Attachment 653035 Details for Bug 880771 – File: dmesg

File: dmesg

dmesg (text/plain), 226.10 KB, created by Pedro Francisco on 2012-11-27 19:04:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pedro Francisco

Created: 2012-11-27 19:04:36 UTC

Size: 226.10 KB

patch

obsolete

>[    1.507817] usb 1-4: Product: USB2.0 Hub Controller
>[    1.507820] usb 1-4: Manufacturer: NEC Corporation
>[    1.508107] hub 1-4:1.0: USB hub found
>[    1.508184] hub 1-4:1.0: 4 ports detected
>[    1.568280] dracut: dracut-018-105.git20120927.fc17
>[    1.673000] Loading iSCSI transport class v2.0-870.
>[    1.676205] iscsi: registered transport (qla4xxx)
>[    1.676248] QLogic iSCSI HBA Driver
>[    1.681093] libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>[    1.681101] libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>[    1.683896] Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>[    1.683941] iscsi: registered transport (cxgb3i)
>[    1.689671] Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
>[    1.689718] iscsi: registered transport (cxgb4i)
>[    1.694209] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
>[    1.695427] Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
>[    1.695470] iscsi: registered transport (bnx2i)
>[    1.699998] iscsi: registered transport (be2iscsi)
>[    1.756951] udevd[148]: starting version 182
>[    1.783210] usb 1-4.2: new low-speed USB device number 3 using ehci_hcd
>[    1.812141] [drm] Initialized drm 1.1.0 20060810
>[    1.840614] i915 0000:00:02.0: setting latency timer to 64
>[    1.840954] i915 0000:00:02.0: irq 44 for MSI/MSI-X
>[    1.840968] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    1.840970] [drm] Driver supports precise vblank timestamp query.
>[    1.841046] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.873808] usb 1-4.2: New USB device found, idVendor=045e, idProduct=00f6
>[    1.873817] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.873823] usb 1-4.2: Product: Comfort Optical Mouse 1000
>[    1.873828] usb 1-4.2: Manufacturer: Microsoft
>[    1.877709] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input5
>[    1.877964] hid-generic 0003:045E:00F6.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.7-4.2/input0
>[    1.884287] [drm:intel_panel_setup_backlight] *ERROR* Failed to get maximum backlight value
>[    1.951211] usb 1-4.4: new low-speed USB device number 4 using ehci_hcd
>[    2.060688] usb 1-4.4: New USB device found, idVendor=1241, idProduct=1603
>[    2.060697] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.060703] usb 1-4.4: Product: USB Keyboard
>[    2.060708] usb 1-4.4: Manufacturer:  
>[    2.072203] input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input6
>[    2.072420] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1a.7-4.4/input0
>[    2.091208] input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.1/input/input7
>[    2.091422] hid-generic 0003:1241:1603.0003: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1a.7-4.4/input1
>[    2.140027] [drm] initialized overlay support
>[    2.295023] fbcon: inteldrmfb (fb0) is primary device
>[    2.495568] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 300495
>[    2.603697] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
>[    2.617174] i915: fixme: max PWM is zero
>[    2.626213] Console: switching to colour frame buffer device 160x50
>[    2.635189] fb0: inteldrmfb frame buffer device
>[    2.635192] drm: registered panic notifier
>[    2.639279] acpi device:09: registered as cooling_device2
>[    2.639422] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.639527] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
>[    2.639668] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    2.644380] dracut: Starting plymouth daemon
>[    3.257713] wmi: Mapper loaded
>[    3.274411] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    3.274678] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
>[    3.274948] r8169 0000:08:00.0: eth0: RTL8101e at 0xf7e42000, 00:1b:24:d0:3f:98, XID 94200000 IRQ 45
>[    3.282066] sdhci: Secure Digital Host Controller Interface driver
>[    3.282071] sdhci: Copyright(c) Pierre Ossman
>[    3.331099] firewire_ohci 0000:09:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
>[    3.331366] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
>[    3.332424] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.333445] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.333497] Registered led device: mmc0::
>[    3.356049] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
>[    3.391495] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.448731] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.505809] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.562407] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[    3.832243] firewire_core 0000:09:09.0: created device fw0: GUID 00241b00ecbb8200, S400
>[    3.910217] EXT4-fs (sda6): orphan cleanup on readonly fs
>[    3.927083] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 221203
>[    3.943457] EXT4-fs (sda6): 1 orphan inode deleted
>[    3.943462] EXT4-fs (sda6): recovery complete
>[    4.032325] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[    4.139456] dracut: Checking ext4: /dev/disk/by-uuid/6823afd3-2e77-47d5-bdcd-d93f766b0033
>[    4.139872] dracut: issuing e2fsck -a  /dev/disk/by-uuid/6823afd3-2e77-47d5-bdcd-d93f766b0033
>[    4.199995] dracut: ROOT: clean, 327597/966656 files, 2980536/3839488 blocks
>[    4.200999] dracut: Remounting /dev/disk/by-uuid/6823afd3-2e77-47d5-bdcd-d93f766b0033 with -o ro
>[    4.265561] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[    4.296144] dracut: Mounted root filesystem /dev/sda6
>[    4.653381] dracut: Switching root
>[    5.625276] type=1404 audit(1353919055.984:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>[    5.863571] SELinux: 2048 avtab hash slots, 103464 rules.
>[    5.901966] SELinux: 2048 avtab hash slots, 103464 rules.
>[    6.093604] SELinux:  9 users, 15 roles, 4213 types, 231 bools, 1 sens, 1024 cats
>[    6.093612] SELinux:  83 classes, 103464 rules
>[    6.102380] SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>[    6.102385] SELinux:  Permission block_suspend in class capability2 not defined in policy.
>[    6.102394] SELinux: the above unknown classes and permissions will be allowed
>[    6.102404] SELinux:  Completing initialization.
>[    6.102406] SELinux:  Setting up existing superblocks.
>[    6.102415] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.102423] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>[    6.102444] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>[    6.102451] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[    6.102467] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.102492] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>[    6.103270] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>[    6.103280] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>[    6.105293] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>[    6.105303] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>[    6.105309] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>[    6.105330] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[    6.105340] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>[    6.105349] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>[    6.105376] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>[    6.106477] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.106484] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.106523] SELinux: initialized (dev sda6, type ext4), uses xattr
>[    6.106810] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>[    6.125409] type=1403 audit(1353919056.484:3): policy loaded auid=4294967295 ses=4294967295
>[    6.135563] systemd[1]: Successfully loaded SELinux policy in 552ms 830us.
>[    6.350447] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[    6.358110] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.437100] systemd[1]: Relabelled /dev and /run in 78ms 790us.
>[    6.482125] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.487238] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.496271] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.504237] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.511199] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.516116] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.521260] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.526199] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
>[    6.526487] systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
>[    6.564838] systemd[1]: Set hostname to <s2>.
>[    8.449393] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[   10.093218] udevd[338]: starting version 182
>[   10.714688] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>[   10.718054] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
>[   10.718689] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>[   10.731819] systemd-journald[335]: [/etc/systemd/systemd-journald.conf:11] Unknown lvalue 'Storage' in section 'Journal'. Ignoring.
>[   10.877836] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>[   10.895743] systemd-journald[335]: Fixed max_use=100.4M max_size=12.5M min_size=64.0K keep_free=50.2M
>[   10.896245] systemd-journald[335]: Vacuuming...
>[   10.949127] EXT4-fs (sda6): re-mounted. Opts: (null)
>[   15.363736] input: HP WMI hotkeys as /devices/virtual/input/input10
>[   15.792043] cfg80211: Calling CRDA to update world regulatory domain
>[   15.957854] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa1
>[   15.981149] ACPI Warning: 0x00001c20-0x00001c3f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
>[   15.981159] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   16.395420] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
>[   16.395431] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   16.395436] ACPI Warning: 0x00001180-0x000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
>[   16.395442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   16.395445] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   16.463719] iTCO_vendor_support: vendor-support=0
>[   16.544981] r592: driver successfully loaded
>[   16.652777] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[   16.652791] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa1
>[   16.654189] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[   16.654361] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   16.845555] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   16.845601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>[   16.845964] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   17.267145] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[   17.630701] ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   17.630708] ALSA sound/pci/hda/hda_auto_parser.c:326    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   17.630712] ALSA sound/pci/hda/hda_auto_parser.c:330    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[   17.630715] ALSA sound/pci/hda/hda_auto_parser.c:331    mono: mono_out=0x0
>[   17.630718] ALSA sound/pci/hda/hda_auto_parser.c:334    dig-out=0x1e/0x0
>[   17.630720] ALSA sound/pci/hda/hda_auto_parser.c:335    inputs:
>[   17.630723] ALSA sound/pci/hda/hda_auto_parser.c:339      Mic=0x18
>[   17.630726] ALSA sound/pci/hda/hda_auto_parser.c:339      Internal Mic=0x19
>[   17.631905] ALSA sound/pci/hda/patch_realtek.c:1336 realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
>[   17.631909] ALSA sound/pci/hda/patch_realtek.c:1419 realtek: Enable default setup for auto mode as fallback
>[   17.716796] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
>[   17.716800] iwl3945: Copyright(c) 2003-2011 Intel Corporation
>[   17.772624] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>[   17.772629] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
>[   17.772788] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
>[   17.772986] Registered led device: phy0-led
>[   18.008556] cfg80211: World regulatory domain updated:
>[   18.008561] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   18.008564] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   18.008567] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   18.008570] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[   18.008573] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   18.008575] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[   18.180403] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[   18.180768] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   18.414866] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>[   20.043763] cfg80211: Calling CRDA for country: PT
>[   20.049779] cfg80211: Regulatory domain changed to country: PT
>[   20.049784] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[   20.049787] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   20.049790] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   20.049793] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[   20.049795] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[   20.971562] Adding 2562332k swap on /dev/sda7.  Priority:0 extents:1 across:2562332k 
>[   23.683772] EXT4-fs (sda5): mounting ext2 file system using the ext4 subsystem
>[   23.689840] EXT4-fs (sda5): mounted filesystem without journal. Opts: (null)
>[   23.828668] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
>[   23.828678] SELinux: initialized (dev sda8, type ext4), uses xattr
>[   23.963231] SELinux: initialized (dev sda5, type ext2), uses xattr
>[   26.150206] iscsi: registered transport (tcp)
>[   27.262345] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   27.526971] iscsi: registered transport (iser)
>[   27.602952] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   30.482312] systemd-journald[335]: Fixed max_use=1.4G max_size=128.0M min_size=64.0K keep_free=738.0M
>[   30.996280] systemd-journald[335]: Flushing to /var...
>[   45.424953] 8021q: 802.1Q VLAN Support v1.8
>[   45.462708] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
>[   45.529477] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   45.625239] r8169 0000:08:00.0: p3p1: link down
>[   45.625407] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[   50.189189] NET: Registered protocol family 23
>[   50.199262] Linux media interface: v0.10
>[   50.201920] Linux video capture interface: v2.00
>[   50.204653] usbcore: registered new interface driver uvcvideo
>[   50.204657] USB Video Class driver (1.1.1)
>[   53.558339] wlan0: authenticate with 00:26:5b:09:2d:a8
>[   53.563308] wlan0: send auth to 00:26:5b:09:2d:a8 (try 1/3)
>[   53.564504] wlan0: authenticated
>[   53.565788] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[   53.572029] wlan0: associate with 00:26:5b:09:2d:a8 (try 1/3)
>[   53.573714] wlan0: RX AssocResp from 00:26:5b:09:2d:a8 (capab=0xc31 status=0 aid=1)
>[   53.574877] wlan0: associated
>[   53.574910] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   69.571363] fuse init (API version 7.20)
>[   69.596955] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
>[   69.621358] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
>[  112.318273] SELinux: initialized (dev proc, type proc), uses genfs_contexts
>[  177.906774] wlan0: deauthenticating from 00:26:5b:09:2d:a8 by local choice (reason=3)
>[  177.924162] cfg80211: Calling CRDA to update world regulatory domain
>[  177.944818] cfg80211: World regulatory domain updated:
>[  177.944824] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  177.944827] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  177.944831] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  177.944834] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  177.944837] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  177.944839] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  177.944856] cfg80211: Calling CRDA for country: PT
>[  177.952963] cfg80211: Regulatory domain changed to country: PT
>[  177.952969] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  177.952972] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  177.952974] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  177.952977] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  177.952979] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[  180.362187] PM: Syncing filesystems ... done.
>[  180.365813] PM: Preparing system for mem sleep
>[  180.481381] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  180.493189] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  180.504144] PM: Entering mem sleep
>[  180.504181] Suspending console(s) (use no_console_suspend to debug)
>[  180.537702] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  180.645589] sd 0:0:0:0: [sda] Stopping disk
>[  180.664869] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[  180.665775] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[  181.584549] PM: suspend of devices complete after 1047.046 msecs
>[  181.584790] PM: late suspend of devices complete after 0.237 msecs
>[  181.640236] PM: noirq suspend of devices complete after 55.441 msecs
>[  181.640525] ACPI: Preparing to enter system sleep state S3
>[  181.642134] PM: Saving platform NVS memory
>[  181.642233] Disabling non-boot CPUs ...
>[  181.643672] smpboot: CPU 1 is now offline
>[  181.644196] CPU 1 offline: Remove Rx thread
>[  181.644334] Extended CMOS year: 2000
>[  181.644334] ACPI: Low-level resume complete
>[  181.644334] PM: Restoring platform NVS memory
>[  181.644334] Extended CMOS year: 2000
>[  181.644334] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[  181.644334] Enabling non-boot CPUs ...
>[  181.644334] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  181.643516] Initializing CPU#1
>[  181.657198] bnx2i: CPU 1 online: Create Rx thread
>[  181.657522] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[  181.658046] CPU1 is up
>[  181.659667] ACPI: Waking up from system sleep state S3
>[  181.752083] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[  181.752085] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[  181.774265] PM: noirq resume of devices complete after 110.088 msecs
>[  181.774409] PM: early resume of devices complete after 0.102 msecs
>[  181.774455] i915 0000:00:02.0: setting latency timer to 64
>[  181.774637] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  181.774730] usb usb3: root hub lost power or was reset
>[  181.774769] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[  181.774813] usb usb4: root hub lost power or was reset
>[  181.775023] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  181.776508] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[  181.777395] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  181.777625] usb usb5: root hub lost power or was reset
>[  181.777810] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  181.777911] usb usb6: root hub lost power or was reset
>[  181.778099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  181.778283] usb usb7: root hub lost power or was reset
>[  181.778607] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  181.778837] pci 0000:00:1e.0: setting latency timer to 64
>[  181.779038] ata_piix 0000:00:1f.1: setting latency timer to 64
>[  181.779403] ahci 0000:00:1f.2: setting latency timer to 64
>[  181.780047] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  181.781098] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  181.857001] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[  182.056929] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[  182.056932] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[  182.079819] ata4.00: configured for MWDMA2
>[  182.086506] ata2: SATA link down (SStatus 0 SControl 300)
>[  182.087529] ata3: SATA link down (SStatus 0 SControl 300)
>[  182.336527] firewire_core 0000:09:09.0: rediscovered device fw0
>[  183.872530] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  183.873430] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  183.874563] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[  183.874568] ata1.00: configured for UDMA/100
>[  183.885559] sd 0:0:0:0: [sda] Starting disk
>[  183.897478] Extended CMOS year: 2000
>[  183.909950] PM: resume of devices complete after 2135.536 msecs
>[  183.921604] PM: Finishing wakeup.
>[  183.921607] Restarting tasks ... done.
>[  183.927198] video LNXVIDEO:01: Restoring backlight state
>[  183.991028] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  184.050098] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  184.109115] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  184.129139] usb 4-2: new low-speed USB device number 2 using uhci_hcd
>[  184.175277] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[  184.199522] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  184.226223] r8169 0000:08:00.0: p3p1: link down
>[  184.226272] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[  184.303945] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[  184.303952] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[  184.303957] usb 4-2: Product: Comfort Optical Mouse 1000
>[  184.303960] usb 4-2: Manufacturer: Microsoft
>[  184.322703] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input13
>[  184.323184] hid-generic 0003:045E:00F6.0004: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[  184.323287] usb 1-4: USB disconnect, device number 2
>[  184.323292] usb 1-4.2: USB disconnect, device number 3
>[  184.336458] usb 1-4.4: USB disconnect, device number 4
>[  191.206822] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[  191.211639] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[  191.213064] wlan0: authenticated
>[  191.213476] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  191.217051] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[  191.230321] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=1)
>[  191.235738] wlan0: associated
>[  191.235801] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  213.004593] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[  213.012118] cfg80211: Calling CRDA to update world regulatory domain
>[  213.022430] cfg80211: World regulatory domain updated:
>[  213.022436] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  213.022440] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  213.022443] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  213.022446] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  213.022449] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  213.022452] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  213.022478] cfg80211: Calling CRDA for country: PT
>[  213.026981] cfg80211: Regulatory domain changed to country: PT
>[  213.026985] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  213.026988] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  213.026991] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  213.026994] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  213.026996] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[  218.884299] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[  218.885549] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[  218.886989] wlan0: authenticated
>[  218.887406] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  218.888032] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[  218.891609] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=1)
>[  218.893318] wlan0: associated
>[  266.373848] wlan0: deauthenticated from 00:1f:ca:2d:02:e0 (Reason: 10)
>[  266.386266] cfg80211: Calling CRDA to update world regulatory domain
>[  266.395089] cfg80211: World regulatory domain updated:
>[  266.395094] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  266.395098] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  266.395101] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  266.395104] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  266.395107] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  266.395109] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  266.395130] cfg80211: Calling CRDA for country: PT
>[  266.399846] cfg80211: Regulatory domain changed to country: PT
>[  266.399850] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  266.399854] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  266.399857] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  266.399859] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  266.399862] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[  266.795045] wlan0: authenticate with 00:1f:ca:46:44:30
>[  266.796871] wlan0: direct probe to 00:1f:ca:46:44:30 (try 1/3)
>[  266.997023] wlan0: send auth to 00:1f:ca:46:44:30 (try 2/3)
>[  266.997653] wlan0: authenticated
>[  266.998054] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  266.999025] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[  267.000239] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[  267.001704] wlan0: associated
>[  273.217180] ieee80211 phy0: wlan0: No probe response from AP 00:1f:ca:46:44:30 after 500ms, disconnecting.
>[  273.221164] cfg80211: Calling CRDA to update world regulatory domain
>[  273.225746] cfg80211: World regulatory domain updated:
>[  273.225753] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  273.225758] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  273.225762] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  273.225767] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[  273.225771] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  273.225775] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[  273.225805] cfg80211: Calling CRDA for country: PT
>[  273.229994] cfg80211: Regulatory domain changed to country: PT
>[  273.230037] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[  273.230042] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  273.230046] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  273.230050] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[  273.230054] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[  273.509157] wlan0: authenticate with b8:62:1f:45:2c:20
>[  273.517162] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[  273.518646] wlan0: authenticated
>[  273.521663] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[  273.523035] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[  273.525875] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=15)
>[  273.527466] wlan0: associated
>[ 1050.993228] wlan0: deauthenticated from b8:62:1f:45:2c:20 (Reason: 10)
>[ 1051.014401] cfg80211: Calling CRDA to update world regulatory domain
>[ 1051.023782] cfg80211: World regulatory domain updated:
>[ 1051.023788] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1051.023794] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1051.023798] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1051.023803] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1051.023807] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1051.023811] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1051.023842] cfg80211: Calling CRDA for country: PT
>[ 1051.034569] cfg80211: Regulatory domain changed to country: PT
>[ 1051.034575] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1051.034579] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1051.034583] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1051.034587] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1051.034591] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1051.288718] wlan0: authenticate with 00:0f:24:d6:96:f0
>[ 1051.291547] wlan0: send auth to 00:0f:24:d6:96:f0 (try 1/3)
>[ 1051.293031] wlan0: authenticated
>[ 1051.296631] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1051.301036] wlan0: associate with 00:0f:24:d6:96:f0 (try 1/3)
>[ 1051.305141] wlan0: RX AssocResp from 00:0f:24:d6:96:f0 (capab=0x431 status=0 aid=42)
>[ 1051.306791] wlan0: associated
>[ 1055.520765] wlan0: deauthenticated from 00:0f:24:d6:96:f0 (Reason: 2)
>[ 1055.537364] cfg80211: Calling CRDA to update world regulatory domain
>[ 1055.541836] cfg80211: World regulatory domain updated:
>[ 1055.541843] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1055.541849] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1055.541853] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1055.541858] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1055.541862] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1055.541866] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1055.541893] cfg80211: Calling CRDA for country: PT
>[ 1055.547678] cfg80211: Regulatory domain changed to country: PT
>[ 1055.547684] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1055.547689] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1055.547694] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1055.547697] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1055.547701] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1055.696766] wlan0: authenticate with 00:0e:84:ab:0d:d0
>[ 1055.699426] wlan0: send auth to 00:0e:84:ab:0d:d0 (try 1/3)
>[ 1055.700860] wlan0: authenticated
>[ 1055.702250] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1055.703038] wlan0: associate with 00:0e:84:ab:0d:d0 (try 1/3)
>[ 1055.708544] wlan0: RX AssocResp from 00:0e:84:ab:0d:d0 (capab=0x431 status=0 aid=225)
>[ 1055.710566] wlan0: associated
>[ 1056.811742] wlan0: deauthenticated from 00:0e:84:ab:0d:d0 (Reason: 2)
>[ 1056.825344] cfg80211: Calling CRDA to update world regulatory domain
>[ 1056.829581] cfg80211: World regulatory domain updated:
>[ 1056.829587] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1056.829593] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1056.829597] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1056.829602] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1056.829606] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1056.829610] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1056.829645] cfg80211: Calling CRDA for country: PT
>[ 1056.833176] cfg80211: Regulatory domain changed to country: PT
>[ 1056.833180] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1056.833184] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1056.833186] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1056.833189] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1056.833192] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1060.357837] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1060.361101] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1060.362504] wlan0: authenticated
>[ 1060.367608] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1060.369666] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1060.372034] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=10)
>[ 1060.373469] wlan0: associated
>[ 1139.362477] wlan0: deauthenticated from 00:1f:ca:2d:02:e0 (Reason: 10)
>[ 1139.374188] cfg80211: Calling CRDA to update world regulatory domain
>[ 1139.379186] cfg80211: World regulatory domain updated:
>[ 1139.379193] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1139.379196] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1139.379199] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1139.379202] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1139.379205] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1139.379208] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1139.379231] cfg80211: Calling CRDA for country: PT
>[ 1139.383849] cfg80211: Regulatory domain changed to country: PT
>[ 1139.383855] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1139.383858] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1139.383861] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1139.383863] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1139.383866] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1139.784818] wlan0: authenticate with 00:1f:ca:46:44:30
>[ 1139.786521] wlan0: direct probe to 00:1f:ca:46:44:30 (try 1/3)
>[ 1139.987442] wlan0: send auth to 00:1f:ca:46:44:30 (try 2/3)
>[ 1139.988225] wlan0: authenticated
>[ 1139.988784] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1139.990049] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[ 1139.991299] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[ 1139.992891] wlan0: associated
>[ 1146.505182] ieee80211 phy0: wlan0: No probe response from AP 00:1f:ca:46:44:30 after 500ms, disconnecting.
>[ 1146.513060] cfg80211: Calling CRDA to update world regulatory domain
>[ 1146.517944] cfg80211: World regulatory domain updated:
>[ 1146.517951] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1146.517956] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1146.517961] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1146.517966] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1146.517970] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1146.517974] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1146.518026] cfg80211: Calling CRDA for country: PT
>[ 1146.522431] cfg80211: Regulatory domain changed to country: PT
>[ 1146.522436] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1146.522439] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1146.522442] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1146.522445] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1146.522447] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1146.739025] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 1146.740738] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 1146.742237] wlan0: authenticated
>[ 1146.742880] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1146.744044] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 1146.746525] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=13)
>[ 1146.748991] wlan0: associated
>[ 1160.027786] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1160.030268] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1160.032002] wlan0: authenticated
>[ 1160.033156] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1160.038026] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1160.040371] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=4)
>[ 1160.041811] wlan0: associated
>[ 1167.549063] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 1167.568377] cfg80211: Calling CRDA to update world regulatory domain
>[ 1167.572594] cfg80211: World regulatory domain updated:
>[ 1167.572601] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1167.572607] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1167.572612] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1167.572616] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1167.572620] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1167.572625] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1167.572653] cfg80211: Calling CRDA for country: PT
>[ 1167.583739] cfg80211: Regulatory domain changed to country: PT
>[ 1167.583744] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1167.583747] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1167.583750] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1167.583753] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1167.583755] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1176.007857] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1176.010166] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1176.011802] wlan0: authenticated
>[ 1176.013561] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1176.015037] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1176.017860] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=4)
>[ 1176.020476] wlan0: associated
>[ 1223.745214] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 1223.761324] cfg80211: Calling CRDA to update world regulatory domain
>[ 1223.771425] cfg80211: World regulatory domain updated:
>[ 1223.771432] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1223.771437] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1223.771442] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1223.771447] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1223.771451] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1223.771455] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1223.771483] cfg80211: Calling CRDA for country: PT
>[ 1223.777166] cfg80211: Regulatory domain changed to country: PT
>[ 1223.777172] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1223.777177] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1223.777181] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1223.777185] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1223.777189] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1232.200873] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1232.201976] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1232.203418] wlan0: authenticated
>[ 1232.204168] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1232.205035] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1232.207869] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=4)
>[ 1232.209723] wlan0: associated
>[ 1260.567867] wlan0: deauthenticated from 00:1f:ca:2d:02:e0 (Reason: 10)
>[ 1260.582149] cfg80211: Calling CRDA to update world regulatory domain
>[ 1260.585048] cfg80211: World regulatory domain updated:
>[ 1260.585053] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1260.585057] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1260.585060] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1260.585063] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1260.585066] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1260.585068] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1260.585091] cfg80211: Calling CRDA for country: PT
>[ 1260.588068] cfg80211: Regulatory domain changed to country: PT
>[ 1260.588072] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1260.588076] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1260.588078] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1260.588081] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1260.588083] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1260.804525] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 1260.806623] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 1260.811727] wlan0: authenticated
>[ 1260.812600] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1260.815051] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 1260.817230] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=13)
>[ 1260.819375] wlan0: associated
>[ 1363.159084] wlan0: deauthenticating from b8:62:1f:45:2c:20 by local choice (reason=1)
>[ 1363.177234] cfg80211: Calling CRDA to update world regulatory domain
>[ 1363.183380] cfg80211: World regulatory domain updated:
>[ 1363.183386] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1363.183389] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1363.183392] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1363.183395] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1363.183398] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1363.183401] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1363.183423] cfg80211: Calling CRDA for country: PT
>[ 1363.189627] cfg80211: Regulatory domain changed to country: PT
>[ 1363.189631] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1363.189634] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1363.189637] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1363.189640] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1363.189642] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1371.619872] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 1371.621839] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 1371.623321] wlan0: authenticated
>[ 1371.623741] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1371.625742] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 1371.629375] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=13)
>[ 1371.631001] wlan0: associated
>[ 1380.272304] wlan0: deauthenticated from b8:62:1f:45:2c:20 (Reason: 10)
>[ 1380.293209] cfg80211: Calling CRDA to update world regulatory domain
>[ 1380.297312] cfg80211: World regulatory domain updated:
>[ 1380.297318] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1380.297324] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1380.297329] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1380.297333] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1380.297338] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1380.297342] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1380.297373] cfg80211: Calling CRDA for country: PT
>[ 1380.303127] cfg80211: Regulatory domain changed to country: PT
>[ 1380.303134] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1380.303139] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1380.303143] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1380.303147] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1380.303151] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1380.512712] wlan0: authenticate with 00:0e:d7:8d:1a:90
>[ 1380.514465] wlan0: direct probe to 00:0e:d7:8d:1a:90 (try 1/3)
>[ 1380.715039] wlan0: send auth to 00:0e:d7:8d:1a:90 (try 2/3)
>[ 1380.716567] wlan0: authenticated
>[ 1380.717149] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1380.719051] wlan0: associate with 00:0e:d7:8d:1a:90 (try 1/3)
>[ 1380.723739] wlan0: RX AssocResp from 00:0e:d7:8d:1a:90 (capab=0x431 status=0 aid=138)
>[ 1380.728801] wlan0: associated
>[ 1381.640902] wlan0: deauthenticated from 00:0e:d7:8d:1a:90 (Reason: 2)
>[ 1381.645168] cfg80211: Calling CRDA to update world regulatory domain
>[ 1381.649418] cfg80211: World regulatory domain updated:
>[ 1381.649425] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1381.649430] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1381.649435] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1381.649439] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1381.649444] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1381.649448] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1381.649478] cfg80211: Calling CRDA for country: PT
>[ 1381.654370] cfg80211: Regulatory domain changed to country: PT
>[ 1381.654376] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1381.654381] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1381.654385] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1381.654389] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1381.654393] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1381.809128] wlan0: authenticate with 00:0f:24:d6:96:f0
>[ 1381.811104] wlan0: send auth to 00:0f:24:d6:96:f0 (try 1/3)
>[ 1381.813488] wlan0: authenticated
>[ 1381.814889] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1381.816035] wlan0: associate with 00:0f:24:d6:96:f0 (try 1/3)
>[ 1381.819665] wlan0: RX AssocResp from 00:0f:24:d6:96:f0 (capab=0x431 status=0 aid=43)
>[ 1381.821275] wlan0: associated
>[ 1384.606929] wlan0: deauthenticated from 00:0f:24:d6:96:f0 (Reason: 2)
>[ 1384.628327] cfg80211: Calling CRDA to update world regulatory domain
>[ 1384.632737] cfg80211: World regulatory domain updated:
>[ 1384.632744] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1384.632749] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1384.632753] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1384.632758] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1384.632762] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1384.632766] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1384.632797] cfg80211: Calling CRDA for country: PT
>[ 1384.638835] cfg80211: Regulatory domain changed to country: PT
>[ 1384.638841] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1384.638846] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1384.638850] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1384.638854] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1384.638858] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1388.166891] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1388.170984] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1388.172425] wlan0: authenticated
>[ 1388.172979] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1388.174037] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1388.178176] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=10)
>[ 1388.179836] wlan0: associated
>[ 1425.807595] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=2)
>[ 1425.821124] cfg80211: Calling CRDA to update world regulatory domain
>[ 1425.826436] cfg80211: World regulatory domain updated:
>[ 1425.826444] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1425.826449] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1425.826454] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1425.826459] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1425.826463] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1425.826467] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1425.826494] cfg80211: Calling CRDA for country: PT
>[ 1425.831833] cfg80211: Regulatory domain changed to country: PT
>[ 1425.831837] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1425.831840] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1425.831843] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1425.831846] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1425.831848] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1426.170583] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 1426.173263] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 1426.174693] wlan0: authenticated
>[ 1426.176282] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1426.179044] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 1426.181394] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=13)
>[ 1426.183072] wlan0: associated
>[ 1714.211443] wlan0: deauthenticating from b8:62:1f:45:2c:20 by local choice (reason=1)
>[ 1714.228292] cfg80211: Calling CRDA to update world regulatory domain
>[ 1714.234382] cfg80211: World regulatory domain updated:
>[ 1714.234388] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1714.234392] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1714.234395] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1714.234398] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1714.234401] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1714.234403] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1714.235080] cfg80211: Calling CRDA for country: PT
>[ 1714.241358] cfg80211: Regulatory domain changed to country: PT
>[ 1714.241363] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1714.241366] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1714.241369] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1714.241372] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1714.241374] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1718.170416] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 1718.171515] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 1718.172996] wlan0: authenticated
>[ 1718.173951] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1718.175023] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 1718.177824] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=13)
>[ 1718.179218] wlan0: associated
>[ 1738.783099] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1738.784820] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1738.786232] wlan0: authenticated
>[ 1738.791418] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1738.793030] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1738.795229] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=10)
>[ 1738.797204] wlan0: associated
>[ 1978.818319] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 1978.838176] cfg80211: Calling CRDA to update world regulatory domain
>[ 1978.842814] cfg80211: World regulatory domain updated:
>[ 1978.842821] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1978.842824] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1978.842827] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1978.842830] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 1978.842833] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1978.842836] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 1978.842858] cfg80211: Calling CRDA for country: PT
>[ 1978.852941] cfg80211: Regulatory domain changed to country: PT
>[ 1978.852946] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 1978.852950] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1978.852953] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1978.852955] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 1978.852958] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 1979.663440] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 1979.663553] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1979.665251] wlan0: authenticated
>[ 1979.665776] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 1979.668031] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 1979.670888] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=10)
>[ 1979.673309] wlan0: associated
>[ 2322.291470] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 2322.308333] cfg80211: Calling CRDA to update world regulatory domain
>[ 2322.314733] cfg80211: World regulatory domain updated:
>[ 2322.314740] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2322.314746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2322.314750] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2322.314755] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 2322.314759] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2322.314764] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 2322.314789] cfg80211: Calling CRDA for country: PT
>[ 2322.332502] cfg80211: Regulatory domain changed to country: PT
>[ 2322.332507] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 2322.332510] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2322.332513] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2322.332516] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 2322.332518] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 2325.852807] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 2325.853273] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 2325.854904] wlan0: authenticated
>[ 2325.855334] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 2325.856114] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 2325.858962] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=10)
>[ 2325.861177] wlan0: associated
>[ 3059.387961] wlan0: deauthenticated from 00:1f:ca:2d:02:e0 (Reason: 10)
>[ 3059.407318] cfg80211: Calling CRDA to update world regulatory domain
>[ 3059.418453] cfg80211: World regulatory domain updated:
>[ 3059.418460] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3059.418465] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3059.418470] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3059.418474] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3059.418478] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3059.418483] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3059.418516] cfg80211: Calling CRDA for country: PT
>[ 3059.424186] cfg80211: Regulatory domain changed to country: PT
>[ 3059.424191] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3059.424194] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3059.424197] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3059.424199] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3059.424202] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 3059.937726] wlan0: authenticate with 00:1f:ca:46:44:30
>[ 3059.939424] wlan0: direct probe to 00:1f:ca:46:44:30 (try 1/3)
>[ 3060.140053] wlan0: send auth to 00:1f:ca:46:44:30 (try 2/3)
>[ 3060.140776] wlan0: authenticated
>[ 3060.142081] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3060.143045] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[ 3060.144455] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[ 3060.146119] wlan0: associated
>[ 3075.292737] wlan0: deauthenticating from 00:1f:ca:46:44:30 by local choice (reason=3)
>[ 3075.297589] cfg80211: Calling CRDA to update world regulatory domain
>[ 3075.309840] cfg80211: World regulatory domain updated:
>[ 3075.309845] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3075.309849] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3075.309852] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3075.309855] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3075.309858] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3075.309861] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3075.309881] cfg80211: Calling CRDA for country: PT
>[ 3075.321224] cfg80211: Regulatory domain changed to country: PT
>[ 3075.321228] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3075.321232] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3075.321234] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3075.321237] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3075.321240] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 3081.559701] wlan0: authenticate with 00:1f:ca:46:44:30
>[ 3081.559877] wlan0: send auth to 00:1f:ca:46:44:30 (try 1/3)
>[ 3081.560481] wlan0: authenticated
>[ 3081.560924] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3081.563027] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[ 3081.564928] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[ 3081.566576] wlan0: associated
>[ 3103.004397] wlan0: deauthenticating from 00:1f:ca:46:44:30 by local choice (reason=3)
>[ 3103.009485] cfg80211: Calling CRDA to update world regulatory domain
>[ 3103.017650] cfg80211: World regulatory domain updated:
>[ 3103.017657] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3103.017662] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3103.017667] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3103.017671] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3103.017676] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3103.017680] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3103.017705] cfg80211: Calling CRDA for country: PT
>[ 3103.027672] cfg80211: Regulatory domain changed to country: PT
>[ 3103.027677] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3103.027680] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3103.027683] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3103.027685] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3103.027688] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 3526.541392] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 3526.543660] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 3526.546571] wlan0: authenticated
>[ 3526.547705] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3526.549031] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 3526.552697] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=8)
>[ 3526.555104] wlan0: associated
>[ 3572.500772] wlan0: authenticate with 00:1f:ca:46:44:30
>[ 3572.502237] wlan0: direct probe to 00:1f:ca:46:44:30 (try 1/3)
>[ 3572.703021] wlan0: send auth to 00:1f:ca:46:44:30 (try 2/3)
>[ 3572.703616] wlan0: authenticated
>[ 3572.704062] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3572.705021] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[ 3572.706243] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[ 3572.707630] wlan0: associated
>[ 3579.513023] ieee80211 phy0: wlan0: No probe response from AP 00:1f:ca:46:44:30 after 500ms, disconnecting.
>[ 3579.520684] cfg80211: Calling CRDA to update world regulatory domain
>[ 3579.525737] cfg80211: World regulatory domain updated:
>[ 3579.525742] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3579.525746] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3579.525749] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3579.525752] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 3579.525755] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3579.525758] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 3579.525781] cfg80211: Calling CRDA for country: PT
>[ 3579.535845] cfg80211: Regulatory domain changed to country: PT
>[ 3579.535849] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 3579.535853] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3579.535855] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3579.535858] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 3579.535861] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 3579.804500] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 3579.818411] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 3579.827059] wlan0: authenticated
>[ 3579.830790] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 3579.832026] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 3579.839031] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=8)
>[ 3579.840621] wlan0: associated
>[ 6947.946805] wlan0: deauthenticating from b8:62:1f:45:2c:20 by local choice (reason=1)
>[ 6947.966220] cfg80211: Calling CRDA to update world regulatory domain
>[ 6948.040911] cfg80211: World regulatory domain updated:
>[ 6948.040916] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6948.040919] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6948.040922] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6948.040925] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6948.040928] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6948.040931] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6948.040951] cfg80211: Calling CRDA for country: PT
>[ 6948.044295] cfg80211: Regulatory domain changed to country: PT
>[ 6948.044300] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6948.044303] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6948.044306] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6948.044309] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6948.044311] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 6952.423153] wlan0: authenticate with b8:62:1f:62:4f:d0
>[ 6952.426042] wlan0: direct probe to b8:62:1f:62:4f:d0 (try 1/3)
>[ 6952.627047] wlan0: direct probe to b8:62:1f:62:4f:d0 (try 2/3)
>[ 6952.828046] wlan0: send auth to b8:62:1f:62:4f:d0 (try 3/3)
>[ 6952.828775] wlan0: authenticated
>[ 6952.829676] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 6952.831020] wlan0: associate with b8:62:1f:62:4f:d0 (try 1/3)
>[ 6952.832282] wlan0: RX AssocResp from b8:62:1f:62:4f:d0 (capab=0x111 status=0 aid=3)
>[ 6952.834170] wlan0: associated
>[ 6963.580930] wlan0: deauthenticating from b8:62:1f:62:4f:d0 by local choice (reason=3)
>[ 6963.586671] cfg80211: Calling CRDA to update world regulatory domain
>[ 6963.601810] cfg80211: World regulatory domain updated:
>[ 6963.601816] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6963.601819] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6963.601823] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6963.601826] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 6963.601828] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6963.601831] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 6963.601854] cfg80211: Calling CRDA for country: PT
>[ 6963.610559] cfg80211: Regulatory domain changed to country: PT
>[ 6963.610564] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 6963.610568] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6963.610570] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6963.610573] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 6963.610576] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 6972.040295] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 6972.042169] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 6972.044191] wlan0: authenticated
>[ 6972.044808] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 6972.055043] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 6972.057516] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=4)
>[ 6972.059431] wlan0: associated
>[ 8158.553788] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8158.555481] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8158.556917] wlan0: authenticated
>[ 8158.565271] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8158.566055] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8158.568533] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=8)
>[ 8158.570600] wlan0: associated
>[ 8203.861944] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[ 8203.883735] cfg80211: Calling CRDA to update world regulatory domain
>[ 8203.897357] cfg80211: World regulatory domain updated:
>[ 8203.897366] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8203.897371] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8203.897376] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8203.897380] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8203.897384] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8203.897389] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8203.897416] cfg80211: Calling CRDA for country: PT
>[ 8203.902264] cfg80211: Regulatory domain changed to country: PT
>[ 8203.902270] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8203.902273] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8203.902275] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8203.902278] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8203.902281] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8205.328802] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 8212.414439] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8212.415581] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8212.417144] wlan0: authenticated
>[ 8212.417793] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8212.419038] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8212.422003] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=8)
>[ 8212.423708] wlan0: associated
>[ 8212.423754] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 8257.159164] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 8257.172178] cfg80211: Calling CRDA to update world regulatory domain
>[ 8257.194339] cfg80211: World regulatory domain updated:
>[ 8257.194345] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8257.194349] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8257.194352] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8257.194355] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8257.194358] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8257.194361] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8257.194390] cfg80211: Calling CRDA for country: PT
>[ 8257.198864] cfg80211: Regulatory domain changed to country: PT
>[ 8257.198869] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8257.198873] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8257.198875] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8257.198878] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8257.198881] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8260.722814] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8260.722923] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8260.724345] wlan0: authenticated
>[ 8260.727701] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8260.729041] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8260.731860] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=8)
>[ 8260.733691] wlan0: associated
>[ 8425.371745] wlan0: deauthenticated from 00:1f:ca:2d:02:e0 (Reason: 10)
>[ 8425.393633] cfg80211: Calling CRDA to update world regulatory domain
>[ 8425.400300] cfg80211: World regulatory domain updated:
>[ 8425.400307] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8425.400313] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8425.400317] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8425.400322] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8425.400326] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8425.400331] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8425.400356] cfg80211: Calling CRDA for country: PT
>[ 8425.406098] cfg80211: Regulatory domain changed to country: PT
>[ 8425.406104] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8425.406109] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8425.406113] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8425.406117] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8425.406121] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8425.606055] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 8425.608434] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 8425.609892] wlan0: authenticated
>[ 8425.610501] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8425.612037] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 8425.614207] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=8)
>[ 8425.616074] wlan0: associated
>[ 8567.214127] wlan0: deauthenticating from b8:62:1f:45:2c:20 by local choice (reason=1)
>[ 8567.228664] cfg80211: Calling CRDA to update world regulatory domain
>[ 8567.245251] cfg80211: World regulatory domain updated:
>[ 8567.245256] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8567.245260] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8567.245263] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8567.245266] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8567.245269] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8567.245272] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8567.245295] cfg80211: Calling CRDA for country: PT
>[ 8567.248931] cfg80211: Regulatory domain changed to country: PT
>[ 8567.248936] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8567.248940] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8567.248942] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8567.248945] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8567.248948] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8570.777766] wlan0: authenticate with b8:62:1f:45:2c:20
>[ 8570.778677] wlan0: send auth to b8:62:1f:45:2c:20 (try 1/3)
>[ 8570.780134] wlan0: authenticated
>[ 8570.780635] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8570.782033] wlan0: associate with b8:62:1f:45:2c:20 (try 1/3)
>[ 8570.784832] wlan0: RX AssocResp from b8:62:1f:45:2c:20 (capab=0x431 status=0 aid=8)
>[ 8570.786341] wlan0: associated
>[ 8647.800797] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8647.802526] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8647.803957] wlan0: authenticated
>[ 8647.804653] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8647.806042] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8647.808250] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 8647.809700] wlan0: associated
>[ 8693.145952] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[ 8693.165319] cfg80211: Calling CRDA to update world regulatory domain
>[ 8698.168209] cfg80211: Calling CRDA to update world regulatory domain
>[ 8698.319051] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
>[ 8698.319055] iwl3945: Copyright(c) 2003-2011 Intel Corporation
>[ 8698.343480] cfg80211: World regulatory domain updated:
>[ 8698.343484] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8698.343488] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8698.343491] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8698.343494] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8698.343497] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8698.343499] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8698.372358] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>[ 8698.372365] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
>[ 8698.372529] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
>[ 8698.372774] Registered led device: phy0-led
>[ 8698.372988] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>[ 8698.516886] input: HP WMI hotkeys as /devices/virtual/input/input14
>[ 8698.541613] cfg80211: Calling CRDA for country: PT
>[ 8698.545616] cfg80211: Regulatory domain changed to country: PT
>[ 8698.545621] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8698.545624] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8698.545627] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8698.545630] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8698.545632] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8698.774946] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
>[ 8698.841756] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 8698.926757] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 8698.998354] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 8706.082278] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8706.083334] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8706.084812] wlan0: authenticated
>[ 8706.084844] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8706.086025] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8706.088818] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 8706.091031] wlan0: associated
>[ 8706.091070] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 8712.187441] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 8712.207356] cfg80211: Calling CRDA to update world regulatory domain
>[ 8712.369882] cfg80211: World regulatory domain updated:
>[ 8712.369887] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8712.369891] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8712.369894] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8712.369897] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 8712.369900] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8712.369902] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 8712.369918] cfg80211: Calling CRDA for country: PT
>[ 8712.373600] cfg80211: Regulatory domain changed to country: PT
>[ 8712.373605] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 8712.373609] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8712.373611] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8712.373614] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 8712.373617] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 8715.818596] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 8715.820562] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8715.821978] wlan0: authenticated
>[ 8715.822033] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 8715.823031] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 8715.825786] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 8715.827555] wlan0: associated
>[ 9707.473922] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[ 9707.507279] cfg80211: Calling CRDA to update world regulatory domain
>[ 9707.697482] cfg80211: World regulatory domain updated:
>[ 9707.697487] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9707.697491] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9707.697494] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9707.697497] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9707.697500] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9707.697502] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9707.697521] cfg80211: Calling CRDA for country: PT
>[ 9707.700986] cfg80211: Regulatory domain changed to country: PT
>[ 9707.700991] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9707.700994] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9707.700997] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9707.701000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9707.701027] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9712.193106] cfg80211: Calling CRDA to update world regulatory domain
>[ 9712.274078] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
>[ 9712.274083] iwl3945: Copyright(c) 2003-2011 Intel Corporation
>[ 9712.326212] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>[ 9712.326218] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
>[ 9712.326380] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
>[ 9712.326616] Registered led device: phy0-led
>[ 9712.326824] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>[ 9712.354810] input: HP WMI hotkeys as /devices/virtual/input/input15
>[ 9712.382328] cfg80211: World regulatory domain updated:
>[ 9712.382335] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9712.382339] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9712.382342] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9712.382345] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9712.382348] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9712.382351] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9712.413443] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
>[ 9712.443274] cfg80211: Calling CRDA for country: PT
>[ 9712.448151] cfg80211: Regulatory domain changed to country: PT
>[ 9712.448156] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9712.448160] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9712.448162] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9712.448165] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9712.448167] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9712.487772] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9712.566091] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9712.639241] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9719.753207] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 9719.753411] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9719.754812] wlan0: authenticated
>[ 9719.754842] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 9719.756025] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9719.759330] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 9719.761469] wlan0: associated
>[ 9719.761507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 9799.739211] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[ 9799.761340] cfg80211: Calling CRDA to update world regulatory domain
>[ 9799.926891] cfg80211: World regulatory domain updated:
>[ 9799.926896] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9799.926900] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9799.926903] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9799.926906] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9799.926909] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9799.926912] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9799.926929] cfg80211: Calling CRDA for country: PT
>[ 9799.930161] cfg80211: Regulatory domain changed to country: PT
>[ 9799.930166] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9799.930169] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9799.930172] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9799.930174] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9799.930177] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9804.457677] cfg80211: Calling CRDA to update world regulatory domain
>[ 9804.526734] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds
>[ 9804.526739] iwl3945: Copyright(c) 2003-2011 Intel Corporation
>[ 9804.578084] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
>[ 9804.578090] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
>[ 9804.578251] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
>[ 9804.578459] Registered led device: phy0-led
>[ 9804.578657] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
>[ 9804.600069] input: HP WMI hotkeys as /devices/virtual/input/input16
>[ 9804.689869] cfg80211: World regulatory domain updated:
>[ 9804.689874] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9804.689878] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9804.689881] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9804.689884] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9804.689887] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9804.689890] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9804.692210] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
>[ 9804.726027] cfg80211: Calling CRDA for country: PT
>[ 9804.760291] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9804.778737] cfg80211: Regulatory domain changed to country: PT
>[ 9804.778741] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9804.778745] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9804.778747] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9804.778750] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9804.778753] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9804.851315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9804.923813] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[ 9810.133406] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 9810.133601] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9810.135828] wlan0: authenticated
>[ 9810.135853] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 9810.137041] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9810.140461] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 9810.142079] wlan0: associated
>[ 9810.142113] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[ 9838.946506] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=1)
>[ 9838.962140] cfg80211: Calling CRDA to update world regulatory domain
>[ 9839.167915] cfg80211: World regulatory domain updated:
>[ 9839.167920] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9839.167924] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9839.167927] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9839.167930] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9839.167933] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9839.167936] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9839.167952] cfg80211: Calling CRDA for country: PT
>[ 9839.171388] cfg80211: Regulatory domain changed to country: PT
>[ 9839.171392] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9839.171396] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9839.171399] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9839.171401] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9839.171404] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9841.649738] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 9841.651663] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9841.656139] wlan0: authenticated
>[ 9841.656169] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 9841.657029] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9841.660215] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 9841.661901] wlan0: associated
>[ 9854.296382] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[ 9854.316115] cfg80211: Calling CRDA to update world regulatory domain
>[ 9854.493687] cfg80211: World regulatory domain updated:
>[ 9854.493692] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9854.493695] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9854.493698] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9854.493701] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[ 9854.493704] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9854.493707] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[ 9854.493724] cfg80211: Calling CRDA for country: PT
>[ 9854.500717] cfg80211: Regulatory domain changed to country: PT
>[ 9854.500723] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[ 9854.500726] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9854.500729] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9854.500731] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[ 9854.500734] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[ 9859.666390] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[ 9859.668054] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9859.869026] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 2/3)
>[ 9859.880626] wlan0: authenticated
>[ 9859.880670] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[ 9859.882050] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[ 9859.907421] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=5)
>[ 9859.909836] wlan0: associated
>[10100.004514] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[10100.012086] cfg80211: Calling CRDA to update world regulatory domain
>[10100.015599] wlan0: authenticate with 00:1f:ca:46:44:30
>[10100.026656] wlan0: send auth to 00:1f:ca:46:44:30 (try 1/3)
>[10100.027265] wlan0: authenticated
>[10100.027296] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[10100.028098] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[10100.029323] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[10100.031099] wlan0: associated
>[10100.169854] cfg80211: World regulatory domain updated:
>[10100.169859] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10100.169863] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10100.169866] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10100.169869] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10100.169872] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10100.169875] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10100.169889] cfg80211: Calling CRDA for country: PT
>[10100.173454] cfg80211: Regulatory domain changed to country: PT
>[10100.173458] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10100.173461] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10100.173464] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10100.173467] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10100.173470] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[10130.020335] wlan0: deauthenticated from 00:1f:ca:46:44:30 (Reason: 23)
>[10130.022880] cfg80211: Calling CRDA to update world regulatory domain
>[10130.168243] cfg80211: World regulatory domain updated:
>[10130.168248] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10130.168251] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10130.168254] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10130.168258] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10130.168260] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10130.168263] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10130.168279] cfg80211: Calling CRDA for country: PT
>[10130.171659] cfg80211: Regulatory domain changed to country: PT
>[10130.171663] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10130.171666] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10130.171669] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10130.171672] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10130.171675] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[10132.677473] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[10132.680354] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[10132.742792] wlan0: authenticated
>[10132.742835] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[10132.745038] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[10132.768561] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=3)
>[10132.774526] wlan0: associated
>[10179.262503] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[10179.274207] cfg80211: Calling CRDA to update world regulatory domain
>[10179.491763] cfg80211: World regulatory domain updated:
>[10179.491768] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10179.491772] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10179.491775] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10179.491778] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10179.491781] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10179.491784] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10179.491801] cfg80211: Calling CRDA for country: PT
>[10179.500117] cfg80211: Regulatory domain changed to country: PT
>[10179.500122] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10179.500125] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10179.500128] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10179.500130] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10179.500133] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[10182.031745] PM: Syncing filesystems ... done.
>[10182.048985] PM: Preparing system for mem sleep
>[10182.355270] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[10182.389187] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[10182.400173] PM: Entering mem sleep
>[10182.400202] Suspending console(s) (use no_console_suspend to debug)
>[10182.433668] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[10182.559312] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[10182.560247] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[10182.749153] sd 0:0:0:0: [sda] Stopping disk
>[10183.712553] PM: suspend of devices complete after 1279.035 msecs
>[10183.712795] PM: late suspend of devices complete after 0.238 msecs
>[10183.768229] PM: noirq suspend of devices complete after 55.430 msecs
>[10183.768511] ACPI: Preparing to enter system sleep state S3
>[10183.770128] PM: Saving platform NVS memory
>[10183.770219] Disabling non-boot CPUs ...
>[10183.771669] smpboot: CPU 1 is now offline
>[10183.772685] CPU 1 offline: Remove Rx thread
>[10183.772816] Extended CMOS year: 2000
>[10183.772816] ACPI: Low-level resume complete
>[10183.772816] PM: Restoring platform NVS memory
>[10183.772816] Extended CMOS year: 2000
>[10183.772816] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[10183.773174] Enabling non-boot CPUs ...
>[10183.773282] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[10183.771513] Initializing CPU#1
>[10183.785659] bnx2i: CPU 1 online: Create Rx thread
>[10183.785983] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[10183.786028] CPU1 is up
>[10183.787675] ACPI: Waking up from system sleep state S3
>[10183.880084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[10183.880086] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[10183.902260] PM: noirq resume of devices complete after 110.083 msecs
>[10183.902437] PM: early resume of devices complete after 0.098 msecs
>[10183.902472] i915 0000:00:02.0: setting latency timer to 64
>[10183.902797] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[10183.903003] usb usb3: root hub lost power or was reset
>[10183.903232] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[10183.903596] usb usb4: root hub lost power or was reset
>[10183.903971] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[10183.905655] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[10183.906815] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[10183.907005] usb usb5: root hub lost power or was reset
>[10183.907160] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[10183.907520] usb usb6: root hub lost power or was reset
>[10183.907844] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[10183.908003] usb usb7: root hub lost power or was reset
>[10183.908276] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[10183.908456] pci 0000:00:1e.0: setting latency timer to 64
>[10183.908471] ata_piix 0000:00:1f.1: setting latency timer to 64
>[10183.908485] ahci 0000:00:1f.2: setting latency timer to 64
>[10183.908926] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10183.909941] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10183.981736] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[10184.184811] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[10184.184815] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[10184.206695] ata4.00: configured for MWDMA2
>[10184.215432] ata2: SATA link down (SStatus 0 SControl 300)
>[10184.216058] ata3: SATA link down (SStatus 0 SControl 300)
>[10184.377449] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
>[10184.463432] firewire_core 0000:09:09.0: rediscovered device fw0
>[10186.000541] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[10186.001476] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[10186.002605] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[10186.002610] ata1.00: configured for UDMA/100
>[10186.013568] sd 0:0:0:0: [sda] Starting disk
>[10186.030497] PM: resume of devices complete after 2128.055 msecs
>[10186.041695] PM: Finishing wakeup.
>[10186.041698] Restarting tasks ... done.
>[10186.083233] video LNXVIDEO:01: Restoring backlight state
>[10186.141186] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10186.201086] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10186.260068] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10186.319029] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10186.434212] r8169 0000:08:00.0: p3p1: link down
>[10186.434267] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[10186.557279] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10186.634880] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10186.710495] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10191.868378] wlan0: authenticate with 00:0e:84:af:9e:00
>[10191.871121] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[10191.872546] wlan0: authenticated
>[10191.872574] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[10191.874030] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[10191.875839] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=118)
>[10191.877406] wlan0: associated
>[10191.877439] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[10862.209395] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[10862.236160] cfg80211: Calling CRDA to update world regulatory domain
>[10862.491283] cfg80211: World regulatory domain updated:
>[10862.491288] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10862.491292] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10862.491295] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10862.491298] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[10862.491301] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10862.491304] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[10862.491317] cfg80211: Calling CRDA for country: PT
>[10862.499271] cfg80211: Regulatory domain changed to country: PT
>[10862.499277] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[10862.499280] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10862.499283] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10862.499286] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[10862.499288] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[10864.542793] PM: Syncing filesystems ... done.
>[10864.558320] PM: Preparing system for mem sleep
>[10864.641279] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[10864.653651] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[10864.664605] PM: Entering mem sleep
>[10864.664638] Suspending console(s) (use no_console_suspend to debug)
>[10864.698106] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[10864.824664] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[10864.825566] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[10864.843609] sd 0:0:0:0: [sda] Stopping disk
>[10865.784557] PM: suspend of devices complete after 1086.609 msecs
>[10865.784793] PM: late suspend of devices complete after 0.231 msecs
>[10865.840230] PM: noirq suspend of devices complete after 55.432 msecs
>[10865.840517] ACPI: Preparing to enter system sleep state S3
>[10865.842126] PM: Saving platform NVS memory
>[10865.842222] Disabling non-boot CPUs ...
>[10865.843678] smpboot: CPU 1 is now offline
>[10865.844667] CPU 1 offline: Remove Rx thread
>[10865.844667] Extended CMOS year: 2000
>[10865.844667] ACPI: Low-level resume complete
>[10865.844667] PM: Restoring platform NVS memory
>[10865.844667] Extended CMOS year: 2000
>[10865.844667] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[10865.845217] Enabling non-boot CPUs ...
>[10865.845325] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[10865.843521] Initializing CPU#1
>[10865.857688] bnx2i: CPU 1 online: Create Rx thread
>[10865.858014] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[10865.858037] CPU1 is up
>[10865.859692] ACPI: Waking up from system sleep state S3
>[10865.952084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[10865.952087] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[10865.974257] PM: noirq resume of devices complete after 110.086 msecs
>[10865.974435] PM: early resume of devices complete after 0.098 msecs
>[10865.974471] i915 0000:00:02.0: setting latency timer to 64
>[10865.974611] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[10865.974758] usb usb3: root hub lost power or was reset
>[10865.975016] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[10865.975458] usb usb4: root hub lost power or was reset
>[10865.975606] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[10865.977472] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[10865.978535] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[10865.978641] usb usb5: root hub lost power or was reset
>[10865.978909] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[10865.979004] usb usb6: root hub lost power or was reset
>[10865.979195] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[10865.979472] usb usb7: root hub lost power or was reset
>[10865.979708] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[10865.979840] pci 0000:00:1e.0: setting latency timer to 64
>[10865.980037] ata_piix 0000:00:1f.1: setting latency timer to 64
>[10865.980175] ahci 0000:00:1f.2: setting latency timer to 64
>[10865.980804] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10865.981819] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10866.051464] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[10866.256496] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[10866.256499] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[10866.278403] ata4.00: configured for MWDMA2
>[10866.287123] ata3: SATA link down (SStatus 0 SControl 300)
>[10866.287151] ata2: SATA link down (SStatus 0 SControl 300)
>[10866.449106] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
>[10866.534123] firewire_core 0000:09:09.0: rediscovered device fw0
>[10868.122519] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[10868.123434] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[10868.185329] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[10868.185334] ata1.00: configured for UDMA/100
>[10868.196557] sd 0:0:0:0: [sda] Starting disk
>[10868.289498] PM: resume of devices complete after 2315.055 msecs
>[10868.300228] PM: Finishing wakeup.
>[10868.300231] Restarting tasks ... done.
>[10868.329418] video LNXVIDEO:01: Restoring backlight state
>[10868.388062] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10868.448027] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10868.506170] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10868.565082] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[10868.714403] r8169 0000:08:00.0: p3p1: link down
>[10868.714531] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[10868.874802] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10868.965343] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10869.039327] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[10874.149585] wlan0: authenticate with 00:0e:84:af:9e:00
>[10874.149753] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[10874.151182] wlan0: authenticated
>[10874.151206] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[10874.152027] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[10874.153830] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=128)
>[10874.155242] wlan0: associated
>[10874.155272] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[18258.242726] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[18258.265983] cfg80211: Calling CRDA to update world regulatory domain
>[18265.713476] cfg80211: World regulatory domain updated:
>[18265.713482] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[18265.713485] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[18265.713488] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[18265.713492] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[18265.713494] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[18265.713497] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[18265.713511] cfg80211: Calling CRDA for country: PT
>[18266.207642] cfg80211: Regulatory domain changed to country: PT
>[18266.207647] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[18266.207650] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[18266.207653] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[18266.207656] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[18266.207658] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[18267.529572] PM: Syncing filesystems ... done.
>[18268.058450] PM: Preparing system for mem sleep
>[18268.266814] Freezing user space processes ... (elapsed 0.02 seconds) done.
>[18268.289239] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[18268.300230] PM: Entering mem sleep
>[18268.300268] Suspending console(s) (use no_console_suspend to debug)
>[18268.333685] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[18268.371049] sd 0:0:0:0: [sda] Stopping disk
>[18268.461755] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[18268.462668] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[18269.291546] PM: suspend of devices complete after 958.010 msecs
>[18269.291789] PM: late suspend of devices complete after 0.237 msecs
>[18269.347229] PM: noirq suspend of devices complete after 55.436 msecs
>[18269.347514] ACPI: Preparing to enter system sleep state S3
>[18269.349127] PM: Saving platform NVS memory
>[18269.349223] Disabling non-boot CPUs ...
>[18269.350601] smpboot: CPU 1 is now offline
>[18269.351639] CPU 1 offline: Remove Rx thread
>[18269.351772] Extended CMOS year: 2000
>[18269.351772] ACPI: Low-level resume complete
>[18269.351772] PM: Restoring platform NVS memory
>[18269.351772] Extended CMOS year: 2000
>[18269.351772] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[18269.352155] Enabling non-boot CPUs ...
>[18269.352256] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[18269.350013] Initializing CPU#1
>[18269.365015] bnx2i: CPU 1 online: Create Rx thread
>[18269.365339] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[18269.366023] CPU1 is up
>[18269.367649] ACPI: Waking up from system sleep state S3
>[18269.459080] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[18269.459082] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[18269.481255] PM: noirq resume of devices complete after 110.087 msecs
>[18269.481434] PM: early resume of devices complete after 0.099 msecs
>[18269.481470] i915 0000:00:02.0: setting latency timer to 64
>[18269.481878] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[18269.482010] usb usb3: root hub lost power or was reset
>[18269.482311] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[18269.482550] usb usb4: root hub lost power or was reset
>[18269.482819] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[18269.483943] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[18269.485070] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[18269.485213] usb usb5: root hub lost power or was reset
>[18269.485439] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[18269.485854] usb usb6: root hub lost power or was reset
>[18269.486050] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[18269.486326] usb usb7: root hub lost power or was reset
>[18269.486474] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[18269.486701] pci 0000:00:1e.0: setting latency timer to 64
>[18269.487013] ata_piix 0000:00:1f.1: setting latency timer to 64
>[18269.487131] ahci 0000:00:1f.2: setting latency timer to 64
>[18269.487678] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18269.488693] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18269.558553] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[18269.762627] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[18269.762631] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[18269.784525] ata4.00: configured for MWDMA2
>[18269.793230] ata3: SATA link down (SStatus 0 SControl 300)
>[18269.793261] ata2: SATA link down (SStatus 0 SControl 300)
>[18269.956250] usb 4-2: reset low-speed USB device number 2 using uhci_hcd
>[18270.041236] firewire_core 0000:09:09.0: rediscovered device fw0
>[18271.578501] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[18271.579437] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[18271.580542] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[18271.580546] ata1.00: configured for UDMA/100
>[18271.591565] sd 0:0:0:0: [sda] Starting disk
>[18271.606040] Extended CMOS year: 2000
>[18271.609235] PM: resume of devices complete after 2127.796 msecs
>[18271.620197] PM: Finishing wakeup.
>[18271.620199] Restarting tasks ... done.
>[18271.674846] video LNXVIDEO:01: Restoring backlight state
>[18271.733033] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18271.793027] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18271.852709] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18271.912030] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[18271.979196] r8169 0000:08:00.0: p3p1: link down
>[18271.981287] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[18272.112855] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[18272.194434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[18272.269064] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[18277.707505] wlan0: authenticate with 00:14:a9:9d:16:50
>[18277.709376] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[18277.711123] wlan0: authenticated
>[18277.711156] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[18277.712033] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[18277.716096] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=26)
>[18277.719457] wlan0: associated
>[18277.719497] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[20154.639574] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[20154.664386] cfg80211: Calling CRDA to update world regulatory domain
>[20154.671424] wlan0: authenticate with 00:14:a9:9d:1c:a0
>[20154.674397] wlan0: direct probe to 00:14:a9:9d:1c:a0 (try 1/3)
>[20157.346794] wlan0: send auth to 00:14:a9:9d:1c:a0 (try 2/3)
>[20157.352650] wlan0: authenticate with 00:14:a9:9d:16:50
>[20157.354529] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[20157.356468] wlan0: authenticated
>[20157.356492] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[20157.358040] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[20157.361917] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=26)
>[20157.368469] wlan0: associated
>[20159.110960] cfg80211: World regulatory domain updated:
>[20159.110965] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[20159.110968] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20159.110971] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[20159.110974] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[20159.110977] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20159.110980] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[20159.110993] cfg80211: Calling CRDA for country: PT
>[20160.192937] cfg80211: Regulatory domain changed to country: PT
>[20160.192942] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[20160.192945] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[20160.192948] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[20160.192950] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[20160.192953] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24114.599374] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[24114.615743] cfg80211: Calling CRDA to update world regulatory domain
>[24114.618453] wlan0: authenticate with 00:14:a9:9d:2b:a0
>[24114.621422] wlan0: send auth to 00:14:a9:9d:2b:a0 (try 1/3)
>[24114.622839] wlan0: authenticated
>[24114.622872] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24114.624043] wlan0: associate with 00:14:a9:9d:2b:a0 (try 1/3)
>[24114.626468] wlan0: RX AssocResp from 00:14:a9:9d:2b:a0 (capab=0x431 status=0 aid=3)
>[24114.627956] wlan0: associated
>[24118.837838] cfg80211: World regulatory domain updated:
>[24118.837844] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24118.837848] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24118.837851] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24118.837854] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24118.837857] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24118.837860] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24118.837872] cfg80211: Calling CRDA for country: PT
>[24119.876039] cfg80211: Regulatory domain changed to country: PT
>[24119.876043] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24119.876047] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24119.876050] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24119.876052] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24119.876055] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24124.632713] wlan0: deauthenticating from 00:14:a9:9d:2b:a0 by local choice (reason=3)
>[24124.642172] cfg80211: Calling CRDA to update world regulatory domain
>[24125.017802] cfg80211: World regulatory domain updated:
>[24125.017807] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24125.017810] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24125.017814] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24125.017817] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24125.017820] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24125.017822] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24125.017843] cfg80211: Calling CRDA for country: PT
>[24125.028156] cfg80211: Regulatory domain changed to country: PT
>[24125.028161] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24125.028164] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24125.028167] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24125.028169] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24125.028172] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24128.184919] wlan0: authenticate with 00:14:a9:9d:16:50
>[24128.186603] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[24128.188398] wlan0: authenticated
>[24128.188433] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24128.191032] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[24128.195581] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=26)
>[24128.199021] wlan0: associated
>[24594.327722] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[24594.345812] cfg80211: Calling CRDA to update world regulatory domain
>[24594.349663] wlan0: authenticate with 00:15:2b:62:0e:80
>[24594.355229] wlan0: send auth to 00:15:2b:62:0e:80 (try 1/3)
>[24597.045538] wlan0: send auth to 00:15:2b:62:0e:80 (try 2/3)
>[24597.056427] wlan0: authenticate with 00:14:a9:9d:16:50
>[24597.056735] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[24597.058511] wlan0: authenticated
>[24597.058542] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24597.060040] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[24597.063896] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=26)
>[24597.069552] wlan0: associated
>[24603.414161] cfg80211: World regulatory domain updated:
>[24603.414166] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24603.414169] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24603.414172] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24603.414175] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24603.414178] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24603.414181] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24603.414195] cfg80211: Calling CRDA for country: PT
>[24604.159948] cfg80211: Regulatory domain changed to country: PT
>[24604.159952] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24604.159956] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24604.159959] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24604.159961] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24604.159964] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24607.071237] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[24607.078091] cfg80211: Calling CRDA to update world regulatory domain
>[24607.352323] cfg80211: World regulatory domain updated:
>[24607.352328] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24607.352332] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24607.352335] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24607.352338] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24607.352341] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24607.352344] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24607.352359] cfg80211: Calling CRDA for country: PT
>[24607.355905] cfg80211: Regulatory domain changed to country: PT
>[24607.355910] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24607.355913] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24607.355916] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24607.355918] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24607.355921] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24610.551264] wlan0: authenticate with 00:15:2b:21:cb:f0
>[24610.552954] wlan0: send auth to 00:15:2b:21:cb:f0 (try 1/3)
>[24610.556530] wlan0: authenticated
>[24610.556559] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24610.558036] wlan0: associate with 00:15:2b:21:cb:f0 (try 1/3)
>[24610.563374] wlan0: RX AssocResp from 00:15:2b:21:cb:f0 (capab=0x431 status=0 aid=9)
>[24610.564556] wlan0: associated
>[24610.594728] wlan0: deauthenticating from 00:15:2b:21:cb:f0 by local choice (reason=3)
>[24610.602857] cfg80211: Calling CRDA to update world regulatory domain
>[24610.769898] cfg80211: World regulatory domain updated:
>[24610.769903] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24610.769907] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24610.769910] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24610.769913] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24610.769916] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24610.769919] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24610.769938] cfg80211: Calling CRDA for country: PT
>[24610.773723] cfg80211: Regulatory domain changed to country: PT
>[24610.773728] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24610.773732] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24610.773735] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24610.773737] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24610.773740] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24615.981751] wlan0: authenticate with 00:15:2b:21:cb:f0
>[24615.983780] wlan0: send auth to 00:15:2b:21:cb:f0 (try 1/3)
>[24616.184051] wlan0: send auth to 00:15:2b:21:cb:f0 (try 2/3)
>[24616.188935] wlan0: authenticated
>[24616.188981] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24616.190049] wlan0: associate with 00:15:2b:21:cb:f0 (try 1/3)
>[24616.195620] wlan0: RX AssocResp from 00:15:2b:21:cb:f0 (capab=0x431 status=0 aid=9)
>[24616.197696] wlan0: associated
>[24626.281323] wlan0: deauthenticating from 00:15:2b:21:cb:f0 by local choice (reason=3)
>[24626.287163] cfg80211: Calling CRDA to update world regulatory domain
>[24626.543185] cfg80211: World regulatory domain updated:
>[24626.543190] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24626.543194] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24626.543197] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24626.543200] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24626.543203] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24626.543205] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24626.543223] cfg80211: Calling CRDA for country: PT
>[24626.546741] cfg80211: Regulatory domain changed to country: PT
>[24626.546746] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24626.546749] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24626.546752] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24626.546755] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24626.546757] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24629.852090] wlan0: authenticate with 00:17:5a:4f:93:30
>[24629.853758] wlan0: direct probe to 00:17:5a:4f:93:30 (try 1/3)
>[24630.054029] wlan0: direct probe to 00:17:5a:4f:93:30 (try 2/3)
>[24630.255046] wlan0: direct probe to 00:17:5a:4f:93:30 (try 3/3)
>[24630.456028] wlan0: authentication with 00:17:5a:4f:93:30 timed out
>[24644.236366] wlan0: authenticate with 00:14:a9:9d:16:50
>[24644.236494] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[24644.238303] wlan0: authenticated
>[24644.238328] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24644.240058] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[24644.243057] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=6)
>[24644.248165] wlan0: associated
>[24666.755111] gnome-shell[1308]: segfault at 20 ip 4ce67e06 sp bf9ab1f0 error 4 in libgnome-shell.so (deleted)[4ce36000+9a000]
>[24723.587769] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[24723.614195] cfg80211: Calling CRDA to update world regulatory domain
>[24726.024690] cfg80211: World regulatory domain updated:
>[24726.024695] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24726.024699] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24726.024702] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24726.024705] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24726.024708] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24726.024711] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24726.024989] cfg80211: Calling CRDA for country: PT
>[24726.027674] cfg80211: Regulatory domain changed to country: PT
>[24726.027678] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24726.027681] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24726.027684] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24726.027687] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24726.027689] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24726.562868] wlan0: authenticate with 00:14:a9:9d:16:50
>[24726.565265] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[24726.567072] wlan0: authenticated
>[24726.567103] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24726.568080] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[24726.572053] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=6)
>[24726.575744] wlan0: associated
>[24736.581176] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[24736.586205] cfg80211: Calling CRDA to update world regulatory domain
>[24736.811344] cfg80211: World regulatory domain updated:
>[24736.811349] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24736.811353] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24736.811356] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24736.811359] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[24736.811361] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24736.811364] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[24736.811379] cfg80211: Calling CRDA for country: PT
>[24736.819590] cfg80211: Regulatory domain changed to country: PT
>[24736.819594] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[24736.819597] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24736.819600] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24736.819603] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[24736.819606] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[24740.151975] wlan0: authenticate with 00:14:a9:9d:16:50
>[24740.156841] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[24740.158645] wlan0: authenticated
>[24740.159816] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[24740.161062] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[24740.165785] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=6)
>[24740.169369] wlan0: associated
>[25048.829605] wlan0: deauthenticating from 00:14:a9:9d:16:50 by local choice (reason=3)
>[25048.860602] cfg80211: Calling CRDA to update world regulatory domain
>[25050.517743] cfg80211: World regulatory domain updated:
>[25050.517747] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[25050.517751] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[25050.517754] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[25050.517757] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[25050.517768] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[25050.517771] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[25050.517785] cfg80211: Calling CRDA for country: PT
>[25050.521621] cfg80211: Regulatory domain changed to country: PT
>[25050.521626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[25050.521629] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[25050.521632] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[25050.521635] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[25050.521637] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[25052.550184] PM: Syncing filesystems ... done.
>[25052.554685] PM: Preparing system for mem sleep
>[25052.740167] Freezing user space processes ... (elapsed 0.06 seconds) done.
>[25052.807561] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[25052.818190] PM: Entering mem sleep
>[25052.818229] Suspending console(s) (use no_console_suspend to debug)
>[25052.852064] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[25052.961511] sd 0:0:0:0: [sda] Stopping disk
>[25052.980971] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[25052.981880] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[25053.892556] PM: suspend of devices complete after 1040.710 msecs
>[25053.892792] PM: late suspend of devices complete after 0.231 msecs
>[25053.948233] PM: noirq suspend of devices complete after 55.437 msecs
>[25053.948520] ACPI: Preparing to enter system sleep state S3
>[25053.950125] PM: Saving platform NVS memory
>[25053.950219] Disabling non-boot CPUs ...
>[25053.951671] smpboot: CPU 1 is now offline
>[25053.952719] CPU 1 offline: Remove Rx thread
>[25053.952856] Extended CMOS year: 2000
>[25053.952856] ACPI: Low-level resume complete
>[25053.952856] PM: Restoring platform NVS memory
>[25053.952856] Extended CMOS year: 2000
>[25053.952856] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[25053.953217] Enabling non-boot CPUs ...
>[25053.953324] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[25053.951514] Initializing CPU#1
>[25053.965694] bnx2i: CPU 1 online: Create Rx thread
>[25053.966020] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[25053.966044] CPU1 is up
>[25053.967693] ACPI: Waking up from system sleep state S3
>[25054.060083] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[25054.060085] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[25054.082258] PM: noirq resume of devices complete after 110.087 msecs
>[25054.082399] PM: early resume of devices complete after 0.098 msecs
>[25054.082448] i915 0000:00:02.0: setting latency timer to 64
>[25054.082615] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[25054.082724] usb usb3: root hub lost power or was reset
>[25054.082754] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[25054.082853] usb usb4: root hub lost power or was reset
>[25054.083288] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[25054.085480] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[25054.086368] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[25054.086469] usb usb5: root hub lost power or was reset
>[25054.086829] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[25054.087010] usb usb6: root hub lost power or was reset
>[25054.087170] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[25054.087484] usb usb7: root hub lost power or was reset
>[25054.087762] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[25054.087899] pci 0000:00:1e.0: setting latency timer to 64
>[25054.088014] ata_piix 0000:00:1f.1: setting latency timer to 64
>[25054.088382] ahci 0000:00:1f.2: setting latency timer to 64
>[25054.088842] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25054.089856] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25054.166903] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[25054.362797] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[25054.362800] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[25054.384661] ata4.00: configured for MWDMA2
>[25054.394372] ata3: SATA link down (SStatus 0 SControl 300)
>[25054.394404] ata2: SATA link down (SStatus 0 SControl 300)
>[25054.701065] firewire_core 0000:09:09.0: rediscovered device fw0
>[25056.234530] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[25056.235413] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[25056.296288] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[25056.296293] ata1.00: configured for UDMA/100
>[25056.383715] sd 0:0:0:0: [sda] Starting disk
>[25056.409221] PM: resume of devices complete after 2326.816 msecs
>[25056.420216] PM: Finishing wakeup.
>[25056.420294] usb 4-2: USB disconnect, device number 2
>[25056.420219] Restarting tasks ... done.
>[25056.458386] video LNXVIDEO:01: Restoring backlight state
>[25056.517172] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25056.575591] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25056.632427] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25056.690625] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[25056.902530] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[25057.146737] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[25057.219557] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[25057.459038] r8169 0000:08:00.0: p3p1: link down
>[25057.459218] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[25063.111581] wlan0: authenticate with 00:26:5b:09:2d:a8
>[25063.116979] wlan0: send auth to 00:26:5b:09:2d:a8 (try 1/3)
>[25063.118385] wlan0: authenticated
>[25063.118421] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[25063.120325] wlan0: associate with 00:26:5b:09:2d:a8 (try 1/3)
>[25063.122081] wlan0: RX AssocResp from 00:26:5b:09:2d:a8 (capab=0xc31 status=0 aid=3)
>[25063.123213] wlan0: associated
>[25063.123246] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[25081.104142] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
>[27829.986944] PM: Syncing filesystems ... done.
>[27830.782777] PM: Preparing system for mem sleep
>[27831.155195] Freezing user space processes ... (elapsed 0.06 seconds) done.
>[27831.222657] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[27831.233645] PM: Entering mem sleep
>[27831.233681] Suspending console(s) (use no_console_suspend to debug)
>[27831.246415] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[27831.247219] sd 0:0:0:0: [sda] Stopping disk
>[27831.372910] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[27831.373814] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[27832.176537] PM: suspend of devices complete after 931.700 msecs
>[27832.176774] PM: late suspend of devices complete after 0.232 msecs
>[27832.231229] PM: noirq suspend of devices complete after 54.451 msecs
>[27832.231518] ACPI: Preparing to enter system sleep state S3
>[27832.233132] PM: Saving platform NVS memory
>[27832.233224] Disabling non-boot CPUs ...
>[27832.234652] smpboot: CPU 1 is now offline
>[27832.235689] CPU 1 offline: Remove Rx thread
>[27832.235839] Extended CMOS year: 2000
>[27832.235839] ACPI: Low-level resume complete
>[27832.235839] PM: Restoring platform NVS memory
>[27832.235839] Extended CMOS year: 2000
>[27832.235839] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[27832.236196] Enabling non-boot CPUs ...
>[27832.236300] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[27832.234495] Initializing CPU#1
>[27832.248646] bnx2i: CPU 1 online: Create Rx thread
>[27832.248970] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[27832.249026] CPU1 is up
>[27832.250694] ACPI: Waking up from system sleep state S3
>[27832.343085] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[27832.343088] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[27832.365252] PM: noirq resume of devices complete after 110.080 msecs
>[27832.365426] PM: early resume of devices complete after 0.095 msecs
>[27832.365463] i915 0000:00:02.0: setting latency timer to 64
>[27832.365741] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[27832.366004] usb usb3: root hub lost power or was reset
>[27832.366223] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[27832.366411] usb usb4: root hub lost power or was reset
>[27832.366680] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[27832.368014] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[27832.369535] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[27832.369635] usb usb5: root hub lost power or was reset
>[27832.369765] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[27832.370008] usb usb6: root hub lost power or was reset
>[27832.370328] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[27832.370697] usb usb7: root hub lost power or was reset
>[27832.371015] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[27832.371215] pci 0000:00:1e.0: setting latency timer to 64
>[27832.371363] ata_piix 0000:00:1f.1: setting latency timer to 64
>[27832.371458] ahci 0000:00:1f.2: setting latency timer to 64
>[27832.371897] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27832.372912] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27832.443001] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[27832.476269] r8169 0000:08:00.0: p3p1: link down
>[27832.647516] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[27832.647519] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[27832.669384] ata4.00: configured for MWDMA2
>[27832.679135] ata3: SATA link down (SStatus 0 SControl 300)
>[27832.681128] ata2: SATA link down (SStatus 0 SControl 300)
>[27832.926125] firewire_core 0000:09:09.0: rediscovered device fw0
>[27834.463530] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[27834.464439] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[27834.465540] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[27834.465545] ata1.00: configured for UDMA/100
>[27834.476570] sd 0:0:0:0: [sda] Starting disk
>[27834.582582] wlan0: deauthenticated from 00:26:5b:09:2d:a8 (Reason: 6)
>[27834.583844] PM: resume of devices complete after 2218.412 msecs
>[27834.584171] PM: Finishing wakeup.
>[27834.605153] cfg80211: Calling CRDA to update world regulatory domain
>[27834.584173] Restarting tasks ... done.
>[27834.616767] video LNXVIDEO:01: Restoring backlight state
>[27834.674973] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27834.733470] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27834.790530] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27834.847585] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[27845.623388] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[27845.728218] r8169 0000:08:00.0: p3p1: link down
>[27845.728354] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[27845.803989] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[27845.873967] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[27846.620652] cfg80211: World regulatory domain updated:
>[27846.620657] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[27846.620661] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[27846.620664] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[27846.620667] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[27846.620670] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[27846.620673] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[27846.620684] cfg80211: Calling CRDA for country: PT
>[27846.624411] cfg80211: Regulatory domain changed to country: PT
>[27846.624415] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[27846.624418] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[27846.624421] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[27846.624423] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[27846.624426] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[27851.659343] wlan0: authenticate with 00:26:5b:09:2d:a8
>[27851.659535] wlan0: send auth to 00:26:5b:09:2d:a8 (try 1/3)
>[27851.660674] wlan0: authenticated
>[27851.660702] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[27851.662026] wlan0: associate with 00:26:5b:09:2d:a8 (try 1/3)
>[27851.663803] wlan0: RX AssocResp from 00:26:5b:09:2d:a8 (capab=0xc31 status=0 aid=3)
>[27851.664953] wlan0: associated
>[27851.664984] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[27940.153055] usb 1-4: new high-speed USB device number 5 using ehci_hcd
>[27940.267724] usb 1-4: New USB device found, idVendor=0409, idProduct=0058
>[27940.267729] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[27940.267733] usb 1-4: Product: USB2.0 Hub Controller
>[27940.267737] usb 1-4: Manufacturer: NEC Corporation
>[27940.272096] hub 1-4:1.0: USB hub found
>[27940.272206] hub 1-4:1.0: 4 ports detected
>[27940.545083] usb 1-4.2: new low-speed USB device number 6 using ehci_hcd
>[27940.634716] usb 1-4.2: New USB device found, idVendor=045e, idProduct=00f6
>[27940.634723] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[27940.634727] usb 1-4.2: Product: Comfort Optical Mouse 1000
>[27940.634730] usb 1-4.2: Manufacturer: Microsoft
>[27940.638333] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/input/input17
>[27940.638890] hid-generic 0003:045E:00F6.0005: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.7-4.2/input0
>[27940.712218] usb 1-4.4: new low-speed USB device number 7 using ehci_hcd
>[27940.821460] usb 1-4.4: New USB device found, idVendor=1241, idProduct=1603
>[27940.821465] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[27940.821469] usb 1-4.4: Product: USB Keyboard
>[27940.821473] usb 1-4.4: Manufacturer:  
>[27940.832534] input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input18
>[27940.832807] hid-generic 0003:1241:1603.0006: input,hidraw1: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1a.7-4.4/input0
>[27940.850676] input:   USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.1/input/input19
>[27940.851183] hid-generic 0003:1241:1603.0007: input,hidraw2: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1a.7-4.4/input1
>[30631.683350] wlan0: deauthenticating from 00:26:5b:09:2d:a8 by local choice (reason=3)
>[30631.711303] cfg80211: Calling CRDA to update world regulatory domain
>[30645.941076] PM: Syncing filesystems ... done.
>[30647.959352] PM: Preparing system for mem sleep
>[30650.279205] Freezing user space processes ... (elapsed 0.14 seconds) done.
>[30650.423256] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[30650.434253] PM: Entering mem sleep
>[30650.434285] Suspending console(s) (use no_console_suspend to debug)
>[30650.563883] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[30650.565071] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[30650.646522] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[30650.646760] sd 0:0:0:0: [sda] Stopping disk
>[30651.530553] PM: suspend of devices complete after 1085.162 msecs
>[30651.530809] PM: late suspend of devices complete after 0.251 msecs
>[30651.586233] PM: noirq suspend of devices complete after 55.421 msecs
>[30651.586518] ACPI: Preparing to enter system sleep state S3
>[30651.588129] PM: Saving platform NVS memory
>[30651.588227] Disabling non-boot CPUs ...
>[30651.589687] smpboot: CPU 1 is now offline
>[30651.590809] CPU 1 offline: Remove Rx thread
>[30651.590968] Extended CMOS year: 2000
>[30651.590968] ACPI: Low-level resume complete
>[30651.590968] PM: Restoring platform NVS memory
>[30651.590968] Extended CMOS year: 2000
>[30651.590968] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[30651.591329] Enabling non-boot CPUs ...
>[30651.591436] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[30651.589529] Initializing CPU#1
>[30651.603807] bnx2i: CPU 1 online: Create Rx thread
>[30651.604132] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[30651.604155] CPU1 is up
>[30651.605807] ACPI: Waking up from system sleep state S3
>[30651.698084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[30651.698086] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[30651.720263] PM: noirq resume of devices complete after 110.093 msecs
>[30651.720443] PM: early resume of devices complete after 0.101 msecs
>[30651.720479] i915 0000:00:02.0: setting latency timer to 64
>[30651.720719] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[30651.720904] usb usb3: root hub lost power or was reset
>[30651.721015] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[30651.721322] usb usb4: root hub lost power or was reset
>[30651.721520] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[30651.723014] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[30651.723941] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[30651.724143] usb usb5: root hub lost power or was reset
>[30651.724235] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[30651.724549] usb usb6: root hub lost power or was reset
>[30651.724735] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[30651.724970] usb usb7: root hub lost power or was reset
>[30651.725218] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[30651.725345] pci 0000:00:1e.0: setting latency timer to 64
>[30651.725623] ata_piix 0000:00:1f.1: setting latency timer to 64
>[30651.725855] ahci 0000:00:1f.2: setting latency timer to 64
>[30651.726569] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30651.727586] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30651.797977] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[30651.815266] r8169 0000:08:00.0: p3p1: link down
>[30652.000539] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[30652.000543] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[30652.023334] ata4.00: configured for MWDMA2
>[30652.033071] ata2: SATA link down (SStatus 0 SControl 300)
>[30652.033101] ata3: SATA link down (SStatus 0 SControl 300)
>[30652.282093] firewire_core 0000:09:09.0: rediscovered device fw0
>[30653.869095] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[30653.870000] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[30653.931497] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[30653.931502] ata1.00: configured for UDMA/100
>[30654.020136] sd 0:0:0:0: [sda] Starting disk
>[30654.046622] PM: resume of devices complete after 2326.174 msecs
>[30654.046873] PM: Finishing wakeup.
>[30654.046875] Restarting tasks ... done.
>[30654.067327] video LNXVIDEO:01: Restoring backlight state
>[30654.127096] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30654.186074] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30654.243339] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30654.300427] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30670.275822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30670.499050] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30670.571447] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30670.754242] r8169 0000:08:00.0: p3p1: link down
>[30670.754300] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[30672.323804] cfg80211: World regulatory domain updated:
>[30672.323811] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[30672.323814] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30672.323817] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[30672.323820] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[30672.323823] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30672.323826] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30672.324352] cfg80211: Calling CRDA for country: PT
>[30672.738200] cfg80211: Regulatory domain changed to country: PT
>[30672.738204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[30672.738207] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30672.738210] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30672.738213] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30672.738216] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[30676.377760] wlan0: authenticate with 00:26:5b:09:2d:a8
>[30676.377877] wlan0: send auth to 00:26:5b:09:2d:a8 (try 1/3)
>[30676.379501] wlan0: authenticated
>[30676.380059] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[30676.381031] wlan0: associate with 00:26:5b:09:2d:a8 (try 1/3)
>[30676.382769] wlan0: RX AssocResp from 00:26:5b:09:2d:a8 (capab=0xc31 status=0 aid=1)
>[30676.384023] wlan0: associated
>[30676.384056] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[30926.042668] wlan0: deauthenticating from 00:26:5b:09:2d:a8 by local choice (reason=3)
>[30926.062937] cfg80211: Calling CRDA to update world regulatory domain
>[30934.223858] PM: Syncing filesystems ... done.
>[30934.658981] PM: Preparing system for mem sleep
>[30934.738376] Freezing user space processes ... (elapsed 0.09 seconds) done.
>[30934.838233] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[30934.849214] PM: Entering mem sleep
>[30934.849247] Suspending console(s) (use no_console_suspend to debug)
>[30934.861562] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[30934.862488] sd 0:0:0:0: [sda] Stopping disk
>[30934.979844] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[30934.980754] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[30935.776533] PM: suspend of devices complete after 916.126 msecs
>[30935.776780] PM: late suspend of devices complete after 0.242 msecs
>[30935.832230] PM: noirq suspend of devices complete after 55.448 msecs
>[30935.832513] ACPI: Preparing to enter system sleep state S3
>[30935.834128] PM: Saving platform NVS memory
>[30935.834223] Disabling non-boot CPUs ...
>[30935.835668] smpboot: CPU 1 is now offline
>[30935.837404] CPU 1 offline: Remove Rx thread
>[30935.837539] Extended CMOS year: 2000
>[30935.837539] ACPI: Low-level resume complete
>[30935.837539] PM: Restoring platform NVS memory
>[30935.837539] Extended CMOS year: 2000
>[30935.837539] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[30935.837539] Enabling non-boot CPUs ...
>[30935.837539] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[30935.835511] Initializing CPU#1
>[30935.850366] bnx2i: CPU 1 online: Create Rx thread
>[30935.850690] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[30935.851040] CPU1 is up
>[30935.852660] ACPI: Waking up from system sleep state S3
>[30935.944084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[30935.944087] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[30935.966267] PM: noirq resume of devices complete after 110.097 msecs
>[30935.966446] PM: early resume of devices complete after 0.100 msecs
>[30935.966483] i915 0000:00:02.0: setting latency timer to 64
>[30935.966668] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[30935.966815] usb usb3: root hub lost power or was reset
>[30935.967016] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[30935.967236] usb usb4: root hub lost power or was reset
>[30935.967421] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[30935.968869] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[30935.969582] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[30935.969766] usb usb5: root hub lost power or was reset
>[30935.970015] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[30935.970273] usb usb6: root hub lost power or was reset
>[30935.970560] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[30935.970782] usb usb7: root hub lost power or was reset
>[30935.971117] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[30935.971347] pci 0000:00:1e.0: setting latency timer to 64
>[30935.971495] ata_piix 0000:00:1f.1: setting latency timer to 64
>[30935.971722] ahci 0000:00:1f.2: setting latency timer to 64
>[30935.972487] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30935.973501] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30936.042581] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[30936.072262] r8169 0000:08:00.0: p3p1: link down
>[30936.246479] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[30936.246482] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[30936.268335] ata4.00: configured for MWDMA2
>[30936.278086] ata3: SATA link down (SStatus 0 SControl 300)
>[30936.281091] ata2: SATA link down (SStatus 0 SControl 300)
>[30936.527089] firewire_core 0000:09:09.0: rediscovered device fw0
>[30938.165097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[30938.166044] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[30938.167175] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[30938.167180] ata1.00: configured for UDMA/100
>[30938.178136] sd 0:0:0:0: [sda] Starting disk
>[30938.276729] PM: resume of devices complete after 2310.277 msecs
>[30938.276992] PM: Finishing wakeup.
>[30938.276994] Restarting tasks ... done.
>[30938.337904] video LNXVIDEO:01: Restoring backlight state
>[30938.395171] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30938.454542] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30938.513678] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30938.572518] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[30946.679141] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30946.918428] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30946.988344] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[30947.199252] r8169 0000:08:00.0: p3p1: link down
>[30947.199325] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[30948.649582] cfg80211: World regulatory domain updated:
>[30948.649588] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[30948.649592] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30948.649595] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[30948.649598] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[30948.649601] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30948.649604] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[30948.649620] cfg80211: Calling CRDA for country: PT
>[30948.964765] cfg80211: Regulatory domain changed to country: PT
>[30948.964770] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[30948.964773] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30948.964776] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30948.964779] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[30948.964782] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[30953.320658] wlan0: authenticate with 00:26:5b:09:2d:a8
>[30953.320790] wlan0: send auth to 00:26:5b:09:2d:a8 (try 1/3)
>[30953.321957] wlan0: authenticated
>[30953.321984] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[30953.323032] wlan0: associate with 00:26:5b:09:2d:a8 (try 1/3)
>[30953.324693] wlan0: RX AssocResp from 00:26:5b:09:2d:a8 (capab=0xc31 status=0 aid=1)
>[30953.325826] wlan0: associated
>[30953.325859] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[32809.461080] usb 2-2: new high-speed USB device number 2 using ehci_hcd
>[32809.575897] usb 2-2: New USB device found, idVendor=19d2, idProduct=1001
>[32809.575903] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>[32809.575907] usb 2-2: Product: K3805-z
>[32809.575911] usb 2-2: Manufacturer: Vodafone
>[32809.575914] usb 2-2: SerialNumber: D638D65D78CA7B9DE7AD385470EC33F7EB3A4E46
>[32819.568742] Initializing USB Mass Storage driver...
>[32819.569931] scsi5 : usb-storage 2-2:1.0
>[32819.570160] usbcore: registered new interface driver usb-storage
>[32819.570163] USB Mass Storage support registered.
>[32820.573237] scsi 5:0:0:0: CD-ROM            Vodafone USB SCSI CD-ROM  0001 PQ: 0 ANSI: 0
>[32820.573852] scsi 5:0:0:1: Direct-Access     Vodafone Storage          0001 PQ: 0 ANSI: 0
>[32820.577830] sr1: scsi3-mmc drive: 0x/0x caddy
>[32820.578488] sr 5:0:0:0: Attached scsi CD-ROM sr1
>[32820.578813] sr 5:0:0:0: Attached scsi generic sg2 type 5
>[32820.582466] sd 5:0:0:1: Attached scsi generic sg3 type 0
>[32820.584329] sd 5:0:0:1: [sdb] Attached SCSI removable disk
>[32820.633970] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
>[32820.633994] sr: Sense Key : Hardware Error [current] 
>[32820.634025] sr: Add. Sense: No additional sense information
>[32820.637213] usb 2-2: USB disconnect, device number 2
>[32826.924194] usb 2-2: new high-speed USB device number 3 using ehci_hcd
>[32827.039586] usb 2-2: New USB device found, idVendor=19d2, idProduct=1003
>[32827.039594] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
>[32827.039600] usb 2-2: Product: K3805-z
>[32827.039606] usb 2-2: Manufacturer: Vodafone
>[32827.039610] usb 2-2: SerialNumber: D638D65D78CA7B9DE7AD385470EC33F7EB3A4E46
>[32827.041509] scsi6 : usb-storage 2-2:1.7
>[32827.347431] cdc_acm 2-2:1.1: ttyACM0: USB ACM device
>[32827.348553] cdc_acm 2-2:1.3: ttyACM1: USB ACM device
>[32827.349397] usbcore: registered new interface driver cdc_acm
>[32827.349400] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>[32827.377203] cdc_ether 2-2:1.5: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-2, Mobile Broadband Network Device, 02:ca:7b:9d:e7:ad
>[32827.377464] usbcore: registered new interface driver cdc_ether
>[32828.045695] scsi 6:0:0:0: CD-ROM            Vodafone USB SCSI CD-ROM  0001 PQ: 0 ANSI: 0
>[32828.046187] scsi 6:0:0:1: Direct-Access     Vodafone Storage          0001 PQ: 0 ANSI: 0
>[32828.049181] sr1: scsi3-mmc drive: 0x/0x caddy
>[32828.049656] sr 6:0:0:0: Attached scsi CD-ROM sr1
>[32828.049968] sr 6:0:0:0: Attached scsi generic sg2 type 5
>[32828.050462] sd 6:0:0:1: Attached scsi generic sg3 type 0
>[32828.052432] sd 6:0:0:1: [sdb] Attached SCSI removable disk
>[32828.123932] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
>[32828.123948] sr: Sense Key : Hardware Error [current] 
>[32828.123953] sr: Add. Sense: No additional sense information
>[32861.987067] usb 2-2: USB disconnect, device number 3
>[32861.990994] cdc_ether 2-2:1.5: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-2, Mobile Broadband Network Device
>[32862.002117] cdrom: issuing MRW background format suspend
>[33013.961470] EXT4-fs (sda6): re-mounted. Opts: barrier=0,commit=60
>[33016.592313] EXT4-fs (sda8): re-mounted. Opts: barrier=0,commit=60
>[33016.768391] EXT4-fs (sda5): re-mounted. Opts: barrier=0,commit=60
>[34622.915882] wlan0: deauthenticating from 00:26:5b:09:2d:a8 by local choice (reason=3)
>[34622.933130] cfg80211: Calling CRDA to update world regulatory domain
>[34632.847449] cfg80211: World regulatory domain updated:
>[34632.847454] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34632.847457] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34632.847461] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34632.847464] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34632.847467] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34632.847469] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34632.847484] cfg80211: Calling CRDA for country: PT
>[34632.851053] cfg80211: Regulatory domain changed to country: PT
>[34632.851058] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34632.851061] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34632.851064] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34632.851067] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34632.851069] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[34633.779773] PM: Syncing filesystems ... done.
>[34633.783079] PM: Preparing system for mem sleep
>[34633.978203] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[34634.012240] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[34634.023216] PM: Entering mem sleep
>[34634.023255] Suspending console(s) (use no_console_suspend to debug)
>[34634.056787] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[34634.176293] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[34634.177216] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[34634.566350] sd 0:0:0:0: [sda] Stopping disk
>[34635.511536] PM: suspend of devices complete after 1455.036 msecs
>[34635.511788] PM: late suspend of devices complete after 0.247 msecs
>[34635.567229] PM: noirq suspend of devices complete after 55.437 msecs
>[34635.567515] ACPI: Preparing to enter system sleep state S3
>[34635.569125] PM: Saving platform NVS memory
>[34635.569218] Disabling non-boot CPUs ...
>[34635.570667] smpboot: CPU 1 is now offline
>[34635.571657] CPU 1 offline: Remove Rx thread
>[34635.571657] Extended CMOS year: 2000
>[34635.571657] ACPI: Low-level resume complete
>[34635.571657] PM: Restoring platform NVS memory
>[34635.571657] Extended CMOS year: 2000
>[34635.571657] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[34635.572268] Enabling non-boot CPUs ...
>[34635.572378] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[34635.570510] Initializing CPU#1
>[34635.584758] bnx2i: CPU 1 online: Create Rx thread
>[34635.585083] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[34635.585106] CPU1 is up
>[34635.586763] ACPI: Waking up from system sleep state S3
>[34635.679083] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[34635.679086] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[34635.701266] PM: noirq resume of devices complete after 110.096 msecs
>[34635.701446] PM: early resume of devices complete after 0.101 msecs
>[34635.701483] i915 0000:00:02.0: setting latency timer to 64
>[34635.701676] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[34635.701815] usb usb3: root hub lost power or was reset
>[34635.702015] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[34635.702242] usb usb4: root hub lost power or was reset
>[34635.702432] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[34635.704067] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[34635.705325] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[34635.705692] usb usb5: root hub lost power or was reset
>[34635.705978] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[34635.706008] usb usb6: root hub lost power or was reset
>[34635.706300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[34635.706716] usb usb7: root hub lost power or was reset
>[34635.706994] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[34635.707142] pci 0000:00:1e.0: setting latency timer to 64
>[34635.707373] ata_piix 0000:00:1f.1: setting latency timer to 64
>[34635.707477] ahci 0000:00:1f.2: setting latency timer to 64
>[34635.707917] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34635.708932] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34635.778217] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[34635.982493] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[34635.982497] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[34636.004371] ata4.00: configured for MWDMA2
>[34636.015102] ata3: SATA link down (SStatus 0 SControl 300)
>[34636.015131] ata2: SATA link down (SStatus 0 SControl 300)
>[34636.261530] firewire_core 0000:09:09.0: rediscovered device fw0
>[34637.799497] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[34637.800445] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[34637.801566] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[34637.801571] ata1.00: configured for UDMA/100
>[34637.812571] sd 0:0:0:0: [sda] Starting disk
>[34637.829735] PM: resume of devices complete after 2128.284 msecs
>[34637.841365] PM: Finishing wakeup.
>[34637.841368] Restarting tasks ... done.
>[34637.861973] video LNXVIDEO:01: Restoring backlight state
>[34637.921055] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34637.945056] usb 4-2: new low-speed USB device number 3 using uhci_hcd
>[34637.980147] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34638.039082] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34638.105787] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[34638.113641] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[34638.113646] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[34638.113650] usb 4-2: Product: Comfort Optical Mouse 1000
>[34638.113654] usb 4-2: Manufacturer: Microsoft
>[34638.132663] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input20
>[34638.133318] hid-generic 0003:045E:00F6.0008: input,hidraw3: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[34638.133425] usb 1-4: USB disconnect, device number 5
>[34638.133430] usb 1-4.2: USB disconnect, device number 6
>[34638.146360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[34638.153595] usb 1-4.4: USB disconnect, device number 7
>[34638.174213] r8169 0000:08:00.0: p3p1: link down
>[34638.174356] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[34638.687348] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[34638.759426] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[34645.055461] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[34645.057642] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[34645.059086] wlan0: authenticated
>[34645.059127] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[34645.060056] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[34645.062180] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=3)
>[34645.063541] wlan0: associated
>[34645.063574] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[34712.193432] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[34712.206743] cfg80211: Calling CRDA to update world regulatory domain
>[34712.213381] wlan0: authenticate with 00:1f:ca:46:44:30
>[34712.214878] wlan0: send auth to 00:1f:ca:46:44:30 (try 1/3)
>[34712.215492] wlan0: authenticated
>[34712.215519] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[34712.216022] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[34712.217223] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[34712.218403] wlan0: associated
>[34712.390198] cfg80211: World regulatory domain updated:
>[34712.390204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34712.390207] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34712.390210] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34712.390213] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34712.390216] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34712.390219] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34712.390231] cfg80211: Calling CRDA for country: PT
>[34712.393625] cfg80211: Regulatory domain changed to country: PT
>[34712.393629] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34712.393633] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34712.393635] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34712.393638] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34712.393641] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[34727.249697] wlan0: deauthenticating from 00:1f:ca:46:44:30 by local choice (reason=3)
>[34727.260280] cfg80211: Calling CRDA to update world regulatory domain
>[34727.639583] cfg80211: World regulatory domain updated:
>[34727.639588] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34727.639592] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34727.639595] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34727.639598] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[34727.639601] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34727.639604] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[34727.639625] cfg80211: Calling CRDA for country: PT
>[34727.654197] cfg80211: Regulatory domain changed to country: PT
>[34727.654202] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[34727.654205] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34727.654208] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34727.654211] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[34727.654213] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[34732.696123] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[34732.697788] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[34732.700493] wlan0: authenticated
>[34732.700529] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[34732.702043] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[34732.705187] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=3)
>[34732.707407] wlan0: associated
>[37743.388452] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[37743.397041] cfg80211: Calling CRDA to update world regulatory domain
>[37743.401178] wlan0: authenticate with 00:1f:ca:46:44:30
>[37743.402691] wlan0: send auth to 00:1f:ca:46:44:30 (try 1/3)
>[37743.403291] wlan0: authenticated
>[37743.403327] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[37743.404025] wlan0: associate with 00:1f:ca:46:44:30 (try 1/3)
>[37743.405229] wlan0: RX AssocResp from 00:1f:ca:46:44:30 (capab=0x111 status=0 aid=1)
>[37743.406519] wlan0: associated
>[37743.556422] cfg80211: World regulatory domain updated:
>[37743.556428] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[37743.556432] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37743.556435] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[37743.556439] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[37743.556442] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37743.556445] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37743.556515] cfg80211: Calling CRDA for country: PT
>[37743.559665] cfg80211: Regulatory domain changed to country: PT
>[37743.559670] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[37743.559673] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37743.559676] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37743.559679] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37743.559681] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[37749.513203] ieee80211 phy0: wlan0: No probe response from AP 00:1f:ca:46:44:30 after 500ms, disconnecting.
>[37749.515902] cfg80211: Calling CRDA to update world regulatory domain
>[37749.664920] cfg80211: World regulatory domain updated:
>[37749.664925] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[37749.664929] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37749.664932] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[37749.664935] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[37749.664938] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37749.664941] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[37749.664957] cfg80211: Calling CRDA for country: PT
>[37749.669119] cfg80211: Regulatory domain changed to country: PT
>[37749.669124] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[37749.669127] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37749.669130] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37749.669133] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[37749.669135] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[37752.105454] wlan0: authenticate with 00:1f:ca:2d:02:e0
>[37752.110840] wlan0: send auth to 00:1f:ca:2d:02:e0 (try 1/3)
>[37752.112235] wlan0: authenticated
>[37752.112262] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[37752.113029] wlan0: associate with 00:1f:ca:2d:02:e0 (try 1/3)
>[37752.116049] wlan0: RX AssocResp from 00:1f:ca:2d:02:e0 (capab=0x431 status=0 aid=3)
>[37752.117932] wlan0: associated
>[42791.669080] wlan0: deauthenticating from 00:1f:ca:2d:02:e0 by local choice (reason=3)
>[42791.686138] cfg80211: Calling CRDA to update world regulatory domain
>[42797.800047] cfg80211: World regulatory domain updated:
>[42797.800052] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42797.800056] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42797.800059] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42797.800062] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[42797.800065] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42797.800068] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[42797.800081] cfg80211: Calling CRDA for country: PT
>[42798.102432] cfg80211: Regulatory domain changed to country: PT
>[42798.102436] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[42798.102440] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[42798.102442] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[42798.102445] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[42798.102448] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[42799.112168] PM: Syncing filesystems ... done.
>[42799.116818] PM: Preparing system for mem sleep
>[42800.511203] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[42800.523694] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[42800.534630] PM: Entering mem sleep
>[42800.534664] Suspending console(s) (use no_console_suspend to debug)
>[42800.568118] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[42800.568474] sd 0:0:0:0: [sda] Stopping disk
>[42800.688231] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[42800.689150] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[42801.512557] PM: suspend of devices complete after 944.600 msecs
>[42801.512803] PM: late suspend of devices complete after 0.241 msecs
>[42801.568225] PM: noirq suspend of devices complete after 55.420 msecs
>[42801.568510] ACPI: Preparing to enter system sleep state S3
>[42801.570124] PM: Saving platform NVS memory
>[42801.570222] Disabling non-boot CPUs ...
>[42801.571685] smpboot: CPU 1 is now offline
>[42801.572295] CPU 1 offline: Remove Rx thread
>[42801.572429] Extended CMOS year: 2000
>[42801.572429] ACPI: Low-level resume complete
>[42801.572429] PM: Restoring platform NVS memory
>[42801.572429] Extended CMOS year: 2000
>[42801.572429] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[42801.572429] Enabling non-boot CPUs ...
>[42801.572429] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[42801.571528] Initializing CPU#1
>[42801.585261] bnx2i: CPU 1 online: Create Rx thread
>[42801.585585] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[42801.586041] CPU1 is up
>[42801.587662] ACPI: Waking up from system sleep state S3
>[42801.679083] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[42801.679085] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[42801.701260] PM: noirq resume of devices complete after 110.091 msecs
>[42801.701437] PM: early resume of devices complete after 0.098 msecs
>[42801.701473] i915 0000:00:02.0: setting latency timer to 64
>[42801.701752] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[42801.702005] usb usb3: root hub lost power or was reset
>[42801.702180] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[42801.702596] usb usb4: root hub lost power or was reset
>[42801.702976] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[42801.704609] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[42801.705446] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[42801.705681] usb usb5: root hub lost power or was reset
>[42801.705820] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[42801.706008] usb usb6: root hub lost power or was reset
>[42801.706290] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[42801.706798] usb usb7: root hub lost power or was reset
>[42801.707049] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[42801.707177] pci 0000:00:1e.0: setting latency timer to 64
>[42801.707409] ata_piix 0000:00:1f.1: setting latency timer to 64
>[42801.707466] ahci 0000:00:1f.2: setting latency timer to 64
>[42801.707906] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42801.708921] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42801.780202] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[42801.982593] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[42801.982596] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[42802.004471] ata4.00: configured for MWDMA2
>[42802.015217] ata3: SATA link down (SStatus 0 SControl 300)
>[42802.015247] ata2: SATA link down (SStatus 0 SControl 300)
>[42802.177195] usb 4-2: reset low-speed USB device number 3 using uhci_hcd
>[42802.261211] firewire_core 0000:09:09.0: rediscovered device fw0
>[42803.901182] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[42803.902129] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[42803.903234] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[42803.903239] ata1.00: configured for UDMA/100
>[42803.914221] sd 0:0:0:0: [sda] Starting disk
>[42803.936549] PM: resume of devices complete after 2235.106 msecs
>[42803.947340] PM: Finishing wakeup.
>[42803.947343] Restarting tasks ... done.
>[42803.972537] video LNXVIDEO:01: Restoring backlight state
>[42804.030132] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42804.089275] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42804.148023] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42804.208029] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[42804.379471] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42804.448769] r8169 0000:08:00.0: p3p1: link down
>[42804.448967] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[42804.531484] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42804.607430] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[42809.993867] wlan0: authenticate with 00:0e:84:af:9e:00
>[42809.995687] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[42809.999647] wlan0: authenticated
>[42809.999689] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[42810.001030] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[42810.003203] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=218)
>[42810.004688] wlan0: associated
>[42810.004723] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[44249.250220] usb 4-2: USB disconnect, device number 3
>[44251.484145] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[44251.507054] cfg80211: Calling CRDA to update world regulatory domain
>[44251.566074] cfg80211: World regulatory domain updated:
>[44251.566079] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44251.566083] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44251.566086] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44251.566090] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44251.566092] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44251.566095] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44251.566112] cfg80211: Calling CRDA for country: PT
>[44251.578337] cfg80211: Regulatory domain changed to country: PT
>[44251.578342] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44251.578345] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44251.578348] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44251.578351] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44251.578354] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[44254.389881] PM: Syncing filesystems ... done.
>[44254.394595] PM: Preparing system for mem sleep
>[44254.480916] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[44254.492690] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[44254.503641] PM: Entering mem sleep
>[44254.503675] Suspending console(s) (use no_console_suspend to debug)
>[44254.537100] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[44254.655747] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[44254.656683] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[44254.994940] sd 0:0:0:0: [sda] Stopping disk
>[44255.908533] PM: suspend of devices complete after 1371.587 msecs
>[44255.908781] PM: late suspend of devices complete after 0.243 msecs
>[44255.963226] PM: noirq suspend of devices complete after 54.441 msecs
>[44255.963511] ACPI: Preparing to enter system sleep state S3
>[44255.965124] PM: Saving platform NVS memory
>[44255.965222] Disabling non-boot CPUs ...
>[44255.966683] smpboot: CPU 1 is now offline
>[44255.967718] CPU 1 offline: Remove Rx thread
>[44255.967854] Extended CMOS year: 2000
>[44255.967854] ACPI: Low-level resume complete
>[44255.967854] PM: Restoring platform NVS memory
>[44255.967854] Extended CMOS year: 2000
>[44255.967854] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[44255.968217] Enabling non-boot CPUs ...
>[44255.968327] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[44255.966527] Initializing CPU#1
>[44255.980693] bnx2i: CPU 1 online: Create Rx thread
>[44255.981017] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[44255.981041] CPU1 is up
>[44255.982703] ACPI: Waking up from system sleep state S3
>[44256.075082] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[44256.075084] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[44256.097255] PM: noirq resume of devices complete after 110.086 msecs
>[44256.097394] PM: early resume of devices complete after 0.096 msecs
>[44256.097440] i915 0000:00:02.0: setting latency timer to 64
>[44256.097629] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[44256.097709] usb usb3: root hub lost power or was reset
>[44256.097766] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[44256.097891] usb usb4: root hub lost power or was reset
>[44256.098018] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[44256.099538] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[44256.100526] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[44256.100751] usb usb5: root hub lost power or was reset
>[44256.101086] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[44256.101409] usb usb6: root hub lost power or was reset
>[44256.101557] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[44256.101871] usb usb7: root hub lost power or was reset
>[44256.102026] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[44256.102158] pci 0000:00:1e.0: setting latency timer to 64
>[44256.102260] ata_piix 0000:00:1f.1: setting latency timer to 64
>[44256.102538] ahci 0000:00:1f.2: setting latency timer to 64
>[44256.103313] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44256.104373] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44256.177751] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[44256.377932] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[44256.377936] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[44256.400808] ata4.00: configured for MWDMA2
>[44256.409523] ata2: SATA link down (SStatus 0 SControl 300)
>[44256.411522] ata3: SATA link down (SStatus 0 SControl 300)
>[44256.720528] firewire_core 0000:09:09.0: rediscovered device fw0
>[44258.248533] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[44258.249423] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[44258.306248] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[44258.306253] ata1.00: configured for UDMA/100
>[44258.396714] sd 0:0:0:0: [sda] Starting disk
>[44258.422152] PM: resume of devices complete after 2324.752 msecs
>[44258.433216] PM: Finishing wakeup.
>[44258.433219] Restarting tasks ... done.
>[44258.457306] video LNXVIDEO:01: Restoring backlight state
>[44258.515100] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44258.574094] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44258.634097] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44258.693082] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[44258.797053] usb 4-2: new low-speed USB device number 4 using uhci_hcd
>[44258.936903] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[44258.972059] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[44258.972066] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[44258.972070] usb 4-2: Product: Comfort Optical Mouse 1000
>[44258.972074] usb 4-2: Manufacturer: Microsoft
>[44258.991101] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input21
>[44258.991755] hid-generic 0003:045E:00F6.0009: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[44259.024881] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[44259.110099] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[44259.136227] r8169 0000:08:00.0: p3p1: link down
>[44259.137184] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[44264.377953] wlan0: authenticate with 20:37:06:48:e7:60
>[44264.383771] wlan0: send auth to 20:37:06:48:e7:60 (try 1/3)
>[44264.384337] wlan0: authenticated
>[44264.384364] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[44264.385025] wlan0: associate with 20:37:06:48:e7:60 (try 1/3)
>[44264.386218] wlan0: RX AssocResp from 20:37:06:48:e7:60 (capab=0x111 status=0 aid=1)
>[44264.388649] wlan0: associated
>[44264.388688] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[44287.007673] wlan0: deauthenticating from 20:37:06:48:e7:60 by local choice (reason=3)
>[44287.013930] cfg80211: Calling CRDA to update world regulatory domain
>[44287.244192] cfg80211: World regulatory domain updated:
>[44287.244198] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44287.244201] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44287.244205] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44287.244208] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44287.244210] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44287.244213] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44287.244230] cfg80211: Calling CRDA for country: PT
>[44287.248175] cfg80211: Regulatory domain changed to country: PT
>[44287.248179] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44287.248183] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44287.248186] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44287.248188] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44287.248191] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[44291.323507] wlan0: authenticate with 00:0e:84:af:9e:00
>[44291.325771] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[44291.328224] wlan0: authenticated
>[44291.328258] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[44291.331047] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[44291.333696] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=138)
>[44291.335456] wlan0: associated
>[44567.960758] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[44567.970049] cfg80211: Calling CRDA to update world regulatory domain
>[44567.972332] wlan0: authenticate with 20:37:06:48:e7:60
>[44567.977478] wlan0: send auth to 20:37:06:48:e7:60 (try 1/3)
>[44567.978248] wlan0: authenticated
>[44567.978339] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[44567.979028] wlan0: associate with 20:37:06:48:e7:60 (try 1/3)
>[44567.980229] wlan0: RX AssocResp from 20:37:06:48:e7:60 (capab=0x111 status=0 aid=1)
>[44567.981771] wlan0: associated
>[44569.002674] cfg80211: World regulatory domain updated:
>[44569.002679] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44569.002683] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44569.002686] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44569.002689] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44569.002692] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44569.002695] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44569.002706] cfg80211: Calling CRDA for country: PT
>[44569.005950] cfg80211: Regulatory domain changed to country: PT
>[44569.005954] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44569.005957] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44569.005960] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44569.005963] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44569.005965] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[44598.697849] wlan0: deauthenticated from 20:37:06:48:e7:60 (Reason: 23)
>[44598.701339] cfg80211: Calling CRDA to update world regulatory domain
>[44599.655747] cfg80211: World regulatory domain updated:
>[44599.655752] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44599.655755] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44599.655758] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44599.655761] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[44599.655764] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44599.655767] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[44599.655785] cfg80211: Calling CRDA for country: PT
>[44599.659038] cfg80211: Regulatory domain changed to country: PT
>[44599.659042] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[44599.659045] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44599.659048] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44599.659050] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[44599.659053] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[44601.298322] wlan0: authenticate with 00:0e:84:af:9e:00
>[44601.299991] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[44601.302576] wlan0: authenticated
>[44601.302612] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[44601.304032] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[44601.306025] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=149)
>[44601.308848] wlan0: associated
>[54326.750101] usb 4-2: USB disconnect, device number 4
>[54330.722271] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[54330.741223] cfg80211: Calling CRDA to update world regulatory domain
>[54335.813354] cfg80211: World regulatory domain updated:
>[54335.813360] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[54335.813363] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[54335.813367] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[54335.813370] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[54335.813373] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[54335.813375] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[54335.813388] cfg80211: Calling CRDA for country: PT
>[54335.817189] cfg80211: Regulatory domain changed to country: PT
>[54335.817193] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[54335.817196] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[54335.817199] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[54335.817202] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[54335.817204] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[54337.651093] PM: Syncing filesystems ... done.
>[54337.655813] PM: Preparing system for mem sleep
>[54340.810197] Freezing user space processes ... (elapsed 0.13 seconds) done.
>[54340.943653] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[54340.954635] PM: Entering mem sleep
>[54340.954667] Suspending console(s) (use no_console_suspend to debug)
>[54340.988087] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[54341.108628] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[54341.109546] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[54341.545526] sd 0:0:0:0: [sda] Stopping disk
>[54342.465552] PM: suspend of devices complete after 1477.615 msecs
>[54342.465796] PM: late suspend of devices complete after 0.239 msecs
>[54342.521230] PM: noirq suspend of devices complete after 55.433 msecs
>[54342.521516] ACPI: Preparing to enter system sleep state S3
>[54342.523130] PM: Saving platform NVS memory
>[54342.523228] Disabling non-boot CPUs ...
>[54342.524690] smpboot: CPU 1 is now offline
>[54342.525813] CPU 1 offline: Remove Rx thread
>[54342.525975] Extended CMOS year: 2000
>[54342.525975] ACPI: Low-level resume complete
>[54342.525975] PM: Restoring platform NVS memory
>[54342.525975] Extended CMOS year: 2000
>[54342.525975] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[54342.526335] Enabling non-boot CPUs ...
>[54342.526442] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[54342.524534] Initializing CPU#1
>[54342.538814] bnx2i: CPU 1 online: Create Rx thread
>[54342.539139] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[54342.539163] CPU1 is up
>[54342.540827] ACPI: Waking up from system sleep state S3
>[54342.633082] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[54342.633085] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[54342.655255] PM: noirq resume of devices complete after 110.085 msecs
>[54342.655430] PM: early resume of devices complete after 0.096 msecs
>[54342.655466] i915 0000:00:02.0: setting latency timer to 64
>[54342.655652] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[54342.655929] usb usb3: root hub lost power or was reset
>[54342.656083] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[54342.656276] usb usb4: root hub lost power or was reset
>[54342.656730] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[54342.658095] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[54342.659394] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[54342.659583] usb usb5: root hub lost power or was reset
>[54342.659722] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[54342.659953] usb usb6: root hub lost power or was reset
>[54342.660057] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[54342.660287] usb usb7: root hub lost power or was reset
>[54342.660519] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[54342.660887] pci 0000:00:1e.0: setting latency timer to 64
>[54342.661092] ata_piix 0000:00:1f.1: setting latency timer to 64
>[54342.661458] ahci 0000:00:1f.2: setting latency timer to 64
>[54342.661899] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54342.662914] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54342.738226] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[54342.936510] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[54342.936513] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[54342.958377] ata4.00: configured for MWDMA2
>[54342.969095] ata3: SATA link down (SStatus 0 SControl 300)
>[54342.971129] ata2: SATA link down (SStatus 0 SControl 300)
>[54343.215083] firewire_core 0000:09:09.0: rediscovered device fw0
>[54344.804530] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[54344.805422] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[54344.806549] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[54344.806554] ata1.00: configured for UDMA/100
>[54344.817568] sd 0:0:0:0: [sda] Starting disk
>[54344.834533] PM: resume of devices complete after 2179.098 msecs
>[54344.845685] PM: Finishing wakeup.
>[54344.845688] Restarting tasks ... done.
>[54344.882210] video LNXVIDEO:01: Restoring backlight state
>[54344.941802] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54344.998392] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54345.055416] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54345.112384] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[54345.209030] usb 4-2: new low-speed USB device number 5 using uhci_hcd
>[54345.375078] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[54345.375086] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[54345.375092] usb 4-2: Product: Comfort Optical Mouse 1000
>[54345.375098] usb 4-2: Manufacturer: Microsoft
>[54345.394852] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input22
>[54345.395793] hid-generic 0003:045E:00F6.000A: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[54347.438175] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[54347.932222] r8169 0000:08:00.0: p3p1: link down
>[54347.932632] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[54348.010152] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[54348.084224] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[54353.571770] wlan0: authenticate with 00:0e:84:af:9e:00
>[54353.571947] wlan0: send auth to 00:0e:84:af:9e:00 (try 1/3)
>[54353.573463] wlan0: authenticated
>[54353.573497] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[54353.577175] wlan0: associate with 00:0e:84:af:9e:00 (try 1/3)
>[54353.579914] wlan0: RX AssocResp from 00:0e:84:af:9e:00 (capab=0x431 status=0 aid=107)
>[54353.581679] wlan0: associated
>[54353.581719] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[57563.296076] wlan0: deauthenticating from 00:0e:84:af:9e:00 by local choice (reason=3)
>[57563.321383] cfg80211: Calling CRDA to update world regulatory domain
>[57569.500110] usb 4-2: USB disconnect, device number 5
>[57575.696553] PM: Syncing filesystems ... done.
>[57576.022059] PM: Preparing system for mem sleep
>[57576.604199] Freezing user space processes ... (elapsed 0.03 seconds) done.
>[57576.638655] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[57576.649637] PM: Entering mem sleep
>[57576.649668] Suspending console(s) (use no_console_suspend to debug)
>[57576.660966] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[57576.778986] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[57576.779842] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[57577.177785] sd 0:0:0:0: [sda] Stopping disk
>[57578.128557] PM: suspend of devices complete after 1467.726 msecs
>[57578.128804] PM: late suspend of devices complete after 0.241 msecs
>[57578.184235] PM: noirq suspend of devices complete after 55.426 msecs
>[57578.184518] ACPI: Preparing to enter system sleep state S3
>[57578.186124] PM: Saving platform NVS memory
>[57578.186220] Disabling non-boot CPUs ...
>[57578.187680] smpboot: CPU 1 is now offline
>[57578.188234] CPU 1 offline: Remove Rx thread
>[57578.188370] Extended CMOS year: 2000
>[57578.188370] ACPI: Low-level resume complete
>[57578.188370] PM: Restoring platform NVS memory
>[57578.188370] Extended CMOS year: 2000
>[57578.188370] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[57578.188370] Enabling non-boot CPUs ...
>[57578.188370] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[57578.187523] Initializing CPU#1
>[57578.201201] bnx2i: CPU 1 online: Create Rx thread
>[57578.201526] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[57578.202037] CPU1 is up
>[57578.203658] ACPI: Waking up from system sleep state S3
>[57578.295084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[57578.295087] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[57578.317255] PM: noirq resume of devices complete after 110.085 msecs
>[57578.317440] PM: early resume of devices complete after 0.095 msecs
>[57578.317476] i915 0000:00:02.0: setting latency timer to 64
>[57578.317801] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[57578.317902] usb usb3: root hub lost power or was reset
>[57578.318101] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[57578.318369] usb usb4: root hub lost power or was reset
>[57578.318508] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[57578.320104] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[57578.321095] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[57578.321269] usb usb5: root hub lost power or was reset
>[57578.321547] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[57578.322002] usb usb6: root hub lost power or was reset
>[57578.322202] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[57578.322570] usb usb7: root hub lost power or was reset
>[57578.322755] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[57578.322846] pci 0000:00:1e.0: setting latency timer to 64
>[57578.323051] ata_piix 0000:00:1f.1: setting latency timer to 64
>[57578.323463] ahci 0000:00:1f.2: setting latency timer to 64
>[57578.323863] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57578.324878] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57578.441314] r8169 0000:08:00.0: p3p1: link down
>[57578.446273] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[57578.599787] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[57578.599790] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[57578.621658] ata4.00: configured for MWDMA2
>[57578.631373] ata3: SATA link down (SStatus 0 SControl 300)
>[57578.631402] ata2: SATA link down (SStatus 0 SControl 300)
>[57578.878392] firewire_core 0000:09:09.0: rediscovered device fw0
>[57580.466500] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[57580.467325] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[57580.530240] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[57580.530245] ata1.00: configured for UDMA/100
>[57580.616549] sd 0:0:0:0: [sda] Starting disk
>[57580.631352] Extended CMOS year: 2000
>[57580.642646] PM: resume of devices complete after 2325.201 msecs
>[57580.642876] PM: Finishing wakeup.
>[57580.642878] Restarting tasks ... done.
>[57580.648330] video LNXVIDEO:01: Restoring backlight state
>[57580.705619] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57580.762524] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57580.819425] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57580.876863] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[57581.006078] usb 4-2: new low-speed USB device number 6 using uhci_hcd
>[57581.170326] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[57581.170333] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[57581.170338] usb 4-2: Product: Comfort Optical Mouse 1000
>[57581.170341] usb 4-2: Manufacturer: Microsoft
>[57581.189326] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input23
>[57581.190111] hid-generic 0003:045E:00F6.000B: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[57587.559749] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[57587.755031] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[57587.827504] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[57588.145605] r8169 0000:08:00.0: p3p1: link down
>[57588.145917] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[57590.618766] cfg80211: World regulatory domain updated:
>[57590.618772] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[57590.618775] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57590.618778] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[57590.618781] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[57590.618784] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57590.618787] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[57590.619297] cfg80211: Calling CRDA for country: PT
>[57590.622200] cfg80211: Regulatory domain changed to country: PT
>[57590.622204] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[57590.622207] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[57590.622210] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[57590.622212] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[57590.622215] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[57593.970834] wlan0: authenticate with 00:0f:24:d6:c7:a0
>[57593.975431] wlan0: send auth to 00:0f:24:d6:c7:a0 (try 1/3)
>[57593.977700] wlan0: authenticated
>[57593.977742] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[57593.979033] wlan0: associate with 00:0f:24:d6:c7:a0 (try 1/3)
>[57593.983971] wlan0: RX AssocResp from 00:0f:24:d6:c7:a0 (capab=0x431 status=0 aid=57)
>[57593.985765] wlan0: associated
>[57593.985803] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[58021.000092] usb 4-2: USB disconnect, device number 6
>[58023.100396] wlan0: deauthenticating from 00:0f:24:d6:c7:a0 by local choice (reason=3)
>[58023.123314] cfg80211: Calling CRDA to update world regulatory domain
>[58034.859987] PM: Syncing filesystems ... done.
>[58036.300961] PM: Preparing system for mem sleep
>[58036.383193] Freezing user space processes ... (elapsed 0.07 seconds) done.
>[58036.461659] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[58036.472650] PM: Entering mem sleep
>[58036.472684] Suspending console(s) (use no_console_suspend to debug)
>[58036.483976] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[58036.603066] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[58036.603963] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[58036.654664] sd 0:0:0:0: [sda] Stopping disk
>[58037.588586] PM: suspend of devices complete after 1104.749 msecs
>[58037.588815] PM: late suspend of devices complete after 0.225 msecs
>[58037.644235] PM: noirq suspend of devices complete after 55.415 msecs
>[58037.644522] ACPI: Preparing to enter system sleep state S3
>[58037.646129] PM: Saving platform NVS memory
>[58037.646226] Disabling non-boot CPUs ...
>[58037.647608] smpboot: CPU 1 is now offline
>[58037.648140] CPU 1 offline: Remove Rx thread
>[58037.648274] Extended CMOS year: 2000
>[58037.648274] ACPI: Low-level resume complete
>[58037.648274] PM: Restoring platform NVS memory
>[58037.648274] Extended CMOS year: 2000
>[58037.648274] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[58037.648274] Enabling non-boot CPUs ...
>[58037.648274] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[58037.647013] Initializing CPU#1
>[58037.661134] bnx2i: CPU 1 online: Create Rx thread
>[58037.661455] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[58037.662027] CPU1 is up
>[58037.663661] ACPI: Waking up from system sleep state S3
>[58037.755084] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[58037.755086] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[58037.777257] PM: noirq resume of devices complete after 110.084 msecs
>[58037.777433] PM: early resume of devices complete after 0.096 msecs
>[58037.777469] i915 0000:00:02.0: setting latency timer to 64
>[58037.777709] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[58037.777893] usb usb3: root hub lost power or was reset
>[58037.778044] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[58037.778359] usb usb4: root hub lost power or was reset
>[58037.778507] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[58037.779899] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[58037.781088] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[58037.781355] usb usb5: root hub lost power or was reset
>[58037.781679] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[58037.782002] usb usb6: root hub lost power or was reset
>[58037.782203] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[58037.782564] usb usb7: root hub lost power or was reset
>[58037.782795] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[58037.782932] pci 0000:00:1e.0: setting latency timer to 64
>[58037.783044] ata_piix 0000:00:1f.1: setting latency timer to 64
>[58037.783322] ahci 0000:00:1f.2: setting latency timer to 64
>[58037.783881] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58037.784895] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58037.856343] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[58037.891276] r8169 0000:08:00.0: p3p1: link down
>[58038.059516] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[58038.059519] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[58038.081388] ata4.00: configured for MWDMA2
>[58038.089133] ata2: SATA link down (SStatus 0 SControl 300)
>[58038.091101] ata3: SATA link down (SStatus 0 SControl 300)
>[58038.338127] firewire_core 0000:09:09.0: rediscovered device fw0
>[58039.929530] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[58039.930364] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[58039.991791] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[58039.991796] ata1.00: configured for UDMA/100
>[58040.003555] sd 0:0:0:0: [sda] Starting disk
>[58040.108128] PM: resume of devices complete after 2330.689 msecs
>[58040.108372] PM: Finishing wakeup.
>[58040.108374] Restarting tasks ... done.
>[58040.135846] video LNXVIDEO:01: Restoring backlight state
>[58040.192414] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58040.249449] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58040.306557] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58040.363466] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[58040.474059] usb 4-2: new low-speed USB device number 7 using uhci_hcd
>[58040.640085] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[58040.640092] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[58040.640096] usb 4-2: Product: Comfort Optical Mouse 1000
>[58040.640100] usb 4-2: Manufacturer: Microsoft
>[58040.660466] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input24
>[58040.661349] hid-generic 0003:045E:00F6.000C: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[58044.431493] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[58044.644216] r8169 0000:08:00.0: p3p1: link down
>[58044.644378] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[58044.715847] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[58044.793063] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[58047.152997] cfg80211: World regulatory domain updated:
>[58047.153003] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[58047.153006] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[58047.153028] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[58047.153031] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[58047.153034] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[58047.153037] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[58047.153050] cfg80211: Calling CRDA for country: PT
>[58047.156646] cfg80211: Regulatory domain changed to country: PT
>[58047.156651] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[58047.156654] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[58047.156657] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[58047.156660] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[58047.156662] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[58050.309348] wlan0: authenticate with 00:0f:24:d6:c7:a0
>[58050.309545] wlan0: send auth to 00:0f:24:d6:c7:a0 (try 1/3)
>[58050.311064] wlan0: authenticated
>[58050.311089] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[58050.314038] wlan0: associate with 00:0f:24:d6:c7:a0 (try 1/3)
>[58050.316255] wlan0: RX AssocResp from 00:0f:24:d6:c7:a0 (capab=0x431 status=0 aid=59)
>[58050.317576] wlan0: associated
>[58050.317607] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[59596.750101] usb 4-2: USB disconnect, device number 7
>[59598.910832] wlan0: deauthenticating from 00:0f:24:d6:c7:a0 by local choice (reason=3)
>[59598.956149] cfg80211: Calling CRDA to update world regulatory domain
>[59614.330861] PM: Syncing filesystems ... done.
>[59614.739840] PM: Preparing system for mem sleep
>[59625.466397] Freezing user space processes ... (elapsed 0.39 seconds) done.
>[59625.863697] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[59625.874680] PM: Entering mem sleep
>[59625.874723] Suspending console(s) (use no_console_suspend to debug)
>[59625.885965] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[59625.886318] sd 0:0:0:0: [sda] Stopping disk
>[59626.010514] i8042 aux 00:0a: wake-up capability disabled by ACPI
>[59626.011410] i8042 kbd 00:09: wake-up capability enabled by ACPI
>[59626.812545] PM: suspend of devices complete after 926.714 msecs
>[59626.812786] PM: late suspend of devices complete after 0.234 msecs
>[59626.867229] PM: noirq suspend of devices complete after 54.439 msecs
>[59626.867511] ACPI: Preparing to enter system sleep state S3
>[59626.869127] PM: Saving platform NVS memory
>[59626.869220] Disabling non-boot CPUs ...
>[59626.870672] smpboot: CPU 1 is now offline
>[59626.871707] CPU 1 offline: Remove Rx thread
>[59626.871842] Extended CMOS year: 2000
>[59626.871842] ACPI: Low-level resume complete
>[59626.871842] PM: Restoring platform NVS memory
>[59626.871842] Extended CMOS year: 2000
>[59626.871842] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02
>[59626.872200] Enabling non-boot CPUs ...
>[59626.872308] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[59626.870515] Initializing CPU#1
>[59626.885080] bnx2i: CPU 1 online: Create Rx thread
>[59626.885405] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02
>[59626.886040] CPU1 is up
>[59626.887666] ACPI: Waking up from system sleep state S3
>[59626.979083] firewire_ohci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
>[59626.979086] firewire_ohci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
>[59627.001256] PM: noirq resume of devices complete after 110.080 msecs
>[59627.001430] PM: early resume of devices complete after 0.095 msecs
>[59627.001467] i915 0000:00:02.0: setting latency timer to 64
>[59627.001615] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[59627.001753] usb usb3: root hub lost power or was reset
>[59627.002016] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[59627.002225] usb usb4: root hub lost power or was reset
>[59627.002461] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[59627.004104] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[59627.005058] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[59627.005304] usb usb5: root hub lost power or was reset
>[59627.005490] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[59627.005729] usb usb6: root hub lost power or was reset
>[59627.005957] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[59627.006193] usb usb7: root hub lost power or was reset
>[59627.006332] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[59627.006705] pci 0000:00:1e.0: setting latency timer to 64
>[59627.006978] ata_piix 0000:00:1f.1: setting latency timer to 64
>[59627.007128] ahci 0000:00:1f.2: setting latency timer to 64
>[59627.007841] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59627.008857] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59627.079526] i8042 kbd 00:09: wake-up capability disabled by ACPI
>[59627.134266] r8169 0000:08:00.0: p3p1: link down
>[59627.283460] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
>[59627.283464] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
>[59627.305792] ata4.00: configured for MWDMA2
>[59627.315499] ata3: SATA link down (SStatus 0 SControl 300)
>[59627.315533] ata2: SATA link down (SStatus 0 SControl 300)
>[59627.562528] firewire_core 0000:09:09.0: rediscovered device fw0
>[59629.098497] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[59629.099338] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[59629.100376] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[59629.100381] ata1.00: configured for UDMA/100
>[59629.111566] sd 0:0:0:0: [sda] Starting disk
>[59629.131710] PM: resume of devices complete after 2130.274 msecs
>[59629.131948] PM: Finishing wakeup.
>[59629.131950] Restarting tasks ... done.
>[59629.146278] video LNXVIDEO:01: Restoring backlight state
>[59629.205363] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59629.262415] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59629.319412] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59629.376417] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
>[59629.495070] usb 4-2: new low-speed USB device number 8 using uhci_hcd
>[59629.659254] usb 4-2: New USB device found, idVendor=045e, idProduct=00f6
>[59629.659263] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[59629.659269] usb 4-2: Product: Comfort Optical Mouse 1000
>[59629.659275] usb 4-2: Manufacturer: Microsoft
>[59629.678279] input: Microsoft Comfort Optical Mouse 1000 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input25
>[59629.678714] hid-generic 0003:045E:00F6.000D: input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1a.1-2/input0
>[59649.052611] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[59649.457310] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[59649.528492] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[59649.553248] r8169 0000:08:00.0: p3p1: link down
>[59649.553345] IPv6: ADDRCONF(NETDEV_UP): p3p1: link is not ready
>[59661.022120] cfg80211: World regulatory domain updated:
>[59661.022126] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59661.022129] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59661.022132] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59661.022135] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>[59661.022138] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59661.022141] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>[59661.022154] cfg80211: Calling CRDA for country: PT
>[59661.284635] wlan0: authenticate with 00:14:a9:9d:16:50
>[59661.286362] wlan0: send auth to 00:14:a9:9d:16:50 (try 1/3)
>[59661.288116] wlan0: authenticated
>[59661.288145] iwl3945 0000:02:00.0: wlan0: disabling HT as WMM/QoS is not supported
>[59661.289030] wlan0: associate with 00:14:a9:9d:16:50 (try 1/3)
>[59661.293335] wlan0: RX AssocResp from 00:14:a9:9d:16:50 (capab=0x431 status=0 aid=6)
>[59661.296424] wlan0: associated
>[59661.296461] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[59662.433357] cfg80211: Regulatory domain changed to country: PT
>[59662.433362] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>[59662.433365] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[59662.433368] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[59662.433371] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>[59662.433373] cfg80211:   (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
>[59736.878014] Adjusting hpet more than 11% (-1691259612 vs -1693699389)

Actions: View

Attachments on bug 880771: 653032 | 653033 | 653034 | 653035 | 653036 | 653037