211: Calling CRDA for country: SE
>[61122.677083] cfg80211: Regulatory domain changed to country: SE
>[61122.677086] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61122.677088] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61122.677090] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61122.677091] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61122.677093] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61125.847470] wlan0: authenticate with 00:3a:98:5c:29:8d
>[61125.856320] wlan0: send auth to 00:3a:98:5c:29:8d (try 1/3)
>[61126.057027] wlan0: send auth to 00:3a:98:5c:29:8d (try 2/3)
>[61126.057888] wlan0: authenticated
>[61126.059039] wlan0: associate with 00:3a:98:5c:29:8d (try 1/3)
>[61126.064596] wlan0: RX AssocResp from 00:3a:98:5c:29:8d (capab=0x111 status=0 aid=28)
>[61126.070058] wlan0: associated
>[61126.070197] cfg80211: Calling CRDA for country: SE
>[61126.076761] cfg80211: Regulatory domain changed to country: SE
>[61126.076768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61126.076779] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61126.076785] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61126.076790] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61126.076795] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61135.937943] device p3p1 left promiscuous mode
>[61197.079545] wlan0: disassociating from 00:3a:98:5c:29:8d by local choice (reason=3)
>[61197.105072] cfg80211: Calling CRDA to update world regulatory domain
>[61197.108000] wlan0: deauthenticating from 00:3a:98:5c:29:8d by local choice (reason=3)
>[61197.116443] cfg80211: World regulatory domain updated:
>[61197.116451] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61197.116457] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61197.116462] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61197.116468] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61197.116473] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61197.116478] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61197.116507] cfg80211: Calling CRDA for country: SE
>[61197.121388] cfg80211: Regulatory domain changed to country: SE
>[61197.121395] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61197.121401] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61197.121406] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61197.121412] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61197.121417] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61200.318058] wlan0: authenticate with 00:3a:99:49:29:ad
>[61200.323496] wlan0: send auth to 00:3a:99:49:29:ad (try 1/3)
>[61200.524072] wlan0: send auth to 00:3a:99:49:29:ad (try 2/3)
>[61200.524938] wlan0: authenticated
>[61200.526048] wlan0: associate with 00:3a:99:49:29:ad (try 1/3)
>[61200.530846] wlan0: RX AssocResp from 00:3a:99:49:29:ad (capab=0x111 status=0 aid=4)
>[61200.533583] wlan0: associated
>[61200.533717] cfg80211: Calling CRDA for country: SE
>[61200.537469] cfg80211: Regulatory domain changed to country: SE
>[61200.537472] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61200.537474] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61200.537476] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61200.537478] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61200.537479] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61232.407295] vboxnetflt: dropped 0 out of 0 packets
>[61232.412045] vboxnetflt: dropped 0 out of 15904 packets
>[61232.412054] device wlan0 left promiscuous mode
>[61236.119719] wlan0: authenticate with 00:27:0d:07:79:92
>[61236.123493] wlan0: send auth to 00:27:0d:07:79:92 (try 1/3)
>[61236.324030] wlan0: send auth to 00:27:0d:07:79:92 (try 2/3)
>[61236.326653] wlan0: authenticated
>[61236.326877] wlan0: waiting for beacon from 00:27:0d:07:79:92
>[61236.410029] wlan0: associate with 00:27:0d:07:79:92 (try 1/3)
>[61236.418216] wlan0: RX AssocResp from 00:27:0d:07:79:92 (capab=0x431 status=0 aid=174)
>[61236.420494] wlan0: associated
>[61237.372983] device vboxnet0 left promiscuous mode
>[61237.376053] vboxnetflt: dropped 17001 out of 17246 packets
>[61271.957468] wlan0: authenticate with 00:3a:99:7e:5e:8f
>[61271.960611] wlan0: send auth to 00:3a:99:7e:5e:8f (try 1/3)
>[61272.161065] wlan0: send auth to 00:3a:99:7e:5e:8f (try 2/3)
>[61272.161918] wlan0: authenticated
>[61272.163039] wlan0: associate with 00:3a:99:7e:5e:8f (try 1/3)
>[61272.364059] wlan0: associate with 00:3a:99:7e:5e:8f (try 2/3)
>[61272.382127] wlan0: RX AssocResp from 00:3a:99:7e:5e:8f (capab=0x111 status=0 aid=8)
>[61272.384963] wlan0: associated
>[61301.090234] wlan0: authenticate with 00:3a:99:49:29:ad
>[61301.093390] wlan0: send auth to 00:3a:99:49:29:ad (try 1/3)
>[61301.294054] wlan0: send auth to 00:3a:99:49:29:ad (try 2/3)
>[61301.294964] wlan0: authenticated
>[61301.295386] wlan0: waiting for beacon from 00:3a:99:49:29:ad
>[61301.335060] wlan0: associate with 00:3a:99:49:29:ad (try 1/3)
>[61301.536051] wlan0: associate with 00:3a:99:49:29:ad (try 2/3)
>[61301.737055] wlan0: associate with 00:3a:99:49:29:ad (try 3/3)
>[61301.742110] wlan0: RX AssocResp from 00:3a:99:49:29:ad (capab=0x111 status=0 aid=4)
>[61301.745253] wlan0: associated
>[61371.600965] wlan0: authenticate with 00:3a:99:7e:5e:8f
>[61371.604266] wlan0: send auth to 00:3a:99:7e:5e:8f (try 1/3)
>[61371.805059] wlan0: send auth to 00:3a:99:7e:5e:8f (try 2/3)
>[61371.806118] wlan0: authenticated
>[61371.807034] wlan0: associate with 00:3a:99:7e:5e:8f (try 1/3)
>[61371.812809] wlan0: RX AssocResp from 00:3a:99:7e:5e:8f (capab=0x111 status=0 aid=8)
>[61371.815644] wlan0: associated
>[61576.860315] wlan0: authenticate with 00:3a:99:7e:5e:80
>[61576.863547] wlan0: direct probe to 00:3a:99:7e:5e:80 (try 1/3)
>[61577.064060] wlan0: direct probe to 00:3a:99:7e:5e:80 (try 2/3)
>[61577.265059] wlan0: direct probe to 00:3a:99:7e:5e:80 (try 3/3)
>[61577.466055] wlan0: authentication with 00:3a:99:7e:5e:80 timed out
>[61577.747091] wlan0: deauthenticating from 00:3a:99:7e:5e:8f by local choice (reason=2)
>[61577.747748] cfg80211: Calling CRDA to update world regulatory domain
>[61577.750671] wlan0: authenticate with 00:27:0d:07:79:92
>[61577.756524] wlan0: send auth to 00:27:0d:07:79:92 (try 1/3)
>[61577.758193] cfg80211: World regulatory domain updated:
>[61577.758196] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61577.758198] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61577.758200] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61577.758202] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61577.758204] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61577.758205] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61577.758219] cfg80211: Calling CRDA for country: SE
>[61577.760492] cfg80211: Regulatory domain changed to country: SE
>[61577.760494] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61577.760496] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61577.760498] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61577.760499] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61577.760501] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61578.059964] wlan0: send auth to 00:27:0d:07:79:92 (try 2/3)
>[61578.061642] wlan0: authenticated
>[61578.066710] wlan0: authenticate with 00:3a:99:7e:5e:8f
>[61578.069907] wlan0: send auth to 00:3a:99:7e:5e:8f (try 1/3)
>[61578.270065] wlan0: send auth to 00:3a:99:7e:5e:8f (try 2/3)
>[61578.271239] wlan0: authenticated
>[61578.272055] wlan0: associate with 00:3a:99:7e:5e:8f (try 1/3)
>[61578.274165] wlan0: RX AssocResp from 00:3a:99:7e:5e:8f (capab=0x111 status=0 aid=8)
>[61578.277118] wlan0: associated
>[61578.277248] cfg80211: Calling CRDA for country: SE
>[61578.283428] cfg80211: Regulatory domain changed to country: SE
>[61578.283435] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61578.283441] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61578.283446] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61578.283451] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61578.283456] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61649.154253] wlan0: authenticate with 00:3a:99:49:29:ad
>[61649.157473] wlan0: send auth to 00:3a:99:49:29:ad (try 1/3)
>[61649.358058] wlan0: send auth to 00:3a:99:49:29:ad (try 2/3)
>[61649.559058] wlan0: send auth to 00:3a:99:49:29:ad (try 3/3)
>[61649.760280] wlan0: authentication with 00:3a:99:49:29:ad timed out
>[61650.120824] wlan0: deauthenticating from 00:3a:99:7e:5e:8f by local choice (reason=2)
>[61650.121201] cfg80211: Calling CRDA to update world regulatory domain
>[61650.122798] wlan0: authenticate with 00:3a:99:7e:5e:8f
>[61650.127592] wlan0: send auth to 00:3a:99:7e:5e:8f (try 1/3)
>[61650.127850] cfg80211: World regulatory domain updated:
>[61650.127852] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61650.127854] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61650.127856] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61650.127857] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[61650.127859] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61650.127861] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[61650.127869] cfg80211: Calling CRDA for country: SE
>[61650.129847] cfg80211: Regulatory domain changed to country: SE
>[61650.129850] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61650.129852] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61650.129854] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61650.129855] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61650.129857] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61650.328050] wlan0: send auth to 00:3a:99:7e:5e:8f (try 2/3)
>[61650.529055] wlan0: send auth to 00:3a:99:7e:5e:8f (try 3/3)
>[61650.530097] wlan0: authenticated
>[61652.837023] wlan0: authenticate with 00:24:14:8b:61:42
>[61652.839941] wlan0: direct probe to 00:24:14:8b:61:42 (try 1/3)
>[61653.040055] wlan0: direct probe to 00:24:14:8b:61:42 (try 2/3)
>[61653.241059] wlan0: direct probe to 00:24:14:8b:61:42 (try 3/3)
>[61653.442059] wlan0: authentication with 00:24:14:8b:61:42 timed out
>[61653.636281] wlan0: authenticate with 00:3a:98:5c:15:2d
>[61653.640274] wlan0: direct probe to 00:3a:98:5c:15:2d (try 1/3)
>[61653.841058] wlan0: direct probe to 00:3a:98:5c:15:2d (try 2/3)
>[61654.042058] wlan0: direct probe to 00:3a:98:5c:15:2d (try 3/3)
>[61654.243035] wlan0: authentication with 00:3a:98:5c:15:2d timed out
>[61656.590807] wlan0: authenticate with 00:27:0d:07:79:9d
>[61656.595972] wlan0: direct probe to 00:27:0d:07:79:9d (try 1/3)
>[61656.797056] wlan0: direct probe to 00:27:0d:07:79:9d (try 2/3)
>[61656.998060] wlan0: direct probe to 00:27:0d:07:79:9d (try 3/3)
>[61657.199026] wlan0: authentication with 00:27:0d:07:79:9d timed out
>[61659.482305] wlan0: authenticate with 00:27:0d:0b:bf:cd
>[61659.486677] wlan0: send auth to 00:27:0d:0b:bf:cd (try 1/3)
>[61659.687058] wlan0: send auth to 00:27:0d:0b:bf:cd (try 2/3)
>[61659.688703] wlan0: authenticated
>[61659.690024] wlan0: associate with 00:27:0d:0b:bf:cd (try 1/3)
>[61659.698002] wlan0: RX AssocResp from 00:27:0d:0b:bf:cd (capab=0x111 status=0 aid=16)
>[61659.699901] wlan0: associated
>[61659.700060] cfg80211: Calling CRDA for country: SE
>[61659.708735] cfg80211: Regulatory domain changed to country: SE
>[61659.708743] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[61659.708749] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61659.708754] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61659.708759] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[61659.708764] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[61781.009360] wlan0: authenticate with 00:27:0d:07:80:32
>[61781.013693] wlan0: send auth to 00:27:0d:07:80:32 (try 1/3)
>[61781.015082] wlan0: authenticated
>[61781.017053] wlan0: associate with 00:27:0d:07:80:32 (try 1/3)
>[61781.020122] wlan0: RX AssocResp from 00:27:0d:07:80:32 (capab=0x431 status=0 aid=158)
>[61781.021747] wlan0: associated
>[64336.635148] device vboxnet0 entered promiscuous mode
>[64341.141176] device p3p1 entered promiscuous mode
>[65381.003264] wlan0: deauthenticated from 00:27:0d:07:80:32 (Reason: 15)
>[65381.014190] cfg80211: Calling CRDA to update world regulatory domain
>[65381.021880] cfg80211: World regulatory domain updated:
>[65381.021883] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[65381.021885] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[65381.021887] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[65381.021889] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[65381.021890] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[65381.021892] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[65381.021905] cfg80211: Calling CRDA for country: SE
>[65381.024696] cfg80211: Regulatory domain changed to country: SE
>[65381.024699] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[65381.024701] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.024702] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.024704] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.024706] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[65381.413812] wlan0: authenticate with 00:27:0d:0b:bf:cd
>[65381.419750] wlan0: send auth to 00:27:0d:0b:bf:cd (try 1/3)
>[65381.620013] wlan0: send auth to 00:27:0d:0b:bf:cd (try 2/3)
>[65381.622669] wlan0: authenticated
>[65381.663017] wlan0: associate with 00:27:0d:0b:bf:cd (try 1/3)
>[65381.665366] wlan0: RX AssocResp from 00:27:0d:0b:bf:cd (capab=0x111 status=0 aid=15)
>[65381.667151] wlan0: associated
>[65381.667221] cfg80211: Calling CRDA for country: SE
>[65381.669527] cfg80211: Regulatory domain changed to country: SE
>[65381.669530] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[65381.669532] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.669533] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.669535] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[65381.669537] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[66118.064682] wlan0: deauthenticating from 00:27:0d:0b:bf:cd by local choice (reason=3)
>[66118.086628] cfg80211: Calling CRDA to update world regulatory domain
>[66118.100670] cfg80211: World regulatory domain updated:
>[66118.100673] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66118.100675] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[66118.100677] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[66118.100679] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[66118.100681] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[66118.100682] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[66118.100701] cfg80211: Calling CRDA for country: SE
>[66118.117919] cfg80211: Regulatory domain changed to country: SE
>[66118.117923] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66118.117925] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66118.117926] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66118.117928] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66118.117930] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[66148.110280] wlan0: authenticate with 00:27:0d:0b:bf:ce
>[66148.118241] wlan0: send auth to 00:27:0d:0b:bf:ce (try 1/3)
>[66148.119514] wlan0: authenticated
>[66148.121068] wlan0: associate with 00:27:0d:0b:bf:ce (try 1/3)
>[66148.322029] wlan0: associate with 00:27:0d:0b:bf:ce (try 2/3)
>[66148.323321] wlan0: RX AssocResp from 00:27:0d:0b:bf:ce (capab=0x101 status=12 aid=0)
>[66148.323328] wlan0: 00:27:0d:0b:bf:ce denied association (code=12)
>[66148.327866] wlan0: deauthenticating from 00:27:0d:0b:bf:ce by local choice (reason=3)
>[66148.942671] wlan0: authenticate with 00:26:cb:ad:1f:2e
>[66148.947791] wlan0: send auth to 00:26:cb:ad:1f:2e (try 1/3)
>[66149.148041] wlan0: send auth to 00:26:cb:ad:1f:2e (try 2/3)
>[66149.148749] wlan0: authenticated
>[66149.149021] wlan0: associate with 00:26:cb:ad:1f:2e (try 1/3)
>[66149.156403] wlan0: RX AssocResp from 00:26:cb:ad:1f:2e (capab=0x101 status=0 aid=15)
>[66149.158354] wlan0: associated
>[66149.158477] cfg80211: Calling CRDA for country: SE
>[66149.173927] cfg80211: Regulatory domain changed to country: SE
>[66149.173935] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[66149.173941] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66149.173946] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66149.173951] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[66149.173956] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[66512.793402] wlan0: authenticate with 00:27:0d:07:80:31
>[66512.796383] wlan0: send auth to 00:27:0d:07:80:31 (try 1/3)
>[66512.797530] wlan0: authenticated
>[66512.798190] wlan0: waiting for beacon from 00:27:0d:07:80:31
>[66512.835013] wlan0: associate with 00:27:0d:07:80:31 (try 1/3)
>[66512.840597] wlan0: RX AssocResp from 00:27:0d:07:80:31 (capab=0x421 status=0 aid=188)
>[66512.842303] wlan0: associated
>[67189.606858] device p3p1 left promiscuous mode
>[67193.470404] device p3p1 entered promiscuous mode
>[67328.047278] device p3p1 left promiscuous mode
>[67341.512078] vboxnetflt: dropped 0 out of 0 packets
>[67341.517220] vboxnetflt: dropped 0 out of 9106 packets
>[67346.482115] device vboxnet0 left promiscuous mode
>[67346.492286] vboxnetflt: dropped 4561 out of 4947 packets
>[68854.784533] wlan0: deauthenticating from 00:27:0d:07:80:31 by local choice (reason=3)
>[68854.795258] cfg80211: Calling CRDA to update world regulatory domain
>[68854.808741] cfg80211: World regulatory domain updated:
>[68854.808745] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[68854.808747] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[68854.808748] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[68854.808750] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[68854.808752] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[68854.808753] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[68854.808765] cfg80211: Calling CRDA for country: SE
>[68854.821594] cfg80211: Regulatory domain changed to country: SE
>[68854.821597] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[68854.821599] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68854.821601] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68854.821602] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68854.821604] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[68856.714636] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[68856.714641] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[68856.714643] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[68856.714646] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[68856.714656] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[68856.714658] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[68856.714660] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[68856.714662] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[68856.715503] PM: Basic memory bitmaps created
>[68856.715504] PM: Syncing filesystems ... done.
>[68856.736707] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[68856.748207] PM: Preallocating image memory... done (allocated 610098 pages)
>[68857.391384] PM: Allocated 2440392 kbytes in 0.64 seconds (3813.11 MB/s)
>[68857.391386] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[68857.402342] Suspending console(s) (use no_console_suspend to debug)
>[68857.402461] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[68857.402987] <6>[fglrx] IRQ 49 Disabled
>[68857.403040] <6>[fglrx] Preparing suspend fglrx in kernel.
>[68857.767050] <6>[fglrx] Suspending fglrx in kernel completed.
>[68857.767051] <6>[fglrx] Power down the ASIC .
>[68857.817164] PM: freeze of devices complete after 414.816 msecs
>[68857.817377] PM: late freeze of devices complete after 0.209 msecs
>[68857.818153] PM: noirq freeze of devices complete after 0.774 msecs
>[68857.818697] ACPI: Preparing to enter system sleep state S4
>[68857.825114] PM: Saving platform NVS memory
>[68857.826031] Disabling non-boot CPUs ...
>[68857.827293] smpboot: CPU 1 is now offline
>[68857.827855] Extended CMOS year: 2000
>[68857.827924] PM: Creating hibernation image:
>[68857.828288] PM: Need to copy 379167 pages
>[68857.828288] PM: Normal pages needed: 379167 + 1024, available pages: 660298
>[68857.828288] PM: Restoring platform NVS memory
>[68857.828288] Extended CMOS year: 2000
>[68857.828288] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[68857.833166] Enabling non-boot CPUs ...
>[68857.833255] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[68857.846004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[68857.851022] CPU1 is up
>[68857.852764] ACPI: Waking up from system sleep state S4
>[68857.853210] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
>[68857.853234] pci 0000:02:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
>[68857.853315] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>[68857.853430] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
>[68857.853451] pci 0000:02:00.2: reg 10: [mem 0xf2100400-0xf21004ff]
>[68857.853638] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
>[68857.853658] pci 0000:02:00.3: reg 10: [mem 0xf2100800-0xf21008ff]
>[68857.855061] acpi device:33: parent device:20 should not be sleeping
>[68857.855100] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc000ffff pref]
>[68857.855102] pci 0000:02:00.0: BAR 0: assigned [mem 0xf2100000-0xf21000ff]
>[68857.855108] pci 0000:02:00.2: BAR 0: assigned [mem 0xf2100100-0xf21001ff]
>[68857.855114] pci 0000:02:00.3: BAR 0: assigned [mem 0xf2100200-0xf21002ff]
>[68857.855123] pci 0000:02:00.0: no hotplug settings from platform
>[68857.855126] pci 0000:02:00.2: no hotplug settings from platform
>[68857.855129] pci 0000:02:00.3: no hotplug settings from platform
>[68857.855176] pci 0000:02:00.0: parent 0000:00:1c.0 should not be sleeping
>[68857.855200] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
>[68857.855311] Registered led device: mmc0::
>[68857.875400] PM: noirq restore of devices complete after 22.464 msecs
>[68857.875483] PM: early restore of devices complete after 0.055 msecs
>[68857.967668] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
>[68857.967757] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[68857.967779] usb usb3: root hub lost power or was reset
>[68857.967786] pci 0000:02:00.2: parent 0000:00:1c.0 should not be sleeping
>[68857.967791] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[68857.967813] usb usb4: root hub lost power or was reset
>[68857.967824] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
>[68857.967825] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[68857.967845] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
>[68857.967851] usb usb5: root hub lost power or was reset
>[68857.967863] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[68857.967879] usb usb1: root hub lost power or was reset
>[68857.967932] pci 0000:02:00.3: parent 0000:00:1c.0 should not be sleeping
>[68857.968166] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[68857.968220] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[68857.968243] usb usb6: root hub lost power or was reset
>[68857.968254] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[68857.968278] usb usb7: root hub lost power or was reset
>[68857.968288] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[68857.968311] usb usb8: root hub lost power or was reset
>[68857.968323] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[68857.968338] usb usb2: root hub lost power or was reset
>[68857.971767] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[68857.971775] pci 0000:00:1e.0: setting latency timer to 64
>[68857.971787] ata_piix 0000:00:1f.2: setting latency timer to 64
>[68857.971799] ata_piix 0000:00:1f.5: setting latency timer to 64
>[68857.972228] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[68857.972284] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[68857.972352] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[68858.000518] <6>[fglrx] Power up the ASIC
>[68858.000530] <6>[fglrx] Preparing resume fglrx in kernel.
>[68858.025072] <6>[fglrx] Resuming fglrx in kernel completed.
>[68858.025176] <6>[fglrx] IRQ 49 Enabled
>[68858.292039] ata3: SATA link down (SStatus 0 SControl 300)
>[68858.300050] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[68858.303021] ata4: SATA link down (SStatus 0 SControl 300)
>[68858.432162] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[68858.432276] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[68858.441648] ata1.00: configured for UDMA/133
>[68858.441705] sd 0:0:0:0: [sda] Starting disk
>[68858.473235] ata2.00: configured for UDMA/100
>[68858.482462] Extended CMOS year: 2000
>[68858.516115] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[68858.673469] PM: restore of devices complete after 705.867 msecs
>[68858.673636] PM: Image restored successfully.
>[68858.673637] Restarting tasks ... done.
>[68858.675408] PM: Basic memory bitmaps freed
>[68858.675532] video LNXVIDEO:00: Restoring backlight state
>[68858.916427] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[68858.920042] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[68858.962763] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[68858.973778] r8169 0000:14:00.0: p3p1: link down
>[68858.973863] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[68863.666436] wlan0: authenticate with 00:3a:98:22:83:fd
>[68863.676552] wlan0: send auth to 00:3a:98:22:83:fd (try 1/3)
>[68863.679444] wlan0: authenticated
>[68863.680315] wlan0: associate with 00:3a:98:22:83:fd (try 1/3)
>[68863.685575] wlan0: RX AssocResp from 00:3a:98:22:83:fd (capab=0x111 status=0 aid=10)
>[68863.689286] wlan0: associated
>[68863.689313] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[68863.689362] cfg80211: Calling CRDA for country: SE
>[68863.769553] cfg80211: Regulatory domain changed to country: SE
>[68863.769557] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[68863.769559] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68863.769560] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68863.769562] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[68863.769563] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[68929.845871] wlan0: authenticate with 00:3a:98:22:83:f2
>[68929.848623] wlan0: send auth to 00:3a:98:22:83:f2 (try 1/3)
>[68929.855481] wlan0: authenticated
>[68929.856029] wlan0: associate with 00:3a:98:22:83:f2 (try 1/3)
>[68929.861210] wlan0: RX AssocResp from 00:3a:98:22:83:f2 (capab=0x431 status=0 aid=128)
>[68929.866800] wlan0: associated
>[68975.940247] wlan0: authenticate with 00:3a:98:22:83:fd
>[68975.943458] wlan0: send auth to 00:3a:98:22:83:fd (try 1/3)
>[68975.960045] wlan0: authenticated
>[68975.961035] wlan0: associate with 00:3a:98:22:83:fd (try 1/3)
>[68975.963373] wlan0: RX AssocResp from 00:3a:98:22:83:fd (capab=0x111 status=0 aid=10)
>[68975.966356] wlan0: associated
>[69057.592157] wlan0: authenticate with 00:3a:98:22:83:f2
>[69057.595848] wlan0: send auth to 00:3a:98:22:83:f2 (try 1/3)
>[69057.796053] wlan0: send auth to 00:3a:98:22:83:f2 (try 2/3)
>[69057.799026] wlan0: authenticated
>[69057.800054] wlan0: associate with 00:3a:98:22:83:f2 (try 1/3)
>[69057.803257] wlan0: RX AssocResp from 00:3a:98:22:83:f2 (capab=0x431 status=0 aid=129)
>[69057.808088] wlan0: associated
>[69074.419793] wlan0: authenticate with 00:3a:98:22:83:fd
>[69074.422820] wlan0: send auth to 00:3a:98:22:83:fd (try 1/3)
>[69074.623029] wlan0: send auth to 00:3a:98:22:83:fd (try 2/3)
>[69074.623874] wlan0: authenticated
>[69074.625037] wlan0: associate with 00:3a:98:22:83:fd (try 1/3)
>[69074.627267] wlan0: RX AssocResp from 00:3a:98:22:83:fd (capab=0x111 status=0 aid=12)
>[69074.630100] wlan0: associated
>[69195.569992] wlan0: authenticate with 00:3a:98:22:83:f2
>[69195.573302] wlan0: send auth to 00:3a:98:22:83:f2 (try 1/3)
>[69195.774054] wlan0: send auth to 00:3a:98:22:83:f2 (try 2/3)
>[69195.775234] wlan0: authenticated
>[69195.776054] wlan0: associate with 00:3a:98:22:83:f2 (try 1/3)
>[69195.779027] wlan0: RX AssocResp from 00:3a:98:22:83:f2 (capab=0x431 status=0 aid=129)
>[69195.783151] wlan0: associated
>[69265.922085] wlan0: authenticate with 00:3a:98:22:83:fd
>[69265.925329] wlan0: send auth to 00:3a:98:22:83:fd (try 1/3)
>[69265.927702] wlan0: authenticated
>[69265.929037] wlan0: associate with 00:3a:98:22:83:fd (try 1/3)
>[69265.931333] wlan0: RX AssocResp from 00:3a:98:22:83:fd (capab=0x111 status=0 aid=12)
>[69265.935158] wlan0: associated
>[69282.736000] wlan0: authenticate with 00:3a:98:22:83:f2
>[69282.739305] wlan0: send auth to 00:3a:98:22:83:f2 (try 1/3)
>[69282.741149] wlan0: authenticated
>[69282.742041] wlan0: associate with 00:3a:98:22:83:f2 (try 1/3)
>[69282.744905] wlan0: RX AssocResp from 00:3a:98:22:83:f2 (capab=0x431 status=0 aid=134)
>[69282.747861] wlan0: associated
>[69348.743598] wlan0: authenticate with e8:04:62:0b:4b:1f
>[69348.746456] wlan0: send auth to e8:04:62:0b:4b:1f (try 1/3)
>[69348.947028] wlan0: send auth to e8:04:62:0b:4b:1f (try 2/3)
>[69348.947745] wlan0: authenticated
>[69348.949026] wlan0: associate with e8:04:62:0b:4b:1f (try 1/3)
>[69348.953264] wlan0: RX AssocResp from e8:04:62:0b:4b:1f (capab=0x111 status=0 aid=4)
>[69348.957773] wlan0: associated
>[69585.205491] device vboxnet0 entered promiscuous mode
>[69591.098429] device p3p1 entered promiscuous mode
>[69833.834053] wlan0: authenticate with e8:04:62:0b:4b:10
>[69833.837254] wlan0: send auth to e8:04:62:0b:4b:10 (try 1/3)
>[69833.838374] wlan0: authenticated
>[69833.842021] wlan0: associate with e8:04:62:0b:4b:10 (try 1/3)
>[69833.845003] wlan0: RX AssocResp from e8:04:62:0b:4b:10 (capab=0x431 status=0 aid=14)
>[69833.856804] wlan0: associated
>[70138.530101] wlan0: authenticate with e8:04:62:0b:4b:1f
>[70138.532833] wlan0: send auth to e8:04:62:0b:4b:1f (try 1/3)
>[70138.733017] wlan0: send auth to e8:04:62:0b:4b:1f (try 2/3)
>[70138.733940] wlan0: authenticated
>[70138.734231] wlan0: waiting for beacon from e8:04:62:0b:4b:1f
>[70138.815015] wlan0: associate with e8:04:62:0b:4b:1f (try 1/3)
>[70138.816824] wlan0: RX AssocResp from e8:04:62:0b:4b:1f (capab=0x111 status=0 aid=1)
>[70138.818417] wlan0: associated
>[70669.118310] wlan0: authenticate with e8:04:62:0b:4b:10
>[70669.121340] wlan0: send auth to e8:04:62:0b:4b:10 (try 1/3)
>[70669.122510] wlan0: authenticated
>[70669.124051] wlan0: associate with e8:04:62:0b:4b:10 (try 1/3)
>[70669.126732] wlan0: RX AssocResp from e8:04:62:0b:4b:10 (capab=0x431 status=0 aid=86)
>[70669.128757] wlan0: associated
>[71136.133043] device p3p1 left promiscuous mode
>[71145.975155] vboxnetflt: dropped 0 out of 0 packets
>[71145.980109] vboxnetflt: dropped 0 out of 12239 packets
>[71150.984608] device vboxnet0 left promiscuous mode
>[71150.990283] vboxnetflt: dropped 15661 out of 15879 packets
>[71281.798807] wlan0: deauthenticating from e8:04:62:0b:4b:10 by local choice (reason=3)
>[71281.830286] cfg80211: Calling CRDA to update world regulatory domain
>[71281.839891] cfg80211: World regulatory domain updated:
>[71281.839895] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71281.839897] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71281.839898] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71281.839900] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71281.839902] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71281.839903] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71281.839918] cfg80211: Calling CRDA for country: SE
>[71281.842188] cfg80211: Regulatory domain changed to country: SE
>[71281.842191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71281.842193] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71281.842194] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71281.842196] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71281.842198] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71283.610354] PM: Syncing filesystems ... done.
>[71283.628740] PM: Preparing system for mem sleep
>[71283.628756] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[71283.640233] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[71283.651101] PM: Entering mem sleep
>[71283.651153] Suspending console(s) (use no_console_suspend to debug)
>[71283.651727] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[71283.755800] <6>[fglrx] IRQ 49 Disabled
>[71283.755845] <6>[fglrx] Preparing suspend fglrx in kernel.
>[71283.755851] kworker/u:11: page allocation failure: order:10, mode:0x4020
>[71283.755853] Pid: 1919, comm: kworker/u:11 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[71283.755854] Call Trace:
>[71283.755861]  [<ffffffff8113029b>] warn_alloc_failed+0xeb/0x150
>[71283.755865]  [<ffffffff812d8d43>] ? cpumask_next_and+0x23/0x40
>[71283.755868]  [<ffffffff810979f3>] ? update_sd_lb_stats+0x133/0x600
>[71283.755870]  [<ffffffff81134126>] __alloc_pages_nodemask+0x736/0x990
>[71283.755924]  [<ffffffffa0448700>] ? firegl_trace+0x50/0x1e0 [fglrx]
>[71283.755927]  [<ffffffff8116fff0>] alloc_pages_current+0xb0/0x120
>[71283.755929]  [<ffffffff8112f1ba>] __get_free_pages+0x2a/0x80
>[71283.755931]  [<ffffffff811775e9>] kmalloc_order_trace+0x39/0xb0
>[71283.755932]  [<ffffffff81179d4a>] __kmalloc+0x16a/0x1a0
>[71283.755954]  [<ffffffffa041898c>] KCL_MEM_SmallBufferAllocAtomic+0x1c/0x30 [fglrx]
>[71283.755979]  [<ffffffffa042c313>] firegl_save_fb+0x233/0x360 [fglrx]
>[71283.755981]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[71283.756007]  [<ffffffffa042b304>] ? firegl_pm_save_framebuffer+0x204/0x300 [fglrx]
>[71283.756054]  [<ffffffffa042e0cd>] ? firegl_cail_powerdown+0x8d/0x240 [fglrx]
>[71283.756079]  [<ffffffffa042c092>] ? libip_suspend+0x22/0x50 [fglrx]
>[71283.756099]  [<ffffffffa0415f87>] ? fglrx_pci_suspend+0x87/0x150 [fglrx]
>[71283.756102]  [<ffffffff813017a6>] ? pci_legacy_suspend+0x46/0xe0
>[71283.756103]  [<ffffffff8130230d>] ? pci_pm_suspend+0xfd/0x140
>[71283.756107]  [<ffffffff813cc31a>] ? __pm_runtime_barrier+0x1a/0x140
>[71283.756108]  [<ffffffff81302210>] ? pci_pm_poweroff+0xe0/0xe0
>[71283.756110]  [<ffffffff813c9238>] ? dpm_run_callback+0x58/0x90
>[71283.756111]  [<ffffffff813c9c1f>] ? __device_suspend+0xef/0x2b0
>[71283.756113]  [<ffffffff813c9dff>] ? async_suspend+0x1f/0xa0
>[71283.756115]  [<ffffffff81086a18>] ? async_run_entry_fn+0x88/0x190
>[71283.756117]  [<ffffffff81077cb7>] ? process_one_work+0x147/0x4a0
>[71283.756119]  [<ffffffff81076642>] ? need_to_create_worker+0x12/0x30
>[71283.756120]  [<ffffffff81086990>] ? __lowest_in_progress+0x50/0x50
>[71283.756122]  [<ffffffff81079a1e>] ? worker_thread+0x15e/0x480
>[71283.756124]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[71283.756125]  [<ffffffff8107ede3>] ? kthread+0x93/0xa0
>[71283.756128]  [<ffffffff816269c4>] ? kernel_thread_helper+0x4/0x10
>[71283.756130]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[71283.756131]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[71283.756132] Mem-Info:
>[71283.756133] Node 0 DMA per-cpu:
>[71283.756134] CPU    0: hi:    0, btch:   1 usd:   0
>[71283.756135] CPU    1: hi:    0, btch:   1 usd:   0
>[71283.756136] Node 0 DMA32 per-cpu:
>[71283.756137] CPU    0: hi:  186, btch:  31 usd: 166
>[71283.756138] CPU    1: hi:  186, btch:  31 usd: 161
>[71283.756139] Node 0 Normal per-cpu:
>[71283.756139] CPU    0: hi:  186, btch:  31 usd: 124
>[71283.756140] CPU    1: hi:  186, btch:  31 usd: 126
>[71283.756143] active_anon:70534 inactive_anon:21640 isolated_anon:0
>[71283.756143]  active_file:96318 inactive_file:175885 isolated_file:0
>[71283.756143]  unevictable:0 dirty:5 writeback:0 unstable:0
>[71283.756143]  free:541335 slab_reclaimable:35480 slab_unreclaimable:11971
>[71283.756143]  mapped:32454 shmem:2935 pagetables:6599 bounce:0
>[71283.756148] Node 0 DMA free:15892kB min:256kB low:320kB high:384kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>[71283.756150] lowmem_reserve[]: 0 2957 3965 3965
>[71283.756154] Node 0 DMA32 free:2079024kB min:50208kB low:62760kB high:75312kB active_anon:224916kB inactive_anon:26100kB active_file:129708kB inactive_file:411012kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3028412kB mlocked:0kB dirty:0kB writeback:0kB mapped:28408kB shmem:5468kB slab_reclaimable:101568kB slab_unreclaimable:10556kB kernel_stack:272kB pagetables:2340kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[71283.756156] lowmem_reserve[]: 0 0 1008 1008
>[71283.756160] Node 0 Normal free:70424kB min:17112kB low:21388kB high:25668kB active_anon:57220kB inactive_anon:60460kB active_file:255564kB inactive_file:292528kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:1032192kB mlocked:0kB dirty:24kB writeback:0kB mapped:101408kB shmem:6272kB slab_reclaimable:40352kB slab_unreclaimable:37320kB kernel_stack:2456kB pagetables:24056kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[71283.756162] lowmem_reserve[]: 0 0 0 0
>[71283.756167] Node 0 DMA: 1*4kB 0*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15892kB
>[71283.756171] Node 0 DMA32: 11512*4kB 10415*8kB 8016*16kB 6631*32kB 4142*64kB 2887*128kB 1661*256kB 723*512kB 167*1024kB 2*2048kB 1*4096kB = 2079032kB
>[71283.756175] Node 0 Normal: 5022*4kB 2600*8kB 908*16kB 271*32kB 36*64kB 3*128kB 2*256kB 2*512kB 0*1024kB 1*2048kB 0*4096kB = 70360kB
>[71283.756176] 280105 total pagecache pages
>[71283.756177] 4966 pages in swap cache
>[71283.756178] Swap cache stats: add 43930, delete 38964, find 26035/26268
>[71283.756178] Free swap  = 6036316kB
>[71283.756179] Total swap = 6127612kB
>[71283.770825] 1048560 pages RAM
>[71283.770825] 68677 pages reserved
>[71283.770826] 258522 pages shared
>[71283.770826] 237336 pages non-shared
>[71283.857665] sd 0:0:0:0: [sda] Stopping disk
>[71284.135918] <6>[fglrx] Suspending fglrx in kernel completed.
>[71284.135920] <6>[fglrx] Power down the ASIC .
>[71284.868143] PM: suspend of devices complete after 1216.760 msecs
>[71284.868364] PM: late suspend of devices complete after 0.218 msecs
>[71284.868610] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[71284.912129] PM: noirq suspend of devices complete after 43.762 msecs
>[71284.912617] ACPI: Preparing to enter system sleep state S3
>[71284.912781] PM: Saving platform NVS memory
>[71284.913746] Disabling non-boot CPUs ...
>[71284.915048] smpboot: CPU 1 is now offline
>[71284.915601] Extended CMOS year: 2000
>[71284.915601] ACPI: Low-level resume complete
>[71284.915601] PM: Restoring platform NVS memory
>[71284.915601] Extended CMOS year: 2000
>[71284.915601] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[71284.920890] Enabling non-boot CPUs ...
>[71284.921022] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[71284.935937] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[71284.940737] CPU1 is up
>[71284.942590] ACPI: Waking up from system sleep state S3
>[71284.942863] ------------[ cut here ]------------
>[71284.942869] WARNING: at kernel/irq/manage.c:1211 __free_irq+0xa3/0x220()
>[71284.942869] Hardware name:         
>[71284.942870] Trying to free already-free IRQ 16
>[71284.942905] Modules linked in: nfnetlink_log nfnetlink fuse vboxpci(O) vboxnetadp(O) vboxnetflt(O) bnep bluetooth vboxdrv(O) ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media ir_lirc_codec lirc_dev coretemp snd_hda_codec_hdmi ir_mce_kbd_decoder arc4 snd_hda_codec_realtek ir_sanyo_decoder iwldvm kvm_intel snd_hda_intel ir_sony_decoder mac80211 iTCO_wdt ir_jvc_decoder fglrx(PO) kvm r8169 snd_hda_codec compal_laptop iTCO_vendor_support ir_rc6_decoder iwlwifi snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer ir_rc5_decoder jmb38x_ms mii snd soundcore microcode cfg80211 ir_nec_decoder lpc_ich i2c_i801 memstick mfd_core rfkill rc_rc6_mce ene_ir rc_core amd_iommu_v2 binfmt_misc uinput sdhci_pci sdhci mmc_core video radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core
>[71284.942915] Pid: 28846, comm: kworker/0:0 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[71284.942916] Call Trace:
>[71284.942921]  [<ffffffff8105b8ef>] warn_slowpath_common+0x7f/0xc0
>[71284.942923]  [<ffffffff8105b9e6>] warn_slowpath_fmt+0x46/0x50
>[71284.942924]  [<ffffffff810e7ca3>] __free_irq+0xa3/0x220
>[71284.942926]  [<ffffffff810e7e74>] free_irq+0x54/0xc0
>[71284.942932]  [<ffffffffa01a4300>] sdhci_remove_host+0x60/0x160 [sdhci]
>[71284.942936]  [<ffffffffa0199c92>] sdhci_pci_remove_slot+0x3e/0x8b [sdhci_pci]
>[71284.942939]  [<ffffffffa0199d2d>] sdhci_pci_remove+0x4e/0x78 [sdhci_pci]
>[71284.942943]  [<ffffffff8130318f>] pci_device_remove+0x3f/0x110
>[71284.942947]  [<ffffffff813c185c>] __device_release_driver+0x7c/0xe0
>[71284.942949]  [<ffffffff813c1b9c>] device_release_driver+0x2c/0x40
>[71284.942951]  [<ffffffff813c12fe>] bus_remove_device+0xee/0x160
>[71284.942952]  [<ffffffff813be71a>] device_del+0x12a/0x1c0
>[71284.942954]  [<ffffffff813be7d2>] device_unregister+0x22/0x60
>[71284.942956]  [<ffffffff812fc6f4>] pci_stop_bus_device+0x94/0xa0
>[71284.942959]  [<ffffffff813150a5>] acpiphp_disable_slot+0x195/0x200
>[71284.942961]  [<ffffffff81313b82>] ? get_slot_status+0x92/0xc0
>[71284.942963]  [<ffffffff8131513d>] acpiphp_check_bridge.isra.16+0x2d/0xf0
>[71284.942964]  [<ffffffff813157fb>] _handle_hotplug_event_bridge+0x36b/0x4d0
>[71284.942966]  [<ffffffff81315490>] ? _handle_hotplug_event_func+0x1d0/0x1d0
>[71284.942969]  [<ffffffff8107a41f>] ? queue_work+0x1f/0x30
>[71284.942971]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[71284.942974]  [<ffffffff813384df>] ? acpi_os_release_object+0xe/0x12
>[71284.942975]  [<ffffffff81077cb7>] process_one_work+0x147/0x4a0
>[71284.942977]  [<ffffffff81315490>] ? _handle_hotplug_event_func+0x1d0/0x1d0
>[71284.942979]  [<ffffffff81079a1e>] worker_thread+0x15e/0x480
>[71284.942981]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[71284.942983]  [<ffffffff8107ede3>] kthread+0x93/0xa0
>[71284.942985]  [<ffffffff816269c4>] kernel_thread_helper+0x4/0x10
>[71284.942987]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[71284.942988]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[71284.942989] ---[ end trace bcf49c0bc5942daa ]---
>[71285.031246] PM: noirq resume of devices complete after 88.026 msecs
>[71285.031411] PM: early resume of devices complete after 0.052 msecs
>[71285.031438] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[71285.031462] usb usb3: root hub lost power or was reset
>[71285.031464] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[71285.031477] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[71285.031490] usb usb4: root hub lost power or was reset
>[71285.031507] usb usb5: root hub lost power or was reset
>[71285.031508] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[71285.031535] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[71285.031561] usb usb6: root hub lost power or was reset
>[71285.031573] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[71285.031576] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[71285.031600] usb usb7: root hub lost power or was reset
>[71285.031610] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[71285.031632] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[71285.031634] usb usb8: root hub lost power or was reset
>[71285.031645] pci 0000:00:1e.0: setting latency timer to 64
>[71285.031657] ata_piix 0000:00:1f.2: setting latency timer to 64
>[71285.031659] ata_piix 0000:00:1f.5: setting latency timer to 64
>[71285.031762] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[71285.031838] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[71285.034216] <6>[fglrx] Power up the ASIC
>[71285.034228] <6>[fglrx] Preparing resume fglrx in kernel.
>[71285.059299] <6>[fglrx] Resuming fglrx in kernel completed.
>[71285.059410] <6>[fglrx] IRQ 49 Enabled
>[71285.258058] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[71285.351043] ata4: SATA link down (SStatus 0 SControl 300)
>[71285.362039] ata3: SATA link down (SStatus 0 SControl 300)
>[71285.474115] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[71285.491121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[71285.589246] ata2.00: configured for UDMA/100
>[71289.622136] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[71289.875814] ata1.00: configured for UDMA/133
>[71289.875869] sd 0:0:0:0: [sda] Starting disk
>[71289.885286] Extended CMOS year: 2000
>[71289.906514] PM: resume of devices complete after 4875.099 msecs
>[71289.906692] PM: Finishing wakeup.
>[71289.906693] Restarting tasks ... done.
>[71289.985360] video LNXVIDEO:00: Restoring backlight state
>[71290.124820] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[71290.128280] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[71290.176522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[71290.184333] r8169 0000:14:00.0: p3p1: link down
>[71290.184433] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[71294.937074] wlan0: authenticate with e8:04:62:0b:4b:10
>[71294.944824] wlan0: send auth to e8:04:62:0b:4b:10 (try 1/3)
>[71294.947040] wlan0: authenticated
>[71294.948070] wlan0: associate with e8:04:62:0b:4b:10 (try 1/3)
>[71295.149049] wlan0: associate with e8:04:62:0b:4b:10 (try 2/3)
>[71295.160207] wlan0: RX AssocResp from e8:04:62:0b:4b:10 (capab=0x431 status=0 aid=96)
>[71295.162601] wlan0: associated
>[71295.162676] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[71295.162814] cfg80211: Calling CRDA for country: SE
>[71295.169218] cfg80211: Regulatory domain changed to country: SE
>[71295.169222] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71295.169223] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71295.169225] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71295.169227] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71295.169228] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71593.854061] wlan0: deauthenticating from e8:04:62:0b:4b:10 by local choice (reason=3)
>[71593.960483] cfg80211: Calling CRDA to update world regulatory domain
>[71593.988827] cfg80211: World regulatory domain updated:
>[71593.988831] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71593.988833] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71593.988834] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71593.988836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71593.988838] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71593.988839] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71593.988854] cfg80211: Calling CRDA for country: SE
>[71593.992672] cfg80211: Regulatory domain changed to country: SE
>[71593.992675] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71593.992677] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71593.992679] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71593.992680] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71593.992682] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71595.395284] PM: Syncing filesystems ... done.
>[71595.413331] PM: Preparing system for mem sleep
>[71595.413345] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[71595.424147] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[71595.435168] PM: Entering mem sleep
>[71595.435222] Suspending console(s) (use no_console_suspend to debug)
>[71595.435553] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[71595.538642] <6>[fglrx] IRQ 49 Disabled
>[71595.538688] <6>[fglrx] Preparing suspend fglrx in kernel.
>[71595.538695] kworker/u:9: page allocation failure: order:10, mode:0x4020
>[71595.538696] Pid: 4264, comm: kworker/u:9 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[71595.538697] Call Trace:
>[71595.538704]  [<ffffffff8113029b>] warn_alloc_failed+0xeb/0x150
>[71595.538708]  [<ffffffff812d8d43>] ? cpumask_next_and+0x23/0x40
>[71595.538711]  [<ffffffff810979f3>] ? update_sd_lb_stats+0x133/0x600
>[71595.538712]  [<ffffffff81134126>] __alloc_pages_nodemask+0x736/0x990
>[71595.538778]  [<ffffffffa0448700>] ? firegl_trace+0x50/0x1e0 [fglrx]
>[71595.538781]  [<ffffffff8116fff0>] alloc_pages_current+0xb0/0x120
>[71595.538782]  [<ffffffff8112f1ba>] __get_free_pages+0x2a/0x80
>[71595.538784]  [<ffffffff811775e9>] kmalloc_order_trace+0x39/0xb0
>[71595.538786]  [<ffffffff81179d4a>] __kmalloc+0x16a/0x1a0
>[71595.538806]  [<ffffffffa041898c>] KCL_MEM_SmallBufferAllocAtomic+0x1c/0x30 [fglrx]
>[71595.538830]  [<ffffffffa042c313>] firegl_save_fb+0x233/0x360 [fglrx]
>[71595.538833]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[71595.538857]  [<ffffffffa042b304>] ? firegl_pm_save_framebuffer+0x204/0x300 [fglrx]
>[71595.538882]  [<ffffffffa042e0cd>] ? firegl_cail_powerdown+0x8d/0x240 [fglrx]
>[71595.538906]  [<ffffffffa042c092>] ? libip_suspend+0x22/0x50 [fglrx]
>[71595.538925]  [<ffffffffa0415f87>] ? fglrx_pci_suspend+0x87/0x150 [fglrx]
>[71595.538928]  [<ffffffff813017a6>] ? pci_legacy_suspend+0x46/0xe0
>[71595.538929]  [<ffffffff8130230d>] ? pci_pm_suspend+0xfd/0x140
>[71595.538932]  [<ffffffff813cc31a>] ? __pm_runtime_barrier+0x1a/0x140
>[71595.538934]  [<ffffffff81302210>] ? pci_pm_poweroff+0xe0/0xe0
>[71595.538935]  [<ffffffff813c9238>] ? dpm_run_callback+0x58/0x90
>[71595.538937]  [<ffffffff813c9c1f>] ? __device_suspend+0xef/0x2b0
>[71595.538938]  [<ffffffff813c9dff>] ? async_suspend+0x1f/0xa0
>[71595.538940]  [<ffffffff81086a18>] ? async_run_entry_fn+0x88/0x190
>[71595.538943]  [<ffffffff81077cb7>] ? process_one_work+0x147/0x4a0
>[71595.538944]  [<ffffffff81076642>] ? need_to_create_worker+0x12/0x30
>[71595.538945]  [<ffffffff81086990>] ? __lowest_in_progress+0x50/0x50
>[71595.538947]  [<ffffffff81079a1e>] ? worker_thread+0x15e/0x480
>[71595.538949]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[71595.538950]  [<ffffffff8107ede3>] ? kthread+0x93/0xa0
>[71595.538953]  [<ffffffff816269c4>] ? kernel_thread_helper+0x4/0x10
>[71595.538954]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[71595.538956]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[71595.538956] Mem-Info:
>[71595.538958] Node 0 DMA per-cpu:
>[71595.538959] CPU    0: hi:    0, btch:   1 usd:   0
>[71595.538960] CPU    1: hi:    0, btch:   1 usd:   0
>[71595.538961] Node 0 DMA32 per-cpu:
>[71595.538961] CPU    0: hi:  186, btch:  31 usd: 176
>[71595.538962] CPU    1: hi:  186, btch:  31 usd: 185
>[71595.538963] Node 0 Normal per-cpu:
>[71595.538964] CPU    0: hi:  186, btch:  31 usd: 180
>[71595.538965] CPU    1: hi:  186, btch:  31 usd: 119
>[71595.538968] active_anon:61992 inactive_anon:29511 isolated_anon:0
>[71595.538968]  active_file:98857 inactive_file:168827 isolated_file:0
>[71595.538968]  unevictable:0 dirty:0 writeback:0 unstable:0
>[71595.538968]  free:545459 slab_reclaimable:35302 slab_unreclaimable:11942
>[71595.538968]  mapped:31739 shmem:2984 pagetables:6486 bounce:0
>[71595.538972] Node 0 DMA free:15892kB min:256kB low:320kB high:384kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>[71595.538974] lowmem_reserve[]: 0 2957 3965 3965
>[71595.538978] Node 0 DMA32 free:2070084kB min:50208kB low:62760kB high:75312kB active_anon:223140kB inactive_anon:26096kB active_file:130880kB inactive_file:413048kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3028412kB mlocked:0kB dirty:0kB writeback:0kB mapped:27732kB shmem:5484kB slab_reclaimable:101464kB slab_unreclaimable:10568kB kernel_stack:248kB pagetables:2340kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[71595.538979] lowmem_reserve[]: 0 0 1008 1008
>[71595.538984] Node 0 Normal free:95860kB min:17112kB low:21388kB high:25668kB active_anon:24828kB inactive_anon:91948kB active_file:264548kB inactive_file:262260kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:1032192kB mlocked:0kB dirty:0kB writeback:0kB mapped:99224kB shmem:6452kB slab_reclaimable:39744kB slab_unreclaimable:37192kB kernel_stack:2408kB pagetables:23604kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[71595.538985] lowmem_reserve[]: 0 0 0 0
>[71595.538990] Node 0 DMA: 1*4kB 0*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15892kB
>[71595.538994] Node 0 DMA32: 10121*4kB 11202*8kB 8579*16kB 7077*32kB 4443*64kB 3065*128kB 1704*256kB 709*512kB 78*1024kB 8*2048kB 1*4096kB = 2070084kB
>[71595.538998] Node 0 Normal: 7695*4kB 3211*8kB 989*16kB 302*32kB 45*64kB 22*128kB 12*256kB 2*512kB 0*1024kB 2*2048kB 0*4096kB = 95844kB
>[71595.538998] 275690 total pagecache pages
>[71595.538999] 5039 pages in swap cache
>[71595.539000] Swap cache stats: add 44018, delete 38979, find 26717/26962
>[71595.539010] Free swap  = 6036376kB
>[71595.539010] Total swap = 6127612kB
>[71595.553788] 1048560 pages RAM
>[71595.553789] 69961 pages reserved
>[71595.553789] 254439 pages shared
>[71595.553789] 235380 pages non-shared
>[71595.572713] sd 0:0:0:0: [sda] Stopping disk
>[71595.917555] <6>[fglrx] Suspending fglrx in kernel completed.
>[71595.917556] <6>[fglrx] Power down the ASIC .
>[71596.583186] PM: suspend of devices complete after 1147.742 msecs
>[71596.583393] PM: late suspend of devices complete after 0.203 msecs
>[71596.583587] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[71596.627131] PM: noirq suspend of devices complete after 43.736 msecs
>[71596.627621] ACPI: Preparing to enter system sleep state S3
>[71596.627788] PM: Saving platform NVS memory
>[71596.628739] Disabling non-boot CPUs ...
>[71596.630038] smpboot: CPU 1 is now offline
>[71596.630641] Extended CMOS year: 2000
>[71596.630641] ACPI: Low-level resume complete
>[71596.630641] PM: Restoring platform NVS memory
>[71596.630641] Extended CMOS year: 2000
>[71596.630641] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[71596.635932] Enabling non-boot CPUs ...
>[71596.636028] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[71596.650913] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[71596.655720] CPU1 is up
>[71596.657591] ACPI: Waking up from system sleep state S3
>[71596.745252] PM: noirq resume of devices complete after 87.432 msecs
>[71596.745337] PM: early resume of devices complete after 0.052 msecs
>[71596.745395] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[71596.745419] usb usb3: root hub lost power or was reset
>[71596.745432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[71596.745456] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[71596.745457] usb usb4: root hub lost power or was reset
>[71596.745470] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[71596.745482] usb usb5: root hub lost power or was reset
>[71596.745501] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[71596.745533] usb usb6: root hub lost power or was reset
>[71596.745547] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[71596.745581] usb usb7: root hub lost power or was reset
>[71596.745593] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[71596.745626] usb usb8: root hub lost power or was reset
>[71596.745642] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[71596.745666] pci 0000:00:1e.0: setting latency timer to 64
>[71596.745677] ata_piix 0000:00:1f.2: setting latency timer to 64
>[71596.745687] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[71596.745689] ata_piix 0000:00:1f.5: setting latency timer to 64
>[71596.745833] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[71596.745916] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[71596.748227] <6>[fglrx] Power up the ASIC
>[71596.748238] <6>[fglrx] Preparing resume fglrx in kernel.
>[71596.773237] <6>[fglrx] Resuming fglrx in kernel completed.
>[71596.773343] <6>[fglrx] IRQ 49 Enabled
>[71596.972111] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[71597.065035] ata4: SATA link down (SStatus 0 SControl 300)
>[71597.076016] ata3: SATA link down (SStatus 0 SControl 300)
>[71597.188121] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[71597.205101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[71597.281257] ata2.00: configured for UDMA/100
>[71601.387142] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[71601.396809] ata1.00: configured for UDMA/133
>[71601.396866] sd 0:0:0:0: [sda] Starting disk
>[71601.408316] Extended CMOS year: 2000
>[71601.425176] PM: resume of devices complete after 4679.835 msecs
>[71601.425342] PM: Finishing wakeup.
>[71601.425343] Restarting tasks ... done.
>[71601.508330] video LNXVIDEO:00: Restoring backlight state
>[71601.637622] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[71601.645421] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[71601.701192] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[71601.709090] r8169 0000:14:00.0: p3p1: link down
>[71601.709195] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[71606.655053] wlan0: authenticate with e8:04:62:0b:4b:1f
>[71606.663640] wlan0: send auth to e8:04:62:0b:4b:1f (try 1/3)
>[71606.664380] wlan0: authenticated
>[71606.665033] wlan0: associate with e8:04:62:0b:4b:1f (try 1/3)
>[71606.669838] wlan0: RX AssocResp from e8:04:62:0b:4b:1f (capab=0x111 status=0 aid=11)
>[71606.671607] wlan0: associated
>[71606.671636] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[71606.671688] cfg80211: Calling CRDA for country: SE
>[71606.676261] cfg80211: Regulatory domain changed to country: SE
>[71606.676264] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71606.676266] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71606.676268] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71606.676270] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71606.676271] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71881.859202] wlan0: deauthenticating from e8:04:62:0b:4b:1f by local choice (reason=3)
>[71881.886443] cfg80211: Calling CRDA to update world regulatory domain
>[71881.899330] cfg80211: World regulatory domain updated:
>[71881.899333] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71881.899335] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71881.899337] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71881.899339] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[71881.899341] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71881.899342] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[71881.899359] cfg80211: Calling CRDA for country: SE
>[71881.901934] cfg80211: Regulatory domain changed to country: SE
>[71881.901938] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71881.901940] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71881.901941] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71881.901943] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71881.901945] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71883.265793] PM: Syncing filesystems ... done.
>[71883.283896] PM: Preparing system for mem sleep
>[71883.283910] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[71883.295147] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[71883.306169] PM: Entering mem sleep
>[71883.306220] Suspending console(s) (use no_console_suspend to debug)
>[71883.306553] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[71883.409708] <6>[fglrx] IRQ 49 Disabled
>[71883.409746] <6>[fglrx] Preparing suspend fglrx in kernel.
>[71883.420383] sd 0:0:0:0: [sda] Stopping disk
>[71883.774512] <6>[fglrx] Suspending fglrx in kernel completed.
>[71883.774514] <6>[fglrx] Power down the ASIC .
>[71884.431159] PM: suspend of devices complete after 1124.713 msecs
>[71884.431370] PM: late suspend of devices complete after 0.208 msecs
>[71884.431564] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[71884.475143] PM: noirq suspend of devices complete after 43.769 msecs
>[71884.475640] ACPI: Preparing to enter system sleep state S3
>[71884.475804] PM: Saving platform NVS memory
>[71884.476759] Disabling non-boot CPUs ...
>[71884.478061] smpboot: CPU 1 is now offline
>[71884.479134] Extended CMOS year: 2000
>[71884.479134] ACPI: Low-level resume complete
>[71884.479134] PM: Restoring platform NVS memory
>[71884.479134] Extended CMOS year: 2000
>[71884.479134] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[71884.484429] Enabling non-boot CPUs ...
>[71884.484517] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[71884.499599] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[71884.504416] CPU1 is up
>[71884.506271] ACPI: Waking up from system sleep state S3
>[71884.594267] PM: noirq resume of devices complete after 87.769 msecs
>[71884.594353] PM: early resume of devices complete after 0.052 msecs
>[71884.594412] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[71884.594436] usb usb3: root hub lost power or was reset
>[71884.594447] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[71884.594471] usb usb4: root hub lost power or was reset
>[71884.594474] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[71884.594486] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[71884.594499] usb usb5: root hub lost power or was reset
>[71884.594518] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[71884.594548] usb usb6: root hub lost power or was reset
>[71884.594561] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[71884.594593] usb usb7: root hub lost power or was reset
>[71884.594606] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[71884.594637] usb usb8: root hub lost power or was reset
>[71884.594654] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[71884.594685] pci 0000:00:1e.0: setting latency timer to 64
>[71884.594700] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[71884.594700] ata_piix 0000:00:1f.2: setting latency timer to 64
>[71884.594712] ata_piix 0000:00:1f.5: setting latency timer to 64
>[71884.594841] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[71884.594920] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[71884.597249] <6>[fglrx] Power up the ASIC
>[71884.597261] <6>[fglrx] Preparing resume fglrx in kernel.
>[71884.621782] <6>[fglrx] Resuming fglrx in kernel completed.
>[71884.621887] <6>[fglrx] IRQ 49 Enabled
>[71884.821111] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[71884.914074] ata3: SATA link down (SStatus 0 SControl 300)
>[71884.925095] ata4: SATA link down (SStatus 0 SControl 300)
>[71885.037160] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[71885.054140] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[71885.111436] ata2.00: configured for UDMA/100
>[71889.185232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[71889.195864] ata1.00: configured for UDMA/133
>[71889.195922] sd 0:0:0:0: [sda] Starting disk
>[71889.208586] Extended CMOS year: 2000
>[71889.225610] PM: resume of devices complete after 4631.253 msecs
>[71889.225766] PM: Finishing wakeup.
>[71889.225767] Restarting tasks ... done.
>[71889.290352] video LNXVIDEO:00: Restoring backlight state
>[71889.405061] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[71889.408386] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[71889.454778] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[71889.466474] r8169 0000:14:00.0: p3p1: link down
>[71889.467062] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[71894.318799] wlan0: authenticate with e8:04:62:0b:4b:1f
>[71894.321995] wlan0: send auth to e8:04:62:0b:4b:1f (try 1/3)
>[71894.322718] wlan0: authenticated
>[71894.324052] wlan0: associate with e8:04:62:0b:4b:1f (try 1/3)
>[71894.337585] wlan0: RX AssocResp from e8:04:62:0b:4b:1f (capab=0x111 status=0 aid=11)
>[71894.342204] wlan0: associated
>[71894.342238] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[71894.342289] cfg80211: Calling CRDA for country: SE
>[71894.346843] cfg80211: Regulatory domain changed to country: SE
>[71894.346846] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[71894.346848] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71894.346849] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71894.346851] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[71894.346852] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[71958.372488] wlan0: authenticate with e8:04:62:0b:4b:10
>[71958.376383] wlan0: send auth to e8:04:62:0b:4b:10 (try 1/3)
>[71958.378615] wlan0: authenticated
>[71958.380133] wlan0: associate with e8:04:62:0b:4b:10 (try 1/3)
>[71958.382833] wlan0: RX AssocResp from e8:04:62:0b:4b:10 (capab=0x431 status=0 aid=118)
>[71958.387207] wlan0: associated
>[72428.531396] device vboxnet0 entered promiscuous mode
>[72433.170080] device p3p1 entered promiscuous mode
>[74037.890353] wlan0: authenticate with e8:04:62:0b:4b:1f
>[74037.893442] wlan0: send auth to e8:04:62:0b:4b:1f (try 1/3)
>[74038.094041] wlan0: send auth to e8:04:62:0b:4b:1f (try 2/3)
>[74038.094743] wlan0: authenticated
>[74038.095187] wlan0: waiting for beacon from e8:04:62:0b:4b:1f
>[74038.175021] wlan0: associate with e8:04:62:0b:4b:1f (try 1/3)
>[74038.176916] wlan0: RX AssocResp from e8:04:62:0b:4b:1f (capab=0x111 status=0 aid=15)
>[74038.181563] wlan0: associated
>[75078.748126] wlan0: deauthenticating from e8:04:62:0b:4b:1f by local choice (reason=3)
>[75078.781269] cfg80211: Calling CRDA to update world regulatory domain
>[75078.823560] cfg80211: World regulatory domain updated:
>[75078.823564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75078.823568] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75078.823570] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[75078.823572] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[75078.823573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75078.823575] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75078.823590] cfg80211: Calling CRDA for country: SE
>[75078.827249] cfg80211: Regulatory domain changed to country: SE
>[75078.827253] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75078.827255] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75078.827257] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75078.827258] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75078.827260] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[75081.273778] wlan0: authenticate with e8:04:62:0b:4b:1e
>[75081.276200] wlan0: send auth to e8:04:62:0b:4b:1e (try 1/3)
>[75081.276996] wlan0: authenticated
>[75081.278039] wlan0: associate with e8:04:62:0b:4b:1e (try 1/3)
>[75081.479038] wlan0: associate with e8:04:62:0b:4b:1e (try 2/3)
>[75081.480349] wlan0: RX AssocResp from e8:04:62:0b:4b:1e (capab=0x101 status=12 aid=0)
>[75081.480361] wlan0: e8:04:62:0b:4b:1e denied association (code=12)
>[75081.487905] wlan0: deauthenticating from e8:04:62:0b:4b:1e by local choice (reason=3)
>[75081.862640] wlan0: authenticate with e8:04:62:0b:4b:11
>[75081.866435] wlan0: send auth to e8:04:62:0b:4b:11 (try 1/3)
>[75081.867985] wlan0: authenticated
>[75081.868698] wlan0: waiting for beacon from e8:04:62:0b:4b:11
>[75081.900029] wlan0: associate with e8:04:62:0b:4b:11 (try 1/3)
>[75081.902128] wlan0: RX AssocResp from e8:04:62:0b:4b:11 (capab=0x401 status=12 aid=0)
>[75081.902134] wlan0: e8:04:62:0b:4b:11 denied association (code=12)
>[75081.908493] wlan0: deauthenticating from e8:04:62:0b:4b:11 by local choice (reason=3)
>[75082.374236] wlan0: authenticate with e8:40:40:79:4a:ee
>[75082.377878] wlan0: send auth to e8:40:40:79:4a:ee (try 1/3)
>[75082.578029] wlan0: send auth to e8:40:40:79:4a:ee (try 2/3)
>[75082.578788] wlan0: authenticated
>[75082.580030] wlan0: associate with e8:40:40:79:4a:ee (try 1/3)
>[75082.584948] wlan0: RX AssocResp from e8:40:40:79:4a:ee (capab=0x101 status=0 aid=4)
>[75082.587422] wlan0: associated
>[75082.587543] cfg80211: Calling CRDA for country: SE
>[75082.604786] cfg80211: Regulatory domain changed to country: SE
>[75082.604790] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75082.604792] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75082.604794] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75082.604796] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75082.604797] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[75256.186027] wlan0: authenticate with 00:26:cb:aa:1f:71
>[75256.188817] wlan0: send auth to 00:26:cb:aa:1f:71 (try 1/3)
>[75256.389029] wlan0: send auth to 00:26:cb:aa:1f:71 (try 2/3)
>[75256.390220] wlan0: authenticated
>[75256.390639] wlan0: waiting for beacon from 00:26:cb:aa:1f:71
>[75256.993546] wlan0: authenticate with e8:40:40:79:4a:ee
>[75256.999317] wlan0: send auth to e8:40:40:79:4a:ee (try 1/3)
>[75257.200076] wlan0: send auth to e8:40:40:79:4a:ee (try 2/3)
>[75257.201338] wlan0: authenticated
>[75257.202041] wlan0: associate with e8:40:40:79:4a:ee (try 1/3)
>[75257.205565] wlan0: RX AssocResp from e8:40:40:79:4a:ee (capab=0x101 status=0 aid=4)
>[75257.207564] wlan0: associated
>[75284.826630] device p3p1 left promiscuous mode
>[75397.605132] vboxnetflt: dropped 0 out of 0 packets
>[75397.613253] vboxnetflt: dropped 0 out of 72642 packets
>[75402.578327] device vboxnet0 left promiscuous mode
>[75402.583308] vboxnetflt: dropped 14363 out of 14614 packets
>[75403.086162] wlan0: deauthenticating from e8:40:40:79:4a:ee by local choice (reason=3)
>[75403.099042] cfg80211: Calling CRDA to update world regulatory domain
>[75403.109923] cfg80211: World regulatory domain updated:
>[75403.109927] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75403.109929] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75403.109930] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[75403.109932] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[75403.109934] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75403.109935] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[75403.109951] cfg80211: Calling CRDA for country: SE
>[75403.112423] cfg80211: Regulatory domain changed to country: SE
>[75403.112427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75403.112429] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75403.112430] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75403.112432] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75403.112433] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[75404.844048] PM: Syncing filesystems ... done.
>[75405.098140] PM: Preparing system for mem sleep
>[75405.098156] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[75405.109171] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[75405.120136] PM: Entering mem sleep
>[75405.120191] Suspending console(s) (use no_console_suspend to debug)
>[75405.120536] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[75405.121373] sd 0:0:0:0: [sda] Stopping disk
>[75405.223445] <6>[fglrx] IRQ 49 Disabled
>[75405.223480] <6>[fglrx] Preparing suspend fglrx in kernel.
>[75405.584475] <6>[fglrx] Suspending fglrx in kernel completed.
>[75405.584477] <6>[fglrx] Power down the ASIC .
>[75406.132147] PM: suspend of devices complete after 1011.730 msecs
>[75406.132361] PM: late suspend of devices complete after 0.210 msecs
>[75406.132556] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[75406.176130] PM: noirq suspend of devices complete after 43.766 msecs
>[75406.176632] ACPI: Preparing to enter system sleep state S3
>[75406.176805] PM: Saving platform NVS memory
>[75406.177755] Disabling non-boot CPUs ...
>[75406.179058] smpboot: CPU 1 is now offline
>[75406.179627] Extended CMOS year: 2000
>[75406.179627] ACPI: Low-level resume complete
>[75406.179627] PM: Restoring platform NVS memory
>[75406.179627] Extended CMOS year: 2000
>[75406.179627] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[75406.184917] Enabling non-boot CPUs ...
>[75406.185048] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[75406.200107] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[75406.204933] CPU1 is up
>[75406.206783] ACPI: Waking up from system sleep state S3
>[75406.295248] PM: noirq resume of devices complete after 88.231 msecs
>[75406.295414] PM: early resume of devices complete after 0.052 msecs
>[75406.295443] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[75406.295468] usb usb3: root hub lost power or was reset
>[75406.295470] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[75406.295484] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[75406.295497] usb usb4: root hub lost power or was reset
>[75406.295513] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[75406.295514] usb usb5: root hub lost power or was reset
>[75406.295532] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[75406.295560] usb usb6: root hub lost power or was reset
>[75406.295571] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[75406.295593] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[75406.295595] usb usb7: root hub lost power or was reset
>[75406.295607] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[75406.295634] usb usb8: root hub lost power or was reset
>[75406.295645] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[75406.295656] pci 0000:00:1e.0: setting latency timer to 64
>[75406.295669] ata_piix 0000:00:1f.2: setting latency timer to 64
>[75406.295672] ata_piix 0000:00:1f.5: setting latency timer to 64
>[75406.295778] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[75406.295851] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[75406.298220] <6>[fglrx] Power up the ASIC
>[75406.298231] <6>[fglrx] Preparing resume fglrx in kernel.
>[75406.322779] <6>[fglrx] Resuming fglrx in kernel completed.
>[75406.322891] <6>[fglrx] IRQ 49 Enabled
>[75406.522058] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[75406.615113] ata3: SATA link down (SStatus 0 SControl 300)
>[75406.626092] ata4: SATA link down (SStatus 0 SControl 300)
>[75406.738113] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[75406.755102] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[75406.815260] ata2.00: configured for UDMA/100
>[75410.886210] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[75410.895820] ata1.00: configured for UDMA/133
>[75410.895873] sd 0:0:0:0: [sda] Starting disk
>[75410.907458] Extended CMOS year: 2000
>[75410.921393] PM: resume of devices complete after 4625.976 msecs
>[75410.921663] PM: Finishing wakeup.
>[75410.921664] Restarting tasks ... done.
>[75410.987324] video LNXVIDEO:00: Restoring backlight state
>[75411.134337] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[75411.137806] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[75411.184066] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[75411.195753] r8169 0000:14:00.0: p3p1: link down
>[75411.196505] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[75416.092215] wlan0: authenticate with 00:16:9c:bb:22:62
>[75416.096121] wlan0: send auth to 00:16:9c:bb:22:62 (try 1/3)
>[75416.297050] wlan0: send auth to 00:16:9c:bb:22:62 (try 2/3)
>[75416.298220] wlan0: authenticated
>[75416.299054] wlan0: associate with 00:16:9c:bb:22:62 (try 1/3)
>[75416.304882] wlan0: RX AssocResp from 00:16:9c:bb:22:62 (capab=0x431 status=0 aid=53)
>[75416.307720] wlan0: associated
>[75416.307784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[75416.307907] cfg80211: Calling CRDA for country: SE
>[75416.317947] cfg80211: Regulatory domain changed to country: SE
>[75416.317955] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[75416.317961] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75416.317967] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75416.317972] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[75416.317977] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[75840.650989] wlan0: authenticate with 00:16:9c:bb:22:6d
>[75840.654490] wlan0: send auth to 00:16:9c:bb:22:6d (try 1/3)
>[75840.855056] wlan0: send auth to 00:16:9c:bb:22:6d (try 2/3)
>[75840.855941] wlan0: authenticated
>[75840.856393] wlan0: waiting for beacon from 00:16:9c:bb:22:6d
>[75840.935051] wlan0: associate with 00:16:9c:bb:22:6d (try 1/3)
>[75840.937118] wlan0: RX AssocResp from 00:16:9c:bb:22:6d (capab=0x111 status=0 aid=115)
>[75840.943094] wlan0: associated
>[75853.960273] wlan0: authenticate with 00:16:9c:bb:22:62
>[75853.963504] wlan0: send auth to 00:16:9c:bb:22:62 (try 1/3)
>[75854.164064] wlan0: send auth to 00:16:9c:bb:22:62 (try 2/3)
>[75854.174502] wlan0: authenticated
>[75854.175048] wlan0: associate with 00:16:9c:bb:22:62 (try 1/3)
>[75854.178038] wlan0: RX AssocResp from 00:16:9c:bb:22:62 (capab=0x431 status=0 aid=67)
>[75854.181552] wlan0: associated
>[78061.120275] wlan0: authenticate with 00:16:9c:bb:22:6d
>[78061.123553] wlan0: send auth to 00:16:9c:bb:22:6d (try 1/3)
>[78061.325068] wlan0: send auth to 00:16:9c:bb:22:6d (try 2/3)
>[78061.325946] wlan0: authenticated
>[78061.326404] wlan0: waiting for beacon from 00:16:9c:bb:22:6d
>[78061.407094] wlan0: associate with 00:16:9c:bb:22:6d (try 1/3)
>[78061.409375] wlan0: RX AssocResp from 00:16:9c:bb:22:6d (capab=0x111 status=0 aid=123)
>[78061.412867] wlan0: associated
>[78373.745685] wlan0: authenticate with 00:16:9c:bb:22:62
>[78373.748589] wlan0: send auth to 00:16:9c:bb:22:62 (try 1/3)
>[78373.949049] wlan0: send auth to 00:16:9c:bb:22:62 (try 2/3)
>[78373.950221] wlan0: authenticated
>[78373.950550] wlan0: waiting for beacon from 00:16:9c:bb:22:62
>[78374.050273] wlan0: associate with 00:16:9c:bb:22:62 (try 1/3)
>[78374.053618] wlan0: RX AssocResp from 00:16:9c:bb:22:62 (capab=0x431 status=0 aid=128)
>[78374.057956] wlan0: associated
>[79453.680358] wlan0: authenticate with 00:16:9c:bb:22:6d
>[79453.683509] wlan0: send auth to 00:16:9c:bb:22:6d (try 1/3)
>[79453.884060] wlan0: send auth to 00:16:9c:bb:22:6d (try 2/3)
>[79453.884939] wlan0: authenticated
>[79453.885409] wlan0: waiting for beacon from 00:16:9c:bb:22:6d
>[79453.963058] wlan0: associate with 00:16:9c:bb:22:6d (try 1/3)
>[79453.965206] wlan0: RX AssocResp from 00:16:9c:bb:22:6d (capab=0x111 status=0 aid=132)
>[79453.968678] wlan0: associated
>[79684.062725] wlan0: authenticate with 00:16:9c:bb:22:62
>[79684.065820] wlan0: send auth to 00:16:9c:bb:22:62 (try 1/3)
>[79684.266016] wlan0: send auth to 00:16:9c:bb:22:62 (try 2/3)
>[79684.267198] wlan0: authenticated
>[79684.267385] wlan0: waiting for beacon from 00:16:9c:bb:22:62
>[79684.275053] wlan0: associate with 00:16:9c:bb:22:62 (try 1/3)
>[79684.277834] wlan0: RX AssocResp from 00:16:9c:bb:22:62 (capab=0x431 status=0 aid=174)
>[79684.280977] wlan0: associated
>[79693.914903] wlan0: authenticate with 00:16:9c:bb:22:6d
>[79693.918081] wlan0: send auth to 00:16:9c:bb:22:6d (try 1/3)
>[79694.119035] wlan0: send auth to 00:16:9c:bb:22:6d (try 2/3)
>[79694.120024] wlan0: authenticated
>[79694.121038] wlan0: associate with 00:16:9c:bb:22:6d (try 1/3)
>[79694.123943] wlan0: RX AssocResp from 00:16:9c:bb:22:6d (capab=0x111 status=0 aid=134)
>[79694.127445] wlan0: associated
>[79756.572843] wlan0: authenticate with 00:16:9c:bb:22:62
>[79756.575936] wlan0: send auth to 00:16:9c:bb:22:62 (try 1/3)
>[79756.776023] wlan0: send auth to 00:16:9c:bb:22:62 (try 2/3)
>[79756.777144] wlan0: authenticated
>[79756.778045] wlan0: associate with 00:16:9c:bb:22:62 (try 1/3)
>[79756.780816] wlan0: RX AssocResp from 00:16:9c:bb:22:62 (capab=0x431 status=0 aid=175)
>[79756.783616] wlan0: associated
>[79813.516126] wlan0: authenticate with 00:16:9c:bb:22:6d
>[79813.519273] wlan0: send auth to 00:16:9c:bb:22:6d (try 1/3)
>[79813.720052] wlan0: send auth to 00:16:9c:bb:22:6d (try 2/3)
>[79813.720902] wlan0: authenticated
>[79813.722039] wlan0: associate with 00:16:9c:bb:22:6d (try 1/3)
>[79813.723846] wlan0: RX AssocResp from 00:16:9c:bb:22:6d (capab=0x111 status=0 aid=132)
>[79813.726955] wlan0: associated
>[79835.151575] wlan0: deauthenticating from 00:16:9c:bb:22:6d by local choice (reason=3)
>[79835.223534] cfg80211: Calling CRDA to update world regulatory domain
>[79835.309696] cfg80211: World regulatory domain updated:
>[79835.309700] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79835.309702] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79835.309704] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[79835.309705] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[79835.309707] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79835.309708] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79835.309718] cfg80211: Calling CRDA for country: SE
>[79835.312625] cfg80211: Regulatory domain changed to country: SE
>[79835.312628] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79835.312630] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79835.312632] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79835.312633] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79835.312635] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[79837.098403] PM: Syncing filesystems ... done.
>[79837.116433] PM: Preparing system for mem sleep
>[79837.116447] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[79837.127139] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[79837.138167] PM: Entering mem sleep
>[79837.138218] Suspending console(s) (use no_console_suspend to debug)
>[79837.138563] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[79837.242302] <6>[fglrx] IRQ 49 Disabled
>[79837.242339] <6>[fglrx] Preparing suspend fglrx in kernel.
>[79837.362988] sd 0:0:0:0: [sda] Stopping disk
>[79837.602076] <6>[fglrx] Suspending fglrx in kernel completed.
>[79837.602077] <6>[fglrx] Power down the ASIC .
>[79838.374160] PM: suspend of devices complete after 1235.718 msecs
>[79838.374374] PM: late suspend of devices complete after 0.211 msecs
>[79838.374567] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[79838.418131] PM: noirq suspend of devices complete after 43.754 msecs
>[79838.418631] ACPI: Preparing to enter system sleep state S3
>[79838.418797] PM: Saving platform NVS memory
>[79838.419745] Disabling non-boot CPUs ...
>[79838.421047] smpboot: CPU 1 is now offline
>[79838.421583] Extended CMOS year: 2000
>[79838.421583] ACPI: Low-level resume complete
>[79838.421583] PM: Restoring platform NVS memory
>[79838.421583] Extended CMOS year: 2000
>[79838.421583] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[79838.426879] Enabling non-boot CPUs ...
>[79838.426968] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[79838.441812] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[79838.446618] CPU1 is up
>[79838.448490] ACPI: Waking up from system sleep state S3
>[79838.536259] PM: noirq resume of devices complete after 87.542 msecs
>[79838.536423] PM: early resume of devices complete after 0.053 msecs
>[79838.536451] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[79838.536475] usb usb3: root hub lost power or was reset
>[79838.536479] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[79838.536489] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[79838.536504] usb usb4: root hub lost power or was reset
>[79838.536517] usb usb5: root hub lost power or was reset
>[79838.536520] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[79838.536548] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[79838.536574] usb usb6: root hub lost power or was reset
>[79838.536586] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[79838.536587] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[79838.536611] usb usb7: root hub lost power or was reset
>[79838.536621] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[79838.536646] usb usb8: root hub lost power or was reset
>[79838.536649] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[79838.536658] pci 0000:00:1e.0: setting latency timer to 64
>[79838.536670] ata_piix 0000:00:1f.2: setting latency timer to 64
>[79838.536677] ata_piix 0000:00:1f.5: setting latency timer to 64
>[79838.536777] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[79838.536840] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[79838.539218] <6>[fglrx] Power up the ASIC
>[79838.539229] <6>[fglrx] Preparing resume fglrx in kernel.
>[79838.563939] <6>[fglrx] Resuming fglrx in kernel completed.
>[79838.564051] <6>[fglrx] IRQ 49 Enabled
>[79838.763058] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[79838.856042] ata4: SATA link down (SStatus 0 SControl 300)
>[79838.867019] ata3: SATA link down (SStatus 0 SControl 300)
>[79838.981115] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[79838.996083] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[79839.091237] ata2.00: configured for UDMA/100
>[79843.138182] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[79843.147766] ata1.00: configured for UDMA/133
>[79843.147822] sd 0:0:0:0: [sda] Starting disk
>[79843.156732] Extended CMOS year: 2000
>[79843.178808] PM: resume of devices complete after 4642.382 msecs
>[79843.179092] PM: Finishing wakeup.
>[79843.179093] Restarting tasks ... done.
>[79843.251330] video LNXVIDEO:00: Restoring backlight state
>[79843.395395] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[79843.398824] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[79843.441370] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[79843.452788] r8169 0000:14:00.0: p3p1: link down
>[79843.454175] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[79847.736144] wlan0: authenticate with d4:d7:48:80:e6:af
>[79847.744856] wlan0: send auth to d4:d7:48:80:e6:af (try 1/3)
>[79847.945029] wlan0: send auth to d4:d7:48:80:e6:af (try 2/3)
>[79847.945788] wlan0: authenticated
>[79847.945978] wlan0: waiting for beacon from d4:d7:48:80:e6:af
>[79847.989037] wlan0: associate with d4:d7:48:80:e6:af (try 1/3)
>[79847.996740] wlan0: RX AssocResp from d4:d7:48:80:e6:af (capab=0x111 status=0 aid=3)
>[79848.001220] wlan0: associated
>[79848.001288] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[79848.001462] cfg80211: Calling CRDA for country: SE
>[79848.014093] cfg80211: Regulatory domain changed to country: SE
>[79848.014101] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79848.014107] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79848.014113] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79848.014118] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79848.014123] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[79942.844967] wlan0: deauthenticating from d4:d7:48:80:e6:af by local choice (reason=3)
>[79942.875412] cfg80211: Calling CRDA to update world regulatory domain
>[79942.889898] cfg80211: World regulatory domain updated:
>[79942.889902] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79942.889904] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79942.889906] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[79942.889908] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[79942.889909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79942.889911] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[79942.889926] cfg80211: Calling CRDA for country: SE
>[79942.892391] cfg80211: Regulatory domain changed to country: SE
>[79942.892394] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[79942.892396] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79942.892398] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79942.892399] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[79942.892401] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[79944.833276] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[79944.833281] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[79944.833283] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[79944.833286] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[79944.833297] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[79944.833298] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[79944.833301] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[79944.833302] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[79944.834116] PM: Basic memory bitmaps created
>[79944.834118] PM: Syncing filesystems ... done.
>[79944.852170] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[79944.863286] PM: Preallocating image memory... done (allocated 610098 pages)
>[79945.832739] PM: Allocated 2440392 kbytes in 0.96 seconds (2542.07 MB/s)
>[79945.832741] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[79945.843365] Suspending console(s) (use no_console_suspend to debug)
>[79945.843862] <6>[fglrx] IRQ 49 Disabled
>[79945.843906] <6>[fglrx] Preparing suspend fglrx in kernel.
>[79946.044056] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[79946.206632] <6>[fglrx] Suspending fglrx in kernel completed.
>[79946.206633] <6>[fglrx] Power down the ASIC .
>[79946.257139] PM: freeze of devices complete after 413.769 msecs
>[79946.257360] PM: late freeze of devices complete after 0.218 msecs
>[79946.258116] PM: noirq freeze of devices complete after 0.753 msecs
>[79946.258641] ACPI: Preparing to enter system sleep state S4
>[79946.266010] PM: Saving platform NVS memory
>[79946.266927] Disabling non-boot CPUs ...
>[79946.268228] smpboot: CPU 1 is now offline
>[79946.268821] Extended CMOS year: 2000
>[79946.268890] PM: Creating hibernation image:
>[79946.269223] PM: Need to copy 206774 pages
>[79946.269223] PM: Normal pages needed: 206774 + 1024, available pages: 832691
>[79946.269223] PM: Restoring platform NVS memory
>[79946.269223] Extended CMOS year: 2000
>[79946.269223] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[79946.285323] Enabling non-boot CPUs ...
>[79946.285512] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[79946.298003] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[79946.303020] CPU1 is up
>[79946.304768] ACPI: Waking up from system sleep state S4
>[79946.305226] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
>[79946.305250] pci 0000:02:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
>[79946.305332] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>[79946.305446] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
>[79946.305467] pci 0000:02:00.2: reg 10: [mem 0xf2100400-0xf21004ff]
>[79946.305655] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
>[79946.305675] pci 0000:02:00.3: reg 10: [mem 0xf2100800-0xf21008ff]
>[79946.307062] acpi device:34: parent device:20 should not be sleeping
>[79946.307100] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc000ffff pref]
>[79946.307103] pci 0000:02:00.0: BAR 0: assigned [mem 0xf2100000-0xf21000ff]
>[79946.307108] pci 0000:02:00.2: BAR 0: assigned [mem 0xf2100100-0xf21001ff]
>[79946.307114] pci 0000:02:00.3: BAR 0: assigned [mem 0xf2100200-0xf21002ff]
>[79946.307123] pci 0000:02:00.0: no hotplug settings from platform
>[79946.307126] pci 0000:02:00.2: no hotplug settings from platform
>[79946.307130] pci 0000:02:00.3: no hotplug settings from platform
>[79946.307178] pci 0000:02:00.0: parent 0000:00:1c.0 should not be sleeping
>[79946.307201] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
>[79946.307315] Registered led device: mmc0::
>[79946.327395] PM: noirq restore of devices complete after 22.453 msecs
>[79946.327478] PM: early restore of devices complete after 0.055 msecs
>[79946.383192] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
>[79946.383286] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[79946.383310] usb usb3: root hub lost power or was reset
>[79946.383323] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[79946.383345] usb usb4: root hub lost power or was reset
>[79946.383356] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[79946.383378] usb usb5: root hub lost power or was reset
>[79946.383391] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[79946.383409] usb usb1: root hub lost power or was reset
>[79946.385144] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[79946.385203] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[79946.385226] usb usb6: root hub lost power or was reset
>[79946.385237] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[79946.385260] usb usb7: root hub lost power or was reset
>[79946.385270] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[79946.385294] usb usb8: root hub lost power or was reset
>[79946.385307] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[79946.385321] usb usb2: root hub lost power or was reset
>[79946.387291] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[79946.387303] pci 0000:00:1e.0: setting latency timer to 64
>[79946.387317] ata_piix 0000:00:1f.2: setting latency timer to 64
>[79946.387330] ata_piix 0000:00:1f.5: setting latency timer to 64
>[79946.389216] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[79946.389271] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[79946.389328] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[79946.408135] <6>[fglrx] Power up the ASIC
>[79946.408147] <6>[fglrx] Preparing resume fglrx in kernel.
>[79946.408838] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
>[79946.408854] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
>[79946.432927] <6>[fglrx] Resuming fglrx in kernel completed.
>[79946.433037] <6>[fglrx] IRQ 49 Enabled
>[79946.709077] ata4: SATA link down (SStatus 0 SControl 300)
>[79946.720049] ata3: SATA link down (SStatus 0 SControl 300)
>[79946.720060] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[79946.849081] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[79946.850079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[79946.859634] ata1.00: configured for UDMA/133
>[79946.859688] sd 0:0:0:0: [sda] Starting disk
>[79946.890183] ata2.00: configured for UDMA/100
>[79946.898566] Extended CMOS year: 2000
>[79946.936065] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[79947.093526] PM: restore of devices complete after 710.364 msecs
>[79947.093737] PM: Image restored successfully.
>[79947.093739] Restarting tasks ... done.
>[79947.094428] PM: Basic memory bitmaps freed
>[79947.094576] video LNXVIDEO:00: Restoring backlight state
>[79948.705047] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[79948.708419] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[79948.750691] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[79948.760477] r8169 0000:14:00.0: p3p1: link down
>[79948.760540] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[79957.238565] wlan0: authenticate with 84:1b:5e:02:d5:33
>[79957.242558] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[79957.244417] wlan0: authenticated
>[79957.245043] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[79957.446058] wlan0: associate with 84:1b:5e:02:d5:33 (try 2/3)
>[79957.449974] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=5)
>[79957.458077] wlan0: associated
>[79957.458152] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[79981.910491] usb 4-2: new low-speed USB device number 5 using uhci_hcd
>[79982.082477] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[79982.082489] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[79982.082496] usb 4-2: Product: USB Laser Mouse
>[79982.082502] usb 4-2: Manufacturer: Logitech
>[79982.103446] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input15
>[79982.103879] hid-generic 0003:046D:C062.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[85247.579459] device vboxnet0 entered promiscuous mode
>[85255.131442] device p3p1 entered promiscuous mode
>[87517.557162] device p3p1 left promiscuous mode
>[87537.564102] vboxnetflt: dropped 0 out of 0 packets
>[87537.568031] vboxnetflt: dropped 0 out of 16584 packets
>[87541.856354] device vboxnet0 left promiscuous mode
>[87541.862070] vboxnetflt: dropped 329282 out of 329504 packets
>[106286.244485] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[106286.273742] cfg80211: Calling CRDA to update world regulatory domain
>[106286.431702] cfg80211: World regulatory domain updated:
>[106286.431706] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106286.431707] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106286.431709] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106286.431711] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[106286.431712] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106286.431714] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[106286.431722] cfg80211: Calling CRDA for country: SE
>[106286.433982] cfg80211: Regulatory domain changed to country: SE
>[106286.433984] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[106286.433986] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[106286.433988] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[106286.433989] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[106286.433991] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[106288.411601] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[106288.411606] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[106288.411607] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[106288.411610] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[106288.411621] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[106288.411623] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[106288.411625] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[106288.411627] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[106288.412460] PM: Basic memory bitmaps created
>[106288.412461] PM: Syncing filesystems ... done.
>[106288.583763] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[106288.595249] PM: Preallocating image memory... done (allocated 610096 pages)
>[106289.215866] PM: Allocated 2440384 kbytes in 0.62 seconds (3936.10 MB/s)
>[106289.215869] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[106289.226341] Suspending console(s) (use no_console_suspend to debug)
>[106289.226501] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[106289.227012] <6>[fglrx] IRQ 49 Disabled
>[106289.227042] <6>[fglrx] Preparing suspend fglrx in kernel.
>[106289.587732] <6>[fglrx] Suspending fglrx in kernel completed.
>[106289.587734] <6>[fglrx] Power down the ASIC .
>[106289.642166] PM: freeze of devices complete after 415.819 msecs
>[106289.642390] PM: late freeze of devices complete after 0.221 msecs
>[106289.643274] PM: noirq freeze of devices complete after 0.882 msecs
>[106289.643822] ACPI: Preparing to enter system sleep state S4
>[106289.652146] PM: Saving platform NVS memory
>[106289.653101] Disabling non-boot CPUs ...
>[106289.654381] smpboot: CPU 1 is now offline
>[106289.654961] Extended CMOS year: 2000
>[106289.655031] PM: Creating hibernation image:
>[106289.655375] PM: Need to copy 392237 pages
>[106289.655375] PM: Normal pages needed: 392237 + 1024, available pages: 647228
>[106289.655375] PM: Restoring platform NVS memory
>[106289.655375] Extended CMOS year: 2000
>[106289.655375] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[106289.660281] Enabling non-boot CPUs ...
>[106289.660370] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[106289.673004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[106289.678020] CPU1 is up
>[106289.679773] ACPI: Waking up from system sleep state S4
>[106289.713098] PM: noirq restore of devices complete after 33.148 msecs
>[106289.713183] PM: early restore of devices complete after 0.056 msecs
>[106289.807774] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[106289.807798] usb usb3: root hub lost power or was reset
>[106289.807810] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[106289.807828] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[106289.807835] usb usb4: root hub lost power or was reset
>[106289.807851] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[106289.807853] usb usb5: root hub lost power or was reset
>[106289.807909] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[106289.807935] usb usb6: root hub lost power or was reset
>[106289.807946] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[106289.807970] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[106289.807971] usb usb7: root hub lost power or was reset
>[106289.807982] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[106289.808003] usb usb8: root hub lost power or was reset
>[106289.808032] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[106289.808043] pci 0000:00:1e.0: setting latency timer to 64
>[106289.808048] usb usb2: root hub lost power or was reset
>[106289.808056] ata_piix 0000:00:1f.2: setting latency timer to 64
>[106289.808069] ata_piix 0000:00:1f.5: setting latency timer to 64
>[106289.811926] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[106289.811980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[106289.812033] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[106289.817950] usb usb1: root hub lost power or was reset
>[106289.821845] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[106289.831184] <6>[fglrx] Power up the ASIC
>[106289.831196] <6>[fglrx] Preparing resume fglrx in kernel.
>[106289.855470] <6>[fglrx] Resuming fglrx in kernel completed.
>[106289.855573] <6>[fglrx] IRQ 49 Enabled
>[106290.130982] ata4: SATA link down (SStatus 0 SControl 300)
>[106290.141996] ata3: SATA link down (SStatus 0 SControl 300)
>[106290.142025] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[106290.282089] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[106290.282214] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[106290.291664] ata1.00: configured for UDMA/133
>[106290.291717] sd 0:0:0:0: [sda] Starting disk
>[106290.323234] ata2.00: configured for UDMA/100
>[106290.358038] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[106290.463915] Extended CMOS year: 2000
>[106290.758125] usb 4-2: reset low-speed USB device number 5 using uhci_hcd
>[106291.069542] PM: restore of devices complete after 1261.841 msecs
>[106291.069673] PM: Image restored successfully.
>[106291.069675] Restarting tasks ... done.
>[106291.074539] PM: Basic memory bitmaps freed
>[106291.074685] video LNXVIDEO:00: Restoring backlight state
>[106291.418914] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[106291.424604] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[106291.469593] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[106291.483774] r8169 0000:14:00.0: p3p1: link down
>[106291.484100] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[106296.851876] wlan0: authenticate with 84:1b:5e:02:d5:33
>[106296.858463] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[106296.860316] wlan0: authenticated
>[106296.861076] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[106296.865336] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=5)
>[106296.874439] wlan0: associated
>[106296.874535] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[126129.664363] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[126129.699073] cfg80211: Calling CRDA to update world regulatory domain
>[126129.916241] cfg80211: World regulatory domain updated:
>[126129.916245] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[126129.916247] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126129.916248] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[126129.916250] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[126129.916252] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126129.916253] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126129.916261] cfg80211: Calling CRDA for country: SE
>[126129.919317] cfg80211: Regulatory domain changed to country: SE
>[126129.919320] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[126129.919322] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126129.919323] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126129.919325] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126129.919327] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[126131.851525] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[126131.851530] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[126131.851532] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[126131.851535] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[126131.851546] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[126131.851547] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[126131.851550] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[126131.851551] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[126131.852380] PM: Basic memory bitmaps created
>[126131.852381] PM: Syncing filesystems ... done.
>[126132.136165] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[126132.147245] PM: Preallocating image memory... done (allocated 610096 pages)
>[126133.148990] PM: Allocated 2440384 kbytes in 1.00 seconds (2440.38 MB/s)
>[126133.148992] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[126133.160342] Suspending console(s) (use no_console_suspend to debug)
>[126133.160593] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[126133.161116] <6>[fglrx] IRQ 49 Disabled
>[126133.161167] <6>[fglrx] Preparing suspend fglrx in kernel.
>[126133.519457] <6>[fglrx] Suspending fglrx in kernel completed.
>[126133.519459] <6>[fglrx] Power down the ASIC .
>[126133.579147] PM: freeze of devices complete after 418.799 msecs
>[126133.579372] PM: late freeze of devices complete after 0.222 msecs
>[126133.580257] PM: noirq freeze of devices complete after 0.882 msecs
>[126133.580801] ACPI: Preparing to enter system sleep state S4
>[126133.588170] PM: Saving platform NVS memory
>[126133.589114] Disabling non-boot CPUs ...
>[126133.590415] smpboot: CPU 1 is now offline
>[126133.591024] Extended CMOS year: 2000
>[126133.591092] PM: Creating hibernation image:
>[126133.591411] PM: Need to copy 273137 pages
>[126133.591411] PM: Normal pages needed: 273137 + 1024, available pages: 766328
>[126133.591411] PM: Restoring platform NVS memory
>[126133.591411] Extended CMOS year: 2000
>[126133.591411] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[126133.596306] Enabling non-boot CPUs ...
>[126133.596401] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[126133.609004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[126133.614019] CPU1 is up
>[126133.615770] ACPI: Waking up from system sleep state S4
>[126133.649091] PM: noirq restore of devices complete after 33.144 msecs
>[126133.649175] PM: early restore of devices complete after 0.055 msecs
>[126133.719201] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[126133.719225] usb usb3: root hub lost power or was reset
>[126133.719237] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[126133.719259] usb usb4: root hub lost power or was reset
>[126133.719271] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[126133.719294] usb usb5: root hub lost power or was reset
>[126133.719306] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[126133.719326] usb usb1: root hub lost power or was reset
>[126133.720119] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[126133.721052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[126133.721076] usb usb6: root hub lost power or was reset
>[126133.721086] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[126133.721109] usb usb7: root hub lost power or was reset
>[126133.721120] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[126133.721143] usb usb8: root hub lost power or was reset
>[126133.721156] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[126133.721171] usb usb2: root hub lost power or was reset
>[126133.723227] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[126133.723236] pci 0000:00:1e.0: setting latency timer to 64
>[126133.723250] ata_piix 0000:00:1f.2: setting latency timer to 64
>[126133.723263] ata_piix 0000:00:1f.5: setting latency timer to 64
>[126133.725060] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[126133.725112] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[126133.725162] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[126133.750601] <6>[fglrx] Power up the ASIC
>[126133.750613] <6>[fglrx] Preparing resume fglrx in kernel.
>[126133.775016] <6>[fglrx] Resuming fglrx in kernel completed.
>[126133.775119] <6>[fglrx] IRQ 49 Enabled
>[126134.052054] ata3: SATA link down (SStatus 0 SControl 300)
>[126134.063033] ata4: SATA link down (SStatus 0 SControl 300)
>[126134.063072] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[126134.185101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[126134.189096] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[126134.194609] ata1.00: configured for UDMA/133
>[126134.194663] sd 0:0:0:0: [sda] Starting disk
>[126134.230257] ata2.00: configured for UDMA/100
>[126134.239725] Extended CMOS year: 2000
>[126134.279116] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[126134.679053] usb 4-2: reset low-speed USB device number 5 using uhci_hcd
>[126134.987487] PM: restore of devices complete after 1268.368 msecs
>[126134.987661] PM: Image restored successfully.
>[126134.987662] Restarting tasks ... done.
>[126134.990152] PM: Basic memory bitmaps freed
>[126135.050217] video LNXVIDEO:00: Restoring backlight state
>[126136.902563] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[126136.908095] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[126136.951205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[126136.961754] r8169 0000:14:00.0: p3p1: link down
>[126136.961813] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[126143.192980] wlan0: authenticate with 84:1b:5e:02:d5:33
>[126143.195110] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[126143.197119] wlan0: authenticated
>[126143.198034] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[126143.201919] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=3)
>[126143.211309] wlan0: associated
>[126143.211380] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[126421.708372] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[126421.800427] cfg80211: Calling CRDA to update world regulatory domain
>[126421.875544] cfg80211: World regulatory domain updated:
>[126421.875547] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[126421.875550] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126421.875551] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[126421.875553] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[126421.875555] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126421.875556] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[126421.875563] cfg80211: Calling CRDA for country: SE
>[126421.877785] cfg80211: Regulatory domain changed to country: SE
>[126421.877788] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[126421.877790] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126421.877792] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126421.877793] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[126421.877795] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[126423.801160] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[126423.801165] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[126423.801166] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[126423.801169] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[126423.801180] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[126423.801182] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[126423.801184] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[126423.801186] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[126423.801976] PM: Basic memory bitmaps created
>[126423.801977] PM: Syncing filesystems ... done.
>[126423.805016] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[126423.816212] PM: Preallocating image memory... done (allocated 312156 pages)
>[126424.016944] PM: Allocated 1248624 kbytes in 0.20 seconds (6243.12 MB/s)
>[126424.016946] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[126424.028361] Suspending console(s) (use no_console_suspend to debug)
>[126424.028530] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[126424.029040] <6>[fglrx] IRQ 49 Disabled
>[126424.029079] <6>[fglrx] Preparing suspend fglrx in kernel.
>[126424.390918] <6>[fglrx] Suspending fglrx in kernel completed.
>[126424.390920] <6>[fglrx] Power down the ASIC .
>[126424.444164] PM: freeze of devices complete after 415.797 msecs
>[126424.444385] PM: late freeze of devices complete after 0.218 msecs
>[126424.445270] PM: noirq freeze of devices complete after 0.883 msecs
>[126424.445813] ACPI: Preparing to enter system sleep state S4
>[126424.453182] PM: Saving platform NVS memory
>[126424.454137] Disabling non-boot CPUs ...
>[126424.455415] smpboot: CPU 1 is now offline
>[126424.455937] Extended CMOS year: 2000
>[126424.456007] PM: Creating hibernation image:
>[126424.456410] PM: Need to copy 312540 pages
>[126424.456410] PM: Normal pages needed: 312540 + 1024, available pages: 726925
>[126424.456410] PM: Restoring platform NVS memory
>[126424.456410] Extended CMOS year: 2000
>[126424.456410] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[126424.461219] Enabling non-boot CPUs ...
>[126424.461306] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[126424.474004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[126424.479020] CPU1 is up
>[126424.480775] ACPI: Waking up from system sleep state S4
>[126424.514093] PM: noirq restore of devices complete after 33.142 msecs
>[126424.514177] PM: early restore of devices complete after 0.055 msecs
>[126424.594365] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[126424.594388] usb usb3: root hub lost power or was reset
>[126424.594400] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[126424.594424] usb usb4: root hub lost power or was reset
>[126424.594435] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[126424.594457] usb usb5: root hub lost power or was reset
>[126424.594470] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[126424.594489] usb usb1: root hub lost power or was reset
>[126424.594723] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[126424.594795] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[126424.594818] usb usb6: root hub lost power or was reset
>[126424.594829] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[126424.594852] usb usb7: root hub lost power or was reset
>[126424.594863] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[126424.594885] usb usb8: root hub lost power or was reset
>[126424.594898] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[126424.594914] usb usb2: root hub lost power or was reset
>[126424.598384] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[126424.598391] pci 0000:00:1e.0: setting latency timer to 64
>[126424.598406] ata_piix 0000:00:1f.2: setting latency timer to 64
>[126424.598418] ata_piix 0000:00:1f.5: setting latency timer to 64
>[126424.598812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[126424.598862] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[126424.598915] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[126424.629069] <6>[fglrx] Power up the ASIC
>[126424.629081] <6>[fglrx] Preparing resume fglrx in kernel.
>[126424.653419] <6>[fglrx] Resuming fglrx in kernel completed.
>[126424.653525] <6>[fglrx] IRQ 49 Enabled
>[126424.918109] ata4: SATA link down (SStatus 0 SControl 300)
>[126424.926050] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[126424.929075] ata3: SATA link down (SStatus 0 SControl 300)
>[126425.058088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[126425.058213] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[126425.067649] ata1.00: configured for UDMA/133
>[126425.067707] sd 0:0:0:0: [sda] Starting disk
>[126425.099287] ata2.00: configured for UDMA/100
>[126425.106682] Extended CMOS year: 2000
>[126425.142141] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[126425.542050] usb 4-2: reset low-speed USB device number 5 using uhci_hcd
>[126425.851322] PM: restore of devices complete after 1257.034 msecs
>[126425.851502] PM: Image restored successfully.
>[126425.851503] Restarting tasks ... done.
>[126425.852712] PM: Basic memory bitmaps freed
>[126425.912329] video LNXVIDEO:00: Restoring backlight state
>[126426.012921] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[126426.019526] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[126426.060376] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[126426.070799] r8169 0000:14:00.0: p3p1: link down
>[126426.070936] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[126431.498953] wlan0: authenticate with 84:1b:5e:02:d5:33
>[126431.500728] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[126431.502547] wlan0: authenticated
>[126431.503041] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[126431.704109] wlan0: associate with 84:1b:5e:02:d5:33 (try 2/3)
>[126431.708027] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=3)
>[126431.713669] wlan0: associated
>[126431.713759] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[134202.178173] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[134202.211431] cfg80211: Calling CRDA to update world regulatory domain
>[134202.235440] cfg80211: World regulatory domain updated:
>[134202.235444] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[134202.235446] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[134202.235448] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[134202.235449] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[134202.235451] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[134202.235452] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[134202.235461] cfg80211: Calling CRDA for country: SE
>[134202.238090] cfg80211: Regulatory domain changed to country: SE
>[134202.238093] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[134202.238094] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[134202.238096] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[134202.238098] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[134202.238099] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[134204.559164] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[134204.559169] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[134204.559170] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[134204.559174] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[134204.559184] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[134204.559186] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[134204.559188] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[134204.559190] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[134204.559980] PM: Basic memory bitmaps created
>[134204.559981] PM: Syncing filesystems ... done.
>[134204.565082] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[134204.576239] PM: Preallocating image memory... done (allocated 610098 pages)
>[134205.109849] PM: Allocated 2440392 kbytes in 0.53 seconds (4604.51 MB/s)
>[134205.109851] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[134205.120342] Suspending console(s) (use no_console_suspend to debug)
>[134205.120578] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[134205.121079] <6>[fglrx] IRQ 49 Disabled
>[134205.121111] <6>[fglrx] Preparing suspend fglrx in kernel.
>[134205.483582] <6>[fglrx] Suspending fglrx in kernel completed.
>[134205.483584] <6>[fglrx] Power down the ASIC .
>[134205.536166] PM: freeze of devices complete after 415.819 msecs
>[134205.536387] PM: late freeze of devices complete after 0.217 msecs
>[134205.537272] PM: noirq freeze of devices complete after 0.883 msecs
>[134205.537816] ACPI: Preparing to enter system sleep state S4
>[134205.545188] PM: Saving platform NVS memory
>[134205.546151] Disabling non-boot CPUs ...
>[134205.547431] smpboot: CPU 1 is now offline
>[134205.548329] Extended CMOS year: 2000
>[134205.548397] PM: Creating hibernation image:
>[134205.549008] PM: Need to copy 372948 pages
>[134205.549008] PM: Normal pages needed: 372948 + 1024, available pages: 666517
>[134205.549008] PM: Restoring platform NVS memory
>[134205.549008] Extended CMOS year: 2000
>[134205.549008] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[134205.553644] Enabling non-boot CPUs ...
>[134205.553735] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[134205.566135] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[134205.572023] CPU1 is up
>[134205.573783] ACPI: Waking up from system sleep state S4
>[134205.607091] PM: noirq restore of devices complete after 33.130 msecs
>[134205.607177] PM: early restore of devices complete after 0.056 msecs
>[134205.701320] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[134205.701344] usb usb3: root hub lost power or was reset
>[134205.701356] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[134205.701378] usb usb4: root hub lost power or was reset
>[134205.701389] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[134205.701411] usb usb5: root hub lost power or was reset
>[134205.701423] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[134205.701443] usb usb1: root hub lost power or was reset
>[134205.701717] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[134205.701789] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[134205.701813] usb usb6: root hub lost power or was reset
>[134205.701823] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[134205.701846] usb usb7: root hub lost power or was reset
>[134205.701857] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[134205.701880] usb usb8: root hub lost power or was reset
>[134205.701893] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[134205.701909] usb usb2: root hub lost power or was reset
>[134205.705321] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[134205.705330] pci 0000:00:1e.0: setting latency timer to 64
>[134205.705344] ata_piix 0000:00:1f.2: setting latency timer to 64
>[134205.705357] ata_piix 0000:00:1f.5: setting latency timer to 64
>[134205.705811] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[134205.705863] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[134205.705914] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[134205.728884] <6>[fglrx] Power up the ASIC
>[134205.728895] <6>[fglrx] Preparing resume fglrx in kernel.
>[134205.753343] <6>[fglrx] Resuming fglrx in kernel completed.
>[134205.753446] <6>[fglrx] IRQ 49 Enabled
>[134206.025054] ata4: SATA link down (SStatus 0 SControl 300)
>[134206.036011] ata3: SATA link down (SStatus 0 SControl 300)
>[134206.036019] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[134206.165083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[134206.165209] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[134206.174641] ata1.00: configured for UDMA/133
>[134206.174706] sd 0:0:0:0: [sda] Starting disk
>[134206.206257] ata2.00: configured for UDMA/100
>[134206.213200] Extended CMOS year: 2000
>[134206.252117] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[134206.653105] usb 4-2: reset low-speed USB device number 5 using uhci_hcd
>[134206.961595] PM: restore of devices complete after 1260.330 msecs
>[134206.961761] PM: Image restored successfully.
>[134206.961762] Restarting tasks ... done.
>[134206.966097] PM: Basic memory bitmaps freed
>[134207.026276] video LNXVIDEO:00: Restoring backlight state
>[134207.293768] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[134207.297037] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[134207.343755] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[134207.354055] r8169 0000:14:00.0: p3p1: link down
>[134207.355319] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[134212.788363] wlan0: authenticate with 84:1b:5e:02:d5:33
>[134212.794358] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[134212.796346] wlan0: authenticated
>[134212.797015] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[134212.800804] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=3)
>[134212.805579] wlan0: associated
>[134212.805617] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[142959.954070] usb 4-2: USB disconnect, device number 5
>[143887.004077] usb 4-2: new low-speed USB device number 6 using uhci_hcd
>[143887.166430] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[143887.166441] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[143887.166449] usb 4-2: Product: USB Laser Mouse
>[143887.166455] usb 4-2: Manufacturer: Logitech
>[143887.187286] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input16
>[143887.188175] hid-generic 0003:046D:C062.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[147381.563268] device vboxnet0 entered promiscuous mode
>[147397.527363] device p3p1 entered promiscuous mode
>[147427.194440] EXT4-fs (dm-2): Unaligned AIO/DIO on inode 6292029 by VirtualBox; performance will be poor.
>[147722.527636] device p3p1 left promiscuous mode
>[147744.620107] vboxnetflt: dropped 0 out of 0 packets
>[147744.623055] vboxnetflt: dropped 0 out of 710 packets
>[147748.154526] device vboxnet0 left promiscuous mode
>[147748.157082] vboxnetflt: dropped 1016 out of 1133 packets
>[151109.454143] usb 4-2: USB disconnect, device number 6
>[151241.155325] usb 4-2: new low-speed USB device number 7 using uhci_hcd
>[151241.318243] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[151241.318253] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[151241.318261] usb 4-2: Product: USB Laser Mouse
>[151241.318267] usb 4-2: Manufacturer: Logitech
>[151241.338668] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input17
>[151241.339444] hid-generic 0003:046D:C062.0006: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[152063.478908] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[152063.516033] cfg80211: Calling CRDA to update world regulatory domain
>[152063.706358] cfg80211: World regulatory domain updated:
>[152063.706362] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[152063.706364] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[152063.706365] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[152063.706367] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[152063.706369] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[152063.706370] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[152063.706378] cfg80211: Calling CRDA for country: SE
>[152063.709339] cfg80211: Regulatory domain changed to country: SE
>[152063.709342] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[152063.709344] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[152063.709346] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[152063.709347] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[152063.709349] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[152066.341264] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[152066.341269] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[152066.341271] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[152066.341274] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[152066.341284] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[152066.341286] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[152066.341288] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[152066.341290] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[152066.342102] PM: Basic memory bitmaps created
>[152066.342104] PM: Syncing filesystems ... done.
>[152066.351659] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[152066.363267] PM: Preallocating image memory... done (allocated 610098 pages)
>[152066.911875] PM: Allocated 2440392 kbytes in 0.54 seconds (4519.24 MB/s)
>[152066.911878] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[152066.923340] Suspending console(s) (use no_console_suspend to debug)
>[152066.923594] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[152066.924131] <6>[fglrx] IRQ 49 Disabled
>[152066.924256] <6>[fglrx] Preparing suspend fglrx in kernel.
>[152067.282373] <6>[fglrx] Suspending fglrx in kernel completed.
>[152067.282375] <6>[fglrx] Power down the ASIC .
>[152067.338153] PM: freeze of devices complete after 414.807 msecs
>[152067.338382] PM: late freeze of devices complete after 0.226 msecs
>[152067.339268] PM: noirq freeze of devices complete after 0.884 msecs
>[152067.339817] ACPI: Preparing to enter system sleep state S4
>[152067.348134] PM: Saving platform NVS memory
>[152067.349091] Disabling non-boot CPUs ...
>[152067.350394] smpboot: CPU 1 is now offline
>[152067.350973] Extended CMOS year: 2000
>[152067.351043] PM: Creating hibernation image:
>[152067.351389] PM: Need to copy 341568 pages
>[152067.351389] PM: Normal pages needed: 341568 + 1024, available pages: 697897
>[152067.351389] PM: Restoring platform NVS memory
>[152067.351389] Extended CMOS year: 2000
>[152067.351389] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[152067.356257] Enabling non-boot CPUs ...
>[152067.356353] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[152067.369004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[152067.374020] CPU1 is up
>[152067.375774] ACPI: Waking up from system sleep state S4
>[152067.409092] PM: noirq restore of devices complete after 33.142 msecs
>[152067.409177] PM: early restore of devices complete after 0.056 msecs
>[152067.495704] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[152067.495729] usb usb3: root hub lost power or was reset
>[152067.495741] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[152067.495763] usb usb4: root hub lost power or was reset
>[152067.495773] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[152067.495777] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[152067.495796] usb usb5: root hub lost power or was reset
>[152067.495830] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[152067.495855] usb usb6: root hub lost power or was reset
>[152067.495867] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[152067.495891] usb usb7: root hub lost power or was reset
>[152067.495894] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[152067.495902] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[152067.495925] usb usb8: root hub lost power or was reset
>[152067.495939] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[152067.495954] pci 0000:00:1e.0: setting latency timer to 64
>[152067.495957] usb usb2: root hub lost power or was reset
>[152067.495967] ata_piix 0000:00:1f.2: setting latency timer to 64
>[152067.495979] ata_piix 0000:00:1f.5: setting latency timer to 64
>[152067.499853] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[152067.499906] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[152067.499961] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[152067.504420] usb usb1: root hub lost power or was reset
>[152067.508309] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[152067.518125] <6>[fglrx] Power up the ASIC
>[152067.518137] <6>[fglrx] Preparing resume fglrx in kernel.
>[152067.542213] <6>[fglrx] Resuming fglrx in kernel completed.
>[152067.542320] <6>[fglrx] IRQ 49 Enabled
>[152067.823042] ata4: SATA link down (SStatus 0 SControl 300)
>[152067.827049] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[152067.834028] ata3: SATA link down (SStatus 0 SControl 300)
>[152067.963135] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[152067.963249] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[152067.972678] ata1.00: configured for UDMA/133
>[152067.972736] sd 0:0:0:0: [sda] Starting disk
>[152068.004198] ata2.00: configured for UDMA/100
>[152068.014682] Extended CMOS year: 2000
>[152068.043046] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[152068.443053] usb 4-2: reset low-speed USB device number 7 using uhci_hcd
>[152068.751823] PM: restore of devices complete after 1256.179 msecs
>[152068.752022] PM: Image restored successfully.
>[152068.752023] Restarting tasks ... done.
>[152068.755296] PM: Basic memory bitmaps freed
>[152068.816780] video LNXVIDEO:00: Restoring backlight state
>[152069.284784] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[152069.290032] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[152069.331124] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[152069.371729] r8169 0000:14:00.0: p3p1: link down
>[152069.371791] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[152078.666968] wlan0: authenticate with 84:1b:5e:02:d5:33
>[152078.668764] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[152078.674081] wlan0: authenticated
>[152078.675046] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[152078.680477] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=4)
>[152078.684851] wlan0: associated
>[152078.684890] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[154684.324247] wlan0: deauthenticated from 84:1b:5e:02:d5:33 (Reason: 7)
>[154684.341175] cfg80211: Calling CRDA to update world regulatory domain
>[154684.347375] cfg80211: World regulatory domain updated:
>[154684.347379] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[154684.347381] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154684.347382] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[154684.347384] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[154684.347386] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154684.347387] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[154684.347400] cfg80211: Calling CRDA for country: SE
>[154684.350235] cfg80211: Regulatory domain changed to country: SE
>[154684.350239] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[154684.350241] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[154684.350242] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[154684.350244] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[154684.350246] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[154687.009121] wlan0: authenticate with 84:1b:5e:02:d5:33
>[154687.013361] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[154687.015237] wlan0: authenticated
>[154687.016023] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[154687.020453] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=4)
>[154687.024206] wlan0: associated
>[160772.820283] device p3p1 entered promiscuous mode
>[161172.329874] device p3p1 left promiscuous mode
>[161185.584326] VirtualBox[10036]: segfault at 642117a8 ip 0000003ae5038f68 sp 00007ffffccc3510 error 4 in libX11.so.6.3.0[3ae5000000+134000]
>[161185.613065] vboxnetflt: dropped 0 out of 0 packets
>[161185.625063] vboxnetflt: dropped 0 out of 2448 packets
>[162352.644459] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[162352.761124] cfg80211: Calling CRDA to update world regulatory domain
>[162352.891549] cfg80211: World regulatory domain updated:
>[162352.891552] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[162352.891555] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[162352.891556] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[162352.891558] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[162352.891560] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[162352.891561] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[162352.891569] cfg80211: Calling CRDA for country: SE
>[162352.893766] cfg80211: Regulatory domain changed to country: SE
>[162352.893769] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[162352.893771] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[162352.893773] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[162352.893774] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[162352.893776] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[162355.056345] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[162355.056350] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[162355.056352] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[162355.056355] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[162355.056366] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[162355.056368] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[162355.056371] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[162355.056373] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[162355.057218] PM: Basic memory bitmaps created
>[162355.057220] PM: Syncing filesystems ... done.
>[162355.559141] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[162355.570219] PM: Preallocating image memory... done (allocated 610096 pages)
>[162356.921588] PM: Allocated 2440384 kbytes in 1.35 seconds (1807.69 MB/s)
>[162356.921590] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[162356.932352] Suspending console(s) (use no_console_suspend to debug)
>[162356.933037] <6>[fglrx] IRQ 49 Disabled
>[162356.933083] <6>[fglrx] Preparing suspend fglrx in kernel.
>[162356.933090] kworker/u:4: page allocation failure: order:10, mode:0x4020
>[162356.933092] Pid: 20068, comm: kworker/u:4 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[162356.933093] Call Trace:
>[162356.933101]  [<ffffffff8113029b>] warn_alloc_failed+0xeb/0x150
>[162356.933104]  [<ffffffff81134126>] __alloc_pages_nodemask+0x736/0x990
>[162356.933186]  [<ffffffffa0448722>] ? firegl_trace+0x72/0x1e0 [fglrx]
>[162356.933219]  [<ffffffffa0448700>] ? firegl_trace+0x50/0x1e0 [fglrx]
>[162356.933223]  [<ffffffff8116fff0>] alloc_pages_current+0xb0/0x120
>[162356.933225]  [<ffffffff8112f1ba>] __get_free_pages+0x2a/0x80
>[162356.933227]  [<ffffffff811775e9>] kmalloc_order_trace+0x39/0xb0
>[162356.933228]  [<ffffffff81179d4a>] __kmalloc+0x16a/0x1a0
>[162356.933250]  [<ffffffffa041898c>] KCL_MEM_SmallBufferAllocAtomic+0x1c/0x30 [fglrx]
>[162356.933275]  [<ffffffffa042c313>] firegl_save_fb+0x233/0x360 [fglrx]
>[162356.933278]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[162356.933304]  [<ffffffffa042b304>] ? firegl_pm_save_framebuffer+0x204/0x300 [fglrx]
>[162356.933330]  [<ffffffffa042e0cd>] ? firegl_cail_powerdown+0x8d/0x240 [fglrx]
>[162356.933356]  [<ffffffffa042c092>] ? libip_suspend+0x22/0x50 [fglrx]
>[162356.933376]  [<ffffffffa0415f87>] ? fglrx_pci_suspend+0x87/0x150 [fglrx]
>[162356.933380]  [<ffffffff8161c5eb>] ? wait_for_common+0x3b/0x170
>[162356.933383]  [<ffffffff813017a6>] ? pci_legacy_suspend+0x46/0xe0
>[162356.933384]  [<ffffffff81302420>] ? pci_pm_resume_noirq+0xd0/0xd0
>[162356.933386]  [<ffffffff813024b5>] ? pci_pm_freeze+0x95/0xb0
>[162356.933389]  [<ffffffff813c9238>] ? dpm_run_callback+0x58/0x90
>[162356.933390]  [<ffffffff813c9c1f>] ? __device_suspend+0xef/0x2b0
>[162356.933392]  [<ffffffff813c9dff>] ? async_suspend+0x1f/0xa0
>[162356.933394]  [<ffffffff81086a18>] ? async_run_entry_fn+0x88/0x190
>[162356.933397]  [<ffffffff81077cb7>] ? process_one_work+0x147/0x4a0
>[162356.933398]  [<ffffffff81076642>] ? need_to_create_worker+0x12/0x30
>[162356.933400]  [<ffffffff81086990>] ? __lowest_in_progress+0x50/0x50
>[162356.933402]  [<ffffffff81079a1e>] ? worker_thread+0x15e/0x480
>[162356.933403]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[162356.933405]  [<ffffffff8107ede3>] ? kthread+0x93/0xa0
>[162356.933408]  [<ffffffff816269c4>] ? kernel_thread_helper+0x4/0x10
>[162356.933409]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[162356.933411]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[162356.933411] Mem-Info:
>[162356.933413] Node 0 DMA per-cpu:
>[162356.933414] CPU    0: hi:    0, btch:   1 usd:   0
>[162356.933415] CPU    1: hi:    0, btch:   1 usd:   0
>[162356.933416] Node 0 DMA32 per-cpu:
>[162356.933417] CPU    0: hi:  186, btch:  31 usd: 158
>[162356.933418] CPU    1: hi:  186, btch:  31 usd: 169
>[162356.933419] Node 0 Normal per-cpu:
>[162356.933420] CPU    0: hi:  186, btch:  31 usd: 180
>[162356.933421] CPU    1: hi:  186, btch:  31 usd: 192
>[162356.933424] active_anon:59139 inactive_anon:30997 isolated_anon:0
>[162356.933424]  active_file:17422 inactive_file:6235 isolated_file:0
>[162356.933424]  unevictable:0 dirty:0 writeback:5970 unstable:0
>[162356.933424]  free:586192 slab_reclaimable:6075 slab_unreclaimable:11028
>[162356.933424]  mapped:32286 shmem:3704 pagetables:7268 bounce:0
>[162356.933429] Node 0 DMA free:15892kB min:256kB low:320kB high:384kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>[162356.933431] lowmem_reserve[]: 0 2957 3965 3965
>[162356.933435] Node 0 DMA32 free:2306848kB min:50208kB low:62760kB high:75312kB active_anon:110272kB inactive_anon:74112kB active_file:27380kB inactive_file:3816kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3028412kB mlocked:0kB dirty:0kB writeback:23880kB mapped:34276kB shmem:5900kB slab_reclaimable:7144kB slab_unreclaimable:5032kB kernel_stack:176kB pagetables:3784kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[162356.933437] lowmem_reserve[]: 0 0 1008 1008
>[162356.933442] Node 0 Normal free:22028kB min:17112kB low:21388kB high:25668kB active_anon:126284kB inactive_anon:49876kB active_file:42308kB inactive_file:21124kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:1032192kB mlocked:0kB dirty:0kB writeback:0kB mapped:94868kB shmem:8916kB slab_reclaimable:17156kB slab_unreclaimable:39072kB kernel_stack:2560kB pagetables:25288kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[162356.933443] lowmem_reserve[]: 0 0 0 0
>[162356.933449] Node 0 DMA: 1*4kB 0*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15892kB
>[162356.933454] Node 0 DMA32: 15258*4kB 14996*8kB 13107*16kB 9981*32kB 6500*64kB 3614*128kB 1547*256kB 423*512kB 77*1024kB 13*2048kB 0*4096kB = 2306776kB
>[162356.933459] Node 0 Normal: 4947*4kB 24*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 22028kB
>[162356.933459] 56470 total pagecache pages
>[162356.933460] 29109 pages in swap cache
>[162356.933461] Swap cache stats: add 110398, delete 81289, find 49967/50945
>[162356.933462] Free swap  = 5871140kB
>[162356.933462] Total swap = 6127612kB
>[162356.947988] 1048560 pages RAM
>[162356.947989] 76505 pages reserved
>[162356.947990] 81874 pages shared
>[162356.947990] 359363 pages non-shared
>[162357.133058] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[162357.311130] <6>[fglrx] Suspending fglrx in kernel completed.
>[162357.311132] <6>[fglrx] Power down the ASIC .
>[162357.347168] PM: freeze of devices complete after 414.810 msecs
>[162357.347387] PM: late freeze of devices complete after 0.216 msecs
>[162357.348274] PM: noirq freeze of devices complete after 0.884 msecs
>[162357.348772] ACPI: Preparing to enter system sleep state S4
>[162357.355184] PM: Saving platform NVS memory
>[162357.356137] Disabling non-boot CPUs ...
>[162357.357407] smpboot: CPU 1 is now offline
>[162357.358014] Extended CMOS year: 2000
>[162357.358082] PM: Creating hibernation image:
>[162357.358402] PM: Need to copy 226673 pages
>[162357.358402] PM: Normal pages needed: 226673 + 1024, available pages: 812792
>[162357.358402] PM: Restoring platform NVS memory
>[162357.358402] Extended CMOS year: 2000
>[162357.358402] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[162357.374586] Enabling non-boot CPUs ...
>[162357.374775] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[162357.387185] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[162357.393021] CPU1 is up
>[162357.394776] ACPI: Waking up from system sleep state S4
>[162357.428094] PM: noirq restore of devices complete after 33.143 msecs
>[162357.428179] PM: early restore of devices complete after 0.055 msecs
>[162357.487596] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[162357.487620] usb usb3: root hub lost power or was reset
>[162357.487632] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[162357.487656] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[162357.487657] usb usb4: root hub lost power or was reset
>[162357.487672] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[162357.487681] usb usb5: root hub lost power or was reset
>[162357.487730] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[162357.487756] usb usb6: root hub lost power or was reset
>[162357.487767] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[162357.487792] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[162357.487793] usb usb7: root hub lost power or was reset
>[162357.487803] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[162357.487828] usb usb8: root hub lost power or was reset
>[162357.487842] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[162357.487856] pci 0000:00:1e.0: setting latency timer to 64
>[162357.487859] usb usb2: root hub lost power or was reset
>[162357.487871] ata_piix 0000:00:1f.2: setting latency timer to 64
>[162357.487883] ata_piix 0000:00:1f.5: setting latency timer to 64
>[162357.491754] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[162357.491806] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[162357.491862] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[162357.500054] usb usb1: root hub lost power or was reset
>[162357.503963] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[162357.520197] <6>[fglrx] Power up the ASIC
>[162357.520209] <6>[fglrx] Preparing resume fglrx in kernel.
>[162357.545085] <6>[fglrx] Resuming fglrx in kernel completed.
>[162357.545188] <6>[fglrx] IRQ 49 Enabled
>[162357.811038] ata4: SATA link down (SStatus 0 SControl 300)
>[162357.822027] ata3: SATA link down (SStatus 0 SControl 300)
>[162357.822060] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[162357.950085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[162357.950216] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[162357.959648] ata1.00: configured for UDMA/133
>[162357.959702] sd 0:0:0:0: [sda] Starting disk
>[162357.991186] ata2.00: configured for UDMA/100
>[162357.998684] Extended CMOS year: 2000
>[162358.038063] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[162358.438836] usb 4-2: reset low-speed USB device number 7 using uhci_hcd
>[162358.747561] PM: restore of devices complete after 1260.035 msecs
>[162358.747853] PM: Image restored successfully.
>[162358.747854] Restarting tasks ... done.
>[162358.754270] PM: Basic memory bitmaps freed
>[162358.814226] video LNXVIDEO:00: Restoring backlight state
>[162361.189221] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[162361.192794] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[162361.235328] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[162361.244734] r8169 0000:14:00.0: p3p1: link down
>[162361.244823] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[162388.077652] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to disable radio.
>[162388.081033] iwlwifi 0000:0e:00.0: Not sending command - RF KILL
>[162388.081068] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[162388.081072] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[162388.088370] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[162388.088374] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[162390.767276] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[162390.770990] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[162390.770994] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[162390.780188] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[162390.780192] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[162393.717233] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[162393.720860] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[162393.764320] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[162399.389384] wlan0: authenticate with 84:1b:5e:02:d5:33
>[162399.398730] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[162399.400602] wlan0: authenticated
>[162399.401183] wlan0: waiting for beacon from 84:1b:5e:02:d5:33
>[162399.411038] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[162399.612026] wlan0: associate with 84:1b:5e:02:d5:33 (try 2/3)
>[162399.623556] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=4)
>[162399.628613] wlan0: associated
>[162399.628677] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[162683.140125] device wlan0 entered promiscuous mode
>[162707.893036] device wlan0 left promiscuous mode
>[163886.233147] device wlan0 entered promiscuous mode
>[164123.177708] device wlan0 left promiscuous mode
>[164165.072046] device wlan0 entered promiscuous mode
>[164616.344441] device wlan0 left promiscuous mode
>[171083.454349] usb 4-2: USB disconnect, device number 7
>[173108.768254] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[184140.750133] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[184140.837403] cfg80211: Calling CRDA to update world regulatory domain
>[184141.227882] cfg80211: World regulatory domain updated:
>[184141.227885] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[184141.227887] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184141.227888] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[184141.227890] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[184141.227892] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184141.227893] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[184141.227901] cfg80211: Calling CRDA for country: SE
>[184141.229820] cfg80211: Regulatory domain changed to country: SE
>[184141.229823] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[184141.229825] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[184141.229826] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[184141.229828] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[184141.229830] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[184143.895096] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[184143.895101] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[184143.895103] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[184143.895106] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[184143.895117] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[184143.895119] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[184143.895122] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[184143.895123] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[184143.895921] PM: Basic memory bitmaps created
>[184143.895922] PM: Syncing filesystems ... done.
>[184144.333859] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[184144.345242] PM: Preallocating image memory... done (allocated 610096 pages)
>[184145.445899] PM: Allocated 2440384 kbytes in 1.10 seconds (2218.53 MB/s)
>[184145.445901] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[184145.457336] Suspending console(s) (use no_console_suspend to debug)
>[184145.457485] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[184145.458014] <6>[fglrx] IRQ 49 Disabled
>[184145.458059] <6>[fglrx] Preparing suspend fglrx in kernel.
>[184145.458067] kworker/u:3: page allocation failure: order:10, mode:0x4020
>[184145.458069] Pid: 27632, comm: kworker/u:3 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[184145.458070] Call Trace:
>[184145.458077]  [<ffffffff8113029b>] warn_alloc_failed+0xeb/0x150
>[184145.458082]  [<ffffffff812d8d43>] ? cpumask_next_and+0x23/0x40
>[184145.458084]  [<ffffffff81134126>] __alloc_pages_nodemask+0x736/0x990
>[184145.458157]  [<ffffffffa0448700>] ? firegl_trace+0x50/0x1e0 [fglrx]
>[184145.458169]  [<ffffffff8116fff0>] alloc_pages_current+0xb0/0x120
>[184145.458171]  [<ffffffff8112f1ba>] __get_free_pages+0x2a/0x80
>[184145.458173]  [<ffffffff811775e9>] kmalloc_order_trace+0x39/0xb0
>[184145.458174]  [<ffffffff81179d4a>] __kmalloc+0x16a/0x1a0
>[184145.458196]  [<ffffffffa041898c>] KCL_MEM_SmallBufferAllocAtomic+0x1c/0x30 [fglrx]
>[184145.458222]  [<ffffffffa042c313>] firegl_save_fb+0x233/0x360 [fglrx]
>[184145.458224]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[184145.458250]  [<ffffffffa042b304>] ? firegl_pm_save_framebuffer+0x204/0x300 [fglrx]
>[184145.458276]  [<ffffffffa042e0cd>] ? firegl_cail_powerdown+0x8d/0x240 [fglrx]
>[184145.458306]  [<ffffffffa042c092>] ? libip_suspend+0x22/0x50 [fglrx]
>[184145.458325]  [<ffffffffa0415f87>] ? fglrx_pci_suspend+0x87/0x150 [fglrx]
>[184145.458329]  [<ffffffff8161c5eb>] ? wait_for_common+0x3b/0x170
>[184145.458331]  [<ffffffff813017a6>] ? pci_legacy_suspend+0x46/0xe0
>[184145.458333]  [<ffffffff81302420>] ? pci_pm_resume_noirq+0xd0/0xd0
>[184145.458334]  [<ffffffff813024b5>] ? pci_pm_freeze+0x95/0xb0
>[184145.458337]  [<ffffffff813c9238>] ? dpm_run_callback+0x58/0x90
>[184145.458339]  [<ffffffff813c9c1f>] ? __device_suspend+0xef/0x2b0
>[184145.458340]  [<ffffffff813c9dff>] ? async_suspend+0x1f/0xa0
>[184145.458343]  [<ffffffff81086a18>] ? async_run_entry_fn+0x88/0x190
>[184145.458345]  [<ffffffff81077cb7>] ? process_one_work+0x147/0x4a0
>[184145.458347]  [<ffffffff81076642>] ? need_to_create_worker+0x12/0x30
>[184145.458348]  [<ffffffff81086990>] ? __lowest_in_progress+0x50/0x50
>[184145.458350]  [<ffffffff81079a1e>] ? worker_thread+0x15e/0x480
>[184145.458351]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[184145.458353]  [<ffffffff8107ede3>] ? kthread+0x93/0xa0
>[184145.458355]  [<ffffffff816269c4>] ? kernel_thread_helper+0x4/0x10
>[184145.458357]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[184145.458358]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[184145.458359] Mem-Info:
>[184145.458360] Node 0 DMA per-cpu:
>[184145.458361] CPU    0: hi:    0, btch:   1 usd:   0
>[184145.458362] CPU    1: hi:    0, btch:   1 usd:   0
>[184145.458363] Node 0 DMA32 per-cpu:
>[184145.458364] CPU    0: hi:  186, btch:  31 usd: 181
>[184145.458365] CPU    1: hi:  186, btch:  31 usd: 176
>[184145.458366] Node 0 Normal per-cpu:
>[184145.458367] CPU    0: hi:  186, btch:  31 usd: 143
>[184145.458368] CPU    1: hi:  186, btch:  31 usd: 176
>[184145.458371] active_anon:40227 inactive_anon:26014 isolated_anon:0
>[184145.458371]  active_file:76509 inactive_file:52757 isolated_file:0
>[184145.458371]  unevictable:0 dirty:0 writeback:0 unstable:0
>[184145.458371]  free:424318 slab_reclaimable:10798 slab_unreclaimable:10386
>[184145.458371]  mapped:24425 shmem:1435 pagetables:6539 bounce:0
>[184145.458375] Node 0 DMA free:15892kB min:256kB low:320kB high:384kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15644kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:0kB slab_unreclaimable:8kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
>[184145.458377] lowmem_reserve[]: 0 2957 3965 3965
>[184145.458381] Node 0 DMA32 free:1660072kB min:50208kB low:62760kB high:75312kB active_anon:90880kB inactive_anon:34376kB active_file:234084kB inactive_file:167024kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:3028412kB mlocked:0kB dirty:0kB writeback:0kB mapped:22504kB shmem:1280kB slab_reclaimable:25084kB slab_unreclaimable:5940kB kernel_stack:304kB pagetables:2868kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[184145.458383] lowmem_reserve[]: 0 0 1008 1008
>[184145.458387] Node 0 Normal free:21308kB min:17112kB low:21388kB high:25668kB active_anon:70028kB inactive_anon:69680kB active_file:71952kB inactive_file:44004kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:1032192kB mlocked:0kB dirty:0kB writeback:0kB mapped:75196kB shmem:4460kB slab_reclaimable:18108kB slab_unreclaimable:35596kB kernel_stack:2256kB pagetables:23288kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
>[184145.458389] lowmem_reserve[]: 0 0 0 0
>[184145.458394] Node 0 DMA: 1*4kB 0*8kB 1*16kB 0*32kB 2*64kB 1*128kB 1*256kB 0*512kB 1*1024kB 1*2048kB 3*4096kB = 15892kB
>[184145.458399] Node 0 DMA32: 47726*4kB 32692*8kB 18726*16kB 9979*32kB 4127*64kB 1225*128kB 375*256kB 76*512kB 20*1024kB 6*2048kB 0*4096kB = 1659992kB
>[184145.458404] Node 0 Normal: 4819*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 1*2048kB 0*4096kB = 21324kB
>[184145.458404] 143946 total pagecache pages
>[184145.458405] 13321 pages in swap cache
>[184145.458406] Swap cache stats: add 127626, delete 114305, find 69455/71109
>[184145.458407] Free swap  = 5941888kB
>[184145.458407] Total swap = 6127612kB
>[184145.472916] 1048560 pages RAM
>[184145.472917] 72735 pages reserved
>[184145.472918] 99292 pages shared
>[184145.472918] 500178 pages non-shared
>[184145.833459] <6>[fglrx] Suspending fglrx in kernel completed.
>[184145.833461] <6>[fglrx] Power down the ASIC .
>[184145.872107] PM: freeze of devices complete after 414.765 msecs
>[184145.872325] PM: late freeze of devices complete after 0.216 msecs
>[184145.873211] PM: noirq freeze of devices complete after 0.883 msecs
>[184145.873703] ACPI: Preparing to enter system sleep state S4
>[184145.882037] PM: Saving platform NVS memory
>[184145.882994] Disabling non-boot CPUs ...
>[184145.884286] smpboot: CPU 1 is now offline
>[184145.884894] Extended CMOS year: 2000
>[184145.884963] PM: Creating hibernation image:
>[184145.885281] PM: Need to copy 307764 pages
>[184145.885281] PM: Normal pages needed: 307764 + 1024, available pages: 731701
>[184145.885281] PM: Restoring platform NVS memory
>[184145.885281] Extended CMOS year: 2000
>[184145.885281] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[184145.890173] Enabling non-boot CPUs ...
>[184145.890261] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[184145.903004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[184145.908021] CPU1 is up
>[184145.909775] ACPI: Waking up from system sleep state S4
>[184145.943088] PM: noirq restore of devices complete after 33.132 msecs
>[184145.943172] PM: early restore of devices complete after 0.054 msecs
>[184146.020998] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[184146.021032] usb usb3: root hub lost power or was reset
>[184146.021044] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[184146.021068] usb usb4: root hub lost power or was reset
>[184146.021079] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[184146.021102] usb usb5: root hub lost power or was reset
>[184146.021114] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[184146.021133] usb usb1: root hub lost power or was reset
>[184146.022119] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[184146.023052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[184146.023076] usb usb6: root hub lost power or was reset
>[184146.023087] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[184146.023110] usb usb7: root hub lost power or was reset
>[184146.023120] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[184146.023143] usb usb8: root hub lost power or was reset
>[184146.023156] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[184146.023172] usb usb2: root hub lost power or was reset
>[184146.025027] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[184146.025037] pci 0000:00:1e.0: setting latency timer to 64
>[184146.025051] ata_piix 0000:00:1f.2: setting latency timer to 64
>[184146.025064] ata_piix 0000:00:1f.5: setting latency timer to 64
>[184146.027074] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[184146.027125] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[184146.027175] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[184146.051553] <6>[fglrx] Power up the ASIC
>[184146.051565] <6>[fglrx] Preparing resume fglrx in kernel.
>[184146.076186] <6>[fglrx] Resuming fglrx in kernel completed.
>[184146.076289] <6>[fglrx] IRQ 49 Enabled
>[184146.353072] ata3: SATA link down (SStatus 0 SControl 300)
>[184146.364041] ata4: SATA link down (SStatus 0 SControl 300)
>[184146.364080] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[184146.487082] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[184146.488076] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[184146.496699] ata1.00: configured for UDMA/133
>[184146.496754] sd 0:0:0:0: [sda] Starting disk
>[184146.529255] ata2.00: configured for UDMA/100
>[184146.580144] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[184146.737491] PM: restore of devices complete after 716.591 msecs
>[184146.737681] PM: Image restored successfully.
>[184146.737682] Restarting tasks ... done.
>[184146.739476] PM: Basic memory bitmaps freed
>[184146.739623] video LNXVIDEO:00: Restoring backlight state
>[184149.090789] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[184149.094617] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[184149.135910] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[184149.144726] r8169 0000:14:00.0: p3p1: link down
>[184149.144790] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[184155.383161] wlan0: authenticate with 84:1b:5e:02:d5:33
>[184155.388046] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[184155.389864] wlan0: authenticated
>[184155.391041] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[184155.396298] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=3)
>[184155.407879] wlan0: associated
>[184155.407923] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[184163.374329] usb 4-2: new low-speed USB device number 8 using uhci_hcd
>[184163.537389] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[184163.537400] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[184163.537407] usb 4-2: Product: USB Laser Mouse
>[184163.537414] usb 4-2: Manufacturer: Logitech
>[184163.558497] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input18
>[184163.559468] hid-generic 0003:046D:C062.0007: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[192491.724574] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[192491.763154] cfg80211: Calling CRDA to update world regulatory domain
>[192492.145117] cfg80211: World regulatory domain updated:
>[192492.145120] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192492.145122] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192492.145124] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192492.145126] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192492.145127] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192492.145129] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192492.145136] cfg80211: Calling CRDA for country: SE
>[192492.147011] cfg80211: Regulatory domain changed to country: SE
>[192492.147013] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192492.147015] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192492.147017] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192492.147018] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192492.147020] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192494.326216] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[192494.326221] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[192494.326223] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[192494.326226] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[192494.326236] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[192494.326238] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[192494.326240] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[192494.326242] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[192494.327053] PM: Basic memory bitmaps created
>[192494.327054] PM: Syncing filesystems ... done.
>[192494.695840] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[192494.707208] PM: Preallocating image memory... done (allocated 381429 pages)
>[192494.929572] PM: Allocated 1525716 kbytes in 0.22 seconds (6935.07 MB/s)
>[192494.929574] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[192494.940342] Suspending console(s) (use no_console_suspend to debug)
>[192494.940596] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[192494.941073] <6>[fglrx] IRQ 49 Disabled
>[192494.941130] <6>[fglrx] Preparing suspend fglrx in kernel.
>[192495.304364] <6>[fglrx] Suspending fglrx in kernel completed.
>[192495.304365] <6>[fglrx] Power down the ASIC .
>[192495.355165] PM: freeze of devices complete after 414.816 msecs
>[192495.355386] PM: late freeze of devices complete after 0.219 msecs
>[192495.356272] PM: noirq freeze of devices complete after 0.883 msecs
>[192495.356809] ACPI: Preparing to enter system sleep state S4
>[192495.365123] PM: Saving platform NVS memory
>[192495.366088] Disabling non-boot CPUs ...
>[192495.367366] smpboot: CPU 1 is now offline
>[192495.368270] Extended CMOS year: 2000
>[192495.368338] PM: Creating hibernation image:
>[192495.369009] PM: Need to copy 381835 pages
>[192495.369009] PM: Normal pages needed: 381835 + 1024, available pages: 657630
>[192495.369009] PM: Restoring platform NVS memory
>[192495.369009] Extended CMOS year: 2000
>[192495.369009] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[192495.373554] Enabling non-boot CPUs ...
>[192495.373676] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[192495.386085] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[192495.391018] CPU1 is up
>[192495.392784] ACPI: Waking up from system sleep state S4
>[192495.426092] PM: noirq restore of devices complete after 33.136 msecs
>[192495.426177] PM: early restore of devices complete after 0.055 msecs
>[192495.522132] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[192495.522156] usb usb3: root hub lost power or was reset
>[192495.522168] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[192495.522189] usb usb4: root hub lost power or was reset
>[192495.522201] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[192495.522224] usb usb5: root hub lost power or was reset
>[192495.522236] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[192495.522256] usb usb1: root hub lost power or was reset
>[192495.522520] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[192495.522593] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[192495.522617] usb usb6: root hub lost power or was reset
>[192495.522628] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[192495.522651] usb usb7: root hub lost power or was reset
>[192495.522662] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[192495.522685] usb usb8: root hub lost power or was reset
>[192495.522698] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[192495.522714] usb usb2: root hub lost power or was reset
>[192495.526143] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[192495.526153] pci 0000:00:1e.0: setting latency timer to 64
>[192495.526167] ata_piix 0000:00:1f.2: setting latency timer to 64
>[192495.526179] ata_piix 0000:00:1f.5: setting latency timer to 64
>[192495.526602] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[192495.526653] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[192495.526704] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[192495.552785] <6>[fglrx] Power up the ASIC
>[192495.552797] <6>[fglrx] Preparing resume fglrx in kernel.
>[192495.577198] <6>[fglrx] Resuming fglrx in kernel completed.
>[192495.577302] <6>[fglrx] IRQ 49 Enabled
>[192495.846028] ata4: SATA link down (SStatus 0 SControl 300)
>[192495.854049] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[192495.856993] ata3: SATA link down (SStatus 0 SControl 300)
>[192495.986103] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[192495.986227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[192495.995698] ata1.00: configured for UDMA/133
>[192495.995755] sd 0:0:0:0: [sda] Starting disk
>[192496.027260] ata2.00: configured for UDMA/100
>[192496.070038] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[192496.227541] PM: restore of devices complete after 705.462 msecs
>[192496.227698] PM: Image restored successfully.
>[192496.228144] usb 4-2: USB disconnect, device number 8
>[192496.227699] Restarting tasks ... done.
>[192496.235028] PM: Basic memory bitmaps freed
>[192496.235243] video LNXVIDEO:00: Restoring backlight state
>[192496.368344] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[192496.372598] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[192496.414296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[192496.423861] r8169 0000:14:00.0: p3p1: link down
>[192496.424179] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[192754.563069] wlan0: authenticate with 00:15:6d:4c:46:96
>[192754.566829] wlan0: send auth to 00:15:6d:4c:46:96 (try 1/3)
>[192754.767012] wlan0: send auth to 00:15:6d:4c:46:96 (try 2/3)
>[192754.968010] wlan0: send auth to 00:15:6d:4c:46:96 (try 3/3)
>[192754.971074] wlan0: authenticated
>[192754.972041] wlan0: associate with 00:15:6d:4c:46:96 (try 1/3)
>[192754.978921] wlan0: RX AssocResp from 00:15:6d:4c:46:96 (capab=0x421 status=0 aid=2)
>[192754.981164] wlan0: associated
>[192754.981186] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[192803.887679] wlan0: deauthenticating from 00:15:6d:4c:46:96 by local choice (reason=3)
>[192803.918373] cfg80211: Calling CRDA to update world regulatory domain
>[192803.959090] cfg80211: World regulatory domain updated:
>[192803.959094] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192803.959097] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192803.959098] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192803.959100] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192803.959102] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192803.959103] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192803.959118] cfg80211: Calling CRDA for country: SE
>[192803.961203] cfg80211: Regulatory domain changed to country: SE
>[192803.961206] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192803.961208] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192803.961209] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192803.961211] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192803.961212] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192806.626196] wlan0: authenticate with 00:17:9a:61:db:17
>[192806.630163] wlan0: direct probe to 00:17:9a:61:db:17 (try 1/3)
>[192806.831058] wlan0: direct probe to 00:17:9a:61:db:17 (try 2/3)
>[192807.032055] wlan0: direct probe to 00:17:9a:61:db:17 (try 3/3)
>[192807.233030] wlan0: authentication with 00:17:9a:61:db:17 timed out
>[192809.922924] wlan0: authenticate with 00:17:9a:61:db:17
>[192809.924472] wlan0: direct probe to 00:17:9a:61:db:17 (try 1/3)
>[192810.125058] wlan0: direct probe to 00:17:9a:61:db:17 (try 2/3)
>[192810.326061] wlan0: direct probe to 00:17:9a:61:db:17 (try 3/3)
>[192810.527057] wlan0: authentication with 00:17:9a:61:db:17 timed out
>[192813.158768] wlan0: authenticate with 00:17:9a:61:db:17
>[192813.161056] wlan0: direct probe to 00:17:9a:61:db:17 (try 1/3)
>[192813.362048] wlan0: direct probe to 00:17:9a:61:db:17 (try 2/3)
>[192813.563045] wlan0: direct probe to 00:17:9a:61:db:17 (try 3/3)
>[192813.764032] wlan0: authentication with 00:17:9a:61:db:17 timed out
>[192824.096890] wlan0: authenticate with 00:17:9a:61:db:17
>[192824.100456] wlan0: direct probe to 00:17:9a:61:db:17 (try 1/3)
>[192824.301050] wlan0: direct probe to 00:17:9a:61:db:17 (try 2/3)
>[192824.502058] wlan0: direct probe to 00:17:9a:61:db:17 (try 3/3)
>[192824.703058] wlan0: authentication with 00:17:9a:61:db:17 timed out
>[192827.271605] wlan0: authenticate with 00:17:9a:61:db:17
>[192827.273506] wlan0: direct probe to 00:17:9a:61:db:17 (try 1/3)
>[192827.474015] wlan0: direct probe to 00:17:9a:61:db:17 (try 2/3)
>[192827.675010] wlan0: direct probe to 00:17:9a:61:db:17 (try 3/3)
>[192827.876012] wlan0: authentication with 00:17:9a:61:db:17 timed out
>[192834.700647] wlan0: authenticate with 00:15:6d:4c:46:96
>[192834.704082] wlan0: send auth to 00:15:6d:4c:46:96 (try 1/3)
>[192834.905077] wlan0: send auth to 00:15:6d:4c:46:96 (try 2/3)
>[192834.906942] wlan0: authenticated
>[192834.908035] wlan0: associate with 00:15:6d:4c:46:96 (try 1/3)
>[192834.912572] wlan0: RX AssocResp from 00:15:6d:4c:46:96 (capab=0x421 status=0 aid=1)
>[192834.915071] wlan0: associated
>[192848.059043] wlan0: deauthenticating from 00:15:6d:4c:46:96 by local choice (reason=3)
>[192848.085716] cfg80211: Calling CRDA to update world regulatory domain
>[192848.126500] cfg80211: World regulatory domain updated:
>[192848.126503] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192848.126505] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192848.126507] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192848.126509] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192848.126511] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192848.126512] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192848.126528] cfg80211: Calling CRDA for country: SE
>[192848.128847] cfg80211: Regulatory domain changed to country: SE
>[192848.128849] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192848.128851] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192848.128853] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192848.128854] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192848.128856] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192877.036872] wlan0: authenticate with d8:c7:c8:6a:08:60
>[192877.040713] wlan0: send auth to d8:c7:c8:6a:08:60 (try 1/3)
>[192877.042604] wlan0: authenticated
>[192877.081017] wlan0: associate with d8:c7:c8:6a:08:60 (try 1/3)
>[192877.085975] wlan0: RX AssocResp from d8:c7:c8:6a:08:60 (capab=0x431 status=0 aid=2)
>[192877.087553] wlan0: associated
>[192877.493832] wlan0: deauthenticating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192877.504888] cfg80211: Calling CRDA to update world regulatory domain
>[192877.525789] cfg80211: World regulatory domain updated:
>[192877.525793] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192877.525795] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192877.525797] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192877.525798] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192877.525800] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192877.525802] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192877.525822] cfg80211: Calling CRDA for country: SE
>[192877.528114] cfg80211: Regulatory domain changed to country: SE
>[192877.528118] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192877.528120] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192877.528121] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192877.528123] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192877.528125] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192981.569641] wlan0: authenticate with d8:c7:c8:6a:08:60
>[192981.572914] wlan0: send auth to d8:c7:c8:6a:08:60 (try 1/3)
>[192981.574842] wlan0: authenticated
>[192981.575024] wlan0: associate with d8:c7:c8:6a:08:60 (try 1/3)
>[192981.580386] wlan0: RX AssocResp from d8:c7:c8:6a:08:60 (capab=0x431 status=0 aid=2)
>[192981.582112] wlan0: associated
>[192984.894301] wlan0: disassociating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192984.906365] cfg80211: Calling CRDA to update world regulatory domain
>[192984.907478] wlan0: deauthenticating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192984.940282] cfg80211: World regulatory domain updated:
>[192984.940286] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192984.940287] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192984.940289] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192984.940291] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192984.940292] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192984.940294] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192984.940309] cfg80211: Calling CRDA for country: SE
>[192984.942117] cfg80211: Regulatory domain changed to country: SE
>[192984.942120] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192984.942122] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192984.942123] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192984.942125] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192984.942127] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192988.488106] wlan0: authenticate with d8:c7:c8:6a:08:60
>[192988.491313] wlan0: send auth to d8:c7:c8:6a:08:60 (try 1/3)
>[192988.493834] wlan0: authenticated
>[192988.495035] wlan0: associate with d8:c7:c8:6a:08:60 (try 1/3)
>[192988.499848] wlan0: RX AssocResp from d8:c7:c8:6a:08:60 (capab=0x431 status=0 aid=2)
>[192988.501655] wlan0: associated
>[192991.609431] wlan0: disassociating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192991.620573] cfg80211: Calling CRDA to update world regulatory domain
>[192991.621751] wlan0: deauthenticating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192991.641945] cfg80211: World regulatory domain updated:
>[192991.641948] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192991.641950] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192991.641952] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192991.641954] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192991.641955] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192991.641957] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192991.641971] cfg80211: Calling CRDA for country: SE
>[192991.643781] cfg80211: Regulatory domain changed to country: SE
>[192991.643783] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192991.643785] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192991.643787] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192991.643788] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192991.643790] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[192995.264109] wlan0: authenticate with d8:c7:c8:6a:08:60
>[192995.265978] wlan0: send auth to d8:c7:c8:6a:08:60 (try 1/3)
>[192995.267917] wlan0: authenticated
>[192995.269022] wlan0: associate with d8:c7:c8:6a:08:60 (try 1/3)
>[192995.273733] wlan0: RX AssocResp from d8:c7:c8:6a:08:60 (capab=0x431 status=0 aid=2)
>[192995.279249] wlan0: associated
>[192998.652406] wlan0: disassociating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192998.665833] cfg80211: Calling CRDA to update world regulatory domain
>[192998.666111] wlan0: deauthenticating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[192998.689487] cfg80211: World regulatory domain updated:
>[192998.689491] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192998.689492] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192998.689494] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192998.689496] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[192998.689497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192998.689499] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[192998.689511] cfg80211: Calling CRDA for country: SE
>[192998.691221] cfg80211: Regulatory domain changed to country: SE
>[192998.691223] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[192998.691225] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192998.691226] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192998.691228] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[192998.691229] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[193002.190929] wlan0: authenticate with d8:c7:c8:6a:08:60
>[193002.193048] wlan0: send auth to d8:c7:c8:6a:08:60 (try 1/3)
>[193002.195071] wlan0: authenticated
>[193002.196036] wlan0: associate with d8:c7:c8:6a:08:60 (try 1/3)
>[193002.200828] wlan0: RX AssocResp from d8:c7:c8:6a:08:60 (capab=0x431 status=0 aid=2)
>[193002.205133] wlan0: associated
>[193004.004276] wlan0: deauthenticating from d8:c7:c8:6a:08:60 by local choice (reason=3)
>[193004.021265] cfg80211: Calling CRDA to update world regulatory domain
>[193004.046021] cfg80211: World regulatory domain updated:
>[193004.046025] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193004.046027] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193004.046029] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193004.046031] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193004.046032] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193004.046034] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193004.046053] cfg80211: Calling CRDA for country: SE
>[193004.048224] cfg80211: Regulatory domain changed to country: SE
>[193004.048227] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193004.048229] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193004.048230] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193004.048232] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193004.048234] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[193013.679765] wlan0: authenticate with 00:15:6d:4c:46:96
>[193013.683848] wlan0: send auth to 00:15:6d:4c:46:96 (try 1/3)
>[193013.688435] wlan0: authenticated
>[193013.690057] wlan0: associate with 00:15:6d:4c:46:96 (try 1/3)
>[193013.891063] wlan0: associate with 00:15:6d:4c:46:96 (try 2/3)
>[193013.896059] wlan0: RX AssocResp from 00:15:6d:4c:46:96 (capab=0x421 status=0 aid=1)
>[193013.898230] wlan0: associated
>[193025.024307] wlan0: deauthenticating from 00:15:6d:4c:46:96 by local choice (reason=3)
>[193025.052331] cfg80211: Calling CRDA to update world regulatory domain
>[193025.082931] cfg80211: World regulatory domain updated:
>[193025.082935] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193025.082937] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193025.082939] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193025.082940] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193025.082942] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193025.082943] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193025.082961] cfg80211: Calling CRDA for country: SE
>[193025.084816] cfg80211: Regulatory domain changed to country: SE
>[193025.084819] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193025.084821] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193025.084822] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193025.084824] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193025.084826] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[193037.224057] wlan0: authenticate with 00:20:a6:5f:a1:26
>[193037.227680] wlan0: send auth to 00:20:a6:5f:a1:26 (try 1/3)
>[193037.230790] wlan0: authenticated
>[193037.230951] iwlwifi 0000:0e:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[193037.231030] wlan0: associate with 00:20:a6:5f:a1:26 (try 1/3)
>[193037.432058] wlan0: associate with 00:20:a6:5f:a1:26 (try 2/3)
>[193037.434352] wlan0: RX AssocResp from 00:20:a6:5f:a1:26 (capab=0x421 status=0 aid=1)
>[193037.437934] wlan0: associated
>[193100.493273] wlan0: deauthenticating from 00:20:a6:5f:a1:26 by local choice (reason=3)
>[193100.573191] cfg80211: Calling CRDA to update world regulatory domain
>[193100.613390] cfg80211: World regulatory domain updated:
>[193100.613393] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193100.613395] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193100.613396] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193100.613398] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[193100.613400] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193100.613401] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[193100.613418] cfg80211: Calling CRDA for country: SE
>[193100.619476] cfg80211: Regulatory domain changed to country: SE
>[193100.619479] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[193100.619480] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193100.619482] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193100.619484] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[193100.619486] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[193251.454582] PM: Syncing filesystems ... done.
>[193251.459719] PM: Preparing system for mem sleep
>[193251.459735] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[193251.471142] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[193251.482165] PM: Entering mem sleep
>[193251.482220] Suspending console(s) (use no_console_suspend to debug)
>[193251.484523] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[193251.562618] sd 0:0:0:0: [sda] Stopping disk
>[193251.585566] <6>[fglrx] IRQ 49 Disabled
>[193251.585596] <6>[fglrx] Preparing suspend fglrx in kernel.
>[193251.949529] <6>[fglrx] Suspending fglrx in kernel completed.
>[193251.949530] <6>[fglrx] Power down the ASIC .
>[193252.573184] PM: suspend of devices complete after 1090.737 msecs
>[193252.573395] PM: late suspend of devices complete after 0.208 msecs
>[193252.573643] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[193252.617129] PM: noirq suspend of devices complete after 43.731 msecs
>[193252.617632] ACPI: Preparing to enter system sleep state S3
>[193252.617800] PM: Saving platform NVS memory
>[193252.618782] Disabling non-boot CPUs ...
>[193252.620083] smpboot: CPU 1 is now offline
>[193252.620993] Extended CMOS year: 2000
>[193252.620993] ACPI: Low-level resume complete
>[193252.620993] PM: Restoring platform NVS memory
>[193252.620993] Extended CMOS year: 2000
>[193252.620993] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[193252.626283] Enabling non-boot CPUs ...
>[193252.626378] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[193252.641584] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[193252.646411] CPU1 is up
>[193252.648288] ACPI: Waking up from system sleep state S3
>[193252.648568] ------------[ cut here ]------------
>[193252.648573] WARNING: at kernel/irq/manage.c:1211 __free_irq+0xa3/0x220()
>[193252.648574] Hardware name:         
>[193252.648575] Trying to free already-free IRQ 16
>[193252.648610] Modules linked in: nfnetlink_log nfnetlink fuse vboxpci(O) vboxnetadp(O) vboxnetflt(O) bnep bluetooth vboxdrv(O) ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media ir_lirc_codec lirc_dev coretemp snd_hda_codec_hdmi ir_mce_kbd_decoder arc4 snd_hda_codec_realtek ir_sanyo_decoder iwldvm kvm_intel snd_hda_intel ir_sony_decoder mac80211 iTCO_wdt ir_jvc_decoder fglrx(PO) kvm r8169 snd_hda_codec compal_laptop iTCO_vendor_support ir_rc6_decoder iwlwifi snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer ir_rc5_decoder jmb38x_ms mii snd soundcore microcode cfg80211 ir_nec_decoder lpc_ich i2c_i801 memstick mfd_core rfkill rc_rc6_mce ene_ir rc_core amd_iommu_v2 binfmt_misc uinput sdhci_pci sdhci mmc_core video radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core
>[193252.648620] Pid: 17221, comm: kworker/0:4 Tainted: P        WC O 3.6.6-1.fc17.x86_64 #1
>[193252.648620] Call Trace:
>[193252.648625]  [<ffffffff8105b8ef>] warn_slowpath_common+0x7f/0xc0
>[193252.648627]  [<ffffffff8105b9e6>] warn_slowpath_fmt+0x46/0x50
>[193252.648629]  [<ffffffff810e7ca3>] __free_irq+0xa3/0x220
>[193252.648630]  [<ffffffff810e7e74>] free_irq+0x54/0xc0
>[193252.648636]  [<ffffffffa01a4300>] sdhci_remove_host+0x60/0x160 [sdhci]
>[193252.648640]  [<ffffffffa0199c92>] sdhci_pci_remove_slot+0x3e/0x8b [sdhci_pci]
>[193252.648644]  [<ffffffffa0199d2d>] sdhci_pci_remove+0x4e/0x78 [sdhci_pci]
>[193252.648647]  [<ffffffff8130318f>] pci_device_remove+0x3f/0x110
>[193252.648652]  [<ffffffff813c185c>] __device_release_driver+0x7c/0xe0
>[193252.648653]  [<ffffffff813c1b9c>] device_release_driver+0x2c/0x40
>[193252.648655]  [<ffffffff813c12fe>] bus_remove_device+0xee/0x160
>[193252.648657]  [<ffffffff813be71a>] device_del+0x12a/0x1c0
>[193252.648659]  [<ffffffff813be7d2>] device_unregister+0x22/0x60
>[193252.648661]  [<ffffffff812fc6f4>] pci_stop_bus_device+0x94/0xa0
>[193252.648664]  [<ffffffff813150a5>] acpiphp_disable_slot+0x195/0x200
>[193252.648666]  [<ffffffff81313b82>] ? get_slot_status+0x92/0xc0
>[193252.648667]  [<ffffffff8131513d>] acpiphp_check_bridge.isra.16+0x2d/0xf0
>[193252.648669]  [<ffffffff813157fb>] _handle_hotplug_event_bridge+0x36b/0x4d0
>[193252.648671]  [<ffffffff81315490>] ? _handle_hotplug_event_func+0x1d0/0x1d0
>[193252.648674]  [<ffffffff8107a41f>] ? queue_work+0x1f/0x30
>[193252.648676]  [<ffffffff81179a99>] ? kfree+0x49/0x160
>[193252.648678]  [<ffffffff813384df>] ? acpi_os_release_object+0xe/0x12
>[193252.648680]  [<ffffffff81077cb7>] process_one_work+0x147/0x4a0
>[193252.648682]  [<ffffffff81315490>] ? _handle_hotplug_event_func+0x1d0/0x1d0
>[193252.648684]  [<ffffffff81079a1e>] worker_thread+0x15e/0x480
>[193252.648685]  [<ffffffff810798c0>] ? manage_workers+0x2f0/0x2f0
>[193252.648687]  [<ffffffff8107ede3>] kthread+0x93/0xa0
>[193252.648690]  [<ffffffff816269c4>] kernel_thread_helper+0x4/0x10
>[193252.648692]  [<ffffffff8107ed50>] ? kthread_freezable_should_stop+0x70/0x70
>[193252.648693]  [<ffffffff816269c0>] ? gs_change+0x13/0x13
>[193252.648694] ---[ end trace bcf49c0bc5942dab ]---
>[193252.737247] PM: noirq resume of devices complete after 88.328 msecs
>[193252.737333] PM: early resume of devices complete after 0.053 msecs
>[193252.737395] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[193252.737419] usb usb3: root hub lost power or was reset
>[193252.737432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[193252.737453] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[193252.737455] usb usb4: root hub lost power or was reset
>[193252.737468] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[193252.737479] usb usb5: root hub lost power or was reset
>[193252.737497] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[193252.737529] usb usb6: root hub lost power or was reset
>[193252.737542] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[193252.737577] usb usb7: root hub lost power or was reset
>[193252.737590] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[193252.737623] usb usb8: root hub lost power or was reset
>[193252.737640] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[193252.737665] pci 0000:00:1e.0: setting latency timer to 64
>[193252.737678] ata_piix 0000:00:1f.2: setting latency timer to 64
>[193252.737684] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[193252.737689] ata_piix 0000:00:1f.5: setting latency timer to 64
>[193252.737817] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[193252.737900] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[193252.740230] <6>[fglrx] Power up the ASIC
>[193252.740241] <6>[fglrx] Preparing resume fglrx in kernel.
>[193252.764915] <6>[fglrx] Resuming fglrx in kernel completed.
>[193252.765035] <6>[fglrx] IRQ 49 Enabled
>[193252.964107] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[193253.057039] ata4: SATA link down (SStatus 0 SControl 300)
>[193253.068030] ata3: SATA link down (SStatus 0 SControl 300)
>[193253.180114] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[193253.197121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[193253.257236] ata2.00: configured for UDMA/100
>[193257.328185] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[193257.581816] ata1.00: configured for UDMA/133
>[193257.581877] sd 0:0:0:0: [sda] Starting disk
>[193257.592848] Extended CMOS year: 2000
>[193257.607131] PM: resume of devices complete after 4869.794 msecs
>[193257.607303] PM: Finishing wakeup.
>[193257.607304] Restarting tasks ... done.
>[193257.675276] video LNXVIDEO:00: Restoring backlight state
>[193257.799247] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[193257.806834] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[193257.846447] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[193257.856566] r8169 0000:14:00.0: p3p1: link down
>[193257.862026] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[193284.784854] wlan0: authenticate with 00:15:e9:e1:0c:db
>[193284.789580] wlan0: send auth to 00:15:e9:e1:0c:db (try 1/3)
>[193284.990049] wlan0: send auth to 00:15:e9:e1:0c:db (try 2/3)
>[193285.191060] wlan0: send auth to 00:15:e9:e1:0c:db (try 3/3)
>[193285.392055] wlan0: authentication with 00:15:e9:e1:0c:db timed out
>[193295.794701] wlan0: authenticate with 00:15:e9:e1:0c:db
>[193295.796150] wlan0: direct probe to 00:15:e9:e1:0c:db (try 1/3)
>[193295.997034] wlan0: direct probe to 00:15:e9:e1:0c:db (try 2/3)
>[193296.198052] wlan0: direct probe to 00:15:e9:e1:0c:db (try 3/3)
>[193296.399058] wlan0: authentication with 00:15:e9:e1:0c:db timed out
>[193306.273049] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to disable radio.
>[193306.277027] iwlwifi 0000:0e:00.0: Not sending command - RF KILL
>[193306.293916] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[193306.293921] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[193306.337159] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[193306.337164] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[193315.443730] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[193315.463913] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[193315.463917] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[193315.495314] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[193315.495319] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[193317.715657] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[193317.719092] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[193317.761889] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[193346.572288] wlan0: authenticate with 00:1d:a2:c9:cf:40
>[193346.576983] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 1/3)
>[193346.778026] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 2/3)
>[193346.979051] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 3/3)
>[193347.180052] wlan0: authentication with 00:1d:a2:c9:cf:40 timed out
>[193347.307372] wlan0: authenticate with 00:1f:9e:80:49:30
>[193347.311195] wlan0: direct probe to 00:1f:9e:80:49:30 (try 1/3)
>[193347.512059] wlan0: direct probe to 00:1f:9e:80:49:30 (try 2/3)
>[193347.713037] wlan0: direct probe to 00:1f:9e:80:49:30 (try 3/3)
>[193347.914057] wlan0: authentication with 00:1f:9e:80:49:30 timed out
>[193350.675126] wlan0: authenticate with 00:1f:9e:80:49:30
>[193350.677601] wlan0: direct probe to 00:1f:9e:80:49:30 (try 1/3)
>[193350.878061] wlan0: direct probe to 00:1f:9e:80:49:30 (try 2/3)
>[193351.079059] wlan0: direct probe to 00:1f:9e:80:49:30 (try 3/3)
>[193351.280027] wlan0: authentication with 00:1f:9e:80:49:30 timed out
>[193359.067815] wlan0: authenticate with 00:1d:a2:c9:cf:40
>[193359.074499] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 1/3)
>[193359.275057] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 2/3)
>[193359.476052] wlan0: direct probe to 00:1d:a2:c9:cf:40 (try 3/3)
>[193359.677057] wlan0: authentication with 00:1d:a2:c9:cf:40 timed out
>[193521.746920] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to disable radio.
>[193521.750068] iwlwifi 0000:0e:00.0: Not sending command - RF KILL
>[193521.750540] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[193521.750547] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[193521.757403] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[193521.757407] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[195765.450774] PM: Syncing filesystems ... done.
>[195765.457068] PM: Preparing system for mem sleep
>[195765.457082] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[195765.468197] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[195765.479155] PM: Entering mem sleep
>[195765.479208] Suspending console(s) (use no_console_suspend to debug)
>[195765.479596] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[195765.579054] <6>[fglrx] IRQ 49 Disabled
>[195765.579087] <6>[fglrx] Preparing suspend fglrx in kernel.
>[195765.597217] sd 0:0:0:0: [sda] Stopping disk
>[195765.943367] <6>[fglrx] Suspending fglrx in kernel completed.
>[195765.943368] <6>[fglrx] Power down the ASIC .
>[195766.607152] PM: suspend of devices complete after 1127.718 msecs
>[195766.607365] PM: late suspend of devices complete after 0.209 msecs
>[195766.607559] r8169 0000:14:00.0: wake-up capability enabled by ACPI
>[195766.651129] PM: noirq suspend of devices complete after 43.761 msecs
>[195766.651636] ACPI: Preparing to enter system sleep state S3
>[195766.651804] PM: Saving platform NVS memory
>[195766.652770] Disabling non-boot CPUs ...
>[195766.654072] smpboot: CPU 1 is now offline
>[195766.654582] Extended CMOS year: 2000
>[195766.654582] ACPI: Low-level resume complete
>[195766.654582] PM: Restoring platform NVS memory
>[195766.654582] Extended CMOS year: 2000
>[195766.654582] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[195766.659875] Enabling non-boot CPUs ...
>[195766.660008] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[195766.674791] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[195766.679592] CPU1 is up
>[195766.681464] ACPI: Waking up from system sleep state S3
>[195766.769248] PM: noirq resume of devices complete after 87.554 msecs
>[195766.769335] PM: early resume of devices complete after 0.053 msecs
>[195766.769395] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[195766.769419] usb usb3: root hub lost power or was reset
>[195766.769432] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[195766.769457] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[195766.769458] usb usb4: root hub lost power or was reset
>[195766.769470] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[195766.769483] usb usb5: root hub lost power or was reset
>[195766.769501] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[195766.769529] usb usb6: root hub lost power or was reset
>[195766.769541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[195766.769575] usb usb7: root hub lost power or was reset
>[195766.769587] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[195766.769622] usb usb8: root hub lost power or was reset
>[195766.769638] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[195766.769665] pci 0000:00:1e.0: setting latency timer to 64
>[195766.769682] ata_piix 0000:00:1f.2: setting latency timer to 64
>[195766.769684] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[195766.769693] ata_piix 0000:00:1f.5: setting latency timer to 64
>[195766.769820] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[195766.769897] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to disable radio.
>[195766.769918] r8169 0000:14:00.0: wake-up capability disabled by ACPI
>[195766.772230] <6>[fglrx] Power up the ASIC
>[195766.772242] <6>[fglrx] Preparing resume fglrx in kernel.
>[195766.796875] <6>[fglrx] Resuming fglrx in kernel completed.
>[195766.796988] <6>[fglrx] IRQ 49 Enabled
>[195766.996107] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[195767.089049] ata4: SATA link down (SStatus 0 SControl 300)
>[195767.100050] ata3: SATA link down (SStatus 0 SControl 300)
>[195767.212113] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[195767.229120] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[195767.308245] ata2.00: configured for UDMA/100
>[195771.411181] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[195771.420853] ata1.00: configured for UDMA/133
>[195771.420911] sd 0:0:0:0: [sda] Starting disk
>[195771.430752] Extended CMOS year: 2000
>[195771.448163] PM: resume of devices complete after 4678.824 msecs
>[195771.448298] PM: Finishing wakeup.
>[195771.448299] Restarting tasks ... done.
>[195771.517248] video LNXVIDEO:00: Restoring backlight state
>[195771.670724] r8169 0000:14:00.0: p3p1: link down
>[195771.670764] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[195787.862317] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[195787.865781] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[195787.865783] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[195787.873126] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[195787.873130] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[195791.731449] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[195791.734723] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[195791.780575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[195797.080708] wlan0: authenticate with 84:1b:5e:02:d5:33
>[195797.085646] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[195797.107914] wlan0: authenticated
>[195797.108101] wlan0: waiting for beacon from 84:1b:5e:02:d5:33
>[195797.204056] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[195797.210002] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=1)
>[195797.218671] wlan0: associated
>[195797.218746] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[195816.709063] usb 4-2: new low-speed USB device number 9 using uhci_hcd
>[195816.872330] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[195816.872342] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[195816.872350] usb 4-2: Product: USB Laser Mouse
>[195816.872356] usb 4-2: Manufacturer: Logitech
>[195816.891507] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input19
>[195816.891949] hid-generic 0003:046D:C062.0008: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[196441.454335] hub 4-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
>[196441.454352] usb 4-2: USB disconnect, device number 9
>[196441.671139] usb 4-2: new low-speed USB device number 10 using uhci_hcd
>[196441.831451] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[196441.831462] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[196441.831469] usb 4-2: Product: USB Laser Mouse
>[196441.831475] usb 4-2: Manufacturer: Logitech
>[196441.850949] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input20
>[196441.851783] hid-generic 0003:046D:C062.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[228416.204647] usb 4-2: USB disconnect, device number 10
>[233513.342057] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[233513.421410] cfg80211: Calling CRDA to update world regulatory domain
>[233514.626341] cfg80211: World regulatory domain updated:
>[233514.626345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[233514.626347] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[233514.626349] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[233514.626350] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[233514.626352] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[233514.626353] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[233514.626361] cfg80211: Calling CRDA for country: SE
>[233514.629128] cfg80211: Regulatory domain changed to country: SE
>[233514.629131] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[233514.629133] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[233514.629134] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[233514.629136] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[233514.629138] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[233517.154983] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[233517.154988] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[233517.154989] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[233517.154993] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[233517.155022] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[233517.155026] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[233517.155029] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[233517.155031] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[233517.155870] PM: Basic memory bitmaps created
>[233517.155871] PM: Syncing filesystems ... done.
>[233517.558618] Freezing user space processes ... (elapsed 0.04 seconds) done.
>[233517.603139] PM: Preallocating image memory... done (allocated 610096 pages)
>[233518.187039] PM: Allocated 2440384 kbytes in 0.58 seconds (4207.55 MB/s)
>[233518.187041] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[233518.198348] Suspending console(s) (use no_console_suspend to debug)
>[233518.198491] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[233518.198970] <6>[fglrx] IRQ 49 Disabled
>[233518.199016] <6>[fglrx] Preparing suspend fglrx in kernel.
>[233518.561138] <6>[fglrx] Suspending fglrx in kernel completed.
>[233518.561140] <6>[fglrx] Power down the ASIC .
>[233518.614162] PM: freeze of devices complete after 415.808 msecs
>[233518.614378] PM: late freeze of devices complete after 0.213 msecs
>[233518.615156] PM: noirq freeze of devices complete after 0.776 msecs
>[233518.615702] ACPI: Preparing to enter system sleep state S4
>[233518.623078] PM: Saving platform NVS memory
>[233518.624032] Disabling non-boot CPUs ...
>[233518.625309] smpboot: CPU 1 is now offline
>[233518.625890] Extended CMOS year: 2000
>[233518.625958] PM: Creating hibernation image:
>[233518.626304] PM: Need to copy 331529 pages
>[233518.626304] PM: Normal pages needed: 331529 + 1024, available pages: 707936
>[233518.626304] PM: Restoring platform NVS memory
>[233518.626304] Extended CMOS year: 2000
>[233518.626304] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[233518.631170] Enabling non-boot CPUs ...
>[233518.631257] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[233518.644004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[233518.649021] CPU1 is up
>[233518.650776] ACPI: Waking up from system sleep state S4
>[233518.651228] pci 0000:02:00.0: [197b:2382] type 00 class 0x088000
>[233518.651252] pci 0000:02:00.0: reg 10: [mem 0xf2100000-0xf21000ff]
>[233518.651333] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>[233518.651449] pci 0000:02:00.2: [197b:2381] type 00 class 0x080501
>[233518.651469] pci 0000:02:00.2: reg 10: [mem 0xf2100400-0xf21004ff]
>[233518.651657] pci 0000:02:00.3: [197b:2383] type 00 class 0x088000
>[233518.651677] pci 0000:02:00.3: reg 10: [mem 0xf2100800-0xf21008ff]
>[233518.653061] acpi device:35: parent device:20 should not be sleeping
>[233518.653101] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0000000-0xc000ffff pref]
>[233518.653103] pci 0000:02:00.0: BAR 0: assigned [mem 0xf2100000-0xf21000ff]
>[233518.653109] pci 0000:02:00.2: BAR 0: assigned [mem 0xf2100100-0xf21001ff]
>[233518.653115] pci 0000:02:00.3: BAR 0: assigned [mem 0xf2100200-0xf21002ff]
>[233518.653124] pci 0000:02:00.0: no hotplug settings from platform
>[233518.653127] pci 0000:02:00.2: no hotplug settings from platform
>[233518.653130] pci 0000:02:00.3: no hotplug settings from platform
>[233518.653178] pci 0000:02:00.0: parent 0000:00:1c.0 should not be sleeping
>[233518.653201] sdhci-pci 0000:02:00.0: SDHCI controller found [197b:2382] (rev 0)
>[233518.653314] Registered led device: mmc0::
>[233518.673402] PM: noirq restore of devices complete after 22.450 msecs
>[233518.673493] PM: early restore of devices complete after 0.056 msecs
>[233518.756757] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA
>[233518.756844] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[233518.756845] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[233518.756871] usb usb3: root hub lost power or was reset
>[233518.756872] usb usb4: root hub lost power or was reset
>[233518.756883] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[233518.756890] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[233518.756905] usb usb5: root hub lost power or was reset
>[233518.756924] usb usb1: root hub lost power or was reset
>[233518.756978] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[233518.757047] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[233518.757071] usb usb6: root hub lost power or was reset
>[233518.757082] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[233518.757105] usb usb7: root hub lost power or was reset
>[233518.757115] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[233518.757138] usb usb8: root hub lost power or was reset
>[233518.757151] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[233518.757166] usb usb2: root hub lost power or was reset
>[233518.760819] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[233518.760831] pci 0000:00:1e.0: setting latency timer to 64
>[233518.760845] ata_piix 0000:00:1f.2: setting latency timer to 64
>[233518.760858] ata_piix 0000:00:1f.5: setting latency timer to 64
>[233518.761066] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[233518.761118] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[233518.761375] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[233518.795145] <6>[fglrx] Power up the ASIC
>[233518.795157] <6>[fglrx] Preparing resume fglrx in kernel.
>[233518.795791] sdhci-pci 0000:02:00.2: SDHCI controller found [197b:2381] (rev 0)
>[233518.795807] sdhci-pci 0000:02:00.2: Refusing to bind to secondary interface.
>[233518.819680] <6>[fglrx] Resuming fglrx in kernel completed.
>[233518.819782] <6>[fglrx] IRQ 49 Enabled
>[233519.081053] ata4: SATA link down (SStatus 0 SControl 300)
>[233519.092021] ata3: SATA link down (SStatus 0 SControl 300)
>[233519.092053] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[233519.221068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[233519.221194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[233519.230649] ata1.00: configured for UDMA/133
>[233519.230705] sd 0:0:0:0: [sda] Starting disk
>[233519.262182] ata2.00: configured for UDMA/100
>[233519.308064] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[233519.465526] PM: restore of devices complete after 708.835 msecs
>[233519.465692] PM: Image restored successfully.
>[233519.465693] Restarting tasks ... done.
>[233519.469725] PM: Basic memory bitmaps freed
>[233519.469870] video LNXVIDEO:00: Restoring backlight state
>[233520.952186] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[233520.955513] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[233520.996245] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[233521.004720] r8169 0000:14:00.0: p3p1: link down
>[233521.004754] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[233527.736602] wlan0: authenticate with 84:1b:5e:02:d5:33
>[233527.738450] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[233527.939059] wlan0: send auth to 84:1b:5e:02:d5:33 (try 2/3)
>[233527.941064] wlan0: authenticated
>[233527.942055] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[233527.945959] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=1)
>[233527.950509] wlan0: associated
>[233527.950582] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[234952.043342] wlan0: deauthenticating from 84:1b:5e:02:d5:33 by local choice (reason=3)
>[234952.130397] cfg80211: Calling CRDA to update world regulatory domain
>[234952.285797] cfg80211: World regulatory domain updated:
>[234952.285800] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[234952.285802] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[234952.285804] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[234952.285805] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[234952.285807] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[234952.285808] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[234952.285816] cfg80211: Calling CRDA for country: SE
>[234952.287693] cfg80211: Regulatory domain changed to country: SE
>[234952.287696] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[234952.287698] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[234952.287699] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[234952.287701] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[234952.287702] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[234954.086770] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
>[234954.086775] PM: Marking nosave pages: [mem 0xbdab1000-0xbdab6fff]
>[234954.086777] PM: Marking nosave pages: [mem 0xbdbb5000-0xbdc0efff]
>[234954.086780] PM: Marking nosave pages: [mem 0xbdd08000-0xbdf0efff]
>[234954.086791] PM: Marking nosave pages: [mem 0xbdf18000-0xbdf1efff]
>[234954.086792] PM: Marking nosave pages: [mem 0xbdf55000-0xbdf9efff]
>[234954.086795] PM: Marking nosave pages: [mem 0xbdfe4000-0xbdffcfff]
>[234954.086796] PM: Marking nosave pages: [mem 0xbe000000-0xffffffff]
>[234954.087642] PM: Basic memory bitmaps created
>[234954.087644] PM: Syncing filesystems ... done.
>[234954.093351] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[234954.104198] PM: Preallocating image memory... done (allocated 389550 pages)
>[234954.325285] PM: Allocated 1558200 kbytes in 0.22 seconds (7082.72 MB/s)
>[234954.325287] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[234954.336328] Suspending console(s) (use no_console_suspend to debug)
>[234954.336483] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[234954.337030] <6>[fglrx] IRQ 49 Disabled
>[234954.337073] <6>[fglrx] Preparing suspend fglrx in kernel.
>[234954.701157] <6>[fglrx] Suspending fglrx in kernel completed.
>[234954.701159] <6>[fglrx] Power down the ASIC .
>[234954.751076] PM: freeze of devices complete after 414.742 msecs
>[234954.751302] PM: late freeze of devices complete after 0.223 msecs
>[234954.752185] PM: noirq freeze of devices complete after 0.880 msecs
>[234954.752718] ACPI: Preparing to enter system sleep state S4
>[234954.759134] PM: Saving platform NVS memory
>[234954.760096] Disabling non-boot CPUs ...
>[234954.761389] smpboot: CPU 1 is now offline
>[234954.761912] Extended CMOS year: 2000
>[234954.761982] PM: Creating hibernation image:
>[234954.762385] PM: Need to copy 389974 pages
>[234954.762385] PM: Normal pages needed: 389974 + 1024, available pages: 649491
>[234954.762385] PM: Restoring platform NVS memory
>[234954.762385] Extended CMOS year: 2000
>[234954.762385] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
>[234954.767193] Enabling non-boot CPUs ...
>[234954.767290] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[234954.780004] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
>[234954.785022] CPU1 is up
>[234954.786775] ACPI: Waking up from system sleep state S4
>[234954.820088] PM: noirq restore of devices complete after 33.134 msecs
>[234954.820172] PM: early restore of devices complete after 0.054 msecs
>[234954.917726] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[234954.917749] usb usb3: root hub lost power or was reset
>[234954.917761] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[234954.917783] usb usb4: root hub lost power or was reset
>[234954.917793] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[234954.917798] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[234954.917816] usb usb5: root hub lost power or was reset
>[234954.917854] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[234954.917881] usb usb6: root hub lost power or was reset
>[234954.917891] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[234954.917914] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[234954.917915] usb usb7: root hub lost power or was reset
>[234954.917925] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[234954.917949] usb usb8: root hub lost power or was reset
>[234954.917962] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[234954.917978] pci 0000:00:1e.0: setting latency timer to 64
>[234954.917980] usb usb2: root hub lost power or was reset
>[234954.917993] ata_piix 0000:00:1f.2: setting latency timer to 64
>[234954.918020] ata_piix 0000:00:1f.5: setting latency timer to 64
>[234954.921880] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[234954.921932] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
>[234954.921988] iwlwifi 0000:0e:00.0: RF_KILL bit toggled to enable radio.
>[234954.926393] usb usb1: root hub lost power or was reset
>[234954.930273] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>[234954.948097] <6>[fglrx] Power up the ASIC
>[234954.948109] <6>[fglrx] Preparing resume fglrx in kernel.
>[234954.972624] <6>[fglrx] Resuming fglrx in kernel completed.
>[234954.972726] <6>[fglrx] IRQ 49 Enabled
>[234955.245062] ata4: SATA link down (SStatus 0 SControl 300)
>[234955.249049] usb 2-2: reset high-speed USB device number 2 using ehci_hcd
>[234955.256034] ata3: SATA link down (SStatus 0 SControl 300)
>[234955.385089] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[234955.385214] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[234955.394676] ata1.00: configured for UDMA/133
>[234955.394740] sd 0:0:0:0: [sda] Starting disk
>[234955.426202] ata2.00: configured for UDMA/100
>[234955.465042] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
>[234955.622448] PM: restore of devices complete after 704.776 msecs
>[234955.622602] PM: Image restored successfully.
>[234955.622603] Restarting tasks ... done.
>[234955.630083] PM: Basic memory bitmaps freed
>[234955.630228] video LNXVIDEO:00: Restoring backlight state
>[234955.733904] iwlwifi 0000:0e:00.0: L1 Enabled; Disabling L0S
>[234955.743069] iwlwifi 0000:0e:00.0: Radio type=0x0-0x2-0x0
>[234955.785619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[234955.794456] r8169 0000:14:00.0: p3p1: link down
>[234955.794537] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[234955.984030] usb 4-2: new low-speed USB device number 11 using uhci_hcd
>[234956.146871] usb 4-2: New USB device found, idVendor=046d, idProduct=c062
>[234956.146875] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[234956.146877] usb 4-2: Product: USB Laser Mouse
>[234956.146879] usb 4-2: Manufacturer: Logitech
>[234956.165192] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input21
>[234956.165496] hid-generic 0003:046D:C062.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1a.1-2/input0
>[234961.078058] wlan0: authenticate with 84:1b:5e:02:d5:33
>[234961.080501] wlan0: send auth to 84:1b:5e:02:d5:33 (try 1/3)
>[234961.082404] wlan0: authenticated
>[234961.084052] wlan0: associate with 84:1b:5e:02:d5:33 (try 1/3)
>[234961.089562] wlan0: RX AssocResp from 84:1b:5e:02:d5:33 (capab=0x411 status=0 aid=1)
>[234961.090925] wlan0: associated
>[234961.090953] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[238101.258069] Adding 6127612k swap on /dev/mapper/vg_pcpcpcpc-lv_swap.  Priority:-1 extents:1 across:6127612k 
>[239084.898701] Adding 6127612k swap on /dev/mapper/vg_pcpcpcpc-lv_swap.  Priority:-1 extents:1 across:6127612k 
>[240844.167920] xfrun4[2239]: segfault at 49 ip 000000000040b460 sp 00007fffa07a2b30 error 4 in xfce4-appfinder.#prelink#.opfmlD (deleted)[400000+1b000]

Actions: View

Attachments on bug 878659: 648863 | 648864 | 648865 | 648866 | 648867 | 648868