Attachment 661197 Details for Bug 885903 – iw list output of the card

iw list output of the card

iw_list.txt (text/plain), 5.23 KB, created by Aleksandar Kostadinov on 2012-12-10 23:57:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Aleksandar Kostadinov

Created: 2012-12-10 23:57:47 UTC

Size: 5.23 KB

patch

obsolete

>Wiphy phy0
>	Band 1:
>		Capabilities: 0x872
>			HT20/HT40
>			Static SM Power Save
>			RX Greenfield
>			RX HT20 SGI
>			RX HT40 SGI
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			No DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT TX/RX MCS rate indexes supported: 0-23, 32
>		Frequencies:
>			* 2412 MHz [1] (15.0 dBm)
>			* 2417 MHz [2] (15.0 dBm)
>			* 2422 MHz [3] (15.0 dBm)
>			* 2427 MHz [4] (15.0 dBm)
>			* 2432 MHz [5] (15.0 dBm)
>			* 2437 MHz [6] (15.0 dBm)
>			* 2442 MHz [7] (15.0 dBm)
>			* 2447 MHz [8] (15.0 dBm)
>			* 2452 MHz [9] (15.0 dBm)
>			* 2457 MHz [10] (15.0 dBm)
>			* 2462 MHz [11] (15.0 dBm)
>			* 2467 MHz [12] (15.0 dBm) (passive scanning, no IBSS)
>			* 2472 MHz [13] (15.0 dBm) (passive scanning, no IBSS)
>		Bitrates (non-HT):
>			* 1.0 Mbps
>			* 2.0 Mbps (short preamble supported)
>			* 5.5 Mbps (short preamble supported)
>			* 11.0 Mbps (short preamble supported)
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>	Band 2:
>		Capabilities: 0x872
>			HT20/HT40
>			Static SM Power Save
>			RX Greenfield
>			RX HT20 SGI
>			RX HT40 SGI
>			No RX STBC
>			Max AMSDU length: 7935 bytes
>			No DSSS/CCK HT40
>		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
>		Minimum RX AMPDU time spacing: 4 usec (0x05)
>		HT TX/RX MCS rate indexes supported: 0-23, 32
>		Frequencies:
>			* 5180 MHz [36] (15.0 dBm) (passive scanning, no IBSS)
>			* 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)
>			* 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)
>			* 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)
>			* 5260 MHz [52] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5500 MHz [100] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5520 MHz [104] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5540 MHz [108] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5560 MHz [112] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5580 MHz [116] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5600 MHz [120] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5620 MHz [124] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5640 MHz [128] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5660 MHz [132] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5680 MHz [136] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5700 MHz [140] (15.0 dBm) (passive scanning, no IBSS, radar detection)
>			* 5745 MHz [149] (15.0 dBm) (passive scanning, no IBSS)
>			* 5765 MHz [153] (15.0 dBm) (passive scanning, no IBSS)
>			* 5785 MHz [157] (15.0 dBm) (passive scanning, no IBSS)
>			* 5805 MHz [161] (15.0 dBm) (passive scanning, no IBSS)
>			* 5825 MHz [165] (15.0 dBm) (passive scanning, no IBSS)
>		Bitrates (non-HT):
>			* 6.0 Mbps
>			* 9.0 Mbps
>			* 12.0 Mbps
>			* 18.0 Mbps
>			* 24.0 Mbps
>			* 36.0 Mbps
>			* 48.0 Mbps
>			* 54.0 Mbps
>	max # scan SSIDs: 20
>	max scan IEs length: 95 bytes
>	Coverage class: 0 (up to 0m)
>	Supported Ciphers:
>		* WEP40 (00-0f-ac:1)
>		* WEP104 (00-0f-ac:5)
>		* TKIP (00-0f-ac:2)
>		* CCMP (00-0f-ac:4)
>	Available Antennas: TX 0 RX 0
>	Supported interface modes:
>		 * IBSS
>		 * managed
>		 * monitor
>	software interface modes (can always be added):
>		 * monitor
>	interface combinations are not supported
>	Supported commands:
>		 * new_interface
>		 * set_interface
>		 * new_key
>		 * start_ap
>		 * new_station
>		 * new_mpath
>		 * set_mesh_config
>		 * set_bss
>		 * authenticate
>		 * associate
>		 * deauthenticate
>		 * disassociate
>		 * join_ibss
>		 * join_mesh
>		 * remain_on_channel
>		 * set_tx_bitrate_mask
>		 * frame
>		 * frame_wait_cancel
>		 * set_wiphy_netns
>		 * set_channel
>		 * set_wds_peer
>		 * probe_client
>		 * set_noack_map
>		 * register_beacons
>		 * connect
>		 * disconnect
>	Supported TX frame types:
>		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
>	Supported RX frame types:
>		 * IBSS: 0xb0 0xc0 0xd0
>		 * managed: 0x40 0xd0
>		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>		 * mesh point: 0xb0 0xc0 0xd0
>		 * P2P-client: 0x40 0xd0
>		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
>	Device supports RSN-IBSS.
>	HT Capability overrides:
>		 * MCS: ff ff ff ff ff ff ff ff ff ff
>		 * maximum A-MSDU length
>		 * supported channel width
>		 * short GI for 40 MHz
>		 * max A-MPDU length exponent
>		 * min MPDU start spacing
>	Device supports TX status socket option.
>	Device supports HT-IBSS.

Actions: View

Attachments on bug 885903: 661197